Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.02 seconds
Igt-Version 
IGT-Version: 2.4-g3c05ee107 (x86_64) (Linux: 7.0.0-next-20260414-next-20260414-ge6efabc0afca+ x86_64)
Out 
Using IGT_SRANDOM=1776177849 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.024s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.024s)
Dmesg
<6> [510.182448] Console: switching to colour dummy device 80x25
<6> [510.183328] [IGT] kms_force_connector_basic: executing
<7> [510.351064] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [510.351991] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [510.352558] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [510.353856] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:77:VGA-1] force updated from 0 to 0 or reprobing
<7> [510.353873] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [510.353888] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [510.354320] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [510.354756] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [510.355344] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [510.355777] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [510.356351] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [510.356682] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [510.356691] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [510.356954] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [510.358269] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [510.358278] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [510.358570] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [510.358878] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<7> [510.358959] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [510.358968] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [510.359236] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [510.359537] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [510.360044] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [510.360301] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [510.360754] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [510.361013] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [510.361020] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [510.361279] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [510.362569] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [510.362578] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [510.362838] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [510.363099] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<7> [510.363204] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [510.363212] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [510.363498] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [510.363797] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [510.364222] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [510.364522] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [510.364934] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [510.365189] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [510.365196] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [510.365475] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [510.366764] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [510.366773] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [510.367030] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [510.367290] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<6> [510.368326] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [510.368896] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:77:VGA-1] force updated from 0 to 2 or reprobing
<7> [510.368909] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [510.368919] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] status updated from disconnected to connected
<7> [510.369085] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [510.369219] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [510.369130] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [510.369527] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [510.370079] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [510.370525] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [510.370552] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [510.370960] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [510.372729] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [510.372756] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [510.373296] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] probed modes:
<7> [510.373310] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [510.373323] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [510.373335] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [510.373346] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [510.373357] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [510.373477] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [510.373726] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [510.374134] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [510.374747] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [510.375142] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [510.375166] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [510.375593] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [510.377257] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [510.377283] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [510.377874] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] probed modes:
<7> [510.377888] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [510.377901] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [510.377912] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [510.377922] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [510.377933] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [510.378433] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:77:VGA-1] EDID override set
<7> [510.378488] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [510.378578] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:77:VGA-1] ELD monitor IGT
<7> [510.378587] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:77:VGA-1] ELD size 24, SAD count 0
<7> [510.378940] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [510.378963] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [510.378981] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] probed modes:
<7> [510.378991] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [510.379003] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [510.379013] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [510.379024] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [510.379035] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [510.379045] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [510.379365] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:77:VGA-1] EDID override set
<7> [510.379458] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [510.379539] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:77:VGA-1] ELD monitor IGT
<7> [510.379550] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:77:VGA-1] ELD size 24, SAD count 0
<7> [510.379559] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:77:VGA-1] EDID changed, epoch counter 58
<7> [510.379839] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [510.379858] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] probed modes:
<7> [510.379867] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [510.379878] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [510.379888] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [510.379899] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [510.379910] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [510.380182] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:77:VGA-1] EDID override reset
<7> [510.380223] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [510.380444] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [510.380847] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [510.381277] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [510.381692] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [510.381710] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [510.381972] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [510.383265] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [510.383281] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [510.383706] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [510.383724] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [510.383736] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] probed modes:
<7> [510.383744] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [510.383750] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [510.383756] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [510.383762] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [510.383769] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [510.384082] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:77:VGA-1] force updated from 2 to 0 or reprobing
<7> [510.384092] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [510.384100] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [510.384381] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [510.384729] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [510.385227] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [510.385518] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [510.385979] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [510.386237] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [510.386244] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [510.386571] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [510.387900] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [510.387908] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [510.388167] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [510.388481] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] status updated from connected to disconnected
<7> [510.388497] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<7> [510.388509] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:77:VGA-1] EDID changed, epoch counter 60
<7> [510.388611] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [510.388719] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [510.388793] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [510.388802] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [510.389086] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [510.389362] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [510.389841] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [510.390134] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [510.390552] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [510.390832] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [510.390840] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [510.391099] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [510.392430] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [510.392440] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [510.392704] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [510.392964] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<6> [510.394039] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [510.394778] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [510.395594] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:73:LVDS-1] force updated from 0 to 0 or reprobing
<7> [510.395612] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:LVDS-1]
<7> [510.395632] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:73:LVDS-1] ELD monitor
<7> [510.395644] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:73:LVDS-1] ELD size 20, SAD count 0
<7> [510.395744] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:LVDS-1] probed modes:
<7> [510.395751] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [510.395800] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:LVDS-1]
<7> [510.395809] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:73:LVDS-1] ELD monitor
<7> [510.395815] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:73:LVDS-1] ELD size 20, SAD count 0
<7> [510.395886] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:LVDS-1] probed modes:
<7> [510.395893] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [510.396062] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:73:LVDS-1] EDID override reset
<7> [510.396094] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:LVDS-1]
<7> [510.396102] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:73:LVDS-1] ELD monitor
<7> [510.396107] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:73:LVDS-1] ELD size 20, SAD count 0
<7> [510.396177] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:LVDS-1] probed modes:
<7> [510.396183] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [510.396524] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:77:VGA-1] force updated from 0 to 0 or reprobing
<7> [510.396536] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [510.396547] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [510.396915] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [510.397178] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [510.397675] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [510.397941] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [510.398360] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [510.398653] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [510.398666] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [510.398988] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [510.400305] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [510.400319] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [510.400687] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [510.401017] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<7> [510.401103] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [510.401112] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [510.401480] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [510.401794] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [510.402252] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [510.402651] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [510.403073] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [510.403330] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [510.403338] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [510.403637] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [510.404928] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [510.404936] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [510.405198] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [510.405488] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<7> [510.405726] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:77:VGA-1] EDID override reset
<7> [510.405763] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [510.405771] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [510.406047] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [510.406305] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [510.406799] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [510.407056] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [510.407484] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [510.407744] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [510.407751] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [510.408008] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [510.409237] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [510.409245] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [510.409549] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [510.409845] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<7> [510.410157] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:80:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [510.410167] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1]
<7> [510.410175] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:80:HDMI-A-1]
<7> [510.461942] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [510.478474] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [510.478497] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [510.478923] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [510.495463] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [510.495478] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [510.495890] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1] disconnected
<7> [510.496006] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1]
<7> [510.496019] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:80:HDMI-A-1]
<7> [510.548013] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [510.564442] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [510.564453] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [510.564707] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [510.580445] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [510.580456] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [510.580734] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1] disconnected
<7> [510.580960] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:80:HDMI-A-1] EDID override reset
<7> [510.580996] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1]
<7> [510.581004] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:80:HDMI-A-1]
<7> [510.633011] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [510.649443] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [510.649454] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [510.649705] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [510.665436] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [510.665446] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [510.665707] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1] disconnected
<7> [510.665939] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:88:DP-1] EDID override reset
<7> [510.665974] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:88:DP-1]
<7> [510.665982] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:88:DP-1]
<7> [510.670274] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:88:DP-1] disconnected
<7> [510.670823] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:93:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [510.670837] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:HDMI-A-2]
<7> [510.670850] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:93:HDMI-A-2]
<7> [510.671440] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [510.671846] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [510.672548] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [510.672991] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [510.673005] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [510.673435] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [510.675203] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [510.675219] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [510.675694] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:HDMI-A-2] disconnected
<7> [510.675832] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:HDMI-A-2]
<7> [510.675846] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:93:HDMI-A-2]
<7> [510.676448] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [510.676877] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [510.677488] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [510.677877] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [510.677889] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [510.678286] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [510.680006] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [510.680018] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [510.680446] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:HDMI-A-2] disconnected
<7> [510.680791] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:93:HDMI-A-2] EDID override reset
<7> [510.680844] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:HDMI-A-2]
<7> [510.680855] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:93:HDMI-A-2]
<7> [510.681467] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [510.681766] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [510.682180] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [510.682528] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [510.682540] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [510.682801] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [510.684031] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [510.684039] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [510.684301] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:HDMI-A-2] disconnected
<7> [510.684701] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:97:HDMI-A-3] force updated from 0 to 0 or reprobing
<7> [510.684713] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:97:HDMI-A-3]
<7> [510.684721] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:97:HDMI-A-3]
<7> [510.685155] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [510.685452] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [510.685916] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [510.686173] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [510.686180] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [510.686470] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [510.687776] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [510.687784] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [510.688047] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:97:HDMI-A-3] disconnected
<7> [510.688115] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:97:HDMI-A-3]
<7> [510.688123] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:97:HDMI-A-3]
<7> [510.688556] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [510.688949] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [510.689489] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [510.689770] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [510.689776] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [510.690029] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [510.691250] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [510.691258] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [510.691572] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:97:HDMI-A-3] disconnected
<7> [510.691813] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:97:HDMI-A-3] EDID override reset
<7> [510.691859] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:97:HDMI-A-3]
<7> [510.691871] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:97:HDMI-A-3]
<7> [510.692298] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [510.692578] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [510.693019] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [510.693275] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [510.693282] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [510.693583] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [510.694841] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [510.694849] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [510.695108] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:97:HDMI-A-3] disconnected
<7> [510.695312] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:101:DP-2] EDID override reset
<7> [510.695345] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:101:DP-2]
<7> [510.695353] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:101:DP-2]
<7> [510.699740] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:101:DP-2] disconnected
<7> [510.699941] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:105:DP-3] EDID override reset
<7> [510.699974] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:DP-3]
<7> [510.699982] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:105:DP-3]
<7> [510.704279] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:DP-3] disconnected
<6> [510.706823] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [510.707572] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [510.716596] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [510.716625] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [510.716843] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:LVDS-1]
<7> [510.716878] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:73:LVDS-1] ELD monitor
<7> [510.716894] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:73:LVDS-1] ELD size 20, SAD count 0
<7> [510.717098] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:LVDS-1] probed modes:
<7> [510.717115] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [510.717135] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [510.717152] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [510.718153] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [510.718473] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [510.718960] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [510.719217] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [510.719675] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [510.720614] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [510.720628] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [510.721052] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [510.722917] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [510.722931] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [510.723343] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [510.723790] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<7> [510.723808] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1]
<7> [510.723821] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:80:HDMI-A-1]
<7> [510.776069] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [510.792453] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [510.792475] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [510.792801] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [510.808445] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [510.808455] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [510.808713] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1] disconnected
<7> [510.808725] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:88:DP-1]
<7> [510.808733] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:88:DP-1]
<7> [510.813035] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:88:DP-1] disconnected
<7> [510.813055] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:HDMI-A-2]
<7> [510.813068] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:93:HDMI-A-2]
<7> [510.813755] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [510.814171] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [510.814775] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [510.815178] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [510.815190] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [510.815616] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [510.817367] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [510.817387] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [510.817814] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:HDMI-A-2] disconnected
<7> [510.817830] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:97:HDMI-A-3]
<7> [510.817843] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:97:HDMI-A-3]
<7> [510.818439] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [510.818831] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [510.819384] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [510.819717] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [510.819725] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [510.819982] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [510.821252] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [510.821261] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [510.821573] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:97:HDMI-A-3] disconnected
<7> [510.821587] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:101:DP-2]
<7> [510.821599] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:101:DP-2]
<7> [510.825946] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:101:DP-2] disconnected
<7> [510.825966] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:DP-3]
<7> [510.825977] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:105:DP-3]
<7> [510.830388] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:DP-3] disconnected
<7> [510.830437] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:73:LVDS-1] enabled? yes
<7> [510.830450] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:77:VGA-1] enabled? no
<7> [510.830459] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:80:HDMI-A-1] enabled? no
<7> [510.830468] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:88:DP-1] enabled? no
<7> [510.830477] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:93:HDMI-A-2] enabled? no
<7> [510.830485] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:97:HDMI-A-3] enabled? no
<7> [510.830499] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:101:DP-2] enabled? no
<7> [510.830504] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:105:DP-3] enabled? no
<7> [510.830551] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [510.830587] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:73:LVDS-1] found preferred mode: 1366x768
<7> [510.830597] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1366x768 config
<7> [510.830638] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:53:pipe A] desired mode 1366x768 set (0,0)
<7> [510.832909] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [510.850067] Console: switching to colour frame buffer device 170x48
Created at 2026-04-14 22:13:48