Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.36 seconds
Igt-Version 
IGT-Version: 2.3-g100eb9cb5 (x86_64) (Linux: 6.19.0-next-20260219-next-20260219-g44982d352c33+ x86_64)
Out 
Using IGT_SRANDOM=1771507980 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.356s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.356s)
Dmesg
<7> [261.295245] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_TC1
<6> [261.300683] Console: switching to colour dummy device 80x25
<6> [261.300919] [IGT] kms_force_connector_basic: executing
<7> [261.307904] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [261.309161] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [261.330500] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [261.332305] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:527:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [261.332317] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [261.332325] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [261.336576] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] disconnected
<7> [261.336601] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [261.336604] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [261.340835] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] disconnected
<7> [261.340868] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [261.340870] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [261.345054] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] disconnected
<6> [261.345331] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [261.345609] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:527:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [261.345614] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [261.345617] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [261.404761] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [261.410664] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [261.410683] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [261.410867] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [261.416340] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [261.416346] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [261.416469] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] status updated from disconnected to connected
<7> [261.416506] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] probed modes:
<7> [261.416508] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [261.416511] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [261.416514] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [261.416516] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [261.416519] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [261.416548] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [261.416551] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [261.418198] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [261.418309] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [261.476227] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [261.481961] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [261.481976] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [261.482105] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [261.487675] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [261.487683] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [261.487956] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] probed modes:
<7> [261.487960] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [261.487964] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [261.487967] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [261.487970] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [261.487974] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [261.488126] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:527:HDMI-A-1] EDID override set
<7> [261.488147] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [261.488150] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [261.488330] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:527:HDMI-A-1] ELD monitor IGT
<7> [261.488332] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:527:HDMI-A-1] ELD size 24, SAD count 0
<7> [261.546795] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [261.552563] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [261.552665] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [261.552672] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [261.552676] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] probed modes:
<7> [261.552679] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [261.552681] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [261.552684] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [261.552686] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [261.552688] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [261.552691] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [261.552781] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:527:HDMI-A-1] EDID override set
<7> [261.552797] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [261.552799] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [261.552957] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:527:HDMI-A-1] ELD monitor IGT
<7> [261.552960] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:527:HDMI-A-1] ELD size 24, SAD count 0
<7> [261.552962] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:527:HDMI-A-1] EDID changed, epoch counter 4
<7> [261.613759] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [261.619544] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [261.619771] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [261.619781] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] probed modes:
<7> [261.619785] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [261.619790] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [261.619794] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [261.619798] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [261.619802] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [261.619917] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:527:HDMI-A-1] EDID override reset
<7> [261.619940] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [261.619943] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [261.681224] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [261.686957] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [261.686969] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [261.687174] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [261.692694] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [261.692700] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [261.692817] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:527:HDMI-A-1] EDID changed, epoch counter 5
<7> [261.692852] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [261.692857] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [261.692860] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] probed modes:
<7> [261.692863] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [261.692866] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [261.692869] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [261.692871] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [261.692873] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [261.692978] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:527:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [261.692981] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [261.692984] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [261.697225] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] status updated from connected to disconnected
<7> [261.697233] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] disconnected
<7> [261.697262] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [261.697265] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [261.697430] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [261.697474] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [261.701500] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] disconnected
<6> [261.701805] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [261.702210] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [261.703312] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:506:eDP-1] force updated from 0 to 0 or reprobing
<7> [261.703317] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1]
<7> [261.703321] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:506:eDP-1]
<7> [261.703926] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [261.704436] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [261.704575] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [261.704709] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [261.704855] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [261.704858] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD monitor
<7> [261.704861] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD size 20, SAD count 0
<7> [261.704872] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] VRR capable: no
<7> [261.705008] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [261.705140] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [261.705934] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] probed modes:
<7> [261.705938] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [261.705960] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1]
<7> [261.705963] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:506:eDP-1]
<7> [261.706533] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [261.706938] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [261.707072] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [261.707216] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [261.707363] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [261.707365] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD monitor
<7> [261.707367] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD size 20, SAD count 0
<7> [261.707376] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] VRR capable: no
<7> [261.707507] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [261.707635] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [261.708668] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] probed modes:
<7> [261.708671] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [261.708743] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:506:eDP-1] EDID override reset
<7> [261.708756] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1]
<7> [261.708759] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:506:eDP-1]
<7> [261.709328] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [261.709819] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [261.709953] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [261.710084] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [261.710248] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [261.710251] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD monitor
<7> [261.710253] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD size 20, SAD count 0
<7> [261.710261] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] VRR capable: no
<7> [261.710393] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [261.710523] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [261.711548] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] probed modes:
<7> [261.711551] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [261.711625] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:515:DP-1] EDID override reset
<7> [261.711636] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:DP-1]
<7> [261.711639] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:515:DP-1]
<7> [261.715831] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:DP-1] disconnected
<7> [261.715935] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:527:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [261.715939] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [261.715942] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [261.720137] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] disconnected
<7> [261.720162] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [261.720165] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [261.724402] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] disconnected
<7> [261.724468] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:527:HDMI-A-1] EDID override reset
<7> [261.724480] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [261.724483] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [261.728705] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] disconnected
<7> [261.728774] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:533:DP-2] EDID override reset
<7> [261.728784] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2]
<7> [261.728787] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:533:DP-2]
<7> [261.729226] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_TC1
<7> [261.751629] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [261.773380] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [261.795130] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [261.816946] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [261.838743] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [261.860480] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [261.882230] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [261.903981] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [261.925745] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [261.947478] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [261.969232] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [261.990983] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.012736] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.034484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.056235] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.078018] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.099802] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.121618] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.143368] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.165120] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.186936] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.208732] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.230468] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.231338] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [262.231349] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [262.231352] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [262.252222] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.273971] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.295753] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.317505] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.339222] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.360972] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.383052] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.404869] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.426652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.426840] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -110
<7> [262.426859] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] disconnected
<7> [262.426959] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:542:DP-3] EDID override reset
<7> [262.426980] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3]
<7> [262.426986] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:542:DP-3]
<7> [262.427321] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_TC1
<7> [262.427859] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [262.428255] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3] disconnected
<7> [262.428333] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:551:DP-4] EDID override reset
<7> [262.428344] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:DP-4]
<7> [262.428346] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:551:DP-4]
<7> [262.428584] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [262.428859] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:DP-4] disconnected
<7> [262.428952] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:560:DP-5] EDID override reset
<7> [262.428966] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:560:DP-5]
<7> [262.428970] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:560:DP-5]
<7> [262.429300] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [262.429539] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:560:DP-5] disconnected
<6> [262.430101] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [262.430622] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [262.442701] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [262.442706] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [262.442747] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1]
<7> [262.442751] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:506:eDP-1]
<7> [262.443380] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [262.443957] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [262.444118] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [262.444265] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [262.444408] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [262.444411] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD monitor
<7> [262.444413] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD size 20, SAD count 0
<7> [262.444423] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] VRR capable: no
<7> [262.444553] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [262.444681] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [262.445922] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] probed modes:
<7> [262.445926] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [262.445930] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:DP-1]
<7> [262.445933] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:515:DP-1]
<7> [262.450142] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:DP-1] disconnected
<7> [262.450147] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [262.450150] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [262.454364] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] disconnected
<7> [262.454368] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2]
<7> [262.454372] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:533:DP-2]
<7> [262.454839] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_TC1
<7> [262.477578] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.499365] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.521312] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.543217] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.565106] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.586922] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.608672] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.630391] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.652115] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.673891] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.695609] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.717327] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.739045] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.760830] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.782582] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.804329] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.826081] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.847830] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.869548] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.891299] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.913049] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.934801] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.956551] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [262.978301] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [263.000051] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [263.021835] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [263.043585] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [263.065303] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [263.087053] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [263.108804] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [263.130529] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [263.152272] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [263.152452] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -110
<7> [263.152471] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] disconnected
<7> [263.152477] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3]
<7> [263.152481] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:542:DP-3]
<7> [263.152857] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3] disconnected
<7> [263.152862] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:DP-4]
<7> [263.152867] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:551:DP-4]
<7> [263.153315] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:DP-4] disconnected
<7> [263.153318] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:560:DP-5]
<7> [263.153322] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:560:DP-5]
<7> [263.153637] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:560:DP-5] disconnected
<7> [263.153640] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:eDP-1] enabled? yes
<7> [263.153646] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:515:DP-1] enabled? no
<7> [263.153648] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:527:HDMI-A-1] enabled? no
<7> [263.153650] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:DP-2] enabled? no
<7> [263.153653] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:DP-3] enabled? no
<7> [263.153655] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:551:DP-4] enabled? no
<7> [263.153658] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:560:DP-5] enabled? no
<7> [263.153687] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [263.153707] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:eDP-1] found preferred mode: 2880x1800
<7> [263.153710] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7> [263.153736] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0)
<7> [263.165598] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [263.176600] Console: switching to colour frame buffer device 180x56
Created at 2026-02-19 16:25:31