Results for igt@xe_pm@s3-d3hot-basic-exec

Machine description: shard-lnl-5

Result: Skip

i915_display_info6 igt_runner6 results6.json results6-xe-load.json i915_display_info_post_exec6 boot6 dmesg6

DetailValue
Duration 0.56 seconds
Hostname
shard-lnl-5
Igt-Version
IGT-Version: 2.0-g49d989682 (x86_64) (Linux: 6.14.0-rc7-xe+ x86_64)
Out
Using IGT_SRANDOM=1742567193 for randomisation
Opened device: /dev/dri/card0
Starting subtest: s3-d3hot-basic-exec
mem_sleep state deep not supported.
Supported mem_sleep states: [s2idle]
Test requirement not met in function igt_system_suspend_autoresume, file ../lib/igt_aux.c:1022:
Test requirement: !(!is_mem_sleep_state_supported(power_dir, MEM_SLEEP_DEEP))
S3 not supported in this system.
Subtest s3-d3hot-basic-exec: SKIP (0.560s)
Err
Starting subtest: s3-d3hot-basic-exec
Subtest s3-d3hot-basic-exec: SKIP (0.560s)
Dmesg
<7> [189.700600] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [189.700721] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [189.700799] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<6> [189.712509] Console: switching to colour dummy device 80x25
<6> [189.712647] [IGT] xe_pm: executing
<7> [190.628567] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7> [190.628575] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7> [190.628625] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<6> [190.751450] [IGT] xe_pm: starting subtest s3-d3hot-basic-exec
<7> [190.751926] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:189:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [190.752373] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:188:DDI A/PHY A][CRTC:82:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7> [190.752854] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7> [190.753263] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [190.753754] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:188:DDI A/PHY A] [CRTC:82:pipe A]
<7> [190.754187] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in hw.active (expected yes, found no)
<7> [190.754667] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] fastset requirement not met, forcing full modeset
<7> [190.755327] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no
<7> [190.755742] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:82:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0
<7> [190.756271] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:189:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [190.756801] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:188:DDI A/PHY A][CRTC:82:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7> [190.757261] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7> [190.757721] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [190.758125] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:188:DDI A/PHY A] [CRTC:82:pipe A]
<7> [190.758551] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in hw.active (expected yes, found no)
<7> [190.758983] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] fastset requirement not met, forcing full modeset
<7> [190.759591] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:189:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [190.760012] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:188:DDI A/PHY A][CRTC:82:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7> [190.760463] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7> [190.760818] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [190.761185] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:188:DDI A/PHY A] [CRTC:82:pipe A]
<7> [190.761605] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in hw.active (expected yes, found no)
<7> [190.761947] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] fastset requirement not met, forcing full modeset
<7> [190.762286] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no
<7> [190.762577] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:82:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0
<7> [190.762949] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 4054) -> ( 0 - 0), size 4054 -> 0
<7> [190.763196] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] ddb (4054 - 4096) -> ( 0 - 0), size 42 -> 0
<7> [190.763452] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [190.763677] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] lines 1, 12, 12, 12, 11, 12, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [190.763943] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] blocks 24, 289, 289, 289, 265, 289, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [190.764185] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] min_ddb 28, 319, 319, 319, 293, 319, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [190.764402] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:82:pipe A] data rate 0 num active planes 0
<7> [190.764714] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [190.764973] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [190.765267] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [190.765535] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [190.765785] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [190.766014] xe 0000:00:02.0: [drm:intel_modeset_calc_cdclk [xe]] Can change cdclk via squashing
<7> [190.766234] xe 0000:00:02.0: [drm:intel_modeset_calc_cdclk [xe]] New cdclk calculated to be logical 192000 kHz, actual 153600 kHz
<7> [190.766462] xe 0000:00:02.0: [drm:intel_modeset_calc_cdclk [xe]] New voltage level calculated to be logical 0, actual 0
<7> [190.766702] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [modeset]
<7> [190.766899] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [190.767132] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [190.767329] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [190.767550] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [190.767722] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [190.767887] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [190.768050] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7> [190.768206] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [190.768361] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [190.768557] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [190.768722] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [190.768868] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [190.769005] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [190.769135] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7> [190.769265] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [190.769423] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [190.769556] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [190.769676] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [190.769793] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [190.769910] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [190.770021] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0
<7> [190.770132] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 106 vsync start: 103, vsync end: 97
<7> [190.770258] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1800, vmax vblank: 1800, vmin vtotal: 1906, vmax vtotal: 1906
<7> [190.770376] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [190.770506] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [190.770611] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [190.770713] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [190.770812] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [190.770912] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710
<7> [190.771008] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7> [190.771104] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [190.771196] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [190.771288] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [190.771381] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000
<7> [190.771492] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [190.771598] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [190.771701] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [190.771800] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [190.771887] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [190.771968] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [190.772048] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [190.772133] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [190.772222] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [190.772310] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [190.772389] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [190.772479] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [190.772554] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:32:plane 1A] fb: [FB:190] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no
<7> [190.772630] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [190.772701] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:41:plane 2A] fb: [NOFB], visible: no
<7> [190.772771] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:50:plane 3A] fb: [NOFB], visible: no
<7> [190.772839] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:59:plane 4A] fb: [NOFB], visible: no
<7> [190.772905] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:68:plane 5A] fb: [NOFB], visible: no
<7> [190.772971] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:77:cursor A] fb: [NOFB], visible: no
<7> [190.773099] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [190.773187] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [190.773309] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2
<7> [190.790476] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<7> [190.996627] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 0
<7> [190.996996] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7> [191.007197] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power off
<7> [191.007609] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [191.007693] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [191.007951] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [191.008061] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7> [191.060297] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [191.060601] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7> [191.090087] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [191.090560] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7> [191.090463] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7> [191.090886] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:32:plane 1A]
<7> [191.090972] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7> [191.091382] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:188:DDI A/PHY A]
<7> [191.091636] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:197:DDI TC1/PHY TC1]
<7> [191.091826] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:199:DP-MST A]
<7> [191.092045] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:200:DP-MST B]
<7> [191.092238] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:201:DP-MST C]
<7> [191.092437] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:209:DDI TC2/PHY TC2]
<7> [191.092620] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:211:DP-MST A]
<7> [191.092800] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:212:DP-MST B]
<7> [191.092979] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DP-MST C]
<7> [191.093154] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DDI TC3/PHY TC3]
<7> [191.093334] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:219:DP-MST A]
<7> [191.093549] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:220:DP-MST B]
<7> [191.093735] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:221:DP-MST C]
<7> [191.093948] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [191.094189] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)
<7> [191.094404] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [191.094797] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [191.095162] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:189:eDP-1]
<7> [191.095503] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:82:pipe A]
<7> [191.095774] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [191.096082] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [191.096340] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384
<7> [191.096424] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [191.096820] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7> [191.097173] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [191.097549] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7> [191.114458] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [191.114900] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [191.115294] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [191.115744] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [191.117570] xe 0000:00:02.0: [drm:xe_gt_suspend [xe]] GT0: suspending
<7> [191.119560] xe 0000:00:02.0: [drm:xe_gt_suspend [xe]] GT0: suspended
<7> [191.119831] xe 0000:00:02.0: [drm:xe_gt_suspend [xe]] GT1: suspending
<7> [191.121206] xe 0000:00:02.0: [drm:xe_gt_suspend [xe]] GT1: suspended
<7> [191.213497] xe 0000:00:02.0: [drm:xe_gt_resume [xe]] GT0: resuming
<7> [191.214586] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs
<7> [191.214959] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000
<7> [191.215330] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000
<7> [191.215740] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440
<7> [191.216086] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000
<7> [191.216434] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb154] = 0x00020000
<7> [191.216753] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f
<7> [191.217070] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7> [191.217485] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7> [191.220012] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT0: ADS capture alloc size changed from 45056 to 20480
<7> [191.221862] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7> [191.226560] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x80000534 [0x1A/05]
<7> [191.228364] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 6ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7> [191.229331] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7> [191.234965] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1
<7> [191.235167] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16
<7> [191.235357] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc
<7> [191.235600] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c
<7> [191.235774] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130
<7> [191.235939] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c
<7> [191.236095] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100
<7> [191.236248] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100
<7> [191.236411] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100
<7> [191.236564] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100
<7> [191.236707] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100
<7> [191.236847] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100
<7> [191.236981] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100
<7> [191.237111] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100
<7> [191.237239] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100
<7> [191.237402] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100
<7> [191.237552] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100
<7> [191.237677] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100
<7> [191.238156] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs
<7> [191.238308] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x2050] = 0x10001000
<7> [191.238476] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306
<7> [191.238608] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080
<7> [191.238729] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d0] = 0x1000dafc
<7> [191.238840] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d4] = 0x1000db01
<7> [191.238950] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d8] = 0x0000db1c
<7> [191.239079] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040
<7> [191.239214] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200
<7> [191.239331] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000
<7> [191.239450] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x08000800
<7> [191.239564] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002
<7> [191.239681] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x00002000
<7> [191.239780] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000
<7> [191.239874] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs
<7> [191.239963] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x22050] = 0x10001000
<7> [191.240049] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306
<7> [191.240131] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080
<7> [191.240217] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs
<7> [191.240299] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee050] = 0x10001000
<7> [191.240390] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306
<7> [191.240469] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080
<7> [191.240551] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs
<7> [191.240624] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a050] = 0x10001000
<7> [191.240696] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0306
<7> [191.240767] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080
<7> [191.240841] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d0] = 0x1000dafc
<7> [191.240911] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d4] = 0x1000db01
<7> [191.240980] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d8] = 0x0000db1c
<7> [191.241071] xe 0000:00:02.0: [drm:xe_gt_resume [xe]] GT0: resumed
<7> [191.241145] xe 0000:00:02.0: [drm:xe_gt_resume [xe]] GT1: resuming
<7> [191.241396] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs
<7> [191.241470] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000
<7> [191.241547] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x82a8] = 0x00800000
<7> [191.241620] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb604] = 0x08104440
<7> [191.241687] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb608] = 0x30200000
<7> [191.241755] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb654] = 0x00020000
<7> [191.241820] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb658] = 0x0000007f
<7> [191.241888] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f08] = 0x00000020
<7> [191.241947] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f10] = 0x00400000
<7> [191.242007] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f1c] = 0x00000008
<7> [191.242071] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7> [191.242157] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7> [191.243135] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT1: ADS capture alloc size changed from 45056 to 24576
<7> [191.244396] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7> [191.264170] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7> [191.264808] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7> [191.267410] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1
<7> [191.267689] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16
<7> [191.267939] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc
<7> [191.268177] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c
<7> [191.268488] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130
<7> [191.268714] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c
<7> [191.268959] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100
<7> [191.269172] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100
<7> [191.269391] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100
<7> [191.269613] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100
<7> [191.269832] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100
<7> [191.270031] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100
<7> [191.270226] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100
<7> [191.270438] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100
<7> [191.270632] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100
<7> [191.270826] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100
<7> [191.271050] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100
<7> [191.271237] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100
<7> [191.271493] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs
<7> [191.271721] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c0050] = 0x10001000
<7> [191.271948] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000
<7> [191.272223] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs
<7> [191.272433] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c8050] = 0x10001000
<7> [191.272651] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000
<7> [191.272856] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying gsccs0 save-restore MMIOs
<7> [191.273041] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a050] = 0x10001000
<7> [191.273214] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a0d4] = 0xc000c000
<7> [191.273463] xe 0000:00:02.0: [drm:xe_gt_resume [xe]] GT1: resumed
<7> [191.275657] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [191.275957] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7> [191.276204] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7> [191.276406] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7> [191.276621] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7> [191.276790] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7> [191.276991] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<6> [191.312233] [IGT] xe_pm: finished subtest s3-d3hot-basic-exec, SKIP
<6> [191.314017] [IGT] xe_pm: exiting, ret=77
<6> [191.316722] Console: switching to colour frame buffer device 180x56
<7> [191.340645] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:189:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [191.340997] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:188:DDI A/PHY A][CRTC:82:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7> [191.341263] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7> [191.341576] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [191.341806] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:188:DDI A/PHY A] [CRTC:82:pipe A]
<7> [191.342026] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in hw.active (expected no, found yes)
<7> [191.342239] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] fastset requirement not met, forcing full modeset
<7> [191.343418] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7> [191.343573] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:82:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1
<7> [191.343748] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054
<7> [191.343883] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] ddb ( 0 - 0) -> (4054 - 4096), size 0 -> 42
<7> [191.344009] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [191.344132] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 12, 12, 12, 11, 12, 0, 0, 0, 3, 0
<7> [191.344259] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 289, 289, 289, 265, 289, 0, 0, 38, 73, 87
<7> [191.344410] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 319, 319, 319, 293, 319, 0, 0, 39, 82, 88
<7> [191.344543] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:82:pipe A] data rate 1390840 num active planes 1
<7> [191.344697] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [191.344842] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [191.344982] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [191.345116] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [191.345248] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [191.345536] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (27165 kHz) > old min cdclk (0 kHz)
<7> [191.345663] xe 0000:00:02.0: [drm:intel_modeset_calc_cdclk [xe]] Can change cdclk via squashing
<7> [191.345785] xe 0000:00:02.0: [drm:intel_modeset_calc_cdclk [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz
<7> [191.345906] xe 0000:00:02.0: [drm:intel_modeset_calc_cdclk [xe]] New voltage level calculated to be logical 0, actual 0
<7> [191.346051] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [modeset]
<7> [191.346169] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [191.346279] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [191.346531] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [191.346640] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [191.346744] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [191.346848] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [191.346950] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7> [191.347051] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [191.347148] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [191.347243] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [191.347338] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [191.347452] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [191.347544] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [191.347631] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7> [191.347716] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [191.347802] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [191.347887] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [191.347969] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [191.348049] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [191.348131] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [191.348210] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0
<7> [191.348287] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 106 vsync start: 103, vsync end: 97
<7> [191.348366] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1800, vmax vblank: 1800, vmin vtotal: 1906, vmax vtotal: 1906
<7> [191.348467] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [191.348548] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [191.348628] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [191.348702] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [191.348774] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [191.348845] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710
<7> [191.348915] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7> [191.348982] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [191.349049] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [191.349117] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [191.349185] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000
<7> [191.349256] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [191.349324] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [191.349401] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [191.349469] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [191.349544] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [191.349605] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [191.349664] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [191.349721] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [191.349779] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [191.349839] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [191.349898] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [191.349957] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [191.350017] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:32:plane 1A] fb: [FB:190] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [191.350079] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [191.350138] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [191.350198] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:41:plane 2A] fb: [NOFB], visible: no
<7> [191.350257] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:50:plane 3A] fb: [NOFB], visible: no
<7> [191.350315] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:59:plane 4A] fb: [NOFB], visible: no
<7> [191.350383] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:68:plane 5A] fb: [NOFB], visible: no
<7> [191.350441] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:77:cursor A] fb: [NOFB], visible: no
<7> [191.350831] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [191.350916] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [191.351043] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [191.351177] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [191.351255] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [191.351338] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7> [191.351415] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:188:DDI A/PHY A]
<7> [191.351483] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:197:DDI TC1/PHY TC1]
<7> [191.351553] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:199:DP-MST A]
<7> [191.351612] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:200:DP-MST B]
<7> [191.351670] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:201:DP-MST C]
<7> [191.351727] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:209:DDI TC2/PHY TC2]
<7> [191.351782] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:211:DP-MST A]
<7> [191.351837] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:212:DP-MST B]
<7> [191.351892] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DP-MST C]
<7> [191.351945] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DDI TC3/PHY TC3]
<7> [191.351998] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:219:DP-MST A]
<7> [191.352052] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:220:DP-MST B]
<7> [191.352108] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:221:DP-MST C]
<7> [191.352164] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [191.352308] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)
<7> [191.352367] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7> [191.352467] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7> [191.353522] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power on
<7> [191.353614] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power cycle (237 ms remaining)
<7> [191.596723] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [191.617302] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [191.617820] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power on
<7> [191.618203] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [191.654575] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [191.654911] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7> [191.655201] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [191.655545] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7> [191.908517] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [191.910566] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7> [191.910852] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [191.914150] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7> [191.915474] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [191.916610] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7> [191.917779] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [191.918959] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [191.920274] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Clock recovery OK
<7> [191.920621] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7> [191.922288] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [191.922629] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7> [191.923377] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7> [191.923804] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7> [191.924122] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7> [191.924501] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 13892
<7> [191.925479] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 11059200 bytes of contiguous stolen space for FBC, limit: 2
<7> [191.925788] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:32:plane 1A]
<7> [191.940576] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7> [191.942384] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:189:eDP-1]
<7> [191.942761] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:82:pipe A]
<7> [191.945550] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
Created at 2025-03-21 15:03:49