Results for igt@kms_force_connector_basic@force-edid

Result: Pass

git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.29 seconds
Igt-Version 
IGT-Version: 2.4-g4963e78e0 (x86_64) (Linux: 7.0.0-next-20260422-next-20260422-g70c8a7ec6715+ x86_64)
Out 
Using IGT_SRANDOM=1776863914 for randomisation
Opened device: /dev/dri/card0
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.290s)
Err 
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.290s)
Dmesg
<6> [177.758490] Console: switching to colour dummy device 80x25
<6> [177.758745] [IGT] kms_force_connector_basic: executing
<7> [177.772395] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [177.774123] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [177.786308] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [177.788849] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:529:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [177.788865] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [177.788879] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [177.793269] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [177.793298] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [177.793302] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [177.797527] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [177.797562] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [177.797565] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [177.801772] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<6> [177.802002] [IGT] kms_force_connector_basic: starting subtest force-edid
<7> [177.802365] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:529:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [177.802370] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [177.802373] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [177.861014] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [177.866657] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [177.866671] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [177.866993] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [177.872604] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [177.872613] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [177.872919] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] status updated from disconnected to connected
<7> [177.872976] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [177.873039] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [177.873059] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] probed modes:
<7> [177.873064] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [177.873070] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [177.873077] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [177.873082] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [177.873088] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [177.873120] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [177.873125] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [177.932007] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [177.937592] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [177.937603] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [177.937894] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [177.943289] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [177.943295] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [177.943458] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] probed modes:
<7> [177.943461] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [177.943464] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [177.943467] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [177.943470] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [177.943472] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [177.943758] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:529:HDMI-A-1] EDID override set
<7> [177.943775] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [177.943778] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [177.944063] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:529:HDMI-A-1] ELD monitor IGT
<7> [177.944067] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:529:HDMI-A-1] ELD size 24, SAD count 0
<7> [178.004540] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [178.010168] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [178.010286] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [178.010297] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [178.010303] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] probed modes:
<7> [178.010306] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [178.010310] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [178.010313] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [178.010316] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [178.010319] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [178.010408] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:529:HDMI-A-1] EDID override reset
<7> [178.010570] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [178.010573] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [178.071541] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [178.077235] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [178.077247] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [178.077565] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [178.083177] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [178.083183] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [178.083328] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:529:HDMI-A-1] EDID changed, epoch counter 2
<7> [178.083378] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [178.083386] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [178.083393] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] probed modes:
<7> [178.083396] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [178.083400] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [178.083403] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [178.083406] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [178.083410] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [178.083559] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:529:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [178.083563] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [178.083566] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [178.087817] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] status updated from connected to disconnected
<7> [178.087825] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [178.087846] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [178.087886] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [178.087909] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [178.087912] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [178.092171] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<6> [178.092442] [IGT] kms_force_connector_basic: finished subtest force-edid, SUCCESS
<7> [178.092897] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [178.094081] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:508:eDP-1] force updated from 0 to 0 or reprobing
<7> [178.094088] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [178.094091] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:508:eDP-1]
<7> [178.094669] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [178.095067] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [178.095204] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [178.095329] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [178.095470] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 60 Hz
<7> [178.095473] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [178.095476] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [178.095478] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [178.095489] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] VRR capable: yes
<7> [178.095620] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [178.095744] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [178.096397] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [178.096402] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2400": 60 596200 3840 3888 3920 4000 2400 2403 2408 2484 0x48 0xa
<7> [178.096424] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [178.096427] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:508:eDP-1]
<7> [178.097116] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [178.097509] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [178.097639] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [178.097765] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [178.097905] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 60 Hz
<7> [178.097909] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [178.097911] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [178.097913] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [178.097922] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] VRR capable: yes
<7> [178.098069] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [178.098200] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [178.098628] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [178.098631] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2400": 60 596200 3840 3888 3920 4000 2400 2403 2408 2484 0x48 0xa
<7> [178.098705] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:508:eDP-1] EDID override reset
<7> [178.098716] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [178.098719] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:508:eDP-1]
<7> [178.099254] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [178.099637] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [178.099770] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [178.099899] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [178.100065] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 60 Hz
<7> [178.100069] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [178.100071] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [178.100073] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [178.100082] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] VRR capable: yes
<7> [178.100212] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [178.100344] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [178.100775] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [178.100779] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2400": 60 596200 3840 3888 3920 4000 2400 2403 2408 2484 0x48 0xa
<7> [178.100853] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:517:DP-1] EDID override reset
<7> [178.100865] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:DP-1]
<7> [178.100868] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:517:DP-1]
<7> [178.105091] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:DP-1] disconnected
<7> [178.105198] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:529:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [178.105202] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [178.105206] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [178.109426] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [178.109445] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [178.109448] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [178.113670] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [178.113732] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:529:HDMI-A-1] EDID override reset
<7> [178.113743] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [178.113746] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [178.117943] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [178.118026] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:535:DP-2] EDID override reset
<7> [178.118040] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2]
<7> [178.118043] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:535:DP-2]
<7> [178.118313] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2] disconnected
<7> [178.118377] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:544:DP-3] EDID override reset
<7> [178.118388] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:DP-3]
<7> [178.118391] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:544:DP-3]
<7> [178.118638] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:DP-3] disconnected
<7> [178.118697] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:553:DP-4] EDID override reset
<7> [178.118707] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:553:DP-4]
<7> [178.118710] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:553:DP-4]
<7> [178.118957] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:553:DP-4] disconnected
<7> [178.119016] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:562:DP-5] EDID override reset
<7> [178.119027] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:562:DP-5]
<7> [178.119030] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:562:DP-5]
<7> [178.119276] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:562:DP-5] disconnected
<6> [178.119673] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [178.120120] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [178.137628] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [178.137634] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [178.137689] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [178.137693] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:508:eDP-1]
<7> [178.138335] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [178.138810] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [178.138944] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [178.139095] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [178.139242] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 60 Hz
<7> [178.139245] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [178.139248] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [178.139251] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [178.139265] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] VRR capable: yes
<7> [178.139396] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [178.139525] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [178.139990] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [178.139995] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2400": 60 596200 3840 3888 3920 4000 2400 2403 2408 2484 0x48 0xa
<7> [178.139999] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:DP-1]
<7> [178.140002] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:517:DP-1]
<7> [178.144228] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:DP-1] disconnected
<7> [178.144238] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [178.144245] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [178.148601] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [178.148606] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2]
<7> [178.148610] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:535:DP-2]
<7> [178.148882] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2] disconnected
<7> [178.148886] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:DP-3]
<7> [178.148889] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:544:DP-3]
<7> [178.149175] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:DP-3] disconnected
<7> [178.149179] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:553:DP-4]
<7> [178.149182] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:553:DP-4]
<7> [178.149442] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:553:DP-4] disconnected
<7> [178.149446] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:562:DP-5]
<7> [178.149448] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:562:DP-5]
<7> [178.149706] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:562:DP-5] disconnected
<7> [178.149709] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:eDP-1] enabled? yes
<7> [178.149713] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:517:DP-1] enabled? no
<7> [178.149716] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:529:HDMI-A-1] enabled? no
<7> [178.149718] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:535:DP-2] enabled? no
<7> [178.149720] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:544:DP-3] enabled? no
<7> [178.149723] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:553:DP-4] enabled? no
<7> [178.149725] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:562:DP-5] enabled? no
<7> [178.149750] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [178.149765] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:eDP-1] found preferred mode: 3840x2400
<7> [178.149768] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3840x2400 config
<7> [178.149780] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:151:pipe A] desired mode 3840x2400 set (0,0)
<7> [178.154250] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [178.171155] Console: switching to colour frame buffer device 240x75
Created at 2026-04-23 00:03:38