Results for igt@xe_module_load@load

Machine description: bat-bmg-2

Result: Pass

igt_runner0 results0.json i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.71 seconds
Igt-Version 
IGT-Version: 1.30-g8cb34f260 (x86_64) (Linux: 6.14.0-rc4-xe+ x86_64)
Out 
Using IGT_SRANDOM=1740614248 for randomisation
Starting subtest: load
Opened device: /dev/dri/card0
Subtest load: SUCCESS (0.715s)
Err 
Starting subtest: load
Subtest load: SUCCESS (0.715s)
Dmesg
<6> [209.560371] [IGT] xe_module_load: executing
<6> [209.565873] [IGT] xe_module_load: starting subtest load
<5> [209.788744] Setting dangerous option force_probe - tainting kernel
<6> [209.791387] xe 0000:03:00.0: vgaarb: deactivate vga console
<6> [209.793086] xe 0000:03:00.0: [drm] Found battlemage (device ID e20b) discrete display version 14.01 stepping B0
<7> [209.793095] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE e20b:0000 dgfx:1 gfx:Xe2_LPG / Xe2_HPG / Xe3_LPG (20.01) media:Xe2_LPM / Xe2_HPM / Xe3_LPM (13.01) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:1
<7> [209.793197] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] Stepping = (G:A0, M:A1, B:**)
<7> [209.793286] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)
<6> [209.795779] xe 0000:03:00.0: [drm] Using GuC firmware from xe/bmg_guc_70.bin version 70.36.0
<7> [209.799080] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x004693d7
<7> [209.799171] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7> [209.799255] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000
<7> [209.799320] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7> [209.799380] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x00000af8
<7> [209.799440] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0xe20b0000
<7> [209.799500] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7> [209.799559] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7> [209.799617] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7> [209.799675] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7> [209.799738] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7> [209.799800] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7> [209.799859] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7> [209.799918] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7> [209.799977] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [209.800076] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7> [209.801573] xe 0000:03:00.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1800MHz (req 1800MHz), status = 0x00000072 [0x39/00]
<7> [209.806261] xe 0000:03:00.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1800MHz (req 1800MHz), status = 0x00000086 [0x43/00]
<7> [209.806333] xe 0000:03:00.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1800MHz (req 1800MHz), status = 0x00000092 [0x49/00]
<7> [209.806401] xe 0000:03:00.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1800MHz (req 1800MHz), status = 0x80000534 [0x1A/05]
<7> [209.809048] xe 0000:03:00.0: [drm:__xe_guc_upload [xe]] GT0: init took 7ms, freq = 1800MHz (req = 1800MHz), before = 1800MHz, status = 0x8002F034, timeouts = 0
<7> [209.809750] xe 0000:03:00.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7> [209.809822] xe 0000:03:00.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT safe-mode enabled
<7> [209.809909] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,000fffff
<7> [209.809973] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,000fffff
<7> [209.810038] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 000000ff
<7> [209.810100] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7> [209.810162] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,00ffffff
<6> [209.810992] xe 0000:03:00.0: [drm] Using GuC firmware from xe/bmg_guc_70.bin version 70.36.0
<7> [209.812629] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00e8c3d7
<7> [209.812695] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7> [209.812757] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000000
<7> [209.812822] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7> [209.812886] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001f3e
<7> [209.812946] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0xe20b0000
<7> [209.813004] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7> [209.813062] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7> [209.813119] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7> [209.813175] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7> [209.813239] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7> [209.813295] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7> [209.813351] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7> [209.813406] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<6> [209.814909] xe 0000:03:00.0: [drm] Using HuC firmware from xe/bmg_huc.bin version 8.2.10
<7> [209.815159] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [209.815323] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7> [209.816823] xe 0000:03:00.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 1500MHz (req 1500MHz), status = 0x00000072 [0x39/00]
<7> [209.826240] xe 0000:03:00.0: [drm:__xe_guc_upload [xe]] GT1: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034, timeouts = 0
<7> [209.826560] xe 0000:03:00.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7> [209.826634] xe 0000:03:00.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT safe-mode enabled
<7> [209.826716] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,0000ff00
<7> [209.826787] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,0000ff00
<7> [209.826854] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 000000ff
<7> [209.826917] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7> [209.826979] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,00000000
<6> [209.827191] xe 0000:03:00.0: [drm] VISIBLE VRAM: 0x0000004000000000, 0x0000000400000000
<6> [209.827544] xe 0000:03:00.0: [drm] VRAM[0, 0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [209.827546] xe 0000:03:00.0: [drm] VRAM[0, 0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<6> [209.827548] xe 0000:03:00.0: [drm] Total VRAM: 0x0000004000000000, 0x0000000300000000
<6> [209.827549] xe 0000:03:00.0: [drm] Available VRAM: 0x0000004000000000, 0x00000002fb800000
<7> [209.827652] xe 0000:03:00.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 33554432 bytes
<7> [209.827775] xe 0000:03:00.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7> [209.827884] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x0
<7> [209.827977] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion not supported!
<7> [209.828064] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num qgv points 2
<7> [209.828162] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM channels: 6
<7> [209.828256] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Watermark level 0 adjustment needed: yes
<7> [209.828344] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [209.828439] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=19000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [209.828529] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.constprop.0.isra.0 [xe]] QGV 0: deratedbw=33600 peakbw: 48000
<7> [209.828612] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.constprop.0.isra.0 [xe]] QGV 1: deratedbw=53000 peakbw: 456000
<7> [209.828695] xe 0000:03:00.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7> [209.829151] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7> [209.842630] xe 0000:03:00.0: [drm:oprom_get_vbt [xe]] Found valid VBT in SPI flash
<7> [209.842718] xe 0000:03:00.0: [drm:intel_bios_init [xe]] VBT signature "$VBT BATTLEMAGE ", BDB version 257
<7> [209.842801] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7> [209.842881] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7> [209.842964] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7> [209.843045] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7> [209.843131] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 814, min size 848)
<7> [209.843210] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7> [209.843296] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7> [209.843388] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7> [209.843471] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7> [209.843550] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7> [209.843627] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7> [209.843703] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7> [209.843781] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7> [209.843857] xe 0000:03:00.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<7> [209.843933] xe 0000:03:00.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7> [209.844006] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Expected child device config size for VBT version 257 not known; assuming 40
<7> [209.844079] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [209.844155] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [209.844232] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2
<7> [209.844310] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [209.844388] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7> [209.844461] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [209.844534] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT DP max link rate: 1350000
<7> [209.844605] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [209.844682] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT DP max link rate: 1000000
<7> [209.844762] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [209.844838] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [209.844913] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT DP max link rate: 1000000
<7> [209.844990] xe 0000:03:00.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 4000000a
<7> [209.845097] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [209.845227] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7> [209.845352] xe 0000:03:00.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [209.845496] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [209.845659] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [209.845748] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [209.845834] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [209.845944] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<6> [209.846034] xe 0000:03:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=none
<7> [209.846059] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [209.846163] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [209.846253] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [209.846341] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [209.846693] xe 0000:03:00.0: [drm:intel_dmc_init [xe]] Loading i915/bmg_dmc.bin
<7> [209.848202] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7> [209.848327] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7> [209.848421] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7> [209.848509] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x1240108 (EVT_HTP)
<7> [209.848594] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL)
<7> [209.848677] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f008 = 0x40303fe4 (EVT_HTP)
<7> [209.848769] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7> [209.848850] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x96fc0
<7> [209.848929] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling)
<7> [209.849008] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f004 = 0x22e422ac (EVT_HTP)
<7> [209.849090] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling)
<7> [209.849173] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f008 = 0x23d823a0 (EVT_HTP)
<7> [209.849282] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [209.849383] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f00c = 0x25ac2494 (EVT_HTP)
<7> [209.849469] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7> [209.849552] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9efc0
<7> [209.849567] xe 0000:03:00.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7> [209.849631] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling)
<7> [209.849689] xe 0000:03:00.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 200 us
<7> [209.849708] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f404 = 0xa7dca7a4 (EVT_HTP)
<7> [209.849784] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling)
<7> [209.849792] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM0 latency 11 (11.0 usec)
<7> [209.849859] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f408 = 0xa8d0a898 (EVT_HTP)
<7> [209.849880] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM1 latency 40 (40.0 usec)
<7> [209.849936] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [209.849960] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM2 latency 100 (100.0 usec)
<7> [209.850017] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f40c = 0xaaa4a98c (EVT_HTP)
<7> [209.850036] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM3 latency 150 (150.0 usec)
<7> [209.850110] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM4 latency 250 (250.0 usec)
<7> [209.850110] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7> [209.850184] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM5 latency 250 (250.0 usec)
<7> [209.850188] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x53fc0
<7> [209.850264] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM6 latency not provided
<7> [209.850269] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [209.850336] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM7 latency not provided
<7> [209.850346] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x25202408 (EVT_HTP)
<7> [209.850429] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 4:
<7> [209.850506] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5afc0
<7> [209.850583] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [209.850660] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x95209408 (EVT_HTP)
<7> [209.854571] xe 0000:03:00.0: [drm:intel_display_driver_probe_nogem [xe]] 4 display pipes available.
<6> [209.860485] xe 0000:03:00.0: [drm] Finished loading DMC firmware i915/bmg_dmc.bin (v2.6)
<7> [209.860397] xe 0000:03:00.0: [drm:intel_cdclk_dump_config [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [209.860585] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7> [209.860751] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7> [209.860939] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:240:DDI TC1/PHY F] Using AUX CH USBC1 (VBT)
<7> [209.861133] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:240:DDI TC1/PHY F]
<7> [209.861829] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:240:DDI TC1/PHY F]
<7> [209.861985] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:240:DDI TC1/PHY F] Using DDC pin 0x9 (VBT)
<7> [209.862529] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:259:DDI TC2/PHY G] Using AUX CH USBC2 (VBT)
<7> [209.862712] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:259:DDI TC2/PHY G]
<7> [209.863120] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:259:DDI TC2/PHY G]
<7> [209.863275] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:259:DDI TC2/PHY G] Using DDC pin 0xa (VBT)
<7> [209.863555] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:271:DDI TC3/PHY H]
<7> [209.863696] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:271:DDI TC3/PHY H] Using DDC pin 0xb (VBT)
<7> [209.863959] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:275:DDI TC4/PHY I] Using AUX CH USBC4 (VBT)
<7> [209.864133] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:275:DDI TC4/PHY I]
<7> [209.864538] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:275:DDI TC4/PHY I]
<7> [209.864681] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:275:DDI TC4/PHY I] Using DDC pin 0xc (VBT)
<7> [209.865134] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:82:pipe A] hw state readout: disabled
<7> [209.865338] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:134:pipe B] hw state readout: disabled
<7> [209.865522] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:186:pipe C] hw state readout: disabled
<7> [209.865704] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:238:pipe D] hw state readout: disabled
<7> [209.865841] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] hw state readout: disabled, pipe A
<7> [209.865978] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] hw state readout: disabled, pipe A
<7> [209.866114] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] hw state readout: disabled, pipe A
<7> [209.866255] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] hw state readout: disabled, pipe A
<7> [209.866391] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] hw state readout: disabled, pipe A
<7> [209.866525] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] hw state readout: disabled, pipe A
<7> [209.866659] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] hw state readout: disabled, pipe B
<7> [209.866792] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] hw state readout: disabled, pipe B
<7> [209.866925] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] hw state readout: disabled, pipe B
<7> [209.867058] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] hw state readout: disabled, pipe B
<7> [209.867191] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] hw state readout: disabled, pipe B
<7> [209.867330] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] hw state readout: disabled, pipe B
<7> [209.867463] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] hw state readout: disabled, pipe C
<7> [209.867595] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] hw state readout: disabled, pipe C
<7> [209.867727] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] hw state readout: disabled, pipe C
<7> [209.867859] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] hw state readout: disabled, pipe C
<7> [209.867992] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] hw state readout: disabled, pipe C
<7> [209.868124] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] hw state readout: disabled, pipe C
<7> [209.868262] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:188:plane 1D] hw state readout: disabled, pipe D
<7> [209.868394] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:plane 2D] hw state readout: disabled, pipe D
<7> [209.868527] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:206:plane 3D] hw state readout: disabled, pipe D
<7> [209.868658] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:215:plane 4D] hw state readout: disabled, pipe D
<7> [209.868790] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:224:plane 5D] hw state readout: disabled, pipe D
<7> [209.868922] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:233:cursor D] hw state readout: disabled, pipe D
<7> [209.869055] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:240:DDI TC1/PHY F] hw state readout: disabled, pipe A
<7> [209.869184] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:242:DP-MST A] hw state readout: disabled, pipe A
<7> [209.869319] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:243:DP-MST B] hw state readout: disabled, pipe B
<7> [209.869448] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:244:DP-MST C] hw state readout: disabled, pipe C
<7> [209.869577] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:245:DP-MST D] hw state readout: disabled, pipe D
<7> [209.869708] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:259:DDI TC2/PHY G] hw state readout: disabled, pipe A
<7> [209.869837] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:261:DP-MST A] hw state readout: disabled, pipe A
<7> [209.869965] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:262:DP-MST B] hw state readout: disabled, pipe B
<7> [209.870094] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:263:DP-MST C] hw state readout: disabled, pipe C
<7> [209.870222] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:264:DP-MST D] hw state readout: disabled, pipe D
<7> [209.870359] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:271:DDI TC3/PHY H] hw state readout: disabled, pipe A
<7> [209.870491] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:275:DDI TC4/PHY I] hw state readout: disabled, pipe A
<7> [209.870620] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:277:DP-MST A] hw state readout: disabled, pipe A
<7> [209.870748] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:278:DP-MST B] hw state readout: disabled, pipe B
<7> [209.870876] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:279:DP-MST C] hw state readout: disabled, pipe C
<7> [209.871005] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:280:DP-MST D] hw state readout: disabled, pipe D
<7> [209.871155] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:241:DP-1] hw state readout: disabled
<7> [209.871302] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:254:HDMI-A-1] hw state readout: disabled
<7> [209.871435] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:260:DP-2] hw state readout: disabled
<7> [209.871568] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:268:HDMI-A-2] hw state readout: disabled
<7> [209.871700] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:272:HDMI-A-3] hw state readout: disabled
<7> [209.871832] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:276:DP-3] hw state readout: disabled
<7> [209.871965] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:284:HDMI-A-4] hw state readout: disabled
<7> [209.872093] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] min_cdclk 0 kHz
<7> [209.872221] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] min_cdclk 0 kHz
<7> [209.872355] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] min_cdclk 0 kHz
<7> [209.872483] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] min_cdclk 0 kHz
<7> [209.872610] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] min_cdclk 0 kHz
<7> [209.872738] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] min_cdclk 0 kHz
<7> [209.872866] xe 0000:03:00.0: [drm:intel_bw_crtc_update [xe]] pipe A data rate 0 num active planes 0
<7> [209.873021] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] min_cdclk 0 kHz
<7> [209.873154] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] min_cdclk 0 kHz
<7> [209.873288] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] min_cdclk 0 kHz
<7> [209.873416] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] min_cdclk 0 kHz
<7> [209.873543] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] min_cdclk 0 kHz
<7> [209.873670] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] min_cdclk 0 kHz
<7> [209.873798] xe 0000:03:00.0: [drm:intel_bw_crtc_update [xe]] pipe B data rate 0 num active planes 0
<7> [209.873951] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] min_cdclk 0 kHz
<7> [209.874083] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] min_cdclk 0 kHz
<7> [209.874211] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] min_cdclk 0 kHz
<7> [209.874344] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] min_cdclk 0 kHz
<7> [209.874472] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] min_cdclk 0 kHz
<7> [209.874598] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] min_cdclk 0 kHz
<7> [209.874725] xe 0000:03:00.0: [drm:intel_bw_crtc_update [xe]] pipe C data rate 0 num active planes 0
<7> [209.874878] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:188:plane 1D] min_cdclk 0 kHz
<7> [209.875008] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:plane 2D] min_cdclk 0 kHz
<7> [209.875136] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:206:plane 3D] min_cdclk 0 kHz
<7> [209.875268] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:215:plane 4D] min_cdclk 0 kHz
<7> [209.875394] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:224:plane 5D] min_cdclk 0 kHz
<7> [209.875521] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:233:cursor D] min_cdclk 0 kHz
<7> [209.875647] xe 0000:03:00.0: [drm:intel_bw_crtc_update [xe]] pipe D data rate 0 num active planes 0
<7> [209.875828] xe 0000:03:00.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: n/a, Transcoder A secondary: no, Transcoder B secondary: no
<7> [209.876053] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: no [setup_hw_state]
<7> [209.876207] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:134:pipe B] enable: no [setup_hw_state]
<7> [209.876363] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:186:pipe C] enable: no [setup_hw_state]
<7> [209.876512] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:238:pipe D] enable: no [setup_hw_state]
<7> [209.876663] xe 0000:03:00.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:82:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [209.876800] xe 0000:03:00.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:134:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [209.876931] xe 0000:03:00.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:186:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [209.877061] xe 0000:03:00.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:238:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [209.918366] xe 0000:03:00.0: [drm:safe_mode_worker_func [xe]] GT0: GuC CT safe-mode canceled
<7> [209.934296] xe 0000:03:00.0: [drm:safe_mode_worker_func [xe]] GT1: GuC CT safe-mode canceled
<6> [209.983302] xe 0000:03:00.0: [drm] ccs2 fused off
<6> [209.983306] xe 0000:03:00.0: [drm] ccs3 fused off
<7> [209.983460] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add rcs0 whitelist to engine
<7> [209.983611] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7> [209.983757] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [209.983893] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [209.984064] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs0 whitelist to engine
<7> [209.984237] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs8 whitelist to engine
<7> [209.984432] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add ccs0 whitelist to engine
<7> [209.984561] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7> [209.984695] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [209.984826] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [209.985019] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add ccs1 whitelist to engine
<7> [209.985147] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7> [209.985286] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [209.985417] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [209.986910] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs
<7> [209.987044] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000
<7> [209.987181] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000
<7> [209.987319] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440
<7> [209.987449] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000
<7> [209.987580] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f
<7> [209.987711] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1
<7> [209.987835] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16
<7> [209.987956] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc
<7> [209.988078] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c
<7> [209.988198] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130
<7> [209.988323] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c
<7> [209.988442] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100
<7> [209.988562] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100
<7> [209.988680] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100
<7> [209.988798] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100
<7> [209.988916] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100
<7> [209.989034] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100
<7> [209.989152] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100
<7> [209.989275] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100
<7> [209.989393] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100
<7> [209.989510] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100
<7> [209.989628] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100
<7> [209.989745] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100
<7> [209.989862] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs
<7> [209.989985] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306
<7> [209.990107] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080
<7> [209.990234] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d0] = 0x1000dafc
<7> [209.990355] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d4] = 0x1000db01
<7> [209.990474] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d8] = 0x0000db1c
<7> [209.990595] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x7044] = 0x04200420
<7> [209.990720] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040
<7> [209.990842] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200
<7> [209.990962] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000
<7> [209.991082] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x10001000
<7> [209.991203] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002
<7> [209.991334] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x04002000
<7> [209.991459] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000
<7> [209.991810] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs
<7> [209.991930] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306
<7> [209.992049] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080
<7> [209.992400] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs
<7> [209.992521] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306
<7> [209.992639] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080
<7> [209.992974] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs
<7> [209.993093] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0308
<7> [209.993211] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080
<7> [209.993336] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d0] = 0x1000dafc
<7> [209.993453] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d4] = 0x1000db01
<7> [209.993570] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d8] = 0x0000db1c
<7> [209.993921] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs1 save-restore MMIOs
<7> [209.994040] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1c0c4] = 0x3f7e0308
<7> [209.994157] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1c0d4] = 0xc080c080
<7> [209.994282] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1c4d0] = 0x1000dafc
<7> [209.994399] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1c4d4] = 0x1000db01
<7> [209.994516] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1c4d8] = 0x0000db1c
<7> [209.998854] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x01a443d7
<7> [209.998934] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000800
<7> [209.998998] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000014
<7> [209.999056] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7> [209.999113] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000036ae
<7> [209.999167] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0xe20b0000
<7> [209.999221] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7> [209.999436] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7> [209.999495] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7> [209.999553] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7> [209.999614] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7> [209.999683] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7> [209.999741] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7> [209.999799] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7> [209.999903] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs
<7> [210.000070] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells
<7> [210.002075] xe 0000:03:00.0: [drm:xe_migrate_init [xe]] Migrate min chunk size is 0x00010000
<7> [210.003056] xe 0000:03:00.0: [drm:xe_guc_capture_steered_list_init [xe]] GT0: capture found 120 ext-regs.
<7> [210.020387] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] GT0: ADS capture alloc size changed from 45056 to 20480
<7> [210.021451] xe 0000:03:00.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1800MHz (req 1800MHz), status = 0x00000072 [0x39/00]
<7> [210.026237] xe 0000:03:00.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1800MHz (req 1800MHz), status = 0x80000534 [0x1A/05]
<7> [210.028890] xe 0000:03:00.0: [drm:__xe_guc_upload [xe]] GT0: init took 7ms, freq = 1800MHz (req = 1800MHz), before = 1800MHz, status = 0x8002F034, timeouts = 0
<7> [210.029165] xe 0000:03:00.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7> [210.029904] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA rcs0 save-restore batch
<7> [210.029981] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x5588] = 0x04000400
<7> [210.030050] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6204] = 0x01400140
<7> [210.030115] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6208] = 0x00200020
<7> [210.030183] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6210] = 0x3ff18000
<7> [210.030256] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x62a8] = 0x02400240
<7> [210.030327] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7010] = 0x40004000
<7> [210.030410] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x83a8] = 0x20002000
<7> [210.030476] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x14800] = 0x00020002
<7> [210.033759] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA bcs0 save-restore batch
<7> [210.033845] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x22204] = 0x00000606
<7> [210.033921] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.01
<7> [210.036220] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.01
<7> [210.039764] xe 0000:03:00.0: [drm:xe_gt_apply_ccs_mode [xe]] GT0: CCS_MODE=fff0fc0 config:00400000, num_engines:1, num_slices:2
<6> [210.040768] xe 0000:03:00.0: [drm] vcs1 fused off
<6> [210.040769] xe 0000:03:00.0: [drm] vcs3 fused off
<6> [210.040771] xe 0000:03:00.0: [drm] vcs4 fused off
<6> [210.040772] xe 0000:03:00.0: [drm] vcs5 fused off
<6> [210.040773] xe 0000:03:00.0: [drm] vcs6 fused off
<6> [210.040775] xe 0000:03:00.0: [drm] vcs7 fused off
<6> [210.040777] xe 0000:03:00.0: [drm] vecs2 fused off
<6> [210.040779] xe 0000:03:00.0: [drm] vecs3 fused off
<7> [210.040783] xe 0000:03:00.0: [drm:xe_hw_engines_init_early [xe]] GSC FW not used, disabling gsccs
<7> [210.040929] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vcs0 whitelist to engine
<7> [210.041038] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vcs2 whitelist to engine
<7> [210.041141] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vecs0 whitelist to engine
<7> [210.041263] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vecs1 whitelist to engine
<7> [210.042564] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs
<7> [210.042641] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000
<7> [210.042716] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xa210] = 0x00000002
<7> [210.042788] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1
<7> [210.042861] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16
<7> [210.042929] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc
<7> [210.042996] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c
<7> [210.043062] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130
<7> [210.043130] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c
<7> [210.043193] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100
<7> [210.043268] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100
<7> [210.043330] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100
<7> [210.043390] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100
<7> [210.043448] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100
<7> [210.043507] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100
<7> [210.043565] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100
<7> [210.043622] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100
<7> [210.043679] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100
<7> [210.043736] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100
<7> [210.043793] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100
<7> [210.043849] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100
<7> [210.043906] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs
<7> [210.043979] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000
<7> [210.044243] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs2 save-restore MMIOs
<7> [210.044327] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1d00d4] = 0xc000c000
<7> [210.044810] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs
<7> [210.044892] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000
<7> [210.045075] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs1 save-restore MMIOs
<7> [210.045146] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1d80d4] = 0xc000c000
<7> [210.048266] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x0059b3d7
<7> [210.048350] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7> [210.048423] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000014
<7> [210.048489] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7> [210.048552] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x000047b6
<7> [210.048612] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0xe20b0000
<7> [210.048673] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7> [210.048732] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7> [210.048791] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7> [210.048849] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7> [210.048907] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7> [210.048965] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7> [210.049022] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7> [210.049080] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<7> [210.049157] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] GT1: using 65535 GuC IDs
<7> [210.049249] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] GT1: using 256 doorbells
<7> [210.066538] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] GT1: ADS capture alloc size changed from 45056 to 20480
<7> [210.067576] xe 0000:03:00.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 1500MHz (req 1500MHz), status = 0x00000072 [0x39/00]
<7> [210.077368] xe 0000:03:00.0: [drm:__xe_guc_upload [xe]] GT1: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034, timeouts = 0
<7> [210.077643] xe 0000:03:00.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7> [210.078014] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.01
<7> [210.079501] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.01
<7> [210.121256] xe 0000:03:00.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GuC
<7> [210.125176] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? no->no
<7> [210.125847] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [210.126418] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [210.126515] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [210.126945] xe 0000:03:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff30f2 0x28d32a71)
<7> [210.127334] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [210.127539] xe 0000:03:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1e03010 0x28d00071)
<7> [210.132908] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:241:DP-1] adding connector to sysfs
<7> [210.134865] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY F bus for card0-DP-1
<7> [210.137746] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:241:DP-1] generating connector hotplug event
<7> [210.137902] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:254:HDMI-A-1] adding connector to sysfs
<7> [210.139182] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:254:HDMI-A-1] generating connector hotplug event
<7> [210.139303] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:260:DP-2] adding connector to sysfs
<7> [210.140479] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY G bus for card0-DP-2
<7> [210.142020] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:260:DP-2] generating connector hotplug event
<7> [210.142106] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:268:HDMI-A-2] adding connector to sysfs
<7> [210.142653] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:268:HDMI-A-2] generating connector hotplug event
<7> [210.142713] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:272:HDMI-A-3] adding connector to sysfs
<7> [210.143129] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:272:HDMI-A-3] generating connector hotplug event
<7> [210.143181] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:276:DP-3] adding connector to sysfs
<7> [210.143757] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC4/DDI TC4/PHY I bus for card0-DP-3
<7> [210.144631] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:276:DP-3] generating connector hotplug event
<7> [210.144690] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:284:HDMI-A-4] adding connector to sysfs
<7> [210.145036] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:284:HDMI-A-4] generating connector hotplug event
<6> [210.145073] [drm] Initialized xe 1.1.0 for 0000:03:00.0 on minor 0
<7> [210.145082] xe 0000:03:00.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7> [210.145255] xe 0000:03:00.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1632
<7> [210.146598] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:82:pipe A] not active, skipping
<7> [210.146714] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:134:pipe B] not active, skipping
<7> [210.146813] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:186:pipe C] not active, skipping
<7> [210.146901] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:238:pipe D] not active, skipping
<7> [210.146984] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7> [210.147153] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [210.147398] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:241:DP-1]
<7> [210.152299] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:241:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [210.152427] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:254:HDMI-A-1]
<7> [210.157261] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:254:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [210.157389] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:260:DP-2]
<7> [210.162239] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:260:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [210.162398] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:268:HDMI-A-2]
<7> [210.167237] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:268:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [210.167386] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:272:HDMI-A-3]
<7> [210.172239] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:272:HDMI-A-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [210.172417] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:276:DP-3]
<7> [210.177243] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:276:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [210.177425] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:284:HDMI-A-4]
<7> [210.182243] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:284:HDMI-A-4] status updated from unknown to disconnected (epoch counter 0->1)
<7> [210.182719] xe 0000:03:00.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [210.183280] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:241:DP-1]
<7> [210.183311] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:241:DP-1]
<7> [210.188276] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:241:DP-1] disconnected
<7> [210.188346] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:254:HDMI-A-1]
<7> [210.188366] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:254:HDMI-A-1]
<7> [210.193239] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:254:HDMI-A-1] disconnected
<7> [210.193262] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:260:DP-2]
<7> [210.193281] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:260:DP-2]
<7> [210.198275] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:260:DP-2] disconnected
<7> [210.198296] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:268:HDMI-A-2]
<7> [210.198313] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:268:HDMI-A-2]
<7> [210.203238] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:268:HDMI-A-2] disconnected
<7> [210.203259] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-3]
<7> [210.203277] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:272:HDMI-A-3]
<7> [210.208239] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-3] disconnected
<7> [210.208267] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3]
<7> [210.208287] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:276:DP-3]
<7> [210.213239] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] disconnected
<7> [210.213262] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:284:HDMI-A-4]
<7> [210.213281] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:284:HDMI-A-4]
<7> [210.218237] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:284:HDMI-A-4] disconnected
<7> [210.218259] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [210.218272] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:241:DP-1] enabled? no
<7> [210.218278] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:254:HDMI-A-1] enabled? no
<7> [210.218284] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:260:DP-2] enabled? no
<7> [210.218290] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:268:HDMI-A-2] enabled? no
<7> [210.218296] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:272:HDMI-A-3] enabled? no
<7> [210.218302] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:276:DP-3] enabled? no
<7> [210.218308] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:284:HDMI-A-4] enabled? no
<7> [210.218482] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [210.218506] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [210.218545] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<6> [210.218581] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [210.220524] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 14.01
<7> [210.220719] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [210.220819] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7> [210.221176] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:241:DP-1]
<7> [210.221093] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7> [210.221213] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:241:DP-1]
<7> [210.221358] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7> [210.221593] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7> [210.221788] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7> [210.221965] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7> [210.222137] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7> [210.222307] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7> [210.222453] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7> [210.222594] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7> [210.222736] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7> [210.222873] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7> [210.223006] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7> [210.223138] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7> [210.223284] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7> [210.223413] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7> [210.223535] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7> [210.223648] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7> [210.223762] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7> [210.223875] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7> [210.223988] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7> [210.224135] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7> [210.224343] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [210.224502] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [210.224650] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [210.224796] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7> [210.226237] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:241:DP-1] disconnected
<7> [210.226254] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:254:HDMI-A-1]
<7> [210.226266] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:254:HDMI-A-1]
<7> [210.226864] xe 0000:03:00.0: [drm:xe_hwmon_register [xe]] Register xe hwmon interface
<7> [210.229389] xe 0000:03:00.0: [drm:xe_pm_init [xe]] d3cold: ACPI _PR3 not present
<7> [210.229484] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7> [210.231483] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:254:HDMI-A-1] disconnected
<7> [210.231505] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:260:DP-2]
<7> [210.231521] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:260:DP-2]
<7> [210.236254] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:260:DP-2] disconnected
<7> [210.236324] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:268:HDMI-A-2]
<7> [210.236375] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:268:HDMI-A-2]
<7> [210.239071] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [210.239529] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [210.239906] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [210.241254] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:268:HDMI-A-2] disconnected
<7> [210.241301] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-3]
<7> [210.241335] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:272:HDMI-A-3]
<7> [210.246255] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-3] disconnected
<7> [210.246310] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3]
<7> [210.246351] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:276:DP-3]
<7> [210.251256] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] disconnected
<7> [210.251294] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:284:HDMI-A-4]
<7> [210.251321] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:284:HDMI-A-4]
<7> [210.256235] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:284:HDMI-A-4] disconnected
<7> [210.256256] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [210.256266] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:241:DP-1] enabled? no
<7> [210.256271] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:254:HDMI-A-1] enabled? no
<7> [210.256275] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:260:DP-2] enabled? no
<7> [210.256279] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:268:HDMI-A-2] enabled? no
<7> [210.256284] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:272:HDMI-A-3] enabled? no
<7> [210.256288] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:276:DP-3] enabled? no
<7> [210.256292] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:284:HDMI-A-4] enabled? no
<7> [210.256409] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [210.256428] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [210.256459] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<6> [210.256481] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [210.256484] xe 0000:03:00.0: [drm:drm_client_dev_hotplug] intel-fbdev: ret=0
<7> [210.256496] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on
<6> [210.268438] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
<6> [210.270388] snd_hda_intel 0000:04:00.0: enabling device (0000 -> 0002)
<6> [210.271124] snd_hda_intel 0000:04:00.0: bound 0000:03:00.0 (ops intel_audio_component_bind_ops [xe])
<7> [210.271309] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [210.271406] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [210.271628] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [210.271740] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [210.271833] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<3> [210.276072] snd_hda_intel 0000:04:00.0: Unknown capability 0
<7> [210.280594] xe 0000:03:00.0: [drm:drm_client_dev_restore] intel-fbdev: ret=-12
<6> [210.280681] [IGT] xe_module_load: finished subtest load, SUCCESS
<6> [210.280773] [IGT] xe_module_load: exiting, ret=0
Created at 2025-02-27 00:07:22