Machine description: shard-lnl-3
Result:
i915_display_info10 igt_runner10 results10.json results10-xe-load.json i915_display_info_post_exec10 boot10 dmesg10
Detail | Value |
---|---|
Duration | 3.61 seconds |
Hostname |
shard-lnl-3 |
Igt-Version |
IGT-Version: 1.30-g4ef742fae (x86_64) (Linux: 6.14.0-rc4-xe+ x86_64) |
Out |
Using IGT_SRANDOM=1740997066 for randomisation Opened device: /dev/dri/card0 DMC: fw loaded: yes Starting subtest: dc5-psr Stack trace: #0 ../lib/igt_core.c:2055 __igt_fail_assert() #1 [check_dc_counter.part.0+0x66] #2 ../tests/intel/kms_pm_dc.c:450 test_dc_state_psr() #3 ../tests/intel/kms_pm_dc.c:798 __igt_unique____real_main763() #4 [main+0x2d] #5 [__libc_init_first+0x8a] #6 [__libc_start_main+0x8b] #7 [_start+0x25] Subtest dc5-psr: FAIL (3.613s) |
Err |
Starting subtest: dc5-psr (kms_pm_dc:6568) CRITICAL: Test assertion failure function check_dc_counter, file ../tests/intel/kms_pm_dc.c:312: (kms_pm_dc:6568) CRITICAL: Failed assertion: dc_state_wait_entry(data->debugfs_fd, dc_flag, prev_dc_count) (kms_pm_dc:6568) CRITICAL: DC5 state is not achieved i915_power_domain_info: Runtime power status: enabled Power well/domain Use count always-on 4 DISPLAY_CORE 0 PIPE_A 1 PIPE_B 0 PIPE_C 0 PIPE_D 0 PIPE_PANEL_FITTER_A 0 PIPE_PANEL_FITTER_B 0 PIPE_PANEL_FITTER_C 0 PIPE_PANEL_FITTER_D 0 TRANSCODER_A 1 TRANSCODER_B 0 TRANSCODER_C 0 TRANSCODER_D 0 TRANSCODER_EDP 0 TRANSCODER_DSI_A 0 TRANSCODER_DSI_C 0 TRANSCODER_VDSC_PW2 0 PORT_DDI_LANES_A 1 PORT_DDI_LANES_B 0 PORT_DDI_LANES_C 0 PORT_DDI_LANES_D 0 PORT_DDI_LANES_E 0 PORT_DDI_LANES_F 0 PORT_DDI_LANES_TC1 0 PORT_DDI_LANES_TC2 0 PORT_DDI_LANES_TC3 0 PORT_DDI_LANES_TC4 0 PORT_DDI_LANES_TC5 0 PORT_DDI_LANES_TC6 0 PORT_DDI_IO_A 0 PORT_DDI_IO_B 0 PORT_DDI_IO_C 0 PORT_DDI_IO_D 0 PORT_DDI_IO_E 0 PORT_DDI_IO_F 0 PORT_DDI_IO_TC1 0 PORT_DDI_IO_TC2 0 PORT_DDI_IO_TC3 0 PORT_DDI_IO_TC4 0 PORT_DDI_IO_TC5 0 PORT_DDI_IO_TC6 0 PORT_DSI 0 PORT_CRT 0 PORT_OTHER 0 VGA 0 AUDIO_MMIO 0 AUDIO_PLAYBACK 0 AUX_IO_A 1 AUX_IO_B 0 AUX_IO_C 0 AUX_IO_D 0 AUX_IO_E 0 AUX_IO_F 0 AUX_A 0 AUX_B 0 AUX_C 0 AUX_D 0 AUX_E 0 AUX_F 0 AUX_USBC1 0 AUX_USBC2 0 AUX_USBC3 0 AUX_USBC4 0 AUX_USBC5 0 AUX_USBC6 0 AUX_TBT1 0 AUX_TBT2 0 AUX_TBT3 0 AUX_TBT4 0 AUX_TBT5 0 AUX_TBT6 0 GMBUS 0 GT_IRQ 0 DC_OFF 0 TC_COLD_OFF 0 INIT 0 PW_1 0 DC_off 0 PIPE_C 0 PIPE_D 0 PIPE_PANEL_FITTER_C 0 PIPE_PANEL_FITTER_D 0 TRANSCODER_C 0 TRANSCODER_D 0 AUDIO_MMIO 0 DC_OFF 0 INIT 0 PW_2 0 PIPE_B 0 PIPE_C 0 PIPE_D 0 PIPE_PANEL_FITTER_B 0 PIPE_PANEL_FITTER_C 0 PIPE_PANEL_FITTER_D 0 TRANSCODER_B 0 TRANSCODER_C 0 TRANSCODER_D 0 PORT_DDI_LANES_TC1 0 PORT_DDI_LANES_TC2 0 PORT_DDI_LANES_TC3 0 PORT_DDI_LANES_TC4 0 VGA 0 AUDIO_PLAYBACK 0 INIT 0 PW_A 1 PIPE_A 1 PIPE_PANEL_FITTER_A 0 INIT 0 PW_B 0 PIPE_B 0 PIPE_PANEL_FITTER_B 0 TRANSCODER_B 0 INIT 0 PW_C 0 PIPE_C 0 PIPE_PANEL_FITTER_C 0 TRANSCODER_C 0 INIT 0 PW_D 0 PIPE_D 0 PIPE_PANEL_FITTER_D 0 TRANSCODER_D 0 INIT 0 AUX_A 1 AUX_IO_A 1 AUX_A 0 AUX_B 0 AUX_IO_B 0 AUX_B 0 AUX_TC1 0 AUX_USBC1 0 AUX_TBT1 0 AUX_TC2 0 AUX_USBC2 0 AUX_TBT2 0 AUX_TC3 0 AUX_USBC3 0 AUX_TBT3 0 AUX_TC4 0 AUX_USBC4 0 AUX_TBT4 0 PICA_TC 0 PORT_DDI_LANES_TC1 0 PORT_DDI_LANES_TC2 0 PORT_DDI_LANES_TC3 0 PORT_DDI_LANES_TC4 0 AUX_USBC1 0 AUX_USBC2 0 AUX_USBC3 0 AUX_USBC4 0 AUX_TBT1 0 AUX_TBT2 0 AUX_TBT3 0 AUX_TBT4 0 INIT 0 Subtest dc5-psr failed. **** DEBUG **** (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane B.1 "alpha" to 0xffff/65535 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane B.1 "FB_DAMAGE_CLIPS" to 0x0/0 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane B.1 "SCALING_FILTER" to 0x0/0 (kms_pm_dc:6568) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_pm_dc:6568) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 2 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetPlane pipe B, plane 2, disabling (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane B.2 "rotation" to 0x1/1 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane B.2 "COLOR_ENCODING" to 0x0/0 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane B.2 "COLOR_RANGE" to 0x0/0 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane B.2 "pixel blend mode" to 0x0/0 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane B.2 "alpha" to 0xffff/65535 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane B.2 "FB_DAMAGE_CLIPS" to 0x0/0 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane B.2 "SCALING_FILTER" to 0x0/0 (kms_pm_dc:6568) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_pm_dc:6568) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 3 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetPlane pipe B, plane 3, disabling (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane B.3 "rotation" to 0x1/1 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane B.3 "COLOR_ENCODING" to 0x0/0 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane B.3 "COLOR_RANGE" to 0x0/0 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane B.3 "pixel blend mode" to 0x0/0 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane B.3 "alpha" to 0xffff/65535 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane B.3 "FB_DAMAGE_CLIPS" to 0x0/0 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane B.3 "SCALING_FILTER" to 0x0/0 (kms_pm_dc:6568) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_pm_dc:6568) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 4 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetPlane pipe B, plane 4, disabling (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane B.4 "rotation" to 0x1/1 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane B.4 "COLOR_ENCODING" to 0x0/0 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane B.4 "COLOR_RANGE" to 0x0/0 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane B.4 "pixel blend mode" to 0x0/0 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane B.4 "alpha" to 0xffff/65535 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane B.4 "FB_DAMAGE_CLIPS" to 0x0/0 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane B.4 "SCALING_FILTER" to 0x0/0 (kms_pm_dc:6568) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_pm_dc:6568) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 5 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_pm_dc:6568) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_pm_dc:6568) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_pm_dc:6568) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_pm_dc:6568) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_pm_dc:6568) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 1 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetPlane pipe C, plane 1, disabling (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane C.1 "rotation" to 0x1/1 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane C.1 "COLOR_ENCODING" to 0x0/0 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane C.1 "COLOR_RANGE" to 0x0/0 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane C.1 "pixel blend mode" to 0x0/0 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane C.1 "alpha" to 0xffff/65535 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane C.1 "FB_DAMAGE_CLIPS" to 0x0/0 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane C.1 "SCALING_FILTER" to 0x0/0 (kms_pm_dc:6568) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_pm_dc:6568) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 2 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetPlane pipe C, plane 2, disabling (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane C.2 "rotation" to 0x1/1 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane C.2 "COLOR_ENCODING" to 0x0/0 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane C.2 "COLOR_RANGE" to 0x0/0 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane C.2 "pixel blend mode" to 0x0/0 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane C.2 "alpha" to 0xffff/65535 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane C.2 "FB_DAMAGE_CLIPS" to 0x0/0 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane C.2 "SCALING_FILTER" to 0x0/0 (kms_pm_dc:6568) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_pm_dc:6568) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 3 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetPlane pipe C, plane 3, disabling (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane C.3 "rotation" to 0x1/1 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane C.3 "COLOR_ENCODING" to 0x0/0 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane C.3 "COLOR_RANGE" to 0x0/0 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane C.3 "pixel blend mode" to 0x0/0 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane C.3 "alpha" to 0xffff/65535 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane C.3 "FB_DAMAGE_CLIPS" to 0x0/0 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane C.3 "SCALING_FILTER" to 0x0/0 (kms_pm_dc:6568) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_pm_dc:6568) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 4 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetPlane pipe C, plane 4, disabling (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane C.4 "rotation" to 0x1/1 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane C.4 "COLOR_ENCODING" to 0x0/0 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane C.4 "COLOR_RANGE" to 0x0/0 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane C.4 "pixel blend mode" to 0x0/0 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane C.4 "alpha" to 0xffff/65535 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane C.4 "FB_DAMAGE_CLIPS" to 0x0/0 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetProp plane C.4 "SCALING_FILTER" to 0x0/0 (kms_pm_dc:6568) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_pm_dc:6568) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 5 (kms_pm_dc:6568) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_pm_dc:6568) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_pm_dc:6568) igt_kms-DEBUG: display: } (kms_pm_dc:6568) DEBUG: Test requirement passed: !psr_disabled_check(data->debugfs_fd) (kms_pm_dc:6568) igt_psr-DEBUG: Test requirement passed: !(strstr(buf, "PSR sink not reliable: yes")) (kms_pm_dc:6568) igt_psr-DEBUG: Test requirement passed: !(strstr(buf, "PSR sink not reliable: yes")) (kms_pm_dc:6568) igt_psr-DEBUG: Test requirement passed: !(strstr(buf, "PSR sink not reliable: yes")) (kms_pm_dc:6568) igt_psr-DEBUG: Test requirement passed: !(strstr(buf, "PSR sink not reliable: yes")) (kms_pm_dc:6568) igt_psr-DEBUG: Test requirement passed: !(strstr(buf, "PSR sink not reliable: yes")) (kms_pm_dc:6568) igt_psr-DEBUG: Test requirement passed: !(strstr(buf, "PSR sink not reliable: yes")) (kms_pm_dc:6568) igt_psr-DEBUG: Test requirement passed: !(strstr(buf, "PSR sink not reliable: yes")) (kms_pm_dc:6568) igt_psr-DEBUG: psr_active_check(debugfs_fd, mode, output) took 116ms (kms_pm_dc:6568) CRITICAL: Test assertion failure function check_dc_counter, file ../tests/intel/kms_pm_dc.c:312: (kms_pm_dc:6568) CRITICAL: Failed assertion: dc_state_wait_entry(data->debugfs_fd, dc_flag, prev_dc_count) (kms_pm_dc:6568) CRITICAL: DC5 state is not achieved i915_power_domain_info: Runtime power status: enabled Power well/domain Use count always-on 4 DISPLAY_CORE 0 PIPE_A 1 PIPE_B 0 PIPE_C 0 PIPE_D 0 PIPE_PANEL_FITTER_A 0 PIPE_PANEL_FITTER_B 0 PIPE_PANEL_FITTER_C 0 PIPE_PANEL_FITTER_D 0 TRANSCODER_A 1 TRANSCODER_B 0 TRANSCODER_C 0 TRANSCODER_D 0 TRANSCODER_EDP 0 TRANSCODER_DSI_A 0 TRANSCODER_DSI_C 0 TRANSCODER_VDSC_PW2 0 PORT_DDI_LANES_A 1 PORT_DDI_LANES_B 0 PORT_DDI_LANES_C 0 PORT_DDI_LANES_D 0 PORT_DDI_LANES_E 0 PORT_DDI_LANES_F 0 PORT_DDI_LANES_TC1 0 PORT_DDI_LANES_TC2 0 PORT_DDI_LANES_TC3 0 PORT_DDI_LANES_TC4 0 PORT_DDI_LANES_TC5 0 PORT_DDI_LANES_TC6 0 PORT_DDI_IO_A 0 PORT_DDI_IO_B 0 PORT_DDI_IO_C 0 PORT_DDI_IO_D 0 PORT_DDI_IO_E 0 PORT_DDI_IO_F 0 PORT_DDI_IO_TC1 0 PORT_DDI_IO_TC2 0 PORT_DDI_IO_TC3 0 PORT_DDI_IO_TC4 0 PORT_DDI_IO_TC5 0 PORT_DDI_IO_TC6 0 PORT_DSI 0 PORT_CRT 0 PORT_OTHER 0 VGA 0 AUDIO_MMIO 0 AUDIO_PLAYBACK 0 AUX_IO_A 1 AUX_IO_B 0 AUX_IO_C 0 AUX_IO_D 0 AUX_IO_E 0 AUX_IO_F 0 AUX_A 0 AUX_B 0 AUX_C 0 AUX_D 0 AUX_E 0 AUX_F 0 AUX_USBC1 0 AUX_USBC2 0 AUX_USBC3 0 AUX_USBC4 0 AUX_USBC5 0 AUX_USBC6 0 AUX_TBT1 0 AUX_TBT2 0 AUX_TBT3 0 AUX_TBT4 0 AUX_TBT5 0 AUX_TBT6 0 GMBUS 0 GT_IRQ 0 DC_OFF 0 TC_COLD_OFF 0 INIT 0 PW_1 0 DC_off 0 PIPE_C 0 PIPE_D 0 PIPE_PANEL_FITTER_C 0 PIPE_PANEL_FITTER_D 0 TRANSCODER_C 0 TRANSCODER_D 0 AUDIO_MMIO 0 DC_OFF 0 INIT 0 PW_2 0 PIPE_B 0 PIPE_C 0 PIPE_D 0 PIPE_PANEL_FITTER_B 0 PIPE_PANEL_FITTER_C 0 PIPE_PANEL_FITTER_D 0 TRANSCODER_B 0 TRANSCODER_C 0 TRANSCODER_D 0 PORT_DDI_LANES_TC1 0 PORT_DDI_LANES_TC2 0 PORT_DDI_LANES_TC3 0 PORT_DDI_LANES_TC4 0 VGA 0 AUDIO_PLAYBACK 0 INIT 0 PW_A 1 PIPE_A 1 PIPE_PANEL_FITTER_A 0 INIT 0 PW_B 0 PIPE_B 0 PIPE_PANEL_FITTER_B 0 TRANSCODER_B 0 INIT 0 PW_C 0 PIPE_C 0 PIPE_PANEL_FITTER_C 0 TRANSCODER_C 0 INIT 0 PW_D 0 PIPE_D 0 PIPE_PANEL_FITTER_D 0 TRANSCODER_D 0 INIT 0 AUX_A 1 AUX_IO_A 1 AUX_A 0 AUX_B 0 AUX_IO_B 0 AUX_B 0 AUX_TC1 0 AUX_USBC1 0 AUX_TBT1 0 AUX_TC2 0 AUX_USBC2 0 AUX_TBT2 0 AUX_TC3 0 AUX_USBC3 0 AUX_TBT3 0 AUX_TC4 0 AUX_USBC4 0 AUX_TBT4 0 PICA_TC 0 PORT_DDI_LANES_TC1 0 PORT_DDI_LANES_TC2 0 PORT_DDI_LANES_TC3 0 PORT_DDI_LANES_TC4 0 AUX_USBC1 0 AUX_USBC2 0 AUX_USBC3 0 AUX_USBC4 0 AUX_TBT1 0 AUX_TBT2 0 AUX_TBT3 0 AUX_TBT4 0 INIT 0 (kms_pm_dc:6568) igt_core-INFO: Stack trace: (kms_pm_dc:6568) igt_core-INFO: #0 ../lib/igt_core.c:2055 __igt_fail_assert() (kms_pm_dc:6568) igt_core-INFO: #1 [check_dc_counter.part.0+0x66] (kms_pm_dc:6568) igt_core-INFO: #2 ../tests/intel/kms_pm_dc.c:450 test_dc_state_psr() (kms_pm_dc:6568) igt_core-INFO: #3 ../tests/intel/kms_pm_dc.c:798 __igt_unique____real_main763() (kms_pm_dc:6568) igt_core-INFO: #4 [main+0x2d] (kms_pm_dc:6568) igt_core-INFO: #5 [__libc_init_first+0x8a] (kms_pm_dc:6568) igt_core-INFO: #6 [__libc_start_main+0x8b] (kms_pm_dc:6568) igt_core-INFO: #7 [_start+0x25] **** END **** Subtest dc5-psr: FAIL (3.613s) |
Dmesg |
<7> [573.164502] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [573.164616] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [573.164694] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<6> [573.178555] Console: switching to colour dummy device 80x25
<6> [573.178848] [IGT] kms_pm_dc: executing
<7> [574.108438] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7> [574.108425] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7> [574.108564] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7> [574.195443] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7> [574.195505] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7> [574.195921] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7> [574.196204] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7> [574.197101] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7> [574.197135] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7> [574.197606] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7> [574.197863] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7> [574.198541] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7> [574.198561] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7> [574.198805] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7> [574.199002] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7> [574.199748] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7> [574.199766] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7> [574.200653] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7> [574.201347] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [574.201643] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [574.201932] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [574.202254] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5> [574.202271] [drm] DisplayID checksum invalid, remainder is 248
<5> [574.202275] [drm] DisplayID checksum invalid, remainder is 248
<7> [574.202279] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5> [574.202286] [drm] DisplayID checksum invalid, remainder is 248
<7> [574.202290] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5> [574.202298] [drm] DisplayID checksum invalid, remainder is 248
<7> [574.202301] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5> [574.202308] [drm] DisplayID checksum invalid, remainder is 248
<7> [574.202361] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7> [574.202621] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [574.203530] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [574.203659] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<5> [574.204801] [drm] DisplayID checksum invalid, remainder is 248
<5> [574.204807] [drm] DisplayID checksum invalid, remainder is 248
<5> [574.204810] [drm] DisplayID checksum invalid, remainder is 248
<7> [574.204890] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7> [574.204915] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [574.204962] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7> [574.204984] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7> [574.205255] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7> [574.205299] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7> [574.205338] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7> [574.205604] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7> [574.205645] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7> [574.205666] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7> [574.205983] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<6> [574.207723] [IGT] kms_pm_dc: starting subtest dc5-psr
<7> [574.207942] xe 0000:00:02.0: [drm:i915_edp_psr_debug_set [xe]] Setting PSR debug to f
<7> [574.208043] xe 0000:00:02.0: [drm:intel_psr_debug_set [xe]] Invalid debug mask f
<7> [574.208148] xe 0000:00:02.0: [drm:i915_edp_psr_debug_set [xe]] Setting PSR debug to 43
<7> [574.208374] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:189:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [574.208480] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:188:DDI A/PHY A][CRTC:82:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7> [574.208566] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7> [574.208647] xe 0000:00:02.0: [drm:intel_psr_compute_config [xe]] Selective update disabled by flag
<7> [574.208720] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [574.208802] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:188:DDI A/PHY A] [CRTC:82:pipe A]
<7> [574.208951] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [fastset]
<7> [574.209034] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [574.209121] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [574.209199] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [574.209269] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [574.209345] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [574.209411] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [574.209481] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7> [574.209546] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [574.209615] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [574.209679] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [574.209741] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7> [574.209803] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [574.209866] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [574.209931] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 2, length 8
<7> [574.209993] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [574.210055] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [574.210116] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [574.210176] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [574.210237] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [574.210297] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [574.210369] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0
<7> [574.210432] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1906, vmax: 2859, flipline: 1906, pipeline full: 0, guardband: 106 vsync start: 103, vsync end: 97
<7> [574.210498] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1800, vmax vblank: 2753, vmin vtotal: 1906, vmax vtotal: 2859
<7> [574.210562] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [574.210622] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [574.210681] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [574.210740] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [574.210798] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [574.210857] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710
<7> [574.210916] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7> [574.210973] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [574.211031] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [574.211089] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [574.211146] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000
<7> [574.211204] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [574.211261] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [574.211323] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [574.211379] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [574.211440] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [574.211500] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [574.211559] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [574.211615] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [574.211670] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [574.211725] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [574.211780] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [574.211836] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [574.211891] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:32:plane 1A] fb: [FB:190] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [574.211948] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [574.212003] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [574.212076] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [574.212144] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [574.212253] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2
<7> [574.229271] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [574.230292] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:189:eDP-1]
<7> [574.230405] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:82:pipe A]
<7> [574.232830] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:228]
<7> [574.249352] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [574.249573] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [574.249743] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [574.266708] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [574.266872] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [574.362734] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:82:pipe A]
<7> [574.362875] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CONNECTOR:189:eDP-1]
<7> [574.405460] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:134:pipe B]
<7> [574.412873] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:186:pipe C]
<7> [574.448333] xe 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe A
<7> [574.465384] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [574.465987] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [574.466521] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [575.260545] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7> [575.260683] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7> [575.260731] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7> [576.732337] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD off
<7> [576.732641] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
<6> [577.821647] [IGT] kms_pm_dc: finished subtest dc5-psr, FAIL
<7> [577.821876] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:228] from all active usage due to RMFB ioctl
<7> [577.821920] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:32:plane 1A] because [FB:228] is removed
<7> [577.821984] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0
<7> [577.822106] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [577.822179] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] lines 1, 12, 12, 12, 11, 12, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [577.822245] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] blocks 24, 289, 289, 289, 265, 289, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [577.822307] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] min_ddb 28, 319, 319, 319, 293, 319, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [577.822370] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:82:pipe A] data rate 0 num active planes 0
<7> [577.822466] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [577.822557] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [577.822646] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [577.822733] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [577.822820] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [577.823113] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [577.823458] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [577.823599] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [577.829039] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7> [577.829174] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7> [577.845656] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:32:plane 1A]
<7> [577.863978] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054
<7> [577.864350] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [577.864603] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 12, 12, 12, 11, 12, 0, 0, 0, 3, 0
<7> [577.864830] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 289, 289, 289, 265, 289, 0, 0, 38, 73, 87
<7> [577.865087] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 319, 319, 319, 293, 319, 0, 0, 39, 82, 88
<7> [577.865311] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:82:pipe A] data rate 1390840 num active planes 1
<7> [577.865647] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [577.865966] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [577.866281] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [577.866561] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [577.866838] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [577.868212] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 11059200 bytes of contiguous stolen space for FBC, limit: 2
<7> [577.868429] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:32:plane 1A]
<7> [577.879024] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [577.880306] xe 0000:00:02.0: [drm:drm_client_dev_restore] intel-fbdev: ret=0
<6> [577.881718] [IGT] kms_pm_dc: exiting, ret=98
<7> [577.883315] xe 0000:00:02.0: [drm:i915_edp_psr_debug_set [xe]] Setting PSR debug to 0
<7> [577.883974] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:189:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [577.884485] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:188:DDI A/PHY A][CRTC:82:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7> [577.884845] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7> [577.885224] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [577.885583] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:188:DDI A/PHY A] [CRTC:82:pipe A]
<7> [577.886154] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [fastset]
<7> [577.886513] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [577.886865] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [577.887227] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [577.887573] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [577.887889] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [577.888342] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [577.888643] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7> [577.888926] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [577.889223] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [577.889499] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [577.889757] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [577.890027] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [577.890277] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [577.890515] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7> [577.890752] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [577.890999] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [577.891223] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [577.891441] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [577.891647] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [577.891851] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [577.892065] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0
<7> [577.892257] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1906, vmax: 2859, flipline: 1906, pipeline full: 0, guardband: 106 vsync start: 103, vsync end: 97
<7> [577.892451] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1800, vmax vblank: 2753, vmin vtotal: 1906, vmax vtotal: 2859
<7> [577.892633] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [577.892817] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [577.893252] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [577.893422] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [577.893583] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [577.893743] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710
<7> [577.893896] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7> [577.894057] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [577.894209] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [577.894353] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [577.894496] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000
<7> [577.894636] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [577.894773] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [577.894905] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [577.895043] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [577.895176] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [577.895303] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [577.895429] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [577.895549] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [577.895667] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [577.895784] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [577.895896] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [577.896015] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [577.896130] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:32:plane 1A] fb: [FB:190] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [577.896241] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [577.896349] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [577.896515] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [577.912335] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7> [577.913852] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:189:eDP-1]
<7> [577.914077] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:82:pipe A]
<6> [577.929409] Console: switching to colour frame buffer device 180x56
<7> [577.963010] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [577.963131] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [577.963221] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
|