Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.02 seconds
Igt-Version 
IGT-Version: 2.4-gb52b42b0c (x86_64) (Linux: 7.0.0-rc7-next-20260410-next-20260410-g66672af7a095+ x86_64)
Out 
Using IGT_SRANDOM=1775834368 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.022s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.022s)
Dmesg
<6> [500.476692] Console: switching to colour dummy device 80x25
<6> [500.477735] [IGT] kms_force_connector_basic: executing
<7> [500.656237] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [500.657914] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [500.658463] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [500.659785] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:77:VGA-1] force updated from 0 to 0 or reprobing
<7> [500.659802] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [500.659817] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [500.660238] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [500.660671] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [500.661258] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [500.661716] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [500.662282] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [500.662619] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [500.662628] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [500.662892] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [500.664202] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [500.664212] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [500.664505] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [500.664825] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<7> [500.664907] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [500.664915] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [500.665184] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [500.665479] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [500.665942] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [500.666199] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [500.666651] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [500.666908] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [500.666915] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [500.667174] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [500.668455] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [500.668464] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [500.668724] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [500.669005] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<7> [500.669104] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [500.669111] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [500.669414] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [500.669702] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [500.670129] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [500.670428] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [500.670878] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [500.671135] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [500.671142] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [500.671442] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [500.672735] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [500.672743] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [500.673003] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [500.673263] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<6> [500.674247] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [500.674854] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:77:VGA-1] force updated from 0 to 2 or reprobing
<7> [500.674868] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [500.674876] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] status updated from disconnected to connected
<7> [500.675041] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [500.675086] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [500.675553] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [500.675973] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [500.676170] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [500.676599] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [500.676618] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [500.676888] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [500.678211] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [500.678229] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [500.678676] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] probed modes:
<7> [500.678686] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [500.678693] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [500.678700] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [500.678706] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [500.678712] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [500.678785] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [500.678975] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [500.679247] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [500.679715] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [500.679980] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [500.679996] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [500.680256] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [500.681574] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [500.681591] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [500.681950] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] probed modes:
<7> [500.681958] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [500.681964] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [500.681970] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [500.681976] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [500.681982] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [500.682297] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:77:VGA-1] EDID override set
<7> [500.682356] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [500.682441] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:77:VGA-1] ELD monitor IGT
<7> [500.682452] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:77:VGA-1] ELD size 24, SAD count 0
<7> [500.682668] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [500.682682] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [500.682694] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] probed modes:
<7> [500.682700] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [500.682706] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [500.682712] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [500.682718] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [500.682724] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [500.682730] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [500.682934] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:77:VGA-1] EDID override set
<7> [500.682974] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [500.683021] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:77:VGA-1] ELD monitor IGT
<7> [500.683026] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:77:VGA-1] ELD size 24, SAD count 0
<7> [500.683031] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:77:VGA-1] EDID changed, epoch counter 56
<7> [500.683263] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [500.683285] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] probed modes:
<7> [500.683294] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [500.683305] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [500.683316] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [500.683326] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [500.683346] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [500.683565] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:77:VGA-1] EDID override reset
<7> [500.683605] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [500.683798] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [500.684096] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [500.684580] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [500.684856] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [500.684874] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [500.685135] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [500.686479] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [500.686497] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [500.686859] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [500.686875] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [500.686889] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] probed modes:
<7> [500.686895] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [500.686902] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [500.686908] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [500.686914] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [500.686920] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [500.687210] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:77:VGA-1] force updated from 2 to 0 or reprobing
<7> [500.687219] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [500.687226] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [500.687602] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [500.687943] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [500.688495] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [500.688761] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [500.689175] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [500.689580] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [500.689588] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [500.689852] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [500.691121] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [500.691129] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [500.691445] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [500.691730] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] status updated from connected to disconnected
<7> [500.691742] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<7> [500.691750] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:77:VGA-1] EDID changed, epoch counter 58
<7> [500.691818] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [500.691909] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [500.691982] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [500.691990] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [500.692266] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [500.692590] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [500.693096] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [500.693398] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [500.693906] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [500.694185] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [500.694193] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [500.694492] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [500.695807] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [500.695816] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [500.696125] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [500.696434] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<6> [500.697381] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [500.698069] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [500.698871] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:73:LVDS-1] force updated from 0 to 0 or reprobing
<7> [500.698883] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:LVDS-1]
<7> [500.698898] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:73:LVDS-1] ELD monitor
<7> [500.698905] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:73:LVDS-1] ELD size 20, SAD count 0
<7> [500.698997] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:LVDS-1] probed modes:
<7> [500.699004] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [500.699045] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:LVDS-1]
<7> [500.699054] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:73:LVDS-1] ELD monitor
<7> [500.699059] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:73:LVDS-1] ELD size 20, SAD count 0
<7> [500.699132] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:LVDS-1] probed modes:
<7> [500.699138] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [500.699306] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:73:LVDS-1] EDID override reset
<7> [500.699363] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:LVDS-1]
<7> [500.699377] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:73:LVDS-1] ELD monitor
<7> [500.699386] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:73:LVDS-1] ELD size 20, SAD count 0
<7> [500.699496] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:LVDS-1] probed modes:
<7> [500.699505] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [500.699902] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:77:VGA-1] force updated from 0 to 0 or reprobing
<7> [500.699911] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [500.699918] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [500.700228] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [500.700542] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [500.701057] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [500.701319] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [500.701790] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [500.702060] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [500.702069] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [500.702351] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [500.704000] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [500.704013] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [500.704305] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [500.704608] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<7> [500.704711] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [500.704724] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [500.705032] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [500.705293] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [500.705811] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [500.706229] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [500.706847] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [500.707115] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [500.707122] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [500.707454] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [500.708696] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [500.708703] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [500.708989] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [500.709251] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<7> [500.709544] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:77:VGA-1] EDID override reset
<7> [500.709579] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [500.709587] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [500.709865] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [500.710126] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [500.710610] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [500.710872] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [500.711285] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [500.711571] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [500.711581] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [500.711868] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [500.713092] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [500.713100] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [500.713397] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [500.713677] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<7> [500.714004] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:80:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [500.714014] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1]
<7> [500.714021] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:80:HDMI-A-1]
<7> [500.765878] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [500.781371] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [500.781383] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [500.781657] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [500.797427] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [500.797457] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [500.798405] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1] disconnected
<7> [500.798556] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1]
<7> [500.798566] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:80:HDMI-A-1]
<7> [500.850401] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [500.866368] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [500.866379] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [500.866632] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [500.882369] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [500.882379] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [500.882644] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1] disconnected
<7> [500.882877] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:80:HDMI-A-1] EDID override reset
<7> [500.882910] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1]
<7> [500.882917] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:80:HDMI-A-1]
<7> [500.934921] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [500.951363] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [500.951374] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [500.951644] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [500.967368] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [500.967377] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [500.967634] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1] disconnected
<7> [500.967876] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:88:DP-1] EDID override reset
<7> [500.967909] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:88:DP-1]
<7> [500.967917] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:88:DP-1]
<7> [500.972191] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:88:DP-1] disconnected
<7> [500.972669] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:93:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [500.972680] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:HDMI-A-2]
<7> [500.972687] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:93:HDMI-A-2]
<7> [500.973165] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [500.973609] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [500.974172] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [500.974612] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [500.974624] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [500.975017] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [500.976753] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [500.976764] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [500.977149] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:HDMI-A-2] disconnected
<7> [500.977254] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:HDMI-A-2]
<7> [500.977267] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:93:HDMI-A-2]
<7> [500.977918] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [500.978391] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [500.978962] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [500.979395] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [500.979407] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [500.979802] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [500.981454] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [500.981468] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [500.981859] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:HDMI-A-2] disconnected
<7> [500.982189] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:93:HDMI-A-2] EDID override reset
<7> [500.982240] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:HDMI-A-2]
<7> [500.982252] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:93:HDMI-A-2]
<7> [500.982880] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [500.983286] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [500.983869] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [500.984270] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [500.984279] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [500.984705] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [500.986348] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [500.986359] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [500.986753] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:HDMI-A-2] disconnected
<7> [500.987239] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:97:HDMI-A-3] force updated from 0 to 0 or reprobing
<7> [500.987252] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:97:HDMI-A-3]
<7> [500.987264] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:97:HDMI-A-3]
<7> [500.987957] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [500.988376] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [500.988932] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [500.989350] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [500.989361] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [500.989744] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [500.991465] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [500.991477] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [500.991861] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:97:HDMI-A-3] disconnected
<7> [500.991947] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:97:HDMI-A-3]
<7> [500.991958] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:97:HDMI-A-3]
<7> [500.992558] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [500.992935] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [500.993500] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [500.993886] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [500.993896] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [500.994266] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [500.995942] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [500.995953] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [500.996362] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:97:HDMI-A-3] disconnected
<7> [500.996675] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:97:HDMI-A-3] EDID override reset
<7> [500.996727] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:97:HDMI-A-3]
<7> [500.996738] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:97:HDMI-A-3]
<7> [500.997366] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [500.997754] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [500.998296] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [500.998708] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [500.998718] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [500.999102] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [501.000770] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [501.000782] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [501.001161] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:97:HDMI-A-3] disconnected
<7> [501.001506] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:101:DP-2] EDID override reset
<7> [501.001567] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:101:DP-2]
<7> [501.001578] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:101:DP-2]
<7> [501.006014] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:101:DP-2] disconnected
<7> [501.006340] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:105:DP-3] EDID override reset
<7> [501.006395] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:DP-3]
<7> [501.006407] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:105:DP-3]
<7> [501.010832] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:DP-3] disconnected
<6> [501.013392] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [501.014274] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [501.028188] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [501.028202] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [501.028303] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:LVDS-1]
<7> [501.028525] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:73:LVDS-1] ELD monitor
<7> [501.028538] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:73:LVDS-1] ELD size 20, SAD count 0
<7> [501.028691] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:LVDS-1] probed modes:
<7> [501.028702] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [501.028716] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [501.028728] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [501.029184] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [501.029770] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [501.030780] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [501.031172] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [501.031853] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [501.032261] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [501.032273] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [501.032700] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [501.034454] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [501.034468] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [501.034869] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [501.035271] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<7> [501.035295] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1]
<7> [501.035307] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:80:HDMI-A-1]
<7> [501.087387] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [501.103356] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [501.103368] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [501.103640] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [501.119378] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [501.119389] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [501.119685] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1] disconnected
<7> [501.119697] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:88:DP-1]
<7> [501.119706] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:88:DP-1]
<7> [501.124014] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:88:DP-1] disconnected
<7> [501.124032] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:HDMI-A-2]
<7> [501.124044] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:93:HDMI-A-2]
<7> [501.124632] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [501.125019] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [501.125635] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [501.125912] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [501.125921] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [501.126176] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [501.127491] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [501.127499] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [501.127790] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:HDMI-A-2] disconnected
<7> [501.127800] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:97:HDMI-A-3]
<7> [501.127808] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:97:HDMI-A-3]
<7> [501.128243] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [501.128680] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [501.129303] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [501.129774] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [501.129788] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [501.130189] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [501.131744] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [501.131755] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [501.132053] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:97:HDMI-A-3] disconnected
<7> [501.132065] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:101:DP-2]
<7> [501.132073] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:101:DP-2]
<7> [501.136497] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:101:DP-2] disconnected
<7> [501.136522] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:DP-3]
<7> [501.136536] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:105:DP-3]
<7> [501.141070] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:DP-3] disconnected
<7> [501.141088] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:73:LVDS-1] enabled? yes
<7> [501.141100] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:77:VGA-1] enabled? no
<7> [501.141108] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:80:HDMI-A-1] enabled? no
<7> [501.141117] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:88:DP-1] enabled? no
<7> [501.141125] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:93:HDMI-A-2] enabled? no
<7> [501.141133] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:97:HDMI-A-3] enabled? no
<7> [501.141141] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:101:DP-2] enabled? no
<7> [501.141149] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:105:DP-3] enabled? no
<7> [501.141185] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [501.141221] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:73:LVDS-1] found preferred mode: 1366x768
<7> [501.141230] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1366x768 config
<7> [501.141273] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:53:pipe A] desired mode 1366x768 set (0,0)
<7> [501.144736] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [501.162079] Console: switching to colour frame buffer device 170x48
Created at 2026-04-11 15:25:16