igt@kms_plane_scaling@plane-upscale-20x20-with-pixel-format on shard-tglu@IGT

Detail	Value
Duration	2.70 seconds
Hostname	shard-tglu-4
Igt-Version	IGT-Version: 2.3-gdd89791db (x86_64) (Linux: 7.0.0-rc5-CI_DRM_18191-g5cb7d14d9bd2+ x86_64)
Out	Using IGT_SRANDOM=1774292938 for randomisation Opened device: /dev/dri/card0 Starting subtest: plane-upscale-20x20-with-pixel-format Starting dynamic subtest: pipe-A Trying on HDMI-A-1 Dynamic subtest pipe-A: SUCCESS (1.118s) Starting dynamic subtest: pipe-B Trying on HDMI-A-1 Dynamic subtest pipe-B: SUCCESS (1.175s) Starting dynamic subtest: pipe-C Trying on HDMI-A-1 Dynamic subtest pipe-C: SUCCESS (0.199s) Starting dynamic subtest: pipe-D Trying on HDMI-A-1 Dynamic subtest pipe-D: SUCCESS (0.200s) Subtest plane-upscale-20x20-with-pixel-format: SUCCESS (2.697s)
Err	Starting subtest: plane-upscale-20x20-with-pixel-format Starting dynamic subtest: pipe-A Dynamic subtest pipe-A: SUCCESS (1.118s) Starting dynamic subtest: pipe-B Dynamic subtest pipe-B: SUCCESS (1.175s) Starting dynamic subtest: pipe-C Dynamic subtest pipe-C: SUCCESS (0.199s) Starting dynamic subtest: pipe-D Dynamic subtest pipe-D: SUCCESS (0.200s) Subtest plane-upscale-20x20-with-pixel-format: SUCCESS (2.697s)
Dmesg	<6> [129.884227] Console: switching to colour dummy device 80x25 <6> [129.884688] [IGT] kms_plane_scaling: executing <7> [129.887486] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [129.888143] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc] <7> [129.888486] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [129.897978] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:598:DP-1] <7> [129.897987] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:598:DP-1] <7> [129.898179] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [129.898503] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [129.898751] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [129.898934] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [129.899118] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [129.899319] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [129.899595] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7> [129.903942] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:598:DP-1] disconnected <7> [129.904355] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:608:DP-2] <7> [129.904360] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:608:DP-2] <7> [129.904683] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [129.904942] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:608:DP-2] disconnected <7> [129.905325] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:617:DP-3] <7> [129.905329] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:617:DP-3] <7> [129.905636] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [129.905893] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:617:DP-3] disconnected <7> [129.906262] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:626:DP-4] <7> [129.906265] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:626:DP-4] <7> [129.906578] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [129.906830] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:626:DP-4] disconnected <7> [129.907418] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:588:HDMI-A-1] <7> [129.907429] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:588:HDMI-A-1] <7> [129.934214] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:588:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [129.934225] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:588:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [129.934228] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:588:HDMI-A-1] No deep color support on this HDMI sink. <7> [129.934231] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:588:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [129.934235] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:588:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [129.934238] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:588:HDMI-A-1] ELD monitor fitHeadlessGS <7> [129.934243] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:588:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [129.934247] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:588:HDMI-A-1] ELD size 64, SAD count 10 <7> [129.934668] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [129.934812] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [129.935377] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [129.935532] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [129.936341] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:588:HDMI-A-1] probed modes: <7> [129.936346] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5 <7> [129.936350] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 60 594000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [129.936354] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 60 593407 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [129.936357] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 30 297000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [129.936360] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 30 296703 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [129.936364] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 594000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [129.936367] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 593407 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [129.936370] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 30 297000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [129.936373] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 30 296703 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [129.936377] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 25 297000 3840 4896 4984 5280 2160 2168 2178 2250 0x40 0x5 <7> [129.936380] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 24 297000 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5 <7> [129.936383] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 24 296703 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5 <7> [129.936386] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3440x1440": 90 476140 3440 3448 3480 3520 1440 1441 1449 1503 0x40 0xa <7> [129.936389] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 75 443250 2560 2768 3048 3536 1600 1603 1609 1672 0x40 0x6 <7> [129.936392] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 60 348500 2560 2752 3032 3504 1600 1603 1609 1658 0x40 0x6 <7> [129.936396] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 120 497770 2560 2608 2640 2720 1440 1443 1448 1525 0x40 0xa <7> [129.936399] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 60 267027 2048 2200 2424 2800 1536 1537 1540 1589 0x0 0x6 <7> [129.936402] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1080": 120 495000 2560 3108 3152 3300 1080 1084 1089 1250 0x40 0x5 <7> [129.936405] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1080": 120 494505 2560 3108 3152 3300 1080 1084 1089 1250 0x40 0x5 <7> [129.936408] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1440": 75 297000 1920 2064 2288 2640 1440 1441 1444 1500 0x40 0x6 <7> [129.936411] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1440": 60 234000 1920 2048 2256 2600 1440 1441 1444 1500 0x40 0x6 <7> [129.936415] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2160x1200": 90 261420 2160 2208 2240 2320 1200 1203 1208 1252 0x40 0xa <7> [129.936418] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1856x1392": 75 288000 1856 1984 2208 2560 1392 1393 1396 1500 0x40 0x6 <7> [129.936421] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1856x1392": 60 218250 1856 1952 2176 2528 1392 1393 1396 1439 0x40 0x6 <7> [129.936424] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1792x1344": 75 261000 1792 1888 2104 2456 1344 1345 1348 1417 0x40 0x6 <7> [129.936427] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1792x1344": 60 204750 1792 1920 2120 2448 1344 1345 1348 1394 0x40 0x6 <7> [129.936430] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1152": 60 162000 2048 2074 2154 2250 1152 1153 1156 1200 0x40 0x5 <7> [129.936433] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x40 0xa <7> [129.936437] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 75 245250 1920 2056 2264 2608 1200 1203 1209 1255 0x40 0x6 <7> [129.936440] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6 <7> [129.936443] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 120 297000 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [129.936446] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 120 296703 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [129.936449] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 75 220597 1920 2056 2264 2608 1080 1081 1084 1128 0x0 0x6 <7> [129.936452] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [129.936455] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [129.936458] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 75 202500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [129.936462] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 70 189000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [129.936465] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 65 175500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [129.936468] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [129.936471] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 75 187000 1680 1800 1976 2272 1050 1053 1059 1099 0x40 0x6 <7> [129.936474] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 <7> [129.936478] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x945": 60 131481 1680 1784 1960 2240 945 946 949 978 0x0 0x6 <7> [129.936481] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 75 156000 1400 1504 1648 1896 1050 1053 1057 1099 0x40 0x6 <7> [129.936484] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6 <7> [129.936487] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [129.936491] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [129.936494] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [129.936497] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x900": 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6 <7> [129.936500] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x900": 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6 <7> [129.936503] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 <7> [129.936507] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6 <7> [129.936510] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5 <7> [129.936513] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6 <7> [129.936516] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 <7> [129.936519] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 <7> [129.936523] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x768": 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x6 <7> [129.936526] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x768": 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6 <7> [129.936529] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [129.936532] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 <7> [129.936535] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa <7> [129.936538] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [129.936541] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46970 1024 1064 1168 1312 576 577 580 597 0x0 0x6 <7> [129.936545] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa <7> [129.936548] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 <7> [129.936551] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 <7> [129.936554] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [129.936557] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [129.936560] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [129.936563] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa <7> [129.936567] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa <7> [129.936570] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [129.936573] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [129.936576] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 <7> [129.936617] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:598:DP-1] <7> [129.936621] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:598:DP-1] <7> [129.940959] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:598:DP-1] disconnected <7> [129.940979] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:608:DP-2] <7> [129.940983] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:608:DP-2] <7> [129.941316] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:608:DP-2] disconnected <7> [129.941330] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:617:DP-3] <7> [129.941334] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:617:DP-3] <7> [129.941650] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:617:DP-3] disconnected <7> [129.941663] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:626:DP-4] <7> [129.941667] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:626:DP-4] <7> [129.941981] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:626:DP-4] disconnected <6> [129.942410] [IGT] kms_plane_scaling: starting subtest plane-upscale-20x20-with-pixel-format <6> [129.942965] [IGT] kms_plane_scaling: starting dynamic subtest pipe-A <7> [129.944564] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [129.944735] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [129.945267] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [129.945429] i915 0000:00:02.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6) <7> [129.945957] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [129.946101] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [129.946628] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [129.947341] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [129.947489] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [129.948029] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [129.948179] i915 0000:00:02.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6) <7> [129.949053] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [129.949213] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [129.949755] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [129.950458] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [129.950605] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [129.951117] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [129.951345] i915 0000:00:02.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6) <7> [129.951897] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [129.952038] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [129.952546] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [129.953518] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [129.955316] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1 <7> [129.955528] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [129.955688] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 1, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [129.955845] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 16, 129, 129, 129, 129, 177, 257, 257, 30, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [129.955999] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 19, 143, 143, 143, 143, 196, 284, 284, 31, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [129.956178] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 571000 num active planes 1 <7> [129.956370] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [129.956531] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [129.956715] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:35 <7> [129.961062] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:35:plane 1A] <7> [129.961261] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 10240 bytes of contiguous stolen space for FBC, limit: 2 <7> [129.961424] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:35:plane 1A] <7> [129.969818] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A <7> [129.970057] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [129.970101] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:638] is removed <7> [129.970125] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0 <7> [129.970334] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [129.970494] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [129.970649] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [129.970803] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [129.970956] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [129.971128] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [129.971302] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [129.977728] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:35:plane 1A] <7> [129.986347] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [129.986467] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1 <7> [129.986673] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [129.986838] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [129.986996] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [129.987153] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [129.987332] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [129.987692] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1 <7> [129.987941] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [129.988171] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [129.988430] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [129.988659] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [129.988891] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [129.989197] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1 <7> [129.989461] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [129.989690] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [129.989912] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [129.990138] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [129.990378] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [129.990619] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1 <7> [129.990862] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [129.991096] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [129.991406] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:35 <7> [129.992068] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 20480 bytes of contiguous stolen space for FBC, limit: 1 <7> [129.992324] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:35:plane 1A] <7> [129.994623] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [129.994694] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:638] is removed <7> [129.994726] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0 <7> [129.994991] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [129.995231] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [129.995459] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [129.995685] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [129.995912] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [129.996162] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [129.996420] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.002729] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:35:plane 1A] <7> [130.011478] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.011601] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1 <7> [130.011809] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.011977] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.012137] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.012311] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.012483] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.012697] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1 <7> [130.012868] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.013023] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.013175] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.013346] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.013499] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.013696] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1 <7> [130.013863] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.014016] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.014167] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.014333] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.014485] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.014651] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1 <7> [130.014816] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [130.014976] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.015166] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:35 <7> [130.019594] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.019636] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:638] is removed <7> [130.019657] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.019854] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.020018] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.020176] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.020355] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.020511] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.020683] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.020846] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.028053] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.028171] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1 <7> [130.028421] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.028668] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.028896] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.029120] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 <7> [130.029404] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 <7> [130.029659] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 2284000 num active planes 1 <7> [130.029898] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 2284 <7> [130.030135] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.030447] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 17844 kHz -> 35688 kHz <7> [130.030688] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:35 <7> [130.036288] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.036338] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:638] is removed <7> [130.036359] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.036543] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.036688] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.036830] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.036971] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.037108] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.037312] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.037560] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.044923] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.045037] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1 <7> [130.045260] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.045429] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.045585] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.045740] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [130.045894] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [130.046066] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 571000 num active planes 1 <7> [130.046243] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [130.046405] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.046595] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:35 <7> [130.052944] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.052987] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:638] is removed <7> [130.053009] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.053220] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.053386] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.053544] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.053699] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.053855] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.054029] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.054196] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.061569] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.061665] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1 <7> [130.061857] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:35:plane 1A] using Y plane [PLANE:145:plane 6A] <7> [130.062043] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677 <7> [130.062223] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316 <7> [130.062462] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.062693] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.062921] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [130.063151] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [130.063404] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.063642] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.063865] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0 <7> [130.064094] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0 <7> [130.064365] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 856500 num active planes 2 <7> [130.064606] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 857 <7> [130.064849] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.065143] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:35 <7> [130.069607] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.069651] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:638] is removed <7> [130.069679] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.069875] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 677) -> ( 0 - 0), size 677 -> 0 <7> [130.070037] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 677 - 1993) -> ( 0 - 0), size 1316 -> 0 <7> [130.070197] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.070381] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.070612] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.070840] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.071068] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.071309] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.071538] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.071763] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.072014] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.072259] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.078220] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.078323] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1 <7> [130.078499] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:35:plane 1A] using Y plane [PLANE:145:plane 6A] <7> [130.078671] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677 <7> [130.078817] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316 <7> [130.078959] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.079101] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.079268] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.079424] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.079579] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.079731] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.079886] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [130.080038] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [130.080217] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1713000 num active planes 2 <7> [130.080385] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1713 <7> [130.080547] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.080738] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:35 <7> [130.086310] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.086353] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:638] is removed <7> [130.086378] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.086565] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 677) -> ( 0 - 0), size 677 -> 0 <7> [130.086717] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 677 - 1993) -> ( 0 - 0), size 1316 -> 0 <7> [130.086859] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.087000] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.087139] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.087301] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.087460] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.087614] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.087766] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.087919] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.088095] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.088268] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.094868] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.094986] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1 <7> [130.095191] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.095382] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.095629] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.095857] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.096087] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.096366] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1 <7> [130.096607] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [130.096843] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.097134] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:35 <7> [130.102883] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.102926] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:638] is removed <7> [130.102947] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.103133] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.103315] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.103547] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.103776] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.104005] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.104262] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.104502] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.111589] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.111702] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1 <7> [130.111904] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.112070] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.112240] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.112396] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.112551] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.112724] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1 <7> [130.112888] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [130.113048] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.113245] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:35 <7> [130.119581] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.119625] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:638] is removed <7> [130.119648] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.119847] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.120015] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.120174] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.120352] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.120513] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.120683] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.120847] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.128764] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.128871] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1 <7> [130.129096] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.129303] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.129479] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.129654] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.129826] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.130068] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1 <7> [130.130308] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.130487] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.130660] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.130830] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.131006] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.131251] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1 <7> [130.131444] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.131618] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.131789] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.131959] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.132112] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.132306] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1 <7> [130.132479] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [130.132641] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.132836] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:35 <7> [130.136286] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.136334] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:638] is removed <7> [130.136356] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.136552] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.136716] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.136875] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.137031] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.137186] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.137382] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.137546] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.144888] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.145006] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1 <7> [130.145229] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.145475] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.145706] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.145935] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 <7> [130.146165] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 <7> [130.146515] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1 <7> [130.146760] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.146989] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.147222] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.147445] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 <7> [130.147668] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 <7> [130.147972] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1 <7> [130.148227] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.148451] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.148681] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.148909] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 <7> [130.149136] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 <7> [130.149392] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 2284000 num active planes 1 <7> [130.149632] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 2284 <7> [130.149868] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.150153] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:35 <7> [130.152954] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.153024] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:638] is removed <7> [130.153055] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.153346] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.153579] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.153811] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.154037] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.154268] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.154521] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.154759] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.161395] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.161528] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: staged scaling request for 20x20->1920x1080 scaler_users = 0x2 <7> [130.161728] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.161896] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.162054] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.162224] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [130.162381] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [130.162554] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 571000 num active planes 1 <7> [130.162717] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [130.162877] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.163066] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:65 <7> [130.169664] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.169709] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:65:plane 2A] because [FB:638] is removed <7> [130.169731] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.169932] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.170095] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.170285] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.170444] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.170599] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.170771] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.170936] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.178047] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.178165] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: staged scaling request for 20x20->1920x1080 scaler_users = 0x2 <7> [130.178416] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.178662] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.178893] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.179120] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.179369] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.179625] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1 <7> [130.179869] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [130.180106] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.180410] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:65 <7> [130.186233] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.186275] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:65:plane 2A] because [FB:638] is removed <7> [130.186296] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.186485] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.186645] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.186802] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.186958] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.187114] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.187320] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.187567] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.194750] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.194870] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: staged scaling request for 20x20->1920x1080 scaler_users = 0x2 <7> [130.195077] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.195267] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.195428] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.195585] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.195741] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.195916] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1 <7> [130.196118] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [130.196309] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.196504] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:65 <7> [130.202971] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.203015] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:65:plane 2A] because [FB:638] is removed <7> [130.203037] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.203247] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.203411] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.203569] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.203725] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.203883] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.204060] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.204255] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.211403] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.211515] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: staged scaling request for 20x20->1920x1080 scaler_users = 0x2 <7> [130.211720] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.211887] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.212044] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.212200] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 <7> [130.212392] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 <7> [130.212669] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 2284000 num active planes 1 <7> [130.212923] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 2284 <7> [130.213172] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.213515] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:65 <7> [130.219564] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.219607] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:65:plane 2A] because [FB:638] is removed <7> [130.219628] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.219821] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.219983] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.220142] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.220320] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.220562] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.220821] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.221064] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.228320] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.228412] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: staged scaling request for 20x20->1920x1080 scaler_users = 0x2 <7> [130.228599] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.228750] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.228894] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.229035] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [130.229174] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [130.229385] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 571000 num active planes 1 <7> [130.229552] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [130.229712] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.229901] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:65 <7> [130.236326] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.236366] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:65:plane 2A] because [FB:638] is removed <7> [130.236388] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.236572] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.236722] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.236866] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.237027] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.237195] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.237436] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.237617] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.245043] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.245173] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: staged scaling request for 20x20->1920x1080 scaler_users = 0x2 <7> [130.245407] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:65:plane 2A] using Y plane [PLANE:145:plane 6A] <7> [130.245687] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677 <7> [130.245923] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316 <7> [130.246170] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.246445] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.246697] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [130.246944] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [130.247196] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.247474] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.247728] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0 <7> [130.247970] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0 <7> [130.248254] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 856500 num active planes 2 <7> [130.248518] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 857 <7> [130.248774] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.249087] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:65 <7> [130.252984] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.253026] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:65:plane 2A] because [FB:638] is removed <7> [130.253054] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.253269] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 677) -> ( 0 - 0), size 677 -> 0 <7> [130.253507] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 677 - 1993) -> ( 0 - 0), size 1316 -> 0 <7> [130.253741] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.253967] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.254195] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.254516] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.254743] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.254968] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.255198] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.255450] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.255708] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.255949] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.261573] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.261689] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: staged scaling request for 20x20->1920x1080 scaler_users = 0x2 <7> [130.261914] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: staged scaling request for 20x20->1920x1080 scaler_users = 0x2 <7> [130.262087] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:65:plane 2A] using Y plane [PLANE:145:plane 6A] <7> [130.262298] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677 <7> [130.262460] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316 <7> [130.262614] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.262768] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.262922] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.263076] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.263256] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.263417] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.263570] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [130.263723] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [130.263939] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: staged scaling request for 20x20->1920x1080 scaler_users = 0x2 <7> [130.264099] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:65:plane 2A] using Y plane [PLANE:145:plane 6A] <7> [130.264292] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677 <7> [130.264447] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316 <7> [130.264605] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.264761] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.264914] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.265068] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.265228] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.265380] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.265531] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [130.265682] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [130.265841] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1713000 num active planes 2 <7> [130.266004] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1713 <7> [130.266163] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.266370] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:65 <7> [130.269647] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.269692] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:65:plane 2A] because [FB:638] is removed <7> [130.269720] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.269917] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 677) -> ( 0 - 0), size 677 -> 0 <7> [130.270083] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 677 - 1993) -> ( 0 - 0), size 1316 -> 0 <7> [130.270258] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.270417] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.270573] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.270728] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.270882] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.271034] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.271187] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.271368] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.271539] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.271701] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.278183] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.278339] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: staged scaling request for 20x20->1920x1080 scaler_users = 0x2 <7> [130.278572] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.278735] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.278894] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.279052] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.279218] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.279552] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: staged scaling request for 20x20->1920x1080 scaler_users = 0x2 <7> [130.279805] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.280034] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.280278] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.280506] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.280729] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.281040] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: staged scaling request for 20x20->1920x1080 scaler_users = 0x2 <7> [130.281293] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.281519] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.281745] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.281968] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.282189] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.282447] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1 <7> [130.282684] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [130.282925] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.283220] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:65 <7> [130.286314] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.286383] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:65:plane 2A] because [FB:638] is removed <7> [130.286414] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.286680] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.286909] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.287132] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.287382] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.287609] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.287865] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.288107] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.294931] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.295044] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: staged scaling request for 20x20->1920x1080 scaler_users = 0x2 <7> [130.295266] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.295435] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.295594] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.295750] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.295906] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.296078] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1 <7> [130.296267] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [130.296429] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.296620] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:65 <7> [130.302969] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.303013] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:65:plane 2A] because [FB:638] is removed <7> [130.303034] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.303245] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.303409] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.303564] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.303719] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.303874] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.304045] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.304216] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.311664] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.311759] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: staged scaling request for 20x20->1920x1080 scaler_users = 0x2 <7> [130.311959] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.312125] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.312305] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.312479] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.312634] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.312804] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1 <7> [130.312968] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [130.313128] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.313350] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:65 <7> [130.319664] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.319709] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:65:plane 2A] because [FB:638] is removed <7> [130.319731] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.319929] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.320094] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.320269] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.320432] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.320586] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.320759] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.320922] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.328228] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.328333] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: staged scaling request for 20x20->1920x1080 scaler_users = 0x2 <7> [130.328523] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.328676] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.328817] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.328957] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 <7> [130.329098] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 <7> [130.329302] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 2284000 num active planes 1 <7> [130.329555] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 2284 <7> [130.329793] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.330078] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:65 <7> [130.336355] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.336400] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:65:plane 2A] because [FB:638] is removed <7> [130.336422] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.336621] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.336785] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.336943] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.337099] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.337272] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.337557] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.337801] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.344736] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.344870] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: staged scaling request for 20x20->1920x1080 scaler_users = 0x4 <7> [130.345081] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.345271] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.345435] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.345596] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [130.345755] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [130.345936] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 571000 num active planes 1 <7> [130.346105] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [130.346290] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.346485] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:95 <7> [130.352986] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.353031] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:95:plane 3A] because [FB:638] is removed <7> [130.353051] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.353268] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.353435] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.353593] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.353747] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.353906] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.354091] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.354306] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.361473] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.361587] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: staged scaling request for 20x20->1920x1080 scaler_users = 0x4 <7> [130.361789] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.361956] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.362115] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.362300] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.362549] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.362816] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1 <7> [130.363076] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [130.363364] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.363680] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:95 <7> [130.369620] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.369665] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:95:plane 3A] because [FB:638] is removed <7> [130.369687] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.369884] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.370050] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.370225] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.370456] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.370683] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.370941] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.371180] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.378080] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.378198] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: staged scaling request for 20x20->1920x1080 scaler_users = 0x4 <7> [130.378422] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.378590] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.378746] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.378901] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.379054] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.379245] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1 <7> [130.379412] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [130.379573] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.379763] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:95 <7> [130.386334] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.386376] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:95:plane 3A] because [FB:638] is removed <7> [130.386398] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.386594] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.386760] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.386932] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.387099] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.387285] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.387492] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.387670] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.394764] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.394863] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: staged scaling request for 20x20->1920x1080 scaler_users = 0x4 <7> [130.395066] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.395255] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.395490] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.395717] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 <7> [130.395980] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 <7> [130.396368] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: staged scaling request for 20x20->1920x1080 scaler_users = 0x4 <7> [130.396652] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.396908] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.397170] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.397461] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 <7> [130.397726] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 <7> [130.398076] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: staged scaling request for 20x20->1920x1080 scaler_users = 0x4 <7> [130.398384] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.398649] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.398906] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.399135] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 <7> [130.399384] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 <7> [130.399623] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 2284000 num active planes 1 <7> [130.399864] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 2284 <7> [130.400097] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.400404] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:95 <7> [130.402993] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.403061] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:95:plane 3A] because [FB:638] is removed <7> [130.403090] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.403389] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.403617] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.403844] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.404070] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.404320] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.404575] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.404811] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.411590] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.411705] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: staged scaling request for 20x20->1920x1080 scaler_users = 0x4 <7> [130.411911] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.412078] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.412272] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.412434] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [130.412591] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [130.412808] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: staged scaling request for 20x20->1920x1080 scaler_users = 0x4 <7> [130.412981] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.413136] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.413301] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.413454] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [130.413608] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [130.413804] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: staged scaling request for 20x20->1920x1080 scaler_users = 0x4 <7> [130.413968] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.414120] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.414296] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.414449] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [130.414608] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [130.414772] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 571000 num active planes 1 <7> [130.414935] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [130.415097] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.415299] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:95 <7> [130.419635] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.419680] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:95:plane 3A] because [FB:638] is removed <7> [130.419701] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.419898] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.420061] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.420232] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.420391] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.420546] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.420716] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.420879] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.428232] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.428328] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: staged scaling request for 20x20->1920x1080 scaler_users = 0x4 <7> [130.428520] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:95:plane 3A] using Y plane [PLANE:145:plane 6A] <7> [130.428708] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677 <7> [130.428869] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316 <7> [130.429026] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.429180] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.429356] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [130.429601] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [130.429827] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.430053] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.430301] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0 <7> [130.430536] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0 <7> [130.430794] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 856500 num active planes 2 <7> [130.431033] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 857 <7> [130.431279] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.431568] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:95 <7> [130.436271] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.436316] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:95:plane 3A] because [FB:638] is removed <7> [130.436343] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.436534] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 677) -> ( 0 - 0), size 677 -> 0 <7> [130.436691] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 677 - 1993) -> ( 0 - 0), size 1316 -> 0 <7> [130.436847] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.437001] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.437156] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.437328] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.437482] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.437633] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.437785] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.437935] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.438105] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.438286] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.445028] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.445145] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: staged scaling request for 20x20->1920x1080 scaler_users = 0x4 <7> [130.445360] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:95:plane 3A] using Y plane [PLANE:145:plane 6A] <7> [130.445548] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677 <7> [130.445710] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316 <7> [130.445868] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.446024] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.446179] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.446373] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.446530] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.446685] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.446838] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [130.446991] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [130.447182] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1713000 num active planes 2 <7> [130.447380] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1713 <7> [130.447542] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.447734] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:95 <7> [130.452992] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.453041] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:95:plane 3A] because [FB:638] is removed <7> [130.453071] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.453323] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 677) -> ( 0 - 0), size 677 -> 0 <7> [130.453510] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 677 - 1993) -> ( 0 - 0), size 1316 -> 0 <7> [130.453692] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.453871] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.454055] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.454256] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.454446] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.454634] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.454822] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.455009] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.455234] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.455453] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.461591] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.461702] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: staged scaling request for 20x20->1920x1080 scaler_users = 0x4 <7> [130.461903] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.462068] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.462247] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.462421] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.462575] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.462746] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1 <7> [130.462911] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [130.463070] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.463290] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:95 <7> [130.469657] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.469703] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:95:plane 3A] because [FB:638] is removed <7> [130.469725] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.469921] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.470084] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.470261] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.470432] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.470586] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.470759] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.470922] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.478372] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.478478] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: staged scaling request for 20x20->1920x1080 scaler_users = 0x4 <7> [130.478702] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.478892] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.479073] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.479272] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.479455] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.479654] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1 <7> [130.479842] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [130.480027] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.480279] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:95 <7> [130.486315] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.486361] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:95:plane 3A] because [FB:638] is removed <7> [130.486382] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.486580] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.486749] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.486936] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.487122] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.487332] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.487533] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.487727] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.494982] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.495093] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: staged scaling request for 20x20->1920x1080 scaler_users = 0x4 <7> [130.495334] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.495509] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.495670] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.495862] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.496065] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.496331] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1 <7> [130.496552] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [130.496763] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.497011] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:95 <7> [130.502972] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.503020] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:95:plane 3A] because [FB:638] is removed <7> [130.503042] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.503273] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.503454] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.503621] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.503788] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.503951] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.504133] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.504323] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.511649] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.511756] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: staged scaling request for 20x20->1920x1080 scaler_users = 0x4 <7> [130.511990] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.512185] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.512399] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.512586] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 <7> [130.512770] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 <7> [130.512974] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 2284000 num active planes 1 <7> [130.513171] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 2284 <7> [130.513404] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.513643] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:95 <7> [130.519687] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.519731] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:95:plane 3A] because [FB:638] is removed <7> [130.519753] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.519967] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.520158] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.520377] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.520565] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.520750] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.520955] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.521148] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.528101] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.528290] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: staged scaling request for 20x20->1920x1080 scaler_users = 0x8 <7> [130.528495] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.528659] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.528855] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.529060] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [130.529289] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [130.529601] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: staged scaling request for 20x20->1920x1080 scaler_users = 0x8 <7> [130.529822] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.530024] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.530244] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.530463] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [130.530662] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [130.530871] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 571000 num active planes 1 <7> [130.531084] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [130.531315] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.531587] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:125 <7> [130.536359] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.536403] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:125:plane 4A] because [FB:638] is removed <7> [130.536425] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.536622] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.536785] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.536942] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.537097] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.537289] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.537478] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.537640] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.544736] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.544851] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: staged scaling request for 20x20->1920x1080 scaler_users = 0x8 <7> [130.545049] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.545241] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.545402] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.545559] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.545713] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.545927] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: staged scaling request for 20x20->1920x1080 scaler_users = 0x8 <7> [130.546094] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.546273] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.546426] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.546577] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.546727] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.546928] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: staged scaling request for 20x20->1920x1080 scaler_users = 0x8 <7> [130.547091] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.547253] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.547406] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.547558] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.547708] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.547867] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1 <7> [130.548028] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [130.548209] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.548428] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:125 <7> [130.553038] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.553082] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:125:plane 4A] because [FB:638] is removed <7> [130.553103] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.553343] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.553507] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.553664] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.553818] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.553971] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.554140] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.554320] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.561507] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.561596] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: staged scaling request for 20x20->1920x1080 scaler_users = 0x8 <7> [130.561779] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.561931] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.562077] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.562233] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.562408] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.562582] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1 <7> [130.562746] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [130.562919] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.563120] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:125 <7> [130.569653] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.569696] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:125:plane 4A] because [FB:638] is removed <7> [130.569718] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.569915] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.570078] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.570255] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.570438] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.570594] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.570766] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.570928] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.578320] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.578412] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: staged scaling request for 20x20->1920x1080 scaler_users = 0x8 <7> [130.578598] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.578749] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.578895] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.579036] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [130.579175] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [130.579400] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 571000 num active planes 1 <7> [130.579581] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [130.579742] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.579964] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:125 <7> [130.586369] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.586415] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:125:plane 4A] because [FB:638] is removed <7> [130.586438] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.586642] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.586811] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.586972] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.587132] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.587334] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.587531] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.587700] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.595060] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.595189] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: staged scaling request for 20x20->1920x1080 scaler_users = 0x8 <7> [130.595442] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:125:plane 4A] using Y plane [PLANE:145:plane 6A] <7> [130.595663] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677 <7> [130.595854] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316 <7> [130.596037] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.596263] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.596467] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [130.596649] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [130.596830] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.597010] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.597191] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0 <7> [130.597397] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0 <7> [130.597606] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 856500 num active planes 2 <7> [130.597800] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 857 <7> [130.597979] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.598194] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:125 <7> [130.603034] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.603079] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:125:plane 4A] because [FB:638] is removed <7> [130.603105] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.603334] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 677) -> ( 0 - 0), size 677 -> 0 <7> [130.603498] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 677 - 1993) -> ( 0 - 0), size 1316 -> 0 <7> [130.603657] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.603811] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.603991] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.604143] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.604313] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.604467] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.604620] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.604774] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.604943] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.605105] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.611585] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.611695] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: staged scaling request for 20x20->1920x1080 scaler_users = 0x8 <7> [130.611885] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:125:plane 4A] using Y plane [PLANE:145:plane 6A] <7> [130.612069] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677 <7> [130.612246] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316 <7> [130.612443] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.612598] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.612752] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.612904] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.613056] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.613209] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.613384] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [130.613549] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [130.613721] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1713000 num active planes 2 <7> [130.613883] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1713 <7> [130.614045] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.614262] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:125 <7> [130.619940] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.619987] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:125:plane 4A] because [FB:638] is removed <7> [130.620015] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.620235] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 677) -> ( 0 - 0), size 677 -> 0 <7> [130.620411] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 677 - 1993) -> ( 0 - 0), size 1316 -> 0 <7> [130.620569] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.620725] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.620881] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.621034] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.621189] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.621399] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.621555] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.621708] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.621882] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.622045] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.628319] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.628416] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: staged scaling request for 20x20->1920x1080 scaler_users = 0x8 <7> [130.628616] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.628780] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.628938] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.629094] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.629265] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.629442] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1 <7> [130.629607] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [130.629768] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.629959] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:125 <7> [130.636337] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.636382] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:125:plane 4A] because [FB:638] is removed <7> [130.636403] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.636599] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.636765] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.636924] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.637081] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.637248] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.637422] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.637585] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.645101] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.645257] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: staged scaling request for 20x20->1920x1080 scaler_users = 0x8 <7> [130.645489] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.645657] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.645819] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.645981] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.646139] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.646349] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1 <7> [130.646526] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [130.646690] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.646890] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:125 <7> [130.653000] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.653045] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:125:plane 4A] because [FB:638] is removed <7> [130.653068] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.653297] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.653466] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.653624] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.653781] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.653938] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.654108] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.654341] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.661701] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.661823] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: staged scaling request for 20x20->1920x1080 scaler_users = 0x8 <7> [130.662043] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.662244] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.662419] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.662589] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.662756] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.662989] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: staged scaling request for 20x20->1920x1080 scaler_users = 0x8 <7> [130.663169] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.663374] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.663540] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.663706] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.663880] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.664124] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: staged scaling request for 20x20->1920x1080 scaler_users = 0x8 <7> [130.664366] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.664551] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.664733] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.664913] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.665094] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.665310] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1 <7> [130.665504] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [130.665699] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.665924] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:125 <7> [130.669701] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.669744] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:125:plane 4A] because [FB:638] is removed <7> [130.669765] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.669962] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.670126] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.670300] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.670482] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.670637] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.670809] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.670976] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.678227] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.678348] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: staged scaling request for 20x20->1920x1080 scaler_users = 0x10 <7> [130.678550] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.678716] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.678875] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.679032] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [130.679185] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [130.679487] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: staged scaling request for 20x20->1920x1080 scaler_users = 0x10 <7> [130.679747] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.679975] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.680196] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.680448] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [130.680607] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [130.680823] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: staged scaling request for 20x20->1920x1080 scaler_users = 0x10 <7> [130.680990] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.681145] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.681351] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.681575] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [130.681798] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [130.682032] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 571000 num active planes 1 <7> [130.682275] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [130.682481] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.682675] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:135 <7> [130.686372] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.686416] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:135:plane 5A] because [FB:638] is removed <7> [130.686436] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.686626] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.686787] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.686944] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.687100] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.687276] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.687534] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.687777] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.694820] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.694938] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: staged scaling request for 20x20->1920x1080 scaler_users = 0x10 <7> [130.695142] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.695324] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.695510] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.695666] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.695822] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.695997] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1 <7> [130.696163] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [130.696357] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.696578] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:135 <7> [130.703037] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.703081] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:135:plane 5A] because [FB:638] is removed <7> [130.703103] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.703353] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.703537] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.703694] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.703851] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.704005] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.704175] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.704361] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.711479] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.711587] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: staged scaling request for 20x20->1920x1080 scaler_users = 0x10 <7> [130.711776] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.711941] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.712100] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.712290] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.712517] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.712773] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1 <7> [130.713012] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [130.713259] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.713471] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:135 <7> [130.719765] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.719810] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:135:plane 5A] because [FB:638] is removed <7> [130.719830] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.720028] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.720191] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.720393] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.720625] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.720855] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.721160] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.721484] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.728356] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.728473] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: staged scaling request for 20x20->1920x1080 scaler_users = 0x10 <7> [130.728678] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.728851] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.729013] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.729172] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [130.729357] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [130.729576] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 571000 num active planes 1 <7> [130.729743] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [130.729944] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.730200] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:135 <7> [130.736405] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.736452] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:135:plane 5A] because [FB:638] is removed <7> [130.736475] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.736688] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.736868] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.737040] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.737210] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.737439] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.737658] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.737837] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.745018] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.745140] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: staged scaling request for 20x20->1920x1080 scaler_users = 0x10 <7> [130.745405] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:135:plane 5A] using Y plane [PLANE:145:plane 6A] <7> [130.745729] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677 <7> [130.746008] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316 <7> [130.746297] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.746552] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.746739] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [130.746921] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [130.747103] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.747355] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.747622] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0 <7> [130.747892] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0 <7> [130.748168] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 856500 num active planes 2 <7> [130.748452] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 857 <7> [130.748655] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.748865] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:135 <7> [130.753035] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.753080] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:135:plane 5A] because [FB:638] is removed <7> [130.753106] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.753339] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 677) -> ( 0 - 0), size 677 -> 0 <7> [130.753571] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 677 - 1993) -> ( 0 - 0), size 1316 -> 0 <7> [130.753801] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.754032] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.754266] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.754424] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.754580] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.754733] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.754918] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.755144] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.755414] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.755654] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.761659] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.761755] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: staged scaling request for 20x20->1920x1080 scaler_users = 0x10 <7> [130.761943] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:135:plane 5A] using Y plane [PLANE:145:plane 6A] <7> [130.762129] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677 <7> [130.762340] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316 <7> [130.762576] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.762803] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.763031] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.763262] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.763442] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.763597] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.763753] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [130.763906] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [130.764147] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1713000 num active planes 2 <7> [130.764406] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1713 <7> [130.764643] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.764926] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:135 <7> [130.769733] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.769779] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:135:plane 5A] because [FB:638] is removed <7> [130.769807] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.770007] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 677) -> ( 0 - 0), size 677 -> 0 <7> [130.770175] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 677 - 1993) -> ( 0 - 0), size 1316 -> 0 <7> [130.770369] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.770601] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.770836] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.771062] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.771346] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.771540] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.771702] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.771859] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.772034] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.772243] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.778306] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.778398] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: staged scaling request for 20x20->1920x1080 scaler_users = 0x10 <7> [130.778588] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.778739] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.778885] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.779026] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.779165] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.779360] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1 <7> [130.779555] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [130.779715] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.779907] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:135 <7> [130.786388] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.786449] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:135:plane 5A] because [FB:638] is removed <7> [130.786477] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.786740] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.786892] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.787033] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.787173] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.787363] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.787536] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.787699] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.795023] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.795143] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: staged scaling request for 20x20->1920x1080 scaler_users = 0x10 <7> [130.795385] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.795626] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.795853] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.796083] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.796332] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.796614] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: staged scaling request for 20x20->1920x1080 scaler_users = 0x10 <7> [130.796787] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.796947] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.797104] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.797319] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.797544] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.797859] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: staged scaling request for 20x20->1920x1080 scaler_users = 0x10 <7> [130.798110] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.798359] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.798520] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.798680] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.798840] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.799010] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1 <7> [130.799254] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [130.799491] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.799783] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:135 <7> [130.803013] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.803056] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:135:plane 5A] because [FB:638] is removed <7> [130.803077] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.803296] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.803534] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.803764] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.803989] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.804206] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.804405] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.804569] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.811642] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.811758] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: staged scaling request for 20x20->1920x1080 scaler_users = 0x10 <7> [130.811961] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.812127] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.812305] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.812497] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.812651] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.812869] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: staged scaling request for 20x20->1920x1080 scaler_users = 0x10 <7> [130.813035] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.813190] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.813367] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.813547] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.813701] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.813899] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: staged scaling request for 20x20->1920x1080 scaler_users = 0x10 <7> [130.814062] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.814227] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.814409] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.814566] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.814721] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.814883] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1 <7> [130.815047] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [130.815208] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.815437] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:135 <7> [130.819678] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.819720] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:135:plane 5A] because [FB:638] is removed <7> [130.819741] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.819924] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.820080] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.820268] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.820442] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.820598] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.820772] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.820936] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.828113] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.828279] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.5: staged scaling request for 20x20->1920x1080 scaler_users = 0x20 <7> [130.828575] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.828808] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.829030] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.829243] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [130.829400] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [130.829574] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 571000 num active planes 1 <7> [130.829738] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [130.829960] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.830260] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:145 <7> [130.836342] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.836385] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:145:plane 6A] because [FB:638] is removed <7> [130.836407] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.5: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.836599] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.836761] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.836918] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.837073] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.837255] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.837509] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.837747] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.844778] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.844896] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.5: staged scaling request for 20x20->1920x1080 scaler_users = 0x20 <7> [130.845096] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.845283] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.845453] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.845608] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.845764] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.845936] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1 <7> [130.846100] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [130.846280] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.846486] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:145 <7> [130.853048] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.853092] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:145:plane 6A] because [FB:638] is removed <7> [130.853114] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.5: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.853360] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.853530] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.853687] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.853843] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.853998] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.854171] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.854359] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.861451] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.861571] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.5: staged scaling request for 20x20->1920x1080 scaler_users = 0x20 <7> [130.861779] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.861975] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.862161] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.862394] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.862672] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.862974] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1 <7> [130.863270] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [130.863551] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.863792] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:145 <7> [130.869723] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.869769] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:145:plane 6A] because [FB:638] is removed <7> [130.869790] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.5: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.869989] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.870150] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.870362] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.870597] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.870825] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.871119] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.871447] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.878314] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.878419] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.5: staged scaling request for 20x20->1920x1080 scaler_users = 0x20 <7> [130.878637] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.878821] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.878997] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.879167] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [130.879367] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [130.879577] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 571000 num active planes 1 <7> [130.879754] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [130.879967] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.880247] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:145 <7> [130.886410] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.886461] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:145:plane 6A] because [FB:638] is removed <7> [130.886484] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.5: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.886698] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.886878] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.887051] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.887243] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.887434] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.887619] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.887795] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.894991] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.895125] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.5: staged scaling request for 20x20->1920x1080 scaler_users = 0x20 <7> [130.895416] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.895713] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.895990] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.896288] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.896555] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.896769] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1 <7> [130.896969] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [130.897186] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.897579] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:145 <7> [130.903056] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.903101] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:145:plane 6A] because [FB:638] is removed <7> [130.903124] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.5: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.903372] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.903607] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.903836] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.904118] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.904425] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.904647] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.904856] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.911651] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.911773] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.5: staged scaling request for 20x20->1920x1080 scaler_users = 0x20 <7> [130.911993] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.912175] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.912380] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.912569] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.912737] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.912954] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1 <7> [130.913184] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [130.913445] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.913736] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:145 <7> [130.919740] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.919789] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:145:plane 6A] because [FB:638] is removed <7> [130.919812] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.5: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.920023] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.920200] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.920404] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.920590] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.920761] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.920950] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.921127] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.928333] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.928442] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.5: staged scaling request for 20x20->1920x1080 scaler_users = 0x20 <7> [130.928681] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.928879] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.929067] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.929274] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.929547] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.929934] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.5: staged scaling request for 20x20->1920x1080 scaler_users = 0x20 <7> [130.930232] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.930502] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.930720] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.930910] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.931104] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.931453] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.5: staged scaling request for 20x20->1920x1080 scaler_users = 0x20 <7> [130.931763] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.932051] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.932360] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.932640] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.932835] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.933041] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1 <7> [130.933282] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [130.933581] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.933947] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:145 <7> [130.936350] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.936390] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:145:plane 6A] because [FB:638] is removed <7> [130.936410] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.5: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.936594] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.936755] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.936911] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.937066] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.937233] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.937489] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.937733] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.944765] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.944895] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.6: staged scaling request for 20x20->1920x1080 scaler_users = 0x40 <7> [130.945091] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:155:plane 7A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.945280] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.945450] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.945606] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [130.945761] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [130.945988] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.6: staged scaling request for 20x20->1920x1080 scaler_users = 0x40 <7> [130.946153] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:155:plane 7A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.946326] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.946489] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.946641] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [130.946791] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [130.946998] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.6: staged scaling request for 20x20->1920x1080 scaler_users = 0x40 <7> [130.947161] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:155:plane 7A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.947332] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.947496] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.947650] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [130.947807] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [130.947970] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 571000 num active planes 1 <7> [130.948134] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [130.948312] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.948520] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:155 <7> [130.953071] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.953115] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:155:plane 7A] because [FB:638] is removed <7> [130.953135] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.953379] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:155:plane 7A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.953543] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.953702] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.953857] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.954012] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.954183] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.954371] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.961474] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.961593] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.6: staged scaling request for 20x20->1920x1080 scaler_users = 0x40 <7> [130.961797] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:155:plane 7A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.961962] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.962120] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.962306] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.962555] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.962809] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1 <7> [130.963049] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [130.963296] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.963498] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:155 <7> [130.965289] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [130.965283] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [130.965279] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [130.965355] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [130.965474] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [130.965652] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4 <7> [130.969723] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.969765] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:155:plane 7A] because [FB:638] is removed <7> [130.969787] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.970021] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:155:plane 7A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.970183] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.970363] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.970596] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.970827] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.971087] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.971351] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.978239] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.978336] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.6: staged scaling request for 20x20->1920x1080 scaler_users = 0x40 <7> [130.978537] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:155:plane 7A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.978702] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.978862] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.979020] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [130.979175] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [130.979399] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1 <7> [130.979580] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [130.979741] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.979933] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:155 <7> [130.986396] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [130.986441] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:155:plane 7A] because [FB:638] is removed <7> [130.986462] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [130.986661] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:155:plane 7A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [130.986825] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.986984] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.987141] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.987316] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.987514] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [130.987677] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [130.995043] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [130.995160] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.6: staged scaling request for 20x20->1920x1080 scaler_users = 0x40 <7> [130.995422] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:155:plane 7A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [130.995663] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [130.995891] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [130.996121] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [130.996359] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [130.996581] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 571000 num active planes 1 <7> [130.996745] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [130.996911] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [130.997119] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:155 <7> [131.003083] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [131.003133] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:155:plane 7A] because [FB:638] is removed <7> [131.003156] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.003439] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:155:plane 7A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.003713] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.003977] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.004250] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.004507] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.004709] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [131.004897] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.011712] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [131.011848] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.6: staged scaling request for 20x20->1920x1080 scaler_users = 0x40 <7> [131.012097] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:155:plane 7A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.012336] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.012554] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.012751] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.012947] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.013167] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1 <7> [131.013413] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [131.013633] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.013874] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:155 <7> [131.019699] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [131.019745] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:155:plane 7A] because [FB:638] is removed <7> [131.019767] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.019964] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:155:plane 7A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.020128] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.020307] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.020493] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.020651] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.020875] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [131.021092] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.028396] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [131.028498] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.6: staged scaling request for 20x20->1920x1080 scaler_users = 0x40 <7> [131.028714] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:155:plane 7A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.028895] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.029065] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.029276] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.029536] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.029818] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1 <7> [131.030159] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [131.030517] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.030833] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:155 <7> [131.036391] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [131.036439] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:155:plane 7A] because [FB:638] is removed <7> [131.036462] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.036665] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:155:plane 7A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.036839] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.037010] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.037179] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.037376] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.037655] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [131.037914] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.045090] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [131.045240] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.6: staged scaling request for 20x20->1920x1080 scaler_users = 0x40 <7> [131.045501] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:155:plane 7A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.045701] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.045893] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.046084] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.046300] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.046535] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1 <7> [131.046739] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [131.046935] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.047168] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:155 <7> [131.053097] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [131.053142] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:155:plane 7A] because [FB:638] is removed <7> [131.053164] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.053397] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:155:plane 7A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.053572] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.053730] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.053887] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.054073] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.054326] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0 <7> [131.054521] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <6> [131.061824] [IGT] kms_plane_scaling: finished subtest pipe-A, SUCCESS <6> [131.062604] [IGT] kms_plane_scaling: starting dynamic subtest pipe-B <7> [131.065196] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [131.065544] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [131.066248] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [131.066612] i915 0000:00:02.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6) <7> [131.067409] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [131.067757] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [131.068566] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [131.069557] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [131.069851] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [131.070542] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [131.070832] i915 0000:00:02.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6) <7> [131.071525] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [131.071801] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [131.072472] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [131.073345] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [131.073568] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [131.074181] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [131.074425] i915 0000:00:02.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6) <7> [131.075054] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [131.075279] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [131.075888] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [131.077406] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:638] <7> [131.079363] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:588:HDMI-A-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [131.079625] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24) <7> [131.079860] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:309:pipe B] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [131.080098] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:587:DDI B/PHY B] [CRTC:309:pipe B] <7> [131.080344] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [131.080584] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [131.080792] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [131.080953] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [131.081115] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000) <7> [131.081301] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [131.081501] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0) <7> [131.081732] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2080, found 0) <7> [131.081960] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0) <7> [131.082189] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2080, found 0) <7> [131.082444] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 1968, found 0) <7> [131.082613] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2000, found 0) <7> [131.082768] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0) <7> [131.082924] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0) <7> [131.083087] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1083, found 0) <7> [131.083328] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1088, found 0) <7> [131.083560] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1144, found 0) <7> [131.083792] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1144, found 0) <7> [131.084017] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0) <7> [131.084192] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2080, found 0) <7> [131.084366] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0) <7> [131.084520] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2080, found 0) <7> [131.084688] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 1968, found 0) <7> [131.084916] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2000, found 0) <7> [131.085146] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0) <7> [131.085470] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0) <7> [131.085695] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1083, found 0) <7> [131.085864] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1088, found 0) <7> [131.086022] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1144, found 0) <7> [131.086179] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1144, found 0) <7> [131.086374] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [131.086607] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0) <7> [131.086838] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0) <7> [131.087069] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in has_hdmi_sink (expected yes, found no) <7> [131.087311] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in has_infoframe (expected yes, found no) <7> [131.087482] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [131.087638] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 285500, found 0) <7> [131.087791] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 285500, found 0) <7> [131.087962] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in port_clock (expected 285500, found 0) <7> [131.088193] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in infoframes.enable (expected 0x00000071, found 0x00000000) <7> [131.088446] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in avi infoframe <7> [131.088678] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [131.088899] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [131.088903] i915 0000:00:02.0: colorspace: RGB <7> [131.088906] i915 0000:00:02.0: scan mode: Underscan <7> [131.088909] i915 0000:00:02.0: colorimetry: No Data <7> [131.088911] i915 0000:00:02.0: picture aspect: No Data <7> [131.088914] i915 0000:00:02.0: active aspect: Same as Picture <7> [131.088917] i915 0000:00:02.0: itc: No Data <7> [131.088920] i915 0000:00:02.0: extended colorimetry: xvYCC 601 <7> [131.088923] i915 0000:00:02.0: quantization range: Full <7> [131.088925] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling <7> [131.088928] i915 0000:00:02.0: video code: 0 <7> [131.088930] i915 0000:00:02.0: ycc quantization range: Full <7> [131.088933] i915 0000:00:02.0: hdmi content type: Graphics <7> [131.088936] i915 0000:00:02.0: pixel repeat: 0 <7> [131.088938] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0 <7> [131.088942] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [131.089121] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in spd infoframe <7> [131.089291] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [131.089445] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [131.089447] i915 0000:00:02.0: vendor: Intel <7> [131.089449] i915 0000:00:02.0: product: Integrated gfx <7> [131.089450] i915 0000:00:02.0: source device information: PC General (0x9) <7> [131.089452] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [131.089606] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hdmi infoframe <7> [131.089827] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [131.090055] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4 <7> [131.090059] i915 0000:00:02.0: empty frame <7> [131.090061] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [131.090303] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:171:pipe A] fastset requirement not met, forcing full modeset <7> [131.090529] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.enable (expected no, found yes) <7> [131.090761] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [131.090990] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in cpu_transcoder (expected -1, found 1) <7> [131.091183] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in lane_count (expected 0, found 4) <7> [131.091356] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040) <7> [131.091512] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [131.091666] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920) <7> [131.091863] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2080) <7> [131.092099] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920) <7> [131.092349] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2080) <7> [131.092580] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 1968) <7> [131.092798] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2000) <7> [131.092955] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080) <7> [131.093111] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080) <7> [131.093284] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1083) <7> [131.093488] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1088) <7> [131.093719] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1144) <7> [131.093947] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1144) <7> [131.094174] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920) <7> [131.094420] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2080) <7> [131.094608] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920) <7> [131.094763] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2080) <7> [131.094917] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1968) <7> [131.095072] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2000) <7> [131.095362] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080) <7> [131.095538] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080) <7> [131.095703] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1083) <7> [131.095865] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1088) <7> [131.096023] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1144) <7> [131.096181] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1144) <7> [131.096356] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [131.096514] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1) <7> [131.096672] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4) <7> [131.096827] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in has_hdmi_sink (expected no, found yes) <7> [131.096983] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in has_infoframe (expected no, found yes) <7> [131.097139] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [131.097306] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 285500) <7> [131.097463] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 285500) <7> [131.097618] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in port_clock (expected 0, found 285500) <7> [131.097773] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in infoframes.enable (expected 0x00000000, found 0x00000071) <7> [131.097928] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in avi infoframe <7> [131.098081] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [131.098241] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [131.098396] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [131.098398] i915 0000:00:02.0: colorspace: RGB <7> [131.098400] i915 0000:00:02.0: scan mode: Underscan <7> [131.098402] i915 0000:00:02.0: colorimetry: No Data <7> [131.098403] i915 0000:00:02.0: picture aspect: No Data <7> [131.098404] i915 0000:00:02.0: active aspect: Same as Picture <7> [131.098406] i915 0000:00:02.0: itc: No Data <7> [131.098408] i915 0000:00:02.0: extended colorimetry: xvYCC 601 <7> [131.098409] i915 0000:00:02.0: quantization range: Full <7> [131.098411] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling <7> [131.098412] i915 0000:00:02.0: video code: 0 <7> [131.098414] i915 0000:00:02.0: ycc quantization range: Full <7> [131.098415] i915 0000:00:02.0: hdmi content type: Graphics <7> [131.098416] i915 0000:00:02.0: pixel repeat: 0 <7> [131.098418] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0 <7> [131.098420] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in spd infoframe <7> [131.098574] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [131.098728] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [131.098881] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [131.098883] i915 0000:00:02.0: vendor: Intel <7> [131.098885] i915 0000:00:02.0: product: Integrated gfx <7> [131.098887] i915 0000:00:02.0: source device information: PC General (0x9) <7> [131.098888] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hdmi infoframe <7> [131.099042] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [131.099196] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [131.099364] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4 <7> [131.099366] i915 0000:00:02.0: empty frame <7> [131.099368] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:309:pipe B] fastset requirement not met, forcing full modeset <7> [131.099576] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:171:pipe A] releasing DPLL 0 <7> [131.099767] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: staged scaling request for 20x20->1920x1080 scaler_users = 0x100 <7> [131.099965] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:171:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x2 <7> [131.100134] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:309:pipe B] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x2 <7> [131.100313] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:165:cursor A] ddb (1993 - 2048) -> ( 0 - 0), size 55 -> 0 <7> [131.100470] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.100624] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:303:cursor B] ddb ( 0 - 0) -> (1993 - 2048), size 0 -> 55 <7> [131.100794] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.100974] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.101137] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [131.101307] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [131.101497] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 571000 num active planes 1 <7> [131.101660] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [131.101819] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.102032] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:171:pipe A] min cdclk: 192000 kHz -> 0 kHz <7> [131.102191] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:309:pipe B] min cdclk: 0 kHz -> 192000 kHz <7> [131.102395] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 35688 kHz -> 8922 kHz <7> [131.102567] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:309:pipe B] allocated DPLL 0 <7> [131.102730] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:309:pipe B] reserving DPLL 0 <7> [131.102892] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:173 <7> [131.103051] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:171:pipe A] enable: no [modeset] <7> [131.103267] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no <7> [131.103429] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7> [131.103596] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7> [131.103763] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7> [131.103920] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7> [131.104075] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:plane 6A] fb: [NOFB], visible: no <7> [131.104247] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:155:plane 7A] fb: [NOFB], visible: no <7> [131.104428] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:165:cursor A] fb: [NOFB], visible: no <7> [131.104590] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:309:pipe B] enable: yes [modeset] <7> [131.104745] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [131.104908] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: B, pipe bpp: 24, dithering: 0 <7> [131.105062] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [131.105216] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [131.105408] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [131.105575] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [131.105737] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 1, infoframes: 1, infoframes enabled: 0x71 <7> [131.105892] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] GCP: 0x0 <7> [131.106055] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [131.106057] i915 0000:00:02.0: colorspace: RGB <7> [131.106059] i915 0000:00:02.0: scan mode: Underscan <7> [131.106061] i915 0000:00:02.0: colorimetry: No Data <7> [131.106062] i915 0000:00:02.0: picture aspect: No Data <7> [131.106064] i915 0000:00:02.0: active aspect: Same as Picture <7> [131.106065] i915 0000:00:02.0: itc: No Data <7> [131.106067] i915 0000:00:02.0: extended colorimetry: xvYCC 601 <7> [131.106068] i915 0000:00:02.0: quantization range: Full <7> [131.106070] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling <7> [131.106072] i915 0000:00:02.0: video code: 0 <7> [131.106073] i915 0000:00:02.0: ycc quantization range: Full <7> [131.106075] i915 0000:00:02.0: hdmi content type: Graphics <7> [131.106076] i915 0000:00:02.0: pixel repeat: 0 <7> [131.106078] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0 <7> [131.106080] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [131.106082] i915 0000:00:02.0: vendor: Intel <7> [131.106083] i915 0000:00:02.0: product: Integrated gfx <7> [131.106085] i915 0000:00:02.0: source device information: PC General (0x9) <7> [131.106087] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4 <7> [131.106089] i915 0000:00:02.0: empty frame <7> [131.106090] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00 <7> [131.106253] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47 <7> [131.106406] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff <7> [131.106559] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03 00 <7> [131.106736] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2 <7> [131.106907] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [131.107071] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1144, vmax: 1144, flipline: 1144, pipeline full: 61, guardband: 63 vsync start: 0, vsync end: 0 <7> [131.107241] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1144, vmax vtotal: 1144 <7> [131.107410] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [131.107568] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5 <7> [131.107725] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5 <7> [131.107914] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5 <7> [131.108071] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x40 0x5 <7> [131.108247] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5 <7> [131.108410] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 285500, pipe src: 1920x1080+0+0, pixel rate 285500, min cdclk 192000 <7> [131.108565] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 59, ips linetime: 0 <7> [131.108720] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x100, scaler_id: -1, scaling_filter: 0 <7> [131.108875] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [131.109054] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [131.109236] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1801be, cfgcr1: 0x488, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [131.109402] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [131.109557] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [131.109722] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [131.109875] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [131.110029] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [131.110209] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [131.110386] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [131.110547] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [131.110701] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [131.110860] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [131.111013] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [131.111165] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [131.111368] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [131.111522] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:173:plane 1B] fb: [FB:638] 20x20 format = RG16 little-endian (0x36314752) modifier = 0x0, visible: yes <7> [131.111686] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: 0, scaling_filter: 0 <7> [131.111848] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 20.000000x20.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [131.112002] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:203:plane 2B] fb: [NOFB], visible: no <7> [131.112156] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:233:plane 3B] fb: [NOFB], visible: no <7> [131.112329] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:263:plane 4B] fb: [NOFB], visible: no <7> [131.112490] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:273:plane 5B] fb: [NOFB], visible: no <7> [131.112690] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:283:plane 6B] fb: [NOFB], visible: no <7> [131.112847] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:293:plane 7B] fb: [NOFB], visible: no <7> [131.113012] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:303:cursor B] fb: [NOFB], visible: no <7> [131.113447] i915 0000:00:02.0: [drm:intel_audio_codec_disable [i915]] [CONNECTOR:588:HDMI-A-1][ENCODER:587:DDI B/PHY B] Disable audio codec on [CRTC:171:pipe A] <7> [131.127972] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [131.132236] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:588:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10 <7> [131.132791] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [131.132945] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [131.133490] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [131.133650] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:588:HDMI-A-1] Failed to read TMDS config: -6 <7> [131.133666] i915 0000:00:02.0: [drm:intel_ddi_disable [i915]] [CONNECTOR:588:HDMI-A-1] Failed to reset sink scrambling/TMDS bit clock ratio <7> [131.133854] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [131.136918] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [131.137125] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:171:pipe A] <7> [131.137333] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [131.137513] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:587:DDI B/PHY B] <7> [131.137677] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:597:DDI TC1/PHY TC1] <7> [131.137857] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:599:DP-MST A] <7> [131.138032] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:600:DP-MST B] <7> [131.138198] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:601:DP-MST C] <7> [131.138381] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:602:DP-MST D] <7> [131.138549] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:607:DDI TC2/PHY TC2] <7> [131.138709] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:609:DP-MST A] <7> [131.138867] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:610:DP-MST B] <7> [131.139024] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:611:DP-MST C] <7> [131.139237] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:612:DP-MST D] <7> [131.139393] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:616:DDI TC3/PHY TC3] <7> [131.139557] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:618:DP-MST A] <7> [131.139722] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:619:DP-MST B] <7> [131.139877] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:620:DP-MST C] <7> [131.140032] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:621:DP-MST D] <7> [131.140188] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:625:DDI TC4/PHY TC4] <7> [131.140390] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:627:DP-MST A] <7> [131.140546] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:628:DP-MST B] <7> [131.140707] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:629:DP-MST C] <7> [131.140868] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:630:DP-MST D] <7> [131.141022] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:598:DP-1] <7> [131.141211] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:608:DP-2] <7> [131.141518] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:617:DP-3] <7> [131.141718] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:626:DP-4] <7> [131.142060] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x2, on? 0) for [CRTC:309:pipe B] <7> [131.142419] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [131.142655] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [131.142909] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe B <7> [131.143652] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:588:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10 <7> [131.144255] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [131.144404] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [131.144930] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [131.145115] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:588:HDMI-A-1] Failed to read TMDS config: -6 <7> [131.145131] i915 0000:00:02.0: [drm:intel_ddi_enable [i915]] [CONNECTOR:588:HDMI-A-1] Failed to configure sink scrambling/TMDS bit clock ratio <7> [131.153853] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:171:pipe A] <7> [131.154239] i915 0000:00:02.0: [drm:intel_audio_codec_enable [i915]] [CONNECTOR:588:HDMI-A-1][ENCODER:587:DDI B/PHY B] Enable audio codec on [CRTC:309:pipe B], 64 bytes ELD <7> [131.162170] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] HDMI audio pixel clock setting for 285500 not found, falling back to defaults <7> [131.162379] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] Configuring HDMI audio for pixel clock 25200 (0x00010000) <7> [131.162526] i915 0000:00:02.0: [drm:hsw_audio_config_update [i915]] using automatic N <6> [131.162677] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 5 not expected <6> [131.162680] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 0 not expected <6> [131.162681] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 10 not expected <6> [131.162683] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 6 not expected <7> [131.162815] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:588:HDMI-A-1] <7> [131.163051] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:309:pipe B] <7> [131.164517] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe B <7> [131.164730] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl <7> [131.164776] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:173:plane 1B] because [FB:638] is removed <7> [131.164802] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.164993] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.165151] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.165329] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.165516] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.165670] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.165847] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.166023] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.170802] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.170927] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: staged scaling request for 20x20->1920x1080 scaler_users = 0x100 <7> [131.171135] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.171324] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.171556] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.171789] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.172020] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.172362] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: staged scaling request for 20x20->1920x1080 scaler_users = 0x100 <7> [131.172607] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.172830] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.173051] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.173294] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.173521] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.173829] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: staged scaling request for 20x20->1920x1080 scaler_users = 0x100 <7> [131.174074] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.174317] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.174540] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.174770] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.174993] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.175238] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1 <7> [131.175476] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [131.175708] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.175998] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 8922 kHz -> 17844 kHz <7> [131.176245] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:173 <7> [131.176518] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x810 <7> [131.179012] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.179086] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:173:plane 1B] because [FB:639] is removed <7> [131.179120] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.179492] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.179735] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.179961] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.180188] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.180440] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.180696] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.180936] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.181374] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7> [131.181406] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7> [131.187390] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.187518] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: staged scaling request for 20x20->1920x1080 scaler_users = 0x100 <7> [131.187735] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.187902] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.188062] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.188234] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.188399] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.188574] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1 <7> [131.188738] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [131.188900] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.189093] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:173 <7> [131.195658] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.195704] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:173:plane 1B] because [FB:639] is removed <7> [131.195727] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.195929] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.196093] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.196267] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.196454] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.196609] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.196782] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.196946] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.204094] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.204210] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: staged scaling request for 20x20->1920x1080 scaler_users = 0x100 <7> [131.204449] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.204699] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.204932] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.205159] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 <7> [131.205413] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 <7> [131.205669] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 2284000 num active planes 1 <7> [131.205909] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 2284 <7> [131.206142] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.206452] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 17844 kHz -> 35688 kHz <7> [131.206693] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:173 <7> [131.212341] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.212388] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:173:plane 1B] because [FB:639] is removed <7> [131.212411] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.212615] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.212780] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.212937] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.213092] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.213274] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.213538] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.213778] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.220936] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.221058] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: staged scaling request for 20x20->1920x1080 scaler_users = 0x100 <7> [131.221276] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.221445] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.221603] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.221760] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [131.221915] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [131.222089] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 571000 num active planes 1 <7> [131.222271] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [131.222480] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.222673] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:173 <7> [131.228970] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.229014] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:173:plane 1B] because [FB:639] is removed <7> [131.229036] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.229257] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.229430] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.229588] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.229746] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.229901] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.230075] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.230268] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.237651] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.237769] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: staged scaling request for 20x20->1920x1080 scaler_users = 0x100 <7> [131.237966] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:173:plane 1B] using Y plane [PLANE:283:plane 6B] <7> [131.238160] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677 <7> [131.238347] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316 <7> [131.238590] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.238830] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.239070] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [131.239335] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [131.239573] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.239807] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.240044] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0 <7> [131.240279] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0 <7> [131.240536] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 856500 num active planes 2 <7> [131.240778] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 857 <7> [131.241021] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.241332] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:173 <7> [131.245609] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.245654] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:173:plane 1B] because [FB:639] is removed <7> [131.245682] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.245878] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 677) -> ( 0 - 0), size 677 -> 0 <7> [131.246041] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 677 - 1993) -> ( 0 - 0), size 1316 -> 0 <7> [131.246200] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.246389] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.246559] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.246712] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.246868] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.247022] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.247180] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.247366] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.247554] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.247719] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.254291] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.254406] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: staged scaling request for 20x20->1920x1080 scaler_users = 0x100 <7> [131.254596] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:173:plane 1B] using Y plane [PLANE:283:plane 6B] <7> [131.254783] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677 <7> [131.254947] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316 <7> [131.255105] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.255280] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.255437] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.255589] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.255744] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.255898] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.256082] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [131.256260] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [131.256445] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1713000 num active planes 2 <7> [131.256610] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1713 <7> [131.256770] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.256960] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:173 <7> [131.262432] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.262476] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:173:plane 1B] because [FB:639] is removed <7> [131.262502] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.262700] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 677) -> ( 0 - 0), size 677 -> 0 <7> [131.262866] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 677 - 1993) -> ( 0 - 0), size 1316 -> 0 <7> [131.263023] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.263180] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.263356] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.263512] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.263666] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.263819] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.263971] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.264124] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.264325] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.264493] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.270904] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.271021] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: staged scaling request for 20x20->1920x1080 scaler_users = 0x100 <7> [131.271258] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.271432] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.271588] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.271744] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.271898] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.272072] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1 <7> [131.272252] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [131.272425] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.272615] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:173 <7> [131.278926] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.278966] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:173:plane 1B] because [FB:639] is removed <7> [131.278987] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.279164] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.279352] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.279521] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.279678] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.279831] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.280042] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.280207] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.287578] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.287711] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: staged scaling request for 20x20->1920x1080 scaler_users = 0x100 <7> [131.287918] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.288085] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.288264] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.288438] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.288593] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.288813] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: staged scaling request for 20x20->1920x1080 scaler_users = 0x100 <7> [131.288991] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.289157] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.289329] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.289483] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.289639] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.289804] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1 <7> [131.289968] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [131.290128] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.290356] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:173 <7> [131.295674] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.295719] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:173:plane 1B] because [FB:639] is removed <7> [131.295741] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.295940] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.296105] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.296284] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.296443] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.296598] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.296771] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.296943] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.304325] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.304423] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: staged scaling request for 20x20->1920x1080 scaler_users = 0x100 <7> [131.304624] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.304792] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.304952] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.305109] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.305291] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.305542] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: staged scaling request for 20x20->1920x1080 scaler_users = 0x100 <7> [131.305707] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.305859] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.306025] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.306193] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.306402] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.306642] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: staged scaling request for 20x20->1920x1080 scaler_users = 0x100 <7> [131.306827] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.306999] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.307168] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.307364] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.307549] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.307728] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1 <7> [131.307911] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [131.308090] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.308338] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:173 <7> [131.312309] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.312353] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:173:plane 1B] because [FB:639] is removed <7> [131.312373] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.312566] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.312730] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.312888] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.313045] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.313200] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.313411] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.313584] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.320977] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.321088] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: staged scaling request for 20x20->1920x1080 scaler_users = 0x100 <7> [131.321305] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.321474] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.321633] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.321788] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 <7> [131.321943] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 <7> [131.322145] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 2284000 num active planes 1 <7> [131.322326] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 2284 <7> [131.322489] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.322682] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:173 <7> [131.328985] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.329025] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:173:plane 1B] because [FB:639] is removed <7> [131.329046] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.329241] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.329421] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.329578] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.329736] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.329890] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.330063] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.330236] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.337489] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.337620] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: staged scaling request for 20x20->1920x1080 scaler_users = 0x200 <7> [131.337824] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.337992] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.338152] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.338329] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [131.338501] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [131.338675] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 571000 num active planes 1 <7> [131.338840] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [131.339056] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.339346] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:203 <7> [131.345620] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.345665] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:203:plane 2B] because [FB:639] is removed <7> [131.345686] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.345882] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.346048] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.346208] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.346393] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.346552] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.346729] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.346897] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.354071] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.354201] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: staged scaling request for 20x20->1920x1080 scaler_users = 0x200 <7> [131.354478] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.354699] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.354886] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.355072] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.355285] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.355532] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1 <7> [131.355728] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [131.355921] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.356146] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:203 <7> [131.362307] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.362350] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:203:plane 2B] because [FB:639] is removed <7> [131.362371] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.362563] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.362725] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.362901] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.363106] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.363355] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.363606] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.363820] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.370797] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.370919] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: staged scaling request for 20x20->1920x1080 scaler_users = 0x200 <7> [131.371137] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.371336] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.371504] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.371670] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.371835] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.372096] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1 <7> [131.372365] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [131.372609] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.372876] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:203 <7> [131.378953] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.378999] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:203:plane 2B] because [FB:639] is removed <7> [131.379022] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.379246] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.379424] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.379593] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.379762] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.379968] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.380159] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.380356] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.387466] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.387605] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: staged scaling request for 20x20->1920x1080 scaler_users = 0x200 <7> [131.387852] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.388061] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.388282] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.388488] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 <7> [131.388686] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 <7> [131.388901] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 2284000 num active planes 1 <7> [131.389111] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 2284 <7> [131.389362] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.389608] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:203 <7> [131.395646] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.395699] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:203:plane 2B] because [FB:639] is removed <7> [131.395724] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.395955] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.396153] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.396375] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.396568] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.396758] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.396967] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.397172] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.404315] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.404418] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: staged scaling request for 20x20->1920x1080 scaler_users = 0x200 <7> [131.404632] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.404830] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.405055] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.405299] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [131.405526] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [131.405768] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 571000 num active planes 1 <7> [131.405999] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [131.406273] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.406583] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:203 <7> [131.412298] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.412343] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:203:plane 2B] because [FB:639] is removed <7> [131.412364] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.412560] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.412724] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.412884] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.413043] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.413201] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.413401] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.413565] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.421000] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.421142] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: staged scaling request for 20x20->1920x1080 scaler_users = 0x200 <7> [131.421376] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:203:plane 2B] using Y plane [PLANE:283:plane 6B] <7> [131.421587] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677 <7> [131.421771] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316 <7> [131.421944] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.422118] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.422311] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [131.422489] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [131.422660] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.422829] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.423008] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0 <7> [131.423194] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0 <7> [131.423541] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: staged scaling request for 20x20->1920x1080 scaler_users = 0x200 <7> [131.423740] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:203:plane 2B] using Y plane [PLANE:283:plane 6B] <7> [131.423950] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677 <7> [131.424138] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316 <7> [131.424350] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.424539] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.424729] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [131.424915] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [131.425100] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.425299] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.425489] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0 <7> [131.425675] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0 <7> [131.425833] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 856500 num active planes 2 <7> [131.425996] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 857 <7> [131.426156] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.426363] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:203 <7> [131.428972] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.429014] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:203:plane 2B] because [FB:639] is removed <7> [131.429039] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.429265] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 677) -> ( 0 - 0), size 677 -> 0 <7> [131.429434] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 677 - 1993) -> ( 0 - 0), size 1316 -> 0 <7> [131.429590] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.429745] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.429921] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.430077] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.430244] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.430396] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.430549] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.430702] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.430880] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.431043] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.437563] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.437672] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: staged scaling request for 20x20->1920x1080 scaler_users = 0x200 <7> [131.437864] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:203:plane 2B] using Y plane [PLANE:283:plane 6B] <7> [131.438052] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677 <7> [131.438215] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316 <7> [131.438393] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.438563] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.438719] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.438874] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.439028] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.439205] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.439404] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [131.439572] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [131.439814] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: staged scaling request for 20x20->1920x1080 scaler_users = 0x200 <7> [131.439979] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:203:plane 2B] using Y plane [PLANE:283:plane 6B] <7> [131.440152] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677 <7> [131.440322] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316 <7> [131.440497] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.440661] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.440823] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.440975] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.441135] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.441305] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.441457] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [131.441609] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [131.441858] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: staged scaling request for 20x20->1920x1080 scaler_users = 0x200 <7> [131.442022] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:203:plane 2B] using Y plane [PLANE:283:plane 6B] <7> [131.442205] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677 <7> [131.442387] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316 <7> [131.442542] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.442695] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.442852] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.443033] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.443190] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.443380] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.443541] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [131.443692] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [131.443850] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1713000 num active planes 2 <7> [131.444036] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1713 <7> [131.444204] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.444427] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:203 <7> [131.445646] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.445689] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:203:plane 2B] because [FB:639] is removed <7> [131.445714] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.445918] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 677) -> ( 0 - 0), size 677 -> 0 <7> [131.446078] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 677 - 1993) -> ( 0 - 0), size 1316 -> 0 <7> [131.446251] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.446440] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.446597] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.446758] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.446918] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.447071] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.447234] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.447388] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.447595] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.447762] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.454249] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.454366] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: staged scaling request for 20x20->1920x1080 scaler_users = 0x200 <7> [131.454569] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.454739] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.454898] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.455057] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.455215] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.455438] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1 <7> [131.455631] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [131.455792] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.455998] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:203 <7> [131.462351] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.462397] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:203:plane 2B] because [FB:639] is removed <7> [131.462418] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.462614] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.462779] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.462938] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.463096] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.463274] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.463494] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.463657] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.470946] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.471059] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: staged scaling request for 20x20->1920x1080 scaler_users = 0x200 <7> [131.471284] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.471455] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.471611] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.471768] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.471966] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.472140] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1 <7> [131.472329] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [131.472499] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.472693] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:203 <7> [131.478955] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.478995] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:203:plane 2B] because [FB:639] is removed <7> [131.479015] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.479194] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.479382] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.479538] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.479694] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.479850] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.480059] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.480236] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.487605] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.487723] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: staged scaling request for 20x20->1920x1080 scaler_users = 0x200 <7> [131.487927] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.488094] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.488285] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.488489] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.488644] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.488820] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1 <7> [131.488984] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [131.489144] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.489379] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:203 <7> [131.495703] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.495747] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:203:plane 2B] because [FB:639] is removed <7> [131.495770] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.495966] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.496132] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.496338] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.496545] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.496700] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.496872] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.497039] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.504393] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.504514] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: staged scaling request for 20x20->1920x1080 scaler_users = 0x200 <7> [131.504747] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.504937] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.505120] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.505319] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 <7> [131.505505] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 <7> [131.505705] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 2284000 num active planes 1 <7> [131.505895] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 2284 <7> [131.506118] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.506370] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:203 <7> [131.512319] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.512362] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:203:plane 2B] because [FB:639] is removed <7> [131.512384] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.512573] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.512734] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.512900] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.513091] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.513341] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.513552] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.513752] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.520797] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.520939] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: staged scaling request for 20x20->1920x1080 scaler_users = 0x400 <7> [131.521153] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.521359] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.521549] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.521714] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [131.521906] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [131.522146] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 571000 num active planes 1 <7> [131.522407] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [131.522658] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.522918] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:233 <7> [131.529006] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.529055] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:233:plane 3B] because [FB:639] is removed <7> [131.529079] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.529335] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.529546] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.529722] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.529896] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.530071] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.530283] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.530495] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.537419] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.537553] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: staged scaling request for 20x20->1920x1080 scaler_users = 0x400 <7> [131.537792] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.537990] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.538186] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.538409] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.538601] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.538812] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1 <7> [131.539013] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [131.539261] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.539508] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:233 <7> [131.545624] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.545668] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:233:plane 3B] because [FB:639] is removed <7> [131.545689] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.545910] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.546108] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.546327] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.546518] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.546706] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.546914] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.547114] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.554046] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.554182] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: staged scaling request for 20x20->1920x1080 scaler_users = 0x400 <7> [131.554417] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.554614] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.554778] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.554983] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.555186] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.555532] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: staged scaling request for 20x20->1920x1080 scaler_users = 0x400 <7> [131.555756] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.555958] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.556159] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.556384] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.556625] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.556834] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1 <7> [131.557049] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [131.557272] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.557560] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:233 <7> [131.562322] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.562365] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:233:plane 3B] because [FB:639] is removed <7> [131.562385] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.562577] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.562738] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.562893] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.563049] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.563202] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.563399] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.563590] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.570753] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.570871] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: staged scaling request for 20x20->1920x1080 scaler_users = 0x400 <7> [131.571076] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.571261] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.571422] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.571580] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 <7> [131.571734] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 <7> [131.571949] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: staged scaling request for 20x20->1920x1080 scaler_users = 0x400 <7> [131.572169] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.572346] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.572510] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.572674] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 <7> [131.572826] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 <7> [131.573026] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: staged scaling request for 20x20->1920x1080 scaler_users = 0x400 <7> [131.573193] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.573403] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.573559] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.573723] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 <7> [131.573884] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 <7> [131.574047] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 2284000 num active planes 1 <7> [131.574209] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 2284 <7> [131.574395] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.574619] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:233 <7> [131.578977] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.579019] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:233:plane 3B] because [FB:639] is removed <7> [131.579038] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.579237] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.579398] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.579554] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.579710] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.579898] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.580079] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.580260] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.587630] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.587748] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: staged scaling request for 20x20->1920x1080 scaler_users = 0x400 <7> [131.587955] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.588124] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.588304] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.588503] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [131.588659] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [131.588835] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 571000 num active planes 1 <7> [131.588998] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [131.589158] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.589381] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:233 <7> [131.595666] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.595712] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:233:plane 3B] because [FB:639] is removed <7> [131.595735] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.595936] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.596097] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.596272] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.596464] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.596620] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.596793] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.596957] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.604253] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.604358] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: staged scaling request for 20x20->1920x1080 scaler_users = 0x400 <7> [131.604542] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:233:plane 3B] using Y plane [PLANE:283:plane 6B] <7> [131.604719] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677 <7> [131.604873] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316 <7> [131.605026] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.605176] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.605357] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [131.605533] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [131.605688] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.605849] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.606036] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0 <7> [131.606256] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0 <7> [131.606513] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 856500 num active planes 2 <7> [131.606727] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 857 <7> [131.606939] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.607174] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:233 <7> [131.612342] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.612386] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:233:plane 3B] because [FB:639] is removed <7> [131.612411] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.612605] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 677) -> ( 0 - 0), size 677 -> 0 <7> [131.612767] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 677 - 1993) -> ( 0 - 0), size 1316 -> 0 <7> [131.612924] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.613080] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.613246] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.613402] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.613555] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.613708] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.613861] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.614014] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.614243] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.614407] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.620903] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.621025] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: staged scaling request for 20x20->1920x1080 scaler_users = 0x400 <7> [131.621217] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:233:plane 3B] using Y plane [PLANE:283:plane 6B] <7> [131.621434] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677 <7> [131.621616] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316 <7> [131.621775] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.621929] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.622085] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.622250] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.622426] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.622579] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.622731] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [131.622884] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [131.623059] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1713000 num active planes 2 <7> [131.623233] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1713 <7> [131.623427] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.623621] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:233 <7> [131.629001] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.629045] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:233:plane 3B] because [FB:639] is removed <7> [131.629071] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.629297] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 677) -> ( 0 - 0), size 677 -> 0 <7> [131.629471] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 677 - 1993) -> ( 0 - 0), size 1316 -> 0 <7> [131.629628] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.629781] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.629938] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.630091] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.630254] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.630435] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.630592] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.630747] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.630918] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.631082] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.637583] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.637699] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: staged scaling request for 20x20->1920x1080 scaler_users = 0x400 <7> [131.637904] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.638069] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.638246] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.638409] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.638563] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.638736] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1 <7> [131.638924] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [131.639105] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.639339] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:233 <7> [131.645649] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.645693] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:233:plane 3B] because [FB:639] is removed <7> [131.645713] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.645907] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.646069] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.646236] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.646393] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.646548] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.646721] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.646882] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.654313] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.654410] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: staged scaling request for 20x20->1920x1080 scaler_users = 0x400 <7> [131.654616] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.654782] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.654943] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.655100] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.655276] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.655490] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1 <7> [131.655656] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [131.655818] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.656011] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:233 <7> [131.662380] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.662422] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:233:plane 3B] because [FB:639] is removed <7> [131.662442] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.662623] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.662785] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.662950] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.663114] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.663310] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.663493] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.663667] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.671043] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.671160] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: staged scaling request for 20x20->1920x1080 scaler_users = 0x400 <7> [131.671413] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.671581] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.671739] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.671926] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.672176] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.672436] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1 <7> [131.672654] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [131.672858] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.673100] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:233 <7> [131.678997] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.679043] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:233:plane 3B] because [FB:639] is removed <7> [131.679064] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.679294] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.679471] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.679641] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.679810] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.680020] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.680217] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.680422] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.687762] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.687919] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: staged scaling request for 20x20->1920x1080 scaler_users = 0x400 <7> [131.688169] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.688407] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.688610] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.688807] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 <7> [131.689006] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 <7> [131.689326] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: staged scaling request for 20x20->1920x1080 scaler_users = 0x400 <7> [131.689551] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.689748] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.689946] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.690152] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 <7> [131.690385] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 <7> [131.690604] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 2284000 num active planes 1 <7> [131.690825] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 2284 <7> [131.691044] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.691315] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:233 <7> [131.695742] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.695796] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:233:plane 3B] because [FB:639] is removed <7> [131.695817] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.696014] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.696177] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.696359] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.696517] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.696672] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.696843] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.697007] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.704153] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.704302] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: staged scaling request for 20x20->1920x1080 scaler_users = 0x800 <7> [131.704509] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.704675] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.704835] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.705039] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [131.705214] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [131.705513] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: staged scaling request for 20x20->1920x1080 scaler_users = 0x800 <7> [131.705702] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.705874] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.706044] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.706213] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [131.706456] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [131.706704] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: staged scaling request for 20x20->1920x1080 scaler_users = 0x800 <7> [131.706884] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.707063] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.707236] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.707405] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [131.707570] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [131.707784] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 571000 num active planes 1 <7> [131.707961] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [131.708121] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.708336] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:263 <7> [131.712353] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.712395] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:263:plane 4B] because [FB:639] is removed <7> [131.712416] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.712606] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.712765] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.712921] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.713074] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.713240] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.713414] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.713577] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.720765] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.720878] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: staged scaling request for 20x20->1920x1080 scaler_users = 0x800 <7> [131.721067] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.721220] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.721415] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.721574] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.721727] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.721901] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1 <7> [131.722065] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [131.722235] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.722449] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:263 <7> [131.729079] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.729124] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:263:plane 4B] because [FB:639] is removed <7> [131.729145] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.729378] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.729541] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.729699] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.729855] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.730010] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.730181] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.730371] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.737515] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.737626] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: staged scaling request for 20x20->1920x1080 scaler_users = 0x800 <7> [131.737819] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.738012] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.738197] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.738427] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.738610] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.738812] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1 <7> [131.739000] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [131.739238] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.739475] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:263 <7> [131.745667] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.745709] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:263:plane 4B] because [FB:639] is removed <7> [131.745730] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.745926] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.746088] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.746273] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.746429] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.746585] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.746755] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.746981] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.754399] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.754526] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: staged scaling request for 20x20->1920x1080 scaler_users = 0x800 <7> [131.754749] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.754935] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.755117] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.755317] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [131.755492] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [131.755683] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 571000 num active planes 1 <7> [131.755867] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [131.756090] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.756444] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:263 <7> [131.762422] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.762471] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:263:plane 4B] because [FB:639] is removed <7> [131.762496] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.762715] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.762899] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.763076] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.763264] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.763447] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.763639] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.763822] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.770983] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.771115] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: staged scaling request for 20x20->1920x1080 scaler_users = 0x800 <7> [131.771398] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:263:plane 4B] using Y plane [PLANE:283:plane 6B] <7> [131.771632] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677 <7> [131.771834] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316 <7> [131.772032] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.772296] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.772508] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [131.772713] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [131.772914] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.773114] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.773336] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0 <7> [131.773536] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0 <7> [131.773806] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 856500 num active planes 2 <7> [131.774026] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 857 <7> [131.774219] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.774476] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:263 <7> [131.779005] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.779048] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:263:plane 4B] because [FB:639] is removed <7> [131.779074] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.779282] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 677) -> ( 0 - 0), size 677 -> 0 <7> [131.779445] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 677 - 1993) -> ( 0 - 0), size 1316 -> 0 <7> [131.779604] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.779759] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.779949] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.780102] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.780277] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.780437] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.780589] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.780740] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.780911] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.781087] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.787670] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.787767] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: staged scaling request for 20x20->1920x1080 scaler_users = 0x800 <7> [131.787957] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:263:plane 4B] using Y plane [PLANE:283:plane 6B] <7> [131.788142] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677 <7> [131.788358] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316 <7> [131.788517] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.788672] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.788827] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.788992] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.789173] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.789348] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.789508] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [131.789676] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [131.789852] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1713000 num active planes 2 <7> [131.790017] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1713 <7> [131.790177] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.790436] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:263 <7> [131.795688] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.795732] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:263:plane 4B] because [FB:639] is removed <7> [131.795758] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.795950] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 677) -> ( 0 - 0), size 677 -> 0 <7> [131.796106] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 677 - 1993) -> ( 0 - 0), size 1316 -> 0 <7> [131.796310] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.796465] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.796620] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.796773] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.796938] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.797125] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.797304] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.797460] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.797644] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.797807] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.804326] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.804444] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: staged scaling request for 20x20->1920x1080 scaler_users = 0x800 <7> [131.804647] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.804815] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.804977] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.805135] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.805315] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.805506] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1 <7> [131.805671] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [131.805830] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.806021] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:263 <7> [131.812379] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.812424] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:263:plane 4B] because [FB:639] is removed <7> [131.812446] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.812647] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.812813] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.812971] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.813126] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.813312] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.813502] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.813666] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.821066] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.821194] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: staged scaling request for 20x20->1920x1080 scaler_users = 0x800 <7> [131.821441] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.821613] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.821772] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.821930] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.822147] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.822443] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: staged scaling request for 20x20->1920x1080 scaler_users = 0x800 <7> [131.822642] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.822829] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.823005] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.823180] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.823400] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.823607] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1 <7> [131.823806] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [131.824003] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.824222] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:263 <7> [131.829017] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.829059] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:263:plane 4B] because [FB:639] is removed <7> [131.829080] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.829326] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.829490] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.829647] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.829810] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.829994] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.830176] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.830355] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.837667] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.837761] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: staged scaling request for 20x20->1920x1080 scaler_users = 0x800 <7> [131.837955] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.838112] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.838295] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.838453] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.838607] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.838820] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: staged scaling request for 20x20->1920x1080 scaler_users = 0x800 <7> [131.839027] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.839181] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.839359] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.839521] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.839673] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.839884] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: staged scaling request for 20x20->1920x1080 scaler_users = 0x800 <7> [131.840057] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.840222] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.840443] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.840610] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.840781] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.840964] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1 <7> [131.841135] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [131.841354] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.841584] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:263 <7> [131.845687] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.845729] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:263:plane 4B] because [FB:639] is removed <7> [131.845748] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.845938] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.846097] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.846275] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.846433] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.846588] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.846761] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.846941] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.854172] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.854304] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: staged scaling request for 20x20->1920x1080 scaler_users = 0x1000 <7> [131.854510] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.854674] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.854831] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.854987] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [131.855141] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [131.855385] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: staged scaling request for 20x20->1920x1080 scaler_users = 0x1000 <7> [131.855557] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.855715] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.855871] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.856026] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [131.856178] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [131.856425] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: staged scaling request for 20x20->1920x1080 scaler_users = 0x1000 <7> [131.856591] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.856744] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.856893] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.857050] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [131.857219] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [131.857398] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 571000 num active planes 1 <7> [131.857560] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [131.857719] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.857915] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:273 <7> [131.862390] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.862435] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:273:plane 5B] because [FB:639] is removed <7> [131.862456] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.862648] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.862811] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.862966] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.863122] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.863304] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.863475] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.863639] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.870823] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.870932] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: staged scaling request for 20x20->1920x1080 scaler_users = 0x1000 <7> [131.871122] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.871313] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.871473] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.871631] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.871786] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.872000] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1 <7> [131.872168] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [131.872355] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.872559] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:273 <7> [131.879028] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.879069] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:273:plane 5B] because [FB:639] is removed <7> [131.879091] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.879349] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.879514] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.879668] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.879824] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.880013] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.880188] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.880378] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.887554] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.887676] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: staged scaling request for 20x20->1920x1080 scaler_users = 0x1000 <7> [131.887882] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.888061] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.888245] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.888424] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.888591] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.888777] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1 <7> [131.888954] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [131.889128] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.889375] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:273 <7> [131.895749] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.895792] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:273:plane 5B] because [FB:639] is removed <7> [131.895814] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.896010] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.896170] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.896350] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.896508] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.896662] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.896833] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.897007] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.904418] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.904523] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: staged scaling request for 20x20->1920x1080 scaler_users = 0x1000 <7> [131.904750] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.904937] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.905112] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.905311] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [131.905497] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [131.905691] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 571000 num active planes 1 <7> [131.905875] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [131.906104] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.906440] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:273 <7> [131.912384] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.912433] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:273:plane 5B] because [FB:639] is removed <7> [131.912456] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.912671] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.912850] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.913024] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.913197] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.913398] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.913590] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.913771] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.921122] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.921276] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: staged scaling request for 20x20->1920x1080 scaler_users = 0x1000 <7> [131.921516] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:273:plane 5B] using Y plane [PLANE:283:plane 6B] <7> [131.921749] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677 <7> [131.921952] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316 <7> [131.922151] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.922370] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.922569] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [131.922763] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [131.922960] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.923154] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.923391] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0 <7> [131.923590] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0 <7> [131.923816] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 856500 num active planes 2 <7> [131.924040] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 857 <7> [131.924272] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.924534] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:273 <7> [131.929066] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.929111] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:273:plane 5B] because [FB:639] is removed <7> [131.929141] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.929366] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 677) -> ( 0 - 0), size 677 -> 0 <7> [131.929528] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 677 - 1993) -> ( 0 - 0), size 1316 -> 0 <7> [131.929686] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.929840] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.929994] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.930147] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.930315] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.930468] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.930619] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.930771] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.930940] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.931102] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.937717] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.937832] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: staged scaling request for 20x20->1920x1080 scaler_users = 0x1000 <7> [131.938025] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:273:plane 5B] using Y plane [PLANE:283:plane 6B] <7> [131.938216] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677 <7> [131.938398] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316 <7> [131.938574] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.938731] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.938887] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.939057] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.939260] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.939428] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.939586] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [131.939748] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [131.939922] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1713000 num active planes 2 <7> [131.940085] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1713 <7> [131.940287] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.940486] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:273 <7> [131.945710] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.945754] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:273:plane 5B] because [FB:639] is removed <7> [131.945781] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.945980] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 677) -> ( 0 - 0), size 677 -> 0 <7> [131.946143] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 677 - 1993) -> ( 0 - 0), size 1316 -> 0 <7> [131.946320] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.946476] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.946632] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.946787] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.946966] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.947127] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.947302] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.947455] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.947634] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.947797] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.954352] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.954482] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: staged scaling request for 20x20->1920x1080 scaler_users = 0x1000 <7> [131.954685] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.954853] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.955010] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.955166] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.955347] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.955572] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: staged scaling request for 20x20->1920x1080 scaler_users = 0x1000 <7> [131.955740] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.955894] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.956047] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.956225] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.956413] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.956579] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1 <7> [131.956743] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [131.956905] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.957098] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:273 <7> [131.962403] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.962443] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:273:plane 5B] because [FB:639] is removed <7> [131.962463] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.962641] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.962788] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.962930] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.963070] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.963210] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.963412] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.963576] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.971118] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.971246] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: staged scaling request for 20x20->1920x1080 scaler_users = 0x1000 <7> [131.971454] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.971618] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.971774] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.971971] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.972126] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.972390] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: staged scaling request for 20x20->1920x1080 scaler_users = 0x1000 <7> [131.972563] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.972717] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.972869] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.973038] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.973209] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.973438] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: staged scaling request for 20x20->1920x1080 scaler_users = 0x1000 <7> [131.973609] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.973764] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.973920] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.974076] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.974244] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.974452] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1 <7> [131.974616] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [131.974784] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.974986] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:273 <7> [131.979030] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.979073] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:273:plane 5B] because [FB:639] is removed <7> [131.979093] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.979307] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.979470] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.979629] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.979786] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.979976] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.980156] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.980342] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [131.987709] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [131.987826] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: staged scaling request for 20x20->1920x1080 scaler_users = 0x1000 <7> [131.988031] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [131.988197] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [131.988381] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [131.988561] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [131.988717] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [131.988891] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1 <7> [131.989055] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [131.989217] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [131.989461] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:273 <7> [131.995729] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [131.995773] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:273:plane 5B] because [FB:639] is removed <7> [131.995795] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: Staged freeing scaler id 0 scaler_users = 0x0 <7> [131.995986] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [131.996151] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [131.996329] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.996501] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.996657] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [131.996827] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [131.996991] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [132.004186] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [132.004327] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.13: staged scaling request for 20x20->1920x1080 scaler_users = 0x2000 <7> [132.004531] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.004697] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.004864] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.005071] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [132.005276] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [132.005480] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 571000 num active planes 1 <7> [132.005665] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [132.005844] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [132.006058] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:283 <7> [132.012401] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [132.012443] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:283:plane 6B] because [FB:639] is removed <7> [132.012465] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.13: Staged freeing scaler id 0 scaler_users = 0x0 <7> [132.012660] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [132.012821] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [132.012979] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.013137] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.013318] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.013508] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [132.013671] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [132.020851] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [132.020983] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.13: staged scaling request for 20x20->1920x1080 scaler_users = 0x2000 <7> [132.021204] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.021418] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.021599] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.021776] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [132.021950] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [132.022144] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1 <7> [132.022367] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [132.022552] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [132.022775] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:283 <7> [132.029118] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [132.029171] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:283:plane 6B] because [FB:639] is removed <7> [132.029196] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.13: Staged freeing scaler id 0 scaler_users = 0x0 <7> [132.029464] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [132.029666] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [132.029858] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.030049] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.030249] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.030488] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [132.030691] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [132.037541] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [132.037660] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.13: staged scaling request for 20x20->1920x1080 scaler_users = 0x2000 <7> [132.037875] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.038098] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.038343] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.038556] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [132.038765] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [132.038999] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1 <7> [132.039274] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [132.039508] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [132.039789] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:283 <7> [132.045707] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [132.045752] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:283:plane 6B] because [FB:639] is removed <7> [132.045772] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.13: Staged freeing scaler id 0 scaler_users = 0x0 <7> [132.045967] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [132.046133] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [132.046313] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.046477] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.046638] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.046822] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [132.047003] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [132.054381] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [132.054500] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.13: staged scaling request for 20x20->1920x1080 scaler_users = 0x2000 <7> [132.054711] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.054884] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.055047] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.055209] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [132.055390] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [132.055568] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 571000 num active planes 1 <7> [132.055735] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [132.055941] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [132.056204] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:283 <7> [132.062433] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [132.062481] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:283:plane 6B] because [FB:639] is removed <7> [132.062505] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.13: Staged freeing scaler id 0 scaler_users = 0x0 <7> [132.062720] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [132.062905] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [132.063076] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.063269] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.063444] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.063629] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [132.063809] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [132.071055] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [132.071185] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.13: staged scaling request for 20x20->1920x1080 scaler_users = 0x2000 <7> [132.071485] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.071698] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.071897] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.072096] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [132.072370] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [132.072606] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1 <7> [132.072830] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [132.073036] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [132.073293] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:283 <7> [132.079051] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [132.079095] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:283:plane 6B] because [FB:639] is removed <7> [132.079117] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.13: Staged freeing scaler id 0 scaler_users = 0x0 <7> [132.079350] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [132.079513] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [132.079678] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.079881] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.080101] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.080397] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [132.080627] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [132.087763] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [132.087908] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.13: staged scaling request for 20x20->1920x1080 scaler_users = 0x2000 <7> [132.088135] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.088350] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.088530] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.088705] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [132.088903] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [132.089217] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.13: staged scaling request for 20x20->1920x1080 scaler_users = 0x2000 <7> [132.089515] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.089744] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.089968] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.090193] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [132.090442] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [132.090710] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1 <7> [132.090948] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [132.091186] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [132.091492] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:283 <7> [132.095784] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [132.095828] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:283:plane 6B] because [FB:639] is removed <7> [132.095850] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.13: Staged freeing scaler id 0 scaler_users = 0x0 <7> [132.096044] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [132.096207] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [132.096391] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.096548] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.096704] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.096874] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [132.097038] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [132.104417] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [132.104514] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.13: staged scaling request for 20x20->1920x1080 scaler_users = 0x2000 <7> [132.104717] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.104884] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.105043] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.105199] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [132.105383] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [132.105604] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.13: staged scaling request for 20x20->1920x1080 scaler_users = 0x2000 <7> [132.105773] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.105930] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.106083] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.106303] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [132.106463] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [132.106675] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.13: staged scaling request for 20x20->1920x1080 scaler_users = 0x2000 <7> [132.106859] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.107025] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.107194] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.107388] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [132.107573] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [132.107774] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1 <7> [132.107963] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [132.108142] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [132.108374] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:283 <7> [132.112435] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [132.112477] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:283:plane 6B] because [FB:639] is removed <7> [132.112498] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.13: Staged freeing scaler id 0 scaler_users = 0x0 <7> [132.112685] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [132.112848] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [132.113006] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.113162] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.113337] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.113511] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [132.113677] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [132.120886] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [132.121021] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.14: staged scaling request for 20x20->1920x1080 scaler_users = 0x4000 <7> [132.121222] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:293:plane 7B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.121416] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.121586] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.121743] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [132.121898] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [132.122124] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.14: staged scaling request for 20x20->1920x1080 scaler_users = 0x4000 <7> [132.122320] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:293:plane 7B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.122474] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.122625] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.122777] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [132.122929] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [132.123140] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.14: staged scaling request for 20x20->1920x1080 scaler_users = 0x4000 <7> [132.123329] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:293:plane 7B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.123488] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.123639] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.123791] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [132.123949] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [132.124113] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 571000 num active planes 1 <7> [132.124294] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [132.124454] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [132.124646] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:293 <7> [132.129136] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [132.129180] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:293:plane 7B] because [FB:639] is removed <7> [132.129201] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.14: Staged freeing scaler id 0 scaler_users = 0x0 <7> [132.129415] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:293:plane 7B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [132.129581] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [132.129736] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.129892] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.130069] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.130251] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [132.130414] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [132.137543] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [132.137658] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.14: staged scaling request for 20x20->1920x1080 scaler_users = 0x4000 <7> [132.137862] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:293:plane 7B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.138029] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.138188] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.138367] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [132.138542] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [132.138716] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1 <7> [132.138879] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [132.139048] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [132.139292] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:293 <7> [132.145735] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [132.145780] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:293:plane 7B] because [FB:639] is removed <7> [132.145802] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.14: Staged freeing scaler id 0 scaler_users = 0x0 <7> [132.146000] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:293:plane 7B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [132.146165] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [132.146345] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.146519] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.146673] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.146845] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [132.147011] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [132.154178] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [132.154312] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.14: staged scaling request for 20x20->1920x1080 scaler_users = 0x4000 <7> [132.154517] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:293:plane 7B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.154681] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.154838] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.155007] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [132.155184] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [132.155411] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1 <7> [132.155601] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [132.155786] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [132.156010] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:293 <7> [132.162513] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [132.162559] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:293:plane 7B] because [FB:639] is removed <7> [132.162581] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.14: Staged freeing scaler id 0 scaler_users = 0x0 <7> [132.162785] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:293:plane 7B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [132.162948] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [132.163105] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.163281] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.163439] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.163613] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [132.163777] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [132.171089] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [132.171216] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.14: staged scaling request for 20x20->1920x1080 scaler_users = 0x4000 <7> [132.171488] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:293:plane 7B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.171678] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.171854] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.172033] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [132.172261] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [132.172468] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 571000 num active planes 1 <7> [132.172661] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [132.172853] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [132.173093] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:293 <7> [132.179087] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [132.179137] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:293:plane 7B] because [FB:639] is removed <7> [132.179161] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.14: Staged freeing scaler id 0 scaler_users = 0x0 <7> [132.179493] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:293:plane 7B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [132.179692] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [132.179885] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.180085] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.180327] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.180551] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [132.180760] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [132.187817] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [132.187962] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.14: staged scaling request for 20x20->1920x1080 scaler_users = 0x4000 <7> [132.188226] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:293:plane 7B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.188485] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.188701] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.188911] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [132.189120] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [132.189399] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1 <7> [132.189621] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [132.189837] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [132.190093] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:293 <7> [132.195765] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [132.195811] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:293:plane 7B] because [FB:639] is removed <7> [132.195832] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.14: Staged freeing scaler id 0 scaler_users = 0x0 <7> [132.196032] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:293:plane 7B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [132.196203] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [132.196406] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.196570] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.196731] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.196909] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [132.197125] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [132.204453] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [132.204565] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.14: staged scaling request for 20x20->1920x1080 scaler_users = 0x4000 <7> [132.204797] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:293:plane 7B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.204988] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.205172] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.205384] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [132.205567] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [132.205767] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1 <7> [132.205959] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [132.206204] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [132.206618] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:293 <7> [132.212459] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [132.212506] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:293:plane 7B] because [FB:639] is removed <7> [132.212530] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.14: Staged freeing scaler id 0 scaler_users = 0x0 <7> [132.212746] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:293:plane 7B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [132.212927] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [132.213104] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.213296] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.213471] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.213661] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [132.213844] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [132.221097] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [132.221284] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.14: staged scaling request for 20x20->1920x1080 scaler_users = 0x4000 <7> [132.221567] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:293:plane 7B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.221772] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.221971] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.222172] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [132.222393] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [132.222712] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.14: staged scaling request for 20x20->1920x1080 scaler_users = 0x4000 <7> [132.222929] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:293:plane 7B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.223125] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.223366] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.223582] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [132.223781] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [132.223997] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1 <7> [132.224218] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [132.224470] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [132.224733] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:293 <7> [132.229125] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [132.229168] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:293:plane 7B] because [FB:639] is removed <7> [132.229189] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.14: Staged freeing scaler id 0 scaler_users = 0x0 <7> [132.229430] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:293:plane 7B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [132.229594] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [132.229753] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.229909] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.230064] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.230246] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0 <7> [132.230414] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <6> [132.237855] [IGT] kms_plane_scaling: finished subtest pipe-B, SUCCESS <6> [132.238427] [IGT] kms_plane_scaling: starting dynamic subtest pipe-C <7> [132.240275] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [132.240472] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [132.241097] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [132.241300] i915 0000:00:02.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6) <7> [132.241940] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [132.242139] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [132.242809] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [132.243632] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [132.243827] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [132.244495] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [132.244700] i915 0000:00:02.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6) <7> [132.245441] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [132.245619] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [132.246263] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [132.247044] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [132.247281] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [132.247940] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [132.248156] i915 0000:00:02.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6) <7> [132.248812] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [132.248988] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [132.249610] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [132.250792] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:639] <7> [132.252554] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:588:HDMI-A-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [132.252750] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24) <7> [132.252915] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:447:pipe C] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [132.253080] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:587:DDI B/PHY B] [CRTC:447:pipe C] <7> [132.253247] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.enable (expected yes, found no) <7> [132.253412] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.active (expected yes, found no) <7> [132.253572] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in cpu_transcoder (expected 1, found -1) <7> [132.253730] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in lane_count (expected 4, found 0) <7> [132.253926] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000) <7> [132.254084] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [132.254264] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0) <7> [132.254429] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2080, found 0) <7> [132.254586] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0) <7> [132.254743] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2080, found 0) <7> [132.254901] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 1968, found 0) <7> [132.255090] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2000, found 0) <7> [132.255255] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0) <7> [132.255420] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0) <7> [132.255585] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1083, found 0) <7> [132.255742] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1088, found 0) <7> [132.255897] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1144, found 0) <7> [132.256052] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1144, found 0) <7> [132.256237] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0) <7> [132.256423] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2080, found 0) <7> [132.256591] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0) <7> [132.256749] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2080, found 0) <7> [132.256916] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 1968, found 0) <7> [132.257073] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2000, found 0) <7> [132.257252] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0) <7> [132.257411] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0) <7> [132.257566] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1083, found 0) <7> [132.257734] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1088, found 0) <7> [132.257910] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1144, found 0) <7> [132.258075] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1144, found 0) <7> [132.258240] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [132.258406] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0) <7> [132.258560] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0) <7> [132.258714] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in has_hdmi_sink (expected yes, found no) <7> [132.258867] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in has_infoframe (expected yes, found no) <7> [132.259044] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [132.259222] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 285500, found 0) <7> [132.259411] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 285500, found 0) <7> [132.259566] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in port_clock (expected 285500, found 0) <7> [132.259730] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in infoframes.enable (expected 0x00000071, found 0x00000000) <7> [132.259885] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in avi infoframe <7> [132.260038] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [132.260208] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [132.260210] i915 0000:00:02.0: colorspace: RGB <7> [132.260212] i915 0000:00:02.0: scan mode: Underscan <7> [132.260214] i915 0000:00:02.0: colorimetry: No Data <7> [132.260217] i915 0000:00:02.0: picture aspect: No Data <7> [132.260220] i915 0000:00:02.0: active aspect: Same as Picture <7> [132.260223] i915 0000:00:02.0: itc: No Data <7> [132.260225] i915 0000:00:02.0: extended colorimetry: xvYCC 601 <7> [132.260228] i915 0000:00:02.0: quantization range: Full <7> [132.260238] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling <7> [132.260241] i915 0000:00:02.0: video code: 0 <7> [132.260244] i915 0000:00:02.0: ycc quantization range: Full <7> [132.260246] i915 0000:00:02.0: hdmi content type: Graphics <7> [132.260249] i915 0000:00:02.0: pixel repeat: 0 <7> [132.260252] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0 <7> [132.260255] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [132.260418] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in spd infoframe <7> [132.260581] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [132.260734] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [132.260735] i915 0000:00:02.0: vendor: Intel <7> [132.260737] i915 0000:00:02.0: product: Integrated gfx <7> [132.260739] i915 0000:00:02.0: source device information: PC General (0x9) <7> [132.260740] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [132.260901] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hdmi infoframe <7> [132.261055] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [132.261208] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4 <7> [132.261210] i915 0000:00:02.0: empty frame <7> [132.261212] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [132.261388] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:309:pipe B] fastset requirement not met, forcing full modeset <7> [132.261543] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.enable (expected no, found yes) <7> [132.261731] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.active (expected no, found yes) <7> [132.261891] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in cpu_transcoder (expected -1, found 2) <7> [132.262052] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in lane_count (expected 0, found 4) <7> [132.262207] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040) <7> [132.262390] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [132.262544] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920) <7> [132.262699] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2080) <7> [132.262855] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920) <7> [132.263037] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2080) <7> [132.263194] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 1968) <7> [132.263369] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2000) <7> [132.263531] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080) <7> [132.263685] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080) <7> [132.263839] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1083) <7> [132.263992] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1088) <7> [132.264180] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1144) <7> [132.264365] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1144) <7> [132.264532] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920) <7> [132.264698] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2080) <7> [132.264857] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920) <7> [132.265013] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2080) <7> [132.265169] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1968) <7> [132.265431] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2000) <7> [132.265593] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080) <7> [132.265748] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080) <7> [132.265909] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1083) <7> [132.266063] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1088) <7> [132.266216] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1144) <7> [132.266400] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1144) <7> [132.266588] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [132.266743] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1) <7> [132.266905] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4) <7> [132.267067] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in has_hdmi_sink (expected no, found yes) <7> [132.267222] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in has_infoframe (expected no, found yes) <7> [132.267395] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [132.267549] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 285500) <7> [132.267712] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 285500) <7> [132.267894] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in port_clock (expected 0, found 285500) <7> [132.268050] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in infoframes.enable (expected 0x00000000, found 0x00000071) <7> [132.268210] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in avi infoframe <7> [132.268389] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [132.268543] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [132.268695] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [132.268697] i915 0000:00:02.0: colorspace: RGB <7> [132.268699] i915 0000:00:02.0: scan mode: Underscan <7> [132.268701] i915 0000:00:02.0: colorimetry: No Data <7> [132.268703] i915 0000:00:02.0: picture aspect: No Data <7> [132.268704] i915 0000:00:02.0: active aspect: Same as Picture <7> [132.268706] i915 0000:00:02.0: itc: No Data <7> [132.268707] i915 0000:00:02.0: extended colorimetry: xvYCC 601 <7> [132.268709] i915 0000:00:02.0: quantization range: Full <7> [132.268710] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling <7> [132.268712] i915 0000:00:02.0: video code: 0 <7> [132.268714] i915 0000:00:02.0: ycc quantization range: Full <7> [132.268715] i915 0000:00:02.0: hdmi content type: Graphics <7> [132.268717] i915 0000:00:02.0: pixel repeat: 0 <7> [132.268718] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0 <7> [132.268720] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in spd infoframe <7> [132.268874] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [132.269026] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [132.269202] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [132.269205] i915 0000:00:02.0: vendor: Intel <7> [132.269208] i915 0000:00:02.0: product: Integrated gfx <7> [132.269210] i915 0000:00:02.0: source device information: PC General (0x9) <7> [132.269213] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hdmi infoframe <7> [132.269409] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [132.269571] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [132.269723] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4 <7> [132.269725] i915 0000:00:02.0: empty frame <7> [132.269728] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:447:pipe C] fastset requirement not met, forcing full modeset <7> [132.269893] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:309:pipe B] releasing DPLL 0 <7> [132.270075] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:447:pipe C] scaler_user index 2.16: staged scaling request for 20x20->1920x1080 scaler_users = 0x10000 <7> [132.270275] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:309:pipe B] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x2 -> 0x4 <7> [132.270431] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:447:pipe C] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x2 -> 0x4 <7> [132.270622] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:303:cursor B] ddb (1993 - 2048) -> ( 0 - 0), size 55 -> 0 <7> [132.270778] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:311:plane 1C] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.270943] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:441:cursor C] ddb ( 0 - 0) -> (1993 - 2048), size 0 -> 55 <7> [132.271105] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:311:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.271270] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:311:plane 1C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.271426] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:311:plane 1C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [132.271578] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:311:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [132.271789] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:447:pipe C] data rate 571000 num active planes 1 <7> [132.271952] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [132.272120] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [132.272321] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:309:pipe B] min cdclk: 192000 kHz -> 0 kHz <7> [132.272481] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:447:pipe C] min cdclk: 0 kHz -> 192000 kHz <7> [132.272661] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 35688 kHz -> 8922 kHz <7> [132.272825] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:447:pipe C] allocated DPLL 0 <7> [132.273029] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:447:pipe C] reserving DPLL 0 <7> [132.273192] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:447:pipe C] attached scaler id 2.0 to PLANE:311 <7> [132.273381] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:309:pipe B] enable: no [modeset] <7> [132.273556] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:173:plane 1B] fb: [NOFB], visible: no <7> [132.273717] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:203:plane 2B] fb: [NOFB], visible: no <7> [132.273876] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:233:plane 3B] fb: [NOFB], visible: no <7> [132.274039] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:263:plane 4B] fb: [NOFB], visible: no <7> [132.274226] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:273:plane 5B] fb: [NOFB], visible: no <7> [132.274423] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:283:plane 6B] fb: [NOFB], visible: no <7> [132.274580] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:293:plane 7B] fb: [NOFB], visible: no <7> [132.274743] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:303:cursor B] fb: [NOFB], visible: no <7> [132.274899] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:447:pipe C] enable: yes [modeset] <7> [132.275054] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [132.275248] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: C, pipe bpp: 24, dithering: 0 <7> [132.275403] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [132.275565] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [132.275727] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [132.275882] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [132.276036] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 1, infoframes: 1, infoframes enabled: 0x71 <7> [132.276190] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] GCP: 0x0 <7> [132.276391] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [132.276394] i915 0000:00:02.0: colorspace: RGB <7> [132.276395] i915 0000:00:02.0: scan mode: Underscan <7> [132.276397] i915 0000:00:02.0: colorimetry: No Data <7> [132.276399] i915 0000:00:02.0: picture aspect: No Data <7> [132.276400] i915 0000:00:02.0: active aspect: Same as Picture <7> [132.276402] i915 0000:00:02.0: itc: No Data <7> [132.276403] i915 0000:00:02.0: extended colorimetry: xvYCC 601 <7> [132.276405] i915 0000:00:02.0: quantization range: Full <7> [132.276406] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling <7> [132.276408] i915 0000:00:02.0: video code: 0 <7> [132.276409] i915 0000:00:02.0: ycc quantization range: Full <7> [132.276411] i915 0000:00:02.0: hdmi content type: Graphics <7> [132.276412] i915 0000:00:02.0: pixel repeat: 0 <7> [132.276414] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0 <7> [132.276415] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [132.276417] i915 0000:00:02.0: vendor: Intel <7> [132.276419] i915 0000:00:02.0: product: Integrated gfx <7> [132.276420] i915 0000:00:02.0: source device information: PC General (0x9) <7> [132.276422] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4 <7> [132.276423] i915 0000:00:02.0: empty frame <7> [132.276425] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00 <7> [132.276586] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47 <7> [132.276741] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff <7> [132.276902] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03 00 <7> [132.277057] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2 <7> [132.277210] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [132.277384] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1144, vmax: 1144, flipline: 1144, pipeline full: 61, guardband: 63 vsync start: 0, vsync end: 0 <7> [132.277559] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1144, vmax vtotal: 1144 <7> [132.277738] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [132.277899] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5 <7> [132.278055] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5 <7> [132.278219] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5 <7> [132.278403] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x40 0x5 <7> [132.278558] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5 <7> [132.278713] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 285500, pipe src: 1920x1080+0+0, pixel rate 285500, min cdclk 192000 <7> [132.278907] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 59, ips linetime: 0 <7> [132.279070] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x10000, scaler_id: -1, scaling_filter: 0 <7> [132.279242] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [132.279407] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [132.279566] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1801be, cfgcr1: 0x488, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [132.279723] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [132.279878] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [132.280064] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [132.280217] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [132.280395] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [132.280556] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [132.280710] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [132.280863] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [132.281019] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [132.281200] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [132.281376] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [132.281529] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [132.281690] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [132.281843] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:311:plane 1C] fb: [FB:639] 20x20 format = RG16 little-endian (0x36314752) modifier = 0x0, visible: yes <7> [132.281999] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: 0, scaling_filter: 0 <7> [132.282153] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 20.000000x20.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [132.282355] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:341:plane 2C] fb: [NOFB], visible: no <7> [132.282510] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:371:plane 3C] fb: [NOFB], visible: no <7> [132.282670] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:401:plane 4C] fb: [NOFB], visible: no <7> [132.282823] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:411:plane 5C] fb: [NOFB], visible: no <7> [132.282984] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:421:plane 6C] fb: [NOFB], visible: no <7> [132.283136] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:431:plane 7C] fb: [NOFB], visible: no <7> [132.283305] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:441:cursor C] fb: [NOFB], visible: no <7> [132.283740] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4 <7> [132.283953] i915 0000:00:02.0: [drm:intel_audio_codec_disable [i915]] [CONNECTOR:588:HDMI-A-1][ENCODER:587:DDI B/PHY B] Disable audio codec on [CRTC:309:pipe B] <7> [132.295601] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [132.298251] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:588:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10 <7> [132.298867] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [132.299024] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [132.299573] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [132.299754] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:588:HDMI-A-1] Failed to read TMDS config: -6 <7> [132.299770] i915 0000:00:02.0: [drm:intel_ddi_disable [i915]] [CONNECTOR:588:HDMI-A-1] Failed to reset sink scrambling/TMDS bit clock ratio <7> [132.299950] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe B <7> [132.304326] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [132.304567] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x2, on? 1) for [CRTC:309:pipe B] <7> [132.304758] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [132.304934] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:587:DDI B/PHY B] <7> [132.305096] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:597:DDI TC1/PHY TC1] <7> [132.305272] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:599:DP-MST A] <7> [132.305458] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:600:DP-MST B] <7> [132.305616] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:601:DP-MST C] <7> [132.305773] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:602:DP-MST D] <7> [132.305930] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:607:DDI TC2/PHY TC2] <7> [132.306086] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:609:DP-MST A] <7> [132.306252] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:610:DP-MST B] <7> [132.306441] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:611:DP-MST C] <7> [132.306597] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:612:DP-MST D] <7> [132.306753] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:616:DDI TC3/PHY TC3] <7> [132.306911] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:618:DP-MST A] <7> [132.307066] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:619:DP-MST B] <7> [132.307221] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:620:DP-MST C] <7> [132.307411] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:621:DP-MST D] <7> [132.307599] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:625:DDI TC4/PHY TC4] <7> [132.307758] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:627:DP-MST A] <7> [132.307916] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:628:DP-MST B] <7> [132.308074] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:629:DP-MST C] <7> [132.308229] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:630:DP-MST D] <7> [132.308430] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:598:DP-1] <7> [132.308644] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:608:DP-2] <7> [132.308828] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:617:DP-3] <7> [132.309010] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:626:DP-4] <7> [132.309375] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x4, on? 0) for [CRTC:447:pipe C] <7> [132.309540] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [132.310037] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [132.310311] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe C <7> [132.311024] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:588:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10 <7> [132.311590] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [132.311748] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [132.312272] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [132.312444] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:588:HDMI-A-1] Failed to read TMDS config: -6 <7> [132.312460] i915 0000:00:02.0: [drm:intel_ddi_enable [i915]] [CONNECTOR:588:HDMI-A-1] Failed to configure sink scrambling/TMDS bit clock ratio <7> [132.321171] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:309:pipe B] <7> [132.321563] i915 0000:00:02.0: [drm:intel_audio_codec_enable [i915]] [CONNECTOR:588:HDMI-A-1][ENCODER:587:DDI B/PHY B] Enable audio codec on [CRTC:447:pipe C], 64 bytes ELD <7> [132.329438] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] HDMI audio pixel clock setting for 285500 not found, falling back to defaults <7> [132.329625] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] Configuring HDMI audio for pixel clock 25200 (0x00010000) <7> [132.329787] i915 0000:00:02.0: [drm:hsw_audio_config_update [i915]] using automatic N <6> [132.329953] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 5 not expected <6> [132.329956] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 0 not expected <6> [132.329957] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 10 not expected <6> [132.329959] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 6 not expected <7> [132.330097] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:588:HDMI-A-1] <7> [132.330433] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:447:pipe C] <7> [132.331695] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe C <7> [132.332107] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl <7> [132.332148] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:311:plane 1C] because [FB:639] is removed <7> [132.332171] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:447:pipe C] scaler_user index 2.16: Staged freeing scaler id 0 scaler_users = 0x0 <7> [132.332377] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:311:plane 1C] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [132.332551] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:311:plane 1C] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [132.332707] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:311:plane 1C] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.332863] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:311:plane 1C] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.333017] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:311:plane 1C] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.333195] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:447:pipe C] data rate 0 num active planes 0 <7> [132.333378] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [132.338084] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:640] <7> [132.338229] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:447:pipe C] scaler_user index 2.17: staged scaling request for 20x20->1920x1080 scaler_users = 0x20000 <7> [132.338469] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:341:plane 2C] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.338639] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:341:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.338796] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:341:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.338953] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:341:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [132.339109] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:341:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [132.339361] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:447:pipe C] scaler_user index 2.17: staged scaling request for 20x20->1920x1080 scaler_users = 0x20000 <7> [132.339578] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:341:plane 2C] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.339735] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:341:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.339898] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:341:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.340061] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:341:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [132.340215] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:341:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [132.340453] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:447:pipe C] scaler_user index 2.17: staged scaling request for 20x20->1920x1080 scaler_users = 0x20000 <7> [132.340619] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:341:plane 2C] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.340773] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:341:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.340924] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:341:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.341075] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:341:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [132.341227] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:341:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [132.341444] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:447:pipe C] data rate 571000 num active planes 1 <7> [132.341611] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [132.341778] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [132.341986] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:447:pipe C] attached scaler id 2.0 to PLANE:341 <7> [132.346255] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:640] from all active usage due to RMFB ioctl <7> [132.346301] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:341:plane 2C] because [FB:640] is removed <7> [132.346323] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:447:pipe C] scaler_user index 2.17: Staged freeing scaler id 0 scaler_users = 0x0 <7> [132.346520] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:341:plane 2C] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [132.346685] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:341:plane 2C] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [132.346843] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:341:plane 2C] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.346999] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:341:plane 2C] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.347154] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:341:plane 2C] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.347359] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:447:pipe C] data rate 0 num active planes 0 <7> [132.347524] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [132.352513] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x810 <7> [132.354721] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:640] <7> [132.354864] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:447:pipe C] scaler_user index 2.18: staged scaling request for 20x20->1920x1080 scaler_users = 0x40000 <7> [132.355077] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:371:plane 3C] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.355263] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 3C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.355443] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 3C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.355601] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 3C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [132.355758] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 3C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [132.355935] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:447:pipe C] data rate 571000 num active planes 1 <7> [132.356100] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [132.356281] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [132.356519] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:447:pipe C] attached scaler id 2.0 to PLANE:371 <7> [132.356814] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7> [132.356847] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7> [132.362919] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:640] from all active usage due to RMFB ioctl <7> [132.362965] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:371:plane 3C] because [FB:640] is removed <7> [132.362987] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:447:pipe C] scaler_user index 2.18: Staged freeing scaler id 0 scaler_users = 0x0 <7> [132.363187] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:371:plane 3C] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [132.363406] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 3C] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [132.363585] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 3C] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.363743] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 3C] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.363898] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 3C] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.364072] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:447:pipe C] data rate 0 num active planes 0 <7> [132.364247] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [132.371355] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:640] <7> [132.371477] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:447:pipe C] scaler_user index 2.19: staged scaling request for 20x20->1920x1080 scaler_users = 0x80000 <7> [132.371681] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:401:plane 4C] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.371845] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:401:plane 4C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.372004] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:401:plane 4C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.372161] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:401:plane 4C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [132.372339] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:401:plane 4C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [132.372555] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:447:pipe C] data rate 571000 num active planes 1 <7> [132.372723] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [132.372883] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [132.373080] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:447:pipe C] attached scaler id 2.0 to PLANE:401 <7> [132.379615] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:640] from all active usage due to RMFB ioctl <7> [132.379660] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:401:plane 4C] because [FB:640] is removed <7> [132.379684] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:447:pipe C] scaler_user index 2.19: Staged freeing scaler id 0 scaler_users = 0x0 <7> [132.379887] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:401:plane 4C] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [132.380051] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:401:plane 4C] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [132.380209] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:401:plane 4C] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.380389] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:401:plane 4C] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.380573] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:401:plane 4C] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.380749] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:447:pipe C] data rate 0 num active planes 0 <7> [132.380913] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [132.387999] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:640] <7> [132.388137] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:447:pipe C] scaler_user index 2.20: staged scaling request for 20x20->1920x1080 scaler_users = 0x100000 <7> [132.388363] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:411:plane 5C] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.388529] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:411:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.388686] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:411:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.388843] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:411:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [132.388998] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:411:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [132.389171] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:447:pipe C] data rate 571000 num active planes 1 <7> [132.389362] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [132.389525] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [132.389720] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:447:pipe C] attached scaler id 2.0 to PLANE:411 <7> [132.396315] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:640] from all active usage due to RMFB ioctl <7> [132.396361] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:411:plane 5C] because [FB:640] is removed <7> [132.396383] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:447:pipe C] scaler_user index 2.20: Staged freeing scaler id 0 scaler_users = 0x0 <7> [132.396580] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:411:plane 5C] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [132.396743] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:411:plane 5C] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [132.396900] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:411:plane 5C] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.397056] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:411:plane 5C] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.397212] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:411:plane 5C] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.397508] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:447:pipe C] data rate 0 num active planes 0 <7> [132.397747] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [132.404655] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:640] <7> [132.404797] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:447:pipe C] scaler_user index 2.21: staged scaling request for 20x20->1920x1080 scaler_users = 0x200000 <7> [132.405006] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:421:plane 6C] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.405172] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:421:plane 6C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.405355] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:421:plane 6C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.405515] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:421:plane 6C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [132.405672] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:421:plane 6C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [132.405847] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:447:pipe C] data rate 571000 num active planes 1 <7> [132.406032] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [132.406213] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [132.406442] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:447:pipe C] attached scaler id 2.0 to PLANE:421 <7> [132.412912] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:640] from all active usage due to RMFB ioctl <7> [132.412956] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:421:plane 6C] because [FB:640] is removed <7> [132.412979] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:447:pipe C] scaler_user index 2.21: Staged freeing scaler id 0 scaler_users = 0x0 <7> [132.413176] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:421:plane 6C] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [132.413368] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:421:plane 6C] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [132.413527] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:421:plane 6C] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.413683] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:421:plane 6C] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.413840] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:421:plane 6C] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.414012] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:447:pipe C] data rate 0 num active planes 0 <7> [132.414199] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [132.421373] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:640] <7> [132.421511] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:447:pipe C] scaler_user index 2.22: staged scaling request for 20x20->1920x1080 scaler_users = 0x400000 <7> [132.421717] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:431:plane 7C] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.421897] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:431:plane 7C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.422089] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:431:plane 7C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.422308] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:431:plane 7C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [132.422530] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:431:plane 7C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [132.422733] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:447:pipe C] data rate 571000 num active planes 1 <7> [132.422930] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [132.423121] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [132.423387] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:447:pipe C] attached scaler id 2.0 to PLANE:431 <7> [132.429605] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:640] from all active usage due to RMFB ioctl <7> [132.429651] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:431:plane 7C] because [FB:640] is removed <7> [132.429673] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:447:pipe C] scaler_user index 2.22: Staged freeing scaler id 0 scaler_users = 0x0 <7> [132.429870] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:431:plane 7C] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [132.430035] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:431:plane 7C] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [132.430196] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:431:plane 7C] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.430392] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:431:plane 7C] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.430580] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:431:plane 7C] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.430753] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:447:pipe C] data rate 0 num active planes 0 <7> [132.430934] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <6> [132.438396] [IGT] kms_plane_scaling: finished subtest pipe-C, SUCCESS <6> [132.438990] [IGT] kms_plane_scaling: starting dynamic subtest pipe-D <7> [132.441012] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [132.441257] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [132.441926] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [132.442137] i915 0000:00:02.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6) <7> [132.442822] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [132.443059] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [132.443787] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [132.444677] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [132.444927] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [132.445629] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [132.445847] i915 0000:00:02.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6) <7> [132.446530] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [132.446724] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [132.447397] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [132.448188] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [132.448402] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [132.449114] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [132.449316] i915 0000:00:02.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6) <7> [132.449973] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [132.450144] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [132.450775] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [132.451935] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:640] <7> [132.453806] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:588:HDMI-A-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [132.454003] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24) <7> [132.454170] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:585:pipe D] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [132.454399] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:587:DDI B/PHY B] [CRTC:585:pipe D] <7> [132.454556] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.enable (expected yes, found no) <7> [132.454719] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.active (expected yes, found no) <7> [132.454887] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in cpu_transcoder (expected 2, found -1) <7> [132.455083] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in lane_count (expected 4, found 0) <7> [132.455262] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000) <7> [132.455423] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [132.455592] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0) <7> [132.455749] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2080, found 0) <7> [132.455906] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0) <7> [132.456080] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2080, found 0) <7> [132.456263] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 1968, found 0) <7> [132.456427] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2000, found 0) <7> [132.456582] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0) <7> [132.456745] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0) <7> [132.456899] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1083, found 0) <7> [132.457054] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1088, found 0) <7> [132.457208] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1144, found 0) <7> [132.457437] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1144, found 0) <7> [132.457592] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0) <7> [132.457757] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2080, found 0) <7> [132.457922] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0) <7> [132.458076] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2080, found 0) <7> [132.458230] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 1968, found 0) <7> [132.458403] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2000, found 0) <7> [132.458590] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0) <7> [132.458744] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0) <7> [132.458906] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1083, found 0) <7> [132.459068] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1088, found 0) <7> [132.459224] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1144, found 0) <7> [132.459396] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1144, found 0) <7> [132.459551] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [132.459713] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0) <7> [132.459900] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0) <7> [132.460055] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in has_hdmi_sink (expected yes, found no) <7> [132.460217] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in has_infoframe (expected yes, found no) <7> [132.460399] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [132.460554] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 285500, found 0) <7> [132.460709] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 285500, found 0) <7> [132.460865] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in port_clock (expected 285500, found 0) <7> [132.461055] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in infoframes.enable (expected 0x00000071, found 0x00000000) <7> [132.461210] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in avi infoframe <7> [132.461454] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [132.461615] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [132.461617] i915 0000:00:02.0: colorspace: RGB <7> [132.461619] i915 0000:00:02.0: scan mode: Underscan <7> [132.461621] i915 0000:00:02.0: colorimetry: No Data <7> [132.461623] i915 0000:00:02.0: picture aspect: No Data <7> [132.461624] i915 0000:00:02.0: active aspect: Same as Picture <7> [132.461626] i915 0000:00:02.0: itc: No Data <7> [132.461628] i915 0000:00:02.0: extended colorimetry: xvYCC 601 <7> [132.461629] i915 0000:00:02.0: quantization range: Full <7> [132.461631] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling <7> [132.461632] i915 0000:00:02.0: video code: 0 <7> [132.461634] i915 0000:00:02.0: ycc quantization range: Full <7> [132.461636] i915 0000:00:02.0: hdmi content type: Graphics <7> [132.461637] i915 0000:00:02.0: pixel repeat: 0 <7> [132.461639] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0 <7> [132.461641] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [132.461795] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in spd infoframe <7> [132.461948] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [132.462102] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [132.462103] i915 0000:00:02.0: vendor: Intel <7> [132.462105] i915 0000:00:02.0: product: Integrated gfx <7> [132.462107] i915 0000:00:02.0: source device information: PC General (0x9) <7> [132.462108] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [132.462293] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hdmi infoframe <7> [132.462482] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [132.462636] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4 <7> [132.462638] i915 0000:00:02.0: empty frame <7> [132.462640] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [132.462804] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:447:pipe C] fastset requirement not met, forcing full modeset <7> [132.462970] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.enable (expected no, found yes) <7> [132.463126] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.active (expected no, found yes) <7> [132.463294] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in cpu_transcoder (expected -1, found 3) <7> [132.463451] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in lane_count (expected 0, found 4) <7> [132.463634] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040) <7> [132.463794] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [132.463955] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920) <7> [132.464109] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2080) <7> [132.464280] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920) <7> [132.464443] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2080) <7> [132.464604] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 1968) <7> [132.464763] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2000) <7> [132.464965] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080) <7> [132.465122] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080) <7> [132.465302] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1083) <7> [132.465468] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1088) <7> [132.465622] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1144) <7> [132.465777] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1144) <7> [132.465931] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920) <7> [132.466117] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2080) <7> [132.466299] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920) <7> [132.466454] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2080) <7> [132.466615] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1968) <7> [132.466770] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2000) <7> [132.466924] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080) <7> [132.467096] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080) <7> [132.467278] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1083) <7> [132.467441] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1088) <7> [132.467595] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1144) <7> [132.467759] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1144) <7> [132.467913] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [132.468068] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1) <7> [132.468221] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4) <7> [132.468438] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in has_hdmi_sink (expected no, found yes) <7> [132.468594] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in has_infoframe (expected no, found yes) <7> [132.468756] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [132.468921] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 285500) <7> [132.469077] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 285500) <7> [132.469231] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in port_clock (expected 0, found 285500) <7> [132.469409] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in infoframes.enable (expected 0x00000000, found 0x00000071) <7> [132.469596] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in avi infoframe <7> [132.469753] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [132.469914] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [132.470075] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [132.470078] i915 0000:00:02.0: colorspace: RGB <7> [132.470080] i915 0000:00:02.0: scan mode: Underscan <7> [132.470081] i915 0000:00:02.0: colorimetry: No Data <7> [132.470083] i915 0000:00:02.0: picture aspect: No Data <7> [132.470085] i915 0000:00:02.0: active aspect: Same as Picture <7> [132.470086] i915 0000:00:02.0: itc: No Data <7> [132.470088] i915 0000:00:02.0: extended colorimetry: xvYCC 601 <7> [132.470089] i915 0000:00:02.0: quantization range: Full <7> [132.470091] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling <7> [132.470093] i915 0000:00:02.0: video code: 0 <7> [132.470094] i915 0000:00:02.0: ycc quantization range: Full <7> [132.470096] i915 0000:00:02.0: hdmi content type: Graphics <7> [132.470098] i915 0000:00:02.0: pixel repeat: 0 <7> [132.470099] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0 <7> [132.470101] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in spd infoframe <7> [132.470276] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [132.470437] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [132.470595] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [132.470597] i915 0000:00:02.0: vendor: Intel <7> [132.470598] i915 0000:00:02.0: product: Integrated gfx <7> [132.470600] i915 0000:00:02.0: source device information: PC General (0x9) <7> [132.470602] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hdmi infoframe <7> [132.470759] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [132.470959] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [132.471114] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4 <7> [132.471116] i915 0000:00:02.0: empty frame <7> [132.471118] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:585:pipe D] fastset requirement not met, forcing full modeset <7> [132.471301] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:447:pipe C] releasing DPLL 0 <7> [132.471496] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:585:pipe D] scaler_user index 3.24: staged scaling request for 20x20->1920x1080 scaler_users = 0x1000000 <7> [132.471684] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:447:pipe C] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x4 -> 0x8 <7> [132.471841] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:585:pipe D] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x4 -> 0x8 <7> [132.472012] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:441:cursor C] ddb (1993 - 2048) -> ( 0 - 0), size 55 -> 0 <7> [132.472193] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:449:plane 1D] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.472370] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:579:cursor D] ddb ( 0 - 0) -> (1993 - 2048), size 0 -> 55 <7> [132.472526] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 1D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.472689] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 1D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.472845] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 1D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [132.473000] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 1D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [132.473177] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:585:pipe D] data rate 571000 num active planes 1 <7> [132.473399] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [132.473559] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [132.473749] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:447:pipe C] min cdclk: 192000 kHz -> 0 kHz <7> [132.473919] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:585:pipe D] min cdclk: 0 kHz -> 192000 kHz <7> [132.474101] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:585:pipe D] allocated DPLL 0 <7> [132.474281] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:585:pipe D] reserving DPLL 0 <7> [132.474447] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:585:pipe D] attached scaler id 3.0 to PLANE:449 <7> [132.474636] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:447:pipe C] enable: no [modeset] <7> [132.474802] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:311:plane 1C] fb: [NOFB], visible: no <7> [132.474965] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:341:plane 2C] fb: [NOFB], visible: no <7> [132.475131] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:371:plane 3C] fb: [NOFB], visible: no <7> [132.475303] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:401:plane 4C] fb: [NOFB], visible: no <7> [132.475461] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:411:plane 5C] fb: [NOFB], visible: no <7> [132.475628] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:421:plane 6C] fb: [NOFB], visible: no <7> [132.475808] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:431:plane 7C] fb: [NOFB], visible: no <7> [132.475971] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:441:cursor C] fb: [NOFB], visible: no <7> [132.476128] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:585:pipe D] enable: yes [modeset] <7> [132.476308] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [132.476466] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: D, pipe bpp: 24, dithering: 0 <7> [132.476622] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [132.476778] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [132.476966] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [132.477131] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [132.477307] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 1, infoframes: 1, infoframes enabled: 0x71 <7> [132.477465] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] GCP: 0x0 <7> [132.477628] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [132.477630] i915 0000:00:02.0: colorspace: RGB <7> [132.477632] i915 0000:00:02.0: scan mode: Underscan <7> [132.477634] i915 0000:00:02.0: colorimetry: No Data <7> [132.477635] i915 0000:00:02.0: picture aspect: No Data <7> [132.477637] i915 0000:00:02.0: active aspect: Same as Picture <7> [132.477639] i915 0000:00:02.0: itc: No Data <7> [132.477640] i915 0000:00:02.0: extended colorimetry: xvYCC 601 <7> [132.477642] i915 0000:00:02.0: quantization range: Full <7> [132.477643] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling <7> [132.477645] i915 0000:00:02.0: video code: 0 <7> [132.477647] i915 0000:00:02.0: ycc quantization range: Full <7> [132.477648] i915 0000:00:02.0: hdmi content type: Graphics <7> [132.477650] i915 0000:00:02.0: pixel repeat: 0 <7> [132.477651] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0 <7> [132.477653] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [132.477655] i915 0000:00:02.0: vendor: Intel <7> [132.477657] i915 0000:00:02.0: product: Integrated gfx <7> [132.477658] i915 0000:00:02.0: source device information: PC General (0x9) <7> [132.477660] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4 <7> [132.477662] i915 0000:00:02.0: empty frame <7> [132.477664] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00 <7> [132.477818] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47 <7> [132.477974] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff <7> [132.478128] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03 00 <7> [132.478335] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2 <7> [132.478498] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [132.478663] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1144, vmax: 1144, flipline: 1144, pipeline full: 61, guardband: 63 vsync start: 0, vsync end: 0 <7> [132.478825] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1144, vmax vtotal: 1144 <7> [132.478985] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [132.479141] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5 <7> [132.479309] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5 <7> [132.479465] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5 <7> [132.479658] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x40 0x5 <7> [132.479815] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5 <7> [132.479976] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 285500, pipe src: 1920x1080+0+0, pixel rate 285500, min cdclk 192000 <7> [132.480137] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 59, ips linetime: 0 <7> [132.480316] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x1000000, scaler_id: -1, scaling_filter: 0 <7> [132.480474] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [132.480632] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [132.480820] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1801be, cfgcr1: 0x488, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [132.480979] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [132.481141] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [132.481320] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [132.481475] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [132.481630] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [132.481784] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [132.481936] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [132.482132] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [132.482311] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [132.482472] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [132.482635] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [132.482789] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [132.482942] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [132.483096] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:449:plane 1D] fb: [FB:640] 20x20 format = RG16 little-endian (0x36314752) modifier = 0x0, visible: yes <7> [132.483296] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: 0, scaling_filter: 0 <7> [132.483452] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 20.000000x20.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [132.483612] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:479:plane 2D] fb: [NOFB], visible: no <7> [132.483773] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:509:plane 3D] fb: [NOFB], visible: no <7> [132.483925] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:539:plane 4D] fb: [NOFB], visible: no <7> [132.484077] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:549:plane 5D] fb: [NOFB], visible: no <7> [132.484245] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:559:plane 6D] fb: [NOFB], visible: no <7> [132.484422] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:569:plane 7D] fb: [NOFB], visible: no <7> [132.484582] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:579:cursor D] fb: [NOFB], visible: no <7> [132.484980] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_5 <7> [132.485184] i915 0000:00:02.0: [drm:intel_audio_codec_disable [i915]] [CONNECTOR:588:HDMI-A-1][ENCODER:587:DDI B/PHY B] Disable audio codec on [CRTC:447:pipe C] <7> [132.496130] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [132.498263] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:588:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10 <7> [132.498899] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [132.499049] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [132.499651] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [132.499823] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:588:HDMI-A-1] Failed to read TMDS config: -6 <7> [132.499839] i915 0000:00:02.0: [drm:intel_ddi_disable [i915]] [CONNECTOR:588:HDMI-A-1] Failed to reset sink scrambling/TMDS bit clock ratio <7> [132.500026] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe C <7> [132.505264] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [132.505460] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x4, on? 1) for [CRTC:447:pipe C] <7> [132.505649] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [132.505823] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:587:DDI B/PHY B] <7> [132.505986] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:597:DDI TC1/PHY TC1] <7> [132.506144] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:599:DP-MST A] <7> [132.506330] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:600:DP-MST B] <7> [132.506519] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:601:DP-MST C] <7> [132.506678] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:602:DP-MST D] <7> [132.506837] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:607:DDI TC2/PHY TC2] <7> [132.506994] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:609:DP-MST A] <7> [132.507150] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:610:DP-MST B] <7> [132.507325] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:611:DP-MST C] <7> [132.507501] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:612:DP-MST D] <7> [132.507655] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:616:DDI TC3/PHY TC3] <7> [132.507810] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:618:DP-MST A] <7> [132.507963] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:619:DP-MST B] <7> [132.508117] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:620:DP-MST C] <7> [132.508282] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:621:DP-MST D] <7> [132.508458] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:625:DDI TC4/PHY TC4] <7> [132.508613] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:627:DP-MST A] <7> [132.508768] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:628:DP-MST B] <7> [132.508922] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:629:DP-MST C] <7> [132.509079] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:630:DP-MST D] <7> [132.509248] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:598:DP-1] <7> [132.509461] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:608:DP-2] <7> [132.509648] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:617:DP-3] <7> [132.509833] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:626:DP-4] <7> [132.510159] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x8, on? 0) for [CRTC:585:pipe D] <7> [132.510374] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [132.510612] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [132.510862] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe D <7> [132.511604] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:588:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10 <7> [132.512257] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [132.512405] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [132.513015] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [132.513190] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:588:HDMI-A-1] Failed to read TMDS config: -6 <7> [132.513205] i915 0000:00:02.0: [drm:intel_ddi_enable [i915]] [CONNECTOR:588:HDMI-A-1] Failed to configure sink scrambling/TMDS bit clock ratio <7> [132.521915] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:447:pipe C] <7> [132.522351] i915 0000:00:02.0: [drm:intel_audio_codec_enable [i915]] [CONNECTOR:588:HDMI-A-1][ENCODER:587:DDI B/PHY B] Enable audio codec on [CRTC:585:pipe D], 64 bytes ELD <7> [132.530206] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] HDMI audio pixel clock setting for 285500 not found, falling back to defaults <7> [132.530405] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] Configuring HDMI audio for pixel clock 25200 (0x00010000) <7> [132.530567] i915 0000:00:02.0: [drm:hsw_audio_config_update [i915]] using automatic N <6> [132.530733] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 5 not expected <6> [132.530736] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 0 not expected <6> [132.530737] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 10 not expected <6> [132.530739] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 6 not expected <7> [132.530877] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:588:HDMI-A-1] <7> [132.531137] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:585:pipe D] <7> [132.532431] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe D <7> [132.532853] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:640] from all active usage due to RMFB ioctl <7> [132.532897] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:449:plane 1D] because [FB:640] is removed <7> [132.532922] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:585:pipe D] scaler_user index 3.24: Staged freeing scaler id 0 scaler_users = 0x0 <7> [132.533107] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:449:plane 1D] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [132.533318] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 1D] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [132.533478] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 1D] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.533633] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 1D] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.533786] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 1D] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.533959] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:585:pipe D] data rate 0 num active planes 0 <7> [132.534120] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [132.538772] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:641] <7> [132.538932] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:585:pipe D] scaler_user index 3.25: staged scaling request for 20x20->1920x1080 scaler_users = 0x2000000 <7> [132.539155] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:479:plane 2D] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.539343] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 2D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.539579] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 2D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.539810] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 2D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [132.540041] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 2D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [132.540401] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:585:pipe D] scaler_user index 3.25: staged scaling request for 20x20->1920x1080 scaler_users = 0x2000000 <7> [132.540647] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:479:plane 2D] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.540870] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 2D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.541094] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 2D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.541334] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 2D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [132.541561] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 2D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [132.541802] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:585:pipe D] data rate 571000 num active planes 1 <7> [132.542040] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [132.542311] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [132.542601] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:585:pipe D] attached scaler id 3.0 to PLANE:479 <7> [132.542668] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x810 <7> [132.547007] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:641] from all active usage due to RMFB ioctl <7> [132.547051] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:479:plane 2D] because [FB:641] is removed <7> [132.547073] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:585:pipe D] scaler_user index 3.25: Staged freeing scaler id 0 scaler_users = 0x0 <7> [132.547279] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7> [132.547306] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7> [132.547361] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:479:plane 2D] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [132.547602] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 2D] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [132.547832] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 2D] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.548064] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 2D] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.548303] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 2D] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.548556] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:585:pipe D] data rate 0 num active planes 0 <7> [132.548794] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [132.555516] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:641] <7> [132.555658] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:585:pipe D] scaler_user index 3.26: staged scaling request for 20x20->1920x1080 scaler_users = 0x4000000 <7> [132.555875] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:509:plane 3D] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.556039] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:509:plane 3D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.556282] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:509:plane 3D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.556487] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:509:plane 3D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [132.556646] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:509:plane 3D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [132.556883] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:585:pipe D] scaler_user index 3.26: staged scaling request for 20x20->1920x1080 scaler_users = 0x4000000 <7> [132.557067] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:509:plane 3D] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.557242] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:509:plane 3D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.557403] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:509:plane 3D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.557559] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:509:plane 3D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [132.557721] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:509:plane 3D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [132.557987] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:585:pipe D] scaler_user index 3.26: staged scaling request for 20x20->1920x1080 scaler_users = 0x4000000 <7> [132.558172] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:509:plane 3D] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.558386] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:509:plane 3D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.558554] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:509:plane 3D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.558722] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:509:plane 3D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [132.558891] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:509:plane 3D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [132.559066] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:585:pipe D] data rate 571000 num active planes 1 <7> [132.559252] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [132.559415] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [132.559635] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:585:pipe D] attached scaler id 3.0 to PLANE:509 <7> [132.563693] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:641] from all active usage due to RMFB ioctl <7> [132.563737] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:509:plane 3D] because [FB:641] is removed <7> [132.563759] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:585:pipe D] scaler_user index 3.26: Staged freeing scaler id 0 scaler_users = 0x0 <7> [132.563954] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:509:plane 3D] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [132.564115] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:509:plane 3D] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [132.564289] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:509:plane 3D] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.564445] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:509:plane 3D] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.564601] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:509:plane 3D] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.564768] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:585:pipe D] data rate 0 num active planes 0 <7> [132.564968] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [132.572160] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:641] <7> [132.572346] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:585:pipe D] scaler_user index 3.27: staged scaling request for 20x20->1920x1080 scaler_users = 0x8000000 <7> [132.572594] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:539:plane 4D] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.572758] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:539:plane 4D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.572915] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:539:plane 4D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.573071] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:539:plane 4D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [132.573224] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:539:plane 4D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [132.573530] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:585:pipe D] scaler_user index 3.27: staged scaling request for 20x20->1920x1080 scaler_users = 0x8000000 <7> [132.573792] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:539:plane 4D] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.574018] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:539:plane 4D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.574254] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:539:plane 4D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.574485] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:539:plane 4D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [132.574717] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:539:plane 4D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [132.575052] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:585:pipe D] scaler_user index 3.27: staged scaling request for 20x20->1920x1080 scaler_users = 0x8000000 <7> [132.575314] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:539:plane 4D] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.575545] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:539:plane 4D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.575772] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:539:plane 4D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.576003] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:539:plane 4D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [132.576227] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:539:plane 4D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [132.576487] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:585:pipe D] data rate 571000 num active planes 1 <7> [132.576729] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [132.576963] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [132.577265] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:585:pipe D] attached scaler id 3.0 to PLANE:539 <7> [132.580426] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:641] from all active usage due to RMFB ioctl <7> [132.580499] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:539:plane 4D] because [FB:641] is removed <7> [132.580530] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:585:pipe D] scaler_user index 3.27: Staged freeing scaler id 0 scaler_users = 0x0 <7> [132.580799] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:539:plane 4D] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [132.581029] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:539:plane 4D] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [132.581269] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:539:plane 4D] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.581497] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:539:plane 4D] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.581719] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:539:plane 4D] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.581970] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:585:pipe D] data rate 0 num active planes 0 <7> [132.582214] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [132.588900] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:641] <7> [132.589105] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:585:pipe D] scaler_user index 3.28: staged scaling request for 20x20->1920x1080 scaler_users = 0x10000000 <7> [132.589455] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:549:plane 5D] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.589620] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:549:plane 5D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.589778] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:549:plane 5D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.589935] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:549:plane 5D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [132.590131] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:549:plane 5D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [132.590361] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:585:pipe D] data rate 571000 num active planes 1 <7> [132.590534] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [132.590706] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [132.590898] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:585:pipe D] attached scaler id 3.0 to PLANE:549 <7> [132.597038] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:641] from all active usage due to RMFB ioctl <7> [132.597083] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:549:plane 5D] because [FB:641] is removed <7> [132.597106] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:585:pipe D] scaler_user index 3.28: Staged freeing scaler id 0 scaler_users = 0x0 <7> [132.597354] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:549:plane 5D] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [132.597516] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:549:plane 5D] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [132.597672] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:549:plane 5D] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.597828] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:549:plane 5D] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.597982] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:549:plane 5D] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.598153] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:585:pipe D] data rate 0 num active planes 0 <7> [132.598331] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [132.605479] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:642] <7> [132.605596] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:585:pipe D] scaler_user index 3.29: staged scaling request for 20x20->1920x1080 scaler_users = 0x20000000 <7> [132.605787] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:559:plane 6D] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.605941] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:559:plane 6D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.606087] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:559:plane 6D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.606229] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:559:plane 6D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [132.606428] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:559:plane 6D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [132.606694] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:585:pipe D] data rate 571000 num active planes 1 <7> [132.606938] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [132.607176] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [132.607489] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:585:pipe D] attached scaler id 3.0 to PLANE:559 <7> [132.613676] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:642] from all active usage due to RMFB ioctl <7> [132.613720] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:559:plane 6D] because [FB:642] is removed <7> [132.613742] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:585:pipe D] scaler_user index 3.29: Staged freeing scaler id 0 scaler_users = 0x0 <7> [132.613931] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:559:plane 6D] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [132.614091] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:559:plane 6D] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [132.614260] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:559:plane 6D] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.614490] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:559:plane 6D] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.614720] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:559:plane 6D] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.614981] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:585:pipe D] data rate 0 num active planes 0 <7> [132.615223] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [132.622198] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:641] <7> [132.622341] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:585:pipe D] scaler_user index 3.30: staged scaling request for 20x20->1920x1080 scaler_users = 0x40000000 <7> [132.622542] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:569:plane 7D] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.622707] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:569:plane 7D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [132.622865] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:569:plane 7D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.623023] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:569:plane 7D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 <7> [132.623178] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:569:plane 7D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 <7> [132.623379] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:585:pipe D] data rate 571000 num active planes 1 <7> [132.623558] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571 <7> [132.623721] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [132.623913] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:585:pipe D] attached scaler id 3.0 to PLANE:569 <7> [132.630371] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:641] from all active usage due to RMFB ioctl <7> [132.630412] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:569:plane 7D] because [FB:641] is removed <7> [132.630432] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:585:pipe D] scaler_user index 3.30: Staged freeing scaler id 0 scaler_users = 0x0 <7> [132.630617] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:569:plane 7D] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [132.630769] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:569:plane 7D] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [132.630913] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:569:plane 7D] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.631055] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:569:plane 7D] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.631195] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:569:plane 7D] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.631401] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:585:pipe D] data rate 0 num active planes 0 <7> [132.631567] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <6> [132.639119] [IGT] kms_plane_scaling: finished subtest pipe-D, SUCCESS <6> [132.639808] [IGT] kms_plane_scaling: finished subtest plane-upscale-20x20-with-pixel-format, SUCCESS <7> [132.640896] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [132.641101] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [132.641666] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [132.641910] i915 0000:00:02.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6) <7> [132.642565] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [132.642795] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [132.643446] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [132.644291] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [132.644508] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [132.645147] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [132.645396] i915 0000:00:02.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6) <7> [132.646026] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [132.646247] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [132.646855] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [132.647686] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [132.647907] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [132.648558] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [132.648788] i915 0000:00:02.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6) <7> [132.649453] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [132.649666] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [132.650286] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1) <7> [132.650836] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:641] <6> [132.652227] [IGT] kms_plane_scaling: exiting, ret=0 <7> [132.652729] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc] <7> [132.674774] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:588:HDMI-A-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [132.675152] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24) <7> [132.675517] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:171:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [132.676039] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:587:DDI B/PHY B] [CRTC:171:pipe A] <7> [132.676549] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [132.677054] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [132.677604] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [132.678059] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [132.678474] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040) <7> [132.678857] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [132.679270] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920) <7> [132.679663] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2080) <7> [132.680048] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920) <7> [132.680456] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2080) <7> [132.680830] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 1968) <7> [132.681131] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2000) <7> [132.681456] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080) <7> [132.681760] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080) <7> [132.682062] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1083) <7> [132.682385] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1088) <7> [132.682690] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1144) <7> [132.682994] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1144) <7> [132.683303] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920) <7> [132.683608] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2080) <7> [132.683862] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920) <7> [132.684095] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2080) <7> [132.684334] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1968) <7> [132.684560] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2000) <7> [132.684789] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080) <7> [132.685015] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080) <7> [132.685249] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1083) <7> [132.685479] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1088) <7> [132.685706] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1144) <7> [132.685940] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1144) <7> [132.686171] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [132.686417] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1) <7> [132.686645] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4) <7> [132.686870] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in has_hdmi_sink (expected no, found yes) <7> [132.687101] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in has_infoframe (expected no, found yes) <7> [132.687488] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [132.687715] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 285500) <7> [132.687946] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 285500) <7> [132.688173] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in port_clock (expected 0, found 285500) <7> [132.688420] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in infoframes.enable (expected 0x00000000, found 0x00000071) <7> [132.688649] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in avi infoframe <7> [132.688880] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [132.689108] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [132.689349] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [132.689354] i915 0000:00:02.0: colorspace: RGB <7> [132.689358] i915 0000:00:02.0: scan mode: Underscan <7> [132.689361] i915 0000:00:02.0: colorimetry: No Data <7> [132.689365] i915 0000:00:02.0: picture aspect: No Data <7> [132.689368] i915 0000:00:02.0: active aspect: Same as Picture <7> [132.689371] i915 0000:00:02.0: itc: No Data <7> [132.689375] i915 0000:00:02.0: extended colorimetry: xvYCC 601 <7> [132.689378] i915 0000:00:02.0: quantization range: Full <7> [132.689382] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling <7> [132.689385] i915 0000:00:02.0: video code: 0 <7> [132.689389] i915 0000:00:02.0: ycc quantization range: Full <7> [132.689392] i915 0000:00:02.0: hdmi content type: Graphics <7> [132.689395] i915 0000:00:02.0: pixel repeat: 0 <7> [132.689398] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0 <7> [132.689402] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in spd infoframe <7> [132.689634] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [132.689866] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [132.690096] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [132.690100] i915 0000:00:02.0: vendor: Intel <7> [132.690104] i915 0000:00:02.0: product: Integrated gfx <7> [132.690107] i915 0000:00:02.0: source device information: PC General (0x9) <7> [132.690110] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hdmi infoframe <7> [132.690362] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [132.690593] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [132.690822] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4 <7> [132.690825] i915 0000:00:02.0: empty frame <7> [132.690830] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:171:pipe A] fastset requirement not met, forcing full modeset <7> [132.691061] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.enable (expected yes, found no) <7> [132.691355] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.active (expected yes, found no) <7> [132.691588] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in cpu_transcoder (expected 3, found -1) <7> [132.691817] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in lane_count (expected 4, found 0) <7> [132.692045] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000) <7> [132.692287] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [132.692519] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0) <7> [132.692750] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2080, found 0) <7> [132.692978] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0) <7> [132.693213] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2080, found 0) <7> [132.693467] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 1968, found 0) <7> [132.693694] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2000, found 0) <7> [132.693921] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0) <7> [132.694151] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0) <7> [132.694397] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1083, found 0) <7> [132.694623] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1088, found 0) <7> [132.694849] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1144, found 0) <7> [132.695081] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1144, found 0) <7> [132.695318] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0) <7> [132.695547] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2080, found 0) <7> [132.695774] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0) <7> [132.695999] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2080, found 0) <7> [132.696226] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 1968, found 0) <7> [132.696531] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2000, found 0) <7> [132.696721] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0) <7> [132.696890] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0) <7> [132.697051] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1083, found 0) <7> [132.697210] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1088, found 0) <7> [132.697458] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1144, found 0) <7> [132.697619] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1144, found 0) <7> [132.697793] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [132.697950] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0) <7> [132.698107] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0) <7> [132.698275] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in has_hdmi_sink (expected yes, found no) <7> [132.698443] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in has_infoframe (expected yes, found no) <7> [132.698601] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [132.698757] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 285500, found 0) <7> [132.698912] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 285500, found 0) <7> [132.699066] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in port_clock (expected 285500, found 0) <7> [132.699222] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in infoframes.enable (expected 0x00000071, found 0x00000000) <7> [132.699397] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in avi infoframe <7> [132.699566] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [132.699760] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [132.699764] i915 0000:00:02.0: colorspace: RGB <7> [132.699767] i915 0000:00:02.0: scan mode: Underscan <7> [132.699770] i915 0000:00:02.0: colorimetry: No Data <7> [132.699773] i915 0000:00:02.0: picture aspect: No Data <7> [132.699776] i915 0000:00:02.0: active aspect: Same as Picture <7> [132.699779] i915 0000:00:02.0: itc: No Data <7> [132.699782] i915 0000:00:02.0: extended colorimetry: xvYCC 601 <7> [132.699785] i915 0000:00:02.0: quantization range: Full <7> [132.699788] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling <7> [132.699790] i915 0000:00:02.0: video code: 0 <7> [132.699791] i915 0000:00:02.0: ycc quantization range: Full <7> [132.699793] i915 0000:00:02.0: hdmi content type: Graphics <7> [132.699795] i915 0000:00:02.0: pixel repeat: 0 <7> [132.699796] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0 <7> [132.699798] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [132.699952] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in spd infoframe <7> [132.700114] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [132.700290] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [132.700294] i915 0000:00:02.0: vendor: Intel <7> [132.700295] i915 0000:00:02.0: product: Integrated gfx <7> [132.700297] i915 0000:00:02.0: source device information: PC General (0x9) <7> [132.700299] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [132.700455] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hdmi infoframe <7> [132.700609] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [132.700762] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4 <7> [132.700764] i915 0000:00:02.0: empty frame <7> [132.700766] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [132.700921] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:585:pipe D] fastset requirement not met, forcing full modeset <7> [132.701098] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:585:pipe D] releasing DPLL 0 <7> [132.701365] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:171:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x8 -> 0x1 <7> [132.701536] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:585:pipe D] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x8 -> 0x1 <7> [132.701707] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [132.701861] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:165:cursor A] ddb ( 0 - 0) -> (1993 - 2048), size 0 -> 55 <7> [132.702015] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,*twm, swm, stwm <7> [132.702169] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [132.702376] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 129, 129, 129, 129, 177, 257, 257, 30, 0, 0 <7> [132.702534] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 143, 143, 143, 143, 196, 284, 284, 31, 0, 0 <7> [132.702698] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:579:cursor D] ddb (1993 - 2048) -> ( 0 - 0), size 55 -> 0 <7> [132.702883] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1 <7> [132.703049] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [132.703208] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [132.703407] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:171:pipe A] min cdclk: 0 kHz -> 192000 kHz <7> [132.703593] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:585:pipe D] min cdclk: 192000 kHz -> 0 kHz <7> [132.703781] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 8922 kHz -> 17844 kHz <7> [132.703951] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:171:pipe A] allocated DPLL 0 <7> [132.704124] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:171:pipe A] reserving DPLL 0 <7> [132.704307] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:171:pipe A] enable: yes [modeset] <7> [132.704471] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [132.704631] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7> [132.704822] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [132.704979] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [132.705144] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [132.705321] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [132.705477] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 1, infoframes: 1, infoframes enabled: 0x71 <7> [132.705634] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] GCP: 0x0 <7> [132.705789] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [132.705791] i915 0000:00:02.0: colorspace: RGB <7> [132.705793] i915 0000:00:02.0: scan mode: Underscan <7> [132.705795] i915 0000:00:02.0: colorimetry: No Data <7> [132.705797] i915 0000:00:02.0: picture aspect: No Data <7> [132.705798] i915 0000:00:02.0: active aspect: Same as Picture <7> [132.705800] i915 0000:00:02.0: itc: No Data <7> [132.705801] i915 0000:00:02.0: extended colorimetry: xvYCC 601 <7> [132.705803] i915 0000:00:02.0: quantization range: Full <7> [132.705805] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling <7> [132.705806] i915 0000:00:02.0: video code: 0 <7> [132.705808] i915 0000:00:02.0: ycc quantization range: Full <7> [132.705810] i915 0000:00:02.0: hdmi content type: Graphics <7> [132.705811] i915 0000:00:02.0: pixel repeat: 0 <7> [132.705813] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0 <7> [132.705815] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [132.705817] i915 0000:00:02.0: vendor: Intel <7> [132.705819] i915 0000:00:02.0: product: Integrated gfx <7> [132.705820] i915 0000:00:02.0: source device information: PC General (0x9) <7> [132.705822] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4 <7> [132.705824] i915 0000:00:02.0: empty frame <7> [132.705826] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00 <7> [132.706024] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47 <7> [132.706179] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff <7> [132.706356] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03 00 <7> [132.706522] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2 <7> [132.706677] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [132.706831] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1144, vmax: 1144, flipline: 1144, pipeline full: 61, guardband: 63 vsync start: 0, vsync end: 0 <7> [132.706987] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1144, vmax vtotal: 1144 <7> [132.707142] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [132.707311] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5 <7> [132.707509] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5 <7> [132.707664] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5 <7> [132.707827] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x40 0x5 <7> [132.707992] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5 <7> [132.708149] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 285500, pipe src: 1920x1080+0+0, pixel rate 285500, min cdclk 192000 <7> [132.708316] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 59, ips linetime: 0 <7> [132.708471] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [132.708658] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [132.708812] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [132.708976] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1801be, cfgcr1: 0x488, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [132.709142] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [132.709318] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [132.709478] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [132.709639] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [132.709827] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [132.709986] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [132.710146] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [132.710334] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [132.710490] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [132.710644] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [132.710800] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [132.710989] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [132.711156] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [132.711335] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:635] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [132.711494] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [132.711658] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [132.711813] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7> [132.711966] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7> [132.712149] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7> [132.712327] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7> [132.712488] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:plane 6A] fb: [NOFB], visible: no <7> [132.712650] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:155:plane 7A] fb: [NOFB], visible: no <7> [132.712809] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:165:cursor A] fb: [NOFB], visible: no <7> [132.712969] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:585:pipe D] enable: no [modeset] <7> [132.713126] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:449:plane 1D] fb: [NOFB], visible: no <7> [132.713332] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:479:plane 2D] fb: [NOFB], visible: no <7> [132.713488] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:509:plane 3D] fb: [NOFB], visible: no <7> [132.713651] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:539:plane 4D] fb: [NOFB], visible: no <7> [132.713814] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:549:plane 5D] fb: [NOFB], visible: no <7> [132.713969] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:559:plane 6D] fb: [NOFB], visible: no <7> [132.714123] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:569:plane 7D] fb: [NOFB], visible: no <7> [132.714291] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:579:cursor D] fb: [NOFB], visible: no <7> [132.714664] i915 0000:00:02.0: [drm:intel_audio_codec_disable [i915]] [CONNECTOR:588:HDMI-A-1][ENCODER:587:DDI B/PHY B] Disable audio codec on [CRTC:585:pipe D] <7> [132.730247] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [132.732256] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:588:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10 <7> [132.732901] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [132.733081] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [132.733686] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [132.733849] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:588:HDMI-A-1] Failed to read TMDS config: -6 <7> [132.733866] i915 0000:00:02.0: [drm:intel_ddi_disable [i915]] [CONNECTOR:588:HDMI-A-1] Failed to reset sink scrambling/TMDS bit clock ratio <7> [132.734046] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe D <7> [132.739272] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [132.739472] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x8, on? 1) for [CRTC:585:pipe D] <7> [132.739664] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [132.739839] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:587:DDI B/PHY B] <7> [132.740000] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:597:DDI TC1/PHY TC1] <7> [132.740163] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:599:DP-MST A] <7> [132.740346] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:600:DP-MST B] <7> [132.740510] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:601:DP-MST C] <7> [132.740667] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:602:DP-MST D] <7> [132.740825] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:607:DDI TC2/PHY TC2] <7> [132.741001] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:609:DP-MST A] <7> [132.741173] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:610:DP-MST B] <7> [132.741361] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:611:DP-MST C] <7> [132.741520] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:612:DP-MST D] <7> [132.741681] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:616:DDI TC3/PHY TC3] <7> [132.741836] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:618:DP-MST A] <7> [132.741992] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:619:DP-MST B] <7> [132.742145] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:620:DP-MST C] <7> [132.742339] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:621:DP-MST D] <7> [132.742494] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:625:DDI TC4/PHY TC4] <7> [132.742648] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:627:DP-MST A] <7> [132.742803] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:628:DP-MST B] <7> [132.742956] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:629:DP-MST C] <7> [132.743108] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:630:DP-MST D] <7> [132.743486] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:171:pipe A] <7> [132.743651] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [132.743879] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [132.744128] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [132.744463] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:588:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10 <7> [132.745117] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [132.745287] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [132.745908] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [132.746063] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:588:HDMI-A-1] Failed to read TMDS config: -6 <7> [132.746078] i915 0000:00:02.0: [drm:intel_ddi_enable [i915]] [CONNECTOR:588:HDMI-A-1] Failed to configure sink scrambling/TMDS bit clock ratio <7> [132.749274] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1 <7> [132.749444] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:35:plane 1A] <7> [132.754723] i915 0000:00:02.0: [drm:intel_audio_codec_enable [i915]] [CONNECTOR:588:HDMI-A-1][ENCODER:587:DDI B/PHY B] Enable audio codec on [CRTC:171:pipe A], 64 bytes ELD <7> [132.763074] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] HDMI audio pixel clock setting for 285500 not found, falling back to defaults <7> [132.763272] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] Configuring HDMI audio for pixel clock 25200 (0x00010000) <7> [132.763434] i915 0000:00:02.0: [drm:hsw_audio_config_update [i915]] using automatic N <6> [132.763600] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 5 not expected <6> [132.763603] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 0 not expected <6> [132.763605] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 10 not expected <6> [132.763607] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 6 not expected <7> [132.763756] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:588:HDMI-A-1] <7> [132.764026] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:171:pipe A] <7> [132.764864] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_5 <7> [132.765074] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:585:pipe D] <7> [132.765538] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4 <7> [132.765948] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <6> [132.771533] Console: switching to colour frame buffer device 240x67 <7> [132.773142] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x810 <7> [132.777829] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7> [132.777861] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled

<7> [129.888143] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]

<7> [129.897978] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:598:DP-1]

<7> [129.897987] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:598:DP-1]

<7> [129.898179] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [129.898503] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [129.898751] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [129.898934] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [129.899118] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [129.899319] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [129.899595] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4

<7> [129.903942] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:598:DP-1] disconnected

<7> [129.904355] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:608:DP-2]

<7> [129.904360] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:608:DP-2]

<7> [129.904683] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [129.904942] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:608:DP-2] disconnected

<7> [129.905325] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:617:DP-3]

<7> [129.905329] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:617:DP-3]

<7> [129.905636] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [129.905893] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:617:DP-3] disconnected

<7> [129.906262] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:626:DP-4]

<7> [129.906265] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:626:DP-4]

<7> [129.906578] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [129.906830] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:626:DP-4] disconnected

<7> [129.907418] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:588:HDMI-A-1]

<7> [129.907429] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:588:HDMI-A-1]

<7> [129.934214] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:588:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [129.934225] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:588:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [129.934228] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:588:HDMI-A-1] No deep color support on this HDMI sink.

<7> [129.934231] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:588:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [129.934235] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:588:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [129.934238] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:588:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [129.934243] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:588:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [129.934247] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:588:HDMI-A-1] ELD size 64, SAD count 10

<7> [129.934668] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [129.934812] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [129.935377] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [129.935532] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [129.936341] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:588:HDMI-A-1] probed modes:

<7> [129.936346] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5

<7> [129.936350] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 60 594000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [129.936354] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 60 593407 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [129.936357] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 30 297000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [129.936360] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 30 296703 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [129.936364] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 594000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [129.936367] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 593407 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [129.936370] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 30 297000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [129.936373] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 30 296703 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [129.936377] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 25 297000 3840 4896 4984 5280 2160 2168 2178 2250 0x40 0x5

<7> [129.936380] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 24 297000 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5

<7> [129.936383] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 24 296703 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5

<7> [129.936386] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3440x1440": 90 476140 3440 3448 3480 3520 1440 1441 1449 1503 0x40 0xa

<7> [129.936389] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 75 443250 2560 2768 3048 3536 1600 1603 1609 1672 0x40 0x6

<7> [129.936392] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 60 348500 2560 2752 3032 3504 1600 1603 1609 1658 0x40 0x6

<7> [129.936396] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 120 497770 2560 2608 2640 2720 1440 1443 1448 1525 0x40 0xa

<7> [129.936399] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 60 267027 2048 2200 2424 2800 1536 1537 1540 1589 0x0 0x6

<7> [129.936402] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1080": 120 495000 2560 3108 3152 3300 1080 1084 1089 1250 0x40 0x5

<7> [129.936405] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1080": 120 494505 2560 3108 3152 3300 1080 1084 1089 1250 0x40 0x5

<7> [129.936408] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1440": 75 297000 1920 2064 2288 2640 1440 1441 1444 1500 0x40 0x6

<7> [129.936411] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1440": 60 234000 1920 2048 2256 2600 1440 1441 1444 1500 0x40 0x6

<7> [129.936415] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2160x1200": 90 261420 2160 2208 2240 2320 1200 1203 1208 1252 0x40 0xa

<7> [129.936418] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1856x1392": 75 288000 1856 1984 2208 2560 1392 1393 1396 1500 0x40 0x6

<7> [129.936421] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1856x1392": 60 218250 1856 1952 2176 2528 1392 1393 1396 1439 0x40 0x6

<7> [129.936424] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1792x1344": 75 261000 1792 1888 2104 2456 1344 1345 1348 1417 0x40 0x6

<7> [129.936427] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1792x1344": 60 204750 1792 1920 2120 2448 1344 1345 1348 1394 0x40 0x6

<7> [129.936430] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1152": 60 162000 2048 2074 2154 2250 1152 1153 1156 1200 0x40 0x5

<7> [129.936433] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x40 0xa

<7> [129.936437] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 75 245250 1920 2056 2264 2608 1200 1203 1209 1255 0x40 0x6

<7> [129.936440] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6

<7> [129.936443] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 120 297000 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [129.936446] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 120 296703 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [129.936449] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 75 220597 1920 2056 2264 2608 1080 1081 1084 1128 0x0 0x6

<7> [129.936452] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [129.936455] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [129.936458] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 75 202500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [129.936462] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 70 189000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [129.936465] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 65 175500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [129.936468] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [129.936471] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 75 187000 1680 1800 1976 2272 1050 1053 1059 1099 0x40 0x6

<7> [129.936474] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6

<7> [129.936478] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x945": 60 131481 1680 1784 1960 2240 945 946 949 978 0x0 0x6

<7> [129.936481] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 75 156000 1400 1504 1648 1896 1050 1053 1057 1099 0x40 0x6

<7> [129.936484] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6

<7> [129.936487] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [129.936491] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [129.936494] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [129.936497] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x900": 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6

<7> [129.936500] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x900": 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6

<7> [129.936503] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5

<7> [129.936507] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6

<7> [129.936510] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5

<7> [129.936513] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6

<7> [129.936516] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6

<7> [129.936519] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5

<7> [129.936523] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x768": 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x6

<7> [129.936526] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x768": 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6

<7> [129.936529] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [129.936532] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5

<7> [129.936535] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa

<7> [129.936538] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [129.936541] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46970 1024 1064 1168 1312 576 577 580 597 0x0 0x6

<7> [129.936545] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa

<7> [129.936548] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5

<7> [129.936551] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5

<7> [129.936554] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [129.936557] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [129.936560] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [129.936563] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa

<7> [129.936567] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa

<7> [129.936570] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [129.936573] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [129.936576] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6

<7> [129.936617] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:598:DP-1]

<7> [129.936621] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:598:DP-1]

<7> [129.940959] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:598:DP-1] disconnected

<7> [129.940979] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:608:DP-2]

<7> [129.940983] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:608:DP-2]

<7> [129.941316] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:608:DP-2] disconnected

<7> [129.941330] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:617:DP-3]

<7> [129.941334] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:617:DP-3]

<7> [129.941650] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:617:DP-3] disconnected

<7> [129.941663] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:626:DP-4]

<7> [129.941667] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:626:DP-4]

<7> [129.941981] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:626:DP-4] disconnected

<6> [129.942410] [IGT] kms_plane_scaling: starting subtest plane-upscale-20x20-with-pixel-format

<6> [129.942965] [IGT] kms_plane_scaling: starting dynamic subtest pipe-A

<7> [129.944564] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [129.944735] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [129.945267] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [129.945429] i915 0000:00:02.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6)

<7> [129.945957] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [129.946101] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [129.946628] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [129.947341] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [129.947489] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [129.948029] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [129.948179] i915 0000:00:02.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6)

<7> [129.949053] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [129.949213] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [129.949755] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [129.950458] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [129.950605] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [129.951117] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [129.951345] i915 0000:00:02.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6)

<7> [129.951897] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [129.952038] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [129.952546] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [129.955316] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1

<7> [129.955528] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [129.955688] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 1, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [129.955845] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 16, 129, 129, 129, 129, 177, 257, 257, 30, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [129.955999] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 19, 143, 143, 143, 143, 196, 284, 284, 31, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [129.956178] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 571000 num active planes 1

<7> [129.956370] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [129.956531] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [129.956715] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:35

<7> [129.961062] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:35:plane 1A]

<7> [129.961261] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 10240 bytes of contiguous stolen space for FBC, limit: 2

<7> [129.961424] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:35:plane 1A]

<7> [129.969818] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A

<7> [129.970057] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [129.970101] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:638] is removed

<7> [129.970125] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0

<7> [129.970334] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [129.970494] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [129.970649] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [129.970803] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [129.970956] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [129.971128] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [129.971302] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [129.977728] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:35:plane 1A]

<7> [129.986467] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1

<7> [129.986673] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [129.986838] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [129.986996] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [129.987153] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [129.987332] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [129.987692] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1

<7> [129.987941] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [129.988171] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [129.988430] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [129.988659] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [129.988891] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [129.989197] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1

<7> [129.989461] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [129.989690] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [129.989912] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [129.990138] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [129.990378] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [129.990619] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1

<7> [129.990862] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [129.991096] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [129.991406] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:35

<7> [129.992068] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 20480 bytes of contiguous stolen space for FBC, limit: 1

<7> [129.992324] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:35:plane 1A]

<7> [129.994623] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [129.994694] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:638] is removed

<7> [129.994726] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0

<7> [129.994991] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [129.995231] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [129.995459] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [129.995685] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [129.995912] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [129.996162] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [129.996420] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.002729] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:35:plane 1A]

<7> [130.011601] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1

<7> [130.011809] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.011977] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.012137] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.012311] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.012483] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.012697] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1

<7> [130.012868] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.013023] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.013175] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.013346] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.013499] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.013696] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1

<7> [130.013863] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.014016] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.014167] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.014333] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.014485] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.014651] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1

<7> [130.014816] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [130.014976] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.015166] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:35

<7> [130.019594] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.019636] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:638] is removed

<7> [130.019657] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.019854] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.020018] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.020176] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.020355] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.020511] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.020683] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.020846] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.028171] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1

<7> [130.028421] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.028668] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.028896] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.029120] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0

<7> [130.029404] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0

<7> [130.029659] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 2284000 num active planes 1

<7> [130.029898] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 2284

<7> [130.030135] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.030447] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 17844 kHz -> 35688 kHz

<7> [130.030688] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:35

<7> [130.036288] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.036338] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:638] is removed

<7> [130.036359] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.036543] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.036688] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.036830] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.036971] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.037108] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.037312] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.037560] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.045037] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1

<7> [130.045260] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.045429] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.045585] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.045740] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [130.045894] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [130.046066] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 571000 num active planes 1

<7> [130.046243] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [130.046405] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.046595] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:35

<7> [130.052944] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.052987] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:638] is removed

<7> [130.053009] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.053220] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.053386] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.053544] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.053699] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.053855] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.054029] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.054196] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.061665] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1

<7> [130.061857] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:35:plane 1A] using Y plane [PLANE:145:plane 6A]

<7> [130.062043] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677

<7> [130.062223] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316

<7> [130.062462] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.062693] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.062921] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [130.063151] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [130.063404] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.063642] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.063865] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0

<7> [130.064094] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0

<7> [130.064365] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 856500 num active planes 2

<7> [130.064606] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 857

<7> [130.064849] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.065143] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:35

<7> [130.069607] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.069651] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:638] is removed

<7> [130.069679] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.069875] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 677) -> ( 0 - 0), size 677 -> 0

<7> [130.070037] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 677 - 1993) -> ( 0 - 0), size 1316 -> 0

<7> [130.070197] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.070381] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.070612] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.070840] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.071068] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.071309] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.071538] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.071763] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.072014] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.072259] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.078323] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1

<7> [130.078499] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:35:plane 1A] using Y plane [PLANE:145:plane 6A]

<7> [130.078671] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677

<7> [130.078817] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316

<7> [130.078959] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.079101] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.079268] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.079424] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.079579] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.079731] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.079886] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [130.080038] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [130.080217] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1713000 num active planes 2

<7> [130.080385] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1713

<7> [130.080547] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.080738] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:35

<7> [130.086310] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.086353] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:638] is removed

<7> [130.086378] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.086565] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 677) -> ( 0 - 0), size 677 -> 0

<7> [130.086717] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 677 - 1993) -> ( 0 - 0), size 1316 -> 0

<7> [130.086859] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.087000] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.087139] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.087301] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.087460] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.087614] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.087766] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.087919] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.088095] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.088268] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.094986] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1

<7> [130.095191] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.095382] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.095629] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.095857] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.096087] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.096366] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1

<7> [130.096607] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [130.096843] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.097134] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:35

<7> [130.102883] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.102926] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:638] is removed

<7> [130.102947] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.103133] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.103315] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.103547] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.103776] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.104005] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.104262] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.104502] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.111702] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1

<7> [130.111904] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.112070] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.112240] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.112396] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.112551] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.112724] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1

<7> [130.112888] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [130.113048] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.113245] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:35

<7> [130.119581] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.119625] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:638] is removed

<7> [130.119648] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.119847] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.120015] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.120174] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.120352] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.120513] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.120683] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.120847] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.128871] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1

<7> [130.129096] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.129303] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.129479] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.129654] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.129826] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.130068] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1

<7> [130.130308] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.130487] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.130660] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.130830] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.131006] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.131251] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1

<7> [130.131444] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.131618] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.131789] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.131959] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.132112] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.132306] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1

<7> [130.132479] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [130.132641] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.132836] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:35

<7> [130.136286] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.136334] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:638] is removed

<7> [130.136356] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.136552] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.136716] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.136875] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.137031] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.137186] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.137382] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.137546] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.145006] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1

<7> [130.145229] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.145475] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.145706] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.145935] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0

<7> [130.146165] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0

<7> [130.146515] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1

<7> [130.146760] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.146989] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.147222] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.147445] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0

<7> [130.147668] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0

<7> [130.147972] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: staged scaling request for 20x20->1920x1080 scaler_users = 0x1

<7> [130.148227] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.148451] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.148681] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.148909] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0

<7> [130.149136] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0

<7> [130.149392] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 2284000 num active planes 1

<7> [130.149632] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 2284

<7> [130.149868] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.150153] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:35

<7> [130.152954] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.153024] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:638] is removed

<7> [130.153055] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.153346] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.153579] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.153811] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.154037] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.154268] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.154521] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.154759] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.161528] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: staged scaling request for 20x20->1920x1080 scaler_users = 0x2

<7> [130.161728] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.161896] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.162054] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.162224] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [130.162381] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [130.162554] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 571000 num active planes 1

<7> [130.162717] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [130.162877] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.163066] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:65

<7> [130.169664] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.169709] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:65:plane 2A] because [FB:638] is removed

<7> [130.169731] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.169932] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.170095] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.170285] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.170444] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.170599] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.170771] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.170936] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.178165] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: staged scaling request for 20x20->1920x1080 scaler_users = 0x2

<7> [130.178416] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.178662] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.178893] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.179120] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.179369] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.179625] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1

<7> [130.179869] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [130.180106] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.180410] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:65

<7> [130.186233] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.186275] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:65:plane 2A] because [FB:638] is removed

<7> [130.186296] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.186485] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.186645] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.186802] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.186958] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.187114] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.187320] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.187567] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.194870] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: staged scaling request for 20x20->1920x1080 scaler_users = 0x2

<7> [130.195077] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.195267] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.195428] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.195585] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.195741] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.195916] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1

<7> [130.196118] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [130.196309] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.196504] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:65

<7> [130.202971] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.203015] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:65:plane 2A] because [FB:638] is removed

<7> [130.203037] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.203247] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.203411] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.203569] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.203725] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.203883] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.204060] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.204255] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.211515] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: staged scaling request for 20x20->1920x1080 scaler_users = 0x2

<7> [130.211720] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.211887] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.212044] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.212200] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0

<7> [130.212392] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0

<7> [130.212669] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 2284000 num active planes 1

<7> [130.212923] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 2284

<7> [130.213172] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.213515] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:65

<7> [130.219564] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.219607] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:65:plane 2A] because [FB:638] is removed

<7> [130.219628] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.219821] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.219983] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.220142] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.220320] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.220562] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.220821] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.221064] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.228412] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: staged scaling request for 20x20->1920x1080 scaler_users = 0x2

<7> [130.228599] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.228750] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.228894] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.229035] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [130.229174] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [130.229385] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 571000 num active planes 1

<7> [130.229552] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [130.229712] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.229901] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:65

<7> [130.236326] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.236366] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:65:plane 2A] because [FB:638] is removed

<7> [130.236388] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.236572] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.236722] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.236866] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.237027] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.237195] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.237436] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.237617] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.245173] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: staged scaling request for 20x20->1920x1080 scaler_users = 0x2

<7> [130.245407] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:65:plane 2A] using Y plane [PLANE:145:plane 6A]

<7> [130.245687] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677

<7> [130.245923] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316

<7> [130.246170] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.246445] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.246697] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [130.246944] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [130.247196] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.247474] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.247728] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0

<7> [130.247970] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0

<7> [130.248254] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 856500 num active planes 2

<7> [130.248518] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 857

<7> [130.248774] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.249087] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:65

<7> [130.252984] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.253026] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:65:plane 2A] because [FB:638] is removed

<7> [130.253054] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.253269] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 677) -> ( 0 - 0), size 677 -> 0

<7> [130.253507] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 677 - 1993) -> ( 0 - 0), size 1316 -> 0

<7> [130.253741] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.253967] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.254195] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.254516] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.254743] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.254968] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.255198] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.255450] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.255708] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.255949] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.261689] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: staged scaling request for 20x20->1920x1080 scaler_users = 0x2

<7> [130.261914] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: staged scaling request for 20x20->1920x1080 scaler_users = 0x2

<7> [130.262087] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:65:plane 2A] using Y plane [PLANE:145:plane 6A]

<7> [130.262298] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677

<7> [130.262460] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316

<7> [130.262614] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.262768] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.262922] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.263076] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.263256] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.263417] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.263570] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [130.263723] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [130.263939] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: staged scaling request for 20x20->1920x1080 scaler_users = 0x2

<7> [130.264099] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:65:plane 2A] using Y plane [PLANE:145:plane 6A]

<7> [130.264292] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677

<7> [130.264447] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316

<7> [130.264605] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.264761] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.264914] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.265068] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.265228] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.265380] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.265531] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [130.265682] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [130.265841] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1713000 num active planes 2

<7> [130.266004] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1713

<7> [130.266163] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.266370] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:65

<7> [130.269647] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.269692] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:65:plane 2A] because [FB:638] is removed

<7> [130.269720] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.269917] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 677) -> ( 0 - 0), size 677 -> 0

<7> [130.270083] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 677 - 1993) -> ( 0 - 0), size 1316 -> 0

<7> [130.270258] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.270417] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.270573] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.270728] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.270882] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.271034] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.271187] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.271368] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.271539] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.271701] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.278339] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: staged scaling request for 20x20->1920x1080 scaler_users = 0x2

<7> [130.278572] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.278735] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.278894] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.279052] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.279218] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.279552] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: staged scaling request for 20x20->1920x1080 scaler_users = 0x2

<7> [130.279805] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.280034] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.280278] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.280506] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.280729] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.281040] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: staged scaling request for 20x20->1920x1080 scaler_users = 0x2

<7> [130.281293] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.281519] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.281745] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.281968] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.282189] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.282447] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1

<7> [130.282684] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [130.282925] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.283220] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:65

<7> [130.286314] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.286383] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:65:plane 2A] because [FB:638] is removed

<7> [130.286414] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.286680] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.286909] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.287132] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.287382] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.287609] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.287865] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.288107] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.295044] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: staged scaling request for 20x20->1920x1080 scaler_users = 0x2

<7> [130.295266] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.295435] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.295594] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.295750] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.295906] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.296078] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1

<7> [130.296267] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [130.296429] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.296620] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:65

<7> [130.302969] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.303013] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:65:plane 2A] because [FB:638] is removed

<7> [130.303034] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.303245] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.303409] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.303564] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.303719] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.303874] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.304045] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.304216] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.311759] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: staged scaling request for 20x20->1920x1080 scaler_users = 0x2

<7> [130.311959] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.312125] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.312305] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.312479] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.312634] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.312804] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1

<7> [130.312968] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [130.313128] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.313350] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:65

<7> [130.319664] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.319709] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:65:plane 2A] because [FB:638] is removed

<7> [130.319731] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.319929] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.320094] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.320269] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.320432] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.320586] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.320759] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.320922] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.328333] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: staged scaling request for 20x20->1920x1080 scaler_users = 0x2

<7> [130.328523] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.328676] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.328817] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.328957] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0

<7> [130.329098] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0

<7> [130.329302] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 2284000 num active planes 1

<7> [130.329555] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 2284

<7> [130.329793] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.330078] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:65

<7> [130.336355] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.336400] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:65:plane 2A] because [FB:638] is removed

<7> [130.336422] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.336621] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.336785] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.336943] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.337099] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.337272] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.337557] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.337801] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.344870] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: staged scaling request for 20x20->1920x1080 scaler_users = 0x4

<7> [130.345081] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.345271] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.345435] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.345596] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [130.345755] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [130.345936] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 571000 num active planes 1

<7> [130.346105] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [130.346290] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.346485] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:95

<7> [130.352986] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.353031] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:95:plane 3A] because [FB:638] is removed

<7> [130.353051] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.353268] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.353435] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.353593] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.353747] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.353906] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.354091] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.354306] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.361587] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: staged scaling request for 20x20->1920x1080 scaler_users = 0x4

<7> [130.361789] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.361956] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.362115] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.362300] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.362549] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.362816] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1

<7> [130.363076] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [130.363364] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.363680] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:95

<7> [130.369620] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.369665] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:95:plane 3A] because [FB:638] is removed

<7> [130.369687] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.369884] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.370050] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.370225] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.370456] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.370683] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.370941] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.371180] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.378198] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: staged scaling request for 20x20->1920x1080 scaler_users = 0x4

<7> [130.378422] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.378590] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.378746] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.378901] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.379054] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.379245] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1

<7> [130.379412] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [130.379573] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.379763] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:95

<7> [130.386334] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.386376] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:95:plane 3A] because [FB:638] is removed

<7> [130.386398] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.386594] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.386760] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.386932] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.387099] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.387285] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.387492] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.387670] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.394863] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: staged scaling request for 20x20->1920x1080 scaler_users = 0x4

<7> [130.395066] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.395255] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.395490] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.395717] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0

<7> [130.395980] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0

<7> [130.396368] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: staged scaling request for 20x20->1920x1080 scaler_users = 0x4

<7> [130.396652] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.396908] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.397170] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.397461] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0

<7> [130.397726] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0

<7> [130.398076] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: staged scaling request for 20x20->1920x1080 scaler_users = 0x4

<7> [130.398384] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.398649] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.398906] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.399135] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0

<7> [130.399384] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0

<7> [130.399623] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 2284000 num active planes 1

<7> [130.399864] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 2284

<7> [130.400097] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.400404] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:95

<7> [130.402993] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.403061] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:95:plane 3A] because [FB:638] is removed

<7> [130.403090] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.403389] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.403617] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.403844] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.404070] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.404320] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.404575] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.404811] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.411705] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: staged scaling request for 20x20->1920x1080 scaler_users = 0x4

<7> [130.411911] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.412078] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.412272] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.412434] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [130.412591] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [130.412808] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: staged scaling request for 20x20->1920x1080 scaler_users = 0x4

<7> [130.412981] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.413136] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.413301] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.413454] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [130.413608] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [130.413804] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: staged scaling request for 20x20->1920x1080 scaler_users = 0x4

<7> [130.413968] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.414120] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.414296] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.414449] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [130.414608] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [130.414772] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 571000 num active planes 1

<7> [130.414935] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [130.415097] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.415299] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:95

<7> [130.419635] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.419680] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:95:plane 3A] because [FB:638] is removed

<7> [130.419701] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.419898] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.420061] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.420232] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.420391] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.420546] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.420716] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.420879] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.428328] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: staged scaling request for 20x20->1920x1080 scaler_users = 0x4

<7> [130.428520] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:95:plane 3A] using Y plane [PLANE:145:plane 6A]

<7> [130.428708] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677

<7> [130.428869] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316

<7> [130.429026] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.429180] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.429356] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [130.429601] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [130.429827] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.430053] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.430301] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0

<7> [130.430536] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0

<7> [130.430794] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 856500 num active planes 2

<7> [130.431033] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 857

<7> [130.431279] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.431568] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:95

<7> [130.436271] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.436316] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:95:plane 3A] because [FB:638] is removed

<7> [130.436343] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.436534] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 677) -> ( 0 - 0), size 677 -> 0

<7> [130.436691] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 677 - 1993) -> ( 0 - 0), size 1316 -> 0

<7> [130.436847] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.437001] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.437156] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.437328] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.437482] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.437633] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.437785] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.437935] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.438105] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.438286] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.445145] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: staged scaling request for 20x20->1920x1080 scaler_users = 0x4

<7> [130.445360] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:95:plane 3A] using Y plane [PLANE:145:plane 6A]

<7> [130.445548] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677

<7> [130.445710] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316

<7> [130.445868] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.446024] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.446179] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.446373] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.446530] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.446685] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.446838] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [130.446991] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [130.447182] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1713000 num active planes 2

<7> [130.447380] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1713

<7> [130.447542] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.447734] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:95

<7> [130.452992] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.453041] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:95:plane 3A] because [FB:638] is removed

<7> [130.453071] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.453323] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 677) -> ( 0 - 0), size 677 -> 0

<7> [130.453510] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 677 - 1993) -> ( 0 - 0), size 1316 -> 0

<7> [130.453692] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.453871] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.454055] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.454256] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.454446] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.454634] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.454822] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.455009] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.455234] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.455453] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.461702] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: staged scaling request for 20x20->1920x1080 scaler_users = 0x4

<7> [130.461903] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.462068] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.462247] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.462421] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.462575] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.462746] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1

<7> [130.462911] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [130.463070] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.463290] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:95

<7> [130.469657] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.469703] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:95:plane 3A] because [FB:638] is removed

<7> [130.469725] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.469921] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.470084] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.470261] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.470432] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.470586] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.470759] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.470922] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.478478] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: staged scaling request for 20x20->1920x1080 scaler_users = 0x4

<7> [130.478702] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.478892] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.479073] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.479272] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.479455] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.479654] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1

<7> [130.479842] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [130.480027] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.480279] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:95

<7> [130.486315] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.486361] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:95:plane 3A] because [FB:638] is removed

<7> [130.486382] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.486580] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.486749] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.486936] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.487122] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.487332] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.487533] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.487727] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.495093] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: staged scaling request for 20x20->1920x1080 scaler_users = 0x4

<7> [130.495334] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.495509] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.495670] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.495862] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.496065] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.496331] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1

<7> [130.496552] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [130.496763] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.497011] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:95

<7> [130.502972] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.503020] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:95:plane 3A] because [FB:638] is removed

<7> [130.503042] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.503273] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.503454] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.503621] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.503788] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.503951] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.504133] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.504323] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.511756] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: staged scaling request for 20x20->1920x1080 scaler_users = 0x4

<7> [130.511990] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.512185] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.512399] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.512586] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0

<7> [130.512770] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0

<7> [130.512974] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 2284000 num active planes 1

<7> [130.513171] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 2284

<7> [130.513404] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.513643] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:95

<7> [130.519687] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.519731] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:95:plane 3A] because [FB:638] is removed

<7> [130.519753] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.519967] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.520158] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.520377] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.520565] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.520750] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.520955] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.521148] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.528290] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: staged scaling request for 20x20->1920x1080 scaler_users = 0x8

<7> [130.528495] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.528659] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.528855] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.529060] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [130.529289] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [130.529601] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: staged scaling request for 20x20->1920x1080 scaler_users = 0x8

<7> [130.529822] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.530024] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.530244] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.530463] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [130.530662] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [130.530871] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 571000 num active planes 1

<7> [130.531084] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [130.531315] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.531587] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:125

<7> [130.536359] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.536403] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:125:plane 4A] because [FB:638] is removed

<7> [130.536425] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.536622] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.536785] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.536942] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.537097] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.537289] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.537478] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.537640] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.544851] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: staged scaling request for 20x20->1920x1080 scaler_users = 0x8

<7> [130.545049] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.545241] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.545402] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.545559] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.545713] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.545927] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: staged scaling request for 20x20->1920x1080 scaler_users = 0x8

<7> [130.546094] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.546273] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.546426] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.546577] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.546727] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.546928] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: staged scaling request for 20x20->1920x1080 scaler_users = 0x8

<7> [130.547091] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.547253] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.547406] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.547558] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.547708] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.547867] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1

<7> [130.548028] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [130.548209] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.548428] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:125

<7> [130.553038] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.553082] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:125:plane 4A] because [FB:638] is removed

<7> [130.553103] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.553343] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.553507] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.553664] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.553818] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.553971] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.554140] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.554320] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.561596] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: staged scaling request for 20x20->1920x1080 scaler_users = 0x8

<7> [130.561779] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.561931] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.562077] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.562233] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.562408] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.562582] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1

<7> [130.562746] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [130.562919] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.563120] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:125

<7> [130.569653] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.569696] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:125:plane 4A] because [FB:638] is removed

<7> [130.569718] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.569915] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.570078] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.570255] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.570438] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.570594] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.570766] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.570928] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.578412] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: staged scaling request for 20x20->1920x1080 scaler_users = 0x8

<7> [130.578598] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.578749] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.578895] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.579036] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [130.579175] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [130.579400] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 571000 num active planes 1

<7> [130.579581] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [130.579742] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.579964] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:125

<7> [130.586369] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.586415] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:125:plane 4A] because [FB:638] is removed

<7> [130.586438] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.586642] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.586811] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.586972] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.587132] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.587334] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.587531] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.587700] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.595189] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: staged scaling request for 20x20->1920x1080 scaler_users = 0x8

<7> [130.595442] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:125:plane 4A] using Y plane [PLANE:145:plane 6A]

<7> [130.595663] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677

<7> [130.595854] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316

<7> [130.596037] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.596263] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.596467] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [130.596649] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [130.596830] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.597010] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.597191] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0

<7> [130.597397] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0

<7> [130.597606] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 856500 num active planes 2

<7> [130.597800] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 857

<7> [130.597979] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.598194] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:125

<7> [130.603034] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.603079] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:125:plane 4A] because [FB:638] is removed

<7> [130.603105] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.603334] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 677) -> ( 0 - 0), size 677 -> 0

<7> [130.603498] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 677 - 1993) -> ( 0 - 0), size 1316 -> 0

<7> [130.603657] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.603811] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.603991] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.604143] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.604313] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.604467] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.604620] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.604774] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.604943] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.605105] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.611695] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: staged scaling request for 20x20->1920x1080 scaler_users = 0x8

<7> [130.611885] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:125:plane 4A] using Y plane [PLANE:145:plane 6A]

<7> [130.612069] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677

<7> [130.612246] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316

<7> [130.612443] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.612598] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.612752] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.612904] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.613056] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.613209] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.613384] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [130.613549] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [130.613721] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1713000 num active planes 2

<7> [130.613883] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1713

<7> [130.614045] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.614262] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:125

<7> [130.619940] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.619987] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:125:plane 4A] because [FB:638] is removed

<7> [130.620015] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.620235] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 677) -> ( 0 - 0), size 677 -> 0

<7> [130.620411] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 677 - 1993) -> ( 0 - 0), size 1316 -> 0

<7> [130.620569] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.620725] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.620881] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.621034] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.621189] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.621399] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.621555] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.621708] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.621882] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.622045] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.628416] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: staged scaling request for 20x20->1920x1080 scaler_users = 0x8

<7> [130.628616] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.628780] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.628938] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.629094] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.629265] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.629442] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1

<7> [130.629607] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [130.629768] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.629959] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:125

<7> [130.636337] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.636382] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:125:plane 4A] because [FB:638] is removed

<7> [130.636403] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.636599] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.636765] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.636924] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.637081] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.637248] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.637422] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.637585] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.645257] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: staged scaling request for 20x20->1920x1080 scaler_users = 0x8

<7> [130.645489] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.645657] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.645819] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.645981] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.646139] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.646349] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1

<7> [130.646526] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [130.646690] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.646890] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:125

<7> [130.653000] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.653045] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:125:plane 4A] because [FB:638] is removed

<7> [130.653068] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.653297] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.653466] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.653624] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.653781] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.653938] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.654108] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.654341] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.661823] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: staged scaling request for 20x20->1920x1080 scaler_users = 0x8

<7> [130.662043] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.662244] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.662419] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.662589] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.662756] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.662989] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: staged scaling request for 20x20->1920x1080 scaler_users = 0x8

<7> [130.663169] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.663374] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.663540] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.663706] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.663880] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.664124] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: staged scaling request for 20x20->1920x1080 scaler_users = 0x8

<7> [130.664366] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.664551] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.664733] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.664913] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.665094] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.665310] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1

<7> [130.665504] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [130.665699] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.665924] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:125

<7> [130.669701] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.669744] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:125:plane 4A] because [FB:638] is removed

<7> [130.669765] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.669962] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.670126] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.670300] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.670482] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.670637] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.670809] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.670976] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.678348] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: staged scaling request for 20x20->1920x1080 scaler_users = 0x10

<7> [130.678550] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.678716] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.678875] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.679032] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [130.679185] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [130.679487] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: staged scaling request for 20x20->1920x1080 scaler_users = 0x10

<7> [130.679747] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.679975] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.680196] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.680448] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [130.680607] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [130.680823] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: staged scaling request for 20x20->1920x1080 scaler_users = 0x10

<7> [130.680990] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.681145] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.681351] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.681575] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [130.681798] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [130.682032] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 571000 num active planes 1

<7> [130.682275] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [130.682481] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.682675] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:135

<7> [130.686372] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.686416] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:135:plane 5A] because [FB:638] is removed

<7> [130.686436] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.686626] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.686787] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.686944] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.687100] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.687276] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.687534] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.687777] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.694938] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: staged scaling request for 20x20->1920x1080 scaler_users = 0x10

<7> [130.695142] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.695324] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.695510] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.695666] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.695822] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.695997] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1

<7> [130.696163] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [130.696357] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.696578] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:135

<7> [130.703037] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.703081] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:135:plane 5A] because [FB:638] is removed

<7> [130.703103] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.703353] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.703537] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.703694] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.703851] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.704005] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.704175] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.704361] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.711587] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: staged scaling request for 20x20->1920x1080 scaler_users = 0x10

<7> [130.711776] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.711941] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.712100] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.712290] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.712517] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.712773] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1

<7> [130.713012] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [130.713259] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.713471] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:135

<7> [130.719765] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.719810] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:135:plane 5A] because [FB:638] is removed

<7> [130.719830] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.720028] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.720191] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.720393] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.720625] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.720855] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.721160] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.721484] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.728473] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: staged scaling request for 20x20->1920x1080 scaler_users = 0x10

<7> [130.728678] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.728851] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.729013] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.729172] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [130.729357] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [130.729576] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 571000 num active planes 1

<7> [130.729743] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [130.729944] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.730200] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:135

<7> [130.736405] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.736452] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:135:plane 5A] because [FB:638] is removed

<7> [130.736475] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.736688] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.736868] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.737040] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.737210] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.737439] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.737658] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.737837] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.745140] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: staged scaling request for 20x20->1920x1080 scaler_users = 0x10

<7> [130.745405] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:135:plane 5A] using Y plane [PLANE:145:plane 6A]

<7> [130.745729] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677

<7> [130.746008] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316

<7> [130.746297] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.746552] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.746739] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [130.746921] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [130.747103] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.747355] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.747622] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0

<7> [130.747892] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0

<7> [130.748168] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 856500 num active planes 2

<7> [130.748452] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 857

<7> [130.748655] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.748865] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:135

<7> [130.753035] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.753080] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:135:plane 5A] because [FB:638] is removed

<7> [130.753106] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.753339] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 677) -> ( 0 - 0), size 677 -> 0

<7> [130.753571] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 677 - 1993) -> ( 0 - 0), size 1316 -> 0

<7> [130.753801] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.754032] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.754266] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.754424] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.754580] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.754733] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.754918] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.755144] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.755414] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.755654] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.761755] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: staged scaling request for 20x20->1920x1080 scaler_users = 0x10

<7> [130.761943] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:135:plane 5A] using Y plane [PLANE:145:plane 6A]

<7> [130.762129] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677

<7> [130.762340] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316

<7> [130.762576] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.762803] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.763031] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.763262] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.763442] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.763597] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.763753] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [130.763906] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [130.764147] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1713000 num active planes 2

<7> [130.764406] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1713

<7> [130.764643] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.764926] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:135

<7> [130.769733] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.769779] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:135:plane 5A] because [FB:638] is removed

<7> [130.769807] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.770007] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 677) -> ( 0 - 0), size 677 -> 0

<7> [130.770175] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 677 - 1993) -> ( 0 - 0), size 1316 -> 0

<7> [130.770369] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.770601] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.770836] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.771062] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.771346] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.771540] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.771702] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.771859] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.772034] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.772243] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.778398] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: staged scaling request for 20x20->1920x1080 scaler_users = 0x10

<7> [130.778588] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.778739] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.778885] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.779026] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.779165] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.779360] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1

<7> [130.779555] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [130.779715] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.779907] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:135

<7> [130.786388] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.786449] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:135:plane 5A] because [FB:638] is removed

<7> [130.786477] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.786740] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.786892] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.787033] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.787173] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.787363] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.787536] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.787699] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.795143] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: staged scaling request for 20x20->1920x1080 scaler_users = 0x10

<7> [130.795385] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.795626] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.795853] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.796083] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.796332] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.796614] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: staged scaling request for 20x20->1920x1080 scaler_users = 0x10

<7> [130.796787] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.796947] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.797104] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.797319] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.797544] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.797859] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: staged scaling request for 20x20->1920x1080 scaler_users = 0x10

<7> [130.798110] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.798359] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.798520] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.798680] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.798840] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.799010] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1

<7> [130.799254] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [130.799491] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.799783] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:135

<7> [130.803013] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.803056] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:135:plane 5A] because [FB:638] is removed

<7> [130.803077] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.803296] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.803534] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.803764] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.803989] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.804206] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.804405] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.804569] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.811758] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: staged scaling request for 20x20->1920x1080 scaler_users = 0x10

<7> [130.811961] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.812127] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.812305] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.812497] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.812651] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.812869] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: staged scaling request for 20x20->1920x1080 scaler_users = 0x10

<7> [130.813035] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.813190] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.813367] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.813547] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.813701] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.813899] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: staged scaling request for 20x20->1920x1080 scaler_users = 0x10

<7> [130.814062] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.814227] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.814409] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.814566] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.814721] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.814883] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1

<7> [130.815047] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [130.815208] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.815437] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:135

<7> [130.819678] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.819720] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:135:plane 5A] because [FB:638] is removed

<7> [130.819741] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.819924] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.820080] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.820268] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.820442] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.820598] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.820772] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.820936] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.828279] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.5: staged scaling request for 20x20->1920x1080 scaler_users = 0x20

<7> [130.828575] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.828808] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.829030] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.829243] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [130.829400] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [130.829574] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 571000 num active planes 1

<7> [130.829738] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [130.829960] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.830260] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:145

<7> [130.836342] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.836385] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:145:plane 6A] because [FB:638] is removed

<7> [130.836407] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.5: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.836599] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.836761] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.836918] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.837073] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.837255] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.837509] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.837747] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.844896] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.5: staged scaling request for 20x20->1920x1080 scaler_users = 0x20

<7> [130.845096] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.845283] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.845453] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.845608] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.845764] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.845936] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1

<7> [130.846100] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [130.846280] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.846486] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:145

<7> [130.853048] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.853092] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:145:plane 6A] because [FB:638] is removed

<7> [130.853114] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.5: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.853360] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.853530] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.853687] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.853843] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.853998] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.854171] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.854359] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.861571] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.5: staged scaling request for 20x20->1920x1080 scaler_users = 0x20

<7> [130.861779] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.861975] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.862161] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.862394] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.862672] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.862974] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1

<7> [130.863270] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [130.863551] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.863792] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:145

<7> [130.869723] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.869769] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:145:plane 6A] because [FB:638] is removed

<7> [130.869790] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.5: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.869989] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.870150] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.870362] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.870597] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.870825] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.871119] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.871447] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.878419] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.5: staged scaling request for 20x20->1920x1080 scaler_users = 0x20

<7> [130.878637] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.878821] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.878997] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.879167] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [130.879367] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [130.879577] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 571000 num active planes 1

<7> [130.879754] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [130.879967] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.880247] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:145

<7> [130.886410] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.886461] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:145:plane 6A] because [FB:638] is removed

<7> [130.886484] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.5: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.886698] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.886878] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.887051] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.887243] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.887434] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.887619] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.887795] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.895125] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.5: staged scaling request for 20x20->1920x1080 scaler_users = 0x20

<7> [130.895416] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.895713] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.895990] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.896288] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.896555] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.896769] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1

<7> [130.896969] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [130.897186] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.897579] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:145

<7> [130.903056] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.903101] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:145:plane 6A] because [FB:638] is removed

<7> [130.903124] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.5: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.903372] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.903607] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.903836] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.904118] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.904425] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.904647] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.904856] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.911773] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.5: staged scaling request for 20x20->1920x1080 scaler_users = 0x20

<7> [130.911993] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.912175] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.912380] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.912569] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.912737] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.912954] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1

<7> [130.913184] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [130.913445] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.913736] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:145

<7> [130.919740] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.919789] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:145:plane 6A] because [FB:638] is removed

<7> [130.919812] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.5: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.920023] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.920200] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.920404] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.920590] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.920761] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.920950] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.921127] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.928442] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.5: staged scaling request for 20x20->1920x1080 scaler_users = 0x20

<7> [130.928681] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.928879] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.929067] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.929274] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.929547] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.929934] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.5: staged scaling request for 20x20->1920x1080 scaler_users = 0x20

<7> [130.930232] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.930502] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.930720] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.930910] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.931104] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.931453] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.5: staged scaling request for 20x20->1920x1080 scaler_users = 0x20

<7> [130.931763] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.932051] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.932360] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.932640] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.932835] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.933041] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1

<7> [130.933282] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [130.933581] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.933947] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:145

<7> [130.936350] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.936390] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:145:plane 6A] because [FB:638] is removed

<7> [130.936410] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.5: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.936594] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:plane 6A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.936755] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.936911] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.937066] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.937233] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:145:plane 6A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.937489] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.937733] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.944895] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.6: staged scaling request for 20x20->1920x1080 scaler_users = 0x40

<7> [130.945091] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:155:plane 7A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.945280] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.945450] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.945606] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [130.945761] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [130.945988] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.6: staged scaling request for 20x20->1920x1080 scaler_users = 0x40

<7> [130.946153] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:155:plane 7A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.946326] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.946489] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.946641] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [130.946791] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [130.946998] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.6: staged scaling request for 20x20->1920x1080 scaler_users = 0x40

<7> [130.947161] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:155:plane 7A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.947332] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.947496] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.947650] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [130.947807] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [130.947970] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 571000 num active planes 1

<7> [130.948134] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [130.948312] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.948520] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:155

<7> [130.953071] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.953115] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:155:plane 7A] because [FB:638] is removed

<7> [130.953135] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.953379] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:155:plane 7A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.953543] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.953702] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.953857] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.954012] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.954183] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.954371] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.961593] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.6: staged scaling request for 20x20->1920x1080 scaler_users = 0x40

<7> [130.961797] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:155:plane 7A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.961962] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.962120] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.962306] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.962555] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.962809] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1

<7> [130.963049] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [130.963296] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.963498] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:155

<7> [130.965289] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [130.965283] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [130.965279] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [130.965355] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [130.965474] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [130.965652] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4

<7> [130.969723] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.969765] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:155:plane 7A] because [FB:638] is removed

<7> [130.969787] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.970021] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:155:plane 7A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.970183] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.970363] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.970596] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.970827] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.971087] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.971351] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.978336] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.6: staged scaling request for 20x20->1920x1080 scaler_users = 0x40

<7> [130.978537] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:155:plane 7A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.978702] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.978862] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.979020] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [130.979175] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [130.979399] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1

<7> [130.979580] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [130.979741] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.979933] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:155

<7> [130.986396] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [130.986441] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:155:plane 7A] because [FB:638] is removed

<7> [130.986462] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [130.986661] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:155:plane 7A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [130.986825] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.986984] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.987141] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.987316] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.987514] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [130.987677] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [130.995160] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.6: staged scaling request for 20x20->1920x1080 scaler_users = 0x40

<7> [130.995422] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:155:plane 7A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [130.995663] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [130.995891] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [130.996121] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [130.996359] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [130.996581] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 571000 num active planes 1

<7> [130.996745] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [130.996911] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [130.997119] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:155

<7> [131.003083] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [131.003133] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:155:plane 7A] because [FB:638] is removed

<7> [131.003156] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.003439] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:155:plane 7A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.003713] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.003977] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.004250] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.004507] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.004709] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [131.004897] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.011848] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.6: staged scaling request for 20x20->1920x1080 scaler_users = 0x40

<7> [131.012097] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:155:plane 7A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.012336] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.012554] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.012751] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.012947] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.013167] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1

<7> [131.013413] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [131.013633] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.013874] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:155

<7> [131.019699] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [131.019745] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:155:plane 7A] because [FB:638] is removed

<7> [131.019767] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.019964] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:155:plane 7A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.020128] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.020307] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.020493] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.020651] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.020875] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [131.021092] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.028498] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.6: staged scaling request for 20x20->1920x1080 scaler_users = 0x40

<7> [131.028714] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:155:plane 7A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.028895] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.029065] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.029276] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.029536] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.029818] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1

<7> [131.030159] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [131.030517] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.030833] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:155

<7> [131.036391] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [131.036439] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:155:plane 7A] because [FB:638] is removed

<7> [131.036462] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.036665] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:155:plane 7A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.036839] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.037010] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.037179] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.037376] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.037655] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [131.037914] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.045240] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.6: staged scaling request for 20x20->1920x1080 scaler_users = 0x40

<7> [131.045501] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:155:plane 7A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.045701] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.045893] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.046084] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.046300] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.046535] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1

<7> [131.046739] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [131.046935] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.047168] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:171:pipe A] attached scaler id 0.0 to PLANE:155

<7> [131.053097] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [131.053142] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:155:plane 7A] because [FB:638] is removed

<7> [131.053164] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:171:pipe A] scaler_user index 0.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.053397] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:155:plane 7A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.053572] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.053730] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.053887] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.054073] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:155:plane 7A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.054326] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 0 num active planes 0

<7> [131.054521] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<6> [131.061824] [IGT] kms_plane_scaling: finished subtest pipe-A, SUCCESS

<6> [131.062604] [IGT] kms_plane_scaling: starting dynamic subtest pipe-B

<7> [131.065196] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [131.065544] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [131.066248] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [131.066612] i915 0000:00:02.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6)

<7> [131.067409] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [131.067757] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [131.068566] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [131.069557] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [131.069851] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [131.070542] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [131.070832] i915 0000:00:02.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6)

<7> [131.071525] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [131.071801] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [131.072472] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [131.073345] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [131.073568] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [131.074181] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [131.074425] i915 0000:00:02.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6)

<7> [131.075054] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [131.075279] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [131.075888] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [131.079363] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:588:HDMI-A-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [131.079625] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24)

<7> [131.079860] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:309:pipe B] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [131.080098] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:587:DDI B/PHY B] [CRTC:309:pipe B]

<7> [131.080344] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [131.080584] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [131.080792] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [131.080953] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [131.081115] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000)

<7> [131.081301] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [131.081501] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)

<7> [131.081732] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2080, found 0)

<7> [131.081960] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)

<7> [131.082189] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2080, found 0)

<7> [131.082444] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 1968, found 0)

<7> [131.082613] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2000, found 0)

<7> [131.082768] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)

<7> [131.082924] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)

<7> [131.083087] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1083, found 0)

<7> [131.083328] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1088, found 0)

<7> [131.083560] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1144, found 0)

<7> [131.083792] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1144, found 0)

<7> [131.084017] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)

<7> [131.084192] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2080, found 0)

<7> [131.084366] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)

<7> [131.084520] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2080, found 0)

<7> [131.084688] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 1968, found 0)

<7> [131.084916] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2000, found 0)

<7> [131.085146] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)

<7> [131.085470] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)

<7> [131.085695] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1083, found 0)

<7> [131.085864] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1088, found 0)

<7> [131.086022] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1144, found 0)

<7> [131.086179] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1144, found 0)

<7> [131.086374] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [131.086607] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)

<7> [131.086838] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0)

<7> [131.087069] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in has_hdmi_sink (expected yes, found no)

<7> [131.087311] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in has_infoframe (expected yes, found no)

<7> [131.087482] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [131.087638] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 285500, found 0)

<7> [131.087791] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 285500, found 0)

<7> [131.087962] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in port_clock (expected 285500, found 0)

<7> [131.088193] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in infoframes.enable (expected 0x00000071, found 0x00000000)

<7> [131.088446] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in avi infoframe

<7> [131.088678] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [131.088899] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [131.088925] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling

<7> [131.088938] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0

<7> [131.088942] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [131.089121] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in spd infoframe

<7> [131.089291] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [131.089445] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [131.089450] i915 0000:00:02.0: source device information: PC General (0x9)

<7> [131.089452] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [131.089606] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hdmi infoframe

<7> [131.089827] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [131.090055] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4

<7> [131.090061] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [131.090303] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:171:pipe A] fastset requirement not met, forcing full modeset

<7> [131.090529] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.enable (expected no, found yes)

<7> [131.090761] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [131.090990] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in cpu_transcoder (expected -1, found 1)

<7> [131.091183] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in lane_count (expected 0, found 4)

<7> [131.091356] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040)

<7> [131.091512] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [131.091666] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)

<7> [131.091863] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2080)

<7> [131.092099] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)

<7> [131.092349] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2080)

<7> [131.092580] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 1968)

<7> [131.092798] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2000)

<7> [131.092955] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)

<7> [131.093111] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)

<7> [131.093284] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1083)

<7> [131.093488] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1088)

<7> [131.093719] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1144)

<7> [131.093947] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1144)

<7> [131.094174] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)

<7> [131.094420] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2080)

<7> [131.094608] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)

<7> [131.094763] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2080)

<7> [131.094917] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1968)

<7> [131.095072] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2000)

<7> [131.095362] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)

<7> [131.095538] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)

<7> [131.095703] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1083)

<7> [131.095865] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1088)

<7> [131.096023] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1144)

<7> [131.096181] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1144)

<7> [131.096356] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [131.096514] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)

<7> [131.096672] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4)

<7> [131.096827] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in has_hdmi_sink (expected no, found yes)

<7> [131.096983] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in has_infoframe (expected no, found yes)

<7> [131.097139] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [131.097306] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 285500)

<7> [131.097463] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 285500)

<7> [131.097618] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in port_clock (expected 0, found 285500)

<7> [131.097773] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in infoframes.enable (expected 0x00000000, found 0x00000071)

<7> [131.097928] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in avi infoframe

<7> [131.098081] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [131.098241] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [131.098396] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [131.098411] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling

<7> [131.098418] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0

<7> [131.098420] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in spd infoframe

<7> [131.098574] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [131.098728] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [131.098881] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [131.098887] i915 0000:00:02.0: source device information: PC General (0x9)

<7> [131.098888] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hdmi infoframe

<7> [131.099042] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [131.099196] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [131.099364] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4

<7> [131.099368] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:309:pipe B] fastset requirement not met, forcing full modeset

<7> [131.099576] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:171:pipe A] releasing DPLL 0

<7> [131.099767] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: staged scaling request for 20x20->1920x1080 scaler_users = 0x100

<7> [131.099965] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:171:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x2

<7> [131.100134] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:309:pipe B] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x2

<7> [131.100313] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:165:cursor A] ddb (1993 - 2048) -> ( 0 - 0), size 55 -> 0

<7> [131.100470] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.100624] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:303:cursor B] ddb ( 0 - 0) -> (1993 - 2048), size 0 -> 55

<7> [131.100794] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.100974] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.101137] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [131.101307] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [131.101497] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 571000 num active planes 1

<7> [131.101660] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [131.101819] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.102032] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:171:pipe A] min cdclk: 192000 kHz -> 0 kHz

<7> [131.102191] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:309:pipe B] min cdclk: 0 kHz -> 192000 kHz

<7> [131.102395] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 35688 kHz -> 8922 kHz

<7> [131.102567] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:309:pipe B] allocated DPLL 0

<7> [131.102730] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:309:pipe B] reserving DPLL 0

<7> [131.102892] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:173

<7> [131.103051] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:171:pipe A] enable: no [modeset]

<7> [131.103267] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no

<7> [131.103429] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no

<7> [131.103596] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no

<7> [131.103763] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no

<7> [131.103920] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no

<7> [131.104075] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:plane 6A] fb: [NOFB], visible: no

<7> [131.104247] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:155:plane 7A] fb: [NOFB], visible: no

<7> [131.104428] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:165:cursor A] fb: [NOFB], visible: no

<7> [131.104590] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:309:pipe B] enable: yes [modeset]

<7> [131.104745] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [131.104908] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: B, pipe bpp: 24, dithering: 0

<7> [131.105062] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [131.105216] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [131.105408] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [131.105575] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [131.105737] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 1, infoframes: 1, infoframes enabled: 0x71

<7> [131.105892] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] GCP: 0x0

<7> [131.106055] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [131.106070] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling

<7> [131.106078] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0

<7> [131.106080] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [131.106085] i915 0000:00:02.0: source device information: PC General (0x9)

<7> [131.106087] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4

<7> [131.106090] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00

<7> [131.106253] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47

<7> [131.106406] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff

<7> [131.106559] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03 00

<7> [131.106736] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2

<7> [131.106907] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [131.107071] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1144, vmax: 1144, flipline: 1144, pipeline full: 61, guardband: 63 vsync start: 0, vsync end: 0

<7> [131.107241] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1144, vmax vtotal: 1144

<7> [131.107410] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [131.107568] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5

<7> [131.107725] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5

<7> [131.107914] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5

<7> [131.108071] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x40 0x5

<7> [131.108247] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5

<7> [131.108410] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 285500, pipe src: 1920x1080+0+0, pixel rate 285500, min cdclk 192000

<7> [131.108565] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 59, ips linetime: 0

<7> [131.108720] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x100, scaler_id: -1, scaling_filter: 0

<7> [131.108875] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [131.109054] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [131.109236] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1801be, cfgcr1: 0x488, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [131.109402] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [131.109557] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [131.109722] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [131.109875] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [131.110029] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [131.110209] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [131.110386] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [131.110547] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [131.110701] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [131.110860] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [131.111013] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [131.111165] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [131.111368] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [131.111522] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:173:plane 1B] fb: [FB:638] 20x20 format = RG16 little-endian (0x36314752) modifier = 0x0, visible: yes

<7> [131.111686] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: 0, scaling_filter: 0

<7> [131.111848] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 20.000000x20.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [131.112002] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:203:plane 2B] fb: [NOFB], visible: no

<7> [131.112156] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:233:plane 3B] fb: [NOFB], visible: no

<7> [131.112329] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:263:plane 4B] fb: [NOFB], visible: no

<7> [131.112490] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:273:plane 5B] fb: [NOFB], visible: no

<7> [131.112690] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:283:plane 6B] fb: [NOFB], visible: no

<7> [131.112847] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:293:plane 7B] fb: [NOFB], visible: no

<7> [131.113012] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:303:cursor B] fb: [NOFB], visible: no

<7> [131.113447] i915 0000:00:02.0: [drm:intel_audio_codec_disable [i915]] [CONNECTOR:588:HDMI-A-1][ENCODER:587:DDI B/PHY B] Disable audio codec on [CRTC:171:pipe A]

<7> [131.127972] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [131.132236] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:588:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10

<7> [131.132791] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [131.132945] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [131.133490] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [131.133650] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:588:HDMI-A-1] Failed to read TMDS config: -6

<7> [131.133666] i915 0000:00:02.0: [drm:intel_ddi_disable [i915]] [CONNECTOR:588:HDMI-A-1] Failed to reset sink scrambling/TMDS bit clock ratio

<7> [131.133854] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [131.136918] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [131.137125] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:171:pipe A]

<7> [131.137333] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [131.137513] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:587:DDI B/PHY B]

<7> [131.137677] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:597:DDI TC1/PHY TC1]

<7> [131.137857] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:599:DP-MST A]

<7> [131.138032] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:600:DP-MST B]

<7> [131.138198] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:601:DP-MST C]

<7> [131.138381] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:602:DP-MST D]

<7> [131.138549] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:607:DDI TC2/PHY TC2]

<7> [131.138709] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:609:DP-MST A]

<7> [131.138867] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:610:DP-MST B]

<7> [131.139024] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:611:DP-MST C]

<7> [131.139237] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:612:DP-MST D]

<7> [131.139393] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:616:DDI TC3/PHY TC3]

<7> [131.139557] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:618:DP-MST A]

<7> [131.139722] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:619:DP-MST B]

<7> [131.139877] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:620:DP-MST C]

<7> [131.140032] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:621:DP-MST D]

<7> [131.140188] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:625:DDI TC4/PHY TC4]

<7> [131.140390] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:627:DP-MST A]

<7> [131.140546] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:628:DP-MST B]

<7> [131.140707] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:629:DP-MST C]

<7> [131.140868] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:630:DP-MST D]

<7> [131.141022] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:598:DP-1]

<7> [131.141211] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:608:DP-2]

<7> [131.141518] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:617:DP-3]

<7> [131.141718] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:626:DP-4]

<7> [131.142060] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x2, on? 0) for [CRTC:309:pipe B]

<7> [131.142419] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [131.142655] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [131.142909] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe B

<7> [131.143652] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:588:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10

<7> [131.144255] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [131.144404] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [131.144930] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [131.145115] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:588:HDMI-A-1] Failed to read TMDS config: -6

<7> [131.145131] i915 0000:00:02.0: [drm:intel_ddi_enable [i915]] [CONNECTOR:588:HDMI-A-1] Failed to configure sink scrambling/TMDS bit clock ratio

<7> [131.153853] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:171:pipe A]

<7> [131.154239] i915 0000:00:02.0: [drm:intel_audio_codec_enable [i915]] [CONNECTOR:588:HDMI-A-1][ENCODER:587:DDI B/PHY B] Enable audio codec on [CRTC:309:pipe B], 64 bytes ELD

<7> [131.162170] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] HDMI audio pixel clock setting for 285500 not found, falling back to defaults

<7> [131.162379] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] Configuring HDMI audio for pixel clock 25200 (0x00010000)

<7> [131.162526] i915 0000:00:02.0: [drm:hsw_audio_config_update [i915]] using automatic N

<6> [131.162677] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 5 not expected

<6> [131.162680] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 0 not expected

<6> [131.162681] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 10 not expected

<6> [131.162683] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 6 not expected

<7> [131.162815] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:588:HDMI-A-1]

<7> [131.163051] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:309:pipe B]

<7> [131.164517] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe B

<7> [131.164730] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:638] from all active usage due to RMFB ioctl

<7> [131.164776] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:173:plane 1B] because [FB:638] is removed

<7> [131.164802] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.164993] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.165151] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.165329] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.165516] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.165670] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.165847] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.166023] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.170927] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: staged scaling request for 20x20->1920x1080 scaler_users = 0x100

<7> [131.171135] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.171324] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.171556] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.171789] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.172020] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.172362] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: staged scaling request for 20x20->1920x1080 scaler_users = 0x100

<7> [131.172607] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.172830] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.173051] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.173294] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.173521] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.173829] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: staged scaling request for 20x20->1920x1080 scaler_users = 0x100

<7> [131.174074] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.174317] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.174540] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.174770] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.174993] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.175238] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1

<7> [131.175476] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [131.175708] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.175998] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 8922 kHz -> 17844 kHz

<7> [131.176245] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:173

<7> [131.176518] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x810

<7> [131.179012] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.179086] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:173:plane 1B] because [FB:639] is removed

<7> [131.179120] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.179492] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.179735] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.179961] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.180188] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.180440] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.180696] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.180936] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.181374] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL

<7> [131.181406] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled

<7> [131.187518] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: staged scaling request for 20x20->1920x1080 scaler_users = 0x100

<7> [131.187735] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.187902] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.188062] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.188234] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.188399] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.188574] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1

<7> [131.188738] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [131.188900] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.189093] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:173

<7> [131.195658] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.195704] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:173:plane 1B] because [FB:639] is removed

<7> [131.195727] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.195929] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.196093] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.196267] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.196454] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.196609] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.196782] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.196946] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.204210] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: staged scaling request for 20x20->1920x1080 scaler_users = 0x100

<7> [131.204449] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.204699] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.204932] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.205159] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0

<7> [131.205413] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0

<7> [131.205669] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 2284000 num active planes 1

<7> [131.205909] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 2284

<7> [131.206142] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.206452] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 17844 kHz -> 35688 kHz

<7> [131.206693] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:173

<7> [131.212341] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.212388] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:173:plane 1B] because [FB:639] is removed

<7> [131.212411] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.212615] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.212780] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.212937] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.213092] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.213274] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.213538] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.213778] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.221058] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: staged scaling request for 20x20->1920x1080 scaler_users = 0x100

<7> [131.221276] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.221445] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.221603] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.221760] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [131.221915] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [131.222089] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 571000 num active planes 1

<7> [131.222271] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [131.222480] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.222673] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:173

<7> [131.228970] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.229014] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:173:plane 1B] because [FB:639] is removed

<7> [131.229036] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.229257] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.229430] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.229588] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.229746] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.229901] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.230075] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.230268] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.237769] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: staged scaling request for 20x20->1920x1080 scaler_users = 0x100

<7> [131.237966] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:173:plane 1B] using Y plane [PLANE:283:plane 6B]

<7> [131.238160] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677

<7> [131.238347] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316

<7> [131.238590] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.238830] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.239070] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [131.239335] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [131.239573] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.239807] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.240044] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0

<7> [131.240279] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0

<7> [131.240536] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 856500 num active planes 2

<7> [131.240778] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 857

<7> [131.241021] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.241332] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:173

<7> [131.245609] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.245654] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:173:plane 1B] because [FB:639] is removed

<7> [131.245682] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.245878] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 677) -> ( 0 - 0), size 677 -> 0

<7> [131.246041] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 677 - 1993) -> ( 0 - 0), size 1316 -> 0

<7> [131.246200] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.246389] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.246559] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.246712] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.246868] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.247022] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.247180] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.247366] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.247554] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.247719] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.254406] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: staged scaling request for 20x20->1920x1080 scaler_users = 0x100

<7> [131.254596] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:173:plane 1B] using Y plane [PLANE:283:plane 6B]

<7> [131.254783] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677

<7> [131.254947] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316

<7> [131.255105] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.255280] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.255437] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.255589] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.255744] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.255898] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.256082] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [131.256260] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [131.256445] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1713000 num active planes 2

<7> [131.256610] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1713

<7> [131.256770] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.256960] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:173

<7> [131.262432] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.262476] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:173:plane 1B] because [FB:639] is removed

<7> [131.262502] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.262700] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 677) -> ( 0 - 0), size 677 -> 0

<7> [131.262866] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 677 - 1993) -> ( 0 - 0), size 1316 -> 0

<7> [131.263023] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.263180] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.263356] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.263512] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.263666] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.263819] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.263971] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.264124] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.264325] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.264493] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.271021] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: staged scaling request for 20x20->1920x1080 scaler_users = 0x100

<7> [131.271258] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.271432] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.271588] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.271744] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.271898] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.272072] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1

<7> [131.272252] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [131.272425] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.272615] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:173

<7> [131.278926] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.278966] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:173:plane 1B] because [FB:639] is removed

<7> [131.278987] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.279164] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.279352] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.279521] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.279678] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.279831] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.280042] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.280207] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.287711] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: staged scaling request for 20x20->1920x1080 scaler_users = 0x100

<7> [131.287918] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.288085] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.288264] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.288438] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.288593] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.288813] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: staged scaling request for 20x20->1920x1080 scaler_users = 0x100

<7> [131.288991] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.289157] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.289329] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.289483] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.289639] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.289804] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1

<7> [131.289968] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [131.290128] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.290356] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:173

<7> [131.295674] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.295719] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:173:plane 1B] because [FB:639] is removed

<7> [131.295741] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.295940] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.296105] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.296284] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.296443] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.296598] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.296771] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.296943] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.304423] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: staged scaling request for 20x20->1920x1080 scaler_users = 0x100

<7> [131.304624] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.304792] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.304952] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.305109] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.305291] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.305542] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: staged scaling request for 20x20->1920x1080 scaler_users = 0x100

<7> [131.305707] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.305859] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.306025] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.306193] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.306402] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.306642] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: staged scaling request for 20x20->1920x1080 scaler_users = 0x100

<7> [131.306827] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.306999] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.307168] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.307364] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.307549] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.307728] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1

<7> [131.307911] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [131.308090] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.308338] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:173

<7> [131.312309] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.312353] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:173:plane 1B] because [FB:639] is removed

<7> [131.312373] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.312566] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.312730] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.312888] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.313045] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.313200] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.313411] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.313584] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.321088] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: staged scaling request for 20x20->1920x1080 scaler_users = 0x100

<7> [131.321305] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.321474] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.321633] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.321788] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0

<7> [131.321943] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0

<7> [131.322145] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 2284000 num active planes 1

<7> [131.322326] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 2284

<7> [131.322489] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.322682] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:173

<7> [131.328985] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.329025] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:173:plane 1B] because [FB:639] is removed

<7> [131.329046] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.329241] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:173:plane 1B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.329421] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.329578] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] lines 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.329736] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] blocks 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.329890] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:173:plane 1B] min_ddb 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.330063] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.330236] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.337620] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: staged scaling request for 20x20->1920x1080 scaler_users = 0x200

<7> [131.337824] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.337992] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.338152] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.338329] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [131.338501] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [131.338675] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 571000 num active planes 1

<7> [131.338840] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [131.339056] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.339346] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:203

<7> [131.345620] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.345665] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:203:plane 2B] because [FB:639] is removed

<7> [131.345686] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.345882] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.346048] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.346208] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.346393] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.346552] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.346729] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.346897] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.354201] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: staged scaling request for 20x20->1920x1080 scaler_users = 0x200

<7> [131.354478] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.354699] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.354886] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.355072] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.355285] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.355532] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1

<7> [131.355728] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [131.355921] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.356146] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:203

<7> [131.362307] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.362350] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:203:plane 2B] because [FB:639] is removed

<7> [131.362371] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.362563] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.362725] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.362901] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.363106] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.363355] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.363606] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.363820] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.370919] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: staged scaling request for 20x20->1920x1080 scaler_users = 0x200

<7> [131.371137] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.371336] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.371504] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.371670] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.371835] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.372096] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1

<7> [131.372365] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [131.372609] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.372876] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:203

<7> [131.378953] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.378999] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:203:plane 2B] because [FB:639] is removed

<7> [131.379022] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.379246] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.379424] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.379593] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.379762] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.379968] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.380159] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.380356] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.387605] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: staged scaling request for 20x20->1920x1080 scaler_users = 0x200

<7> [131.387852] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.388061] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.388282] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.388488] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0

<7> [131.388686] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0

<7> [131.388901] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 2284000 num active planes 1

<7> [131.389111] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 2284

<7> [131.389362] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.389608] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:203

<7> [131.395646] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.395699] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:203:plane 2B] because [FB:639] is removed

<7> [131.395724] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.395955] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.396153] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.396375] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.396568] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.396758] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.396967] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.397172] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.404418] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: staged scaling request for 20x20->1920x1080 scaler_users = 0x200

<7> [131.404632] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.404830] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.405055] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.405299] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [131.405526] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [131.405768] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 571000 num active planes 1

<7> [131.405999] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [131.406273] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.406583] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:203

<7> [131.412298] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.412343] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:203:plane 2B] because [FB:639] is removed

<7> [131.412364] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.412560] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.412724] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.412884] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.413043] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.413201] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.413401] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.413565] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.421142] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: staged scaling request for 20x20->1920x1080 scaler_users = 0x200

<7> [131.421376] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:203:plane 2B] using Y plane [PLANE:283:plane 6B]

<7> [131.421587] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677

<7> [131.421771] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316

<7> [131.421944] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.422118] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.422311] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [131.422489] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [131.422660] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.422829] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.423008] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0

<7> [131.423194] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0

<7> [131.423541] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: staged scaling request for 20x20->1920x1080 scaler_users = 0x200

<7> [131.423740] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:203:plane 2B] using Y plane [PLANE:283:plane 6B]

<7> [131.423950] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677

<7> [131.424138] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316

<7> [131.424350] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.424539] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.424729] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [131.424915] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [131.425100] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.425299] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.425489] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0

<7> [131.425675] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0

<7> [131.425833] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 856500 num active planes 2

<7> [131.425996] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 857

<7> [131.426156] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.426363] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:203

<7> [131.428972] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.429014] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:203:plane 2B] because [FB:639] is removed

<7> [131.429039] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.429265] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 677) -> ( 0 - 0), size 677 -> 0

<7> [131.429434] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 677 - 1993) -> ( 0 - 0), size 1316 -> 0

<7> [131.429590] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.429745] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.429921] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.430077] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.430244] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.430396] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.430549] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.430702] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.430880] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.431043] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.437672] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: staged scaling request for 20x20->1920x1080 scaler_users = 0x200

<7> [131.437864] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:203:plane 2B] using Y plane [PLANE:283:plane 6B]

<7> [131.438052] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677

<7> [131.438215] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316

<7> [131.438393] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.438563] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.438719] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.438874] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.439028] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.439205] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.439404] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [131.439572] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [131.439814] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: staged scaling request for 20x20->1920x1080 scaler_users = 0x200

<7> [131.439979] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:203:plane 2B] using Y plane [PLANE:283:plane 6B]

<7> [131.440152] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677

<7> [131.440322] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316

<7> [131.440497] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.440661] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.440823] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.440975] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.441135] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.441305] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.441457] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [131.441609] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [131.441858] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: staged scaling request for 20x20->1920x1080 scaler_users = 0x200

<7> [131.442022] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:203:plane 2B] using Y plane [PLANE:283:plane 6B]

<7> [131.442205] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677

<7> [131.442387] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316

<7> [131.442542] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.442695] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.442852] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.443033] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.443190] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.443380] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.443541] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [131.443692] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [131.443850] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1713000 num active planes 2

<7> [131.444036] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1713

<7> [131.444204] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.444427] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:203

<7> [131.445646] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.445689] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:203:plane 2B] because [FB:639] is removed

<7> [131.445714] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.445918] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 677) -> ( 0 - 0), size 677 -> 0

<7> [131.446078] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 677 - 1993) -> ( 0 - 0), size 1316 -> 0

<7> [131.446251] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.446440] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.446597] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.446758] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.446918] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.447071] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.447234] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.447388] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.447595] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.447762] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.454366] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: staged scaling request for 20x20->1920x1080 scaler_users = 0x200

<7> [131.454569] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.454739] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.454898] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.455057] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.455215] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.455438] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1

<7> [131.455631] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [131.455792] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.455998] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:203

<7> [131.462351] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.462397] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:203:plane 2B] because [FB:639] is removed

<7> [131.462418] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.462614] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.462779] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.462938] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.463096] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.463274] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.463494] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.463657] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.471059] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: staged scaling request for 20x20->1920x1080 scaler_users = 0x200

<7> [131.471284] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.471455] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.471611] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.471768] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.471966] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.472140] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1

<7> [131.472329] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [131.472499] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.472693] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:203

<7> [131.478955] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.478995] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:203:plane 2B] because [FB:639] is removed

<7> [131.479015] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.479194] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.479382] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.479538] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.479694] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.479850] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.480059] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.480236] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.487723] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: staged scaling request for 20x20->1920x1080 scaler_users = 0x200

<7> [131.487927] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.488094] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.488285] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.488489] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.488644] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.488820] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1

<7> [131.488984] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [131.489144] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.489379] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:203

<7> [131.495703] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.495747] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:203:plane 2B] because [FB:639] is removed

<7> [131.495770] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.495966] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.496132] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.496338] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.496545] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.496700] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.496872] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.497039] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.504514] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: staged scaling request for 20x20->1920x1080 scaler_users = 0x200

<7> [131.504747] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.504937] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.505120] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.505319] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0

<7> [131.505505] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0

<7> [131.505705] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 2284000 num active planes 1

<7> [131.505895] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 2284

<7> [131.506118] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.506370] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:203

<7> [131.512319] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.512362] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:203:plane 2B] because [FB:639] is removed

<7> [131.512384] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.512573] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:203:plane 2B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.512734] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.512900] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] lines 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.513091] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] blocks 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.513341] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:203:plane 2B] min_ddb 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.513552] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.513752] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.520939] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: staged scaling request for 20x20->1920x1080 scaler_users = 0x400

<7> [131.521153] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.521359] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.521549] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.521714] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [131.521906] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [131.522146] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 571000 num active planes 1

<7> [131.522407] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [131.522658] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.522918] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:233

<7> [131.529006] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.529055] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:233:plane 3B] because [FB:639] is removed

<7> [131.529079] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.529335] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.529546] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.529722] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.529896] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.530071] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.530283] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.530495] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.537553] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: staged scaling request for 20x20->1920x1080 scaler_users = 0x400

<7> [131.537792] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.537990] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.538186] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.538409] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.538601] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.538812] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1

<7> [131.539013] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [131.539261] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.539508] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:233

<7> [131.545624] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.545668] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:233:plane 3B] because [FB:639] is removed

<7> [131.545689] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.545910] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.546108] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.546327] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.546518] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.546706] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.546914] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.547114] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.554182] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: staged scaling request for 20x20->1920x1080 scaler_users = 0x400

<7> [131.554417] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.554614] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.554778] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.554983] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.555186] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.555532] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: staged scaling request for 20x20->1920x1080 scaler_users = 0x400

<7> [131.555756] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.555958] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.556159] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.556384] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.556625] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.556834] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1

<7> [131.557049] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [131.557272] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.557560] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:233

<7> [131.562322] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.562365] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:233:plane 3B] because [FB:639] is removed

<7> [131.562385] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.562577] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.562738] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.562893] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.563049] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.563202] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.563399] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.563590] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.570871] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: staged scaling request for 20x20->1920x1080 scaler_users = 0x400

<7> [131.571076] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.571261] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.571422] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.571580] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0

<7> [131.571734] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0

<7> [131.571949] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: staged scaling request for 20x20->1920x1080 scaler_users = 0x400

<7> [131.572169] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.572346] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.572510] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.572674] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0

<7> [131.572826] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0

<7> [131.573026] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: staged scaling request for 20x20->1920x1080 scaler_users = 0x400

<7> [131.573193] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.573403] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.573559] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.573723] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0

<7> [131.573884] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0

<7> [131.574047] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 2284000 num active planes 1

<7> [131.574209] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 2284

<7> [131.574395] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.574619] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:233

<7> [131.578977] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.579019] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:233:plane 3B] because [FB:639] is removed

<7> [131.579038] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.579237] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.579398] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.579554] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.579710] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.579898] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.580079] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.580260] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.587748] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: staged scaling request for 20x20->1920x1080 scaler_users = 0x400

<7> [131.587955] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.588124] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.588304] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.588503] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [131.588659] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [131.588835] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 571000 num active planes 1

<7> [131.588998] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [131.589158] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.589381] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:233

<7> [131.595666] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.595712] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:233:plane 3B] because [FB:639] is removed

<7> [131.595735] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.595936] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.596097] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.596272] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.596464] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.596620] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.596793] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.596957] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.604358] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: staged scaling request for 20x20->1920x1080 scaler_users = 0x400

<7> [131.604542] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:233:plane 3B] using Y plane [PLANE:283:plane 6B]

<7> [131.604719] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677

<7> [131.604873] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316

<7> [131.605026] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.605176] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.605357] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [131.605533] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [131.605688] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.605849] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.606036] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0

<7> [131.606256] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0

<7> [131.606513] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 856500 num active planes 2

<7> [131.606727] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 857

<7> [131.606939] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.607174] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:233

<7> [131.612342] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.612386] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:233:plane 3B] because [FB:639] is removed

<7> [131.612411] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.612605] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 677) -> ( 0 - 0), size 677 -> 0

<7> [131.612767] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 677 - 1993) -> ( 0 - 0), size 1316 -> 0

<7> [131.612924] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.613080] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.613246] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.613402] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.613555] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.613708] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.613861] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.614014] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.614243] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.614407] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.621025] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: staged scaling request for 20x20->1920x1080 scaler_users = 0x400

<7> [131.621217] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:233:plane 3B] using Y plane [PLANE:283:plane 6B]

<7> [131.621434] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677

<7> [131.621616] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316

<7> [131.621775] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.621929] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.622085] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.622250] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.622426] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.622579] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.622731] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [131.622884] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [131.623059] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1713000 num active planes 2

<7> [131.623233] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1713

<7> [131.623427] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.623621] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:233

<7> [131.629001] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.629045] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:233:plane 3B] because [FB:639] is removed

<7> [131.629071] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.629297] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 677) -> ( 0 - 0), size 677 -> 0

<7> [131.629471] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 677 - 1993) -> ( 0 - 0), size 1316 -> 0

<7> [131.629628] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.629781] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.629938] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.630091] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.630254] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.630435] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.630592] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.630747] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.630918] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.631082] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.637699] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: staged scaling request for 20x20->1920x1080 scaler_users = 0x400

<7> [131.637904] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.638069] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.638246] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.638409] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.638563] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.638736] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1

<7> [131.638924] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [131.639105] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.639339] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:233

<7> [131.645649] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.645693] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:233:plane 3B] because [FB:639] is removed

<7> [131.645713] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.645907] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.646069] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.646236] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.646393] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.646548] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.646721] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.646882] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.654410] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: staged scaling request for 20x20->1920x1080 scaler_users = 0x400

<7> [131.654616] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.654782] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.654943] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.655100] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.655276] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.655490] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1

<7> [131.655656] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [131.655818] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.656011] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:233

<7> [131.662380] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.662422] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:233:plane 3B] because [FB:639] is removed

<7> [131.662442] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.662623] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.662785] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.662950] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.663114] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.663310] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.663493] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.663667] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.671160] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: staged scaling request for 20x20->1920x1080 scaler_users = 0x400

<7> [131.671413] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.671581] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.671739] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.671926] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.672176] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.672436] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1

<7> [131.672654] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [131.672858] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.673100] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:233

<7> [131.678997] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.679043] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:233:plane 3B] because [FB:639] is removed

<7> [131.679064] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.679294] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.679471] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.679641] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.679810] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.680020] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.680217] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.680422] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.687919] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: staged scaling request for 20x20->1920x1080 scaler_users = 0x400

<7> [131.688169] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.688407] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.688610] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.688807] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0

<7> [131.689006] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0

<7> [131.689326] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: staged scaling request for 20x20->1920x1080 scaler_users = 0x400

<7> [131.689551] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.689748] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.689946] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.690152] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0

<7> [131.690385] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0

<7> [131.690604] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 2284000 num active planes 1

<7> [131.690825] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 2284

<7> [131.691044] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.691315] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:233

<7> [131.695742] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.695796] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:233:plane 3B] because [FB:639] is removed

<7> [131.695817] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.696014] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:233:plane 3B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.696177] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.696359] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] lines 8, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.696517] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] blocks 16, 17, 17, 17, 17, 23, 33, 33, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.696672] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:233:plane 3B] min_ddb 19, 20, 20, 20, 20, 27, 38, 38, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.696843] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.697007] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.704302] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: staged scaling request for 20x20->1920x1080 scaler_users = 0x800

<7> [131.704509] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.704675] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.704835] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.705039] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [131.705214] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [131.705513] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: staged scaling request for 20x20->1920x1080 scaler_users = 0x800

<7> [131.705702] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.705874] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.706044] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.706213] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [131.706456] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [131.706704] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: staged scaling request for 20x20->1920x1080 scaler_users = 0x800

<7> [131.706884] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.707063] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.707236] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.707405] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [131.707570] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [131.707784] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 571000 num active planes 1

<7> [131.707961] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [131.708121] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.708336] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:263

<7> [131.712353] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.712395] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:263:plane 4B] because [FB:639] is removed

<7> [131.712416] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.712606] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.712765] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.712921] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.713074] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.713240] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.713414] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.713577] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.720878] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: staged scaling request for 20x20->1920x1080 scaler_users = 0x800

<7> [131.721067] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.721220] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.721415] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.721574] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.721727] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.721901] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1

<7> [131.722065] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [131.722235] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.722449] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:263

<7> [131.729079] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.729124] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:263:plane 4B] because [FB:639] is removed

<7> [131.729145] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.729378] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.729541] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.729699] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.729855] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.730010] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.730181] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.730371] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.737626] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: staged scaling request for 20x20->1920x1080 scaler_users = 0x800

<7> [131.737819] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.738012] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.738197] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.738427] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.738610] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.738812] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1

<7> [131.739000] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [131.739238] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.739475] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:263

<7> [131.745667] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.745709] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:263:plane 4B] because [FB:639] is removed

<7> [131.745730] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.745926] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.746088] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.746273] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.746429] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.746585] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.746755] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.746981] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.754526] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: staged scaling request for 20x20->1920x1080 scaler_users = 0x800

<7> [131.754749] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.754935] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.755117] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.755317] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [131.755492] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [131.755683] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 571000 num active planes 1

<7> [131.755867] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [131.756090] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.756444] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:263

<7> [131.762422] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.762471] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:263:plane 4B] because [FB:639] is removed

<7> [131.762496] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.762715] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.762899] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.763076] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.763264] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.763447] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.763639] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.763822] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.771115] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: staged scaling request for 20x20->1920x1080 scaler_users = 0x800

<7> [131.771398] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:263:plane 4B] using Y plane [PLANE:283:plane 6B]

<7> [131.771632] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677

<7> [131.771834] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316

<7> [131.772032] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.772296] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.772508] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [131.772713] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [131.772914] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.773114] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.773336] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0

<7> [131.773536] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0

<7> [131.773806] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 856500 num active planes 2

<7> [131.774026] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 857

<7> [131.774219] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.774476] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:263

<7> [131.779005] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.779048] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:263:plane 4B] because [FB:639] is removed

<7> [131.779074] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.779282] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 677) -> ( 0 - 0), size 677 -> 0

<7> [131.779445] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 677 - 1993) -> ( 0 - 0), size 1316 -> 0

<7> [131.779604] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.779759] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.779949] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.780102] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.780277] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.780437] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.780589] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.780740] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.780911] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.781087] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.787767] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: staged scaling request for 20x20->1920x1080 scaler_users = 0x800

<7> [131.787957] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:263:plane 4B] using Y plane [PLANE:283:plane 6B]

<7> [131.788142] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677

<7> [131.788358] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316

<7> [131.788517] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.788672] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.788827] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.788992] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.789173] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.789348] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.789508] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [131.789676] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [131.789852] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1713000 num active planes 2

<7> [131.790017] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1713

<7> [131.790177] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.790436] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:263

<7> [131.795688] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.795732] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:263:plane 4B] because [FB:639] is removed

<7> [131.795758] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.795950] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 677) -> ( 0 - 0), size 677 -> 0

<7> [131.796106] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 677 - 1993) -> ( 0 - 0), size 1316 -> 0

<7> [131.796310] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.796465] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.796620] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.796773] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.796938] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.797125] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.797304] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.797460] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.797644] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.797807] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.804444] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: staged scaling request for 20x20->1920x1080 scaler_users = 0x800

<7> [131.804647] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.804815] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.804977] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.805135] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.805315] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.805506] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1

<7> [131.805671] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [131.805830] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.806021] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:263

<7> [131.812379] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.812424] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:263:plane 4B] because [FB:639] is removed

<7> [131.812446] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.812647] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.812813] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.812971] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.813126] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.813312] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.813502] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.813666] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.821194] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: staged scaling request for 20x20->1920x1080 scaler_users = 0x800

<7> [131.821441] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.821613] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.821772] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.821930] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.822147] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.822443] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: staged scaling request for 20x20->1920x1080 scaler_users = 0x800

<7> [131.822642] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.822829] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.823005] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.823180] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.823400] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.823607] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1

<7> [131.823806] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [131.824003] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.824222] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:263

<7> [131.829017] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.829059] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:263:plane 4B] because [FB:639] is removed

<7> [131.829080] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.829326] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.829490] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.829647] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.829810] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.829994] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.830176] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.830355] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.837761] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: staged scaling request for 20x20->1920x1080 scaler_users = 0x800

<7> [131.837955] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.838112] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.838295] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.838453] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.838607] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.838820] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: staged scaling request for 20x20->1920x1080 scaler_users = 0x800

<7> [131.839027] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.839181] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.839359] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.839521] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.839673] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.839884] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: staged scaling request for 20x20->1920x1080 scaler_users = 0x800

<7> [131.840057] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.840222] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.840443] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.840610] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.840781] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.840964] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1

<7> [131.841135] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [131.841354] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.841584] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:263

<7> [131.845687] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.845729] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:263:plane 4B] because [FB:639] is removed

<7> [131.845748] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.11: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.845938] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:plane 4B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.846097] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.846275] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.846433] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.846588] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:263:plane 4B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.846761] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.846941] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.854304] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: staged scaling request for 20x20->1920x1080 scaler_users = 0x1000

<7> [131.854510] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.854674] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.854831] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.854987] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [131.855141] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [131.855385] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: staged scaling request for 20x20->1920x1080 scaler_users = 0x1000

<7> [131.855557] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.855715] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.855871] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.856026] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [131.856178] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [131.856425] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: staged scaling request for 20x20->1920x1080 scaler_users = 0x1000

<7> [131.856591] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.856744] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.856893] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.857050] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [131.857219] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [131.857398] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 571000 num active planes 1

<7> [131.857560] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [131.857719] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.857915] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:273

<7> [131.862390] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.862435] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:273:plane 5B] because [FB:639] is removed

<7> [131.862456] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.862648] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.862811] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.862966] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.863122] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.863304] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.863475] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.863639] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.870932] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: staged scaling request for 20x20->1920x1080 scaler_users = 0x1000

<7> [131.871122] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.871313] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.871473] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.871631] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.871786] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.872000] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1

<7> [131.872168] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [131.872355] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.872559] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:273

<7> [131.879028] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.879069] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:273:plane 5B] because [FB:639] is removed

<7> [131.879091] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.879349] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.879514] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.879668] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.879824] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.880013] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.880188] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.880378] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.887676] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: staged scaling request for 20x20->1920x1080 scaler_users = 0x1000

<7> [131.887882] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.888061] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.888245] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.888424] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.888591] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.888777] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1

<7> [131.888954] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [131.889128] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.889375] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:273

<7> [131.895749] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.895792] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:273:plane 5B] because [FB:639] is removed

<7> [131.895814] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.896010] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.896170] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.896350] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.896508] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.896662] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.896833] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.897007] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.904523] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: staged scaling request for 20x20->1920x1080 scaler_users = 0x1000

<7> [131.904750] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.904937] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.905112] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.905311] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [131.905497] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [131.905691] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 571000 num active planes 1

<7> [131.905875] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [131.906104] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.906440] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:273

<7> [131.912384] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.912433] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:273:plane 5B] because [FB:639] is removed

<7> [131.912456] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.912671] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.912850] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.913024] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.913197] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.913398] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.913590] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.913771] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.921276] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: staged scaling request for 20x20->1920x1080 scaler_users = 0x1000

<7> [131.921516] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:273:plane 5B] using Y plane [PLANE:283:plane 6B]

<7> [131.921749] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677

<7> [131.921952] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316

<7> [131.922151] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.922370] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.922569] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [131.922763] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [131.922960] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.923154] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.923391] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0

<7> [131.923590] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0

<7> [131.923816] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 856500 num active planes 2

<7> [131.924040] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 857

<7> [131.924272] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.924534] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:273

<7> [131.929066] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.929111] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:273:plane 5B] because [FB:639] is removed

<7> [131.929141] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.929366] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 677) -> ( 0 - 0), size 677 -> 0

<7> [131.929528] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 677 - 1993) -> ( 0 - 0), size 1316 -> 0

<7> [131.929686] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.929840] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.929994] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.930147] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.930315] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.930468] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 2, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.930619] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 4, 17, 17, 17, 17, 23, 33, 33, 18, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.930771] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 6, 20, 20, 20, 20, 27, 38, 38, 19, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.930940] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.931102] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.937832] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: staged scaling request for 20x20->1920x1080 scaler_users = 0x1000

<7> [131.938025] i915 0000:00:02.0: [drm:intel_plane_atomic_check [i915]] UV plane [PLANE:273:plane 5B] using Y plane [PLANE:283:plane 6B]

<7> [131.938216] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 0) -> ( 0 - 677), size 0 -> 677

<7> [131.938398] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 677 - 1993), size 0 -> 1316

<7> [131.938574] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.938731] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.938887] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.939057] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.939260] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.939428] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.939586] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [131.939748] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [131.939922] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1713000 num active planes 2

<7> [131.940085] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1713

<7> [131.940287] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.940486] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:273

<7> [131.945710] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.945754] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:273:plane 5B] because [FB:639] is removed

<7> [131.945781] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.945980] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 677) -> ( 0 - 0), size 677 -> 0

<7> [131.946143] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 677 - 1993) -> ( 0 - 0), size 1316 -> 0

<7> [131.946320] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.946476] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.946632] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.946787] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.946966] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.947127] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.947302] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.947455] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.947634] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.947797] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.954482] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: staged scaling request for 20x20->1920x1080 scaler_users = 0x1000

<7> [131.954685] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.954853] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.955010] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.955166] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.955347] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.955572] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: staged scaling request for 20x20->1920x1080 scaler_users = 0x1000

<7> [131.955740] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.955894] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.956047] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.956225] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.956413] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.956579] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1

<7> [131.956743] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [131.956905] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.957098] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:273

<7> [131.962403] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.962443] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:273:plane 5B] because [FB:639] is removed

<7> [131.962463] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.962641] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.962788] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.962930] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.963070] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.963210] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.963412] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.963576] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.971246] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: staged scaling request for 20x20->1920x1080 scaler_users = 0x1000

<7> [131.971454] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.971618] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.971774] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.971971] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.972126] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.972390] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: staged scaling request for 20x20->1920x1080 scaler_users = 0x1000

<7> [131.972563] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.972717] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.972869] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.973038] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.973209] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.973438] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: staged scaling request for 20x20->1920x1080 scaler_users = 0x1000

<7> [131.973609] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.973764] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.973920] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.974076] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.974244] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.974452] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1

<7> [131.974616] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [131.974784] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.974986] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:273

<7> [131.979030] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.979073] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:273:plane 5B] because [FB:639] is removed

<7> [131.979093] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.979307] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.979470] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.979629] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.979786] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.979976] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.980156] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.980342] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [131.987826] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: staged scaling request for 20x20->1920x1080 scaler_users = 0x1000

<7> [131.988031] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [131.988197] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [131.988381] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [131.988561] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [131.988717] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [131.988891] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1

<7> [131.989055] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [131.989217] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [131.989461] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:273

<7> [131.995729] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [131.995773] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:273:plane 5B] because [FB:639] is removed

<7> [131.995795] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.12: Staged freeing scaler id 0 scaler_users = 0x0

<7> [131.995986] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:273:plane 5B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [131.996151] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [131.996329] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.996501] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.996657] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:273:plane 5B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [131.996827] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [131.996991] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [132.004327] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.13: staged scaling request for 20x20->1920x1080 scaler_users = 0x2000

<7> [132.004531] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.004697] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.004864] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.005071] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [132.005276] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [132.005480] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 571000 num active planes 1

<7> [132.005665] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [132.005844] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [132.006058] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:283

<7> [132.012401] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [132.012443] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:283:plane 6B] because [FB:639] is removed

<7> [132.012465] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.13: Staged freeing scaler id 0 scaler_users = 0x0

<7> [132.012660] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [132.012821] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [132.012979] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.013137] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.013318] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.013508] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [132.013671] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [132.020983] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.13: staged scaling request for 20x20->1920x1080 scaler_users = 0x2000

<7> [132.021204] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.021418] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.021599] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.021776] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [132.021950] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [132.022144] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1

<7> [132.022367] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [132.022552] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [132.022775] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:283

<7> [132.029118] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [132.029171] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:283:plane 6B] because [FB:639] is removed

<7> [132.029196] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.13: Staged freeing scaler id 0 scaler_users = 0x0

<7> [132.029464] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [132.029666] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [132.029858] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.030049] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.030249] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.030488] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [132.030691] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [132.037660] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.13: staged scaling request for 20x20->1920x1080 scaler_users = 0x2000

<7> [132.037875] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.038098] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.038343] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.038556] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [132.038765] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [132.038999] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1

<7> [132.039274] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [132.039508] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [132.039789] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:283

<7> [132.045707] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [132.045752] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:283:plane 6B] because [FB:639] is removed

<7> [132.045772] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.13: Staged freeing scaler id 0 scaler_users = 0x0

<7> [132.045967] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [132.046133] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [132.046313] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.046477] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.046638] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.046822] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [132.047003] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [132.054500] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.13: staged scaling request for 20x20->1920x1080 scaler_users = 0x2000

<7> [132.054711] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.054884] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.055047] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.055209] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [132.055390] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [132.055568] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 571000 num active planes 1

<7> [132.055735] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [132.055941] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [132.056204] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:283

<7> [132.062433] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [132.062481] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:283:plane 6B] because [FB:639] is removed

<7> [132.062505] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.13: Staged freeing scaler id 0 scaler_users = 0x0

<7> [132.062720] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [132.062905] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [132.063076] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.063269] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.063444] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.063629] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [132.063809] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [132.071185] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.13: staged scaling request for 20x20->1920x1080 scaler_users = 0x2000

<7> [132.071485] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.071698] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.071897] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.072096] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [132.072370] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [132.072606] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1

<7> [132.072830] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [132.073036] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [132.073293] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:283

<7> [132.079051] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [132.079095] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:283:plane 6B] because [FB:639] is removed

<7> [132.079117] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.13: Staged freeing scaler id 0 scaler_users = 0x0

<7> [132.079350] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [132.079513] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [132.079678] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.079881] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.080101] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.080397] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [132.080627] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [132.087908] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.13: staged scaling request for 20x20->1920x1080 scaler_users = 0x2000

<7> [132.088135] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.088350] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.088530] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.088705] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [132.088903] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [132.089217] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.13: staged scaling request for 20x20->1920x1080 scaler_users = 0x2000

<7> [132.089515] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.089744] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.089968] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.090193] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [132.090442] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [132.090710] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1

<7> [132.090948] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [132.091186] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [132.091492] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:283

<7> [132.095784] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [132.095828] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:283:plane 6B] because [FB:639] is removed

<7> [132.095850] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.13: Staged freeing scaler id 0 scaler_users = 0x0

<7> [132.096044] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [132.096207] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [132.096391] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.096548] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.096704] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.096874] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [132.097038] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [132.104514] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.13: staged scaling request for 20x20->1920x1080 scaler_users = 0x2000

<7> [132.104717] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.104884] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.105043] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.105199] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [132.105383] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [132.105604] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.13: staged scaling request for 20x20->1920x1080 scaler_users = 0x2000

<7> [132.105773] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.105930] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.106083] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.106303] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [132.106463] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [132.106675] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.13: staged scaling request for 20x20->1920x1080 scaler_users = 0x2000

<7> [132.106859] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.107025] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.107194] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.107388] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [132.107573] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [132.107774] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1

<7> [132.107963] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [132.108142] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [132.108374] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:283

<7> [132.112435] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [132.112477] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:283:plane 6B] because [FB:639] is removed

<7> [132.112498] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.13: Staged freeing scaler id 0 scaler_users = 0x0

<7> [132.112685] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:283:plane 6B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [132.112848] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [132.113006] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.113162] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.113337] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:283:plane 6B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.113511] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [132.113677] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [132.121021] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.14: staged scaling request for 20x20->1920x1080 scaler_users = 0x4000

<7> [132.121222] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:293:plane 7B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.121416] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.121586] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.121743] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [132.121898] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [132.122124] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.14: staged scaling request for 20x20->1920x1080 scaler_users = 0x4000

<7> [132.122320] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:293:plane 7B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.122474] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.122625] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.122777] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [132.122929] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [132.123140] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.14: staged scaling request for 20x20->1920x1080 scaler_users = 0x4000

<7> [132.123329] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:293:plane 7B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.123488] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.123639] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.123791] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [132.123949] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [132.124113] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 571000 num active planes 1

<7> [132.124294] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [132.124454] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [132.124646] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:293

<7> [132.129136] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [132.129180] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:293:plane 7B] because [FB:639] is removed

<7> [132.129201] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.14: Staged freeing scaler id 0 scaler_users = 0x0

<7> [132.129415] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:293:plane 7B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [132.129581] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [132.129736] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.129892] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.130069] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.130251] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [132.130414] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [132.137658] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.14: staged scaling request for 20x20->1920x1080 scaler_users = 0x4000

<7> [132.137862] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:293:plane 7B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.138029] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.138188] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.138367] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [132.138542] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [132.138716] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1

<7> [132.138879] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [132.139048] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [132.139292] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:293

<7> [132.145735] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [132.145780] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:293:plane 7B] because [FB:639] is removed

<7> [132.145802] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.14: Staged freeing scaler id 0 scaler_users = 0x0

<7> [132.146000] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:293:plane 7B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [132.146165] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [132.146345] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.146519] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.146673] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.146845] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [132.147011] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [132.154312] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.14: staged scaling request for 20x20->1920x1080 scaler_users = 0x4000

<7> [132.154517] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:293:plane 7B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.154681] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.154838] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.155007] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [132.155184] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [132.155411] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1

<7> [132.155601] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [132.155786] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [132.156010] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:293

<7> [132.162513] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [132.162559] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:293:plane 7B] because [FB:639] is removed

<7> [132.162581] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.14: Staged freeing scaler id 0 scaler_users = 0x0

<7> [132.162785] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:293:plane 7B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [132.162948] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [132.163105] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.163281] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.163439] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.163613] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [132.163777] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [132.171216] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.14: staged scaling request for 20x20->1920x1080 scaler_users = 0x4000

<7> [132.171488] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:293:plane 7B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.171678] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.171854] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.172033] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [132.172261] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [132.172468] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 571000 num active planes 1

<7> [132.172661] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [132.172853] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [132.173093] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:293

<7> [132.179087] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [132.179137] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:293:plane 7B] because [FB:639] is removed

<7> [132.179161] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.14: Staged freeing scaler id 0 scaler_users = 0x0

<7> [132.179493] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:293:plane 7B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [132.179692] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [132.179885] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.180085] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.180327] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.180551] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [132.180760] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [132.187962] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.14: staged scaling request for 20x20->1920x1080 scaler_users = 0x4000

<7> [132.188226] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:293:plane 7B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.188485] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.188701] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.188911] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [132.189120] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [132.189399] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1

<7> [132.189621] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [132.189837] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [132.190093] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:293

<7> [132.195765] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [132.195811] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:293:plane 7B] because [FB:639] is removed

<7> [132.195832] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.14: Staged freeing scaler id 0 scaler_users = 0x0

<7> [132.196032] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:293:plane 7B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [132.196203] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [132.196406] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.196570] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.196731] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.196909] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [132.197125] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [132.204565] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.14: staged scaling request for 20x20->1920x1080 scaler_users = 0x4000

<7> [132.204797] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:293:plane 7B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.204988] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.205172] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.205384] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [132.205567] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [132.205767] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1

<7> [132.205959] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [132.206204] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [132.206618] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:293

<7> [132.212459] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [132.212506] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:293:plane 7B] because [FB:639] is removed

<7> [132.212530] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.14: Staged freeing scaler id 0 scaler_users = 0x0

<7> [132.212746] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:293:plane 7B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [132.212927] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [132.213104] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.213296] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.213471] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.213661] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [132.213844] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [132.221284] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.14: staged scaling request for 20x20->1920x1080 scaler_users = 0x4000

<7> [132.221567] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:293:plane 7B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.221772] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.221971] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.222172] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [132.222393] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [132.222712] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.14: staged scaling request for 20x20->1920x1080 scaler_users = 0x4000

<7> [132.222929] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:293:plane 7B] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.223125] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.223366] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.223582] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [132.223781] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [132.223997] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 1142000 num active planes 1

<7> [132.224218] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [132.224470] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [132.224733] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:309:pipe B] attached scaler id 1.0 to PLANE:293

<7> [132.229125] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [132.229168] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:293:plane 7B] because [FB:639] is removed

<7> [132.229189] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:309:pipe B] scaler_user index 1.14: Staged freeing scaler id 0 scaler_users = 0x0

<7> [132.229430] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:293:plane 7B] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [132.229594] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [132.229753] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.229909] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.230064] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:293:plane 7B] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.230246] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:309:pipe B] data rate 0 num active planes 0

<7> [132.230414] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<6> [132.237855] [IGT] kms_plane_scaling: finished subtest pipe-B, SUCCESS

<6> [132.238427] [IGT] kms_plane_scaling: starting dynamic subtest pipe-C

<7> [132.240275] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [132.240472] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [132.241097] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [132.241300] i915 0000:00:02.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6)

<7> [132.241940] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [132.242139] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [132.242809] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [132.243632] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [132.243827] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [132.244495] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [132.244700] i915 0000:00:02.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6)

<7> [132.245441] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [132.245619] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [132.246263] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [132.247044] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [132.247281] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [132.247940] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [132.248156] i915 0000:00:02.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6)

<7> [132.248812] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [132.248988] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [132.249610] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [132.252554] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:588:HDMI-A-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [132.252750] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24)

<7> [132.252915] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:447:pipe C] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [132.253080] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:587:DDI B/PHY B] [CRTC:447:pipe C]

<7> [132.253247] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.enable (expected yes, found no)

<7> [132.253412] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.active (expected yes, found no)

<7> [132.253572] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in cpu_transcoder (expected 1, found -1)

<7> [132.253730] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in lane_count (expected 4, found 0)

<7> [132.253926] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000)

<7> [132.254084] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [132.254264] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)

<7> [132.254429] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2080, found 0)

<7> [132.254586] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)

<7> [132.254743] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2080, found 0)

<7> [132.254901] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 1968, found 0)

<7> [132.255090] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2000, found 0)

<7> [132.255255] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)

<7> [132.255420] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)

<7> [132.255585] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1083, found 0)

<7> [132.255742] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1088, found 0)

<7> [132.255897] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1144, found 0)

<7> [132.256052] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1144, found 0)

<7> [132.256237] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)

<7> [132.256423] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2080, found 0)

<7> [132.256591] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)

<7> [132.256749] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2080, found 0)

<7> [132.256916] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 1968, found 0)

<7> [132.257073] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2000, found 0)

<7> [132.257252] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)

<7> [132.257411] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)

<7> [132.257566] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1083, found 0)

<7> [132.257734] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1088, found 0)

<7> [132.257910] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1144, found 0)

<7> [132.258075] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1144, found 0)

<7> [132.258240] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [132.258406] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)

<7> [132.258560] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0)

<7> [132.258714] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in has_hdmi_sink (expected yes, found no)

<7> [132.258867] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in has_infoframe (expected yes, found no)

<7> [132.259044] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [132.259222] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 285500, found 0)

<7> [132.259411] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 285500, found 0)

<7> [132.259566] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in port_clock (expected 285500, found 0)

<7> [132.259730] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in infoframes.enable (expected 0x00000071, found 0x00000000)

<7> [132.259885] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in avi infoframe

<7> [132.260038] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [132.260208] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [132.260238] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling

<7> [132.260252] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0

<7> [132.260255] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [132.260418] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in spd infoframe

<7> [132.260581] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [132.260734] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [132.260739] i915 0000:00:02.0: source device information: PC General (0x9)

<7> [132.260740] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [132.260901] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:309:pipe B] fastset requirement not met in hdmi infoframe

<7> [132.261055] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [132.261208] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4

<7> [132.261212] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [132.261388] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:309:pipe B] fastset requirement not met, forcing full modeset

<7> [132.261543] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.enable (expected no, found yes)

<7> [132.261731] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.active (expected no, found yes)

<7> [132.261891] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in cpu_transcoder (expected -1, found 2)

<7> [132.262052] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in lane_count (expected 0, found 4)

<7> [132.262207] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040)

<7> [132.262390] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [132.262544] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)

<7> [132.262699] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2080)

<7> [132.262855] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)

<7> [132.263037] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2080)

<7> [132.263194] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 1968)

<7> [132.263369] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2000)

<7> [132.263531] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)

<7> [132.263685] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)

<7> [132.263839] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1083)

<7> [132.263992] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1088)

<7> [132.264180] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1144)

<7> [132.264365] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1144)

<7> [132.264532] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)

<7> [132.264698] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2080)

<7> [132.264857] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)

<7> [132.265013] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2080)

<7> [132.265169] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1968)

<7> [132.265431] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2000)

<7> [132.265593] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)

<7> [132.265748] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)

<7> [132.265909] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1083)

<7> [132.266063] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1088)

<7> [132.266216] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1144)

<7> [132.266400] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1144)

<7> [132.266588] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [132.266743] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)

<7> [132.266905] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4)

<7> [132.267067] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in has_hdmi_sink (expected no, found yes)

<7> [132.267222] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in has_infoframe (expected no, found yes)

<7> [132.267395] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [132.267549] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 285500)

<7> [132.267712] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 285500)

<7> [132.267894] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in port_clock (expected 0, found 285500)

<7> [132.268050] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in infoframes.enable (expected 0x00000000, found 0x00000071)

<7> [132.268210] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in avi infoframe

<7> [132.268389] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [132.268543] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [132.268695] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [132.268710] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling

<7> [132.268718] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0

<7> [132.268720] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in spd infoframe

<7> [132.268874] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [132.269026] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [132.269202] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [132.269210] i915 0000:00:02.0: source device information: PC General (0x9)

<7> [132.269213] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hdmi infoframe

<7> [132.269409] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [132.269571] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [132.269723] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4

<7> [132.269728] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:447:pipe C] fastset requirement not met, forcing full modeset

<7> [132.269893] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:309:pipe B] releasing DPLL 0

<7> [132.270075] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:447:pipe C] scaler_user index 2.16: staged scaling request for 20x20->1920x1080 scaler_users = 0x10000

<7> [132.270275] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:309:pipe B] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x2 -> 0x4

<7> [132.270431] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:447:pipe C] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x2 -> 0x4

<7> [132.270622] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:303:cursor B] ddb (1993 - 2048) -> ( 0 - 0), size 55 -> 0

<7> [132.270778] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:311:plane 1C] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.270943] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:441:cursor C] ddb ( 0 - 0) -> (1993 - 2048), size 0 -> 55

<7> [132.271105] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:311:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.271270] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:311:plane 1C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.271426] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:311:plane 1C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [132.271578] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:311:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [132.271789] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:447:pipe C] data rate 571000 num active planes 1

<7> [132.271952] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [132.272120] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [132.272321] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:309:pipe B] min cdclk: 192000 kHz -> 0 kHz

<7> [132.272481] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:447:pipe C] min cdclk: 0 kHz -> 192000 kHz

<7> [132.272661] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 35688 kHz -> 8922 kHz

<7> [132.272825] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:447:pipe C] allocated DPLL 0

<7> [132.273029] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:447:pipe C] reserving DPLL 0

<7> [132.273192] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:447:pipe C] attached scaler id 2.0 to PLANE:311

<7> [132.273381] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:309:pipe B] enable: no [modeset]

<7> [132.273556] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:173:plane 1B] fb: [NOFB], visible: no

<7> [132.273717] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:203:plane 2B] fb: [NOFB], visible: no

<7> [132.273876] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:233:plane 3B] fb: [NOFB], visible: no

<7> [132.274039] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:263:plane 4B] fb: [NOFB], visible: no

<7> [132.274226] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:273:plane 5B] fb: [NOFB], visible: no

<7> [132.274423] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:283:plane 6B] fb: [NOFB], visible: no

<7> [132.274580] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:293:plane 7B] fb: [NOFB], visible: no

<7> [132.274743] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:303:cursor B] fb: [NOFB], visible: no

<7> [132.274899] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:447:pipe C] enable: yes [modeset]

<7> [132.275054] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [132.275248] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: C, pipe bpp: 24, dithering: 0

<7> [132.275403] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [132.275565] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [132.275727] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [132.275882] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [132.276036] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 1, infoframes: 1, infoframes enabled: 0x71

<7> [132.276190] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] GCP: 0x0

<7> [132.276391] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [132.276406] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling

<7> [132.276414] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0

<7> [132.276415] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [132.276420] i915 0000:00:02.0: source device information: PC General (0x9)

<7> [132.276422] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4

<7> [132.276425] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00

<7> [132.276586] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47

<7> [132.276741] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff

<7> [132.276902] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03 00

<7> [132.277057] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2

<7> [132.277210] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [132.277384] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1144, vmax: 1144, flipline: 1144, pipeline full: 61, guardband: 63 vsync start: 0, vsync end: 0

<7> [132.277559] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1144, vmax vtotal: 1144

<7> [132.277738] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [132.277899] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5

<7> [132.278055] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5

<7> [132.278219] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5

<7> [132.278403] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x40 0x5

<7> [132.278558] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5

<7> [132.278713] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 285500, pipe src: 1920x1080+0+0, pixel rate 285500, min cdclk 192000

<7> [132.278907] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 59, ips linetime: 0

<7> [132.279070] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x10000, scaler_id: -1, scaling_filter: 0

<7> [132.279242] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [132.279407] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [132.279566] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1801be, cfgcr1: 0x488, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [132.279723] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [132.279878] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [132.280064] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [132.280217] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [132.280395] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [132.280556] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [132.280710] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [132.280863] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [132.281019] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [132.281200] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [132.281376] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [132.281529] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [132.281690] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [132.281843] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:311:plane 1C] fb: [FB:639] 20x20 format = RG16 little-endian (0x36314752) modifier = 0x0, visible: yes

<7> [132.281999] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: 0, scaling_filter: 0

<7> [132.282153] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 20.000000x20.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [132.282355] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:341:plane 2C] fb: [NOFB], visible: no

<7> [132.282510] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:371:plane 3C] fb: [NOFB], visible: no

<7> [132.282670] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:401:plane 4C] fb: [NOFB], visible: no

<7> [132.282823] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:411:plane 5C] fb: [NOFB], visible: no

<7> [132.282984] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:421:plane 6C] fb: [NOFB], visible: no

<7> [132.283136] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:431:plane 7C] fb: [NOFB], visible: no

<7> [132.283305] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:441:cursor C] fb: [NOFB], visible: no

<7> [132.283740] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4

<7> [132.283953] i915 0000:00:02.0: [drm:intel_audio_codec_disable [i915]] [CONNECTOR:588:HDMI-A-1][ENCODER:587:DDI B/PHY B] Disable audio codec on [CRTC:309:pipe B]

<7> [132.295601] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [132.298251] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:588:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10

<7> [132.298867] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [132.299024] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [132.299573] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [132.299754] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:588:HDMI-A-1] Failed to read TMDS config: -6

<7> [132.299770] i915 0000:00:02.0: [drm:intel_ddi_disable [i915]] [CONNECTOR:588:HDMI-A-1] Failed to reset sink scrambling/TMDS bit clock ratio

<7> [132.299950] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe B

<7> [132.304326] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [132.304567] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x2, on? 1) for [CRTC:309:pipe B]

<7> [132.304758] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [132.304934] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:587:DDI B/PHY B]

<7> [132.305096] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:597:DDI TC1/PHY TC1]

<7> [132.305272] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:599:DP-MST A]

<7> [132.305458] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:600:DP-MST B]

<7> [132.305616] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:601:DP-MST C]

<7> [132.305773] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:602:DP-MST D]

<7> [132.305930] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:607:DDI TC2/PHY TC2]

<7> [132.306086] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:609:DP-MST A]

<7> [132.306252] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:610:DP-MST B]

<7> [132.306441] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:611:DP-MST C]

<7> [132.306597] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:612:DP-MST D]

<7> [132.306753] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:616:DDI TC3/PHY TC3]

<7> [132.306911] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:618:DP-MST A]

<7> [132.307066] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:619:DP-MST B]

<7> [132.307221] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:620:DP-MST C]

<7> [132.307411] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:621:DP-MST D]

<7> [132.307599] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:625:DDI TC4/PHY TC4]

<7> [132.307758] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:627:DP-MST A]

<7> [132.307916] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:628:DP-MST B]

<7> [132.308074] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:629:DP-MST C]

<7> [132.308229] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:630:DP-MST D]

<7> [132.308430] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:598:DP-1]

<7> [132.308644] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:608:DP-2]

<7> [132.308828] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:617:DP-3]

<7> [132.309010] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:626:DP-4]

<7> [132.309375] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x4, on? 0) for [CRTC:447:pipe C]

<7> [132.309540] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [132.310037] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [132.310311] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe C

<7> [132.311024] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:588:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10

<7> [132.311590] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [132.311748] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [132.312272] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [132.312444] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:588:HDMI-A-1] Failed to read TMDS config: -6

<7> [132.312460] i915 0000:00:02.0: [drm:intel_ddi_enable [i915]] [CONNECTOR:588:HDMI-A-1] Failed to configure sink scrambling/TMDS bit clock ratio

<7> [132.321171] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:309:pipe B]

<7> [132.321563] i915 0000:00:02.0: [drm:intel_audio_codec_enable [i915]] [CONNECTOR:588:HDMI-A-1][ENCODER:587:DDI B/PHY B] Enable audio codec on [CRTC:447:pipe C], 64 bytes ELD

<7> [132.329438] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] HDMI audio pixel clock setting for 285500 not found, falling back to defaults

<7> [132.329625] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] Configuring HDMI audio for pixel clock 25200 (0x00010000)

<7> [132.329787] i915 0000:00:02.0: [drm:hsw_audio_config_update [i915]] using automatic N

<6> [132.329953] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 5 not expected

<6> [132.329956] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 0 not expected

<6> [132.329957] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 10 not expected

<6> [132.329959] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 6 not expected

<7> [132.330097] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:588:HDMI-A-1]

<7> [132.330433] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:447:pipe C]

<7> [132.331695] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe C

<7> [132.332107] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:639] from all active usage due to RMFB ioctl

<7> [132.332148] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:311:plane 1C] because [FB:639] is removed

<7> [132.332171] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:447:pipe C] scaler_user index 2.16: Staged freeing scaler id 0 scaler_users = 0x0

<7> [132.332377] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:311:plane 1C] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [132.332551] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:311:plane 1C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [132.332707] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:311:plane 1C] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.332863] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:311:plane 1C] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.333017] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:311:plane 1C] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.333195] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:447:pipe C] data rate 0 num active planes 0

<7> [132.333378] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [132.338229] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:447:pipe C] scaler_user index 2.17: staged scaling request for 20x20->1920x1080 scaler_users = 0x20000

<7> [132.338469] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:341:plane 2C] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.338639] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:341:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.338796] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:341:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.338953] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:341:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [132.339109] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:341:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [132.339361] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:447:pipe C] scaler_user index 2.17: staged scaling request for 20x20->1920x1080 scaler_users = 0x20000

<7> [132.339578] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:341:plane 2C] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.339735] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:341:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.339898] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:341:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.340061] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:341:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [132.340215] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:341:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [132.340453] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:447:pipe C] scaler_user index 2.17: staged scaling request for 20x20->1920x1080 scaler_users = 0x20000

<7> [132.340619] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:341:plane 2C] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.340773] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:341:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.340924] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:341:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.341075] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:341:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [132.341227] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:341:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [132.341444] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:447:pipe C] data rate 571000 num active planes 1

<7> [132.341611] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [132.341778] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [132.341986] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:447:pipe C] attached scaler id 2.0 to PLANE:341

<7> [132.346255] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:640] from all active usage due to RMFB ioctl

<7> [132.346301] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:341:plane 2C] because [FB:640] is removed

<7> [132.346323] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:447:pipe C] scaler_user index 2.17: Staged freeing scaler id 0 scaler_users = 0x0

<7> [132.346520] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:341:plane 2C] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [132.346685] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:341:plane 2C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [132.346843] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:341:plane 2C] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.346999] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:341:plane 2C] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.347154] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:341:plane 2C] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.347359] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:447:pipe C] data rate 0 num active planes 0

<7> [132.347524] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [132.352513] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x810

<7> [132.354864] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:447:pipe C] scaler_user index 2.18: staged scaling request for 20x20->1920x1080 scaler_users = 0x40000

<7> [132.355077] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:371:plane 3C] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.355263] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 3C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.355443] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 3C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.355601] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 3C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [132.355758] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 3C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [132.355935] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:447:pipe C] data rate 571000 num active planes 1

<7> [132.356100] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [132.356281] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [132.356519] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:447:pipe C] attached scaler id 2.0 to PLANE:371

<7> [132.356814] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL

<7> [132.356847] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled

<7> [132.362919] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:640] from all active usage due to RMFB ioctl

<7> [132.362965] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:371:plane 3C] because [FB:640] is removed

<7> [132.362987] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:447:pipe C] scaler_user index 2.18: Staged freeing scaler id 0 scaler_users = 0x0

<7> [132.363187] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:371:plane 3C] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [132.363406] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 3C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [132.363585] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 3C] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.363743] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 3C] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.363898] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 3C] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.364072] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:447:pipe C] data rate 0 num active planes 0

<7> [132.364247] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [132.371477] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:447:pipe C] scaler_user index 2.19: staged scaling request for 20x20->1920x1080 scaler_users = 0x80000

<7> [132.371681] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:401:plane 4C] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.371845] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:401:plane 4C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.372004] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:401:plane 4C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.372161] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:401:plane 4C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [132.372339] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:401:plane 4C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [132.372555] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:447:pipe C] data rate 571000 num active planes 1

<7> [132.372723] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [132.372883] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [132.373080] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:447:pipe C] attached scaler id 2.0 to PLANE:401

<7> [132.379615] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:640] from all active usage due to RMFB ioctl

<7> [132.379660] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:401:plane 4C] because [FB:640] is removed

<7> [132.379684] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:447:pipe C] scaler_user index 2.19: Staged freeing scaler id 0 scaler_users = 0x0

<7> [132.379887] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:401:plane 4C] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [132.380051] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:401:plane 4C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [132.380209] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:401:plane 4C] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.380389] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:401:plane 4C] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.380573] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:401:plane 4C] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.380749] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:447:pipe C] data rate 0 num active planes 0

<7> [132.380913] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [132.388137] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:447:pipe C] scaler_user index 2.20: staged scaling request for 20x20->1920x1080 scaler_users = 0x100000

<7> [132.388363] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:411:plane 5C] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.388529] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:411:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.388686] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:411:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.388843] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:411:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [132.388998] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:411:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [132.389171] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:447:pipe C] data rate 571000 num active planes 1

<7> [132.389362] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [132.389525] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [132.389720] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:447:pipe C] attached scaler id 2.0 to PLANE:411

<7> [132.396315] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:640] from all active usage due to RMFB ioctl

<7> [132.396361] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:411:plane 5C] because [FB:640] is removed

<7> [132.396383] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:447:pipe C] scaler_user index 2.20: Staged freeing scaler id 0 scaler_users = 0x0

<7> [132.396580] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:411:plane 5C] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [132.396743] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:411:plane 5C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [132.396900] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:411:plane 5C] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.397056] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:411:plane 5C] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.397212] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:411:plane 5C] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.397508] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:447:pipe C] data rate 0 num active planes 0

<7> [132.397747] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [132.404797] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:447:pipe C] scaler_user index 2.21: staged scaling request for 20x20->1920x1080 scaler_users = 0x200000

<7> [132.405006] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:421:plane 6C] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.405172] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:421:plane 6C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.405355] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:421:plane 6C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.405515] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:421:plane 6C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [132.405672] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:421:plane 6C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [132.405847] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:447:pipe C] data rate 571000 num active planes 1

<7> [132.406032] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [132.406213] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [132.406442] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:447:pipe C] attached scaler id 2.0 to PLANE:421

<7> [132.412912] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:640] from all active usage due to RMFB ioctl

<7> [132.412956] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:421:plane 6C] because [FB:640] is removed

<7> [132.412979] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:447:pipe C] scaler_user index 2.21: Staged freeing scaler id 0 scaler_users = 0x0

<7> [132.413176] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:421:plane 6C] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [132.413368] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:421:plane 6C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [132.413527] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:421:plane 6C] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.413683] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:421:plane 6C] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.413840] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:421:plane 6C] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.414012] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:447:pipe C] data rate 0 num active planes 0

<7> [132.414199] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [132.421511] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:447:pipe C] scaler_user index 2.22: staged scaling request for 20x20->1920x1080 scaler_users = 0x400000

<7> [132.421717] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:431:plane 7C] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.421897] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:431:plane 7C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.422089] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:431:plane 7C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.422308] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:431:plane 7C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [132.422530] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:431:plane 7C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [132.422733] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:447:pipe C] data rate 571000 num active planes 1

<7> [132.422930] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [132.423121] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [132.423387] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:447:pipe C] attached scaler id 2.0 to PLANE:431

<7> [132.429605] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:640] from all active usage due to RMFB ioctl

<7> [132.429651] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:431:plane 7C] because [FB:640] is removed

<7> [132.429673] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:447:pipe C] scaler_user index 2.22: Staged freeing scaler id 0 scaler_users = 0x0

<7> [132.429870] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:431:plane 7C] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [132.430035] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:431:plane 7C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [132.430196] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:431:plane 7C] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.430392] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:431:plane 7C] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.430580] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:431:plane 7C] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.430753] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:447:pipe C] data rate 0 num active planes 0

<7> [132.430934] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<6> [132.438396] [IGT] kms_plane_scaling: finished subtest pipe-C, SUCCESS

<6> [132.438990] [IGT] kms_plane_scaling: starting dynamic subtest pipe-D

<7> [132.441012] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [132.441257] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [132.441926] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [132.442137] i915 0000:00:02.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6)

<7> [132.442822] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [132.443059] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [132.443787] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [132.444677] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [132.444927] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [132.445629] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [132.445847] i915 0000:00:02.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6)

<7> [132.446530] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [132.446724] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [132.447397] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [132.448188] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [132.448402] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [132.449114] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [132.449316] i915 0000:00:02.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6)

<7> [132.449973] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [132.450144] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [132.450775] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [132.453806] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:588:HDMI-A-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [132.454003] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24)

<7> [132.454170] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:585:pipe D] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [132.454399] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:587:DDI B/PHY B] [CRTC:585:pipe D]

<7> [132.454556] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.enable (expected yes, found no)

<7> [132.454719] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.active (expected yes, found no)

<7> [132.454887] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in cpu_transcoder (expected 2, found -1)

<7> [132.455083] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in lane_count (expected 4, found 0)

<7> [132.455262] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000)

<7> [132.455423] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [132.455592] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)

<7> [132.455749] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2080, found 0)

<7> [132.455906] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)

<7> [132.456080] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2080, found 0)

<7> [132.456263] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 1968, found 0)

<7> [132.456427] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2000, found 0)

<7> [132.456582] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)

<7> [132.456745] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)

<7> [132.456899] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1083, found 0)

<7> [132.457054] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1088, found 0)

<7> [132.457208] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1144, found 0)

<7> [132.457437] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1144, found 0)

<7> [132.457592] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)

<7> [132.457757] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2080, found 0)

<7> [132.457922] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)

<7> [132.458076] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2080, found 0)

<7> [132.458230] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 1968, found 0)

<7> [132.458403] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2000, found 0)

<7> [132.458590] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)

<7> [132.458744] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)

<7> [132.458906] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1083, found 0)

<7> [132.459068] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1088, found 0)

<7> [132.459224] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1144, found 0)

<7> [132.459396] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1144, found 0)

<7> [132.459551] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [132.459713] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)

<7> [132.459900] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0)

<7> [132.460055] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in has_hdmi_sink (expected yes, found no)

<7> [132.460217] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in has_infoframe (expected yes, found no)

<7> [132.460399] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [132.460554] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 285500, found 0)

<7> [132.460709] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 285500, found 0)

<7> [132.460865] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in port_clock (expected 285500, found 0)

<7> [132.461055] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in infoframes.enable (expected 0x00000071, found 0x00000000)

<7> [132.461210] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in avi infoframe

<7> [132.461454] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [132.461615] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [132.461631] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling

<7> [132.461639] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0

<7> [132.461641] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [132.461795] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in spd infoframe

<7> [132.461948] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [132.462102] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [132.462107] i915 0000:00:02.0: source device information: PC General (0x9)

<7> [132.462108] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [132.462293] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:447:pipe C] fastset requirement not met in hdmi infoframe

<7> [132.462482] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [132.462636] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4

<7> [132.462640] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [132.462804] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:447:pipe C] fastset requirement not met, forcing full modeset

<7> [132.462970] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.enable (expected no, found yes)

<7> [132.463126] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.active (expected no, found yes)

<7> [132.463294] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in cpu_transcoder (expected -1, found 3)

<7> [132.463451] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in lane_count (expected 0, found 4)

<7> [132.463634] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040)

<7> [132.463794] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [132.463955] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)

<7> [132.464109] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2080)

<7> [132.464280] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)

<7> [132.464443] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2080)

<7> [132.464604] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 1968)

<7> [132.464763] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2000)

<7> [132.464965] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)

<7> [132.465122] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)

<7> [132.465302] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1083)

<7> [132.465468] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1088)

<7> [132.465622] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1144)

<7> [132.465777] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1144)

<7> [132.465931] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)

<7> [132.466117] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2080)

<7> [132.466299] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)

<7> [132.466454] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2080)

<7> [132.466615] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1968)

<7> [132.466770] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2000)

<7> [132.466924] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)

<7> [132.467096] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)

<7> [132.467278] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1083)

<7> [132.467441] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1088)

<7> [132.467595] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1144)

<7> [132.467759] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1144)

<7> [132.467913] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [132.468068] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)

<7> [132.468221] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4)

<7> [132.468438] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in has_hdmi_sink (expected no, found yes)

<7> [132.468594] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in has_infoframe (expected no, found yes)

<7> [132.468756] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [132.468921] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 285500)

<7> [132.469077] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 285500)

<7> [132.469231] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in port_clock (expected 0, found 285500)

<7> [132.469409] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in infoframes.enable (expected 0x00000000, found 0x00000071)

<7> [132.469596] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in avi infoframe

<7> [132.469753] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [132.469914] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [132.470075] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [132.470091] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling

<7> [132.470099] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0

<7> [132.470101] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in spd infoframe

<7> [132.470276] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [132.470437] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [132.470595] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [132.470600] i915 0000:00:02.0: source device information: PC General (0x9)

<7> [132.470602] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hdmi infoframe

<7> [132.470759] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [132.470959] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [132.471114] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4

<7> [132.471118] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:585:pipe D] fastset requirement not met, forcing full modeset

<7> [132.471301] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:447:pipe C] releasing DPLL 0

<7> [132.471496] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:585:pipe D] scaler_user index 3.24: staged scaling request for 20x20->1920x1080 scaler_users = 0x1000000

<7> [132.471684] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:447:pipe C] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x4 -> 0x8

<7> [132.471841] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:585:pipe D] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x4 -> 0x8

<7> [132.472012] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:441:cursor C] ddb (1993 - 2048) -> ( 0 - 0), size 55 -> 0

<7> [132.472193] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:449:plane 1D] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.472370] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:579:cursor D] ddb ( 0 - 0) -> (1993 - 2048), size 0 -> 55

<7> [132.472526] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 1D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.472689] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 1D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.472845] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 1D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [132.473000] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 1D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [132.473177] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:585:pipe D] data rate 571000 num active planes 1

<7> [132.473399] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [132.473559] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [132.473749] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:447:pipe C] min cdclk: 192000 kHz -> 0 kHz

<7> [132.473919] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:585:pipe D] min cdclk: 0 kHz -> 192000 kHz

<7> [132.474101] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:585:pipe D] allocated DPLL 0

<7> [132.474281] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:585:pipe D] reserving DPLL 0

<7> [132.474447] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:585:pipe D] attached scaler id 3.0 to PLANE:449

<7> [132.474636] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:447:pipe C] enable: no [modeset]

<7> [132.474802] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:311:plane 1C] fb: [NOFB], visible: no

<7> [132.474965] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:341:plane 2C] fb: [NOFB], visible: no

<7> [132.475131] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:371:plane 3C] fb: [NOFB], visible: no

<7> [132.475303] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:401:plane 4C] fb: [NOFB], visible: no

<7> [132.475461] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:411:plane 5C] fb: [NOFB], visible: no

<7> [132.475628] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:421:plane 6C] fb: [NOFB], visible: no

<7> [132.475808] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:431:plane 7C] fb: [NOFB], visible: no

<7> [132.475971] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:441:cursor C] fb: [NOFB], visible: no

<7> [132.476128] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:585:pipe D] enable: yes [modeset]

<7> [132.476308] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [132.476466] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: D, pipe bpp: 24, dithering: 0

<7> [132.476622] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [132.476778] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [132.476966] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [132.477131] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [132.477307] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 1, infoframes: 1, infoframes enabled: 0x71

<7> [132.477465] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] GCP: 0x0

<7> [132.477628] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [132.477643] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling

<7> [132.477651] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0

<7> [132.477653] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [132.477658] i915 0000:00:02.0: source device information: PC General (0x9)

<7> [132.477660] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4

<7> [132.477664] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00

<7> [132.477818] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47

<7> [132.477974] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff

<7> [132.478128] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03 00

<7> [132.478335] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2

<7> [132.478498] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [132.478663] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1144, vmax: 1144, flipline: 1144, pipeline full: 61, guardband: 63 vsync start: 0, vsync end: 0

<7> [132.478825] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1144, vmax vtotal: 1144

<7> [132.478985] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [132.479141] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5

<7> [132.479309] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5

<7> [132.479465] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5

<7> [132.479658] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x40 0x5

<7> [132.479815] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5

<7> [132.479976] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 285500, pipe src: 1920x1080+0+0, pixel rate 285500, min cdclk 192000

<7> [132.480137] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 59, ips linetime: 0

<7> [132.480316] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x1000000, scaler_id: -1, scaling_filter: 0

<7> [132.480474] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [132.480632] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [132.480820] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1801be, cfgcr1: 0x488, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [132.480979] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [132.481141] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [132.481320] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [132.481475] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [132.481630] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [132.481784] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [132.481936] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [132.482132] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [132.482311] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [132.482472] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [132.482635] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [132.482789] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [132.482942] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [132.483096] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:449:plane 1D] fb: [FB:640] 20x20 format = RG16 little-endian (0x36314752) modifier = 0x0, visible: yes

<7> [132.483296] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: 0, scaling_filter: 0

<7> [132.483452] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 20.000000x20.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [132.483612] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:479:plane 2D] fb: [NOFB], visible: no

<7> [132.483773] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:509:plane 3D] fb: [NOFB], visible: no

<7> [132.483925] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:539:plane 4D] fb: [NOFB], visible: no

<7> [132.484077] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:549:plane 5D] fb: [NOFB], visible: no

<7> [132.484245] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:559:plane 6D] fb: [NOFB], visible: no

<7> [132.484422] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:569:plane 7D] fb: [NOFB], visible: no

<7> [132.484582] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:579:cursor D] fb: [NOFB], visible: no

<7> [132.484980] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_5

<7> [132.485184] i915 0000:00:02.0: [drm:intel_audio_codec_disable [i915]] [CONNECTOR:588:HDMI-A-1][ENCODER:587:DDI B/PHY B] Disable audio codec on [CRTC:447:pipe C]

<7> [132.496130] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [132.498263] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:588:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10

<7> [132.498899] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [132.499049] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [132.499651] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [132.499823] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:588:HDMI-A-1] Failed to read TMDS config: -6

<7> [132.499839] i915 0000:00:02.0: [drm:intel_ddi_disable [i915]] [CONNECTOR:588:HDMI-A-1] Failed to reset sink scrambling/TMDS bit clock ratio

<7> [132.500026] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe C

<7> [132.505264] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [132.505460] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x4, on? 1) for [CRTC:447:pipe C]

<7> [132.505649] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [132.505823] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:587:DDI B/PHY B]

<7> [132.505986] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:597:DDI TC1/PHY TC1]

<7> [132.506144] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:599:DP-MST A]

<7> [132.506330] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:600:DP-MST B]

<7> [132.506519] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:601:DP-MST C]

<7> [132.506678] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:602:DP-MST D]

<7> [132.506837] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:607:DDI TC2/PHY TC2]

<7> [132.506994] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:609:DP-MST A]

<7> [132.507150] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:610:DP-MST B]

<7> [132.507325] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:611:DP-MST C]

<7> [132.507501] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:612:DP-MST D]

<7> [132.507655] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:616:DDI TC3/PHY TC3]

<7> [132.507810] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:618:DP-MST A]

<7> [132.507963] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:619:DP-MST B]

<7> [132.508117] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:620:DP-MST C]

<7> [132.508282] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:621:DP-MST D]

<7> [132.508458] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:625:DDI TC4/PHY TC4]

<7> [132.508613] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:627:DP-MST A]

<7> [132.508768] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:628:DP-MST B]

<7> [132.508922] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:629:DP-MST C]

<7> [132.509079] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:630:DP-MST D]

<7> [132.509248] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:598:DP-1]

<7> [132.509461] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:608:DP-2]

<7> [132.509648] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:617:DP-3]

<7> [132.509833] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:626:DP-4]

<7> [132.510159] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x8, on? 0) for [CRTC:585:pipe D]

<7> [132.510374] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [132.510612] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [132.510862] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe D

<7> [132.511604] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:588:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10

<7> [132.512257] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [132.512405] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [132.513015] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [132.513190] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:588:HDMI-A-1] Failed to read TMDS config: -6

<7> [132.513205] i915 0000:00:02.0: [drm:intel_ddi_enable [i915]] [CONNECTOR:588:HDMI-A-1] Failed to configure sink scrambling/TMDS bit clock ratio

<7> [132.521915] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:447:pipe C]

<7> [132.522351] i915 0000:00:02.0: [drm:intel_audio_codec_enable [i915]] [CONNECTOR:588:HDMI-A-1][ENCODER:587:DDI B/PHY B] Enable audio codec on [CRTC:585:pipe D], 64 bytes ELD

<7> [132.530206] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] HDMI audio pixel clock setting for 285500 not found, falling back to defaults

<7> [132.530405] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] Configuring HDMI audio for pixel clock 25200 (0x00010000)

<7> [132.530567] i915 0000:00:02.0: [drm:hsw_audio_config_update [i915]] using automatic N

<6> [132.530733] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 5 not expected

<6> [132.530736] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 0 not expected

<6> [132.530737] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 10 not expected

<6> [132.530739] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 6 not expected

<7> [132.530877] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:588:HDMI-A-1]

<7> [132.531137] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:585:pipe D]

<7> [132.532431] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe D

<7> [132.532853] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:640] from all active usage due to RMFB ioctl

<7> [132.532897] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:449:plane 1D] because [FB:640] is removed

<7> [132.532922] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:585:pipe D] scaler_user index 3.24: Staged freeing scaler id 0 scaler_users = 0x0

<7> [132.533107] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:449:plane 1D] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [132.533318] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 1D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [132.533478] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 1D] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.533633] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 1D] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.533786] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 1D] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.533959] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:585:pipe D] data rate 0 num active planes 0

<7> [132.534120] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [132.538932] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:585:pipe D] scaler_user index 3.25: staged scaling request for 20x20->1920x1080 scaler_users = 0x2000000

<7> [132.539155] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:479:plane 2D] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.539343] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 2D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.539579] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 2D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.539810] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 2D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [132.540041] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 2D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [132.540401] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:585:pipe D] scaler_user index 3.25: staged scaling request for 20x20->1920x1080 scaler_users = 0x2000000

<7> [132.540647] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:479:plane 2D] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.540870] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 2D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.541094] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 2D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.541334] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 2D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [132.541561] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 2D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [132.541802] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:585:pipe D] data rate 571000 num active planes 1

<7> [132.542040] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [132.542311] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [132.542601] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:585:pipe D] attached scaler id 3.0 to PLANE:479

<7> [132.542668] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x810

<7> [132.547007] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:641] from all active usage due to RMFB ioctl

<7> [132.547051] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:479:plane 2D] because [FB:641] is removed

<7> [132.547073] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:585:pipe D] scaler_user index 3.25: Staged freeing scaler id 0 scaler_users = 0x0

<7> [132.547279] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL

<7> [132.547306] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled

<7> [132.547361] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:479:plane 2D] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [132.547602] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 2D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [132.547832] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 2D] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.548064] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 2D] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.548303] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 2D] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.548556] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:585:pipe D] data rate 0 num active planes 0

<7> [132.548794] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [132.555658] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:585:pipe D] scaler_user index 3.26: staged scaling request for 20x20->1920x1080 scaler_users = 0x4000000

<7> [132.555875] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:509:plane 3D] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.556039] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:509:plane 3D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.556282] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:509:plane 3D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.556487] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:509:plane 3D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [132.556646] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:509:plane 3D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [132.556883] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:585:pipe D] scaler_user index 3.26: staged scaling request for 20x20->1920x1080 scaler_users = 0x4000000

<7> [132.557067] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:509:plane 3D] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.557242] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:509:plane 3D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.557403] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:509:plane 3D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.557559] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:509:plane 3D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [132.557721] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:509:plane 3D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [132.557987] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:585:pipe D] scaler_user index 3.26: staged scaling request for 20x20->1920x1080 scaler_users = 0x4000000

<7> [132.558172] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:509:plane 3D] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.558386] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:509:plane 3D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.558554] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:509:plane 3D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.558722] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:509:plane 3D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [132.558891] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:509:plane 3D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [132.559066] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:585:pipe D] data rate 571000 num active planes 1

<7> [132.559252] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [132.559415] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [132.559635] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:585:pipe D] attached scaler id 3.0 to PLANE:509

<7> [132.563693] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:641] from all active usage due to RMFB ioctl

<7> [132.563737] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:509:plane 3D] because [FB:641] is removed

<7> [132.563759] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:585:pipe D] scaler_user index 3.26: Staged freeing scaler id 0 scaler_users = 0x0

<7> [132.563954] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:509:plane 3D] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [132.564115] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:509:plane 3D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [132.564289] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:509:plane 3D] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.564445] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:509:plane 3D] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.564601] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:509:plane 3D] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.564768] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:585:pipe D] data rate 0 num active planes 0

<7> [132.564968] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [132.572346] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:585:pipe D] scaler_user index 3.27: staged scaling request for 20x20->1920x1080 scaler_users = 0x8000000

<7> [132.572594] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:539:plane 4D] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.572758] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:539:plane 4D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.572915] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:539:plane 4D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.573071] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:539:plane 4D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [132.573224] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:539:plane 4D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [132.573530] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:585:pipe D] scaler_user index 3.27: staged scaling request for 20x20->1920x1080 scaler_users = 0x8000000

<7> [132.573792] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:539:plane 4D] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.574018] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:539:plane 4D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.574254] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:539:plane 4D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.574485] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:539:plane 4D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [132.574717] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:539:plane 4D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [132.575052] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:585:pipe D] scaler_user index 3.27: staged scaling request for 20x20->1920x1080 scaler_users = 0x8000000

<7> [132.575314] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:539:plane 4D] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.575545] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:539:plane 4D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.575772] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:539:plane 4D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.576003] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:539:plane 4D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [132.576227] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:539:plane 4D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [132.576487] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:585:pipe D] data rate 571000 num active planes 1

<7> [132.576729] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [132.576963] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [132.577265] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:585:pipe D] attached scaler id 3.0 to PLANE:539

<7> [132.580426] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:641] from all active usage due to RMFB ioctl

<7> [132.580499] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:539:plane 4D] because [FB:641] is removed

<7> [132.580530] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:585:pipe D] scaler_user index 3.27: Staged freeing scaler id 0 scaler_users = 0x0

<7> [132.580799] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:539:plane 4D] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [132.581029] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:539:plane 4D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [132.581269] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:539:plane 4D] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.581497] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:539:plane 4D] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.581719] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:539:plane 4D] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.581970] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:585:pipe D] data rate 0 num active planes 0

<7> [132.582214] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [132.589105] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:585:pipe D] scaler_user index 3.28: staged scaling request for 20x20->1920x1080 scaler_users = 0x10000000

<7> [132.589455] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:549:plane 5D] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.589620] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:549:plane 5D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.589778] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:549:plane 5D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.589935] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:549:plane 5D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [132.590131] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:549:plane 5D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [132.590361] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:585:pipe D] data rate 571000 num active planes 1

<7> [132.590534] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [132.590706] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [132.590898] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:585:pipe D] attached scaler id 3.0 to PLANE:549

<7> [132.597038] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:641] from all active usage due to RMFB ioctl

<7> [132.597083] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:549:plane 5D] because [FB:641] is removed

<7> [132.597106] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:585:pipe D] scaler_user index 3.28: Staged freeing scaler id 0 scaler_users = 0x0

<7> [132.597354] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:549:plane 5D] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [132.597516] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:549:plane 5D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [132.597672] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:549:plane 5D] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.597828] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:549:plane 5D] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.597982] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:549:plane 5D] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.598153] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:585:pipe D] data rate 0 num active planes 0

<7> [132.598331] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [132.605596] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:585:pipe D] scaler_user index 3.29: staged scaling request for 20x20->1920x1080 scaler_users = 0x20000000

<7> [132.605787] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:559:plane 6D] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.605941] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:559:plane 6D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.606087] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:559:plane 6D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.606229] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:559:plane 6D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [132.606428] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:559:plane 6D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [132.606694] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:585:pipe D] data rate 571000 num active planes 1

<7> [132.606938] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [132.607176] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [132.607489] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:585:pipe D] attached scaler id 3.0 to PLANE:559

<7> [132.613676] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:642] from all active usage due to RMFB ioctl

<7> [132.613720] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:559:plane 6D] because [FB:642] is removed

<7> [132.613742] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:585:pipe D] scaler_user index 3.29: Staged freeing scaler id 0 scaler_users = 0x0

<7> [132.613931] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:559:plane 6D] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [132.614091] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:559:plane 6D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [132.614260] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:559:plane 6D] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.614490] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:559:plane 6D] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.614720] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:559:plane 6D] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.614981] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:585:pipe D] data rate 0 num active planes 0

<7> [132.615223] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [132.622341] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:585:pipe D] scaler_user index 3.30: staged scaling request for 20x20->1920x1080 scaler_users = 0x40000000

<7> [132.622542] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:569:plane 7D] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.622707] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:569:plane 7D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.622865] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:569:plane 7D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.623023] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:569:plane 7D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0

<7> [132.623178] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:569:plane 7D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0

<7> [132.623379] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:585:pipe D] data rate 571000 num active planes 1

<7> [132.623558] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 571

<7> [132.623721] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [132.623913] i915 0000:00:02.0: [drm:intel_atomic_setup_scaler [i915]] [CRTC:585:pipe D] attached scaler id 3.0 to PLANE:569

<7> [132.630371] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:641] from all active usage due to RMFB ioctl

<7> [132.630412] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:569:plane 7D] because [FB:641] is removed

<7> [132.630432] i915 0000:00:02.0: [drm:skl_update_scaler [i915]] [CRTC:585:pipe D] scaler_user index 3.30: Staged freeing scaler id 0 scaler_users = 0x0

<7> [132.630617] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:569:plane 7D] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [132.630769] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:569:plane 7D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [132.630913] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:569:plane 7D] lines 3, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.631055] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:569:plane 7D] blocks 6, 17, 17, 17, 17, 23, 33, 33, 20, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.631195] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:569:plane 7D] min_ddb 8, 20, 20, 20, 20, 27, 38, 38, 21, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.631401] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:585:pipe D] data rate 0 num active planes 0

<7> [132.631567] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<6> [132.639119] [IGT] kms_plane_scaling: finished subtest pipe-D, SUCCESS

<6> [132.639808] [IGT] kms_plane_scaling: finished subtest plane-upscale-20x20-with-pixel-format, SUCCESS

<7> [132.640896] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [132.641101] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [132.641666] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [132.641910] i915 0000:00:02.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6)

<7> [132.642565] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [132.642795] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [132.643446] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [132.644291] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [132.644508] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [132.645147] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [132.645396] i915 0000:00:02.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6)

<7> [132.646026] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [132.646247] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [132.646855] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [132.647686] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [132.647907] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [132.648558] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [132.648788] i915 0000:00:02.0: [drm:intel_hdmi_hdcp_read_bksv [i915]] Read Bksv over DDC failed (-6)

<7> [132.649453] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [132.649666] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [132.650286] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 003a w(1)

<7> [132.652729] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]

<7> [132.674774] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:588:HDMI-A-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [132.675152] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24)

<7> [132.675517] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:171:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [132.676039] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:587:DDI B/PHY B] [CRTC:171:pipe A]

<7> [132.676549] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [132.677054] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [132.677604] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [132.678059] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [132.678474] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040)

<7> [132.678857] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [132.679270] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)

<7> [132.679663] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2080)

<7> [132.680048] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)

<7> [132.680456] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2080)

<7> [132.680830] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 1968)

<7> [132.681131] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2000)

<7> [132.681456] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)

<7> [132.681760] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)

<7> [132.682062] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1083)

<7> [132.682385] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1088)

<7> [132.682690] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1144)

<7> [132.682994] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1144)

<7> [132.683303] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)

<7> [132.683608] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2080)

<7> [132.683862] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)

<7> [132.684095] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2080)

<7> [132.684334] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1968)

<7> [132.684560] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2000)

<7> [132.684789] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)

<7> [132.685015] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)

<7> [132.685249] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1083)

<7> [132.685479] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1088)

<7> [132.685706] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1144)

<7> [132.685940] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1144)

<7> [132.686171] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [132.686417] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)

<7> [132.686645] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4)

<7> [132.686870] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in has_hdmi_sink (expected no, found yes)

<7> [132.687101] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in has_infoframe (expected no, found yes)

<7> [132.687488] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [132.687715] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 285500)

<7> [132.687946] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 285500)

<7> [132.688173] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in port_clock (expected 0, found 285500)

<7> [132.688420] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in infoframes.enable (expected 0x00000000, found 0x00000071)

<7> [132.688649] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in avi infoframe

<7> [132.688880] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [132.689108] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [132.689349] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [132.689382] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling

<7> [132.689398] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0

<7> [132.689402] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in spd infoframe

<7> [132.689634] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [132.689866] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [132.690096] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [132.690107] i915 0000:00:02.0: source device information: PC General (0x9)

<7> [132.690110] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:171:pipe A] fastset requirement not met in hdmi infoframe

<7> [132.690362] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [132.690593] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [132.690822] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4

<7> [132.690830] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:171:pipe A] fastset requirement not met, forcing full modeset

<7> [132.691061] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.enable (expected yes, found no)

<7> [132.691355] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.active (expected yes, found no)

<7> [132.691588] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in cpu_transcoder (expected 3, found -1)

<7> [132.691817] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in lane_count (expected 4, found 0)

<7> [132.692045] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000)

<7> [132.692287] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [132.692519] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)

<7> [132.692750] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2080, found 0)

<7> [132.692978] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)

<7> [132.693213] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2080, found 0)

<7> [132.693467] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 1968, found 0)

<7> [132.693694] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2000, found 0)

<7> [132.693921] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)

<7> [132.694151] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)

<7> [132.694397] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1083, found 0)

<7> [132.694623] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1088, found 0)

<7> [132.694849] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1144, found 0)

<7> [132.695081] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1144, found 0)

<7> [132.695318] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)

<7> [132.695547] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2080, found 0)

<7> [132.695774] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)

<7> [132.695999] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2080, found 0)

<7> [132.696226] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 1968, found 0)

<7> [132.696531] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2000, found 0)

<7> [132.696721] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)

<7> [132.696890] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)

<7> [132.697051] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1083, found 0)

<7> [132.697210] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1088, found 0)

<7> [132.697458] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1144, found 0)

<7> [132.697619] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1144, found 0)

<7> [132.697793] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [132.697950] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)

<7> [132.698107] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0)

<7> [132.698275] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in has_hdmi_sink (expected yes, found no)

<7> [132.698443] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in has_infoframe (expected yes, found no)

<7> [132.698601] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [132.698757] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 285500, found 0)

<7> [132.698912] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 285500, found 0)

<7> [132.699066] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in port_clock (expected 285500, found 0)

<7> [132.699222] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in infoframes.enable (expected 0x00000071, found 0x00000000)

<7> [132.699397] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in avi infoframe

<7> [132.699566] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [132.699760] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [132.699788] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling

<7> [132.699796] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0

<7> [132.699798] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [132.699952] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in spd infoframe

<7> [132.700114] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [132.700290] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [132.700297] i915 0000:00:02.0: source device information: PC General (0x9)

<7> [132.700299] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [132.700455] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:585:pipe D] fastset requirement not met in hdmi infoframe

<7> [132.700609] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [132.700762] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4

<7> [132.700766] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [132.700921] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:585:pipe D] fastset requirement not met, forcing full modeset

<7> [132.701098] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:585:pipe D] releasing DPLL 0

<7> [132.701365] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:171:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x8 -> 0x1

<7> [132.701536] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:585:pipe D] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x8 -> 0x1

<7> [132.701707] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [132.701861] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:165:cursor A] ddb ( 0 - 0) -> (1993 - 2048), size 0 -> 55

<7> [132.702015] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [132.702169] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [132.702376] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 129, 129, 129, 129, 177, 257, 257, 30, 0, 0

<7> [132.702534] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 143, 143, 143, 143, 196, 284, 284, 31, 0, 0

<7> [132.702698] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:579:cursor D] ddb (1993 - 2048) -> ( 0 - 0), size 55 -> 0

<7> [132.702883] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:171:pipe A] data rate 1142000 num active planes 1

<7> [132.703049] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [132.703208] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [132.703407] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:171:pipe A] min cdclk: 0 kHz -> 192000 kHz

<7> [132.703593] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:585:pipe D] min cdclk: 192000 kHz -> 0 kHz

<7> [132.703781] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 8922 kHz -> 17844 kHz

<7> [132.703951] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:171:pipe A] allocated DPLL 0

<7> [132.704124] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:171:pipe A] reserving DPLL 0

<7> [132.704307] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:171:pipe A] enable: yes [modeset]

<7> [132.704471] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [132.704631] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0

<7> [132.704822] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [132.704979] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [132.705144] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [132.705321] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [132.705477] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 1, infoframes: 1, infoframes enabled: 0x71

<7> [132.705634] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] GCP: 0x0

<7> [132.705789] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [132.705805] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling

<7> [132.705813] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0

<7> [132.705815] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [132.705820] i915 0000:00:02.0: source device information: PC General (0x9)

<7> [132.705822] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4

<7> [132.705826] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00

<7> [132.706024] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47

<7> [132.706179] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff

<7> [132.706356] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03 00

<7> [132.706522] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2

<7> [132.706677] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [132.706831] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1144, vmax: 1144, flipline: 1144, pipeline full: 61, guardband: 63 vsync start: 0, vsync end: 0

<7> [132.706987] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1144, vmax vtotal: 1144

<7> [132.707142] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [132.707311] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5

<7> [132.707509] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5

<7> [132.707664] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5

<7> [132.707827] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x40 0x5

<7> [132.707992] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5

<7> [132.708149] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 285500, pipe src: 1920x1080+0+0, pixel rate 285500, min cdclk 192000

<7> [132.708316] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 59, ips linetime: 0

<7> [132.708471] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [132.708658] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [132.708812] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [132.708976] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1801be, cfgcr1: 0x488, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [132.709142] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [132.709318] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [132.709478] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [132.709639] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [132.709827] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [132.709986] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [132.710146] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [132.710334] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [132.710490] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [132.710644] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [132.710800] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [132.710989] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [132.711156] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [132.711335] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:635] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [132.711494] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [132.711658] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [132.711813] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no

<7> [132.711966] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no

<7> [132.712149] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no

<7> [132.712327] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no

<7> [132.712488] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:plane 6A] fb: [NOFB], visible: no

<7> [132.712650] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:155:plane 7A] fb: [NOFB], visible: no

<7> [132.712809] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:165:cursor A] fb: [NOFB], visible: no

<7> [132.712969] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:585:pipe D] enable: no [modeset]

<7> [132.713126] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:449:plane 1D] fb: [NOFB], visible: no

<7> [132.713332] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:479:plane 2D] fb: [NOFB], visible: no

<7> [132.713488] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:509:plane 3D] fb: [NOFB], visible: no

<7> [132.713651] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:539:plane 4D] fb: [NOFB], visible: no

<7> [132.713814] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:549:plane 5D] fb: [NOFB], visible: no

<7> [132.713969] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:559:plane 6D] fb: [NOFB], visible: no

<7> [132.714123] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:569:plane 7D] fb: [NOFB], visible: no

<7> [132.714291] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:579:cursor D] fb: [NOFB], visible: no

<7> [132.714664] i915 0000:00:02.0: [drm:intel_audio_codec_disable [i915]] [CONNECTOR:588:HDMI-A-1][ENCODER:587:DDI B/PHY B] Disable audio codec on [CRTC:585:pipe D]

<7> [132.730247] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [132.732256] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:588:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10

<7> [132.732901] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [132.733081] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [132.733686] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [132.733849] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:588:HDMI-A-1] Failed to read TMDS config: -6

<7> [132.733866] i915 0000:00:02.0: [drm:intel_ddi_disable [i915]] [CONNECTOR:588:HDMI-A-1] Failed to reset sink scrambling/TMDS bit clock ratio

<7> [132.734046] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe D

<7> [132.739272] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [132.739472] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x8, on? 1) for [CRTC:585:pipe D]

<7> [132.739664] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [132.739839] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:587:DDI B/PHY B]

<7> [132.740000] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:597:DDI TC1/PHY TC1]

<7> [132.740163] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:599:DP-MST A]

<7> [132.740346] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:600:DP-MST B]

<7> [132.740510] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:601:DP-MST C]

<7> [132.740667] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:602:DP-MST D]

<7> [132.740825] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:607:DDI TC2/PHY TC2]

<7> [132.741001] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:609:DP-MST A]

<7> [132.741173] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:610:DP-MST B]

<7> [132.741361] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:611:DP-MST C]

<7> [132.741520] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:612:DP-MST D]

<7> [132.741681] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:616:DDI TC3/PHY TC3]

<7> [132.741836] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:618:DP-MST A]

<7> [132.741992] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:619:DP-MST B]

<7> [132.742145] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:620:DP-MST C]

<7> [132.742339] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:621:DP-MST D]

<7> [132.742494] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:625:DDI TC4/PHY TC4]

<7> [132.742648] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:627:DP-MST A]

<7> [132.742803] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:628:DP-MST B]

<7> [132.742956] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:629:DP-MST C]

<7> [132.743108] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:630:DP-MST D]

<7> [132.743486] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:171:pipe A]

<7> [132.743651] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [132.743879] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [132.744128] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [132.744463] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:588:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10

<7> [132.745117] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [132.745287] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [132.745908] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [132.746063] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:588:HDMI-A-1] Failed to read TMDS config: -6

<7> [132.746078] i915 0000:00:02.0: [drm:intel_ddi_enable [i915]] [CONNECTOR:588:HDMI-A-1] Failed to configure sink scrambling/TMDS bit clock ratio

<7> [132.749274] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1

<7> [132.749444] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:35:plane 1A]

<7> [132.754723] i915 0000:00:02.0: [drm:intel_audio_codec_enable [i915]] [CONNECTOR:588:HDMI-A-1][ENCODER:587:DDI B/PHY B] Enable audio codec on [CRTC:171:pipe A], 64 bytes ELD

<7> [132.763074] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] HDMI audio pixel clock setting for 285500 not found, falling back to defaults

<7> [132.763272] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] Configuring HDMI audio for pixel clock 25200 (0x00010000)

<7> [132.763434] i915 0000:00:02.0: [drm:hsw_audio_config_update [i915]] using automatic N

<6> [132.763600] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 5 not expected

<6> [132.763603] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 0 not expected

<6> [132.763605] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 10 not expected

<6> [132.763607] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 6 not expected

<7> [132.763756] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:588:HDMI-A-1]

<7> [132.764026] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:171:pipe A]

<7> [132.764864] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_5

<7> [132.765074] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:585:pipe D]

<7> [132.765538] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4

<7> [132.765948] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<6> [132.771533] Console: switching to colour frame buffer device 240x67

<7> [132.773142] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x810

<7> [132.777829] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL

<7> [132.777861] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled

Results for igt@kms_plane_scaling@plane-upscale-20x20-with-pixel-format