igt@i915_pm_rpm@module-reload on fi-skl-6600u@next-20260420 Test details

Detail	Value
Duration	13.14 seconds
Igt-Version	IGT-Version: 2.4-g5b279a8b7 (x86_64) (Linux: 7.0.0-next-20260420-next-20260420-g97e797263a5e+ x86_64)
Out	Using IGT_SRANDOM=1776690960 for randomisation Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff8881125017b8 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] hsw_get_pipe_config+0x1b9/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x730 [i915] intel_atomic_commit_tail+0x1744/0x20c0 [i915] intel_atomic_commit+0x2ff/0x350 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x548/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 __x64_sys_ioctl+0xa5/0x100 Starting subtest: module-reload Reloading i915 with disable_display=1 mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 2 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff88811b2a97b8 has 1/2 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get+0x1a/0x30 [i915] intel_display_rpm_get+0x1f/0x30 [i915] intel_display_power_get+0x22/0x70 [i915] intel_audio_component_get_power+0x2f/0x180 [i915] snd_hdac_display_power+0x8a/0x1b0 [snd_hda_core] azx_probe_continue+0x25e/0xb20 [snd_hda_intel] azx_probe_work+0x15/0x20 [snd_hda_intel] process_one_work+0x239/0x740 worker_thread+0x200/0x3f0 kthread+0x10d/0x150 ret_from_fork+0x3bd/0x470 ret_from_fork_asm+0x1a/0x30 ref_tracker: intel_runtime_pm@ffff88811b2a97b8 has 1/2 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get+0x1a/0x30 [i915] intel_display_rpm_get+0x1f/0x30 [i915] intel_display_power_get+0x22/0x70 [i915] intel_pps_vdd_on_unlocked+0xbd/0x360 [i915] intel_dp_aux_xfer+0x12b/0x9a0 [i915] intel_dp_aux_transfer+0xd4/0x330 [i915] drm_dp_dpcd_access+0xc3/0x160 [drm_display_helper] drm_dp_dpcd_read+0x87/0x160 [drm_display_helper] drm_dp_read_dpcd_caps+0x35/0x210 [drm_display_helper] intel_dp_init_connector+0x9fc/0x1530 [i915] intel_ddi_init+0xc94/0x1200 [i915] intel_bios_for_each_encoder+0x39/0x60 [i915] intel_setup_outputs+0x210/0xc20 [i915] intel_display_driver_probe_nogem+0x110/0x1e0 [i915] Reloading i915 with mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff88811a03d7b8 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] hsw_get_pipe_config+0x1b9/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x730 [i915] intel_atomic_commit_tail+0x1744/0x20c0 [i915] intel_atomic_commit+0x2ff/0x350 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x548/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 __x64_sys_ioctl+0xa5/0x100 Subtest module-reload: SUCCESS (13.141s)
Err	Starting subtest: module-reload Subtest module-reload: SUCCESS (13.141s)
Dmesg	<6> [279.179252] Console: switching to colour dummy device 80x25 <6> [279.180636] [IGT] i915_pm_rpm: executing <7> [279.184351] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [279.185182] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] <7> [279.185195] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1] <7> [279.185897] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [279.186224] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [279.186497] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [279.186818] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [279.186830] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor <7> [279.186838] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0 <7> [279.186876] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no <7> [279.187245] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [279.187530] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [279.188791] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes: <7> [279.188801] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [279.188809] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [279.188926] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] <7> [279.188934] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [279.193393] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected <7> [279.193507] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] <7> [279.193516] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [279.194464] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [279.194876] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [279.195420] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [279.196392] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [279.196403] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [279.196735] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [279.200094] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [279.200105] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [279.200424] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected <7> [279.200511] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] <7> [279.200519] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [279.204911] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected <7> [279.204992] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] <7> [279.205000] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [279.205519] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [279.205797] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [279.206254] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [279.206527] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [279.206535] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [279.206808] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [279.209869] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [279.209878] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [279.210162] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected <7> [279.218635] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] <7> [279.218652] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [279.223230] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected <7> [279.224167] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] <7> [279.224181] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [279.224851] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [279.225213] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [279.225745] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [279.226173] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [279.226184] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [279.226542] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [279.229814] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [279.229825] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [279.230234] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected <7> [279.231194] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] <7> [279.231207] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [279.235688] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected <7> [279.236577] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] <7> [279.236596] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [279.237251] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [279.237602] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [279.238166] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [279.238573] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [279.238583] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [279.238960] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [279.242171] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [279.242182] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [279.242593] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected <7> [279.243353] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] <7> [279.243365] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1] <7> [279.243824] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [279.244201] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [279.244556] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [279.244996] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [279.245008] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor <7> [279.245016] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0 <7> [279.245054] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no <7> [279.245424] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [279.245797] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [279.246821] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes: <7> [279.246833] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [279.246845] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [279.246891] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] <7> [279.246902] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [279.251415] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected <7> [279.251459] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] <7> [279.251470] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [279.252158] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [279.252517] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [279.253118] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [279.253502] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [279.253512] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [279.253877] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [279.257114] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [279.257125] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [279.257546] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected <7> [279.257588] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] <7> [279.257598] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [279.262083] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected <7> [279.262124] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] <7> [279.262134] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [279.262787] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [279.263148] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [279.263692] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [279.264106] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [279.264116] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [279.264463] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [279.267668] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [279.267678] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [279.268122] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected <7> [279.268860] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:145] <7> [279.427159] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [280.315660] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:59:pipe A] <7> [280.316163] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [280.317225] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [280.318021] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [280.318299] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [280.318575] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [280.318898] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [280.319190] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [280.319465] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [280.319761] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [280.320056] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [280.320330] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [280.320604] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [280.320932] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [280.321220] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [280.321494] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [280.321795] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [280.322089] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [280.322364] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [280.322639] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [280.322931] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [280.323233] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [280.323515] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [280.323828] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [280.324127] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [280.324399] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [280.324771] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [280.325111] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [280.325388] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [280.325750] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [280.326100] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [280.326378] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [280.326708] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [280.327101] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [280.327482] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [280.327878] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [280.328263] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [280.328655] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [280.329080] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [280.329466] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [280.329852] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset <7> [280.330174] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:59:pipe A] releasing DPLL 0 <7> [280.330493] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [280.330810] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [280.331124] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [280.331416] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [280.331710] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [280.332039] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [280.332304] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [280.332569] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [280.332965] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [280.333322] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz <7> [280.333638] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [280.333936] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [280.334319] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [280.334670] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [modeset] <7> [280.334993] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no <7> [280.335393] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no <7> [280.335801] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no <7> [280.336432] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [280.338206] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [280.546088] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 0 <7> [280.549028] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [280.564096] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power off <7> [280.566215] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [280.567206] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - short <7> [280.571628] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power off time <7> [280.573580] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [280.622508] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [280.623917] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [280.625225] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long <7> [280.626515] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [280.629117] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [280.631953] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:110:DDI A/PHY A] <7> [280.631970] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:59:pipe A] <7> [280.633389] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A] <7> [280.636152] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [280.637713] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [280.640990] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A] <7> [280.642453] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B] <7> [280.643848] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A] <7> [280.645209] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B] <7> [280.646565] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C] <7> [280.647921] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C] <7> [280.648924] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A] <7> [280.650174] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B] <7> [280.651532] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C] <7> [280.652889] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1] <7> [280.655496] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A] <7> [280.658054] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:84:pipe B] <7> [280.658992] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:109:pipe C] <7> [280.762316] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [280.765747] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [280.767388] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [280.769365] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [280.772457] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [280.792269] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [280.871011] i915 0000:00:02.0: [drm:compute_baseline_pipe_bpp [i915]] [CONNECTOR:111:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [280.872135] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:110:DDI A/PHY A][CRTC:59:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [280.873154] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000 <7> [280.874341] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [280.876236] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:110:DDI A/PHY A] [CRTC:59:pipe A] <7> [280.877221] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [280.878393] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [280.879714] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [280.881086] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [280.882544] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [280.883881] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [280.885108] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [280.886281] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [280.887357] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [280.888526] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [280.889805] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [280.891107] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [280.892407] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [280.893524] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [280.894542] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [280.895711] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [280.896758] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [280.897952] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [280.898991] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [280.900190] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [280.901440] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [280.902689] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [280.903705] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [280.904907] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [280.905921] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [280.907059] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [280.908063] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [280.909230] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [280.910365] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [280.911594] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [280.912679] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [280.913769] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [280.914778] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [280.915921] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [280.917072] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [280.918236] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [280.919275] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [280.920557] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [280.921626] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [280.922815] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset <7> [280.924064] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [280.925198] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [280.926168] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [280.927270] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [280.928261] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [280.929392] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [280.930462] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [280.931507] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [280.932979] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [280.934491] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [280.935877] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [280.937227] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [280.938602] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [280.939730] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:59:pipe A] allocated DPLL 0 <7> [280.940745] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:59:pipe A] reserving DPLL 0 <7> [280.942197] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: yes [modeset] <7> [280.943578] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [280.944952] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [280.946331] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [280.947701] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [280.949030] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [280.950346] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [280.951425] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [280.952626] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [280.953620] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [280.954821] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [280.955854] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [280.957002] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [280.958003] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [280.959186] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [280.960396] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [280.961742] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [280.963094] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [280.964435] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [280.965827] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [280.966880] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [280.967857] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [280.969182] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [280.970091] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [280.970989] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [280.971911] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [280.972832] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [280.973457] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [280.974191] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [280.975115] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [280.976026] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [280.976928] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [280.977854] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [280.978540] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [280.979214] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [280.979799] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [280.980283] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [280.980793] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [280.981339] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [280.981845] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [280.982386] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [280.982884] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [280.983425] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [280.984051] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [280.984609] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:112] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [280.985150] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [280.985738] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [280.986208] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no <7> [280.986731] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no <7> [280.998744] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [281.007921] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [281.008509] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [281.010009] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [281.010812] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [281.012507] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [281.013557] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A] <7> [281.013989] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B] <7> [281.014383] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A] <7> [281.014751] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B] <7> [281.015105] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C] <7> [281.015457] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C] <7> [281.015828] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A] <7> [281.016192] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B] <7> [281.016542] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C] <7> [281.017179] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:59:pipe A] <7> [281.017558] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [281.018220] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power on <7> [281.018730] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (105 ms remaining) <7> [281.130043] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [281.201297] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [281.202426] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power on <7> [281.205172] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003 <7> [281.253062] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [281.254122] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long <7> [281.255109] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [281.257886] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A] <7> [281.409814] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [281.411141] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [281.412696] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [281.416494] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turning VDD on <7> [281.417812] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b <7> [281.423039] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [281.424256] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [281.428263] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [281.429447] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [281.431008] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [281.433992] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Clock recovery OK <7> [281.435128] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [281.436251] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [281.439808] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [281.440962] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [281.442239] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [281.446469] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [281.448074] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [281.449470] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [281.453185] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [281.454655] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [281.457073] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [281.460190] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [281.461217] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [281.463968] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 37 <7> [281.476064] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [281.482520] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1] <7> [281.484016] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A] <7> [281.488054] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [281.488670] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <6> [281.494474] [IGT] i915_pm_rpm: starting subtest module-reload <7> [281.494888] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [281.502955] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [281.504482] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [281.506107] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [281.507774] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [281.507816] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [281.509157] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [281.515554] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [281.515649] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [281.517254] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [281.523012] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [281.524995] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [281.526385] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [281.527963] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [281.529396] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [281.529436] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [281.530795] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [281.536134] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [281.536166] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [281.640194] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [281.641053] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [281.653782] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [281.680363] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [281.680862] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [281.693762] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [281.787015] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [281.788168] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [281.796251] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [281.796604] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [281.796887] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [281.797160] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [281.797425] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [281.798220] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [281.798510] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [281.799735] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [281.800024] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [281.801175] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [281.881412] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [281.882255] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [281.882634] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [281.883065] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [281.885210] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:112] is removed <7> [281.885351] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [281.886188] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [281.886899] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [281.887397] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [281.887913] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [281.888386] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [281.889221] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [281.909691] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [281.910363] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [281.911075] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [281.911736] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [281.912492] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [281.913305] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [281.914130] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [281.914930] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [281.915735] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [281.916314] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [281.917143] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [281.917882] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [281.918545] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [281.919540] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [281.920379] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [281.921031] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [281.921624] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [281.922124] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [281.922649] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [281.923194] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [281.923714] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [281.924202] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [281.924761] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [281.925262] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [281.925776] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [281.926282] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [281.926849] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [281.927348] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [281.927860] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [281.928413] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [281.929107] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [281.929789] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [281.930441] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [281.931124] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [281.931763] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [281.932242] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [281.932752] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [281.933407] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [281.934098] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [281.934774] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [281.935432] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset <7> [281.936129] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:59:pipe A] releasing DPLL 0 <7> [281.936880] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [281.937448] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [281.938143] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [281.938643] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [281.939104] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [281.939590] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [281.940148] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [modeset] <7> [281.940654] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no <7> [281.941211] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no <7> [281.941780] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no <7> [281.943145] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [282.145760] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 0 <7> [282.146461] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [282.161262] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power off <7> [282.161862] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power off time <7> [282.161855] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [282.162648] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - short <7> [282.163340] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [282.215089] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [282.216505] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long <7> [282.217663] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [282.221621] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [282.225923] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:110:DDI A/PHY A] <7> [282.227751] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:59:pipe A] <7> [282.227834] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A] <7> [282.231482] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [282.233171] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [282.238151] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A] <7> [282.239958] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B] <7> [282.242900] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A] <7> [282.244150] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B] <7> [282.245617] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C] <7> [282.247204] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C] <7> [282.248758] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A] <7> [282.250308] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B] <7> [282.251593] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C] <7> [282.252333] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1] <7> [282.254076] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A] <7> [282.287859] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [282.302016] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:111:eDP-1] removing connector from sysfs <7> [282.317954] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:119:DP-1] removing connector from sysfs <7> [282.321309] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:128:HDMI-A-1] removing connector from sysfs <7> [282.328983] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:134:DP-2] removing connector from sysfs <7> [282.335391] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:140:HDMI-A-2] removing connector from sysfs <7> [282.368983] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (355 ms remaining) <7> [282.730037] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [282.812162] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [283.369425] [IGT] Reloading i915 w/o display <5> [284.293865] Setting dangerous option force_probe - tainting kernel <6> [284.308631] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0 <7> [284.311536] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K <7> [284.311986] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [284.312293] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH <7> [284.312646] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [284.313171] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [284.313839] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [284.314243] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [284.315788] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [284.316194] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [284.316628] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [284.316996] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [284.317010] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [284.318000] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [284.318061] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047 <7> [284.318504] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [284.318903] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7715 MiB [mem 0x00000000-0x1e2383fff], io: n/a <7> [284.319253] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a <7> [284.320230] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018 <7> [284.320769] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [284.321189] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [284.321629] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [284.322045] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [284.330580] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [284.330908] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [284.331203] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [284.331533] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [284.331990] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [284.332462] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [284.332915] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no <7> [284.333365] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [284.333838] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [284.334289] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no <7> [284.334755] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes <7> [284.335203] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no <7> [284.335663] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3 <7> [284.336107] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [284.336570] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0 <7> [284.337018] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7> [284.338282] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [284.338779] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203 <7> [284.339247] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [284.339719] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [284.340173] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [284.340643] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [284.341104] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 850) <7> [284.341576] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [284.342031] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [284.342498] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [284.342953] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [284.343422] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136) <7> [284.343865] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [284.344308] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [284.344773] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [284.345231] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [284.345706] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [284.346172] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [284.346612] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [284.347037] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [284.347474] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [284.347902] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [284.348326] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [284.348764] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [284.349202] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [284.349677] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [284.350224] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [284.350714] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [284.351161] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [284.351613] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [284.352045] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [284.352486] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [284.353044] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [284.354182] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [284.354663] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [284.355118] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [284.355665] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [284.356115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [284.356581] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [284.357022] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [284.358348] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <7> [284.360656] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [284.361325] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [284.361364] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [284.362134] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [284.362618] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [284.362652] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [284.363068] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7> [284.363070] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [284.363597] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec) <7> [284.363977] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec) <6> [284.364352] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <7> [284.364304] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec) <7> [284.364756] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec) <7> [284.365165] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec) <7> [284.365583] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec) <7> [284.366006] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec) <7> [284.366425] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec) <7> [284.366755] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec) <7> [284.367050] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec) <7> [284.367431] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec) <7> [284.367840] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec) <7> [284.368246] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec) <7> [284.368682] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec) <7> [284.369102] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec) <7> [284.375116] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available. <7> [284.388542] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [284.389078] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:110:DDI A/PHY A] Using AUX CH A (VBT) <7> [284.389752] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:110:DDI A/PHY A] <7> [284.395452] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [284.395781] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [284.396087] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [284.396391] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [284.396756] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [284.397188] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [284.397678] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP <7> [284.398116] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [284.398612] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0 <7> [284.399059] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0 <7> [284.399656] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:110:DDI A/PHY A] initial power sequencer: PPS 0 <7> [284.401026] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [284.401488] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [284.401909] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [284.402328] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [284.402773] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [284.403238] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [284.403956] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turning VDD on <7> [284.405024] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [284.405516] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [284.415565] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [284.415915] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [284.416208] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [284.618593] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [284.619722] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [284.621751] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00 <7> [284.630907] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1 <7> [284.654092] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [284.654149] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor <7> [284.654185] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0 <7> [284.654896] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:111:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [284.658271] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:111:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [284.659866] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:111:eDP-1] DRRS type: static <7> [284.663283] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:111:eDP-1] Using native PCH PWM for backlight control <7> [284.665339] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:111:eDP-1] backlight initialized, disabled, brightness 0/937 <7> [284.667882] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [284.669318] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [284.670768] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [284.672371] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [284.673861] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [284.675634] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [284.679341] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:118:DDI B/PHY B] Using AUX CH B (VBT) <7> [284.681619] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:118:DDI B/PHY B] <7> [284.687921] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [284.689572] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:118:DDI B/PHY B] <7> [284.691066] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:118:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [284.695732] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:133:DDI C/PHY C] Using AUX CH C (VBT) <7> [284.697976] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:133:DDI C/PHY C] <7> [284.702756] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [284.704463] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:133:DDI C/PHY C] <7> [284.706131] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:133:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [284.709895] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled <6> [284.711440] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem <7> [284.712841] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:59:pipe A] hw state readout: disabled <7> [284.715294] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:84:pipe B] hw state readout: disabled <7> [284.717774] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:109:pipe C] hw state readout: disabled <7> [284.719526] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:35:plane 1A] hw state readout: disabled, pipe A <7> [284.721343] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:44:plane 2A] hw state readout: disabled, pipe A <7> [284.723213] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:53:cursor A] hw state readout: disabled, pipe A <7> [284.725552] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 1B] hw state readout: disabled, pipe B <7> [284.727577] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:69:plane 2B] hw state readout: disabled, pipe B <7> [284.729158] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:78:cursor B] hw state readout: disabled, pipe B <7> [284.730216] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:85:plane 1C] hw state readout: disabled, pipe C <7> [284.731220] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 2C] hw state readout: disabled, pipe C <7> [284.732271] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:103:cursor C] hw state readout: disabled, pipe C <7> [284.733266] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DDI A/PHY A] hw state readout: disabled, pipe A <7> [284.734287] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DDI B/PHY B] hw state readout: disabled, pipe A <7> [284.735249] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST A] hw state readout: disabled, pipe A <7> [284.736456] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST B] hw state readout: disabled, pipe B <7> [284.737480] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:122:DP-MST C] hw state readout: disabled, pipe C <7> [284.738307] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DDI C/PHY C] hw state readout: disabled, pipe A <7> [284.738977] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST A] hw state readout: disabled, pipe A <7> [284.739654] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:136:DP-MST B] hw state readout: disabled, pipe B <7> [284.740253] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:137:DP-MST C] hw state readout: disabled, pipe C <7> [284.740982] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [284.741726] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [284.742584] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [284.743340] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [284.744256] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:111:eDP-1] hw state readout: disabled <7> [284.745019] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:119:DP-1] hw state readout: disabled <7> [284.745906] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:128:HDMI-A-1] hw state readout: disabled <7> [284.746725] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:134:DP-2] hw state readout: disabled <7> [284.747399] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:140:HDMI-A-2] hw state readout: disabled <7> [284.747983] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:35:plane 1A] min_cdclk 0 kHz <7> [284.748549] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:44:plane 2A] min_cdclk 0 kHz <7> [284.749668] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:53:cursor A] min_cdclk 0 kHz <7> [284.750152] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:59:pipe A] min_cdclk 0 kHz <7> [284.750672] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 1B] min_cdclk 0 kHz <7> [284.751167] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:69:plane 2B] min_cdclk 0 kHz <7> [284.751670] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:78:cursor B] min_cdclk 0 kHz <7> [284.752262] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:84:pipe B] min_cdclk 0 kHz <7> [284.752853] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:85:plane 1C] min_cdclk 0 kHz <7> [284.753356] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 2C] min_cdclk 0 kHz <7> [284.753861] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:103:cursor C] min_cdclk 0 kHz <7> [284.754362] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:109:pipe C] min_cdclk 0 kHz <7> [284.754867] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:59:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [284.755357] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:84:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [284.755855] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:109:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [284.757165] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [setup_hw_state] <7> [284.757608] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:84:pipe B] enable: no [setup_hw_state] <7> [284.758001] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:109:pipe C] enable: no [setup_hw_state] <7> [284.758527] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [284.759181] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [284.759654] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [284.760135] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [284.760673] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7> [284.764048] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [284.764562] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [284.764989] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0 <7> [284.791046] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [284.791367] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [284.791747] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [284.792108] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [284.792481] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 0: start 0x8 <7> [284.792928] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 1: start 0x108 <7> [284.793386] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 2: start 0x208 <7> [284.793825] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 3: start 0x308 <7> [284.794272] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 4: start 0x3c8 <7> [284.794719] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 0: start 0x8 <7> [284.795143] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 1: start 0x108 <7> [284.795595] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 2: start 0x208 <7> [284.796027] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 3: start 0x308 <7> [284.796504] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 4: start 0x3c8 <7> [284.796939] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 0: start 0x8 <7> [284.797386] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 1: start 0x108 <7> [284.797819] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 2: start 0x208 <7> [284.798254] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 3: start 0x308 <7> [284.798695] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 4: start 0x3c8 <7> [284.799504] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [fastset] <7> [284.799949] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:84:pipe B] enable: no [fastset] <7> [284.800400] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:109:pipe C] enable: no [fastset] <7> [284.801142] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A] <7> [284.802120] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:84:pipe B] <7> [284.802823] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:109:pipe C] <7> [284.803516] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [284.810255] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:111:eDP-1] adding connector to sysfs <7> [284.811650] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:111:eDP-1] backlight device intel_backlight registered <7> [284.812023] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:111:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [284.812949] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [284.816470] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:111:eDP-1] generating connector hotplug event <7> [284.816585] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:119:DP-1] adding connector to sysfs <7> [284.817816] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [284.820472] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:119:DP-1] generating connector hotplug event <7> [284.820591] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:128:HDMI-A-1] adding connector to sysfs <7> [284.821451] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:128:HDMI-A-1] generating connector hotplug event <7> [284.821606] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:134:DP-2] adding connector to sysfs <7> [284.828664] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [284.834108] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:134:DP-2] generating connector hotplug event <7> [284.834282] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:140:HDMI-A-2] adding connector to sysfs <7> [284.836605] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:140:HDMI-A-2] generating connector hotplug event <6> [284.836748] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7> [284.843231] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [284.879391] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [284.895578] input: Video Bus as /devices/pci0000:00/acpi.video_bus.0/input/input35 <7> [284.898035] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [284.905327] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [284.905833] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:119:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [284.906268] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [284.906445] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:59:pipe A] not active, skipping <7> [284.906719] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:128:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [284.906867] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:84:pipe B] not active, skipping <7> [284.907280] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:109:pipe C] not active, skipping <7> [284.907716] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config <7> [284.908448] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [284.909520] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [284.911318] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [284.911815] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:134:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [284.912256] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [284.912677] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:140:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [284.914856] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] <7> [284.914872] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1] <7> [284.915204] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] status updated from unknown to disconnected <7> [284.915221] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] disconnected <7> [284.915230] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:111:eDP-1] EDID changed, epoch counter 2 <7> [284.915255] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] <7> [284.915263] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [284.915596] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [284.915753] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected <7> [284.915766] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] <7> [284.915778] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [284.916133] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected <7> [284.916143] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] <7> [284.916152] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [284.916502] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected <7> [284.916515] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] <7> [284.916525] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [284.916878] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected <7> [284.916887] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [284.916894] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] enabled? no <7> [284.916901] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:DP-1] enabled? no <7> [284.916906] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-1] enabled? no <7> [284.916912] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:134:DP-2] enabled? no <7> [284.916918] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:140:HDMI-A-2] enabled? no <7> [284.916955] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [284.916970] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [284.917056] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [284.917067] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [284.918267] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [284.923346] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9 <7> [284.923870] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [284.923976] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] <7> [284.923987] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1] <7> [284.924282] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] disconnected <7> [284.924293] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] <7> [284.924301] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [284.924633] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected <7> [284.924646] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] <7> [284.924655] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [284.925054] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected <7> [284.925067] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] <7> [284.925079] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [284.925505] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected <7> [284.925517] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] <7> [284.925529] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [284.925924] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected <7> [284.925936] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [284.925945] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] enabled? no <7> [284.925955] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:DP-1] enabled? no <7> [284.925964] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-1] enabled? no <7> [284.926914] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:134:DP-2] enabled? no <7> [284.926926] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:140:HDMI-A-2] enabled? no <7> [284.926984] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [284.927005] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [284.927111] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [284.927136] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [284.927250] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [284.927901] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [284.927829] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0 <7> [284.928236] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7> [284.928691] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] <7> [284.928656] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no <7> [284.928717] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1] <7> [284.929071] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] disconnected <7> [284.929090] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] <7> [284.929099] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [284.929079] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no <7> [284.929514] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7> [284.929826] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected <7> [284.929842] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] <7> [284.929854] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [284.929936] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7> [284.930277] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected <7> [284.930289] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] <7> [284.930301] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [284.930357] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no <7> [284.930738] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected <7> [284.930751] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] <7> [284.930762] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [284.930808] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7> [284.931162] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected <7> [284.931173] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [284.931193] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] enabled? no <7> [284.931202] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:DP-1] enabled? no <7> [284.931210] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-1] enabled? no <7> [284.931223] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:134:DP-2] enabled? no <7> [284.931232] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:140:HDMI-A-2] enabled? no <7> [284.931220] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7> [284.931663] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7> [284.932095] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7> [284.932546] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7> [284.932986] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [284.933027] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [284.933157] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [284.932974] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <6> [284.933187] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [284.933276] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [284.933442] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7> [284.933872] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes <7> [284.934305] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7> [284.934749] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7> [284.935175] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7> [284.935623] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7> [284.936058] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no <7> [284.936514] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz <7> [284.938100] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7> [284.939300] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [284.939756] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [284.940121] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [284.940491] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [284.940849] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [284.941432] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9 <7> [284.941769] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9 <7> [284.942099] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9 <7> [284.942460] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0 <7> [284.942776] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0 <7> [284.943098] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2 <7> [284.943464] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21 <7> [284.943802] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000 <7> [284.944143] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE <7> [284.944501] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7> [284.944841] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7> [284.945176] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39 <7> [284.945537] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7> [284.945881] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7> [284.946211] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7> [284.946567] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7> [284.946907] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7> [284.947245] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7> [284.947598] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7> [284.947928] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7> [284.948257] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7> [284.948698] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no <7> [284.949047] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no <7> [284.949404] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7> [284.949742] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7> [284.950078] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7> [284.950441] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no <7> [284.950782] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no <7> [284.951123] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7> [284.951482] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7> [284.951815] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes <7> [284.952152] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7> [284.952514] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no <7> [284.952853] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7> [284.953198] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7> [284.953562] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no <7> [284.953908] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no <7> [284.954252] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no <7> [284.954610] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7> [284.954952] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no <7> [284.955295] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7> [284.955657] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7> [284.956001] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7> [284.956342] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7> [284.956700] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no <7> [284.957042] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes <7> [284.957406] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7> [284.957749] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7> [284.958094] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7> [284.958457] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7> [284.958800] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7> [284.959142] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403 <7> [284.959502] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001 <7> [284.959838] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3 <7> [284.960177] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007 <7> [284.960544] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000 <7> [284.960885] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000 <7> [284.961222] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24 <7> [284.961584] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8 <7> [284.961923] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7> [284.962266] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7> [284.962630] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes <6> [284.962974] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [284.962978] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [284.962983] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [284.979734] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6> [284.980733] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7> [284.981429] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [284.982320] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [284.984394] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [285.018897] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [285.019201] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [285.019499] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [285.020894] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [285.021278] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [285.021665] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [285.021943] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [285.022256] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [285.022647] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <6> [285.068855] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input36 <6> [285.079447] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input37 <6> [285.085448] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input38 <7> [286.131391] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [287.220625] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turning VDD off <7> [287.220970] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [287.221270] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [287.221754] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [287.222037] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [287.222881] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [287.223287] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [287.223886] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long <7> [287.224146] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [287.224252] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [287.225397] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A] <7> [287.230350] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [287.300008] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [287.324405] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [287.332896] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [287.334121] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [287.334501] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [287.334491] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [287.334883] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [287.335370] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [287.335494] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [287.336732] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [287.337298] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [287.337481] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [287.350390] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [287.350730] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [287.351006] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [287.351310] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [287.352087] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [287.468887] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [287.469186] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [287.469857] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [287.470766] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [287.472854] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [287.481587] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [287.482679] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [287.484439] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [287.485323] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [287.486148] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [287.487039] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [287.487706] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [287.488358] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [287.488987] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [287.491557] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [287.492710] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [287.493300] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [287.494457] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [287.495342] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [287.563025] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [287.563372] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [287.564014] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [287.564600] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [287.565726] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [287.566149] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [287.566546] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [287.566931] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [287.567313] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [287.599568] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [287.618818] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:111:eDP-1] removing connector from sysfs <7> [287.628824] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:119:DP-1] removing connector from sysfs <7> [287.636628] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:128:HDMI-A-1] removing connector from sysfs <7> [287.648121] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:134:DP-2] removing connector from sysfs <7> [287.654566] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:140:HDMI-A-2] removing connector from sysfs <7> [287.682360] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (39 ms remaining) <7> [287.723477] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [287.733337] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [288.240112] [IGT] Reloading i915 as normal <5> [289.149915] Setting dangerous option force_probe - tainting kernel <6> [289.164702] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0 <7> [289.166937] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K <7> [289.167405] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [289.167697] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH <7> [289.167977] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [289.168369] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [289.168909] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [289.169213] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [289.170394] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [289.170662] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [289.170902] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [289.171174] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [289.171187] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [289.171898] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [289.171943] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047 <7> [289.172282] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [289.172560] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7715 MiB [mem 0x00000000-0x1e2383fff], io: n/a <7> [289.172791] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a <7> [289.173454] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018 <7> [289.173800] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [289.174076] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [289.174368] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [289.174658] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [289.183159] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [289.183470] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [289.183746] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [289.184019] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [289.184341] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [289.184765] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [289.185217] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no <7> [289.185660] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [289.186121] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [289.186544] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no <7> [289.186964] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes <7> [289.187392] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no <7> [289.187811] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3 <7> [289.188262] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [289.188693] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0 <7> [289.189137] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7> [289.190448] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [289.190781] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203 <7> [289.191200] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [289.191619] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [289.192035] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [289.192522] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [289.192906] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 850) <7> [289.193237] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [289.193592] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [289.194012] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [289.194446] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [289.194858] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136) <7> [289.195282] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [289.195656] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [289.195948] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [289.196280] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [289.196615] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [289.196914] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [289.197220] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [289.197544] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [289.197943] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [289.198400] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [289.198800] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [289.199225] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [289.199620] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [289.199938] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [289.200359] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [289.200814] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [289.201252] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [289.201659] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [289.202099] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [289.202471] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [289.202864] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [289.203284] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [289.203682] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [289.204734] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [289.205235] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [289.205549] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [289.205922] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [289.206358] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [289.207634] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <7> [289.209823] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [289.211172] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [289.212005] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [289.212536] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [289.213604] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [289.213654] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7> [289.213997] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec) <7> [289.214020] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [289.214314] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec) <7> [289.214486] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [289.214718] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec) <6> [289.215333] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <7> [289.215148] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec) <7> [289.215568] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec) <7> [289.215990] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec) <7> [289.216433] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec) <7> [289.216857] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec) <7> [289.217287] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec) <7> [289.217707] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec) <7> [289.218137] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec) <7> [289.218561] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec) <7> [289.218985] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec) <7> [289.219418] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec) <7> [289.219837] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec) <7> [289.225952] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available. <7> [289.230571] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [289.230944] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:110:DDI A/PHY A] Using AUX CH A (VBT) <7> [289.231398] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:110:DDI A/PHY A] <7> [289.238100] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [289.238564] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [289.238973] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [289.239407] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [289.239835] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [289.240288] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [289.240695] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP <7> [289.241114] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [289.241512] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0 <7> [289.241917] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0 <7> [289.242481] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:110:DDI A/PHY A] initial power sequencer: PPS 0 <7> [289.242944] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [289.243368] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [289.243772] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [289.244187] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [289.244574] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [289.245023] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [289.246414] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turning VDD on <7> [289.246863] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [289.247362] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [289.257254] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [289.257600] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [289.257879] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [289.466030] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [289.466954] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [289.470023] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00 <7> [289.477219] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1 <7> [289.496691] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [289.496731] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor <7> [289.496755] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0 <7> [289.497206] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:111:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [289.500503] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:111:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [289.502307] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:111:eDP-1] DRRS type: static <7> [289.504554] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:111:eDP-1] Using native PCH PWM for backlight control <7> [289.506439] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:111:eDP-1] backlight initialized, disabled, brightness 0/937 <7> [289.509117] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [289.510854] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [289.512629] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [289.514368] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [289.516163] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [289.517965] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [289.521555] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:118:DDI B/PHY B] Using AUX CH B (VBT) <7> [289.523537] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:118:DDI B/PHY B] <7> [289.529116] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [289.531183] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:118:DDI B/PHY B] <7> [289.532950] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:118:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [289.536926] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:133:DDI C/PHY C] Using AUX CH C (VBT) <7> [289.538911] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:133:DDI C/PHY C] <7> [289.543342] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [289.545308] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:133:DDI C/PHY C] <7> [289.547053] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:133:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [289.553280] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled <6> [289.555176] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem <7> [289.556431] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:59:pipe A] hw state readout: disabled <7> [289.559191] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:84:pipe B] hw state readout: disabled <7> [289.561898] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:109:pipe C] hw state readout: disabled <7> [289.563788] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:35:plane 1A] hw state readout: disabled, pipe A <7> [289.565751] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:44:plane 2A] hw state readout: disabled, pipe A <7> [289.567685] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:53:cursor A] hw state readout: disabled, pipe A <7> [289.569462] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 1B] hw state readout: disabled, pipe B <7> [289.570621] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:69:plane 2B] hw state readout: disabled, pipe B <7> [289.571598] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:78:cursor B] hw state readout: disabled, pipe B <7> [289.572582] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:85:plane 1C] hw state readout: disabled, pipe C <7> [289.573512] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 2C] hw state readout: disabled, pipe C <7> [289.574514] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:103:cursor C] hw state readout: disabled, pipe C <7> [289.575474] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DDI A/PHY A] hw state readout: disabled, pipe A <7> [289.576480] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DDI B/PHY B] hw state readout: disabled, pipe A <7> [289.577548] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST A] hw state readout: disabled, pipe A <7> [289.578466] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST B] hw state readout: disabled, pipe B <7> [289.579039] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:122:DP-MST C] hw state readout: disabled, pipe C <7> [289.579736] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DDI C/PHY C] hw state readout: disabled, pipe A <7> [289.580411] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST A] hw state readout: disabled, pipe A <7> [289.580981] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:136:DP-MST B] hw state readout: disabled, pipe B <7> [289.581576] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:137:DP-MST C] hw state readout: disabled, pipe C <7> [289.582360] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [289.583985] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [289.584723] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [289.585463] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [289.586320] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:111:eDP-1] hw state readout: disabled <7> [289.587023] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:119:DP-1] hw state readout: disabled <7> [289.587778] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:128:HDMI-A-1] hw state readout: disabled <7> [289.588370] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:134:DP-2] hw state readout: disabled <7> [289.588902] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:140:HDMI-A-2] hw state readout: disabled <7> [289.589401] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:35:plane 1A] min_cdclk 0 kHz <7> [289.589913] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:44:plane 2A] min_cdclk 0 kHz <7> [289.590404] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:53:cursor A] min_cdclk 0 kHz <7> [289.590916] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:59:pipe A] min_cdclk 0 kHz <7> [289.591475] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 1B] min_cdclk 0 kHz <7> [289.592007] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:69:plane 2B] min_cdclk 0 kHz <7> [289.592517] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:78:cursor B] min_cdclk 0 kHz <7> [289.593044] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:84:pipe B] min_cdclk 0 kHz <7> [289.593528] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:85:plane 1C] min_cdclk 0 kHz <7> [289.594037] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 2C] min_cdclk 0 kHz <7> [289.594537] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:103:cursor C] min_cdclk 0 kHz <7> [289.595041] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:109:pipe C] min_cdclk 0 kHz <7> [289.595575] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:59:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [289.596126] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:84:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [289.596483] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:109:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [289.597406] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [setup_hw_state] <7> [289.597924] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:84:pipe B] enable: no [setup_hw_state] <7> [289.598460] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:109:pipe C] enable: no [setup_hw_state] <7> [289.598979] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [289.599459] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [289.599801] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [289.600252] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [289.600759] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7> [289.604445] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [289.604838] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [289.605243] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0 <7> [289.630706] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [289.630988] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [289.631258] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [289.631521] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [289.631761] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 0: start 0x8 <7> [289.632049] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 1: start 0x108 <7> [289.632383] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 2: start 0x208 <7> [289.632692] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 3: start 0x308 <7> [289.632987] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 4: start 0x3c8 <7> [289.633334] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 0: start 0x8 <7> [289.633840] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 1: start 0x108 <7> [289.634317] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 2: start 0x208 <7> [289.634691] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 3: start 0x308 <7> [289.634986] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 4: start 0x3c8 <7> [289.635392] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 0: start 0x8 <7> [289.635696] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 1: start 0x108 <7> [289.635992] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 2: start 0x208 <7> [289.636345] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 3: start 0x308 <7> [289.636665] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 4: start 0x3c8 <7> [289.637249] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [fastset] <7> [289.637555] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:84:pipe B] enable: no [fastset] <7> [289.637850] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:109:pipe C] enable: no [fastset] <7> [289.638440] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A] <7> [289.639134] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:84:pipe B] <7> [289.639696] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:109:pipe C] <7> [289.640299] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [289.647993] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:111:eDP-1] adding connector to sysfs <7> [289.650211] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:111:eDP-1] backlight device intel_backlight registered <7> [289.650643] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:111:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [289.651606] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [289.656327] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:111:eDP-1] generating connector hotplug event <7> [289.656469] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:119:DP-1] adding connector to sysfs <7> [289.657914] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [289.661795] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:119:DP-1] generating connector hotplug event <7> [289.661960] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:128:HDMI-A-1] adding connector to sysfs <7> [289.663817] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:128:HDMI-A-1] generating connector hotplug event <7> [289.663959] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:134:DP-2] adding connector to sysfs <7> [289.665349] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [289.668406] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:134:DP-2] generating connector hotplug event <7> [289.668575] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:140:HDMI-A-2] adding connector to sysfs <7> [289.669904] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:140:HDMI-A-2] generating connector hotplug event <6> [289.670041] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7> [289.676354] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [289.711559] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [289.723476] input: Video Bus as /devices/pci0000:00/acpi.video_bus.0/input/input39 <7> [289.724747] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [289.731854] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [289.734708] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:59:pipe A] not active, skipping <7> [289.735206] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:84:pipe B] not active, skipping <7> [289.735622] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:109:pipe C] not active, skipping <7> [289.735981] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config <7> [289.736828] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [289.737392] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:119:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [289.737862] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [289.738970] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [289.739454] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [289.740090] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [289.740567] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [289.740580] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [289.740988] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [289.742754] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [289.746411] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [289.746427] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [289.746955] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:128:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [289.747414] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [289.751955] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:134:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [289.752471] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [289.753177] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [289.753602] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [289.756122] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [289.757479] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [289.757492] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [289.757937] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [289.761388] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [289.761403] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [289.761898] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:140:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [289.764101] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] <7> [289.764348] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [289.764120] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1] <7> [289.764924] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [289.767091] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [289.767559] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [289.768032] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [289.768076] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor <7> [289.768086] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0 <7> [289.768130] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no <7> [289.768556] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [289.768985] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [289.770444] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] status updated from unknown to connected <7> [289.770741] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes: <7> [289.770753] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [289.770766] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [289.770781] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] <7> [289.770793] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [289.771461] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [289.775384] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected <7> [289.775405] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] <7> [289.775418] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [289.776537] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [289.776986] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [289.777670] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [289.778236] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [289.778249] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [289.778673] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [289.782854] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [289.782871] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [289.784246] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected <7> [289.784265] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] <7> [289.784278] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [289.788909] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected <7> [289.788931] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] <7> [289.788944] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [289.789743] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [289.790199] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [289.790808] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [289.791442] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [289.791455] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [289.791885] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [289.795344] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [289.795358] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [289.795831] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected <7> [289.795846] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] enabled? yes <7> [289.795857] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:DP-1] enabled? no <7> [289.795866] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-1] enabled? no <7> [289.795875] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:134:DP-2] enabled? no <7> [289.795883] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:140:HDMI-A-2] enabled? no <7> [289.795940] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [289.795976] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] found preferred mode: 3200x1800 <7> [289.795986] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [289.796020] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:59:pipe A] desired mode 3200x1800 set (0,0) <7> [289.796186] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [289.796244] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] no BIOS fb, allocating a new one <7> [289.803966] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 3200x1800 fb <6> [289.806314] fbcon: i915drmfb (fb0) is primary device <6> [289.807453] Console: switching to colour frame buffer device 200x56 <6> [289.807471] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7> [289.807487] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9 <7> [289.807954] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0 <7> [289.808424] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7> [289.810037] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [289.810078] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [289.810763] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] <7> [289.810788] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1] <7> [289.812395] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [289.812867] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [289.813332] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [289.814685] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no <7> [289.815163] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no <7> [289.815593] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7> [289.816089] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7> [289.817240] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [289.817257] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor <7> [289.817275] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0 <7> [289.817353] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no <7> [289.817783] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [289.818229] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [289.820037] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no <7> [289.821692] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes: <7> [289.821719] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [289.821733] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [289.821747] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] <7> [289.821759] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [289.822802] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7> [289.823280] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7> [289.823715] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7> [289.824654] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7> [289.825139] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7> [289.825577] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7> [289.825977] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7> [289.826525] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected <7> [289.826547] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] <7> [289.826560] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [289.827629] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [289.829212] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [289.829873] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [289.831017] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [289.831031] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [289.831564] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [289.832128] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes <7> [289.834174] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7> [289.834646] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7> [289.836673] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [289.836692] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [289.837266] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7> [289.837720] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7> [289.838209] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no <7> [289.838786] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected <7> [289.838805] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] <7> [289.838818] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [289.839460] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz <7> [289.841233] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7> [289.841678] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [289.843363] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [289.843862] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [289.844952] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [289.845517] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [289.846443] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9 <7> [289.846793] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9 <7> [289.847865] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected <7> [289.847887] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] <7> [289.847900] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [289.848644] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [289.849076] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [289.849688] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [289.850271] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [289.850284] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [289.850709] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [289.854282] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [289.854298] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [289.854769] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected <7> [289.854784] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] enabled? yes <7> [289.854795] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:DP-1] enabled? no <7> [289.854804] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-1] enabled? no <7> [289.854813] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:134:DP-2] enabled? no <7> [289.854822] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:140:HDMI-A-2] enabled? no <7> [289.855741] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9 <7> [289.856820] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [289.856875] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] found preferred mode: 3200x1800 <7> [289.856887] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config <7> [289.856975] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:59:pipe A] desired mode 3200x1800 set (0,0) <7> [289.857899] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0 <7> [289.859842] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0 <7> [289.861637] i915 0000:00:02.0: [drm:compute_baseline_pipe_bpp [i915]] [CONNECTOR:111:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [289.862012] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:110:DDI A/PHY A][CRTC:59:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [289.862118] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2 <7> [289.862470] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21 <7> [289.862782] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000 <7> [289.862983] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000 <7> [289.863141] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE <7> [289.863490] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7> [289.863548] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [289.863839] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7> [289.864010] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:110:DDI A/PHY A] [CRTC:59:pipe A] <7> [289.864204] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39 <7> [289.864553] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7> [289.864537] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [289.864901] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7> [289.864993] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [289.865268] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7> [289.865541] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [289.865617] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7> [289.865962] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7> [289.865999] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [289.866875] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [289.867413] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [289.868500] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7> [289.868689] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [289.868857] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7> [289.869217] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7> [289.869306] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [289.869565] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7> [289.869764] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [289.869913] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no <7> [289.870273] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no <7> [289.870522] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [289.870962] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [289.871268] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7> [289.871612] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7> [289.871641] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [289.871961] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7> [289.872225] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [289.872445] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no <7> [289.872673] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [289.872800] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no <7> [289.873198] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7> [289.873324] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [289.873544] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7> [289.873783] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [289.873893] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes <7> [289.874422] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [289.874846] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [289.875465] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [289.875890] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [289.876381] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7> [289.876491] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [289.876731] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no <7> [289.876946] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [289.877099] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7> [289.877447] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7> [289.877633] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [289.877789] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no <7> [289.878147] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no <7> [289.878282] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [289.878728] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [289.879177] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no <7> [289.879350] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [289.879525] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7> [289.879810] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [289.879874] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no <7> [289.880376] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7> [289.880393] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [289.880730] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7> [289.880851] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [289.881105] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7> [289.881450] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7> [289.881563] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [289.881797] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no <7> [289.882021] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [289.882636] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [289.883222] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [289.883646] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [289.884282] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [289.884721] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dpll_hw_state <7> [289.885242] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes <7> [289.885355] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [289.885591] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7> [289.885811] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0 <7> [289.885940] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7> [289.886426] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7> [289.886728] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7> [289.887232] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7> [289.887395] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [289.887576] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403 <7> [289.887850] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [289.887927] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001 <7> [289.888948] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [289.889595] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [289.890154] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [289.890426] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3 <7> [289.890598] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [289.890777] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007 <7> [289.891195] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000 <7> [289.891524] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000 <7> [289.891865] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24 <7> [289.891909] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset <7> [289.892515] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [289.892863] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8 <7> [289.892945] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [289.893399] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [289.893475] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7> [289.893825] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7> [289.893846] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [289.894254] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes <7> [289.894329] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <6> [289.894604] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [289.894607] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [289.894611] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [289.897067] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [289.897467] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [289.897839] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [289.898389] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [289.898826] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [289.899237] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [289.899614] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [289.899990] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [289.900392] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:59:pipe A] allocated DPLL 0 <7> [289.900776] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:59:pipe A] reserving DPLL 0 <7> [289.901192] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: yes [modeset] <7> [289.901569] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [289.901889] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [289.902230] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [289.902564] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [289.902935] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [289.903324] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [289.903700] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [289.904107] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [289.904470] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [289.904824] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [289.905274] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [289.905634] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [289.905992] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [289.906374] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [289.906710] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [289.907015] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [289.907816] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [289.908209] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [289.908571] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [289.908877] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [289.909216] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [289.909580] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [289.911028] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [289.911439] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [289.911770] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [289.912091] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [289.912435] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [289.912736] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [289.913062] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [289.913374] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [289.913679] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [289.913976] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [289.914303] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [289.914662] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [289.915022] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [289.916060] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [289.916399] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [289.916719] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [289.917066] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [289.917370] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [289.917665] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [289.917966] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [289.919825] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [289.920246] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:112] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [289.920612] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [289.920973] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [289.921361] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no <7> [289.921725] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no <7> [289.922826] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [289.924481] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A] <7> [289.924859] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B] <7> [289.925251] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A] <7> [289.925617] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B] <7> [289.925988] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C] <7> [289.926448] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C] <7> [289.926822] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A] <7> [289.927206] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B] <7> [289.927586] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C] <7> [289.929354] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:59:pipe A] <7> [289.929775] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <6> [289.930758] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7> [289.931077] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power on <7> [289.931570] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [289.931975] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [289.942751] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [289.943075] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power on <7> [289.943479] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000000b <7> [290.143691] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [290.145319] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [290.149641] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [290.157317] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [290.158231] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [290.161510] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [290.162890] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [290.164260] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [290.170255] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Clock recovery OK <7> [290.172089] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [290.173875] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [290.183805] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [290.185166] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [290.187143] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [290.195185] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [290.196291] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [290.197398] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [290.201802] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [290.203378] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [290.206104] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [290.209612] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [290.211190] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [290.214810] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 37 <7> [290.219796] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 383 us, max time under evasion is 250 us <7> [290.226509] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [290.239308] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1] <7> [290.241506] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A] <7> [290.244938] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <6> [290.259821] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7> [290.261183] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [290.267413] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [290.267449] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [290.267744] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] <7> [290.267782] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1] <7> [290.271276] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [290.272466] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [290.273471] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [290.276082] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [290.276908] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [290.276934] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor <7> [290.276952] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0 <7> [290.277068] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no <7> [290.277750] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [290.278854] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [290.281558] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes: <7> [290.281584] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [290.281609] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [290.281634] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] <7> [290.281657] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [290.282236] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [290.292206] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [290.295119] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected <7> [290.295144] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] <7> [290.295159] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [290.296882] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [290.298102] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [290.298746] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [290.299318] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [290.299335] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [290.299831] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [290.307507] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [290.307525] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [290.308039] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected <7> [290.308057] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] <7> [290.308071] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [290.312585] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected <7> [290.312602] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] <7> [290.312614] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [290.314939] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [290.315346] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [290.316052] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [290.316468] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [290.316487] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [290.316838] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [290.321187] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [290.321201] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [290.321605] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected <7> [290.321619] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] enabled? yes <7> [290.321628] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:DP-1] enabled? no <7> [290.321635] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-1] enabled? no <7> [290.321642] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:134:DP-2] enabled? no <7> [290.321649] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:140:HDMI-A-2] enabled? no <7> [290.321701] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [290.321733] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] found preferred mode: 3200x1800 <7> [290.321742] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config <7> [290.323114] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:59:pipe A] desired mode 3200x1800 set (0,0) <7> [290.323810] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [290.323809] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] <7> [290.323834] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1] <7> [290.324497] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [290.324874] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [290.325268] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [290.328710] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [290.328725] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor <7> [290.328735] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0 <7> [290.328782] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no <7> [290.329740] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [290.330848] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [290.333575] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes: <7> [290.333590] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [290.333602] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [290.333809] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] <7> [290.333827] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [290.338593] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected <7> [290.338747] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] <7> [290.338759] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [290.340860] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [290.341666] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [290.342594] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [290.343802] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [290.343815] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [290.344195] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [290.347547] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [290.347560] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [290.347987] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected <7> [290.348497] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] <7> [290.348520] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [290.353070] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected <7> [290.353258] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] <7> [290.353270] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [290.353962] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [290.354417] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [290.354847] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [290.354950] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [290.355290] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [290.355535] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [290.355545] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [290.355691] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [290.355897] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [290.359265] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [290.359281] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [290.359707] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected <7> [290.359648] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [290.360073] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [290.360472] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [290.360860] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [290.361413] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [290.361809] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [290.367655] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] <7> [290.367674] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [290.372908] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected <7> [290.374146] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] <7> [290.374162] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [290.374806] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [290.375307] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [290.375852] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [290.376347] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [290.376359] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [290.376735] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [290.380139] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [290.380152] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [290.381329] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected <7> [290.382356] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] <7> [290.382370] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [290.386878] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected <7> [290.388353] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] <7> [290.389082] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [290.390420] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [290.392048] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [290.392614] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [290.393119] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [290.393132] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [290.393520] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [290.397434] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [290.397449] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [290.397913] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected <7> [290.398712] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] <7> [290.398726] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1] <7> [290.399300] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [290.399697] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [290.400112] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [290.400568] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [290.400581] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor <7> [290.400590] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0 <7> [290.400656] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no <7> [290.401062] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [290.401466] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [290.403262] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes: <7> [290.403277] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [290.403289] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [290.403338] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] <7> [290.403350] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [290.408241] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected <7> [290.408298] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] <7> [290.408310] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [290.409043] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [290.409437] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [290.410037] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [290.411426] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [290.411439] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [290.411842] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [290.417536] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [290.417552] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [290.418266] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected <7> [290.418321] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] <7> [290.418333] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [290.422899] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected <7> [290.422958] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] <7> [290.422970] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [290.423708] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [290.424109] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [290.424678] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <6> [290.426353] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input40 <7> [290.426475] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [290.426491] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [290.426906] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [290.431012] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [290.431028] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [290.431482] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected <7> [290.432471] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:144] <6> [290.439423] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input41 <6> [290.443473] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input42 <7> [291.477135] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:59:pipe A] <7> [291.477658] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [291.479015] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [291.479511] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [291.479917] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [291.480355] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [291.480765] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [291.481184] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [291.481589] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [291.482037] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [291.482446] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [291.482853] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [291.483277] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [291.483686] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [291.484104] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [291.484512] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [291.484914] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [291.485338] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [291.485742] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [291.486166] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [291.486575] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [291.486996] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [291.487409] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [291.487818] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [291.488237] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [291.488655] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [291.489093] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [291.489495] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [291.489898] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [291.490325] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [291.490732] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [291.491154] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [291.491566] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [291.491989] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [291.492396] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [291.492805] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [291.493242] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [291.493656] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [291.494073] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [291.494479] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [291.494896] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset <7> [291.495317] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:59:pipe A] releasing DPLL 0 <7> [291.495791] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [291.496265] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [291.496661] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [291.497075] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [291.497474] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [291.497871] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [291.498292] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [291.498695] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [291.499219] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [291.499676] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz <7> [291.500167] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [291.500568] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [291.500978] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [291.501374] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [modeset] <7> [291.501765] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no <7> [291.502172] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no <7> [291.502563] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no <7> [291.503206] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [291.505515] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [291.554319] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [291.713374] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 0 <7> [291.716733] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [291.729221] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power off <7> [291.729743] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [291.730407] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power off time <7> [291.731110] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - short <7> [291.732479] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [291.783056] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [291.783101] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [291.784036] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long <7> [291.784457] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [291.784903] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [291.791316] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:110:DDI A/PHY A] <7> [291.791669] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:59:pipe A] <7> [291.792569] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A] <7> [291.793435] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [291.794686] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [291.797344] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A] <7> [291.798530] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B] <7> [291.799654] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A] <7> [291.801069] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B] <7> [291.802209] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C] <7> [291.803393] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C] <7> [291.804757] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A] <7> [291.806286] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B] <7> [291.807654] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C] <7> [291.808985] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1] <7> [291.811458] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A] <7> [291.815254] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:84:pipe B] <7> [291.816788] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:109:pipe C] <7> [291.913633] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [291.915348] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [291.917145] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [291.919152] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [291.923398] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [291.944457] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [292.039847] i915 0000:00:02.0: [drm:compute_baseline_pipe_bpp [i915]] [CONNECTOR:111:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [292.041159] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:110:DDI A/PHY A][CRTC:59:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [292.042402] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000 <7> [292.043753] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [292.045729] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:110:DDI A/PHY A] [CRTC:59:pipe A] <7> [292.047117] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [292.048414] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [292.049715] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [292.051142] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [292.052699] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [292.054289] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [292.055463] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [292.056616] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [292.057634] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [292.058784] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [292.059958] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [292.061317] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [292.062814] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [292.064384] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [292.065877] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [292.067289] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [292.068698] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [292.070096] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [292.071127] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [292.072498] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [292.073883] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [292.075253] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [292.076666] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [292.078078] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [292.079332] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [292.080533] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [292.081706] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [292.082741] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [292.083775] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [292.084816] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [292.085808] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [292.086854] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [292.087943] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [292.089001] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [292.090010] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [292.091116] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [292.092127] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [292.093175] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [292.094165] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [292.095246] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset <7> [292.096471] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [292.097504] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [292.098497] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [292.099511] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [292.100464] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [292.101512] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [292.102583] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [292.103767] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [292.105111] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [292.106202] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [292.107221] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [292.108275] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [292.109282] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [292.110318] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:59:pipe A] allocated DPLL 0 <7> [292.111355] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:59:pipe A] reserving DPLL 0 <7> [292.112430] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: yes [modeset] <7> [292.113474] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [292.114954] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [292.116426] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [292.117851] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [292.119469] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [292.120935] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [292.122379] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [292.123800] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [292.125225] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [292.126645] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [292.128067] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [292.129494] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [292.130938] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [292.132351] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [292.133762] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [292.135177] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [292.136528] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [292.137961] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [292.139391] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [292.140811] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [292.142250] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [292.143680] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [292.145121] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [292.146556] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [292.147699] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [292.148654] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [292.149618] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [292.150579] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [292.151545] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [292.152499] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [292.153493] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [292.154460] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [292.155421] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [292.156310] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [292.157017] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [292.157699] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [292.158410] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [292.159123] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [292.159809] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [292.160525] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [292.161231] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [292.161939] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [292.162626] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [292.163342] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:112] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [292.164056] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [292.164745] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [292.165398] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no <7> [292.165968] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no <7> [292.177973] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [292.187819] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [292.188269] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [292.188557] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [292.190578] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [292.191389] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [292.193037] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A] <7> [292.193408] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B] <7> [292.193757] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A] <7> [292.194131] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B] <7> [292.194431] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C] <7> [292.194678] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C] <7> [292.194950] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A] <7> [292.195292] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B] <7> [292.195633] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C] <7> [292.196260] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:59:pipe A] <7> [292.196629] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [292.197169] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power on <7> [292.197533] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (87 ms remaining) <7> [292.289322] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [292.338996] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [292.341813] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power on <7> [292.343262] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003 <7> [292.392080] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [292.393281] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long <7> [292.394406] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [292.395623] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A] <7> [292.545268] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [292.546541] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [292.548093] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [292.550723] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turning VDD on <7> [292.552039] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b <7> [292.560472] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [292.561797] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [292.564792] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [292.566267] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [292.567437] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [292.570648] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Clock recovery OK <7> [292.571783] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [292.572851] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [292.576221] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [292.577623] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [292.578825] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [292.583721] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [292.584832] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [292.587008] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [292.590156] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [292.591224] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [292.594305] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 37 <7> [292.598077] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 389 us, max time under evasion is 250 us <7> [292.606114] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [292.615330] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1] <7> [292.616956] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A] <7> [292.623014] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [292.623663] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [292.628576] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [292.630267] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [292.631419] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [292.632949] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [292.634197] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [292.634238] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [292.635556] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [292.640503] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [292.640537] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [292.644354] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [292.651068] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [292.652994] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [292.654327] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [292.655808] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [292.657142] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [292.657181] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [292.658548] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [292.665843] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [292.665919] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [292.775442] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [292.776330] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [292.789041] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [292.815561] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [292.815990] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [292.829160] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [292.929833] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [292.932588] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [292.940795] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [292.941517] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [292.942149] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [292.943467] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [292.944543] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [292.946345] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [292.947275] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [292.950259] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [292.951151] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [292.953388] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [293.043976] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [293.045860] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [293.046432] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [293.046946] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <6> [293.052123] Console: switching to colour dummy device 80x25 <7> [293.052445] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:112] is removed <7> [293.052639] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [293.053777] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [293.054663] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [293.055394] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [293.056252] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [293.057101] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [293.058754] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [293.073000] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [293.073759] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [293.074928] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [293.077512] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [293.078338] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [293.079139] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [293.079814] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [293.080594] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [293.081748] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [293.082580] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [293.083418] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [293.084269] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [293.085175] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [293.086061] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [293.087071] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [293.087683] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [293.088309] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [293.089187] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [293.090040] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [293.090904] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [293.091713] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [293.092575] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [293.093313] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [293.093947] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [293.094660] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [293.095517] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [293.096352] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [293.097193] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [293.098047] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [293.098770] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [293.099413] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [293.100226] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [293.101067] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [293.101901] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [293.102711] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [293.103570] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [293.104269] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [293.104911] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [293.105724] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [293.106579] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [293.107423] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset <7> [293.108272] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:59:pipe A] releasing DPLL 0 <7> [293.109211] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [293.109930] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [293.110706] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [293.111587] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [293.112419] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [293.113252] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [293.114092] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [modeset] <7> [293.114790] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no <7> [293.115444] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no <7> [293.116273] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no <7> [293.118168] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [293.321302] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 0 <7> [293.325302] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [293.344045] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power off <7> [293.344442] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [293.345811] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - short <7> [293.346734] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power off time <7> [293.348090] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [293.399232] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [293.400618] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long <7> [293.400660] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [293.401931] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [293.403494] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:110:DDI A/PHY A] <7> [293.405318] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A] <7> [293.407881] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:59:pipe A] <7> [293.411900] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [293.414960] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [293.420691] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A] <7> [293.422237] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B] <7> [293.423973] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A] <7> [293.426111] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B] <7> [293.427942] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C] <7> [293.429807] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C] <7> [293.431571] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A] <7> [293.433252] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B] <7> [293.434601] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C] <7> [293.436209] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1] <7> [293.439218] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A] <7> [293.521372] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [293.568109] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:111:eDP-1] removing connector from sysfs <7> [293.594218] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:119:DP-1] removing connector from sysfs <7> [293.607990] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:128:HDMI-A-1] removing connector from sysfs <7> [293.637571] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:134:DP-2] removing connector from sysfs <7> [293.648578] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:140:HDMI-A-2] removing connector from sysfs <7> [293.674068] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (228 ms remaining) <7> [293.905420] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [293.945061] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [294.637759] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS <6> [294.638943] [IGT] i915_pm_rpm: exiting, ret=0

<6> [279.179252] Console: switching to colour dummy device 80x25

<7> [279.184351] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [279.185182] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1]

<7> [279.185195] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1]

<7> [279.185897] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [279.186224] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [279.186497] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [279.186818] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [279.186830] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor

<7> [279.186838] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0

<7> [279.186876] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no

<7> [279.187245] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [279.187530] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [279.188791] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes:

<7> [279.188801] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [279.188809] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [279.188926] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1]

<7> [279.188934] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [279.193393] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected

<7> [279.193507] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1]

<7> [279.193516] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [279.194464] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [279.194876] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [279.195420] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [279.196392] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [279.196403] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [279.196735] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [279.200094] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [279.200105] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [279.200424] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected

<7> [279.200511] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2]

<7> [279.200519] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [279.204911] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected

<7> [279.204992] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2]

<7> [279.205000] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [279.205519] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [279.205797] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [279.206254] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [279.206527] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [279.206535] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [279.206808] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [279.209869] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [279.209878] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [279.210162] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected

<7> [279.218635] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1]

<7> [279.218652] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [279.223230] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected

<7> [279.224167] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1]

<7> [279.224181] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [279.224851] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [279.225213] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [279.225745] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [279.226173] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [279.226184] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [279.226542] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [279.229814] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [279.229825] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [279.230234] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected

<7> [279.231194] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2]

<7> [279.231207] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [279.235688] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected

<7> [279.236577] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2]

<7> [279.236596] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [279.237251] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [279.237602] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [279.238166] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [279.238573] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [279.238583] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [279.238960] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [279.242171] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [279.242182] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [279.242593] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected

<7> [279.243353] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1]

<7> [279.243365] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1]

<7> [279.243824] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [279.244201] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [279.244556] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [279.244996] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [279.245008] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor

<7> [279.245016] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0

<7> [279.245054] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no

<7> [279.245424] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [279.245797] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [279.246821] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes:

<7> [279.246833] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [279.246845] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [279.246891] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1]

<7> [279.246902] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [279.251415] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected

<7> [279.251459] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1]

<7> [279.251470] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [279.252158] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [279.252517] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [279.253118] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [279.253502] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [279.253512] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [279.253877] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [279.257114] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [279.257125] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [279.257546] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected

<7> [279.257588] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2]

<7> [279.257598] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [279.262083] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected

<7> [279.262124] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2]

<7> [279.262134] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [279.262787] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [279.263148] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [279.263692] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [279.264106] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [279.264116] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [279.264463] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [279.267668] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [279.267678] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [279.268122] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected

<7> [279.268860] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:145]

<7> [279.427159] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [280.315660] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:59:pipe A]

<7> [280.316163] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [280.317225] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [280.318021] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [280.318299] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [280.318575] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [280.318898] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [280.319190] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [280.319465] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [280.319761] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [280.320056] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [280.320330] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [280.320604] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [280.320932] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [280.321220] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [280.321494] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [280.321795] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [280.322089] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [280.322364] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [280.322639] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [280.322931] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [280.323233] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [280.323515] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [280.323828] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [280.324127] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [280.324399] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [280.324771] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [280.325111] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [280.325388] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [280.325750] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [280.326100] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [280.326378] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [280.326708] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [280.327101] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [280.327482] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [280.327878] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [280.328263] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [280.328655] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [280.329080] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [280.329466] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [280.329852] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset

<7> [280.330174] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:59:pipe A] releasing DPLL 0

<7> [280.330493] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [280.330810] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [280.331124] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [280.331416] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [280.331710] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [280.332039] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [280.332304] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [280.332569] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [280.332965] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [280.333322] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz

<7> [280.333638] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [280.333936] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [280.334319] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [280.334670] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [modeset]

<7> [280.334993] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no

<7> [280.335393] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no

<7> [280.335801] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no

<7> [280.336432] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [280.338206] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [280.546088] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 0

<7> [280.549028] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [280.564096] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power off

<7> [280.566215] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [280.567206] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - short

<7> [280.571628] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [280.573580] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [280.622508] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [280.623917] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [280.625225] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long

<7> [280.626515] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [280.629117] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [280.631953] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:110:DDI A/PHY A]

<7> [280.631970] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:59:pipe A]

<7> [280.633389] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A]

<7> [280.636152] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [280.637713] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [280.640990] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A]

<7> [280.642453] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B]

<7> [280.643848] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A]

<7> [280.645209] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B]

<7> [280.646565] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C]

<7> [280.647921] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C]

<7> [280.648924] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A]

<7> [280.650174] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B]

<7> [280.651532] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C]

<7> [280.652889] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1]

<7> [280.655496] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A]

<7> [280.658054] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:84:pipe B]

<7> [280.658992] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:109:pipe C]

<7> [280.762316] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [280.765747] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [280.767388] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [280.769365] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [280.772457] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [280.792269] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [280.871011] i915 0000:00:02.0: [drm:compute_baseline_pipe_bpp [i915]] [CONNECTOR:111:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [280.872135] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:110:DDI A/PHY A][CRTC:59:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [280.873154] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000

<7> [280.874341] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [280.876236] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:110:DDI A/PHY A] [CRTC:59:pipe A]

<7> [280.877221] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [280.878393] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [280.879714] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [280.881086] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [280.882544] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [280.883881] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [280.885108] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [280.886281] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [280.887357] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [280.888526] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [280.889805] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [280.891107] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [280.892407] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [280.893524] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [280.894542] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [280.895711] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [280.896758] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [280.897952] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [280.898991] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [280.900190] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [280.901440] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [280.902689] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [280.903705] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [280.904907] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [280.905921] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [280.907059] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [280.908063] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [280.909230] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [280.910365] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [280.911594] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [280.912679] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [280.913769] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [280.914778] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [280.915921] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [280.917072] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [280.918236] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [280.919275] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [280.920557] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [280.921626] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [280.922815] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset

<7> [280.924064] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [280.925198] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [280.926168] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [280.927270] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [280.928261] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [280.929392] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [280.930462] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [280.931507] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [280.932979] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [280.934491] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [280.935877] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [280.937227] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [280.938602] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [280.939730] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:59:pipe A] allocated DPLL 0

<7> [280.940745] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:59:pipe A] reserving DPLL 0

<7> [280.942197] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: yes [modeset]

<7> [280.943578] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [280.944952] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [280.946331] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [280.947701] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [280.949030] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [280.950346] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [280.951425] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [280.952626] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [280.953620] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [280.954821] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [280.955854] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [280.957002] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [280.958003] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [280.959186] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [280.960396] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [280.961742] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [280.963094] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [280.964435] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [280.965827] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [280.966880] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [280.967857] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [280.969182] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [280.970091] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [280.970989] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [280.971911] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [280.972832] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [280.973457] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [280.974191] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [280.975115] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [280.976026] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [280.976928] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [280.977854] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [280.978540] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [280.979214] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [280.979799] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [280.980283] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [280.980793] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [280.981339] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [280.981845] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [280.982386] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [280.982884] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [280.983425] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [280.984051] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [280.984609] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:112] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [280.985150] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [280.985738] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [280.986208] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no

<7> [280.986731] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no

<7> [280.998744] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [281.007921] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [281.008509] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [281.010009] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [281.010812] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [281.012507] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [281.013557] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A]

<7> [281.013989] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B]

<7> [281.014383] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A]

<7> [281.014751] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B]

<7> [281.015105] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C]

<7> [281.015457] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C]

<7> [281.015828] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A]

<7> [281.016192] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B]

<7> [281.016542] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C]

<7> [281.017179] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:59:pipe A]

<7> [281.017558] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [281.018220] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power on

<7> [281.018730] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (105 ms remaining)

<7> [281.130043] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [281.201297] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [281.202426] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power on

<7> [281.205172] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003

<7> [281.253062] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [281.254122] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long

<7> [281.255109] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [281.257886] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A]

<7> [281.409814] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [281.411141] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [281.412696] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [281.416494] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turning VDD on

<7> [281.417812] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b

<7> [281.423039] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [281.424256] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [281.428263] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [281.429447] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [281.431008] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [281.433992] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Clock recovery OK

<7> [281.435128] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [281.436251] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [281.439808] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [281.440962] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [281.442239] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [281.446469] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [281.448074] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [281.449470] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [281.453185] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [281.454655] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [281.457073] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [281.460190] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [281.461217] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [281.463968] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 37

<7> [281.476064] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [281.482520] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1]

<7> [281.484016] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A]

<7> [281.488054] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [281.488670] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<6> [281.494474] [IGT] i915_pm_rpm: starting subtest module-reload

<7> [281.494888] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [281.502955] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [281.504482] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [281.506107] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [281.507774] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [281.507816] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [281.509157] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [281.515554] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [281.515649] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [281.517254] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [281.523012] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [281.524995] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [281.526385] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [281.527963] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [281.529396] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [281.529436] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [281.530795] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [281.536134] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [281.536166] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [281.640194] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [281.641053] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [281.653782] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [281.680363] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [281.680862] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [281.693762] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [281.787015] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [281.788168] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [281.796251] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [281.796604] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [281.796887] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [281.797160] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [281.797425] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [281.798220] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [281.798510] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [281.799735] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [281.800024] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [281.801175] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [281.881412] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [281.882255] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [281.882634] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [281.883065] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [281.885210] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:112] is removed

<7> [281.885351] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [281.886188] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [281.886899] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [281.887397] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [281.887913] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [281.888386] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [281.889221] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [281.909691] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [281.910363] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [281.911075] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [281.911736] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [281.912492] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [281.913305] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [281.914130] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [281.914930] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [281.915735] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [281.916314] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [281.917143] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [281.917882] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [281.918545] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [281.919540] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [281.920379] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [281.921031] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [281.921624] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [281.922124] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [281.922649] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [281.923194] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [281.923714] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [281.924202] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [281.924761] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [281.925262] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [281.925776] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [281.926282] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [281.926849] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [281.927348] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [281.927860] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [281.928413] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [281.929107] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [281.929789] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [281.930441] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [281.931124] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [281.931763] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [281.932242] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [281.932752] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [281.933407] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [281.934098] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [281.934774] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [281.935432] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset

<7> [281.936129] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:59:pipe A] releasing DPLL 0

<7> [281.936880] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [281.937448] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [281.938143] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [281.938643] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [281.939104] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [281.939590] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [281.940148] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [modeset]

<7> [281.940654] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no

<7> [281.941211] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no

<7> [281.941780] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no

<7> [281.943145] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [282.145760] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 0

<7> [282.146461] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [282.161262] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power off

<7> [282.161862] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [282.161855] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [282.162648] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - short

<7> [282.163340] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [282.215089] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [282.216505] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long

<7> [282.217663] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [282.221621] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [282.225923] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:110:DDI A/PHY A]

<7> [282.227751] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:59:pipe A]

<7> [282.227834] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A]

<7> [282.231482] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [282.233171] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [282.238151] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A]

<7> [282.239958] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B]

<7> [282.242900] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A]

<7> [282.244150] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B]

<7> [282.245617] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C]

<7> [282.247204] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C]

<7> [282.248758] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A]

<7> [282.250308] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B]

<7> [282.251593] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C]

<7> [282.252333] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1]

<7> [282.254076] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A]

<7> [282.287859] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [282.302016] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:111:eDP-1] removing connector from sysfs

<7> [282.317954] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:119:DP-1] removing connector from sysfs

<7> [282.321309] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:128:HDMI-A-1] removing connector from sysfs

<7> [282.328983] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:134:DP-2] removing connector from sysfs

<7> [282.335391] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:140:HDMI-A-2] removing connector from sysfs

<7> [282.368983] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (355 ms remaining)

<7> [282.730037] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [282.812162] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<5> [284.293865] Setting dangerous option force_probe - tainting kernel

<6> [284.308631] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0

<7> [284.311536] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K

<7> [284.311986] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [284.312293] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH

<7> [284.312646] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [284.313171] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [284.313839] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [284.314243] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [284.315788] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [284.316194] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [284.316628] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [284.316996] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [284.317010] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [284.318000] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [284.318061] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047

<7> [284.318504] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [284.318903] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7715 MiB [mem 0x00000000-0x1e2383fff], io: n/a

<7> [284.319253] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a

<7> [284.320230] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018

<7> [284.320769] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [284.321189] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [284.321629] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [284.322045] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [284.330580] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [284.330908] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [284.331203] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [284.331533] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [284.331990] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [284.332462] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [284.332915] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no

<7> [284.333365] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [284.333838] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [284.334289] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no

<7> [284.334755] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes

<7> [284.335203] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no

<7> [284.335663] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3

<7> [284.336107] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [284.336570] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0

<7> [284.337018] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0

<7> [284.338282] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [284.338779] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203

<7> [284.339247] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [284.339719] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [284.340173] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [284.340643] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [284.341104] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 850)

<7> [284.341576] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [284.342031] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [284.342498] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [284.342953] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [284.343422] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136)

<7> [284.343865] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [284.344308] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [284.344773] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [284.345231] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [284.345706] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [284.346172] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [284.346612] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [284.347037] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [284.347474] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [284.347902] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [284.348326] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [284.348764] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [284.349202] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [284.349677] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [284.350224] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [284.350714] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [284.351161] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [284.351613] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [284.352045] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [284.352486] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [284.353044] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [284.354182] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [284.354663] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [284.355118] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [284.355665] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [284.356115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [284.356581] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [284.357022] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [284.358348] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<7> [284.360656] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [284.361325] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [284.361364] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [284.362134] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [284.362618] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [284.362652] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [284.363068] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided

<7> [284.363070] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [284.363597] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec)

<7> [284.363977] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec)

<6> [284.364352] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<7> [284.364304] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec)

<7> [284.364756] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec)

<7> [284.365165] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec)

<7> [284.365583] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec)

<7> [284.366006] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec)

<7> [284.366425] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec)

<7> [284.366755] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec)

<7> [284.367050] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec)

<7> [284.367431] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec)

<7> [284.367840] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec)

<7> [284.368246] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec)

<7> [284.368682] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec)

<7> [284.369102] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec)

<7> [284.375116] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available.

<7> [284.388542] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [284.389078] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:110:DDI A/PHY A] Using AUX CH A (VBT)

<7> [284.389752] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:110:DDI A/PHY A]

<7> [284.395452] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [284.395781] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [284.396087] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [284.396391] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [284.396756] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [284.397188] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [284.397678] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP

<7> [284.398116] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [284.398612] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0

<7> [284.399059] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0

<7> [284.399656] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:110:DDI A/PHY A] initial power sequencer: PPS 0

<7> [284.401026] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [284.401488] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [284.401909] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [284.402328] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [284.402773] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [284.403238] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [284.403956] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turning VDD on

<7> [284.405024] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [284.405516] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [284.415565] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [284.415915] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [284.416208] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [284.618593] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [284.619722] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [284.621751] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00

<7> [284.630907] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1

<7> [284.654092] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [284.654149] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor

<7> [284.654185] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0

<7> [284.654896] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:111:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [284.658271] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:111:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [284.659866] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:111:eDP-1] DRRS type: static

<7> [284.663283] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:111:eDP-1] Using native PCH PWM for backlight control

<7> [284.665339] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:111:eDP-1] backlight initialized, disabled, brightness 0/937

<7> [284.667882] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [284.669318] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [284.670768] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [284.672371] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [284.673861] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [284.675634] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [284.679341] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:118:DDI B/PHY B] Using AUX CH B (VBT)

<7> [284.681619] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:118:DDI B/PHY B]

<7> [284.687921] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [284.689572] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:118:DDI B/PHY B]

<7> [284.691066] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:118:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [284.695732] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:133:DDI C/PHY C] Using AUX CH C (VBT)

<7> [284.697976] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:133:DDI C/PHY C]

<7> [284.702756] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [284.704463] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:133:DDI C/PHY C]

<7> [284.706131] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:133:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [284.709895] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled

<6> [284.711440] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem

<7> [284.712841] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:59:pipe A] hw state readout: disabled

<7> [284.715294] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:84:pipe B] hw state readout: disabled

<7> [284.717774] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:109:pipe C] hw state readout: disabled

<7> [284.719526] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:35:plane 1A] hw state readout: disabled, pipe A

<7> [284.721343] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:44:plane 2A] hw state readout: disabled, pipe A

<7> [284.723213] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:53:cursor A] hw state readout: disabled, pipe A

<7> [284.725552] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 1B] hw state readout: disabled, pipe B

<7> [284.727577] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:69:plane 2B] hw state readout: disabled, pipe B

<7> [284.729158] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:78:cursor B] hw state readout: disabled, pipe B

<7> [284.730216] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:85:plane 1C] hw state readout: disabled, pipe C

<7> [284.731220] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 2C] hw state readout: disabled, pipe C

<7> [284.732271] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:103:cursor C] hw state readout: disabled, pipe C

<7> [284.733266] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [284.734287] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [284.735249] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST A] hw state readout: disabled, pipe A

<7> [284.736456] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST B] hw state readout: disabled, pipe B

<7> [284.737480] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:122:DP-MST C] hw state readout: disabled, pipe C

<7> [284.738307] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [284.738977] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST A] hw state readout: disabled, pipe A

<7> [284.739654] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:136:DP-MST B] hw state readout: disabled, pipe B

<7> [284.740253] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:137:DP-MST C] hw state readout: disabled, pipe C

<7> [284.740982] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [284.741726] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [284.742584] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [284.743340] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [284.744256] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:111:eDP-1] hw state readout: disabled

<7> [284.745019] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:119:DP-1] hw state readout: disabled

<7> [284.745906] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:128:HDMI-A-1] hw state readout: disabled

<7> [284.746725] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:134:DP-2] hw state readout: disabled

<7> [284.747399] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:140:HDMI-A-2] hw state readout: disabled

<7> [284.747983] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:35:plane 1A] min_cdclk 0 kHz

<7> [284.748549] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:44:plane 2A] min_cdclk 0 kHz

<7> [284.749668] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:53:cursor A] min_cdclk 0 kHz

<7> [284.750152] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:59:pipe A] min_cdclk 0 kHz

<7> [284.750672] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 1B] min_cdclk 0 kHz

<7> [284.751167] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:69:plane 2B] min_cdclk 0 kHz

<7> [284.751670] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:78:cursor B] min_cdclk 0 kHz

<7> [284.752262] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:84:pipe B] min_cdclk 0 kHz

<7> [284.752853] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:85:plane 1C] min_cdclk 0 kHz

<7> [284.753356] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 2C] min_cdclk 0 kHz

<7> [284.753861] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:103:cursor C] min_cdclk 0 kHz

<7> [284.754362] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:109:pipe C] min_cdclk 0 kHz

<7> [284.754867] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:59:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [284.755357] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:84:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [284.755855] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:109:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [284.757165] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [setup_hw_state]

<7> [284.757608] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:84:pipe B] enable: no [setup_hw_state]

<7> [284.758001] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:109:pipe C] enable: no [setup_hw_state]

<7> [284.758527] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [284.759181] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [284.759654] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [284.760135] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [284.760673] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global

<7> [284.764048] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [284.764562] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [284.764989] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0

<7> [284.791046] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [284.791367] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [284.791747] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [284.792108] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [284.792481] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 0: start 0x8

<7> [284.792928] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 1: start 0x108

<7> [284.793386] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 2: start 0x208

<7> [284.793825] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 3: start 0x308

<7> [284.794272] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 4: start 0x3c8

<7> [284.794719] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 0: start 0x8

<7> [284.795143] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 1: start 0x108

<7> [284.795595] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 2: start 0x208

<7> [284.796027] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 3: start 0x308

<7> [284.796504] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 4: start 0x3c8

<7> [284.796939] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 0: start 0x8

<7> [284.797386] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 1: start 0x108

<7> [284.797819] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 2: start 0x208

<7> [284.798254] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 3: start 0x308

<7> [284.798695] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 4: start 0x3c8

<7> [284.799504] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [fastset]

<7> [284.799949] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:84:pipe B] enable: no [fastset]

<7> [284.800400] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:109:pipe C] enable: no [fastset]

<7> [284.801142] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A]

<7> [284.802120] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:84:pipe B]

<7> [284.802823] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:109:pipe C]

<7> [284.803516] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [284.810255] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:111:eDP-1] adding connector to sysfs

<7> [284.811650] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:111:eDP-1] backlight device intel_backlight registered

<7> [284.812023] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:111:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [284.812949] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [284.816470] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:111:eDP-1] generating connector hotplug event

<7> [284.816585] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:119:DP-1] adding connector to sysfs

<7> [284.817816] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [284.820472] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:119:DP-1] generating connector hotplug event

<7> [284.820591] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:128:HDMI-A-1] adding connector to sysfs

<7> [284.821451] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:128:HDMI-A-1] generating connector hotplug event

<7> [284.821606] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:134:DP-2] adding connector to sysfs

<7> [284.828664] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [284.834108] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:134:DP-2] generating connector hotplug event

<7> [284.834282] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:140:HDMI-A-2] adding connector to sysfs

<7> [284.836605] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:140:HDMI-A-2] generating connector hotplug event

<6> [284.836748] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0

<7> [284.843231] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [284.879391] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [284.895578] input: Video Bus as /devices/pci0000:00/acpi.video_bus.0/input/input35

<7> [284.898035] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [284.905327] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [284.905833] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:119:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [284.906268] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [284.906445] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:59:pipe A] not active, skipping

<7> [284.906719] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:128:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [284.906867] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:84:pipe B] not active, skipping

<7> [284.907280] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:109:pipe C] not active, skipping

<7> [284.907716] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config

<7> [284.908448] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [284.909520] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [284.911318] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [284.911815] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:134:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [284.912256] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [284.912677] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:140:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [284.914856] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1]

<7> [284.914872] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1]

<7> [284.915204] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] status updated from unknown to disconnected

<7> [284.915221] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] disconnected

<7> [284.915230] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:111:eDP-1] EDID changed, epoch counter 2

<7> [284.915255] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1]

<7> [284.915263] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [284.915596] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [284.915753] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected

<7> [284.915766] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1]

<7> [284.915778] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [284.916133] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected

<7> [284.916143] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2]

<7> [284.916152] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [284.916502] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected

<7> [284.916515] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2]

<7> [284.916525] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [284.916878] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected

<7> [284.916887] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [284.916894] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] enabled? no

<7> [284.916901] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:DP-1] enabled? no

<7> [284.916906] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-1] enabled? no

<7> [284.916912] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:134:DP-2] enabled? no

<7> [284.916918] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:140:HDMI-A-2] enabled? no

<7> [284.916955] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [284.916970] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [284.917056] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [284.917067] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [284.918267] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [284.923346] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9

<7> [284.923870] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [284.923976] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1]

<7> [284.923987] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1]

<7> [284.924282] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] disconnected

<7> [284.924293] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1]

<7> [284.924301] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [284.924633] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected

<7> [284.924646] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1]

<7> [284.924655] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [284.925054] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected

<7> [284.925067] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2]

<7> [284.925079] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [284.925505] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected

<7> [284.925517] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2]

<7> [284.925529] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [284.925924] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected

<7> [284.925936] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [284.925945] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] enabled? no

<7> [284.925955] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:DP-1] enabled? no

<7> [284.925964] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-1] enabled? no

<7> [284.926914] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:134:DP-2] enabled? no

<7> [284.926926] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:140:HDMI-A-2] enabled? no

<7> [284.926984] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [284.927005] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [284.927111] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [284.927136] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [284.927250] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [284.927901] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [284.927829] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0

<7> [284.928236] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no

<7> [284.928691] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1]

<7> [284.928656] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no

<7> [284.928717] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1]

<7> [284.929071] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] disconnected

<7> [284.929090] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1]

<7> [284.929099] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [284.929079] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no

<7> [284.929514] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes

<7> [284.929826] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected

<7> [284.929842] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1]

<7> [284.929854] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [284.929936] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes

<7> [284.930277] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected

<7> [284.930289] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2]

<7> [284.930301] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [284.930357] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no

<7> [284.930738] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected

<7> [284.930751] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2]

<7> [284.930762] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [284.930808] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes

<7> [284.931162] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected

<7> [284.931173] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [284.931193] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] enabled? no

<7> [284.931202] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:DP-1] enabled? no

<7> [284.931210] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-1] enabled? no

<7> [284.931223] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:134:DP-2] enabled? no

<7> [284.931232] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:140:HDMI-A-2] enabled? no

<7> [284.931220] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no

<7> [284.931663] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes

<7> [284.932095] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no

<7> [284.932546] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes

<7> [284.932986] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [284.933027] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [284.933157] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [284.932974] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no

<6> [284.933187] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [284.933276] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [284.933442] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes

<7> [284.933872] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes

<7> [284.934305] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no

<7> [284.934749] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no

<7> [284.935175] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes

<7> [284.935623] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes

<7> [284.936058] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no

<7> [284.936514] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz

<7> [284.938100] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device

<7> [284.939300] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [284.939756] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [284.940121] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [284.940491] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [284.940849] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [284.941432] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9

<7> [284.941769] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9

<7> [284.942099] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9

<7> [284.942460] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0

<7> [284.942776] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0

<7> [284.943098] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2

<7> [284.943464] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21

<7> [284.943802] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000

<7> [284.944143] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE

<7> [284.944501] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48

<7> [284.944841] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2

<7> [284.945176] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39

<7> [284.945537] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no

<7> [284.945881] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no

<7> [284.946211] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no

<7> [284.946567] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes

<7> [284.946907] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no

<7> [284.947245] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no

<7> [284.947598] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes

<7> [284.947928] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes

<7> [284.948257] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no

<7> [284.948698] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no

<7> [284.949047] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no

<7> [284.949404] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes

<7> [284.949742] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no

<7> [284.950078] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no

<7> [284.950441] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no

<7> [284.950782] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no

<7> [284.951123] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no

<7> [284.951482] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no

<7> [284.951815] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes

<7> [284.952152] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes

<7> [284.952514] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no

<7> [284.952853] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no

<7> [284.953198] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no

<7> [284.953562] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no

<7> [284.953908] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no

<7> [284.954252] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no

<7> [284.954610] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no

<7> [284.954952] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no

<7> [284.955295] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes

<7> [284.955657] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no

<7> [284.956001] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes

<7> [284.956342] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes

<7> [284.956700] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no

<7> [284.957042] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes

<7> [284.957406] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no

<7> [284.957749] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no

<7> [284.958094] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no

<7> [284.958457] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no

<7> [284.958800] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled

<7> [284.959142] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403

<7> [284.959502] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001

<7> [284.959838] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3

<7> [284.960177] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007

<7> [284.960544] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000

<7> [284.960885] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000

<7> [284.961222] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24

<7> [284.961584] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8

<7> [284.961923] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no

<7> [284.962266] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no

<7> [284.962630] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes

<6> [284.962974] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [284.962978] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [284.962983] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [284.979734] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4

<6> [284.980733] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])

<7> [284.981429] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [284.982320] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [284.984394] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [285.018897] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [285.019201] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [285.019499] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [285.020894] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [285.021278] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [285.021665] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [285.021943] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [285.022256] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [285.022647] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<6> [285.068855] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input36

<6> [285.079447] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input37

<6> [285.085448] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input38

<7> [286.131391] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [287.220625] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turning VDD off

<7> [287.220970] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [287.221270] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [287.221754] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [287.222037] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [287.222881] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [287.223287] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [287.223886] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long

<7> [287.224146] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [287.224252] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [287.225397] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A]

<7> [287.230350] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [287.300008] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [287.324405] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [287.332896] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [287.334121] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [287.334501] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [287.334491] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [287.334883] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [287.335370] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [287.335494] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [287.336732] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [287.337298] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [287.337481] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [287.350390] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [287.350730] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [287.351006] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [287.351310] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [287.352087] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [287.468887] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [287.469186] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [287.469857] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [287.470766] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [287.472854] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [287.481587] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [287.482679] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [287.484439] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [287.485323] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [287.486148] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [287.487039] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [287.487706] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [287.488358] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [287.488987] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [287.491557] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [287.492710] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [287.493300] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [287.494457] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [287.495342] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [287.563025] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [287.563372] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [287.564014] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [287.564600] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [287.565726] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [287.566149] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [287.566546] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [287.566931] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [287.567313] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [287.599568] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [287.618818] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:111:eDP-1] removing connector from sysfs

<7> [287.628824] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:119:DP-1] removing connector from sysfs

<7> [287.636628] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:128:HDMI-A-1] removing connector from sysfs

<7> [287.648121] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:134:DP-2] removing connector from sysfs

<7> [287.654566] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:140:HDMI-A-2] removing connector from sysfs

<7> [287.682360] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (39 ms remaining)

<7> [287.723477] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [287.733337] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<5> [289.149915] Setting dangerous option force_probe - tainting kernel

<6> [289.164702] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0

<7> [289.166937] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K

<7> [289.167405] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [289.167697] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH

<7> [289.167977] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [289.168369] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [289.168909] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [289.169213] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [289.170394] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [289.170662] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [289.170902] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [289.171174] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [289.171187] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [289.171898] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [289.171943] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047

<7> [289.172282] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [289.172560] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7715 MiB [mem 0x00000000-0x1e2383fff], io: n/a

<7> [289.172791] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a

<7> [289.173454] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018

<7> [289.173800] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [289.174076] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [289.174368] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [289.174658] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [289.183159] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [289.183470] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [289.183746] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [289.184019] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [289.184341] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [289.184765] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [289.185217] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no

<7> [289.185660] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [289.186121] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [289.186544] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no

<7> [289.186964] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes

<7> [289.187392] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no

<7> [289.187811] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3

<7> [289.188262] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [289.188693] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0

<7> [289.189137] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0

<7> [289.190448] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [289.190781] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203

<7> [289.191200] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [289.191619] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [289.192035] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [289.192522] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [289.192906] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 850)

<7> [289.193237] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [289.193592] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [289.194012] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [289.194446] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [289.194858] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136)

<7> [289.195282] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [289.195656] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [289.195948] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [289.196280] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [289.196615] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [289.196914] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [289.197220] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [289.197544] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [289.197943] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [289.198400] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [289.198800] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [289.199225] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [289.199620] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [289.199938] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [289.200359] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [289.200814] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [289.201252] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [289.201659] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [289.202099] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [289.202471] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [289.202864] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [289.203284] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [289.203682] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [289.204734] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [289.205235] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [289.205549] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [289.205922] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [289.206358] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [289.207634] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<7> [289.209823] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [289.211172] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [289.212005] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [289.212536] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [289.213604] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [289.213654] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided

<7> [289.213997] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec)

<7> [289.214020] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [289.214314] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec)

<7> [289.214486] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [289.214718] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec)

<6> [289.215333] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<7> [289.215148] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec)

<7> [289.215568] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec)

<7> [289.215990] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec)

<7> [289.216433] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec)

<7> [289.216857] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec)

<7> [289.217287] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec)

<7> [289.217707] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec)

<7> [289.218137] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec)

<7> [289.218561] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec)

<7> [289.218985] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec)

<7> [289.219418] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec)

<7> [289.219837] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec)

<7> [289.225952] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available.

<7> [289.230571] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [289.230944] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:110:DDI A/PHY A] Using AUX CH A (VBT)

<7> [289.231398] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:110:DDI A/PHY A]

<7> [289.238100] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [289.238564] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [289.238973] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [289.239407] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [289.239835] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [289.240288] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [289.240695] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP

<7> [289.241114] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [289.241512] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0

<7> [289.241917] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0

<7> [289.242481] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:110:DDI A/PHY A] initial power sequencer: PPS 0

<7> [289.242944] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [289.243368] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [289.243772] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [289.244187] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [289.244574] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [289.245023] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [289.246414] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turning VDD on

<7> [289.246863] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [289.247362] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [289.257254] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [289.257600] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [289.257879] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [289.466030] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [289.466954] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [289.470023] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00

<7> [289.477219] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1

<7> [289.496691] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [289.496731] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor

<7> [289.496755] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0

<7> [289.497206] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:111:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [289.500503] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:111:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [289.502307] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:111:eDP-1] DRRS type: static

<7> [289.504554] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:111:eDP-1] Using native PCH PWM for backlight control

<7> [289.506439] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:111:eDP-1] backlight initialized, disabled, brightness 0/937

<7> [289.509117] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [289.510854] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [289.512629] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [289.514368] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [289.516163] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [289.517965] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [289.521555] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:118:DDI B/PHY B] Using AUX CH B (VBT)

<7> [289.523537] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:118:DDI B/PHY B]

<7> [289.529116] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [289.531183] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:118:DDI B/PHY B]

<7> [289.532950] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:118:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [289.536926] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:133:DDI C/PHY C] Using AUX CH C (VBT)

<7> [289.538911] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:133:DDI C/PHY C]

<7> [289.543342] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [289.545308] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:133:DDI C/PHY C]

<7> [289.547053] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:133:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [289.553280] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled

<6> [289.555176] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem

<7> [289.556431] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:59:pipe A] hw state readout: disabled

<7> [289.559191] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:84:pipe B] hw state readout: disabled

<7> [289.561898] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:109:pipe C] hw state readout: disabled

<7> [289.563788] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:35:plane 1A] hw state readout: disabled, pipe A

<7> [289.565751] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:44:plane 2A] hw state readout: disabled, pipe A

<7> [289.567685] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:53:cursor A] hw state readout: disabled, pipe A

<7> [289.569462] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 1B] hw state readout: disabled, pipe B

<7> [289.570621] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:69:plane 2B] hw state readout: disabled, pipe B

<7> [289.571598] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:78:cursor B] hw state readout: disabled, pipe B

<7> [289.572582] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:85:plane 1C] hw state readout: disabled, pipe C

<7> [289.573512] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 2C] hw state readout: disabled, pipe C

<7> [289.574514] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:103:cursor C] hw state readout: disabled, pipe C

<7> [289.575474] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [289.576480] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [289.577548] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST A] hw state readout: disabled, pipe A

<7> [289.578466] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST B] hw state readout: disabled, pipe B

<7> [289.579039] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:122:DP-MST C] hw state readout: disabled, pipe C

<7> [289.579736] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [289.580411] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST A] hw state readout: disabled, pipe A

<7> [289.580981] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:136:DP-MST B] hw state readout: disabled, pipe B

<7> [289.581576] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:137:DP-MST C] hw state readout: disabled, pipe C

<7> [289.582360] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [289.583985] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [289.584723] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [289.585463] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [289.586320] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:111:eDP-1] hw state readout: disabled

<7> [289.587023] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:119:DP-1] hw state readout: disabled

<7> [289.587778] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:128:HDMI-A-1] hw state readout: disabled

<7> [289.588370] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:134:DP-2] hw state readout: disabled

<7> [289.588902] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:140:HDMI-A-2] hw state readout: disabled

<7> [289.589401] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:35:plane 1A] min_cdclk 0 kHz

<7> [289.589913] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:44:plane 2A] min_cdclk 0 kHz

<7> [289.590404] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:53:cursor A] min_cdclk 0 kHz

<7> [289.590916] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:59:pipe A] min_cdclk 0 kHz

<7> [289.591475] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 1B] min_cdclk 0 kHz

<7> [289.592007] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:69:plane 2B] min_cdclk 0 kHz

<7> [289.592517] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:78:cursor B] min_cdclk 0 kHz

<7> [289.593044] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:84:pipe B] min_cdclk 0 kHz

<7> [289.593528] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:85:plane 1C] min_cdclk 0 kHz

<7> [289.594037] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 2C] min_cdclk 0 kHz

<7> [289.594537] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:103:cursor C] min_cdclk 0 kHz

<7> [289.595041] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:109:pipe C] min_cdclk 0 kHz

<7> [289.595575] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:59:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [289.596126] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:84:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [289.596483] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:109:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [289.597406] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [setup_hw_state]

<7> [289.597924] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:84:pipe B] enable: no [setup_hw_state]

<7> [289.598460] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:109:pipe C] enable: no [setup_hw_state]

<7> [289.598979] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [289.599459] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [289.599801] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [289.600252] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [289.600759] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global

<7> [289.604445] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [289.604838] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [289.605243] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0

<7> [289.630706] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [289.630988] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [289.631258] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [289.631521] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [289.631761] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 0: start 0x8

<7> [289.632049] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 1: start 0x108

<7> [289.632383] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 2: start 0x208

<7> [289.632692] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 3: start 0x308

<7> [289.632987] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 4: start 0x3c8

<7> [289.633334] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 0: start 0x8

<7> [289.633840] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 1: start 0x108

<7> [289.634317] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 2: start 0x208

<7> [289.634691] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 3: start 0x308

<7> [289.634986] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 4: start 0x3c8

<7> [289.635392] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 0: start 0x8

<7> [289.635696] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 1: start 0x108

<7> [289.635992] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 2: start 0x208

<7> [289.636345] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 3: start 0x308

<7> [289.636665] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 4: start 0x3c8

<7> [289.637249] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [fastset]

<7> [289.637555] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:84:pipe B] enable: no [fastset]

<7> [289.637850] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:109:pipe C] enable: no [fastset]

<7> [289.638440] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A]

<7> [289.639134] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:84:pipe B]

<7> [289.639696] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:109:pipe C]

<7> [289.640299] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [289.647993] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:111:eDP-1] adding connector to sysfs

<7> [289.650211] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:111:eDP-1] backlight device intel_backlight registered

<7> [289.650643] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:111:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [289.651606] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [289.656327] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:111:eDP-1] generating connector hotplug event

<7> [289.656469] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:119:DP-1] adding connector to sysfs

<7> [289.657914] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [289.661795] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:119:DP-1] generating connector hotplug event

<7> [289.661960] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:128:HDMI-A-1] adding connector to sysfs

<7> [289.663817] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:128:HDMI-A-1] generating connector hotplug event

<7> [289.663959] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:134:DP-2] adding connector to sysfs

<7> [289.665349] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [289.668406] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:134:DP-2] generating connector hotplug event

<7> [289.668575] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:140:HDMI-A-2] adding connector to sysfs

<7> [289.669904] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:140:HDMI-A-2] generating connector hotplug event

<6> [289.670041] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0

<7> [289.676354] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [289.711559] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [289.723476] input: Video Bus as /devices/pci0000:00/acpi.video_bus.0/input/input39

<7> [289.724747] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [289.731854] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [289.734708] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:59:pipe A] not active, skipping

<7> [289.735206] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:84:pipe B] not active, skipping

<7> [289.735622] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:109:pipe C] not active, skipping

<7> [289.735981] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config

<7> [289.736828] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [289.737392] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:119:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [289.737862] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [289.738970] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [289.739454] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [289.740090] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [289.740567] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [289.740580] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [289.740988] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [289.742754] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [289.746411] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [289.746427] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [289.746955] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:128:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [289.747414] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [289.751955] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:134:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [289.752471] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [289.753177] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [289.753602] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [289.756122] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [289.757479] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [289.757492] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [289.757937] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [289.761388] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [289.761403] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [289.761898] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:140:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [289.764101] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1]

<7> [289.764348] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [289.764120] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1]

<7> [289.764924] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [289.767091] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [289.767559] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [289.768032] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [289.768076] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor

<7> [289.768086] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0

<7> [289.768130] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no

<7> [289.768556] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [289.768985] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [289.770444] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] status updated from unknown to connected

<7> [289.770741] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes:

<7> [289.770753] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [289.770766] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [289.770781] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1]

<7> [289.770793] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [289.771461] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [289.775384] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected

<7> [289.775405] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1]

<7> [289.775418] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [289.776537] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [289.776986] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [289.777670] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [289.778236] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [289.778249] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [289.778673] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [289.782854] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [289.782871] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [289.784246] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected

<7> [289.784265] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2]

<7> [289.784278] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [289.788909] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected

<7> [289.788931] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2]

<7> [289.788944] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [289.789743] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [289.790199] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [289.790808] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [289.791442] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [289.791455] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [289.791885] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [289.795344] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [289.795358] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [289.795831] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected

<7> [289.795846] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] enabled? yes

<7> [289.795857] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:DP-1] enabled? no

<7> [289.795866] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-1] enabled? no

<7> [289.795875] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:134:DP-2] enabled? no

<7> [289.795883] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:140:HDMI-A-2] enabled? no

<7> [289.795940] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [289.795976] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] found preferred mode: 3200x1800

<7> [289.795986] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [289.796020] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:59:pipe A] desired mode 3200x1800 set (0,0)

<7> [289.796186] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [289.796244] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] no BIOS fb, allocating a new one

<7> [289.803966] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 3200x1800 fb

<6> [289.806314] fbcon: i915drmfb (fb0) is primary device

<6> [289.807453] Console: switching to colour frame buffer device 200x56

<6> [289.807471] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device

<7> [289.807487] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9

<7> [289.807954] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0

<7> [289.808424] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no

<7> [289.810037] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [289.810078] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [289.810763] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1]

<7> [289.810788] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1]

<7> [289.812395] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [289.812867] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [289.813332] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [289.814685] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no

<7> [289.815163] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no

<7> [289.815593] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes

<7> [289.816089] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes

<7> [289.817240] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [289.817257] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor

<7> [289.817275] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0

<7> [289.817353] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no

<7> [289.817783] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [289.818229] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [289.820037] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no

<7> [289.821692] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes:

<7> [289.821719] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [289.821733] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [289.821747] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1]

<7> [289.821759] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [289.822802] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes

<7> [289.823280] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no

<7> [289.823715] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes

<7> [289.824654] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no

<7> [289.825139] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes

<7> [289.825577] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no

<7> [289.825977] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes

<7> [289.826525] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected

<7> [289.826547] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1]

<7> [289.826560] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [289.827629] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [289.829212] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [289.829873] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [289.831017] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [289.831031] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [289.831564] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [289.832128] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes

<7> [289.834174] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no

<7> [289.834646] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no

<7> [289.836673] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [289.836692] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [289.837266] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes

<7> [289.837720] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes

<7> [289.838209] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no

<7> [289.838786] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected

<7> [289.838805] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2]

<7> [289.838818] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [289.839460] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz

<7> [289.841233] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device

<7> [289.841678] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [289.843363] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [289.843862] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [289.844952] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [289.845517] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [289.846443] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9

<7> [289.846793] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9

<7> [289.847865] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected

<7> [289.847887] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2]

<7> [289.847900] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [289.848644] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [289.849076] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [289.849688] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [289.850271] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [289.850284] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [289.850709] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [289.854282] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [289.854298] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [289.854769] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected

<7> [289.854784] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] enabled? yes

<7> [289.854795] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:DP-1] enabled? no

<7> [289.854804] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-1] enabled? no

<7> [289.854813] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:134:DP-2] enabled? no

<7> [289.854822] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:140:HDMI-A-2] enabled? no

<7> [289.855741] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9

<7> [289.856820] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [289.856875] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] found preferred mode: 3200x1800

<7> [289.856887] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config

<7> [289.856975] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:59:pipe A] desired mode 3200x1800 set (0,0)

<7> [289.857899] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0

<7> [289.859842] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0

<7> [289.861637] i915 0000:00:02.0: [drm:compute_baseline_pipe_bpp [i915]] [CONNECTOR:111:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [289.862012] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:110:DDI A/PHY A][CRTC:59:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [289.862118] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2

<7> [289.862470] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21

<7> [289.862782] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000

<7> [289.862983] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000

<7> [289.863141] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE

<7> [289.863490] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48

<7> [289.863548] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [289.863839] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2

<7> [289.864010] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:110:DDI A/PHY A] [CRTC:59:pipe A]

<7> [289.864204] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39

<7> [289.864553] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no

<7> [289.864537] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [289.864901] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no

<7> [289.864993] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [289.865268] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no

<7> [289.865541] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [289.865617] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes

<7> [289.865962] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no

<7> [289.865999] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [289.866875] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [289.867413] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [289.868500] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no

<7> [289.868689] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [289.868857] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes

<7> [289.869217] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes

<7> [289.869306] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [289.869565] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no

<7> [289.869764] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [289.869913] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no

<7> [289.870273] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no

<7> [289.870522] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [289.870962] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [289.871268] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes

<7> [289.871612] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no

<7> [289.871641] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [289.871961] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no

<7> [289.872225] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [289.872445] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no

<7> [289.872673] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [289.872800] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no

<7> [289.873198] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no

<7> [289.873324] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [289.873544] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no

<7> [289.873783] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [289.873893] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes

<7> [289.874422] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [289.874846] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [289.875465] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [289.875890] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [289.876381] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes

<7> [289.876491] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [289.876731] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no

<7> [289.876946] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [289.877099] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no

<7> [289.877447] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no

<7> [289.877633] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [289.877789] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no

<7> [289.878147] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no

<7> [289.878282] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [289.878728] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [289.879177] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no

<7> [289.879350] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [289.879525] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no

<7> [289.879810] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [289.879874] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no

<7> [289.880376] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes

<7> [289.880393] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [289.880730] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no

<7> [289.880851] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [289.881105] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes

<7> [289.881450] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes

<7> [289.881563] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [289.881797] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no

<7> [289.882021] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [289.882636] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [289.883222] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [289.883646] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [289.884282] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [289.884721] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dpll_hw_state

<7> [289.885242] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes

<7> [289.885355] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [289.885591] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no

<7> [289.885811] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0

<7> [289.885940] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no

<7> [289.886426] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no

<7> [289.886728] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no

<7> [289.887232] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled

<7> [289.887395] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [289.887576] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403

<7> [289.887850] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [289.887927] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001

<7> [289.888948] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [289.889595] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [289.890154] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [289.890426] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3

<7> [289.890598] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [289.890777] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007

<7> [289.891195] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000

<7> [289.891524] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000

<7> [289.891865] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24

<7> [289.891909] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset

<7> [289.892515] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [289.892863] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8

<7> [289.892945] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [289.893399] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [289.893475] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no

<7> [289.893825] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no

<7> [289.893846] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [289.894254] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes

<7> [289.894329] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<6> [289.894604] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [289.894607] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [289.894611] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [289.897067] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [289.897467] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [289.897839] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [289.898389] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [289.898826] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [289.899237] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [289.899614] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [289.899990] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [289.900392] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:59:pipe A] allocated DPLL 0

<7> [289.900776] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:59:pipe A] reserving DPLL 0

<7> [289.901192] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: yes [modeset]

<7> [289.901569] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [289.901889] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [289.902230] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [289.902564] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [289.902935] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [289.903324] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [289.903700] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [289.904107] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [289.904470] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [289.904824] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [289.905274] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [289.905634] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [289.905992] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [289.906374] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [289.906710] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [289.907015] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [289.907816] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [289.908209] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [289.908571] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [289.908877] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [289.909216] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [289.909580] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [289.911028] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [289.911439] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [289.911770] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [289.912091] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [289.912435] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [289.912736] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [289.913062] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [289.913374] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [289.913679] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [289.913976] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [289.914303] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [289.914662] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [289.915022] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [289.916060] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [289.916399] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [289.916719] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [289.917066] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [289.917370] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [289.917665] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [289.917966] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [289.919825] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [289.920246] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:112] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [289.920612] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [289.920973] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [289.921361] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no

<7> [289.921725] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no

<7> [289.922826] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [289.924481] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A]

<7> [289.924859] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B]

<7> [289.925251] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A]

<7> [289.925617] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B]

<7> [289.925988] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C]

<7> [289.926448] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C]

<7> [289.926822] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A]

<7> [289.927206] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B]

<7> [289.927586] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C]

<7> [289.929354] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:59:pipe A]

<7> [289.929775] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<6> [289.930758] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4

<7> [289.931077] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power on

<7> [289.931570] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [289.931975] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [289.942751] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [289.943075] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power on

<7> [289.943479] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000000b

<7> [290.143691] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [290.145319] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [290.149641] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [290.157317] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [290.158231] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [290.161510] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [290.162890] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [290.164260] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [290.170255] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Clock recovery OK

<7> [290.172089] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [290.173875] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [290.183805] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [290.185166] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [290.187143] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [290.195185] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [290.196291] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [290.197398] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [290.201802] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [290.203378] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [290.206104] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [290.209612] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [290.211190] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [290.214810] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 37

<7> [290.219796] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 383 us, max time under evasion is 250 us

<7> [290.226509] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [290.239308] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1]

<7> [290.241506] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A]

<7> [290.244938] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp

<6> [290.259821] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])

<7> [290.261183] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [290.267413] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [290.267449] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [290.267744] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1]

<7> [290.267782] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1]

<7> [290.271276] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [290.272466] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [290.273471] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [290.276082] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [290.276908] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [290.276934] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor

<7> [290.276952] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0

<7> [290.277068] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no

<7> [290.277750] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [290.278854] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [290.281558] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes:

<7> [290.281584] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [290.281609] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [290.281634] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1]

<7> [290.281657] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [290.282236] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [290.292206] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [290.295119] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected

<7> [290.295144] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1]

<7> [290.295159] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [290.296882] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [290.298102] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [290.298746] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [290.299318] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [290.299335] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [290.299831] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [290.307507] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [290.307525] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [290.308039] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected

<7> [290.308057] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2]

<7> [290.308071] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [290.312585] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected

<7> [290.312602] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2]

<7> [290.312614] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [290.314939] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [290.315346] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [290.316052] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [290.316468] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [290.316487] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [290.316838] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [290.321187] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [290.321201] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [290.321605] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected

<7> [290.321619] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] enabled? yes

<7> [290.321628] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:DP-1] enabled? no

<7> [290.321635] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-1] enabled? no

<7> [290.321642] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:134:DP-2] enabled? no

<7> [290.321649] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:140:HDMI-A-2] enabled? no

<7> [290.321701] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [290.321733] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] found preferred mode: 3200x1800

<7> [290.321742] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config

<7> [290.323114] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:59:pipe A] desired mode 3200x1800 set (0,0)

<7> [290.323810] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [290.323809] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1]

<7> [290.323834] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1]

<7> [290.324497] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [290.324874] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [290.325268] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [290.328710] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [290.328725] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor

<7> [290.328735] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0

<7> [290.328782] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no

<7> [290.329740] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [290.330848] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [290.333575] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes:

<7> [290.333590] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [290.333602] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [290.333809] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1]

<7> [290.333827] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [290.338593] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected

<7> [290.338747] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1]

<7> [290.338759] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [290.340860] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [290.341666] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [290.342594] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [290.343802] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [290.343815] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [290.344195] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [290.347547] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [290.347560] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [290.347987] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected

<7> [290.348497] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2]

<7> [290.348520] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [290.353070] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected

<7> [290.353258] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2]

<7> [290.353270] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [290.353962] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [290.354417] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [290.354847] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [290.354950] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [290.355290] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [290.355535] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [290.355545] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [290.355691] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [290.355897] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [290.359265] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [290.359281] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [290.359707] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected

<7> [290.359648] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [290.360073] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [290.360472] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [290.360860] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [290.361413] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [290.361809] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [290.367655] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1]

<7> [290.367674] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [290.372908] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected

<7> [290.374146] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1]

<7> [290.374162] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [290.374806] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [290.375307] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [290.375852] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [290.376347] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [290.376359] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [290.376735] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [290.380139] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [290.380152] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [290.381329] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected

<7> [290.382356] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2]

<7> [290.382370] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [290.386878] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected

<7> [290.388353] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2]

<7> [290.389082] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [290.390420] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [290.392048] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [290.392614] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [290.393119] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [290.393132] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [290.393520] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [290.397434] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [290.397449] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [290.397913] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected

<7> [290.398712] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1]

<7> [290.398726] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1]

<7> [290.399300] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [290.399697] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [290.400112] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [290.400568] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [290.400581] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor

<7> [290.400590] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0

<7> [290.400656] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no

<7> [290.401062] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [290.401466] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [290.403262] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes:

<7> [290.403277] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [290.403289] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [290.403338] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1]

<7> [290.403350] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [290.408241] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected

<7> [290.408298] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1]

<7> [290.408310] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [290.409043] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [290.409437] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [290.410037] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [290.411426] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [290.411439] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [290.411842] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [290.417536] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [290.417552] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [290.418266] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected

<7> [290.418321] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2]

<7> [290.418333] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [290.422899] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected

<7> [290.422958] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2]

<7> [290.422970] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [290.423708] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [290.424109] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [290.424678] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<6> [290.426353] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input40

<7> [290.426475] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [290.426491] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [290.426906] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [290.431012] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [290.431028] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [290.431482] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected

<7> [290.432471] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:144]

<6> [290.439423] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input41

<6> [290.443473] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input42

<7> [291.477135] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:59:pipe A]

<7> [291.477658] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [291.479015] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [291.479511] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [291.479917] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [291.480355] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [291.480765] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [291.481184] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [291.481589] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [291.482037] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [291.482446] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [291.482853] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [291.483277] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [291.483686] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [291.484104] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [291.484512] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [291.484914] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [291.485338] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [291.485742] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [291.486166] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [291.486575] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [291.486996] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [291.487409] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [291.487818] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [291.488237] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [291.488655] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [291.489093] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [291.489495] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [291.489898] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [291.490325] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [291.490732] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [291.491154] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [291.491566] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [291.491989] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [291.492396] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [291.492805] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [291.493242] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [291.493656] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [291.494073] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [291.494479] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [291.494896] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset

<7> [291.495317] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:59:pipe A] releasing DPLL 0

<7> [291.495791] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [291.496265] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [291.496661] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [291.497075] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [291.497474] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [291.497871] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [291.498292] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [291.498695] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [291.499219] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [291.499676] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz

<7> [291.500167] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [291.500568] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [291.500978] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [291.501374] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [modeset]

<7> [291.501765] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no

<7> [291.502172] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no

<7> [291.502563] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no

<7> [291.503206] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [291.505515] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [291.554319] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [291.713374] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 0

<7> [291.716733] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [291.729221] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power off

<7> [291.729743] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [291.730407] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [291.731110] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - short

<7> [291.732479] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [291.783056] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [291.783101] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [291.784036] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long

<7> [291.784457] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [291.784903] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [291.791316] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:110:DDI A/PHY A]

<7> [291.791669] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:59:pipe A]

<7> [291.792569] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A]

<7> [291.793435] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [291.794686] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [291.797344] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A]

<7> [291.798530] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B]

<7> [291.799654] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A]

<7> [291.801069] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B]

<7> [291.802209] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C]

<7> [291.803393] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C]

<7> [291.804757] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A]

<7> [291.806286] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B]

<7> [291.807654] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C]

<7> [291.808985] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1]

<7> [291.811458] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A]

<7> [291.815254] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:84:pipe B]

<7> [291.816788] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:109:pipe C]

<7> [291.913633] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [291.915348] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [291.917145] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [291.919152] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [291.923398] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [291.944457] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [292.039847] i915 0000:00:02.0: [drm:compute_baseline_pipe_bpp [i915]] [CONNECTOR:111:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [292.041159] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:110:DDI A/PHY A][CRTC:59:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [292.042402] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000

<7> [292.043753] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [292.045729] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:110:DDI A/PHY A] [CRTC:59:pipe A]

<7> [292.047117] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [292.048414] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [292.049715] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [292.051142] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [292.052699] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [292.054289] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [292.055463] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [292.056616] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [292.057634] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [292.058784] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [292.059958] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [292.061317] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [292.062814] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [292.064384] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [292.065877] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [292.067289] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [292.068698] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [292.070096] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [292.071127] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [292.072498] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [292.073883] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [292.075253] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [292.076666] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [292.078078] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [292.079332] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [292.080533] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [292.081706] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [292.082741] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [292.083775] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [292.084816] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [292.085808] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [292.086854] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [292.087943] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [292.089001] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [292.090010] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [292.091116] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [292.092127] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [292.093175] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [292.094165] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [292.095246] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset

<7> [292.096471] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [292.097504] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [292.098497] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [292.099511] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [292.100464] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [292.101512] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [292.102583] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [292.103767] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [292.105111] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [292.106202] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [292.107221] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [292.108275] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [292.109282] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [292.110318] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:59:pipe A] allocated DPLL 0

<7> [292.111355] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:59:pipe A] reserving DPLL 0

<7> [292.112430] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: yes [modeset]

<7> [292.113474] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [292.114954] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [292.116426] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [292.117851] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [292.119469] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [292.120935] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [292.122379] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [292.123800] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [292.125225] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [292.126645] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [292.128067] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [292.129494] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [292.130938] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [292.132351] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [292.133762] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [292.135177] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [292.136528] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [292.137961] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [292.139391] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [292.140811] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [292.142250] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [292.143680] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [292.145121] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [292.146556] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [292.147699] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [292.148654] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [292.149618] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [292.150579] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [292.151545] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [292.152499] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [292.153493] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [292.154460] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [292.155421] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [292.156310] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [292.157017] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [292.157699] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [292.158410] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [292.159123] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [292.159809] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [292.160525] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [292.161231] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [292.161939] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [292.162626] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [292.163342] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:112] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [292.164056] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [292.164745] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [292.165398] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no

<7> [292.165968] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no

<7> [292.177973] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [292.187819] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [292.188269] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [292.188557] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [292.190578] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [292.191389] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [292.193037] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A]

<7> [292.193408] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B]

<7> [292.193757] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A]

<7> [292.194131] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B]

<7> [292.194431] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C]

<7> [292.194678] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C]

<7> [292.194950] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A]

<7> [292.195292] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B]

<7> [292.195633] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C]

<7> [292.196260] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:59:pipe A]

<7> [292.196629] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [292.197169] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power on

<7> [292.197533] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (87 ms remaining)

<7> [292.289322] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [292.338996] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [292.341813] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power on

<7> [292.343262] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003

<7> [292.392080] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [292.393281] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long

<7> [292.394406] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [292.395623] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A]

<7> [292.545268] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [292.546541] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [292.548093] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [292.550723] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turning VDD on

<7> [292.552039] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b

<7> [292.560472] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [292.561797] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [292.564792] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [292.566267] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [292.567437] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [292.570648] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Clock recovery OK

<7> [292.571783] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [292.572851] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [292.576221] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [292.577623] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [292.578825] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [292.583721] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [292.584832] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [292.587008] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [292.590156] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [292.591224] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [292.594305] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 37

<7> [292.598077] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 389 us, max time under evasion is 250 us

<7> [292.606114] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [292.615330] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1]

<7> [292.616956] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A]

<7> [292.623014] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [292.623663] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [292.628576] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [292.630267] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [292.631419] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [292.632949] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [292.634197] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [292.634238] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [292.635556] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [292.640503] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [292.640537] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [292.644354] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [292.651068] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [292.652994] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [292.654327] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [292.655808] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [292.657142] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [292.657181] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [292.658548] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [292.665843] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [292.665919] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [292.775442] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [292.776330] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [292.789041] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [292.815561] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [292.815990] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [292.829160] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [292.929833] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [292.932588] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [292.940795] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [292.941517] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [292.942149] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [292.943467] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [292.944543] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [292.946345] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [292.947275] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [292.950259] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [292.951151] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [292.953388] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [293.043976] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [293.045860] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [293.046432] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [293.046946] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<6> [293.052123] Console: switching to colour dummy device 80x25

<7> [293.052445] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:112] is removed

<7> [293.052639] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [293.053777] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [293.054663] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [293.055394] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [293.056252] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [293.057101] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [293.058754] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [293.073000] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [293.073759] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [293.074928] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [293.077512] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [293.078338] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [293.079139] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [293.079814] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [293.080594] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [293.081748] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [293.082580] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [293.083418] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [293.084269] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [293.085175] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [293.086061] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [293.087071] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [293.087683] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [293.088309] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [293.089187] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [293.090040] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [293.090904] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [293.091713] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [293.092575] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [293.093313] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [293.093947] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [293.094660] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [293.095517] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [293.096352] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [293.097193] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [293.098047] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [293.098770] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [293.099413] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [293.100226] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [293.101067] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [293.101901] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [293.102711] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [293.103570] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [293.104269] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [293.104911] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [293.105724] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [293.106579] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [293.107423] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset

<7> [293.108272] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:59:pipe A] releasing DPLL 0

<7> [293.109211] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [293.109930] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [293.110706] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [293.111587] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [293.112419] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [293.113252] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [293.114092] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [modeset]

<7> [293.114790] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no

<7> [293.115444] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no

<7> [293.116273] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no

<7> [293.118168] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [293.321302] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 0

<7> [293.325302] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [293.344045] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power off

<7> [293.344442] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [293.345811] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - short

<7> [293.346734] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [293.348090] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [293.399232] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [293.400618] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long

<7> [293.400660] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [293.401931] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [293.403494] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:110:DDI A/PHY A]

<7> [293.405318] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A]

<7> [293.407881] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:59:pipe A]

<7> [293.411900] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [293.414960] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [293.420691] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A]

<7> [293.422237] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B]

<7> [293.423973] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A]

<7> [293.426111] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B]

<7> [293.427942] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C]

<7> [293.429807] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C]

<7> [293.431571] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A]

<7> [293.433252] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B]

<7> [293.434601] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C]

<7> [293.436209] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1]

<7> [293.439218] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A]

<7> [293.521372] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [293.568109] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:111:eDP-1] removing connector from sysfs

<7> [293.594218] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:119:DP-1] removing connector from sysfs

<7> [293.607990] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:128:HDMI-A-1] removing connector from sysfs

<7> [293.637571] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:134:DP-2] removing connector from sysfs

<7> [293.648578] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:140:HDMI-A-2] removing connector from sysfs

<7> [293.674068] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (228 ms remaining)

<7> [293.905420] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [293.945061] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<6> [294.637759] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS

<6> [294.638943] [IGT] i915_pm_rpm: exiting, ret=0

Results for igt@i915_pm_rpm@module-reload