igt@i915_pm_rpm@module-reload on fi-skl-6600u@next-20260226 Test details

Detail	Value
Duration	12.80 seconds
Igt-Version	IGT-Version: 2.3-g53a8844b8 (x86_64) (Linux: 7.0.0-rc1-next-20260226-next-20260226-g7d6661873f6b+ x86_64)
Out	Using IGT_SRANDOM=1772116880 for randomisation Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff88813b665820 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] hsw_get_pipe_config+0x1b9/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x740 [i915] intel_atomic_commit_tail+0x12e0/0x1d70 [i915] intel_atomic_commit+0x2e8/0x330 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x548/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 __x64_sys_ioctl+0xa5/0x100 Starting subtest: module-reload Reloading i915 with disable_display=1 mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 2 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff8881313f1820 has 1/2 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get+0x1a/0x30 [i915] intel_display_rpm_get+0x1f/0x30 [i915] intel_display_power_get+0x22/0x70 [i915] intel_audio_component_get_power+0x2f/0x180 [i915] snd_hdac_display_power+0x8a/0x1c0 [snd_hda_core] azx_probe_continue+0x24f/0xa30 [snd_hda_intel] azx_probe_work+0x15/0x20 [snd_hda_intel] process_one_work+0x22e/0x740 worker_thread+0x1e8/0x3d0 kthread+0x10d/0x150 ret_from_fork+0x3d4/0x480 ret_from_fork_asm+0x1a/0x30 ref_tracker: intel_runtime_pm@ffff8881313f1820 has 1/2 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get+0x1a/0x30 [i915] intel_display_rpm_get+0x1f/0x30 [i915] intel_display_power_get+0x22/0x70 [i915] intel_pps_vdd_on_unlocked+0xbd/0x360 [i915] intel_dp_aux_xfer+0x12b/0x9b0 [i915] intel_dp_aux_transfer+0xd4/0x330 [i915] drm_dp_dpcd_access+0xc3/0x160 [drm_display_helper] drm_dp_dpcd_read+0x87/0x160 [drm_display_helper] intel_alpm_init+0x39/0x90 [i915] intel_dp_init_connector+0x9c4/0x14e0 [i915] intel_ddi_init+0xd03/0x1220 [i915] intel_bios_for_each_encoder+0x39/0x60 [i915] intel_setup_outputs+0x1f4/0xc20 [i915] intel_display_driver_probe_nogem+0x110/0x1e0 [i915] Reloading i915 with mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff88811b71d820 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] hsw_get_pipe_config+0x1b9/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x740 [i915] intel_atomic_commit_tail+0x12e0/0x1d70 [i915] intel_atomic_commit+0x2e8/0x330 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x548/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 __x64_sys_ioctl+0xa5/0x100 Subtest module-reload: SUCCESS (12.801s)
Err	Starting subtest: module-reload Subtest module-reload: SUCCESS (12.801s)
Dmesg	<6> [275.026748] Console: switching to colour dummy device 80x25 <6> [275.028027] [IGT] i915_pm_rpm: executing <7> [275.032256] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [275.033180] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [275.033197] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [275.033964] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [275.034341] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [275.034711] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [275.035125] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [275.035138] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [275.035146] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [275.035186] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no <7> [275.035569] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [275.035919] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [275.038118] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes: <7> [275.038132] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [275.038144] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [275.038328] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [275.038339] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [275.042891] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [275.043037] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [275.043050] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [275.044012] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [275.044405] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [275.044977] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [275.045397] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [275.045409] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [275.045776] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [275.049050] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [275.049061] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [275.049494] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [275.049643] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [275.049655] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [275.054154] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [275.054280] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [275.054291] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [275.054963] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [275.055339] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [275.055906] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [275.056298] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [275.056317] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [275.056683] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [275.059913] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [275.059924] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [275.060334] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [275.069311] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [275.069324] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [275.073758] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [275.074390] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [275.074399] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [275.074962] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [275.075335] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [275.075889] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [275.076280] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [275.076290] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [275.076650] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [275.079892] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [275.079904] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [275.080315] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [275.081309] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [275.081322] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [275.085813] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [275.086436] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [275.086445] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [275.086996] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [275.087374] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [275.087950] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [275.088347] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [275.088358] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [275.088667] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [275.091723] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [275.091733] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [275.092002] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [275.092676] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [275.092690] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [275.093112] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [275.093470] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [275.093843] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [275.094247] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [275.094259] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [275.094267] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [275.094306] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no <7> [275.094618] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [275.094919] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [275.095926] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes: <7> [275.095936] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [275.095945] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [275.095979] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [275.095987] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [275.100351] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [275.100396] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [275.100407] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [275.101066] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [275.101416] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [275.101941] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [275.102312] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [275.102322] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [275.102660] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [275.105874] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [275.105885] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [275.106276] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [275.106330] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [275.106341] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [275.110778] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [275.110819] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [275.110830] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [275.111452] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [275.111813] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [275.112330] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [275.112713] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [275.112723] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [275.113061] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [275.116258] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [275.116269] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [275.116676] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [275.117401] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:144] <7> [275.215843] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [276.164072] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:58:pipe A] <7> [276.164838] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [276.166192] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [276.166438] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [276.166717] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [276.167105] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [276.167517] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [276.167909] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [276.168302] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [276.168738] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [276.169133] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [276.169539] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [276.169931] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [276.170324] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [276.170734] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [276.171131] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [276.171538] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [276.171936] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [276.172336] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [276.172748] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [276.173141] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [276.173551] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [276.173948] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [276.174347] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [276.174755] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [276.175163] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [276.175580] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [276.175978] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [276.176371] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [276.176777] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [276.177180] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [276.177589] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [276.177980] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [276.178372] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [276.178775] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [276.179167] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [276.179573] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [276.179972] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [276.180378] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [276.180792] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [276.181187] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset <7> [276.181599] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:58:pipe A] releasing DPLL 0 <7> [276.182052] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [276.182489] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [276.182880] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [276.183275] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [276.183678] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [276.184078] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [276.184474] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [276.184949] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [276.185394] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz <7> [276.185839] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [276.186214] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [276.186606] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [276.186989] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [modeset] <7> [276.187374] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no <7> [276.187773] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [276.188151] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no <7> [276.188775] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [276.190665] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [276.398873] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 0 <7> [276.400798] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [276.421811] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power off <7> [276.422338] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [276.422933] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power off time <7> [276.423707] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - short <7> [276.424366] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [276.473159] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [276.474736] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [276.475140] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [276.476504] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [276.476480] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long <7> [276.476917] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:58:pipe A] <7> [276.477808] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [276.478801] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [276.479182] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [276.480215] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [276.482936] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A] <7> [276.483966] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B] <7> [276.484868] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A] <7> [276.485948] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B] <7> [276.486810] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C] <7> [276.488016] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C] <7> [276.488925] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A] <7> [276.489868] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B] <7> [276.490737] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C] <7> [276.491778] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1] <7> [276.494344] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [276.497912] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:83:pipe B] <7> [276.499245] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:108:pipe C] <7> [276.599015] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [276.600412] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [276.601228] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [276.603054] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [276.606752] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [276.626595] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [276.713731] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:110:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [276.715020] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:109:DDI A/PHY A][CRTC:58:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [276.716184] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000 <7> [276.717977] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [276.719550] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:109:DDI A/PHY A] [CRTC:58:pipe A] <7> [276.722134] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [276.723680] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [276.725127] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [276.726182] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [276.727686] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [276.728710] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [276.730026] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [276.731055] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [276.732299] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [276.733376] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [276.734963] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [276.736175] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [276.737405] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [276.738419] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [276.739680] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [276.740689] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [276.741903] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [276.743010] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [276.744312] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [276.745685] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [276.746968] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [276.748004] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [276.749210] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [276.750273] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [276.751546] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [276.752618] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [276.753872] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [276.754887] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [276.756091] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [276.757120] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [276.758648] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [276.760163] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [276.761601] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [276.763047] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [276.764592] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [276.765597] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [276.767093] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [276.768668] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [276.770209] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [276.771794] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset <7> [276.773782] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [276.775053] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [276.776066] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [276.777528] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [276.779038] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [276.780539] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [276.781922] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [276.783687] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [276.785199] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [276.786249] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [276.787313] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [276.788381] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [276.789505] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:58:pipe A] allocated DPLL 0 <7> [276.790537] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:58:pipe A] reserving DPLL 0 <7> [276.791826] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: yes [modeset] <7> [276.792846] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [276.794234] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [276.795538] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [276.796774] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [276.797835] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [276.799041] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [276.800073] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [276.801314] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [276.802323] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [276.803328] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [276.803996] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [276.804961] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [276.805675] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [276.806490] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [276.807094] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [276.807749] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [276.808534] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [276.809125] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [276.809793] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [276.810580] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [276.811173] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [276.812001] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [276.812536] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [276.812971] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [276.813406] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [276.813901] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [276.814381] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [276.814862] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [276.815333] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [276.815812] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [276.816284] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [276.816778] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [276.817364] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [276.817925] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [276.818396] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [276.818877] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [276.819340] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [276.819806] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [276.820269] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [276.820751] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [276.821174] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [276.821560] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [276.821930] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [276.822460] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:111] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [276.822838] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [276.823225] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [276.823618] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [276.823992] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no <7> [276.835526] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [276.845328] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [276.846000] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [276.847491] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [276.848376] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [276.849811] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [276.850741] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A] <7> [276.851126] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B] <7> [276.851507] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A] <7> [276.851875] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B] <7> [276.852240] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C] <7> [276.852633] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C] <7> [276.853013] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A] <7> [276.853388] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B] <7> [276.853787] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C] <7> [276.854461] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:58:pipe A] <7> [276.854855] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [276.855589] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power on <7> [276.856096] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (119 ms remaining) <7> [276.982842] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [277.064484] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [277.065637] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power on <7> [277.066765] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003 <7> [277.115984] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [277.117093] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long <7> [277.118109] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [277.119205] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [277.270995] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [277.272310] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [277.273657] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [277.277063] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD on <7> [277.278715] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b <7> [277.285949] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [277.287218] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [277.291036] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [277.292561] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [277.294109] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [277.298173] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Clock recovery OK <7> [277.299691] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [277.301217] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [277.305569] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [277.307092] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [277.308633] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [277.313303] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [277.314825] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [277.317637] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [277.321115] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [277.322507] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [277.324146] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 37 <7> [277.336880] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [277.343512] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1] <7> [277.345350] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [277.350845] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [277.350857] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [277.357632] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <6> [277.359203] [IGT] i915_pm_rpm: starting subtest module-reload <7> [277.359410] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [277.360855] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [277.363197] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [277.365378] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [277.366032] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [277.368070] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [277.374346] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [277.374395] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [277.376879] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [277.383532] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [277.385810] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [277.387291] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [277.390034] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [277.392129] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [277.392159] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [277.393680] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [277.399099] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [277.399132] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [277.500008] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [277.500806] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [277.513617] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [277.539032] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [277.539414] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [277.551579] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [277.579219] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [277.581622] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [277.598888] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [277.599547] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [277.600059] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [277.600606] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [277.601102] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [277.607534] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [277.608055] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [277.608812] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [277.609309] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [277.619485] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [277.716574] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [277.717491] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [277.718098] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [277.718734] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [277.720913] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:111] is removed <7> [277.721099] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [277.721887] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [277.722593] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [277.723181] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [277.724067] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [277.725383] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [277.737109] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [277.738524] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [277.739085] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [277.739520] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [277.740113] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [277.740744] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [277.741343] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [277.741966] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [277.742582] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [277.743173] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [277.743794] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [277.744388] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [277.745013] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [277.745626] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [277.746219] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [277.746851] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [277.747464] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [277.748057] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [277.748699] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [277.749295] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [277.749906] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [277.750565] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [277.751160] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [277.751766] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [277.752362] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [277.752970] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [277.753635] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [277.754224] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [277.754834] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [277.755444] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [277.756037] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [277.756638] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [277.757229] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [277.757834] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [277.758433] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [277.759027] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [277.759639] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [277.760232] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [277.760852] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [277.761463] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [277.762056] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset <7> [277.762671] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:58:pipe A] releasing DPLL 0 <7> [277.763350] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [277.764031] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [277.764770] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [277.765361] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [277.765957] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [277.766539] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [277.767091] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [modeset] <7> [277.767699] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no <7> [277.768286] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [277.768904] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no <7> [277.770291] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [277.974724] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 0 <7> [277.976931] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [277.991100] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power off <7> [277.991578] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [277.992234] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power off time <7> [277.992575] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - short <7> [277.993253] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [278.044993] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [278.045231] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [278.046156] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long <7> [278.047561] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [278.049573] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [278.050952] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [278.051947] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:58:pipe A] <7> [278.054219] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [278.056198] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [278.060248] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A] <7> [278.062208] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B] <7> [278.064040] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A] <7> [278.065839] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B] <7> [278.067592] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C] <7> [278.069182] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C] <7> [278.071021] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A] <7> [278.072837] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B] <7> [278.074565] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C] <7> [278.076321] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1] <7> [278.079525] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [278.154994] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [278.199181] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:110:eDP-1] removing connector from sysfs <7> [278.232701] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:118:DP-1] removing connector from sysfs <7> [278.241730] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:127:HDMI-A-1] removing connector from sysfs <7> [278.254229] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:133:DP-2] removing connector from sysfs <7> [278.257750] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:139:HDMI-A-2] removing connector from sysfs <7> [278.283543] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (263 ms remaining) <7> [278.551043] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [278.572630] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [279.224256] [IGT] Reloading i915 w/o display <5> [280.154840] Setting dangerous option force_probe - tainting kernel <6> [280.169400] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0 <7> [280.171342] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K <7> [280.171798] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [280.172087] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH <7> [280.172366] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [280.172724] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [280.173370] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [280.173817] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [280.175179] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [280.175576] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [280.175940] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [280.176305] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [280.176320] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [280.177274] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [280.177336] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047 <7> [280.177768] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [280.178167] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7716 MiB [mem 0x00000000-0x1e244bfff], io: n/a <7> [280.178527] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a <7> [280.179508] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018 <7> [280.180033] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [280.180473] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [280.180890] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [280.181303] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [280.190470] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [280.190772] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [280.191035] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [280.191299] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [280.191613] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [280.192056] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [280.192508] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no <7> [280.192945] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [280.193379] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [280.193826] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no <7> [280.194261] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes <7> [280.194712] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no <7> [280.195145] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3 <7> [280.195589] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [280.196019] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0 <7> [280.196462] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7> [280.197995] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [280.198318] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203 <7> [280.198646] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [280.198955] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [280.199236] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [280.199673] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [280.199957] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 850) <7> [280.200235] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [280.200550] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [280.200850] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [280.201143] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [280.201636] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136) <7> [280.201925] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [280.202195] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [280.202487] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [280.202790] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [280.203066] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [280.203342] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [280.203772] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [280.204106] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [280.204385] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [280.204691] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [280.204999] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [280.205256] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [280.205665] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [280.205952] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [280.206305] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [280.206604] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [280.206924] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [280.207235] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [280.207626] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [280.207882] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [280.208234] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [280.208511] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [280.208790] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [280.209056] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [280.209365] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [280.210188] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [280.210506] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [280.210794] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [280.211819] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <7> [280.213261] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [280.213654] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [280.213919] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [280.214092] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [280.214583] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [280.214799] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <6> [280.215451] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <7> [280.215282] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [280.215636] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7> [280.215904] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec) <7> [280.216171] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec) <7> [280.216460] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec) <7> [280.216751] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec) <7> [280.217071] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec) <7> [280.217337] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec) <7> [280.217664] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec) <7> [280.217946] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec) <7> [280.218212] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec) <7> [280.218526] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec) <7> [280.218864] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec) <7> [280.219140] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec) <7> [280.219503] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec) <7> [280.219906] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec) <7> [280.220306] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec) <7> [280.225873] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available. <7> [280.230031] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [280.230540] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:109:DDI A/PHY A] Using AUX CH A (VBT) <7> [280.231008] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:109:DDI A/PHY A] <7> [280.236729] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [280.237166] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [280.237707] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [280.238130] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [280.238584] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [280.239020] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [280.239436] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP <7> [280.239834] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [280.240249] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0 <7> [280.240995] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0 <7> [280.241550] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:109:DDI A/PHY A] initial power sequencer: PPS 0 <7> [280.241999] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [280.242390] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [280.242871] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [280.243266] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [280.243668] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [280.244112] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [280.244803] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD on <7> [280.245243] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [280.245692] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [280.255524] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [280.255886] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [280.256179] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [280.466945] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [280.468029] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [280.470593] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00 <7> [280.476603] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1 <7> [280.497960] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [280.498016] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [280.498051] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [280.498671] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:110:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [280.500645] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:110:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [280.502305] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:110:eDP-1] DRRS type: static <7> [280.504667] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:110:eDP-1] Using native PCH PWM for backlight control <7> [280.506675] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:110:eDP-1] backlight initialized, disabled, brightness 0/937 <7> [280.509329] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [280.511099] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [280.512693] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [280.514346] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [280.516344] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [280.518677] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [280.523557] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:117:DDI B/PHY B] Using AUX CH B (VBT) <7> [280.526144] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:117:DDI B/PHY B] <7> [280.533487] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [280.536094] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:117:DDI B/PHY B] <7> [280.538370] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:117:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [280.543814] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:132:DDI C/PHY C] Using AUX CH C (VBT) <7> [280.546576] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:132:DDI C/PHY C] <7> [280.551932] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [280.553974] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:132:DDI C/PHY C] <7> [280.555545] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:132:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [280.561607] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled <6> [280.563991] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem <7> [280.565871] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:58:pipe A] hw state readout: disabled <7> [280.567911] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe B] hw state readout: disabled <7> [280.569714] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:108:pipe C] hw state readout: disabled <7> [280.571189] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] hw state readout: disabled, pipe A <7> [280.572670] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A <7> [280.574198] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:cursor A] hw state readout: disabled, pipe A <7> [280.575219] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 1B] hw state readout: disabled, pipe B <7> [280.576516] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] hw state readout: disabled, pipe B <7> [280.577559] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor B] hw state readout: disabled, pipe B <7> [280.578587] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1C] hw state readout: disabled, pipe C <7> [280.579623] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2C] hw state readout: disabled, pipe C <7> [280.580472] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:cursor C] hw state readout: disabled, pipe C <7> [280.581271] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DDI A/PHY A] hw state readout: disabled, pipe A <7> [280.582322] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:117:DDI B/PHY B] hw state readout: disabled, pipe A <7> [280.583264] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST A] hw state readout: disabled, pipe A <7> [280.584199] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST B] hw state readout: disabled, pipe B <7> [280.585124] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST C] hw state readout: disabled, pipe C <7> [280.585674] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:132:DDI C/PHY C] hw state readout: disabled, pipe A <7> [280.586316] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:134:DP-MST A] hw state readout: disabled, pipe A <7> [280.587034] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST B] hw state readout: disabled, pipe B <7> [280.587739] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:136:DP-MST C] hw state readout: disabled, pipe C <7> [280.588518] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [280.589293] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [280.589960] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [280.590586] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [280.591548] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:110:eDP-1] hw state readout: disabled <7> [280.592387] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:118:DP-1] hw state readout: disabled <7> [280.593233] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:127:HDMI-A-1] hw state readout: disabled <7> [280.594031] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:133:DP-2] hw state readout: disabled <7> [280.594529] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:139:HDMI-A-2] hw state readout: disabled <7> [280.595001] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] min_cdclk 0 kHz <7> [280.595590] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] min_cdclk 0 kHz <7> [280.596144] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:cursor A] min_cdclk 0 kHz <7> [280.596745] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:58:pipe A] min_cdclk 0 kHz <7> [280.597265] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 1B] min_cdclk 0 kHz <7> [280.597665] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] min_cdclk 0 kHz <7> [280.598128] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor B] min_cdclk 0 kHz <7> [280.598704] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe B] min_cdclk 0 kHz <7> [280.599252] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1C] min_cdclk 0 kHz <7> [280.599849] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2C] min_cdclk 0 kHz <7> [280.600432] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:cursor C] min_cdclk 0 kHz <7> [280.600836] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:108:pipe C] min_cdclk 0 kHz <7> [280.601198] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:58:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [280.601761] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:83:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [280.602303] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:108:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [280.603239] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [setup_hw_state] <7> [280.603727] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:83:pipe B] enable: no [setup_hw_state] <7> [280.604048] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:108:pipe C] enable: no [setup_hw_state] <7> [280.604351] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [280.604898] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [280.605292] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [280.605724] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [280.606189] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7> [280.609490] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [280.609825] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [280.610190] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0 <7> [280.631248] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [280.631525] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [280.631725] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [280.631922] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [280.632138] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 0: start 0x8 <7> [280.632426] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 1: start 0x108 <7> [280.632823] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 2: start 0x208 <7> [280.633218] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 3: start 0x308 <7> [280.633663] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 4: start 0x3c8 <7> [280.634066] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 0: start 0x8 <7> [280.634402] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 1: start 0x108 <7> [280.634716] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 2: start 0x208 <7> [280.635001] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 3: start 0x308 <7> [280.635354] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 4: start 0x3c8 <7> [280.635750] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 0: start 0x8 <7> [280.636135] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 1: start 0x108 <7> [280.636537] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 2: start 0x208 <7> [280.636927] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 3: start 0x308 <7> [280.637195] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 4: start 0x3c8 <7> [280.637712] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [fastset] <7> [280.638107] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:83:pipe B] enable: no [fastset] <7> [280.638507] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:108:pipe C] enable: no [fastset] <7> [280.639173] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [280.639978] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:83:pipe B] <7> [280.640429] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:108:pipe C] <7> [280.640903] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [280.646872] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:110:eDP-1] adding connector to sysfs <7> [280.648277] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:110:eDP-1] backlight device intel_backlight registered <7> [280.648798] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:110:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [280.649856] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [280.652489] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:110:eDP-1] generating connector hotplug event <7> [280.652652] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:118:DP-1] adding connector to sysfs <7> [280.654297] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [280.661693] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:118:DP-1] generating connector hotplug event <7> [280.661858] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:127:HDMI-A-1] adding connector to sysfs <7> [280.663155] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:127:HDMI-A-1] generating connector hotplug event <7> [280.663307] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:133:DP-2] adding connector to sysfs <7> [280.667034] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [280.672069] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:133:DP-2] generating connector hotplug event <7> [280.672203] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:139:HDMI-A-2] adding connector to sysfs <7> [280.673433] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:139:HDMI-A-2] generating connector hotplug event <6> [280.673570] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7> [280.680259] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [280.715784] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [280.726000] input: Video Bus as /devices/pci0000:00/LNXVIDEO:00/input/input35 <7> [280.728206] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [280.733687] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [280.734160] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:118:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [280.734636] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [280.735039] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:127:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [280.735514] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [280.735911] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:133:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [280.736326] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [280.737247] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:58:pipe A] not active, skipping <7> [280.737719] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:83:pipe B] not active, skipping <7> [280.738139] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:108:pipe C] not active, skipping <7> [280.738571] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config <7> [280.739291] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [280.740307] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [280.740921] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:139:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [280.741392] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [280.743191] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [280.743211] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [280.743701] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] status updated from unknown to disconnected <7> [280.743723] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] disconnected <7> [280.743734] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:110:eDP-1] EDID changed, epoch counter 2 <7> [280.743766] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [280.743778] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [280.744194] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [280.744208] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [280.744220] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [280.744662] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [280.744807] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [280.744822] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [280.744834] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [280.745238] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [280.745252] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [280.745263] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [280.745693] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [280.745705] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [280.745715] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? no <7> [280.745723] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no <7> [280.745733] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no <7> [280.745742] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no <7> [280.745751] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no <7> [280.745812] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [280.745833] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [280.745953] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [280.745968] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [280.749251] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9 <7> [280.749836] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [280.750612] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [280.750636] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [280.751059] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] disconnected <7> [280.751084] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [280.751097] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [280.751624] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [280.751639] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [280.751651] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [280.752044] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [280.752059] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [280.752071] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [280.752516] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [280.752530] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [280.752542] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [280.752946] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [280.752959] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [280.752980] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? no <7> [280.752990] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no <7> [280.753000] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no <7> [280.753010] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no <7> [280.753019] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no <7> [280.753332] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [280.753372] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [280.753935] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [280.753969] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [280.754061] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [280.754741] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [280.754883] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [280.754899] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [280.755339] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] disconnected <7> [280.755355] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [280.755367] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [280.755795] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [280.755809] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [280.755821] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [280.756222] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [280.756235] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [280.756247] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [280.756692] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [280.756705] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [280.756717] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [280.757124] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [280.757136] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [280.757146] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? no <7> [280.757155] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no <7> [280.757164] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no <7> [280.757173] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no <7> [280.757182] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no <7> [280.757242] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [280.757262] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [280.757367] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [280.757395] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [280.757517] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0 <7> [280.757937] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7> [280.758355] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no <7> [280.758813] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no <7> [280.759218] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7> [280.759670] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7> [280.760104] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no <7> [280.760704] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [280.760730] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7> [280.761165] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7> [280.761616] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7> [280.762033] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7> [280.762475] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7> [280.762890] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7> [280.763299] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7> [280.763741] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes <7> [280.764163] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7> [280.764590] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7> [280.765011] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7> [280.765482] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7> [280.765911] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no <7> [280.766341] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz <7> [280.767915] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7> [280.768341] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [280.768813] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [280.769260] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [280.769731] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [280.770157] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [280.770968] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9 <7> [280.771311] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9 <7> [280.771672] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9 <7> [280.772005] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0 <7> [280.772343] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0 <7> [280.772792] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2 <7> [280.773134] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21 <7> [280.773489] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000 <7> [280.773832] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE <7> [280.774174] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7> [280.774531] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7> [280.774860] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39 <7> [280.775182] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7> [280.775530] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7> [280.775864] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7> [280.776207] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7> [280.776570] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7> [280.776891] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7> [280.777221] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7> [280.777562] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7> [280.777893] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7> [280.778222] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no <7> [280.778565] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no <7> [280.778898] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7> [280.779234] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7> [280.779588] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7> [280.779930] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no <7> [280.780270] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no <7> [280.780613] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7> [280.780941] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7> [280.781267] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes <7> [280.781623] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7> [280.781952] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no <7> [280.782280] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7> [280.782619] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7> [280.782959] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no <7> [280.783301] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no <7> [280.783654] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no <7> [280.783997] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7> [280.784339] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no <7> [280.784692] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7> [280.785028] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7> [280.785347] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7> [280.785697] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7> [280.786039] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no <7> [280.786374] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes <7> [280.786720] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7> [280.787060] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7> [280.787401] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7> [280.787760] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7> [280.788101] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7> [280.788454] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403 <7> [280.788782] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001 <7> [280.789124] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3 <7> [280.789486] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007 <7> [280.789829] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000 <7> [280.790171] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000 <7> [280.790528] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24 <7> [280.790868] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8 <7> [280.791210] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7> [280.791556] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7> [280.791894] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes <6> [280.792237] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [280.792241] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [280.792245] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [280.806314] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6> [280.811315] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7> [280.812666] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [280.813559] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [280.818899] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [280.855445] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [280.855864] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [280.856240] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [280.856635] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [280.857010] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [280.857384] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [280.857771] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [280.858144] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [280.858654] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <6> [280.894734] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input36 <6> [280.901988] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input37 <6> [280.909687] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input38 <7> [282.080805] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [283.040577] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD off <7> [283.041134] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [283.041634] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [283.042649] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [283.043209] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [283.043497] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [283.044106] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long <7> [283.045023] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [283.045092] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [283.047423] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [283.047484] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [283.053573] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [283.155092] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [283.179530] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [283.187693] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [283.188024] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [283.188279] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [283.189137] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [283.189739] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [283.190166] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [283.190177] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [283.190581] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [283.190926] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [283.191208] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [283.202588] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [283.202897] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [283.203142] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [283.203380] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [283.204042] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [283.319285] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [283.319586] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [283.320205] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [283.321023] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [283.322090] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [283.330100] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [283.330380] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [283.330634] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [283.331005] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [283.331375] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [283.331770] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [283.332144] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [283.332536] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [283.332908] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [283.333930] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [283.334784] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [283.335192] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [283.335589] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [283.336370] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [283.406291] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [283.406615] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [283.407232] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [283.407789] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [283.408400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [283.408835] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [283.409264] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [283.409712] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [283.410174] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [283.438628] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [283.458765] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:110:eDP-1] removing connector from sysfs <7> [283.470637] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:118:DP-1] removing connector from sysfs <7> [283.474906] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:127:HDMI-A-1] removing connector from sysfs <7> [283.488211] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:133:DP-2] removing connector from sysfs <7> [283.492630] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:139:HDMI-A-2] removing connector from sysfs <7> [283.524010] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (18 ms remaining) <7> [283.543614] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [283.554030] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [283.986200] [IGT] Reloading i915 as normal <5> [284.803915] Setting dangerous option force_probe - tainting kernel <6> [284.818672] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0 <7> [284.820590] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K <7> [284.821047] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [284.821317] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH <7> [284.821613] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [284.822070] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [284.822693] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [284.823075] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [284.824475] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [284.824845] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [284.825186] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [284.825555] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [284.825568] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [284.826497] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [284.826556] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047 <7> [284.826948] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [284.827319] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7716 MiB [mem 0x00000000-0x1e244bfff], io: n/a <7> [284.827665] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a <7> [284.828604] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018 <7> [284.829096] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [284.829514] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [284.829903] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [284.830300] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [284.838424] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [284.838696] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [284.838942] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [284.839186] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [284.839479] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [284.839871] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [284.840258] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no <7> [284.840653] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [284.841047] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [284.841331] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no <7> [284.841631] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes <7> [284.841904] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no <7> [284.842159] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3 <7> [284.842558] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [284.842948] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0 <7> [284.843329] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7> [284.844432] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [284.844728] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203 <7> [284.845012] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [284.845275] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [284.845558] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [284.845818] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [284.846080] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 850) <7> [284.846338] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [284.846609] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [284.846870] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [284.847147] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [284.847428] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136) <7> [284.847695] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [284.848018] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [284.848306] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [284.848618] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [284.848887] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [284.849167] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [284.849425] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [284.849678] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [284.849927] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [284.850187] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [284.850484] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [284.850727] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [284.850978] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [284.851272] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [284.851619] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [284.851887] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [284.852140] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [284.852403] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [284.852648] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [284.852891] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [284.853247] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [284.853524] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [284.853780] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [284.854046] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [284.854451] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [284.854723] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [284.854991] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [284.855257] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [284.856056] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <7> [284.856849] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [284.858521] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [284.858547] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [284.858969] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [284.859064] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [284.859449] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [284.859516] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7> [284.859899] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [284.859961] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec) <7> [284.860411] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec) <6> [284.860757] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <7> [284.860727] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec) <7> [284.861026] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec) <7> [284.861282] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec) <7> [284.861583] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec) <7> [284.861854] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec) <7> [284.862111] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec) <7> [284.862366] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec) <7> [284.862642] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec) <7> [284.862930] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec) <7> [284.863225] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec) <7> [284.863512] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec) <7> [284.863789] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec) <7> [284.864172] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec) <7> [284.871193] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available. <7> [284.875192] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [284.875688] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:109:DDI A/PHY A] Using AUX CH A (VBT) <7> [284.876132] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:109:DDI A/PHY A] <7> [284.886404] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [284.886846] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [284.887249] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [284.887678] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [284.888097] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [284.888527] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [284.888930] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP <7> [284.889331] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [284.891604] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0 <7> [284.892013] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0 <7> [284.892448] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:109:DDI A/PHY A] initial power sequencer: PPS 0 <7> [284.892772] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [284.893146] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [284.893713] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [284.894087] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [284.895001] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [284.895321] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [284.895984] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD on <7> [284.896406] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [284.896831] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [284.906556] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [284.906878] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [284.907133] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [285.112105] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [285.115726] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [285.117481] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00 <7> [285.122227] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1 <7> [285.140339] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [285.140542] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [285.140574] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [285.140989] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:110:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [285.142313] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:110:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [285.144424] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:110:eDP-1] DRRS type: static <7> [285.146861] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:110:eDP-1] Using native PCH PWM for backlight control <7> [285.148767] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:110:eDP-1] backlight initialized, disabled, brightness 0/937 <7> [285.151800] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [285.153754] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [285.155665] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [285.157589] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [285.159528] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [285.161555] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [285.165267] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:117:DDI B/PHY B] Using AUX CH B (VBT) <7> [285.167591] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:117:DDI B/PHY B] <7> [285.174026] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [285.176321] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:117:DDI B/PHY B] <7> [285.178333] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:117:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [285.182986] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:132:DDI C/PHY C] Using AUX CH C (VBT) <7> [285.185151] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:132:DDI C/PHY C] <7> [285.190064] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [285.192165] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:132:DDI C/PHY C] <7> [285.194053] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:132:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [285.199036] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled <6> [285.200715] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem <7> [285.201736] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:58:pipe A] hw state readout: disabled <7> [285.203651] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe B] hw state readout: disabled <7> [285.205543] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:108:pipe C] hw state readout: disabled <7> [285.206946] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] hw state readout: disabled, pipe A <7> [285.208336] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A <7> [285.209560] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:cursor A] hw state readout: disabled, pipe A <7> [285.210553] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 1B] hw state readout: disabled, pipe B <7> [285.211557] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] hw state readout: disabled, pipe B <7> [285.212540] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor B] hw state readout: disabled, pipe B <7> [285.213805] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1C] hw state readout: disabled, pipe C <7> [285.214813] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2C] hw state readout: disabled, pipe C <7> [285.215803] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:cursor C] hw state readout: disabled, pipe C <7> [285.216800] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DDI A/PHY A] hw state readout: disabled, pipe A <7> [285.217797] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:117:DDI B/PHY B] hw state readout: disabled, pipe A <7> [285.218567] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST A] hw state readout: disabled, pipe A <7> [285.219236] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST B] hw state readout: disabled, pipe B <7> [285.219927] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST C] hw state readout: disabled, pipe C <7> [285.220723] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:132:DDI C/PHY C] hw state readout: disabled, pipe A <7> [285.221418] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:134:DP-MST A] hw state readout: disabled, pipe A <7> [285.222086] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST B] hw state readout: disabled, pipe B <7> [285.222793] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:136:DP-MST C] hw state readout: disabled, pipe C <7> [285.223550] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [285.224304] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [285.225093] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [285.225868] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [285.226818] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:110:eDP-1] hw state readout: disabled <7> [285.227562] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:118:DP-1] hw state readout: disabled <7> [285.228226] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:127:HDMI-A-1] hw state readout: disabled <7> [285.228911] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:133:DP-2] hw state readout: disabled <7> [285.229591] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:139:HDMI-A-2] hw state readout: disabled <7> [285.230139] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] min_cdclk 0 kHz <7> [285.230712] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] min_cdclk 0 kHz <7> [285.231260] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:cursor A] min_cdclk 0 kHz <7> [285.231839] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:58:pipe A] min_cdclk 0 kHz <7> [285.232404] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 1B] min_cdclk 0 kHz <7> [285.232953] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] min_cdclk 0 kHz <7> [285.233534] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor B] min_cdclk 0 kHz <7> [285.234080] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe B] min_cdclk 0 kHz <7> [285.234657] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1C] min_cdclk 0 kHz <7> [285.235209] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2C] min_cdclk 0 kHz <7> [285.235813] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:cursor C] min_cdclk 0 kHz <7> [285.236334] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:108:pipe C] min_cdclk 0 kHz <7> [285.236824] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:58:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [285.237268] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:83:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [285.237740] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:108:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [285.238557] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [setup_hw_state] <7> [285.239030] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:83:pipe B] enable: no [setup_hw_state] <7> [285.239518] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:108:pipe C] enable: no [setup_hw_state] <7> [285.239986] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [285.240563] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [285.240958] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [285.241390] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [285.241854] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7> [285.245276] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [285.245755] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [285.246182] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0 <7> [285.271130] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [285.271402] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [285.271595] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [285.271786] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [285.271978] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 0: start 0x8 <7> [285.272248] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 1: start 0x108 <7> [285.272526] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 2: start 0x208 <7> [285.272854] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 3: start 0x308 <7> [285.273110] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 4: start 0x3c8 <7> [285.273363] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 0: start 0x8 <7> [285.273738] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 1: start 0x108 <7> [285.274015] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 2: start 0x208 <7> [285.274269] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 3: start 0x308 <7> [285.274544] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 4: start 0x3c8 <7> [285.274862] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 0: start 0x8 <7> [285.275190] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 1: start 0x108 <7> [285.275467] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 2: start 0x208 <7> [285.275752] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 3: start 0x308 <7> [285.275999] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 4: start 0x3c8 <7> [285.276510] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [fastset] <7> [285.276778] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:83:pipe B] enable: no [fastset] <7> [285.277039] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:108:pipe C] enable: no [fastset] <7> [285.277568] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [285.278258] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:83:pipe B] <7> [285.278758] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:108:pipe C] <7> [285.279190] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [285.286511] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:110:eDP-1] adding connector to sysfs <7> [285.288587] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:110:eDP-1] backlight device intel_backlight registered <7> [285.289085] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:110:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [285.290187] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [285.292862] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:110:eDP-1] generating connector hotplug event <7> [285.293020] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:118:DP-1] adding connector to sysfs <7> [285.294620] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [285.297065] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:118:DP-1] generating connector hotplug event <7> [285.297222] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:127:HDMI-A-1] adding connector to sysfs <7> [285.298455] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:127:HDMI-A-1] generating connector hotplug event <7> [285.298604] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:133:DP-2] adding connector to sysfs <7> [285.300147] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [285.303999] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:133:DP-2] generating connector hotplug event <7> [285.304172] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:139:HDMI-A-2] adding connector to sysfs <7> [285.305494] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:139:HDMI-A-2] generating connector hotplug event <6> [285.305631] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7> [285.311883] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [285.346855] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [285.357032] input: Video Bus as /devices/pci0000:00/LNXVIDEO:00/input/input39 <7> [285.359192] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [285.363491] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:58:pipe A] not active, skipping <7> [285.363952] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:83:pipe B] not active, skipping <7> [285.364362] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:108:pipe C] not active, skipping <7> [285.365301] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [285.366601] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config <7> [285.367318] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [285.368336] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [285.369957] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:118:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [285.370439] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [285.371507] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [285.371939] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [285.372476] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [285.372921] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [285.372933] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [285.373318] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [285.376744] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [285.376757] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [285.377231] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:127:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [285.377689] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [285.382212] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:133:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [285.382678] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [285.383353] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [285.383789] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [285.384395] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [285.384841] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [285.384854] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [285.385256] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [285.391900] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [285.391918] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [285.394075] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:139:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [285.395051] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [285.396359] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [285.396393] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [285.396893] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [285.397161] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [285.397478] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [285.397879] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [285.397889] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [285.397895] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [285.397925] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no <7> [285.398191] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [285.398498] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [285.399986] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] status updated from unknown to connected <7> [285.400178] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes: <7> [285.400186] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [285.400195] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [285.400204] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [285.400213] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [285.400570] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [285.404861] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [285.404882] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [285.404896] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [285.405966] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [285.406409] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [285.406959] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [285.407489] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [285.407503] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [285.407914] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [285.411982] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [285.411998] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [285.412496] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [285.412514] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [285.412526] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [285.417072] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [285.417094] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [285.417107] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [285.417867] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [285.418275] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [285.418898] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [285.419345] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [285.419357] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [285.420034] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [285.423703] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [285.423718] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [285.424192] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [285.424207] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? yes <7> [285.424218] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no <7> [285.424227] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no <7> [285.424236] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no <7> [285.424245] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no <7> [285.424311] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [285.424348] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] found preferred mode: 3200x1800 <7> [285.424358] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [285.424421] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:58:pipe A] desired mode 3200x1800 set (0,0) <7> [285.424568] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [285.424628] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] no BIOS fb, allocating a new one <7> [285.431984] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 3200x1800 fb: 0x00180000 <6> [285.435253] fbcon: i915drmfb (fb0) is primary device <6> [285.439335] Console: switching to colour frame buffer device 200x56 <6> [285.439355] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7> [285.439733] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [285.439753] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [285.440597] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [285.440623] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [285.441380] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [285.441808] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [285.442222] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [285.442902] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [285.442917] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [285.442937] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [285.443010] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no <7> [285.443839] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9 <7> [285.444289] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0 <7> [285.444765] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7> [285.445200] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no <7> [285.445643] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no <7> [285.446081] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7> [285.446867] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [285.447297] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [285.451476] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes: <7> [285.451500] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [285.451514] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [285.451529] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [285.451542] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [285.453981] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7> [285.454695] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no <7> [285.455142] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7> [285.455824] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7> [285.456263] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7> [285.456809] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [285.456831] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [285.456845] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [285.457898] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [285.458331] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [285.459045] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [285.459538] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [285.459551] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [285.459968] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [285.464414] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7> [285.464894] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7> [285.465327] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7> [285.467539] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [285.467555] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [285.468045] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [285.468062] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [285.468075] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [285.468521] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7> [285.468958] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes <7> [285.469402] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7> [285.469832] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7> [285.470262] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7> [285.474386] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7> [285.474875] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no <7> [285.475310] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz <7> [285.476038] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [285.476059] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [285.476072] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [285.476784] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [285.477204] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [285.477834] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [285.478281] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [285.478294] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [285.478713] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [285.484966] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [285.484984] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [285.485774] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [285.485792] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? yes <7> [285.485804] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no <7> [285.485813] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no <7> [285.485822] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no <7> [285.485831] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no <7> [285.486206] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [285.486260] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] found preferred mode: 3200x1800 <7> [285.486270] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config <7> [285.486348] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:58:pipe A] desired mode 3200x1800 set (0,0) <7> [285.487428] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7> [285.487918] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [285.490640] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:110:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [285.491164] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:109:DDI A/PHY A][CRTC:58:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [285.492414] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000 <7> [285.492881] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [285.493322] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:109:DDI A/PHY A] [CRTC:58:pipe A] <7> [285.494619] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [285.495082] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [285.495699] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [285.496142] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [285.496764] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [285.497205] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [285.497662] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [285.498104] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [285.498553] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [285.498992] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [285.499495] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [285.499949] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [285.500768] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9 <7> [285.501125] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9 <7> [285.501760] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [285.502205] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [285.504475] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [285.504940] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [285.505824] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [285.506270] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [285.506878] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [285.507315] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [285.507982] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9 <7> [285.508330] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0 <7> [285.508832] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [285.509271] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [285.509777] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0 <7> [285.510120] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2 <7> [285.510468] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21 <7> [285.510811] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000 <7> [285.511152] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE <7> [285.511513] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7> [285.511856] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7> [285.512197] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39 <7> [285.512558] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [285.512996] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [285.513446] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [285.513887] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [285.514327] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [285.514793] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [285.515233] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [285.516022] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [285.517412] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [285.517846] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [285.518271] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [285.519426] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [285.519858] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [285.520279] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [285.520917] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7> [285.521255] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7> [285.521759] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [285.522184] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [285.522779] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7> [285.523112] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7> [285.523598] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [285.524025] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dpll_hw_state <7> [285.526420] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [285.526865] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0 <7> [285.527284] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [285.527911] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [285.528337] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [285.528423] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7> [285.528771] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7> [285.529085] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7> [285.529431] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7> [285.529737] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7> [285.529855] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [285.530067] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no <7> [285.530298] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [285.530929] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [285.531355] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset <7> [285.532025] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [285.532676] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [285.533092] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [285.533388] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no <7> [285.533720] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7> [285.533691] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [285.534083] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7> [285.534147] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [285.534474] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7> [285.534814] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no <7> [285.535135] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no <7> [285.537617] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [285.538073] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [285.538429] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7> [285.538635] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [285.538778] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7> [285.539132] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes <7> [285.539134] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [285.539501] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7> [285.539601] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [285.539856] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no <7> [285.540048] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [285.540205] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7> [285.540524] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [285.540586] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7> [285.540941] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no <7> [285.540984] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:58:pipe A] allocated DPLL 0 <7> [285.541298] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no <7> [285.541436] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:58:pipe A] reserving DPLL 0 <7> [285.541874] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: yes [modeset] <7> [285.542297] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [285.543149] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [285.543737] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [285.544159] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [285.544391] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no <7> [285.544724] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7> [285.544773] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [285.545068] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no <7> [285.545213] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [285.545440] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7> [285.545774] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7> [285.545817] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [285.546110] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7> [285.546256] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [285.546883] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [285.547304] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [285.547882] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [285.548306] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [285.548890] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [285.549314] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [285.549400] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7> [285.549746] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no <7> [285.549940] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [285.550068] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes <7> [285.550439] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7> [285.550579] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [285.550768] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7> [285.551016] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [285.551113] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7> [285.551474] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7> [285.551674] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [285.551800] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7> [285.552148] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403 <7> [285.552113] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [285.552762] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [285.553184] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [285.555391] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001 <7> [285.555728] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3 <7> [285.556047] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007 <7> [285.556408] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000 <7> [285.556387] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [285.556753] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000 <7> [285.556827] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [285.557098] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24 <7> [285.557265] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [285.557450] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8 <7> [285.557727] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [285.557794] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7> [285.558133] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7> [285.558165] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [285.558899] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [285.559333] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [285.559940] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [285.560526] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [285.560952] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [285.561427] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes <7> [285.561524] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <6> [285.561770] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [285.561773] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [285.561776] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [285.561942] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [285.562344] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [285.563048] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [285.563582] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [285.564831] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [285.565238] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [285.565791] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [285.566155] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [285.566765] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [285.567137] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [285.567688] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [285.568011] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:111] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [285.568554] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [285.568921] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [285.569290] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [285.569857] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no <7> [285.571645] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [285.573042] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A] <7> [285.573466] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B] <7> [285.573848] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A] <7> [285.574225] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B] <7> [285.574850] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C] <7> [285.575228] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C] <7> [285.575784] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A] <7> [285.576150] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B] <7> [285.576723] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C] <7> [285.577854] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:58:pipe A] <7> [285.578248] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [285.579422] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power on <7> [285.579908] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [285.580299] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <6> [285.586221] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7> [285.590679] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [285.590958] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power on <7> [285.591218] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000000b <7> [285.796033] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [285.797856] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [285.800635] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [285.808049] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [285.809350] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [285.813175] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [285.814613] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [285.816061] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [285.822164] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Clock recovery OK <7> [285.824043] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [285.825981] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [285.831152] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [285.832641] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [285.834197] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [285.838597] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [285.839897] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [285.842925] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [285.846923] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [285.848291] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [285.850656] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 37 <7> [285.856201] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 436 us, max time under evasion is 250 us <7> [285.864656] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [285.872790] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1] <7> [285.875241] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [285.878795] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7> [285.889062] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [285.889256] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [285.889290] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <6> [285.888785] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7> [285.889858] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [285.889907] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [285.891238] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [285.900613] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [285.901878] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [285.902051] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [285.902763] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [285.904539] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [285.906439] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [285.906498] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [285.906543] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [285.906741] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no <7> [285.908183] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [285.909647] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [285.917505] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes: <7> [285.917560] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [285.917611] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [285.917672] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [285.917734] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [285.926771] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [285.926822] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [285.926857] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [285.928988] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [285.930069] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [285.932053] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [285.935183] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [285.935210] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [285.936429] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [285.940982] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [285.941005] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [285.942160] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [285.942187] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [285.942208] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [285.947265] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [285.947297] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [285.947318] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [285.948625] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [285.948988] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [285.949498] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [285.949993] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [285.950009] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [285.950486] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [285.954043] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [285.954058] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [285.954478] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [285.954498] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? yes <7> [285.954512] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no <7> [285.954523] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no <7> [285.954534] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no <7> [285.954546] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no <7> [285.954625] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [285.954666] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] found preferred mode: 3200x1800 <7> [285.954677] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config <7> [285.955332] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:58:pipe A] desired mode 3200x1800 set (0,0) <7> [285.956079] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [285.957081] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [285.957097] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [285.957827] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [285.958111] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [285.958459] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [285.958905] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [285.958918] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [285.958927] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [285.958981] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no <7> [285.959353] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [285.959822] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [285.962353] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes: <7> [285.962417] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [285.962431] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [285.962570] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [285.962583] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [285.967108] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [285.967238] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [285.967250] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [285.968233] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [285.968783] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [285.969320] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [285.969407] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [285.969758] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [285.969770] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [285.969812] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [285.970033] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [285.970186] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [285.970582] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [285.970982] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [285.971909] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [285.972304] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [285.972705] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [285.973081] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [285.973866] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [285.973881] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [285.974172] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [285.974264] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [285.974272] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [285.978972] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [285.979108] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [285.979121] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [285.979821] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [285.980186] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [285.980798] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [285.981196] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [285.981208] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [285.981578] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [285.986717] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [285.986736] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [285.987016] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [285.992907] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [285.992921] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [285.997272] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [285.998272] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [285.998287] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [285.998966] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [285.999320] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [285.999869] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [286.000208] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [286.000220] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [286.000527] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [286.003740] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [286.003756] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [286.004171] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [286.005138] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [286.005153] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [286.009847] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [286.010785] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [286.010800] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [286.011497] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [286.011857] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [286.012415] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [286.012710] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [286.012718] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [286.012931] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <6> [286.017507] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input40 <7> [286.021849] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [286.021865] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [286.022297] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [286.023117] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [286.023131] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [286.024085] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [286.024550] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [286.024905] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [286.025329] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [286.025342] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [286.025349] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [286.026338] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no <7> [286.026924] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [286.027304] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [286.028720] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes: <7> [286.028735] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [286.028746] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [286.028904] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [286.028917] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [286.033433] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [286.033520] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [286.033533] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [286.034171] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [286.036419] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [286.037012] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [286.037449] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [286.037461] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [286.037821] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [286.041169] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [286.041181] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [286.041690] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [286.041743] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [286.041755] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <6> [286.042849] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input41 <6> [286.045178] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input42 <7> [286.047844] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [286.047900] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [286.047912] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [286.048515] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [286.048758] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [286.049163] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [286.049499] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [286.049510] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [286.049760] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [286.052820] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [286.052834] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [286.053244] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [286.055170] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:143] <7> [287.103334] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:58:pipe A] <7> [287.103542] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [287.103831] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [287.104074] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [287.104317] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [287.104579] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [287.104851] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [287.105092] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [287.105334] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [287.105623] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [287.105885] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [287.106127] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [287.106390] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [287.106652] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [287.106892] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [287.107134] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [287.107392] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [287.107654] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [287.107895] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [287.108136] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [287.108395] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [287.108658] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [287.108900] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [287.109141] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [287.109433] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [287.109687] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [287.109928] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [287.110169] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [287.110437] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [287.110699] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [287.110939] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [287.111187] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [287.111436] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [287.111719] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [287.111953] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [287.112186] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [287.112442] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [287.112743] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [287.113017] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [287.113250] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [287.113524] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset <7> [287.113888] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:58:pipe A] releasing DPLL 0 <7> [287.114194] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [287.114476] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [287.114752] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [287.114990] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [287.115214] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [287.115460] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [287.115754] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [287.116046] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [287.116312] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz <7> [287.116608] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [287.116883] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [287.117112] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [287.117345] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [modeset] <7> [287.117645] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no <7> [287.117937] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [287.118169] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no <7> [287.118655] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [287.120079] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [287.196060] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [287.326724] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 0 <7> [287.328595] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [287.349693] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power off <7> [287.350544] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [287.351411] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - short <7> [287.353099] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power off time <7> [287.355083] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [287.406022] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [287.407001] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long <7> [287.407896] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [287.409623] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [287.411293] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [287.413016] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [287.413419] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:58:pipe A] <7> [287.415808] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [287.415996] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [287.417450] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [287.420433] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A] <7> [287.421926] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B] <7> [287.423252] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A] <7> [287.424592] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B] <7> [287.425562] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C] <7> [287.426895] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C] <7> [287.428385] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A] <7> [287.429706] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B] <7> [287.431013] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C] <7> [287.432328] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1] <7> [287.434435] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [287.438005] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:83:pipe B] <7> [287.439522] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:108:pipe C] <7> [287.543024] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [287.544667] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [287.546198] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [287.548063] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [287.552992] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [287.573467] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [287.657232] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:110:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [287.658630] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:109:DDI A/PHY A][CRTC:58:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [287.659709] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000 <7> [287.661246] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [287.663569] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:109:DDI A/PHY A] [CRTC:58:pipe A] <7> [287.664892] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [287.666479] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [287.667977] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [287.669577] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [287.671009] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [287.672478] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [287.673969] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [287.675417] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [287.676926] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [287.678323] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [287.679706] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [287.681079] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [287.682459] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [287.683846] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [287.685216] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [287.686597] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [287.688000] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [287.689406] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [287.690796] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [287.692173] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [287.693556] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [287.694936] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [287.696322] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [287.697720] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [287.699072] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [287.700446] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [287.701830] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [287.703204] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [287.704588] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [287.705973] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [287.707391] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [287.708773] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [287.710154] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [287.711545] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [287.712947] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [287.714319] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [287.715700] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [287.717091] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [287.718481] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [287.719862] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset <7> [287.721511] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [287.722872] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [287.724217] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [287.725540] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [287.726886] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [287.728229] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [287.729586] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [287.731250] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [287.732795] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [287.734184] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [287.735561] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [287.736933] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [287.738383] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:58:pipe A] allocated DPLL 0 <7> [287.739766] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:58:pipe A] reserving DPLL 0 <7> [287.741178] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: yes [modeset] <7> [287.742553] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [287.743946] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [287.745316] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [287.746702] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [287.748079] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [287.749462] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [287.750857] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [287.752236] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [287.753612] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [287.755023] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [287.756420] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [287.757795] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [287.759167] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [287.760545] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [287.761907] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [287.763299] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [287.764666] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [287.766031] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [287.767452] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [287.768592] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [287.769501] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [287.770418] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [287.771301] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [287.772216] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [287.773123] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [287.774049] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [287.775015] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [287.776009] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [287.776934] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [287.777658] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [287.778324] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [287.779017] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [287.779699] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [287.780411] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [287.780940] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [287.781477] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [287.782120] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [287.782791] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [287.783457] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [287.784098] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [287.784744] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [287.785421] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [287.786079] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [287.786637] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:111] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [287.787171] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [287.787723] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [287.788255] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [287.788803] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no <7> [287.801425] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [287.810482] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [287.811097] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [287.812072] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [287.812857] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [287.813638] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [287.814825] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A] <7> [287.815191] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B] <7> [287.815555] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A] <7> [287.815893] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B] <7> [287.816234] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C] <7> [287.816598] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C] <7> [287.816939] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A] <7> [287.817277] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B] <7> [287.817631] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C] <7> [287.818231] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:58:pipe A] <7> [287.818622] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [287.819229] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power on <7> [287.819704] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (92 ms remaining) <7> [287.918666] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [287.987217] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [287.988431] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power on <7> [287.989551] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003 <7> [288.039021] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [288.040131] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long <7> [288.041146] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [288.042246] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [288.193747] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [288.195057] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [288.196420] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [288.199851] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD on <7> [288.201607] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b <7> [288.208785] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [288.210042] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [288.213724] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [288.215411] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [288.216952] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [288.220931] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Clock recovery OK <7> [288.222451] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [288.223961] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [288.228297] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [288.229826] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [288.231220] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [288.234586] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [288.235586] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [288.237624] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [288.240105] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [288.241266] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [288.242889] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 37 <7> [288.246930] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 307 us, max time under evasion is 250 us <7> [288.256071] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [288.261758] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1] <7> [288.263049] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [288.269464] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [288.271779] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [288.277298] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [288.278936] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [288.280691] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [288.282857] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [288.284976] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [288.285021] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [288.286789] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [288.293123] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [288.293174] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [288.294950] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [288.300914] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [288.302979] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [288.304513] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [288.306154] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [288.307783] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [288.307828] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [288.309287] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [288.315681] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [288.315729] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [288.422967] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [288.423780] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [288.435521] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [288.461051] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [288.461457] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [288.474513] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [288.531508] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [288.532576] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [288.540270] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [288.540915] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [288.541268] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [288.544165] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [288.544712] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [288.545273] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [288.545847] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [288.546716] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [288.547275] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [288.548953] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [288.638666] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [288.639886] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [288.640768] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [288.641606] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <6> [288.646794] Console: switching to colour dummy device 80x25 <7> [288.647165] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:111] is removed <7> [288.647452] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [288.648276] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [288.651753] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [288.652652] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [288.654007] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [288.655247] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [288.672985] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [288.673953] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [288.674811] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [288.675670] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [288.677179] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [288.678288] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [288.679084] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [288.679802] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [288.680560] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [288.681253] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [288.681995] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [288.682777] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [288.683505] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [288.684202] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [288.684978] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [288.685745] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [288.686304] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [288.686878] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [288.687624] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [288.688129] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [288.688665] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [288.689320] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [288.689862] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [288.690590] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [288.691186] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [288.691906] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [288.692587] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [288.693092] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [288.693665] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [288.694218] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [288.694770] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [288.695310] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [288.695940] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [288.696548] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [288.697053] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [288.697655] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [288.698279] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [288.698864] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [288.699448] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [288.699953] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [288.700511] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset <7> [288.701050] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:58:pipe A] releasing DPLL 0 <7> [288.701722] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [288.702286] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [288.703000] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [288.703534] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [288.704113] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [288.704668] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [288.705213] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [modeset] <7> [288.706037] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no <7> [288.706849] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [288.707661] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no <7> [288.709475] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [288.918700] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 0 <7> [288.921155] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [288.943400] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power off <7> [288.943842] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [288.944417] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power off time <7> [288.945209] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - short <7> [288.945786] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [288.996607] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [288.997673] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long <7> [288.998683] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [289.004457] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [289.007792] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [289.007840] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:58:pipe A] <7> [289.009625] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [289.010109] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [289.012078] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [289.016089] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A] <7> [289.018091] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B] <7> [289.019195] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A] <7> [289.020917] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B] <7> [289.022673] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C] <7> [289.024408] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C] <7> [289.026186] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A] <7> [289.027831] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B] <7> [289.029121] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C] <7> [289.030914] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1] <7> [289.034618] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [289.094423] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [289.138170] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:110:eDP-1] removing connector from sysfs <7> [289.150198] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:118:DP-1] removing connector from sysfs <7> [289.153750] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:127:HDMI-A-1] removing connector from sysfs <7> [289.169999] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:133:DP-2] removing connector from sysfs <7> [289.175247] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:139:HDMI-A-2] removing connector from sysfs <7> [289.209519] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (297 ms remaining) <7> [289.510845] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [289.590782] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [290.162280] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS <6> [290.163474] [IGT] i915_pm_rpm: exiting, ret=0

<6> [275.026748] Console: switching to colour dummy device 80x25

<7> [275.032256] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [275.033180] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [275.033197] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [275.033964] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [275.034341] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [275.034711] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [275.035125] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [275.035138] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [275.035146] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [275.035186] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no

<7> [275.035569] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [275.035919] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [275.038118] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes:

<7> [275.038132] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [275.038144] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [275.038328] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [275.038339] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [275.042891] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [275.043037] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [275.043050] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [275.044012] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [275.044405] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [275.044977] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [275.045397] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [275.045409] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [275.045776] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [275.049050] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [275.049061] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [275.049494] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [275.049643] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [275.049655] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [275.054154] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [275.054280] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [275.054291] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [275.054963] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [275.055339] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [275.055906] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [275.056298] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [275.056317] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [275.056683] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [275.059913] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [275.059924] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [275.060334] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [275.069311] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [275.069324] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [275.073758] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [275.074390] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [275.074399] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [275.074962] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [275.075335] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [275.075889] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [275.076280] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [275.076290] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [275.076650] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [275.079892] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [275.079904] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [275.080315] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [275.081309] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [275.081322] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [275.085813] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [275.086436] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [275.086445] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [275.086996] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [275.087374] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [275.087950] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [275.088347] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [275.088358] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [275.088667] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [275.091723] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [275.091733] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [275.092002] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [275.092676] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [275.092690] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [275.093112] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [275.093470] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [275.093843] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [275.094247] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [275.094259] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [275.094267] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [275.094306] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no

<7> [275.094618] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [275.094919] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [275.095926] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes:

<7> [275.095936] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [275.095945] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [275.095979] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [275.095987] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [275.100351] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [275.100396] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [275.100407] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [275.101066] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [275.101416] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [275.101941] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [275.102312] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [275.102322] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [275.102660] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [275.105874] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [275.105885] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [275.106276] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [275.106330] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [275.106341] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [275.110778] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [275.110819] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [275.110830] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [275.111452] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [275.111813] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [275.112330] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [275.112713] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [275.112723] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [275.113061] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [275.116258] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [275.116269] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [275.116676] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [275.117401] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:144]

<7> [275.215843] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [276.164072] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:58:pipe A]

<7> [276.164838] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [276.166192] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [276.166438] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [276.166717] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [276.167105] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [276.167517] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [276.167909] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [276.168302] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [276.168738] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [276.169133] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [276.169539] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [276.169931] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [276.170324] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [276.170734] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [276.171131] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [276.171538] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [276.171936] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [276.172336] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [276.172748] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [276.173141] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [276.173551] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [276.173948] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [276.174347] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [276.174755] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [276.175163] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [276.175580] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [276.175978] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [276.176371] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [276.176777] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [276.177180] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [276.177589] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [276.177980] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [276.178372] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [276.178775] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [276.179167] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [276.179573] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [276.179972] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [276.180378] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [276.180792] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [276.181187] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset

<7> [276.181599] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:58:pipe A] releasing DPLL 0

<7> [276.182052] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [276.182489] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [276.182880] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [276.183275] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [276.183678] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [276.184078] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [276.184474] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [276.184949] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [276.185394] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz

<7> [276.185839] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [276.186214] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [276.186606] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [276.186989] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [modeset]

<7> [276.187374] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no

<7> [276.187773] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [276.188151] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no

<7> [276.188775] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [276.190665] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [276.398873] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 0

<7> [276.400798] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [276.421811] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power off

<7> [276.422338] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [276.422933] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [276.423707] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - short

<7> [276.424366] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [276.473159] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [276.474736] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [276.475140] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [276.476504] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [276.476480] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long

<7> [276.476917] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:58:pipe A]

<7> [276.477808] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [276.478801] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [276.479182] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [276.480215] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [276.482936] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A]

<7> [276.483966] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B]

<7> [276.484868] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A]

<7> [276.485948] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B]

<7> [276.486810] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C]

<7> [276.488016] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C]

<7> [276.488925] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A]

<7> [276.489868] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B]

<7> [276.490737] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C]

<7> [276.491778] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1]

<7> [276.494344] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [276.497912] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:83:pipe B]

<7> [276.499245] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:108:pipe C]

<7> [276.599015] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [276.600412] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [276.601228] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [276.603054] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [276.606752] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [276.626595] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [276.713731] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:110:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [276.715020] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:109:DDI A/PHY A][CRTC:58:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [276.716184] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000

<7> [276.717977] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [276.719550] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:109:DDI A/PHY A] [CRTC:58:pipe A]

<7> [276.722134] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [276.723680] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [276.725127] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [276.726182] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [276.727686] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [276.728710] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [276.730026] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [276.731055] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [276.732299] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [276.733376] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [276.734963] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [276.736175] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [276.737405] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [276.738419] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [276.739680] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [276.740689] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [276.741903] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [276.743010] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [276.744312] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [276.745685] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [276.746968] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [276.748004] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [276.749210] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [276.750273] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [276.751546] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [276.752618] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [276.753872] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [276.754887] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [276.756091] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [276.757120] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [276.758648] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [276.760163] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [276.761601] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [276.763047] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [276.764592] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [276.765597] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [276.767093] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [276.768668] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [276.770209] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [276.771794] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset

<7> [276.773782] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [276.775053] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [276.776066] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [276.777528] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [276.779038] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [276.780539] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [276.781922] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [276.783687] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [276.785199] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [276.786249] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [276.787313] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [276.788381] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [276.789505] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:58:pipe A] allocated DPLL 0

<7> [276.790537] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:58:pipe A] reserving DPLL 0

<7> [276.791826] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: yes [modeset]

<7> [276.792846] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [276.794234] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [276.795538] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [276.796774] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [276.797835] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [276.799041] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [276.800073] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [276.801314] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [276.802323] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [276.803328] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [276.803996] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [276.804961] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [276.805675] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [276.806490] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [276.807094] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [276.807749] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [276.808534] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [276.809125] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [276.809793] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [276.810580] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [276.811173] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [276.812001] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [276.812536] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [276.812971] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [276.813406] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [276.813901] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [276.814381] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [276.814862] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [276.815333] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [276.815812] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [276.816284] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [276.816778] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [276.817364] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [276.817925] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [276.818396] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [276.818877] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [276.819340] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [276.819806] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [276.820269] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [276.820751] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [276.821174] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [276.821560] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [276.821930] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [276.822460] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:111] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [276.822838] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [276.823225] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [276.823618] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [276.823992] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no

<7> [276.835526] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [276.845328] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [276.846000] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [276.847491] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [276.848376] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [276.849811] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [276.850741] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A]

<7> [276.851126] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B]

<7> [276.851507] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A]

<7> [276.851875] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B]

<7> [276.852240] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C]

<7> [276.852633] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C]

<7> [276.853013] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A]

<7> [276.853388] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B]

<7> [276.853787] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C]

<7> [276.854461] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:58:pipe A]

<7> [276.854855] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [276.855589] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power on

<7> [276.856096] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (119 ms remaining)

<7> [276.982842] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [277.064484] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [277.065637] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power on

<7> [277.066765] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003

<7> [277.115984] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [277.117093] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long

<7> [277.118109] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [277.119205] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [277.270995] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [277.272310] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [277.273657] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [277.277063] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD on

<7> [277.278715] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b

<7> [277.285949] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [277.287218] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [277.291036] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [277.292561] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [277.294109] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [277.298173] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Clock recovery OK

<7> [277.299691] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [277.301217] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [277.305569] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [277.307092] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [277.308633] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [277.313303] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [277.314825] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [277.317637] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [277.321115] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [277.322507] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [277.324146] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 37

<7> [277.336880] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [277.343512] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1]

<7> [277.345350] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [277.350845] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [277.350857] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [277.357632] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<6> [277.359203] [IGT] i915_pm_rpm: starting subtest module-reload

<7> [277.359410] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [277.360855] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [277.363197] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [277.365378] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [277.366032] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [277.368070] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [277.374346] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [277.374395] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [277.376879] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [277.383532] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [277.385810] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [277.387291] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [277.390034] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [277.392129] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [277.392159] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [277.393680] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [277.399099] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [277.399132] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [277.500008] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [277.500806] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [277.513617] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [277.539032] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [277.539414] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [277.551579] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [277.579219] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [277.581622] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [277.598888] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [277.599547] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [277.600059] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [277.600606] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [277.601102] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [277.607534] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [277.608055] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [277.608812] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [277.609309] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [277.619485] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [277.716574] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [277.717491] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [277.718098] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [277.718734] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [277.720913] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:111] is removed

<7> [277.721099] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [277.721887] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [277.722593] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [277.723181] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [277.724067] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [277.725383] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [277.737109] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [277.738524] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [277.739085] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [277.739520] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [277.740113] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [277.740744] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [277.741343] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [277.741966] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [277.742582] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [277.743173] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [277.743794] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [277.744388] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [277.745013] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [277.745626] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [277.746219] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [277.746851] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [277.747464] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [277.748057] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [277.748699] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [277.749295] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [277.749906] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [277.750565] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [277.751160] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [277.751766] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [277.752362] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [277.752970] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [277.753635] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [277.754224] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [277.754834] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [277.755444] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [277.756037] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [277.756638] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [277.757229] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [277.757834] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [277.758433] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [277.759027] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [277.759639] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [277.760232] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [277.760852] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [277.761463] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [277.762056] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset

<7> [277.762671] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:58:pipe A] releasing DPLL 0

<7> [277.763350] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [277.764031] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [277.764770] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [277.765361] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [277.765957] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [277.766539] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [277.767091] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [modeset]

<7> [277.767699] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no

<7> [277.768286] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [277.768904] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no

<7> [277.770291] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [277.974724] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 0

<7> [277.976931] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [277.991100] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power off

<7> [277.991578] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [277.992234] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [277.992575] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - short

<7> [277.993253] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [278.044993] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [278.045231] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [278.046156] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long

<7> [278.047561] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [278.049573] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [278.050952] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [278.051947] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:58:pipe A]

<7> [278.054219] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [278.056198] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [278.060248] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A]

<7> [278.062208] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B]

<7> [278.064040] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A]

<7> [278.065839] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B]

<7> [278.067592] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C]

<7> [278.069182] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C]

<7> [278.071021] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A]

<7> [278.072837] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B]

<7> [278.074565] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C]

<7> [278.076321] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1]

<7> [278.079525] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [278.154994] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [278.199181] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:110:eDP-1] removing connector from sysfs

<7> [278.232701] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:118:DP-1] removing connector from sysfs

<7> [278.241730] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:127:HDMI-A-1] removing connector from sysfs

<7> [278.254229] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:133:DP-2] removing connector from sysfs

<7> [278.257750] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:139:HDMI-A-2] removing connector from sysfs

<7> [278.283543] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (263 ms remaining)

<7> [278.551043] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [278.572630] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<5> [280.154840] Setting dangerous option force_probe - tainting kernel

<6> [280.169400] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0

<7> [280.171342] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K

<7> [280.171798] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [280.172087] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH

<7> [280.172366] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [280.172724] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [280.173370] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [280.173817] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [280.175179] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [280.175576] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [280.175940] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [280.176305] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [280.176320] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [280.177274] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [280.177336] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047

<7> [280.177768] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [280.178167] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7716 MiB [mem 0x00000000-0x1e244bfff], io: n/a

<7> [280.178527] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a

<7> [280.179508] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018

<7> [280.180033] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [280.180473] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [280.180890] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [280.181303] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [280.190470] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [280.190772] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [280.191035] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [280.191299] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [280.191613] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [280.192056] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [280.192508] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no

<7> [280.192945] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [280.193379] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [280.193826] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no

<7> [280.194261] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes

<7> [280.194712] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no

<7> [280.195145] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3

<7> [280.195589] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [280.196019] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0

<7> [280.196462] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0

<7> [280.197995] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [280.198318] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203

<7> [280.198646] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [280.198955] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [280.199236] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [280.199673] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [280.199957] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 850)

<7> [280.200235] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [280.200550] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [280.200850] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [280.201143] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [280.201636] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136)

<7> [280.201925] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [280.202195] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [280.202487] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [280.202790] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [280.203066] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [280.203342] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [280.203772] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [280.204106] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [280.204385] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [280.204691] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [280.204999] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [280.205256] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [280.205665] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [280.205952] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [280.206305] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [280.206604] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [280.206924] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [280.207235] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [280.207626] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [280.207882] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [280.208234] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [280.208511] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [280.208790] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [280.209056] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [280.209365] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [280.210188] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [280.210506] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [280.210794] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [280.211819] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<7> [280.213261] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [280.213654] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [280.213919] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [280.214092] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [280.214583] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [280.214799] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<6> [280.215451] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<7> [280.215282] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [280.215636] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided

<7> [280.215904] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec)

<7> [280.216171] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec)

<7> [280.216460] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec)

<7> [280.216751] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec)

<7> [280.217071] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec)

<7> [280.217337] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec)

<7> [280.217664] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec)

<7> [280.217946] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec)

<7> [280.218212] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec)

<7> [280.218526] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec)

<7> [280.218864] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec)

<7> [280.219140] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec)

<7> [280.219503] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec)

<7> [280.219906] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec)

<7> [280.220306] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec)

<7> [280.225873] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available.

<7> [280.230031] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [280.230540] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:109:DDI A/PHY A] Using AUX CH A (VBT)

<7> [280.231008] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:109:DDI A/PHY A]

<7> [280.236729] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [280.237166] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [280.237707] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [280.238130] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [280.238584] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [280.239020] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [280.239436] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP

<7> [280.239834] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [280.240249] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0

<7> [280.240995] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0

<7> [280.241550] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:109:DDI A/PHY A] initial power sequencer: PPS 0

<7> [280.241999] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [280.242390] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [280.242871] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [280.243266] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [280.243668] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [280.244112] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [280.244803] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD on

<7> [280.245243] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [280.245692] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [280.255524] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [280.255886] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [280.256179] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [280.466945] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [280.468029] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [280.470593] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00

<7> [280.476603] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1

<7> [280.497960] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [280.498016] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [280.498051] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [280.498671] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:110:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [280.500645] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:110:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [280.502305] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:110:eDP-1] DRRS type: static

<7> [280.504667] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:110:eDP-1] Using native PCH PWM for backlight control

<7> [280.506675] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:110:eDP-1] backlight initialized, disabled, brightness 0/937

<7> [280.509329] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [280.511099] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [280.512693] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [280.514346] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [280.516344] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [280.518677] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [280.523557] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:117:DDI B/PHY B] Using AUX CH B (VBT)

<7> [280.526144] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:117:DDI B/PHY B]

<7> [280.533487] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [280.536094] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:117:DDI B/PHY B]

<7> [280.538370] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:117:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [280.543814] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:132:DDI C/PHY C] Using AUX CH C (VBT)

<7> [280.546576] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:132:DDI C/PHY C]

<7> [280.551932] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [280.553974] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:132:DDI C/PHY C]

<7> [280.555545] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:132:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [280.561607] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled

<6> [280.563991] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem

<7> [280.565871] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:58:pipe A] hw state readout: disabled

<7> [280.567911] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe B] hw state readout: disabled

<7> [280.569714] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:108:pipe C] hw state readout: disabled

<7> [280.571189] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] hw state readout: disabled, pipe A

<7> [280.572670] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A

<7> [280.574198] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:cursor A] hw state readout: disabled, pipe A

<7> [280.575219] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 1B] hw state readout: disabled, pipe B

<7> [280.576516] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] hw state readout: disabled, pipe B

<7> [280.577559] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor B] hw state readout: disabled, pipe B

<7> [280.578587] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1C] hw state readout: disabled, pipe C

<7> [280.579623] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2C] hw state readout: disabled, pipe C

<7> [280.580472] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:cursor C] hw state readout: disabled, pipe C

<7> [280.581271] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [280.582322] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:117:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [280.583264] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST A] hw state readout: disabled, pipe A

<7> [280.584199] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST B] hw state readout: disabled, pipe B

<7> [280.585124] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST C] hw state readout: disabled, pipe C

<7> [280.585674] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:132:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [280.586316] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:134:DP-MST A] hw state readout: disabled, pipe A

<7> [280.587034] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST B] hw state readout: disabled, pipe B

<7> [280.587739] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:136:DP-MST C] hw state readout: disabled, pipe C

<7> [280.588518] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [280.589293] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [280.589960] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [280.590586] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [280.591548] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:110:eDP-1] hw state readout: disabled

<7> [280.592387] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:118:DP-1] hw state readout: disabled

<7> [280.593233] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:127:HDMI-A-1] hw state readout: disabled

<7> [280.594031] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:133:DP-2] hw state readout: disabled

<7> [280.594529] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:139:HDMI-A-2] hw state readout: disabled

<7> [280.595001] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] min_cdclk 0 kHz

<7> [280.595590] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] min_cdclk 0 kHz

<7> [280.596144] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:cursor A] min_cdclk 0 kHz

<7> [280.596745] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:58:pipe A] min_cdclk 0 kHz

<7> [280.597265] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 1B] min_cdclk 0 kHz

<7> [280.597665] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] min_cdclk 0 kHz

<7> [280.598128] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor B] min_cdclk 0 kHz

<7> [280.598704] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe B] min_cdclk 0 kHz

<7> [280.599252] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1C] min_cdclk 0 kHz

<7> [280.599849] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2C] min_cdclk 0 kHz

<7> [280.600432] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:cursor C] min_cdclk 0 kHz

<7> [280.600836] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:108:pipe C] min_cdclk 0 kHz

<7> [280.601198] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:58:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [280.601761] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:83:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [280.602303] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:108:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [280.603239] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [setup_hw_state]

<7> [280.603727] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:83:pipe B] enable: no [setup_hw_state]

<7> [280.604048] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:108:pipe C] enable: no [setup_hw_state]

<7> [280.604351] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [280.604898] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [280.605292] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [280.605724] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [280.606189] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global

<7> [280.609490] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [280.609825] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [280.610190] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0

<7> [280.631248] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [280.631525] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [280.631725] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [280.631922] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [280.632138] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 0: start 0x8

<7> [280.632426] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 1: start 0x108

<7> [280.632823] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 2: start 0x208

<7> [280.633218] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 3: start 0x308

<7> [280.633663] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 4: start 0x3c8

<7> [280.634066] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 0: start 0x8

<7> [280.634402] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 1: start 0x108

<7> [280.634716] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 2: start 0x208

<7> [280.635001] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 3: start 0x308

<7> [280.635354] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 4: start 0x3c8

<7> [280.635750] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 0: start 0x8

<7> [280.636135] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 1: start 0x108

<7> [280.636537] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 2: start 0x208

<7> [280.636927] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 3: start 0x308

<7> [280.637195] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 4: start 0x3c8

<7> [280.637712] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [fastset]

<7> [280.638107] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:83:pipe B] enable: no [fastset]

<7> [280.638507] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:108:pipe C] enable: no [fastset]

<7> [280.639173] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [280.639978] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:83:pipe B]

<7> [280.640429] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:108:pipe C]

<7> [280.640903] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [280.646872] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:110:eDP-1] adding connector to sysfs

<7> [280.648277] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:110:eDP-1] backlight device intel_backlight registered

<7> [280.648798] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:110:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [280.649856] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [280.652489] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:110:eDP-1] generating connector hotplug event

<7> [280.652652] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:118:DP-1] adding connector to sysfs

<7> [280.654297] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [280.661693] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:118:DP-1] generating connector hotplug event

<7> [280.661858] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:127:HDMI-A-1] adding connector to sysfs

<7> [280.663155] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:127:HDMI-A-1] generating connector hotplug event

<7> [280.663307] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:133:DP-2] adding connector to sysfs

<7> [280.667034] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [280.672069] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:133:DP-2] generating connector hotplug event

<7> [280.672203] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:139:HDMI-A-2] adding connector to sysfs

<7> [280.673433] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:139:HDMI-A-2] generating connector hotplug event

<6> [280.673570] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0

<7> [280.680259] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [280.715784] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [280.726000] input: Video Bus as /devices/pci0000:00/LNXVIDEO:00/input/input35

<7> [280.728206] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [280.733687] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [280.734160] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:118:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [280.734636] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [280.735039] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:127:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [280.735514] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [280.735911] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:133:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [280.736326] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [280.737247] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:58:pipe A] not active, skipping

<7> [280.737719] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:83:pipe B] not active, skipping

<7> [280.738139] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:108:pipe C] not active, skipping

<7> [280.738571] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config

<7> [280.739291] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [280.740307] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [280.740921] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:139:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [280.741392] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [280.743191] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [280.743211] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [280.743701] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] status updated from unknown to disconnected

<7> [280.743723] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] disconnected

<7> [280.743734] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:110:eDP-1] EDID changed, epoch counter 2

<7> [280.743766] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [280.743778] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [280.744194] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [280.744208] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [280.744220] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [280.744662] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [280.744807] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [280.744822] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [280.744834] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [280.745238] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [280.745252] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [280.745263] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [280.745693] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [280.745705] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [280.745715] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? no

<7> [280.745723] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no

<7> [280.745733] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no

<7> [280.745742] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no

<7> [280.745751] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no

<7> [280.745812] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [280.745833] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [280.745953] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [280.745968] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [280.749251] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9

<7> [280.749836] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [280.750612] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [280.750636] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [280.751059] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] disconnected

<7> [280.751084] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [280.751097] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [280.751624] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [280.751639] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [280.751651] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [280.752044] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [280.752059] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [280.752071] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [280.752516] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [280.752530] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [280.752542] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [280.752946] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [280.752959] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [280.752980] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? no

<7> [280.752990] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no

<7> [280.753000] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no

<7> [280.753010] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no

<7> [280.753019] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no

<7> [280.753332] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [280.753372] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [280.753935] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [280.753969] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [280.754061] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [280.754741] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [280.754883] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [280.754899] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [280.755339] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] disconnected

<7> [280.755355] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [280.755367] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [280.755795] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [280.755809] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [280.755821] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [280.756222] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [280.756235] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [280.756247] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [280.756692] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [280.756705] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [280.756717] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [280.757124] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [280.757136] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [280.757146] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? no

<7> [280.757155] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no

<7> [280.757164] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no

<7> [280.757173] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no

<7> [280.757182] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no

<7> [280.757242] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [280.757262] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [280.757367] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [280.757395] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [280.757517] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0

<7> [280.757937] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no

<7> [280.758355] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no

<7> [280.758813] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no

<7> [280.759218] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes

<7> [280.759670] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes

<7> [280.760104] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no

<7> [280.760704] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [280.760730] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes

<7> [280.761165] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no

<7> [280.761616] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes

<7> [280.762033] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no

<7> [280.762475] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes

<7> [280.762890] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no

<7> [280.763299] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes

<7> [280.763741] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes

<7> [280.764163] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no

<7> [280.764590] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no

<7> [280.765011] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes

<7> [280.765482] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes

<7> [280.765911] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no

<7> [280.766341] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz

<7> [280.767915] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device

<7> [280.768341] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [280.768813] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [280.769260] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [280.769731] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [280.770157] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [280.770968] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9

<7> [280.771311] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9

<7> [280.771672] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9

<7> [280.772005] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0

<7> [280.772343] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0

<7> [280.772792] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2

<7> [280.773134] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21

<7> [280.773489] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000

<7> [280.773832] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE

<7> [280.774174] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48

<7> [280.774531] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2

<7> [280.774860] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39

<7> [280.775182] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no

<7> [280.775530] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no

<7> [280.775864] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no

<7> [280.776207] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes

<7> [280.776570] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no

<7> [280.776891] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no

<7> [280.777221] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes

<7> [280.777562] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes

<7> [280.777893] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no

<7> [280.778222] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no

<7> [280.778565] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no

<7> [280.778898] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes

<7> [280.779234] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no

<7> [280.779588] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no

<7> [280.779930] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no

<7> [280.780270] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no

<7> [280.780613] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no

<7> [280.780941] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no

<7> [280.781267] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes

<7> [280.781623] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes

<7> [280.781952] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no

<7> [280.782280] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no

<7> [280.782619] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no

<7> [280.782959] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no

<7> [280.783301] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no

<7> [280.783654] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no

<7> [280.783997] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no

<7> [280.784339] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no

<7> [280.784692] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes

<7> [280.785028] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no

<7> [280.785347] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes

<7> [280.785697] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes

<7> [280.786039] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no

<7> [280.786374] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes

<7> [280.786720] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no

<7> [280.787060] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no

<7> [280.787401] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no

<7> [280.787760] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no

<7> [280.788101] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled

<7> [280.788454] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403

<7> [280.788782] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001

<7> [280.789124] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3

<7> [280.789486] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007

<7> [280.789829] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000

<7> [280.790171] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000

<7> [280.790528] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24

<7> [280.790868] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8

<7> [280.791210] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no

<7> [280.791556] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no

<7> [280.791894] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes

<6> [280.792237] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [280.792241] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [280.792245] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [280.806314] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4

<6> [280.811315] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])

<7> [280.812666] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [280.813559] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [280.818899] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [280.855445] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [280.855864] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [280.856240] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [280.856635] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [280.857010] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [280.857384] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [280.857771] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [280.858144] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [280.858654] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<6> [280.894734] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input36

<6> [280.901988] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input37

<6> [280.909687] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input38

<7> [282.080805] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [283.040577] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD off

<7> [283.041134] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [283.041634] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [283.042649] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [283.043209] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [283.043497] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [283.044106] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long

<7> [283.045023] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [283.045092] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [283.047423] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [283.047484] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [283.053573] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [283.155092] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [283.179530] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [283.187693] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [283.188024] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [283.188279] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [283.189137] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [283.189739] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [283.190166] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [283.190177] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [283.190581] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [283.190926] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [283.191208] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [283.202588] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [283.202897] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [283.203142] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [283.203380] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [283.204042] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [283.319285] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [283.319586] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [283.320205] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [283.321023] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [283.322090] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [283.330100] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [283.330380] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [283.330634] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [283.331005] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [283.331375] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [283.331770] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [283.332144] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [283.332536] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [283.332908] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [283.333930] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [283.334784] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [283.335192] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [283.335589] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [283.336370] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [283.406291] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [283.406615] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [283.407232] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [283.407789] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [283.408400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [283.408835] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [283.409264] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [283.409712] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [283.410174] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [283.438628] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [283.458765] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:110:eDP-1] removing connector from sysfs

<7> [283.470637] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:118:DP-1] removing connector from sysfs

<7> [283.474906] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:127:HDMI-A-1] removing connector from sysfs

<7> [283.488211] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:133:DP-2] removing connector from sysfs

<7> [283.492630] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:139:HDMI-A-2] removing connector from sysfs

<7> [283.524010] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (18 ms remaining)

<7> [283.543614] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [283.554030] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<5> [284.803915] Setting dangerous option force_probe - tainting kernel

<6> [284.818672] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0

<7> [284.820590] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K

<7> [284.821047] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [284.821317] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH

<7> [284.821613] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [284.822070] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [284.822693] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [284.823075] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [284.824475] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [284.824845] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [284.825186] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [284.825555] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [284.825568] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [284.826497] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [284.826556] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047

<7> [284.826948] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [284.827319] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7716 MiB [mem 0x00000000-0x1e244bfff], io: n/a

<7> [284.827665] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a

<7> [284.828604] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018

<7> [284.829096] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [284.829514] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [284.829903] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [284.830300] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [284.838424] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [284.838696] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [284.838942] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [284.839186] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [284.839479] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [284.839871] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [284.840258] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no

<7> [284.840653] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [284.841047] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [284.841331] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no

<7> [284.841631] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes

<7> [284.841904] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no

<7> [284.842159] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3

<7> [284.842558] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [284.842948] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0

<7> [284.843329] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0

<7> [284.844432] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [284.844728] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203

<7> [284.845012] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [284.845275] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [284.845558] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [284.845818] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [284.846080] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 850)

<7> [284.846338] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [284.846609] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [284.846870] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [284.847147] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [284.847428] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136)

<7> [284.847695] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [284.848018] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [284.848306] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [284.848618] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [284.848887] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [284.849167] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [284.849425] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [284.849678] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [284.849927] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [284.850187] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [284.850484] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [284.850727] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [284.850978] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [284.851272] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [284.851619] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [284.851887] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [284.852140] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [284.852403] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [284.852648] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [284.852891] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [284.853247] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [284.853524] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [284.853780] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [284.854046] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [284.854451] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [284.854723] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [284.854991] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [284.855257] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [284.856056] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<7> [284.856849] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [284.858521] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [284.858547] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [284.858969] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [284.859064] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [284.859449] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [284.859516] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided

<7> [284.859899] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [284.859961] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec)

<7> [284.860411] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec)

<6> [284.860757] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<7> [284.860727] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec)

<7> [284.861026] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec)

<7> [284.861282] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec)

<7> [284.861583] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec)

<7> [284.861854] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec)

<7> [284.862111] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec)

<7> [284.862366] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec)

<7> [284.862642] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec)

<7> [284.862930] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec)

<7> [284.863225] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec)

<7> [284.863512] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec)

<7> [284.863789] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec)

<7> [284.864172] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec)

<7> [284.871193] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available.

<7> [284.875192] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [284.875688] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:109:DDI A/PHY A] Using AUX CH A (VBT)

<7> [284.876132] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:109:DDI A/PHY A]

<7> [284.886404] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [284.886846] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [284.887249] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [284.887678] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [284.888097] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [284.888527] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [284.888930] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP

<7> [284.889331] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [284.891604] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0

<7> [284.892013] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0

<7> [284.892448] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:109:DDI A/PHY A] initial power sequencer: PPS 0

<7> [284.892772] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [284.893146] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [284.893713] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [284.894087] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [284.895001] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [284.895321] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [284.895984] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD on

<7> [284.896406] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [284.896831] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [284.906556] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [284.906878] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [284.907133] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [285.112105] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [285.115726] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [285.117481] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00

<7> [285.122227] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1

<7> [285.140339] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [285.140542] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [285.140574] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [285.140989] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:110:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [285.142313] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:110:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [285.144424] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:110:eDP-1] DRRS type: static

<7> [285.146861] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:110:eDP-1] Using native PCH PWM for backlight control

<7> [285.148767] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:110:eDP-1] backlight initialized, disabled, brightness 0/937

<7> [285.151800] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [285.153754] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [285.155665] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [285.157589] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [285.159528] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [285.161555] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [285.165267] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:117:DDI B/PHY B] Using AUX CH B (VBT)

<7> [285.167591] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:117:DDI B/PHY B]

<7> [285.174026] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [285.176321] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:117:DDI B/PHY B]

<7> [285.178333] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:117:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [285.182986] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:132:DDI C/PHY C] Using AUX CH C (VBT)

<7> [285.185151] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:132:DDI C/PHY C]

<7> [285.190064] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [285.192165] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:132:DDI C/PHY C]

<7> [285.194053] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:132:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [285.199036] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled

<6> [285.200715] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem

<7> [285.201736] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:58:pipe A] hw state readout: disabled

<7> [285.203651] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe B] hw state readout: disabled

<7> [285.205543] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:108:pipe C] hw state readout: disabled

<7> [285.206946] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] hw state readout: disabled, pipe A

<7> [285.208336] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A

<7> [285.209560] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:cursor A] hw state readout: disabled, pipe A

<7> [285.210553] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 1B] hw state readout: disabled, pipe B

<7> [285.211557] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] hw state readout: disabled, pipe B

<7> [285.212540] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor B] hw state readout: disabled, pipe B

<7> [285.213805] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1C] hw state readout: disabled, pipe C

<7> [285.214813] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2C] hw state readout: disabled, pipe C

<7> [285.215803] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:cursor C] hw state readout: disabled, pipe C

<7> [285.216800] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [285.217797] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:117:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [285.218567] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST A] hw state readout: disabled, pipe A

<7> [285.219236] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST B] hw state readout: disabled, pipe B

<7> [285.219927] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST C] hw state readout: disabled, pipe C

<7> [285.220723] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:132:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [285.221418] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:134:DP-MST A] hw state readout: disabled, pipe A

<7> [285.222086] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST B] hw state readout: disabled, pipe B

<7> [285.222793] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:136:DP-MST C] hw state readout: disabled, pipe C

<7> [285.223550] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [285.224304] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [285.225093] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [285.225868] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [285.226818] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:110:eDP-1] hw state readout: disabled

<7> [285.227562] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:118:DP-1] hw state readout: disabled

<7> [285.228226] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:127:HDMI-A-1] hw state readout: disabled

<7> [285.228911] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:133:DP-2] hw state readout: disabled

<7> [285.229591] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:139:HDMI-A-2] hw state readout: disabled

<7> [285.230139] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] min_cdclk 0 kHz

<7> [285.230712] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] min_cdclk 0 kHz

<7> [285.231260] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:cursor A] min_cdclk 0 kHz

<7> [285.231839] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:58:pipe A] min_cdclk 0 kHz

<7> [285.232404] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 1B] min_cdclk 0 kHz

<7> [285.232953] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] min_cdclk 0 kHz

<7> [285.233534] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor B] min_cdclk 0 kHz

<7> [285.234080] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe B] min_cdclk 0 kHz

<7> [285.234657] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1C] min_cdclk 0 kHz

<7> [285.235209] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2C] min_cdclk 0 kHz

<7> [285.235813] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:cursor C] min_cdclk 0 kHz

<7> [285.236334] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:108:pipe C] min_cdclk 0 kHz

<7> [285.236824] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:58:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [285.237268] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:83:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [285.237740] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:108:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [285.238557] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [setup_hw_state]

<7> [285.239030] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:83:pipe B] enable: no [setup_hw_state]

<7> [285.239518] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:108:pipe C] enable: no [setup_hw_state]

<7> [285.239986] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [285.240563] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [285.240958] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [285.241390] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [285.241854] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global

<7> [285.245276] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [285.245755] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [285.246182] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0

<7> [285.271130] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [285.271402] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [285.271595] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [285.271786] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [285.271978] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 0: start 0x8

<7> [285.272248] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 1: start 0x108

<7> [285.272526] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 2: start 0x208

<7> [285.272854] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 3: start 0x308

<7> [285.273110] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 4: start 0x3c8

<7> [285.273363] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 0: start 0x8

<7> [285.273738] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 1: start 0x108

<7> [285.274015] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 2: start 0x208

<7> [285.274269] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 3: start 0x308

<7> [285.274544] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 4: start 0x3c8

<7> [285.274862] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 0: start 0x8

<7> [285.275190] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 1: start 0x108

<7> [285.275467] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 2: start 0x208

<7> [285.275752] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 3: start 0x308

<7> [285.275999] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 4: start 0x3c8

<7> [285.276510] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [fastset]

<7> [285.276778] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:83:pipe B] enable: no [fastset]

<7> [285.277039] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:108:pipe C] enable: no [fastset]

<7> [285.277568] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [285.278258] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:83:pipe B]

<7> [285.278758] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:108:pipe C]

<7> [285.279190] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [285.286511] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:110:eDP-1] adding connector to sysfs

<7> [285.288587] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:110:eDP-1] backlight device intel_backlight registered

<7> [285.289085] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:110:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [285.290187] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [285.292862] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:110:eDP-1] generating connector hotplug event

<7> [285.293020] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:118:DP-1] adding connector to sysfs

<7> [285.294620] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [285.297065] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:118:DP-1] generating connector hotplug event

<7> [285.297222] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:127:HDMI-A-1] adding connector to sysfs

<7> [285.298455] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:127:HDMI-A-1] generating connector hotplug event

<7> [285.298604] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:133:DP-2] adding connector to sysfs

<7> [285.300147] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [285.303999] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:133:DP-2] generating connector hotplug event

<7> [285.304172] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:139:HDMI-A-2] adding connector to sysfs

<7> [285.305494] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:139:HDMI-A-2] generating connector hotplug event

<6> [285.305631] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0

<7> [285.311883] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [285.346855] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [285.357032] input: Video Bus as /devices/pci0000:00/LNXVIDEO:00/input/input39

<7> [285.359192] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [285.363491] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:58:pipe A] not active, skipping

<7> [285.363952] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:83:pipe B] not active, skipping

<7> [285.364362] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:108:pipe C] not active, skipping

<7> [285.365301] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [285.366601] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config

<7> [285.367318] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [285.368336] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [285.369957] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:118:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [285.370439] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [285.371507] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [285.371939] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [285.372476] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [285.372921] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [285.372933] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [285.373318] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [285.376744] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [285.376757] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [285.377231] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:127:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [285.377689] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [285.382212] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:133:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [285.382678] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [285.383353] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [285.383789] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [285.384395] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [285.384841] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [285.384854] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [285.385256] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [285.391900] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [285.391918] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [285.394075] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:139:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [285.395051] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [285.396359] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [285.396393] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [285.396893] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [285.397161] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [285.397478] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [285.397879] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [285.397889] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [285.397895] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [285.397925] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no

<7> [285.398191] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [285.398498] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [285.399986] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] status updated from unknown to connected

<7> [285.400178] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes:

<7> [285.400186] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [285.400195] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [285.400204] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [285.400213] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [285.400570] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [285.404861] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [285.404882] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [285.404896] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [285.405966] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [285.406409] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [285.406959] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [285.407489] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [285.407503] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [285.407914] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [285.411982] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [285.411998] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [285.412496] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [285.412514] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [285.412526] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [285.417072] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [285.417094] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [285.417107] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [285.417867] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [285.418275] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [285.418898] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [285.419345] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [285.419357] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [285.420034] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [285.423703] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [285.423718] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [285.424192] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [285.424207] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? yes

<7> [285.424218] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no

<7> [285.424227] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no

<7> [285.424236] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no

<7> [285.424245] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no

<7> [285.424311] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [285.424348] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] found preferred mode: 3200x1800

<7> [285.424358] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [285.424421] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:58:pipe A] desired mode 3200x1800 set (0,0)

<7> [285.424568] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [285.424628] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] no BIOS fb, allocating a new one

<7> [285.431984] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 3200x1800 fb: 0x00180000

<6> [285.435253] fbcon: i915drmfb (fb0) is primary device

<6> [285.439335] Console: switching to colour frame buffer device 200x56

<6> [285.439355] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device

<7> [285.439733] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [285.439753] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [285.440597] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [285.440623] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [285.441380] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [285.441808] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [285.442222] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [285.442902] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [285.442917] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [285.442937] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [285.443010] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no

<7> [285.443839] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9

<7> [285.444289] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0

<7> [285.444765] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no

<7> [285.445200] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no

<7> [285.445643] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no

<7> [285.446081] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes

<7> [285.446867] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [285.447297] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [285.451476] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes:

<7> [285.451500] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [285.451514] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [285.451529] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [285.451542] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [285.453981] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes

<7> [285.454695] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no

<7> [285.455142] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes

<7> [285.455824] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no

<7> [285.456263] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes

<7> [285.456809] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [285.456831] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [285.456845] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [285.457898] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [285.458331] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [285.459045] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [285.459538] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [285.459551] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [285.459968] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [285.464414] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no

<7> [285.464894] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes

<7> [285.465327] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no

<7> [285.467539] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [285.467555] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [285.468045] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [285.468062] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [285.468075] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [285.468521] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes

<7> [285.468958] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes

<7> [285.469402] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no

<7> [285.469832] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no

<7> [285.470262] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes

<7> [285.474386] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes

<7> [285.474875] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no

<7> [285.475310] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz

<7> [285.476038] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [285.476059] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [285.476072] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [285.476784] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [285.477204] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [285.477834] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [285.478281] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [285.478294] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [285.478713] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [285.484966] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [285.484984] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [285.485774] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [285.485792] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? yes

<7> [285.485804] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no

<7> [285.485813] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no

<7> [285.485822] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no

<7> [285.485831] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no

<7> [285.486206] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [285.486260] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] found preferred mode: 3200x1800

<7> [285.486270] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config

<7> [285.486348] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:58:pipe A] desired mode 3200x1800 set (0,0)

<7> [285.487428] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device

<7> [285.487918] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [285.490640] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:110:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [285.491164] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:109:DDI A/PHY A][CRTC:58:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [285.492414] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000

<7> [285.492881] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [285.493322] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:109:DDI A/PHY A] [CRTC:58:pipe A]

<7> [285.494619] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [285.495082] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [285.495699] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [285.496142] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [285.496764] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [285.497205] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [285.497662] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [285.498104] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [285.498553] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [285.498992] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [285.499495] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [285.499949] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [285.500768] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9

<7> [285.501125] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9

<7> [285.501760] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [285.502205] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [285.504475] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [285.504940] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [285.505824] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [285.506270] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [285.506878] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [285.507315] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [285.507982] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9

<7> [285.508330] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0

<7> [285.508832] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [285.509271] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [285.509777] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0

<7> [285.510120] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2

<7> [285.510468] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21

<7> [285.510811] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000

<7> [285.511152] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE

<7> [285.511513] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48

<7> [285.511856] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2

<7> [285.512197] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39

<7> [285.512558] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [285.512996] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [285.513446] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [285.513887] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [285.514327] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [285.514793] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [285.515233] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [285.516022] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [285.517412] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [285.517846] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [285.518271] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [285.519426] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [285.519858] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [285.520279] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [285.520917] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no

<7> [285.521255] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no

<7> [285.521759] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [285.522184] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [285.522779] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no

<7> [285.523112] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes

<7> [285.523598] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [285.524025] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dpll_hw_state

<7> [285.526420] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [285.526865] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0

<7> [285.527284] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [285.527911] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [285.528337] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [285.528423] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no

<7> [285.528771] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no

<7> [285.529085] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes

<7> [285.529431] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes

<7> [285.529737] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no

<7> [285.529855] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [285.530067] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no

<7> [285.530298] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [285.530929] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [285.531355] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset

<7> [285.532025] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [285.532676] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [285.533092] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [285.533388] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no

<7> [285.533720] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes

<7> [285.533691] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [285.534083] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no

<7> [285.534147] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [285.534474] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no

<7> [285.534814] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no

<7> [285.535135] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no

<7> [285.537617] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [285.538073] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [285.538429] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no

<7> [285.538635] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [285.538778] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no

<7> [285.539132] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes

<7> [285.539134] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [285.539501] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes

<7> [285.539601] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [285.539856] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no

<7> [285.540048] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [285.540205] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no

<7> [285.540524] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [285.540586] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no

<7> [285.540941] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no

<7> [285.540984] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:58:pipe A] allocated DPLL 0

<7> [285.541298] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no

<7> [285.541436] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:58:pipe A] reserving DPLL 0

<7> [285.541874] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: yes [modeset]

<7> [285.542297] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [285.543149] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [285.543737] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [285.544159] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [285.544391] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no

<7> [285.544724] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no

<7> [285.544773] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [285.545068] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no

<7> [285.545213] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [285.545440] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes

<7> [285.545774] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no

<7> [285.545817] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [285.546110] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes

<7> [285.546256] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [285.546883] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [285.547304] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [285.547882] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [285.548306] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [285.548890] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [285.549314] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [285.549400] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes

<7> [285.549746] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no

<7> [285.549940] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [285.550068] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes

<7> [285.550439] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no

<7> [285.550579] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [285.550768] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no

<7> [285.551016] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [285.551113] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no

<7> [285.551474] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no

<7> [285.551674] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [285.551800] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled

<7> [285.552148] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403

<7> [285.552113] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [285.552762] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [285.553184] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [285.555391] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001

<7> [285.555728] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3

<7> [285.556047] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007

<7> [285.556408] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000

<7> [285.556387] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [285.556753] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000

<7> [285.556827] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [285.557098] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24

<7> [285.557265] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [285.557450] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8

<7> [285.557727] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [285.557794] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no

<7> [285.558133] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no

<7> [285.558165] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [285.558899] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [285.559333] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [285.559940] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [285.560526] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [285.560952] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [285.561427] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes

<7> [285.561524] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<6> [285.561770] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [285.561773] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [285.561776] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [285.561942] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [285.562344] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [285.563048] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [285.563582] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [285.564831] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [285.565238] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [285.565791] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [285.566155] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [285.566765] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [285.567137] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [285.567688] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [285.568011] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:111] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [285.568554] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [285.568921] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [285.569290] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [285.569857] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no

<7> [285.571645] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [285.573042] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A]

<7> [285.573466] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B]

<7> [285.573848] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A]

<7> [285.574225] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B]

<7> [285.574850] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C]

<7> [285.575228] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C]

<7> [285.575784] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A]

<7> [285.576150] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B]

<7> [285.576723] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C]

<7> [285.577854] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:58:pipe A]

<7> [285.578248] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [285.579422] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power on

<7> [285.579908] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [285.580299] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<6> [285.586221] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4

<7> [285.590679] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [285.590958] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power on

<7> [285.591218] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000000b

<7> [285.796033] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [285.797856] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [285.800635] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [285.808049] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [285.809350] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [285.813175] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [285.814613] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [285.816061] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [285.822164] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Clock recovery OK

<7> [285.824043] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [285.825981] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [285.831152] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [285.832641] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [285.834197] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [285.838597] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [285.839897] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [285.842925] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [285.846923] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [285.848291] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [285.850656] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 37

<7> [285.856201] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 436 us, max time under evasion is 250 us

<7> [285.864656] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [285.872790] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1]

<7> [285.875241] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [285.878795] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp

<7> [285.889062] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [285.889256] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [285.889290] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<6> [285.888785] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])

<7> [285.889858] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [285.889907] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [285.891238] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [285.900613] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [285.901878] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [285.902051] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [285.902763] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [285.904539] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [285.906439] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [285.906498] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [285.906543] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [285.906741] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no

<7> [285.908183] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [285.909647] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [285.917505] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes:

<7> [285.917560] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [285.917611] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [285.917672] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [285.917734] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [285.926771] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [285.926822] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [285.926857] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [285.928988] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [285.930069] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [285.932053] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [285.935183] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [285.935210] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [285.936429] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [285.940982] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [285.941005] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [285.942160] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [285.942187] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [285.942208] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [285.947265] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [285.947297] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [285.947318] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [285.948625] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [285.948988] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [285.949498] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [285.949993] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [285.950009] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [285.950486] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [285.954043] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [285.954058] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [285.954478] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [285.954498] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? yes

<7> [285.954512] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no

<7> [285.954523] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no

<7> [285.954534] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no

<7> [285.954546] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no

<7> [285.954625] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [285.954666] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] found preferred mode: 3200x1800

<7> [285.954677] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config

<7> [285.955332] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:58:pipe A] desired mode 3200x1800 set (0,0)

<7> [285.956079] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [285.957081] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [285.957097] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [285.957827] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [285.958111] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [285.958459] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [285.958905] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [285.958918] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [285.958927] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [285.958981] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no

<7> [285.959353] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [285.959822] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [285.962353] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes:

<7> [285.962417] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [285.962431] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [285.962570] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [285.962583] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [285.967108] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [285.967238] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [285.967250] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [285.968233] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [285.968783] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [285.969320] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [285.969407] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [285.969758] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [285.969770] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [285.969812] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [285.970033] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [285.970186] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [285.970582] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [285.970982] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [285.971909] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [285.972304] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [285.972705] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [285.973081] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [285.973866] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [285.973881] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [285.974172] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [285.974264] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [285.974272] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [285.978972] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [285.979108] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [285.979121] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [285.979821] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [285.980186] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [285.980798] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [285.981196] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [285.981208] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [285.981578] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [285.986717] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [285.986736] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [285.987016] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [285.992907] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [285.992921] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [285.997272] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [285.998272] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [285.998287] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [285.998966] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [285.999320] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [285.999869] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [286.000208] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [286.000220] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [286.000527] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [286.003740] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [286.003756] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [286.004171] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [286.005138] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [286.005153] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [286.009847] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [286.010785] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [286.010800] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [286.011497] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [286.011857] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [286.012415] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [286.012710] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [286.012718] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [286.012931] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<6> [286.017507] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input40

<7> [286.021849] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [286.021865] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [286.022297] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [286.023117] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [286.023131] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [286.024085] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [286.024550] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [286.024905] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [286.025329] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [286.025342] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [286.025349] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [286.026338] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no

<7> [286.026924] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [286.027304] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [286.028720] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes:

<7> [286.028735] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [286.028746] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [286.028904] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [286.028917] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [286.033433] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [286.033520] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [286.033533] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [286.034171] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [286.036419] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [286.037012] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [286.037449] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [286.037461] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [286.037821] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [286.041169] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [286.041181] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [286.041690] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [286.041743] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [286.041755] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<6> [286.042849] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input41

<6> [286.045178] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input42

<7> [286.047844] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [286.047900] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [286.047912] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [286.048515] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [286.048758] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [286.049163] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [286.049499] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [286.049510] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [286.049760] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [286.052820] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [286.052834] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [286.053244] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [286.055170] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:143]

<7> [287.103334] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:58:pipe A]

<7> [287.103542] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [287.103831] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [287.104074] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [287.104317] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [287.104579] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [287.104851] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [287.105092] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [287.105334] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [287.105623] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [287.105885] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [287.106127] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [287.106390] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [287.106652] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [287.106892] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [287.107134] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [287.107392] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [287.107654] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [287.107895] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [287.108136] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [287.108395] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [287.108658] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [287.108900] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [287.109141] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [287.109433] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [287.109687] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [287.109928] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [287.110169] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [287.110437] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [287.110699] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [287.110939] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [287.111187] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [287.111436] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [287.111719] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [287.111953] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [287.112186] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [287.112442] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [287.112743] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [287.113017] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [287.113250] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [287.113524] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset

<7> [287.113888] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:58:pipe A] releasing DPLL 0

<7> [287.114194] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [287.114476] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [287.114752] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [287.114990] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [287.115214] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [287.115460] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [287.115754] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [287.116046] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [287.116312] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz

<7> [287.116608] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [287.116883] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [287.117112] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [287.117345] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [modeset]

<7> [287.117645] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no

<7> [287.117937] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [287.118169] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no

<7> [287.118655] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [287.120079] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [287.196060] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [287.326724] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 0

<7> [287.328595] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [287.349693] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power off

<7> [287.350544] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [287.351411] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - short

<7> [287.353099] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [287.355083] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [287.406022] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [287.407001] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long

<7> [287.407896] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [287.409623] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [287.411293] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [287.413016] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [287.413419] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:58:pipe A]

<7> [287.415808] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [287.415996] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [287.417450] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [287.420433] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A]

<7> [287.421926] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B]

<7> [287.423252] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A]

<7> [287.424592] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B]

<7> [287.425562] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C]

<7> [287.426895] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C]

<7> [287.428385] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A]

<7> [287.429706] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B]

<7> [287.431013] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C]

<7> [287.432328] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1]

<7> [287.434435] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [287.438005] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:83:pipe B]

<7> [287.439522] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:108:pipe C]

<7> [287.543024] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [287.544667] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [287.546198] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [287.548063] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [287.552992] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [287.573467] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [287.657232] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:110:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [287.658630] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:109:DDI A/PHY A][CRTC:58:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [287.659709] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000

<7> [287.661246] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [287.663569] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:109:DDI A/PHY A] [CRTC:58:pipe A]

<7> [287.664892] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [287.666479] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [287.667977] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [287.669577] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [287.671009] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [287.672478] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [287.673969] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [287.675417] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [287.676926] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [287.678323] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [287.679706] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [287.681079] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [287.682459] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [287.683846] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [287.685216] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [287.686597] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [287.688000] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [287.689406] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [287.690796] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [287.692173] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [287.693556] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [287.694936] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [287.696322] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [287.697720] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [287.699072] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [287.700446] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [287.701830] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [287.703204] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [287.704588] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [287.705973] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [287.707391] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [287.708773] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [287.710154] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [287.711545] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [287.712947] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [287.714319] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [287.715700] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [287.717091] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [287.718481] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [287.719862] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset

<7> [287.721511] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [287.722872] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [287.724217] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [287.725540] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [287.726886] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [287.728229] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [287.729586] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [287.731250] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [287.732795] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [287.734184] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [287.735561] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [287.736933] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [287.738383] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:58:pipe A] allocated DPLL 0

<7> [287.739766] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:58:pipe A] reserving DPLL 0

<7> [287.741178] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: yes [modeset]

<7> [287.742553] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [287.743946] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [287.745316] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [287.746702] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [287.748079] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [287.749462] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [287.750857] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [287.752236] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [287.753612] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [287.755023] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [287.756420] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [287.757795] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [287.759167] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [287.760545] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [287.761907] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [287.763299] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [287.764666] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [287.766031] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [287.767452] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [287.768592] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [287.769501] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [287.770418] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [287.771301] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [287.772216] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [287.773123] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [287.774049] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [287.775015] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [287.776009] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [287.776934] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [287.777658] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [287.778324] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [287.779017] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [287.779699] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [287.780411] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [287.780940] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [287.781477] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [287.782120] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [287.782791] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [287.783457] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [287.784098] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [287.784744] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [287.785421] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [287.786079] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [287.786637] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:111] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [287.787171] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [287.787723] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [287.788255] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [287.788803] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no

<7> [287.801425] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [287.810482] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [287.811097] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [287.812072] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [287.812857] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [287.813638] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [287.814825] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A]

<7> [287.815191] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B]

<7> [287.815555] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A]

<7> [287.815893] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B]

<7> [287.816234] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C]

<7> [287.816598] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C]

<7> [287.816939] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A]

<7> [287.817277] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B]

<7> [287.817631] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C]

<7> [287.818231] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:58:pipe A]

<7> [287.818622] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [287.819229] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power on

<7> [287.819704] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (92 ms remaining)

<7> [287.918666] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [287.987217] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [287.988431] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power on

<7> [287.989551] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003

<7> [288.039021] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [288.040131] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long

<7> [288.041146] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [288.042246] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [288.193747] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [288.195057] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [288.196420] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [288.199851] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD on

<7> [288.201607] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b

<7> [288.208785] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [288.210042] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [288.213724] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [288.215411] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [288.216952] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [288.220931] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Clock recovery OK

<7> [288.222451] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [288.223961] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [288.228297] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [288.229826] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [288.231220] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [288.234586] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [288.235586] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [288.237624] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [288.240105] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [288.241266] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [288.242889] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 37

<7> [288.246930] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 307 us, max time under evasion is 250 us

<7> [288.256071] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [288.261758] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1]

<7> [288.263049] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [288.269464] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [288.271779] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [288.277298] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [288.278936] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [288.280691] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [288.282857] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [288.284976] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [288.285021] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [288.286789] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [288.293123] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [288.293174] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [288.294950] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [288.300914] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [288.302979] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [288.304513] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [288.306154] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [288.307783] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [288.307828] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [288.309287] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [288.315681] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [288.315729] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [288.422967] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [288.423780] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [288.435521] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [288.461051] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [288.461457] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [288.474513] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [288.531508] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [288.532576] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [288.540270] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [288.540915] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [288.541268] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [288.544165] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [288.544712] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [288.545273] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [288.545847] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [288.546716] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [288.547275] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [288.548953] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [288.638666] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [288.639886] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [288.640768] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [288.641606] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<6> [288.646794] Console: switching to colour dummy device 80x25

<7> [288.647165] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:111] is removed

<7> [288.647452] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [288.648276] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [288.651753] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [288.652652] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [288.654007] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [288.655247] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [288.672985] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [288.673953] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [288.674811] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [288.675670] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [288.677179] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [288.678288] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [288.679084] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [288.679802] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [288.680560] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [288.681253] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [288.681995] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [288.682777] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [288.683505] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [288.684202] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [288.684978] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [288.685745] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [288.686304] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [288.686878] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [288.687624] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [288.688129] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [288.688665] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [288.689320] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [288.689862] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [288.690590] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [288.691186] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [288.691906] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [288.692587] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [288.693092] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [288.693665] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [288.694218] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [288.694770] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [288.695310] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [288.695940] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [288.696548] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [288.697053] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [288.697655] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [288.698279] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [288.698864] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [288.699448] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [288.699953] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [288.700511] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset

<7> [288.701050] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:58:pipe A] releasing DPLL 0

<7> [288.701722] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [288.702286] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [288.703000] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [288.703534] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [288.704113] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [288.704668] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [288.705213] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [modeset]

<7> [288.706037] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no

<7> [288.706849] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [288.707661] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no

<7> [288.709475] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [288.918700] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 0

<7> [288.921155] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [288.943400] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power off

<7> [288.943842] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [288.944417] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [288.945209] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - short

<7> [288.945786] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [288.996607] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [288.997673] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long

<7> [288.998683] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [289.004457] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [289.007792] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [289.007840] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:58:pipe A]

<7> [289.009625] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [289.010109] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [289.012078] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [289.016089] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A]

<7> [289.018091] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B]

<7> [289.019195] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A]

<7> [289.020917] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B]

<7> [289.022673] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C]

<7> [289.024408] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C]

<7> [289.026186] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A]

<7> [289.027831] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B]

<7> [289.029121] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C]

<7> [289.030914] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1]

<7> [289.034618] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [289.094423] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [289.138170] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:110:eDP-1] removing connector from sysfs

<7> [289.150198] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:118:DP-1] removing connector from sysfs

<7> [289.153750] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:127:HDMI-A-1] removing connector from sysfs

<7> [289.169999] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:133:DP-2] removing connector from sysfs

<7> [289.175247] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:139:HDMI-A-2] removing connector from sysfs

<7> [289.209519] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (297 ms remaining)

<7> [289.510845] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [289.590782] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<6> [290.162280] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS

<6> [290.163474] [IGT] i915_pm_rpm: exiting, ret=0

Results for igt@i915_pm_rpm@module-reload