Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.36 seconds
Igt-Version
IGT-Version: 2.4-g529869b7d (x86_64) (Linux: 7.1.0-rc2-next-20260508-next-20260508-ge98d21c170b0+ x86_64)
Out
Using IGT_SRANDOM=1778248574 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.360s)
Err
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.360s)
Dmesg
<7> [216.314233] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_TC2
<6> [216.333629] Console: switching to colour dummy device 80x25
<6> [216.333939] [IGT] kms_force_connector_basic: executing
<7> [216.340992] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [216.342697] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [216.351011] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00020000, pins 0x00000400, long 0x00000000
<7> [216.351785] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [216.352499] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [216.352732] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_TC2
<7> [216.357957] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [216.359256] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [216.360376] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:529:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [216.360386] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [216.360394] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [216.364594] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [216.364622] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [216.364625] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [216.368846] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [216.368897] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [216.368900] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [216.373133] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<6> [216.373385] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [216.373630] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:529:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [216.373636] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [216.373639] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [216.432639] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [216.438315] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [216.438335] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [216.438596] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [216.442169] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_TC2
<7> [216.444126] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [216.444131] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [216.444266] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] status updated from disconnected to connected
<7> [216.444313] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] probed modes:
<7> [216.444317] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [216.444321] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [216.444325] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [216.444329] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [216.444332] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [216.444347] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [216.444412] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [216.444439] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [216.444443] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [216.450199] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00020000, pins 0x00000400, long 0x00000000
<7> [216.450967] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [216.451692] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [216.452093] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_TC2
<7> [216.456961] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [216.504105] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [216.509754] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [216.509761] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [216.509883] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [216.515332] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [216.515337] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [216.515963] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] probed modes:
<7> [216.515967] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [216.515970] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [216.515973] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [216.515976] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [216.515978] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [216.518959] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:529:HDMI-A-1] EDID override set
<7> [216.518978] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [216.518982] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [216.519156] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:529:HDMI-A-1] ELD monitor IGT
<7> [216.519159] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:529:HDMI-A-1] ELD size 24, SAD count 0
<7> [216.548141] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00020000, pins 0x00000400, long 0x00000000
<7> [216.548907] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [216.549642] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [216.553660] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 20 00 00
<7> [216.558154] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff8881521a9c20 (2)
<7> [216.559097] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff8881521a9c20 (1)
<7> [216.559107] i915 0000:00:02.0: [drm:drm_dp_mst_hpd_irq_handle_event [drm_display_helper]] Got RSN: pn: 2 avail_pbn 0
<7> [216.559265] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff8881521a9c20 (2)
<7> [216.559276] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff8881521a9c20 (1)
<7> [216.563876] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [216.580634] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [216.586399] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [216.586496] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [216.586504] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [216.586509] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] probed modes:
<7> [216.586512] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [216.586515] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [216.586518] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [216.586521] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [216.586524] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [216.586527] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [216.586624] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:529:HDMI-A-1] EDID override set
<7> [216.586642] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [216.586645] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [216.586811] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:529:HDMI-A-1] ELD monitor IGT
<7> [216.586813] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:529:HDMI-A-1] ELD size 24, SAD count 0
<7> [216.586816] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:529:HDMI-A-1] EDID changed, epoch counter 4
<7> [216.645632] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [216.646607] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00020000, pins 0x00000400, long 0x00000000
<7> [216.647372] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [216.648139] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [216.651746] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [216.651871] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [216.651880] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] probed modes:
<7> [216.651885] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [216.651889] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [216.651892] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [216.651895] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [216.651898] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [216.652007] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:529:HDMI-A-1] EDID override reset
<7> [216.652030] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [216.652034] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [216.653854] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 20 00 00
<7> [216.659318] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff8881521a9c20 (2)
<7> [216.660407] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff8881521a9c20 (1)
<7> [216.660417] i915 0000:00:02.0: [drm:drm_dp_mst_hpd_irq_handle_event [drm_display_helper]] Got RSN: pn: 2 avail_pbn 0
<7> [216.660641] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff8881521a9c20 (2)
<7> [216.660651] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff8881521a9c20 (1)
<7> [216.665719] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [216.713093] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [216.718804] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [216.718817] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [216.719045] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [216.724777] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [216.724789] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [216.724946] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:529:HDMI-A-1] EDID changed, epoch counter 5
<7> [216.724997] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [216.725004] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [216.725009] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] probed modes:
<7> [216.725012] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [216.725015] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [216.725018] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [216.725022] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [216.725025] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [216.725155] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:529:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [216.725160] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [216.725164] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [216.729421] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] status updated from connected to disconnected
<7> [216.729443] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [216.729526] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [216.729535] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [216.729853] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [216.729931] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [216.733911] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<6> [216.734295] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [216.734647] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [216.735662] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:508:eDP-1] force updated from 0 to 0 or reprobing
<7> [216.735668] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [216.735672] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:508:eDP-1]
<7> [216.736263] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [216.736679] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [216.736809] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [216.736937] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [216.737094] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [216.737098] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [216.737101] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [216.737112] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] VRR capable: no
<7> [216.737239] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [216.737364] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [216.737822] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [216.737826] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [216.737850] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [216.737853] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:508:eDP-1]
<7> [216.738428] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [216.738873] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [216.739000] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [216.739147] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [216.739285] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [216.739288] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [216.739291] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [216.739301] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] VRR capable: no
<7> [216.739427] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [216.739554] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [216.739994] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [216.739997] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [216.740078] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:508:eDP-1] EDID override reset
<7> [216.740090] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [216.740094] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:508:eDP-1]
<7> [216.740644] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [216.741040] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [216.741180] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [216.741304] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [216.741439] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [216.741442] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [216.741444] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [216.741453] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] VRR capable: no
<7> [216.741581] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [216.741706] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [216.742140] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [216.742143] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [216.742217] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:517:DP-1] EDID override reset
<7> [216.742227] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:DP-1]
<7> [216.742231] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:517:DP-1]
<7> [216.744521] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00020000, pins 0x00000400, long 0x00000000
<7> [216.745447] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [216.746239] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [216.746437] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:DP-1] disconnected
<7> [216.746546] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:529:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [216.746551] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [216.746555] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [216.750686] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [216.750786] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [216.750806] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [216.750809] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [216.755011] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [216.755080] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:529:HDMI-A-1] EDID override reset
<7> [216.755092] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [216.755095] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [216.759280] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [216.759344] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:535:DP-2] EDID override reset
<7> [216.759354] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2]
<7> [216.759357] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:535:DP-2]
<7> [216.759607] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2] disconnected
<7> [216.759665] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:544:DP-3] EDID override reset
<7> [216.759674] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:DP-3]
<7> [216.759677] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:544:DP-3]
<7> [216.762868] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: DPCD: 12 0a c4 01 00 05 01 83 02 00 00 00 00 00 04
<7> [216.769301] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:544:DP-3][ENCODER:543:DDI TC2/PHY TC2][DPRX] LTTPR common capabilities: 20 1e 80 aa 04 00 01 03
<7> [216.771110] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_TC2
<7> [216.771505] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_TC2
<7> [216.773628] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:544:DP-3][ENCODER:543:DDI TC2/PHY TC2][LTTPR 1] PHY capabilities: 04 03 00
<7> [216.774725] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: LTTPR 1: OUI 98-4f-ee dev-ID GBR HW-rev 10.0 SW-rev 2.14 quirks 0x0000
<7> [216.776996] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: DPCD: 12 0a c4 01 00 05 01 83 02 00 00 00 00 00 04
<7> [216.779195] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: DP branch: OUI 90-cc-24 dev-ID SYNA#" HW-rev 1.0 SW-rev 2.27 quirks 0x0028
<7> [216.785144] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: DPCD DFP: 08 08 0d
<7> [216.787113] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:543:DDI TC2/PHY TC2] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [216.801292] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000, 2000000
<7> [216.801444] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
<7> [216.801593] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
<7> [216.801735] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:DP-3] disconnected
<7> [216.801812] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:553:DP-4] EDID override reset
<7> [216.801824] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:553:DP-4]
<7> [216.801828] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:553:DP-4]
<7> [216.802074] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:553:DP-4] disconnected
<7> [216.802142] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:562:DP-5] EDID override reset
<7> [216.802155] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:562:DP-5]
<7> [216.802158] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:562:DP-5]
<7> [216.802417] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:562:DP-5] disconnected
<7> [216.802493] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:573:DP-6] EDID override reset
<7> [216.802505] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:573:DP-6]
<7> [216.802511] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff8881521f9000 (2)
<7> [216.802525] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff8881521f9000 (1)
<7> [216.802536] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff8881521f9000 (2)
<7> [216.802550] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff8881521a9c20 (2)
<7> [216.842319] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00020000, pins 0x00000400, long 0x00000000
<7> [216.843085] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [216.843747] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [216.848520] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [216.851014] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff8881521a9c20 (3)
<7> [216.851034] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff8881521a9c20 (2)
<7> [216.851065] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff8881521a9c20 (1)
<7> [216.851088] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff8881521a9c20 (2)
<7> [216.856981] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [216.903164] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [216.908326] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [216.911133] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff8881521a9c20 (3)
<7> [216.915626] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff8881521a9c20 (2)
<7> [216.920388] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [216.940595] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00020000, pins 0x00000400, long 0x00000000
<7> [216.941363] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [216.942076] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [216.946516] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [216.948873] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff8881521a9c20 (3)
<7> [216.953242] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff8881521a9c20 (2)
<7> [216.957979] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [216.960326] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff8881521a9c20 (3)
<7> [216.964757] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff8881521a9c20 (2)
<7> [216.964790] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff8881521a9c20 (1)
<7> [216.964826] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff8881521f9000 (1)
<7> [216.964844] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:573:DP-6] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [216.964851] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:573:DP-6] ELD monitor DELL U2412M
<7> [216.964855] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:573:DP-6] ELD size 32, SAD count 0
<7> [216.965064] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:573:DP-6] probed modes:
<7> [216.965071] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [216.965077] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [216.965082] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
<7> [216.965087] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
<7> [216.965092] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [216.965097] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [216.965102] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [216.965108] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [216.965113] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [216.965118] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
<7> [216.965288] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:575:DP-7] EDID override reset
<7> [216.965313] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:575:DP-7]
<7> [216.965323] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff8881425f4000 (2)
<7> [216.965341] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff8881425f4000 (1)
<7> [216.965356] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff8881425f4000 (2)
<7> [216.965375] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff8881521a9c20 (2)
<7> [216.970864] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [216.973470] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff8881521a9c20 (3)
<7> [216.973489] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff8881521a9c20 (2)
<7> [216.973501] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff8881521a9c20 (2)
<7> [216.973518] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff8881521a9c20 (2)
<7> [216.979353] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [216.981731] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff8881521a9c20 (3)
<7> [216.986192] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff8881521a9c20 (2)
<7> [216.991030] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [216.993429] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff8881521a9c20 (3)
<7> [216.997928] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff8881521a9c20 (2)
<7> [217.002731] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [217.005106] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff8881521a9c20 (3)
<7> [217.009500] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff8881521a9c20 (2)
<7> [217.009513] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff8881521a9c20 (1)
<7> [217.009534] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff8881425f4000 (1)
<7> [217.009546] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:575:DP-7] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [217.009550] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:575:DP-7] ELD monitor DELL U2412M
<7> [217.009553] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:575:DP-7] ELD size 32, SAD count 0
<7> [217.009667] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:575:DP-7] probed modes:
<7> [217.009671] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [217.009676] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [217.009680] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
<7> [217.009684] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
<7> [217.009688] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [217.009692] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [217.009695] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [217.009699] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [217.009703] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [217.009706] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
<7> [217.009817] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:577:DP-8] EDID override reset
<7> [217.009833] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:577:DP-8]
<7> [217.009839] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff888152519000 (2)
<7> [217.010222] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff888152519000 (1)
<7> [217.010240] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:577:DP-8] disconnected
<6> [217.011001] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [217.011790] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [217.014628] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [217.014807] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [217.018960] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [217.025425] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [217.025431] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [217.025502] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [217.025506] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:508:eDP-1]
<7> [217.026102] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [217.026543] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [217.026695] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [217.026845] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [217.027007] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [217.027011] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [217.027014] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [217.027026] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] VRR capable: no
<7> [217.027186] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [217.027310] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [217.027743] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [217.027748] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [217.027753] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:DP-1]
<7> [217.027757] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:517:DP-1]
<7> [217.031987] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:DP-1] disconnected
<7> [217.031992] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [217.031995] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [217.036256] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [217.036261] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2]
<7> [217.036264] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:535:DP-2]
<7> [217.036532] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2] disconnected
<7> [217.036536] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:DP-3]
<7> [217.036539] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:544:DP-3]
<7> [217.038789] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00020000, pins 0x00000400, long 0x00000000
<7> [217.039011] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [217.039239] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [217.039809] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: DPCD: 12 0a c4 01 00 05 01 83 02 00 00 00 00 00 04
<7> [217.043730] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [217.050315] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:544:DP-3][ENCODER:543:DDI TC2/PHY TC2][DPRX] LTTPR common capabilities: 20 1e 80 aa 04 00 01 03
<7> [217.052947] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:544:DP-3][ENCODER:543:DDI TC2/PHY TC2][LTTPR 1] PHY capabilities: 04 03 00
<7> [217.054103] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: LTTPR 1: OUI 98-4f-ee dev-ID GBR HW-rev 10.0 SW-rev 2.14 quirks 0x0000
<7> [217.056380] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: DPCD: 12 0a c4 01 00 05 01 83 02 00 00 00 00 00 04
<7> [217.058575] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: DP branch: OUI 90-cc-24 dev-ID SYNA#" HW-rev 1.0 SW-rev 2.27 quirks 0x0028
<7> [217.064621] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: DPCD DFP: 08 08 0d
<7> [217.066678] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:543:DDI TC2/PHY TC2] MST support: port: yes, sink: MST, modparam: yes -> enable: MST
<7> [217.080935] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000, 2000000
<7> [217.081100] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
<7> [217.081248] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
<7> [217.081396] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:DP-3] disconnected
<7> [217.081402] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:553:DP-4]
<7> [217.081406] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:553:DP-4]
<7> [217.081686] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:553:DP-4] disconnected
<7> [217.081690] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:562:DP-5]
<7> [217.081693] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:562:DP-5]
<7> [217.081926] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:562:DP-5] disconnected
<7> [217.081929] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:573:DP-6]
<7> [217.081933] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff8881521f9000 (2)
<7> [217.081945] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff8881521f9000 (1)
<7> [217.081954] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff8881521f9000 (2)
<7> [217.081965] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff8881521a9c20 (2)
<7> [217.122171] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_TC2
<7> [217.133155] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [217.133657] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_TC2
<7> [217.136846] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00020000, pins 0x00000400, long 0x00000000
<7> [217.137825] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [217.140824] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [217.143279] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff8881521a9c20 (3)
<7> [217.143293] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff8881521a9c20 (2)
<7> [217.143314] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff8881521a9c20 (1)
<7> [217.143339] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff8881521a9c20 (2)
<7> [217.149103] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [217.151430] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff8881521a9c20 (3)
<7> [217.155840] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff8881521a9c20 (2)
<7> [217.160599] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [217.160758] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [217.164810] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [217.167169] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff8881521a9c20 (3)
<7> [217.171638] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff8881521a9c20 (2)
<7> [217.176494] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [217.178921] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff8881521a9c20 (3)
<7> [217.183356] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff8881521a9c20 (2)
<7> [217.183371] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff8881521a9c20 (2)
<7> [217.183396] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff8881521f9000 (1)
<7> [217.183411] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:573:DP-6] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [217.183440] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:573:DP-6] ELD monitor DELL U2412M
<7> [217.183444] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:573:DP-6] ELD size 32, SAD count 0
<7> [217.183587] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:573:DP-6] probed modes:
<7> [217.183592] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [217.183597] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [217.183601] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
<7> [217.183605] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
<7> [217.183609] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [217.183613] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [217.183617] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [217.183621] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [217.183625] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [217.183629] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
<7> [217.183634] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:575:DP-7]
<7> [217.183640] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff8881425f4000 (2)
<7> [217.183653] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff8881425f4000 (1)
<7> [217.183665] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff8881425f4000 (2)
<7> [217.183676] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff8881425f4000 (1)
<7> [217.183687] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff8881425f4000 (2)
<7> [217.183699] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff8881521a9c20 (2)
<7> [217.189295] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [217.191672] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff8881521a9c20 (3)
<7> [217.191688] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff8881521a9c20 (2)
<7> [217.191702] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff8881521a9c20 (2)
<7> [217.191728] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff8881521a9c20 (2)
<7> [217.197539] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [217.199836] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff8881521a9c20 (3)
<7> [217.204228] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff8881521a9c20 (2)
<7> [217.209107] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [217.211518] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff8881521a9c20 (3)
<7> [217.215986] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff8881521a9c20 (2)
<7> [217.220764] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 10 00 00
<7> [217.223190] i915 0000:00:02.0: [drm:drm_dp_mst_topology_try_get_mstb [drm_display_helper]] mstb ffff8881521a9c20 (3)
<7> [217.227616] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff8881521a9c20 (2)
<7> [217.227631] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_mstb [drm_display_helper]] mstb ffff8881521a9c20 (1)
<7> [217.227652] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff8881425f4000 (1)
<7> [217.227664] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:575:DP-7] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [217.227668] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:575:DP-7] ELD monitor DELL U2412M
<7> [217.227671] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:575:DP-7] ELD size 32, SAD count 0
<7> [217.227782] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:575:DP-7] probed modes:
<7> [217.227787] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [217.227792] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [217.227796] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
<7> [217.227801] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
<7> [217.228068] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [217.228075] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [217.228081] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [217.228086] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [217.228091] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [217.228096] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
<7> [217.228101] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:577:DP-8]
<7> [217.228110] i915 0000:00:02.0: [drm:drm_dp_mst_topology_get_port_validated [drm_display_helper]] port ffff888152519000 (2)
<7> [217.228128] i915 0000:00:02.0: [drm:drm_dp_mst_topology_put_port [drm_display_helper]] port ffff888152519000 (1)
<7> [217.228143] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:577:DP-8] disconnected
<7> [217.228149] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:eDP-1] enabled? yes
<7> [217.228154] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:517:DP-1] enabled? no
<7> [217.228158] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:529:HDMI-A-1] enabled? no
<7> [217.228162] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:535:DP-2] enabled? no
<7> [217.228166] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:544:DP-3] enabled? no
<7> [217.228170] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:553:DP-4] enabled? no
<7> [217.228174] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:562:DP-5] enabled? no
<7> [217.228178] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:573:DP-6] enabled? yes
<7> [217.228182] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:575:DP-7] enabled? yes
<7> [217.228186] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:577:DP-8] enabled? no
<7> [217.228226] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [217.228243] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:eDP-1] found preferred mode: 2880x1800
<7> [217.228251] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:573:DP-6] found preferred mode: 1920x1200
<7> [217.228259] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:575:DP-7] found preferred mode: 1920x1200
<7> [217.228263] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7> [217.228422] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:151:pipe A] desired mode 2880x1800 set (0,0)
<7> [217.228432] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:269:pipe B] desired mode 1920x1200 set (0,0)
<7> [217.228439] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:387:pipe C] desired mode 1920x1200 set (0,0)
<7> [217.232692] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [217.235175] i915 0000:00:02.0: [drm:xelpdp_pica_irq_handler [i915]] pica hotplug event received, stat 0x00020000, pins 0x00000400, long 0x00000000
<7> [217.235415] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [217.235649] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:543:DDI TC2/PHY TC2] - short
<7> [217.239745] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] DPRX ESI: 02 00 00 00
<7> [217.242305] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [217.258430] Console: switching to colour frame buffer device 180x56
Created at 2026-05-08 14:14:51