Results for igt@xe_module_load@load

Machine description: bat-bmg-2

Result: Pass

igt_runner0 results0.json i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.69 seconds
Igt-Version 
IGT-Version: 1.30-gf058a041a (x86_64) (Linux: 6.14.0-rc3-xe+ x86_64)
Out 
Using IGT_SRANDOM=1740004641 for randomisation
Starting subtest: load
Opened device: /dev/dri/card0
Subtest load: SUCCESS (0.687s)
Err 
Starting subtest: load
Subtest load: SUCCESS (0.687s)
Dmesg
<6> [207.717856] [IGT] xe_module_load: executing
<6> [207.722139] [IGT] xe_module_load: starting subtest load
<6> [207.945750] xe 0000:03:00.0: vgaarb: deactivate vga console
<6> [207.947571] xe 0000:03:00.0: [drm] Found battlemage (device ID e20b) discrete display version 14.01 stepping B0
<7> [207.947580] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE e20b:0000 dgfx:1 gfx:Xe2_LPG / Xe2_HPG / Xe3_LPG (20.01) media:Xe2_LPM / Xe2_HPM / Xe3_LPM (13.01) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:1
<7> [207.947680] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] Stepping = (G:A0, M:A1, B:**)
<7> [207.947771] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)
<6> [207.955455] xe 0000:03:00.0: [drm] Using GuC firmware from xe/bmg_guc_70.bin version 70.36.0
<7> [207.958779] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x004693d7
<7> [207.958867] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7> [207.958939] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000
<7> [207.959007] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7> [207.959071] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x00000af8
<7> [207.959138] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0xe20b0000
<7> [207.959202] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7> [207.959263] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7> [207.959323] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7> [207.959382] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7> [207.959440] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7> [207.959499] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7> [207.959556] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7> [207.959612] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7> [207.959668] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [207.959775] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7> [207.961208] xe 0000:03:00.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1800MHz (req 1800MHz), status = 0x00000072 [0x39/00]
<7> [207.970711] xe 0000:03:00.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 1800MHz (req = 1800MHz), before = 1800MHz, status = 0x8002F034, timeouts = 0
<7> [207.971580] xe 0000:03:00.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7> [207.971656] xe 0000:03:00.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT safe-mode enabled
<7> [207.971761] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,000fffff
<7> [207.971832] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,000fffff
<7> [207.971896] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 000000ff
<7> [207.971957] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7> [207.972016] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,00ffffff
<6> [207.972916] xe 0000:03:00.0: [drm] Using GuC firmware from xe/bmg_guc_70.bin version 70.36.0
<7> [207.974511] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00e8c3d7
<7> [207.974578] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7> [207.974637] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000000
<7> [207.974697] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7> [207.974777] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001f3e
<7> [207.974838] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0xe20b0000
<7> [207.974898] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7> [207.974957] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7> [207.975015] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7> [207.975073] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7> [207.975130] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7> [207.975186] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7> [207.975242] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7> [207.975301] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<6> [207.976673] xe 0000:03:00.0: [drm] Using HuC firmware from xe/bmg_huc.bin version 8.2.10
<7> [207.976932] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [207.977034] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7> [207.978397] xe 0000:03:00.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 1500MHz (req 1500MHz), status = 0x00000072 [0x39/00]
<7> [207.987711] xe 0000:03:00.0: [drm:__xe_guc_upload [xe]] GT1: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034, timeouts = 0
<7> [207.988026] xe 0000:03:00.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7> [207.988097] xe 0000:03:00.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT safe-mode enabled
<7> [207.988175] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,0000ff00
<7> [207.988242] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,0000ff00
<7> [207.988304] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 000000ff
<7> [207.988363] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7> [207.988424] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,00000000
<6> [207.988641] xe 0000:03:00.0: [drm] VISIBLE VRAM: 0x0000004000000000, 0x0000000400000000
<6> [207.988998] xe 0000:03:00.0: [drm] VRAM[0, 0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [207.989001] xe 0000:03:00.0: [drm] VRAM[0, 0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<6> [207.989003] xe 0000:03:00.0: [drm] Total VRAM: 0x0000004000000000, 0x0000000300000000
<6> [207.989004] xe 0000:03:00.0: [drm] Available VRAM: 0x0000004000000000, 0x00000002fb800000
<7> [207.989111] xe 0000:03:00.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 33554432 bytes
<7> [207.989281] xe 0000:03:00.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7> [207.989431] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x0
<7> [207.989536] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion not supported!
<7> [207.989631] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num qgv points 2
<7> [207.989749] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM channels: 6
<7> [207.989847] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Watermark level 0 adjustment needed: yes
<7> [207.989939] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [207.990038] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=19000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [207.990126] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.constprop.0.isra.0 [xe]] QGV 0: deratedbw=33600 peakbw: 48000
<7> [207.990208] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.constprop.0.isra.0 [xe]] QGV 1: deratedbw=53000 peakbw: 456000
<7> [207.990293] xe 0000:03:00.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7> [207.990751] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7> [208.004232] xe 0000:03:00.0: [drm:oprom_get_vbt [xe]] Found valid VBT in SPI flash
<7> [208.004314] xe 0000:03:00.0: [drm:intel_bios_init [xe]] VBT signature "$VBT BATTLEMAGE ", BDB version 257
<7> [208.004392] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7> [208.004467] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7> [208.004548] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7> [208.004624] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7> [208.004704] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 814, min size 848)
<7> [208.004782] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7> [208.004856] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7> [208.004985] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7> [208.005094] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7> [208.005179] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7> [208.005257] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7> [208.005335] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7> [208.005417] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7> [208.005492] xe 0000:03:00.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<7> [208.005566] xe 0000:03:00.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7> [208.005639] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Expected child device config size for VBT version 257 not known; assuming 40
<7> [208.005719] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [208.005793] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [208.005866] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2
<7> [208.005940] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [208.006023] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7> [208.006101] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [208.006178] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT DP max link rate: 1350000
<7> [208.006252] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [208.006332] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT DP max link rate: 1000000
<7> [208.006410] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [208.006487] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [208.006562] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT DP max link rate: 1000000
<7> [208.006642] xe 0000:03:00.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 4000000a
<7> [208.006760] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [208.006892] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7> [208.007012] xe 0000:03:00.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [208.007162] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [208.007319] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [208.007403] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [208.007493] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [208.007640] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<6> [208.007759] xe 0000:03:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=none
<7> [208.007789] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [208.007894] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [208.007991] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [208.008080] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [208.008448] xe 0000:03:00.0: [drm:intel_dmc_init [xe]] Loading i915/bmg_dmc.bin
<7> [208.009075] xe 0000:03:00.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7> [208.009189] xe 0000:03:00.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 200 us
<7> [208.009292] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM0 latency 11 (11.0 usec)
<7> [208.009383] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM1 latency 40 (40.0 usec)
<7> [208.009465] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM2 latency 100 (100.0 usec)
<7> [208.009542] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM3 latency 150 (150.0 usec)
<7> [208.009615] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM4 latency 250 (250.0 usec)
<7> [208.009689] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM5 latency 250 (250.0 usec)
<7> [208.009779] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM6 latency not provided
<7> [208.009854] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM7 latency not provided
<7> [208.011127] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7> [208.011244] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7> [208.011347] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7> [208.011436] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x1240108 (EVT_HTP)
<7> [208.011519] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL)
<7> [208.011599] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f008 = 0x40303fe4 (EVT_HTP)
<7> [208.011689] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7> [208.011803] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x96fc0
<7> [208.011888] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling)
<7> [208.011969] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f004 = 0x22e422ac (EVT_HTP)
<7> [208.012069] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling)
<7> [208.012155] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f008 = 0x23d823a0 (EVT_HTP)
<7> [208.012237] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [208.012315] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f00c = 0x25ac2494 (EVT_HTP)
<7> [208.012398] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7> [208.012484] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9efc0
<7> [208.012566] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling)
<7> [208.012647] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f404 = 0xa7dca7a4 (EVT_HTP)
<7> [208.012751] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling)
<7> [208.012835] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f408 = 0xa8d0a898 (EVT_HTP)
<7> [208.012915] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [208.013002] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f40c = 0xaaa4a98c (EVT_HTP)
<7> [208.013089] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7> [208.013170] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x53fc0
<7> [208.013250] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [208.013334] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x25202408 (EVT_HTP)
<7> [208.013422] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 4:
<7> [208.013510] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5afc0
<7> [208.013595] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [208.013686] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x95209408 (EVT_HTP)
<7> [208.015848] xe 0000:03:00.0: [drm:intel_display_driver_probe_nogem [xe]] 4 display pipes available.
<7> [208.020957] xe 0000:03:00.0: [drm:intel_cdclk_dump_config [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [208.021092] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7> [208.021186] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7> [208.022253] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:240:DDI TC1/PHY F] Using AUX CH USBC1 (VBT)
<7> [208.022865] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:240:DDI TC1/PHY F]
<7> [208.023322] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:240:DDI TC1/PHY F]
<7> [208.023455] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:240:DDI TC1/PHY F] Using DDC pin 0x9 (VBT)
<6> [208.023531] xe 0000:03:00.0: [drm] Finished loading DMC firmware i915/bmg_dmc.bin (v2.6)
<7> [208.023801] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:259:DDI TC2/PHY G] Using AUX CH USBC2 (VBT)
<7> [208.023912] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:259:DDI TC2/PHY G]
<7> [208.024261] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:259:DDI TC2/PHY G]
<7> [208.024357] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:259:DDI TC2/PHY G] Using DDC pin 0xa (VBT)
<7> [208.024532] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:271:DDI TC3/PHY H]
<7> [208.024620] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:271:DDI TC3/PHY H] Using DDC pin 0xb (VBT)
<7> [208.024844] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:275:DDI TC4/PHY I] Using AUX CH USBC4 (VBT)
<7> [208.024980] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:275:DDI TC4/PHY I]
<7> [208.025245] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:275:DDI TC4/PHY I]
<7> [208.025337] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:275:DDI TC4/PHY I] Using DDC pin 0xc (VBT)
<7> [208.025715] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:82:pipe A] hw state readout: disabled
<7> [208.025845] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:134:pipe B] hw state readout: disabled
<7> [208.025971] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:186:pipe C] hw state readout: disabled
<7> [208.026103] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:238:pipe D] hw state readout: disabled
<7> [208.026225] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] hw state readout: disabled, pipe A
<7> [208.026312] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] hw state readout: disabled, pipe A
<7> [208.026396] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] hw state readout: disabled, pipe A
<7> [208.026478] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] hw state readout: disabled, pipe A
<7> [208.026556] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] hw state readout: disabled, pipe A
<7> [208.026631] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] hw state readout: disabled, pipe A
<7> [208.026731] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] hw state readout: disabled, pipe B
<7> [208.026835] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] hw state readout: disabled, pipe B
<7> [208.026923] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] hw state readout: disabled, pipe B
<7> [208.027004] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] hw state readout: disabled, pipe B
<7> [208.027082] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] hw state readout: disabled, pipe B
<7> [208.027157] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] hw state readout: disabled, pipe B
<7> [208.027232] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] hw state readout: disabled, pipe C
<7> [208.027307] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] hw state readout: disabled, pipe C
<7> [208.027381] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] hw state readout: disabled, pipe C
<7> [208.027459] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] hw state readout: disabled, pipe C
<7> [208.027538] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] hw state readout: disabled, pipe C
<7> [208.027618] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] hw state readout: disabled, pipe C
<7> [208.027694] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:188:plane 1D] hw state readout: disabled, pipe D
<7> [208.027783] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:plane 2D] hw state readout: disabled, pipe D
<7> [208.027866] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:206:plane 3D] hw state readout: disabled, pipe D
<7> [208.027947] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:215:plane 4D] hw state readout: disabled, pipe D
<7> [208.028025] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:224:plane 5D] hw state readout: disabled, pipe D
<7> [208.028105] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:233:cursor D] hw state readout: disabled, pipe D
<7> [208.028185] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:240:DDI TC1/PHY F] hw state readout: disabled, pipe A
<7> [208.028265] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:242:DP-MST A] hw state readout: disabled, pipe A
<7> [208.028340] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:243:DP-MST B] hw state readout: disabled, pipe B
<7> [208.028415] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:244:DP-MST C] hw state readout: disabled, pipe C
<7> [208.028491] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:245:DP-MST D] hw state readout: disabled, pipe D
<7> [208.028569] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:259:DDI TC2/PHY G] hw state readout: disabled, pipe A
<7> [208.028647] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:261:DP-MST A] hw state readout: disabled, pipe A
<7> [208.028734] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:262:DP-MST B] hw state readout: disabled, pipe B
<7> [208.028813] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:263:DP-MST C] hw state readout: disabled, pipe C
<7> [208.028892] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:264:DP-MST D] hw state readout: disabled, pipe D
<7> [208.028973] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:271:DDI TC3/PHY H] hw state readout: disabled, pipe A
<7> [208.029051] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:275:DDI TC4/PHY I] hw state readout: disabled, pipe A
<7> [208.029124] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:277:DP-MST A] hw state readout: disabled, pipe A
<7> [208.029196] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:278:DP-MST B] hw state readout: disabled, pipe B
<7> [208.029273] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:279:DP-MST C] hw state readout: disabled, pipe C
<7> [208.029348] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:280:DP-MST D] hw state readout: disabled, pipe D
<7> [208.029442] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:241:DP-1] hw state readout: disabled
<7> [208.029528] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:254:HDMI-A-1] hw state readout: disabled
<7> [208.029609] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:260:DP-2] hw state readout: disabled
<7> [208.029687] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:268:HDMI-A-2] hw state readout: disabled
<7> [208.029776] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:272:HDMI-A-3] hw state readout: disabled
<7> [208.029857] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:276:DP-3] hw state readout: disabled
<7> [208.029940] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:284:HDMI-A-4] hw state readout: disabled
<7> [208.030018] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] min_cdclk 0 kHz
<7> [208.030095] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] min_cdclk 0 kHz
<7> [208.030168] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] min_cdclk 0 kHz
<7> [208.030241] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] min_cdclk 0 kHz
<7> [208.030312] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] min_cdclk 0 kHz
<7> [208.030382] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] min_cdclk 0 kHz
<7> [208.030463] xe 0000:03:00.0: [drm:intel_bw_crtc_update [xe]] pipe A data rate 0 num active planes 0
<7> [208.030565] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] min_cdclk 0 kHz
<7> [208.030651] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] min_cdclk 0 kHz
<7> [208.030740] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] min_cdclk 0 kHz
<7> [208.030817] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] min_cdclk 0 kHz
<7> [208.030892] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] min_cdclk 0 kHz
<7> [208.030965] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] min_cdclk 0 kHz
<7> [208.031039] xe 0000:03:00.0: [drm:intel_bw_crtc_update [xe]] pipe B data rate 0 num active planes 0
<7> [208.031140] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] min_cdclk 0 kHz
<7> [208.031234] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] min_cdclk 0 kHz
<7> [208.031319] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] min_cdclk 0 kHz
<7> [208.031399] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] min_cdclk 0 kHz
<7> [208.031477] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] min_cdclk 0 kHz
<7> [208.031560] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] min_cdclk 0 kHz
<7> [208.031639] xe 0000:03:00.0: [drm:intel_bw_crtc_update [xe]] pipe C data rate 0 num active planes 0
<7> [208.031745] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:188:plane 1D] min_cdclk 0 kHz
<7> [208.031825] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:plane 2D] min_cdclk 0 kHz
<7> [208.031904] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:206:plane 3D] min_cdclk 0 kHz
<7> [208.031979] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:215:plane 4D] min_cdclk 0 kHz
<7> [208.032054] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:224:plane 5D] min_cdclk 0 kHz
<7> [208.032132] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:233:cursor D] min_cdclk 0 kHz
<7> [208.032210] xe 0000:03:00.0: [drm:intel_bw_crtc_update [xe]] pipe D data rate 0 num active planes 0
<7> [208.032329] xe 0000:03:00.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: n/a, Transcoder A secondary: no, Transcoder B secondary: no
<7> [208.032477] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: no [setup_hw_state]
<7> [208.032573] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:134:pipe B] enable: no [setup_hw_state]
<7> [208.032659] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:186:pipe C] enable: no [setup_hw_state]
<7> [208.032752] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:238:pipe D] enable: no [setup_hw_state]
<7> [208.032839] xe 0000:03:00.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:82:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [208.032939] xe 0000:03:00.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:134:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [208.033027] xe 0000:03:00.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:186:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [208.033108] xe 0000:03:00.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:238:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [208.071932] xe 0000:03:00.0: [drm:safe_mode_worker_func [xe]] GT0: GuC CT safe-mode canceled
<7> [208.096796] xe 0000:03:00.0: [drm:safe_mode_worker_func [xe]] GT1: GuC CT safe-mode canceled
<6> [208.128964] xe 0000:03:00.0: [drm] ccs2 fused off
<6> [208.128968] xe 0000:03:00.0: [drm] ccs3 fused off
<7> [208.129067] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add rcs0 whitelist to engine
<7> [208.129162] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7> [208.129248] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [208.129324] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [208.129418] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs0 whitelist to engine
<7> [208.129509] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs8 whitelist to engine
<7> [208.129613] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add ccs0 whitelist to engine
<7> [208.129686] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7> [208.129776] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [208.129845] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [208.129956] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add ccs1 whitelist to engine
<7> [208.130023] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7> [208.130090] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [208.130155] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [208.131408] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs
<7> [208.131491] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000
<7> [208.131571] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000
<7> [208.131645] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440
<7> [208.131723] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000
<7> [208.131794] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f
<7> [208.131866] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1
<7> [208.131938] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16
<7> [208.132007] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc
<7> [208.132078] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c
<7> [208.132147] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130
<7> [208.132210] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c
<7> [208.132274] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100
<7> [208.132336] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100
<7> [208.132396] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100
<7> [208.132458] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100
<7> [208.132524] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100
<7> [208.132589] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100
<7> [208.132653] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100
<7> [208.132723] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100
<7> [208.132785] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100
<7> [208.132846] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100
<7> [208.132906] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100
<7> [208.132965] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100
<7> [208.133025] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs
<7> [208.133102] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306
<7> [208.133174] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080
<7> [208.133243] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d0] = 0x1000dafc
<7> [208.133307] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d4] = 0x1000db01
<7> [208.133370] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d8] = 0x0000db1c
<7> [208.133434] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x7044] = 0x04200420
<7> [208.133507] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040
<7> [208.133576] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200
<7> [208.133641] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000
<7> [208.133711] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x10001000
<7> [208.133776] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002
<7> [208.133844] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x04002000
<7> [208.133912] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000
<7> [208.134193] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs
<7> [208.134268] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306
<7> [208.134330] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080
<7> [208.134602] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs
<7> [208.134672] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306
<7> [208.134748] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080
<7> [208.135013] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs
<7> [208.135078] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0308
<7> [208.135139] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080
<7> [208.135201] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d0] = 0x1000dafc
<7> [208.135261] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d4] = 0x1000db01
<7> [208.135321] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d8] = 0x0000db1c
<7> [208.135600] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs1 save-restore MMIOs
<7> [208.135668] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1c0c4] = 0x3f7e0308
<7> [208.135742] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1c0d4] = 0xc080c080
<7> [208.135807] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1c4d0] = 0x1000dafc
<7> [208.135873] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1c4d4] = 0x1000db01
<7> [208.135936] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1c4d8] = 0x0000db1c
<7> [208.140973] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x01a443d7
<7> [208.141066] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000800
<7> [208.141140] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000014
<7> [208.141207] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7> [208.141273] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000036ae
<7> [208.141339] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0xe20b0000
<7> [208.141404] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7> [208.141465] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7> [208.141526] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7> [208.141585] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7> [208.141645] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7> [208.141712] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7> [208.141770] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7> [208.141826] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7> [208.141907] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs
<7> [208.142136] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells
<7> [208.143451] xe 0000:03:00.0: [drm:xe_migrate_init [xe]] Migrate min chunk size is 0x00010000
<7> [208.144446] xe 0000:03:00.0: [drm:xe_guc_capture_steered_list_init [xe]] GT0: capture found 120 ext-regs.
<7> [208.162498] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] GT0: ADS capture alloc size changed from 45056 to 20480
<7> [208.163579] xe 0000:03:00.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1800MHz (req 1800MHz), status = 0x00000072 [0x39/00]
<7> [208.172266] xe 0000:03:00.0: [drm:__xe_guc_upload [xe]] GT0: init took 8ms, freq = 1800MHz (req = 1800MHz), before = 1800MHz, status = 0x8002F034, timeouts = 0
<7> [208.172560] xe 0000:03:00.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7> [208.173302] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA rcs0 save-restore batch
<7> [208.173380] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x5588] = 0x04000400
<7> [208.173445] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6204] = 0x01400140
<7> [208.173505] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6208] = 0x00200020
<7> [208.173567] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6210] = 0x3ff18000
<7> [208.173625] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x62a8] = 0x02400240
<7> [208.173683] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7010] = 0x40004000
<7> [208.173761] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x83a8] = 0x20002000
<7> [208.173822] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x14800] = 0x00020002
<7> [208.176855] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA bcs0 save-restore batch
<7> [208.176926] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x22204] = 0x00000606
<7> [208.176995] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.01
<7> [208.180057] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.01
<7> [208.183897] xe 0000:03:00.0: [drm:xe_gt_apply_ccs_mode [xe]] GT0: CCS_MODE=fff0fc0 config:00400000, num_engines:1, num_slices:2
<6> [208.184973] xe 0000:03:00.0: [drm] vcs1 fused off
<6> [208.184977] xe 0000:03:00.0: [drm] vcs3 fused off
<6> [208.184978] xe 0000:03:00.0: [drm] vcs4 fused off
<6> [208.184979] xe 0000:03:00.0: [drm] vcs5 fused off
<6> [208.184980] xe 0000:03:00.0: [drm] vcs6 fused off
<6> [208.184981] xe 0000:03:00.0: [drm] vcs7 fused off
<6> [208.184983] xe 0000:03:00.0: [drm] vecs2 fused off
<6> [208.184984] xe 0000:03:00.0: [drm] vecs3 fused off
<7> [208.184987] xe 0000:03:00.0: [drm:xe_hw_engines_init_early [xe]] GSC FW not used, disabling gsccs
<7> [208.185115] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vcs0 whitelist to engine
<7> [208.185231] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vcs2 whitelist to engine
<7> [208.185330] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vecs0 whitelist to engine
<7> [208.185423] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vecs1 whitelist to engine
<7> [208.186724] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs
<7> [208.186800] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000
<7> [208.186874] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xa210] = 0x00000002
<7> [208.186952] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1
<7> [208.187028] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16
<7> [208.187097] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc
<7> [208.187163] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c
<7> [208.187226] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130
<7> [208.187290] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c
<7> [208.187354] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100
<7> [208.187417] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100
<7> [208.187479] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100
<7> [208.187540] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100
<7> [208.187603] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100
<7> [208.187665] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100
<7> [208.187737] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100
<7> [208.187798] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100
<7> [208.187858] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100
<7> [208.187916] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100
<7> [208.187976] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100
<7> [208.188038] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100
<7> [208.188101] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs
<7> [208.188177] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000
<7> [208.188453] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs2 save-restore MMIOs
<7> [208.188533] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1d00d4] = 0xc000c000
<7> [208.189001] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs
<7> [208.189082] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000
<7> [208.189272] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs1 save-restore MMIOs
<7> [208.189342] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1d80d4] = 0xc000c000
<7> [208.192389] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x005983d7
<7> [208.192472] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7> [208.192546] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000014
<7> [208.192613] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7> [208.192680] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x000047b6
<7> [208.192763] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0xe20b0000
<7> [208.192828] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7> [208.192889] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7> [208.192953] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7> [208.193017] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7> [208.193079] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7> [208.193138] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7> [208.193197] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7> [208.193257] xe 0000:03:00.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<7> [208.193335] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] GT1: using 65535 GuC IDs
<7> [208.193420] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] GT1: using 256 doorbells
<7> [208.210427] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] GT1: ADS capture alloc size changed from 45056 to 20480
<7> [208.211409] xe 0000:03:00.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 1500MHz (req 1500MHz), status = 0x00000072 [0x39/00]
<7> [208.220702] xe 0000:03:00.0: [drm:__xe_guc_upload [xe]] GT1: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034, timeouts = 0
<7> [208.220978] xe 0000:03:00.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7> [208.221370] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.01
<7> [208.222625] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.01
<7> [208.265298] xe 0000:03:00.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GuC
<7> [208.269009] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? no->no
<7> [208.269656] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [208.270254] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [208.270727] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [208.271930] xe 0000:03:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff30f2 0x28d32a71)
<7> [208.272233] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [208.272440] xe 0000:03:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1e03010 0x28d00071)
<7> [208.274411] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:241:DP-1] adding connector to sysfs
<7> [208.275052] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY F bus for card0-DP-1
<7> [208.276256] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:241:DP-1] generating connector hotplug event
<7> [208.276321] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:254:HDMI-A-1] adding connector to sysfs
<7> [208.276601] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:254:HDMI-A-1] generating connector hotplug event
<7> [208.276646] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:260:DP-2] adding connector to sysfs
<7> [208.277080] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY G bus for card0-DP-2
<7> [208.277782] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:260:DP-2] generating connector hotplug event
<7> [208.277823] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:268:HDMI-A-2] adding connector to sysfs
<7> [208.278054] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:268:HDMI-A-2] generating connector hotplug event
<7> [208.278087] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:272:HDMI-A-3] adding connector to sysfs
<7> [208.278332] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:272:HDMI-A-3] generating connector hotplug event
<7> [208.278362] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:276:DP-3] adding connector to sysfs
<7> [208.278666] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC4/DDI TC4/PHY I bus for card0-DP-3
<7> [208.279147] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:276:DP-3] generating connector hotplug event
<7> [208.279181] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:284:HDMI-A-4] adding connector to sysfs
<7> [208.279417] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:284:HDMI-A-4] generating connector hotplug event
<6> [208.279441] [drm] Initialized xe 1.1.0 for 0000:03:00.0 on minor 0
<7> [208.279449] xe 0000:03:00.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7> [208.279554] xe 0000:03:00.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1632
<7> [208.280594] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:82:pipe A] not active, skipping
<7> [208.280713] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:134:pipe B] not active, skipping
<7> [208.280801] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:186:pipe C] not active, skipping
<7> [208.280885] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:238:pipe D] not active, skipping
<7> [208.280966] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7> [208.281119] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:241:DP-1]
<7> [208.281565] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [208.285728] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:241:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [208.285856] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:254:HDMI-A-1]
<7> [208.290820] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:254:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [208.290952] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:260:DP-2]
<7> [208.295704] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:260:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [208.295879] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:268:HDMI-A-2]
<7> [208.300701] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:268:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [208.300838] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:272:HDMI-A-3]
<7> [208.305698] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:272:HDMI-A-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [208.305861] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:276:DP-3]
<7> [208.310701] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:276:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [208.310868] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:284:HDMI-A-4]
<7> [208.315701] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:284:HDMI-A-4] status updated from unknown to disconnected (epoch counter 0->1)
<7> [208.315890] xe 0000:03:00.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [208.315970] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:241:DP-1]
<7> [208.316067] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:241:DP-1]
<7> [208.320708] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:241:DP-1] disconnected
<7> [208.320792] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:254:HDMI-A-1]
<7> [208.320815] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:254:HDMI-A-1]
<7> [208.325721] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:254:HDMI-A-1] disconnected
<7> [208.325760] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:260:DP-2]
<7> [208.325791] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:260:DP-2]
<7> [208.330707] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:260:DP-2] disconnected
<7> [208.330746] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:268:HDMI-A-2]
<7> [208.330778] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:268:HDMI-A-2]
<7> [208.335734] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:268:HDMI-A-2] disconnected
<7> [208.335767] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-3]
<7> [208.335796] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:272:HDMI-A-3]
<7> [208.340705] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-3] disconnected
<7> [208.340733] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3]
<7> [208.340757] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:276:DP-3]
<7> [208.345706] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] disconnected
<7> [208.345735] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:284:HDMI-A-4]
<7> [208.345758] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:284:HDMI-A-4]
<7> [208.350704] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:284:HDMI-A-4] disconnected
<7> [208.350729] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [208.350746] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:241:DP-1] enabled? no
<7> [208.350754] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:254:HDMI-A-1] enabled? no
<7> [208.350761] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:260:DP-2] enabled? no
<7> [208.350767] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:268:HDMI-A-2] enabled? no
<7> [208.350774] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:272:HDMI-A-3] enabled? no
<7> [208.350780] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:276:DP-3] enabled? no
<7> [208.350787] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:284:HDMI-A-4] enabled? no
<7> [208.351006] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [208.351037] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [208.351088] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<6> [208.351130] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [208.353294] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [208.353205] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 14.01
<7> [208.353444] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7> [208.353643] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:241:DP-1]
<7> [208.353635] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7> [208.353670] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:241:DP-1]
<7> [208.353834] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7> [208.353998] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7> [208.354154] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7> [208.354316] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7> [208.354481] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7> [208.354632] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7> [208.354785] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7> [208.354926] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7> [208.355066] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7> [208.355212] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7> [208.355354] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7> [208.355494] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7> [208.355631] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7> [208.355769] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7> [208.355900] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7> [208.356029] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7> [208.356152] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7> [208.356278] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7> [208.356400] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7> [208.356525] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7> [208.356712] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [208.356884] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [208.357055] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [208.357218] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7> [208.358695] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:241:DP-1] disconnected
<7> [208.358708] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:254:HDMI-A-1]
<7> [208.358717] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:254:HDMI-A-1]
<7> [208.358942] xe 0000:03:00.0: [drm:xe_hwmon_register [xe]] Register xe hwmon interface
<7> [208.361465] xe 0000:03:00.0: [drm:xe_pm_init [xe]] d3cold: ACPI _PR3 not present
<7> [208.361559] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7> [208.363739] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:254:HDMI-A-1] disconnected
<7> [208.363781] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:260:DP-2]
<7> [208.363814] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:260:DP-2]
<7> [208.368699] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:260:DP-2] disconnected
<7> [208.368721] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:268:HDMI-A-2]
<7> [208.368737] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:268:HDMI-A-2]
<7> [208.370716] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [208.371117] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [208.371350] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [208.373708] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:268:HDMI-A-2] disconnected
<7> [208.373733] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-3]
<7> [208.373750] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:272:HDMI-A-3]
<7> [208.378723] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-3] disconnected
<7> [208.378745] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3]
<7> [208.378761] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:276:DP-3]
<7> [208.383699] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] disconnected
<7> [208.383714] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:284:HDMI-A-4]
<7> [208.383724] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:284:HDMI-A-4]
<7> [208.388735] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:284:HDMI-A-4] disconnected
<7> [208.388754] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [208.388768] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:241:DP-1] enabled? no
<7> [208.388773] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:254:HDMI-A-1] enabled? no
<7> [208.388778] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:260:DP-2] enabled? no
<7> [208.388783] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:268:HDMI-A-2] enabled? no
<7> [208.388787] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:272:HDMI-A-3] enabled? no
<7> [208.388797] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:276:DP-3] enabled? no
<7> [208.388800] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:284:HDMI-A-4] enabled? no
<7> [208.388917] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [208.388933] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [208.388956] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<6> [208.388971] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [208.388973] xe 0000:03:00.0: [drm:drm_client_dev_hotplug] intel-fbdev: ret=0
<7> [208.388982] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on
<6> [208.396918] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
<6> [208.398838] snd_hda_intel 0000:04:00.0: enabling device (0000 -> 0002)
<6> [208.399401] snd_hda_intel 0000:04:00.0: bound 0000:03:00.0 (ops intel_audio_component_bind_ops [xe])
<7> [208.399509] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [208.399612] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [208.399891] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [208.400000] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [208.400099] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<3> [208.404812] snd_hda_intel 0000:04:00.0: Unknown capability 0
<7> [208.409516] xe 0000:03:00.0: [drm:drm_client_dev_restore] intel-fbdev: ret=-12
<6> [208.409574] [IGT] xe_module_load: finished subtest load, SUCCESS
<6> [208.409606] [IGT] xe_module_load: exiting, ret=0
Created at 2025-02-19 22:48:05