<5>[ 0.000000] Linux version 6.19.0-next-20260216-next-20260216-g350adaf7fde9+ (kbuild@gfx-ci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Mon Feb 16 15:53:29 UTC 2026 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/sda2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <6>[ 0.000000] KERNEL supported cpus: <6>[ 0.000000] Intel GenuineIntel <6>[ 0.000000] AMD AuthenticAMD <6>[ 0.000000] Hygon HygonGenuine <6>[ 0.000000] Centaur CentaurHauls <6>[ 0.000000] zhaoxin Shanghai <4>[ 0.000000] x86/CPU: Running old microcode <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] System RAM <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] device reserved <6>[ 0.000000] BIOS-e820: [gap 0x00000000000a0000-0x00000000000e7fff] <6>[ 0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] device reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dd7a163f] System RAM <6>[ 0.000000] BIOS-e820: [mem 0x00000000dd7a1640-0x00000000dd7a369f] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x00000000dd7a36a0-0x00000000dfffffff] device reserved <6>[ 0.000000] BIOS-e820: [gap 0x00000000e0000000-0x00000000f3ffffff] <6>[ 0.000000] BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] device reserved <6>[ 0.000000] BIOS-e820: [gap 0x00000000f8000000-0x00000000febfffff] <6>[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fed3ffff] device reserved <6>[ 0.000000] BIOS-e820: [gap 0x00000000fed40000-0x00000000fed44fff] <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed45000-0x00000000ffffffff] device reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011bffffff] System RAM <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] APIC: Static calls initialized <6>[ 0.000000] SMBIOS 2.6 present. <6>[ 0.000000] DMI: Hewlett-Packard HP Compaq 8000 Elite CMT PC/3647h, BIOS 786G7 v01.02 10/22/2009 <6>[ 0.000000] DMI: Memory slots populated: 5/5 <6>[ 0.000000] tsc: Fast TSC calibration using PIT <6>[ 0.000000] tsc: Detected 2926.296 MHz processor <7>[ 0.001667] e820: update [mem 0x00000000-0x00000fff] System RAM ==> device reserved <7>[ 0.001671] e820: remove [mem 0x000a0000-0x000fffff] System RAM <6>[ 0.001677] last_pfn = 0x11c000 max_arch_pfn = 0x400000000 <6>[ 0.001689] total RAM covered: 7640M <6>[ 0.001911] Found optimal setting for mtrr clean up <6>[ 0.001912] gran_size: 64K chunk_size: 1G num_reg: 5 lose cover RAM: 0G <6>[ 0.001918] MTRR map: 8 entries (5 fixed + 3 variable; max 19), built from 7 variable MTRRs <6>[ 0.001920] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <7>[ 0.002816] e820: update [mem 0xdd800000-0xffffffff] System RAM ==> device reserved <6>[ 0.002825] last_pfn = 0xdd7a1 max_arch_pfn = 0x400000000 <6>[ 0.011618] found SMP MP-table at [mem 0x000f9bf0-0x000f9bff] <6>[ 0.015394] printk: log buffer data + meta data: 1048576 + 4456448 = 5505024 bytes <6>[ 0.015400] printk: early log buf free: 259160(98%) <6>[ 0.015406] ACPI: Early table checksum verification disabled <6>[ 0.015416] ACPI: RSDP 0x00000000000E5810 000014 (v00 COMPAQ) <6>[ 0.015421] ACPI: RSDT 0x00000000DD7C5740 000040 (v01 HPQOEM SLIC-BPC 20091022 00000000) <6>[ 0.015429] ACPI: FACP 0x00000000DD7C57E8 000074 (v01 COMPAQ EAGLLAKE 00000001 00000000) <4>[ 0.015435] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Address but zero Length: 0x0000000000000050/0x0 (20251212/tbfadt-611) <4>[ 0.015439] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 0, using default 8 (20251212/tbfadt-665) <6>[ 0.015443] ACPI: DSDT 0x00000000DD7C5D27 00A48C (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E) <6>[ 0.015448] ACPI: FACS 0x00000000DD7C5700 000040 <6>[ 0.015451] ACPI: APIC 0x00000000DD7C585C 000084 (v01 COMPAQ EAGLLAKE 00000001 00000000) <6>[ 0.015455] ACPI: ASF! 0x00000000DD7C58E0 000063 (v32 COMPAQ EAGLLAKE 00000001 00000000) <6>[ 0.015460] ACPI: MCFG 0x00000000DD7C5943 00003C (v01 COMPAQ EAGLLAKE 00000001 00000000) <6>[ 0.015464] ACPI: TCPA 0x00000000DD7C597F 000032 (v01 COMPAQ EAGLLAKE 00000001 00000000) <6>[ 0.015468] ACPI: SLIC 0x00000000DD7C59B1 000176 (v01 HPQOEM SLIC-BPC 00000001 00000000) <6>[ 0.015472] ACPI: HPET 0x00000000DD7C5B27 000038 (v01 COMPAQ EAGLLAKE 00000001 00000000) <6>[ 0.015475] ACPI: Reserving FACP table memory at [mem 0xdd7c57e8-0xdd7c585b] <6>[ 0.015477] ACPI: Reserving DSDT table memory at [mem 0xdd7c5d27-0xdd7d01b2] <6>[ 0.015479] ACPI: Reserving FACS table memory at [mem 0xdd7c5700-0xdd7c573f] <6>[ 0.015480] ACPI: Reserving APIC table memory at [mem 0xdd7c585c-0xdd7c58df] <6>[ 0.015481] ACPI: Reserving ASF! table memory at [mem 0xdd7c58e0-0xdd7c5942] <6>[ 0.015482] ACPI: Reserving MCFG table memory at [mem 0xdd7c5943-0xdd7c597e] <6>[ 0.015483] ACPI: Reserving TCPA table memory at [mem 0xdd7c597f-0xdd7c59b0] <6>[ 0.015485] ACPI: Reserving SLIC table memory at [mem 0xdd7c59b1-0xdd7c5b26] <6>[ 0.015486] ACPI: Reserving HPET table memory at [mem 0xdd7c5b27-0xdd7c5b5e] <6>[ 0.015646] No NUMA configuration found <6>[ 0.015648] Faking a node at [mem 0x0000000000000000-0x000000011bffffff] <6>[ 0.015671] NODE_DATA(0) allocated [mem 0x11ba92e40-0x11babdfff] <6>[ 0.015998] Reserving Intel graphics memory at [mem 0xde000000-0xdfffffff] <6>[ 0.016113] ACPI: PM-Timer IO Port: 0xf808 <6>[ 0.016121] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) <6>[ 0.016124] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) <6>[ 0.016125] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) <6>[ 0.016126] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) <6>[ 0.016148] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 <6>[ 0.016152] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.016155] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.016161] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.016162] ACPI: HPET id: 0x8086a201 base: 0xfed00000 <6>[ 0.016172] CPU topo: Max. logical packages: 1 <6>[ 0.016173] CPU topo: Max. logical dies: 1 <6>[ 0.016174] CPU topo: Max. dies per package: 1 <6>[ 0.016179] CPU topo: Max. threads per core: 1 <6>[ 0.016180] CPU topo: Num. cores per package: 2 <6>[ 0.016181] CPU topo: Num. threads per package: 2 <6>[ 0.016181] CPU topo: Allowing 2 present CPUs plus 0 hotplug CPUs <6>[ 0.016208] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.016211] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.016213] PM: hibernation: Registered nosave memory: [mem 0xdd7a1000-0xffffffff] <6>[ 0.016217] [gap 0xe0000000-0xf3ffffff] available for PCI devices <6>[ 0.016219] Booting paravirtualized kernel on bare hardware <6>[ 0.016223] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.016283] Zone ranges: <6>[ 0.016284] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.016286] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.016288] Normal [mem 0x0000000100000000-0x000000011bffffff] <6>[ 0.016290] Device empty <6>[ 0.016291] Movable zone start for each node <6>[ 0.016294] Early memory node ranges <6>[ 0.016295] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.016296] node 0: [mem 0x0000000000100000-0x00000000dd7a0fff] <6>[ 0.016298] node 0: [mem 0x0000000100000000-0x000000011bffffff] <6>[ 0.016300] Initmem setup node 0 [mem 0x0000000000001000-0x000000011bffffff] <6>[ 0.016315] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.016413] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.042048] On node 0, zone Normal: 10335 pages in unavailable ranges <6>[ 0.042452] On node 0, zone Normal: 16384 pages in unavailable ranges <6>[ 0.042476] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 <6>[ 0.043522] percpu: Embedded 87 pages/cpu s233472 r8192 d114688 u1048576 <7>[ 0.043535] pcpu-alloc: s233472 r8192 d114688 u1048576 alloc=1*2097152 <7>[ 0.043540] pcpu-alloc: [0] 0 1 <5>[ 0.043574] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/sda2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <7>[ 0.043866] blacklisting initcall simpledrm_platform_driver_init <6>[ 0.045433] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) <6>[ 0.046280] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 0.046362] software IO TLB: area num 2. <6>[ 0.098826] Fallback order for Node 0: 0 <6>[ 0.098840] Built 1 zonelists, mobility grouping on. Total pages: 1021759 <6>[ 0.098842] Policy zone: Normal <6>[ 0.098876] mem auto-init: stack:off, heap alloc:on, heap free:off <6>[ 0.098878] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.098889] stackdepot hash table entries: 262144 (order: 10, 4194304 bytes, linear) <6>[ 0.100516] stackdepot: allocating space for 8192 stack pools via memblock <4>[ 0.133159] ********************************************************** <4>[ 0.133165] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.133166] ** ** <4>[ 0.133167] ** This system shows unhashed kernel memory addresses ** <4>[ 0.133168] ** via the console, logs, and other interfaces. This ** <4>[ 0.133168] ** might reduce the security of your system. ** <4>[ 0.133169] ** ** <4>[ 0.133170] ** If you see this message and you are not debugging ** <4>[ 0.133170] ** the kernel, report this immediately to your system ** <4>[ 0.133171] ** administrator! ** <4>[ 0.133172] ** ** <4>[ 0.133172] ** Use hash_pointers=always to force this mode off ** <4>[ 0.133173] ** ** <4>[ 0.133174] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.133174] ********************************************************** <6>[ 0.145325] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 <6>[ 0.147230] Kernel/User page tables isolation: enabled <6>[ 0.169564] ftrace: allocating 61347 entries in 240 pages <6>[ 0.169572] ftrace: allocated 240 pages with 4 groups <6>[ 0.172787] Dynamic Preempt: lazy <6>[ 0.173873] Running RCU self tests <6>[ 0.173874] Running RCU synchronous self tests <6>[ 0.173875] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.173876] rcu: RCU lockdep checking is enabled. <6>[ 0.173877] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2. <6>[ 0.173880] Trampoline variant of Tasks RCU enabled. <6>[ 0.173880] Rude variant of Tasks RCU enabled. <6>[ 0.173881] Tracing variant of Tasks RCU enabled. <6>[ 0.173882] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.173883] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 <6>[ 0.174028] Running RCU synchronous self tests <6>[ 0.174045] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. <6>[ 0.174052] RCU Tasks Rude: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. <6>[ 0.213520] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16 <6>[ 0.214465] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.216825] Console: colour VGA+ 80x25 <6>[ 0.216846] printk: legacy console [tty0] enabled <6>[ 0.227053] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <6>[ 0.227143] ... MAX_LOCKDEP_SUBCLASSES: 8 <6>[ 0.227198] ... MAX_LOCK_DEPTH: 48 <6>[ 0.227792] ... MAX_LOCKDEP_KEYS: 8192 <6>[ 0.227848] ... CLASSHASH_SIZE: 4096 <6>[ 0.227904] ... MAX_LOCKDEP_ENTRIES: 524288 <6>[ 0.227960] ... MAX_LOCKDEP_CHAINS: 524288 <6>[ 0.228016] ... CHAINHASH_SIZE: 262144 <6>[ 0.228073] memory used by lock dependency info: 54145 kB <6>[ 0.228133] memory used for stack traces: 4224 kB <6>[ 0.228191] per task-struct memory footprint: 1920 bytes <6>[ 0.228507] ACPI: Core revision 20251212 <6>[ 0.229432] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns <6>[ 0.229581] APIC: Switch to symmetric I/O mode setup <6>[ 0.230549] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 <6>[ 0.235555] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2a2e4c091a1, max_idle_ns: 440795295517 ns <6>[ 0.235677] Calibrating delay loop (skipped), value calculated using timer frequency.. 5852.59 BogoMIPS (lpj=2926296) <3>[ 0.235798] x86/cpu: VMX (outside TXT) disabled by BIOS <6>[ 0.235865] CPU0: Thermal monitoring enabled (TM2) <6>[ 0.236009] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 <6>[ 0.236072] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 <6>[ 0.236143] process: using mwait in idle threads <6>[ 0.236208] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto <6>[ 0.236318] Speculative Store Bypass: Vulnerable <6>[ 0.236378] Spectre V2 : Mitigation: Retpolines <6>[ 0.236435] MDS: Vulnerable: Clear CPU buffers attempted, no microcode <6>[ 0.236502] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 0.236662] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT <6>[ 0.236764] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 0.236851] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 0.236917] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format. <6>[ 0.284551] Freeing SMP alternatives memory: 56K <6>[ 0.284627] pid_max: default: 32768 minimum: 301 <6>[ 0.285938] landlock: Up and running. <6>[ 0.285992] Yama: becoming mindful. <6>[ 0.286731] AppArmor: AppArmor initialized <6>[ 0.287752] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 0.287855] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 0.289181] VFS: Finished mounting rootfs on nullfs <6>[ 0.292665] Running RCU synchronous self tests <6>[ 0.292723] Running RCU synchronous self tests <6>[ 0.396154] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz (family: 0x6, model: 0x17, stepping: 0xa) <6>[ 0.397899] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver. <6>[ 0.398020] ... version: 2 <6>[ 0.398073] ... bit width: 40 <6>[ 0.398126] ... generic counters: 2 <6>[ 0.398178] ... generic bitmap: 0000000000000003 <6>[ 0.398235] ... fixed-purpose counters: 3 <6>[ 0.398287] ... fixed-purpose bitmap: 0000000000000007 <6>[ 0.398344] ... value mask: 000000ffffffffff <6>[ 0.398401] ... max period: 000000007fffffff <6>[ 0.398459] ... global_ctrl mask: 0000000700000003 <6>[ 0.398965] signal: max sigframe size: 1520 <6>[ 0.399378] rcu: Hierarchical SRCU implementation. <6>[ 0.399434] rcu: Max phase no-delay instances is 400. <6>[ 0.400197] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level <6>[ 0.407526] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 0.408033] smp: Bringing up secondary CPUs ... <6>[ 0.409633] smpboot: x86: Booting SMP configuration: <6>[ 0.409682] .... node #0, CPUs: #1 <6>[ 0.410949] smp: Brought up 1 node, 2 CPUs <6>[ 0.411663] smpboot: Total of 2 processors activated (11705.18 BogoMIPS) <6>[ 0.415002] Memory: 3809304K/4087036K available (25875K kernel code, 5823K rwdata, 9688K rodata, 5764K init, 67916K bss, 265808K reserved, 0K cma-reserved) <6>[ 0.416846] devtmpfs: initialized <6>[ 0.417493] x86/mm: Memory block size: 128MB <6>[ 0.433815] ACPI: PM: Registering ACPI NVS region [mem 0xdd7a1640-0xdd7a369f] (8288 bytes) <6>[ 0.433928] reboot: HP Compaq Laptop series board detected. Selecting BIOS-method for reboots. <6>[ 0.435332] Running RCU synchronous self tests <6>[ 0.435404] Running RCU synchronous self tests <6>[ 0.435803] Running RCU Tasks wait API self tests <6>[ 0.435803] Running RCU Tasks Rude wait API self tests <6>[ 0.435803] Running RCU Tasks Trace wait API self tests <6>[ 0.435818] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.435866] posixtimers hash table entries: 1024 (order: 5, 73728 bytes, linear) <6>[ 0.436007] futex hash table entries: 512 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear). <6>[ 0.439968] PM: RTC time: 15:58:12, date: 2026-02-16 <6>[ 0.442683] Callback from call_rcu_tasks_trace() invoked. <6>[ 0.443096] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.446058] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.446302] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.446561] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 0.446878] audit: initializing netlink subsys (disabled) <5>[ 0.447749] audit: type=2000 audit(1771257492.217:1): state=initialized audit_enabled=0 res=1 <6>[ 0.450586] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.450591] thermal_sys: Registered thermal governor 'bang_bang' <6>[ 0.450653] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.450725] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.450785] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.450955] cpuidle: using governor ladder <6>[ 0.450955] cpuidle: using governor menu <6>[ 0.451087] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 0.453357] PCI: ECAM [mem 0xf4000000-0xf7ffffff] (base 0xf4000000) for domain 0000 [bus 00-3f] <6>[ 0.453450] PCI: ECAM [mem 0xf4000000-0xf7ffffff] reserved as E820 entry <6>[ 0.453556] PCI: Using configuration type 1 for base access <6>[ 0.454073] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.463767] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.463840] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.486686] raid6: skipped pq benchmark and selected sse2x4 <6>[ 0.486762] raid6: using ssse3x2 recovery algorithm <6>[ 0.491118] ACPI: Added _OSI(Module Device) <6>[ 0.491175] ACPI: Added _OSI(Processor Device) <6>[ 0.491229] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 0.591323] ACPI: 1 ACPI AML tables successfully acquired and loaded <6>[ 0.600541] ACPI: \_SB_: platform _OSC: OS support mask [006e7eff] <6>[ 0.602776] ACPI: Dynamic OEM Table Load: <6>[ 0.602842] ACPI: SSDT 0xFFFF888101832800 0003AC (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E) <6>[ 0.610554] ACPI: Dynamic OEM Table Load: <6>[ 0.610619] ACPI: SSDT 0xFFFF888101830400 0002B0 (v01 COMPAQ CST 00000001 MSFT 0100000E) <6>[ 0.624720] ACPI: Interpreter enabled <6>[ 0.624976] ACPI: PM: (supports S0 S3 S4 S5) <6>[ 0.625031] ACPI: Using IOAPIC for interrupt routing <6>[ 0.627388] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 0.627476] PCI: Using E820 reservations for host bridge windows <6>[ 0.630664] ACPI: Enabled 11 GPEs in block 00 to 3F <6>[ 0.646722] Callback from call_rcu_tasks() invoked. <3>[ 0.803904] acpi LNXCPU:00: Invalid PBLK length [7] <3>[ 0.804184] acpi LNXCPU:01: Invalid PBLK length [7] <6>[ 0.810219] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) <6>[ 0.810311] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] <3>[ 0.810483] ACPI BIOS Error (bug): \_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20251212/nsarguments-162) <3>[ 0.812117] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0._OSC.CAPD], AE_ALREADY_EXISTS (20251212/dsfield-184) <3>[ 0.812272] ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20251212/dswload2-477) <5>[ 0.812428] Initialized Local Variables for Method [_OSC]: <5>[ 0.812505] Local0: ffff888101f017e8 Integer 0000000000000001 <5>[ 0.812595] Local1: ffff888101f01008 Integer 0000000000000005 <5>[ 0.812706] Initialized Arguments for Method [_OSC]: (5 arguments defined for method invocation) <5>[ 0.812790] Arg0: ffff888101f013f8 Buffer(16) 5B 4D DB 33 F7 1F 1C 40 <5>[ 0.812895] Arg1: ffff888101f012a8 Integer 0000000000000001 <5>[ 0.812982] Arg2: ffff888101f010b0 Integer 0000000000000003 <5>[ 0.813069] Arg3: ffff888101f014a0 Buffer(12) 01 00 00 00 9F 01 00 00 <3>[ 0.813241] ACPI Error: Aborting method \_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20251212/psparse-529) <6>[ 0.813466] acpi PNP0A08:00: _OSC: OS requested [SHPCHotplug PME AER PCIeCapability LTR DPC] <6>[ 0.813552] acpi PNP0A08:00: _OSC: platform willing to grant [SHPCHotplug PME AER PCIeCapability LTR DPC] <6>[ 0.813663] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_ERROR) <6>[ 0.813904] acpi PNP0A08:00: [Firmware Info]: ECAM [mem 0xf4000000-0xf7ffffff] for domain 0000 [bus 00-3f] only partially covers this bridge <6>[ 0.824864] PCI host bridge to bus 0000:00 <6>[ 0.825536] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfebfffff window] <6>[ 0.825625] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 0.825681] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] <6>[ 0.825751] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 0.825838] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf3ffffff window] <6>[ 0.825924] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] <6>[ 0.826014] pci_bus 0000:00: root bus resource [bus 00-ff] <6>[ 0.826175] pci 0000:00:00.0: [8086:2e10] type 00 class 0x060000 conventional PCI endpoint <6>[ 0.826339] pci 0000:00:00.0: DMAR: Disabling IOMMU for graphics on this chipset <6>[ 0.826420] pci 0000:00:00.0: DMAR: Forcing write-buffer flush capability <6>[ 0.827232] pci 0000:00:02.0: [8086:2e12] type 00 class 0x030000 conventional PCI endpoint <6>[ 0.827340] pci 0000:00:02.0: BAR 0 [mem 0xf0000000-0xf03fffff 64bit] <6>[ 0.827404] pci 0000:00:02.0: BAR 2 [mem 0xe0000000-0xefffffff 64bit pref] <6>[ 0.827469] pci 0000:00:02.0: BAR 4 [io 0x1230-0x1237] <6>[ 0.827576] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 0.829542] pci 0000:00:02.1: [8086:2e13] type 00 class 0x038000 conventional PCI endpoint <6>[ 0.829649] pci 0000:00:02.1: BAR 0 [mem 0xf0400000-0xf04fffff 64bit] <6>[ 0.830378] pci 0000:00:03.0: [8086:2e14] type 00 class 0x078000 conventional PCI endpoint <6>[ 0.830518] pci 0000:00:03.0: BAR 0 [mem 0xf0527100-0xf052710f 64bit] <6>[ 0.830733] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold <6>[ 0.831568] pci 0000:00:03.2: [8086:2e16] type 00 class 0x010185 conventional PCI endpoint <6>[ 0.831711] pci 0000:00:03.2: BAR 0 [io 0x1238-0x123f] <6>[ 0.831771] pci 0000:00:03.2: BAR 1 [io 0x1260-0x1263] <6>[ 0.831830] pci 0000:00:03.2: BAR 2 [io 0x1240-0x1247] <6>[ 0.831888] pci 0000:00:03.2: BAR 3 [io 0x1264-0x1267] <6>[ 0.831946] pci 0000:00:03.2: BAR 4 [io 0x1220-0x122f] <6>[ 0.832729] pci 0000:00:03.3: [8086:2e17] type 00 class 0x070002 conventional PCI endpoint <6>[ 0.832867] pci 0000:00:03.3: BAR 0 [io 0x1248-0x124f] <6>[ 0.832926] pci 0000:00:03.3: BAR 1 [mem 0xf0524000-0xf0524fff] <6>[ 0.833867] pci 0000:00:19.0: [8086:10de] type 00 class 0x020000 conventional PCI endpoint <6>[ 0.833990] pci 0000:00:19.0: BAR 0 [mem 0xf0500000-0xf051ffff] <6>[ 0.834051] pci 0000:00:19.0: BAR 1 [mem 0xf0525000-0xf0525fff] <6>[ 0.834112] pci 0000:00:19.0: BAR 2 [io 0x1100-0x111f] <6>[ 0.834249] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold <6>[ 0.836372] pci 0000:00:1a.0: [8086:3a67] type 00 class 0x0c0300 conventional PCI endpoint <6>[ 0.836502] pci 0000:00:1a.0: BAR 4 [io 0x1120-0x113f] <6>[ 0.838331] pci 0000:00:1a.1: [8086:3a68] type 00 class 0x0c0300 conventional PCI endpoint <6>[ 0.838461] pci 0000:00:1a.1: BAR 4 [io 0x1140-0x115f] <6>[ 0.840305] pci 0000:00:1a.2: [8086:3a69] type 00 class 0x0c0300 conventional PCI endpoint <6>[ 0.840434] pci 0000:00:1a.2: BAR 4 [io 0x1160-0x117f] <6>[ 0.842324] pci 0000:00:1a.7: [8086:3a6c] type 00 class 0x0c0320 conventional PCI endpoint <6>[ 0.842453] pci 0000:00:1a.7: BAR 0 [mem 0xf0526800-0xf0526bff] <6>[ 0.842608] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold <6>[ 0.844565] pci 0000:00:1b.0: [8086:3a6e] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint <6>[ 0.844703] pci 0000:00:1b.0: BAR 0 [mem 0xf0520000-0xf0523fff 64bit] <6>[ 0.844883] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold <6>[ 0.845912] pci 0000:00:1c.0: [8086:3a70] type 01 class 0x060400 PCIe Root Port <6>[ 0.846017] pci 0000:00:1c.0: PCI bridge to [bus 20] <6>[ 0.846200] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold <6>[ 0.848220] pci 0000:00:1c.4: [8086:3a78] type 01 class 0x060400 PCIe Root Port <6>[ 0.848326] pci 0000:00:1c.4: PCI bridge to [bus 30] <6>[ 0.848507] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold <6>[ 0.850459] pci 0000:00:1d.0: [8086:3a64] type 00 class 0x0c0300 conventional PCI endpoint <6>[ 0.850589] pci 0000:00:1d.0: BAR 4 [io 0x1180-0x119f] <6>[ 0.852479] pci 0000:00:1d.1: [8086:3a65] type 00 class 0x0c0300 conventional PCI endpoint <6>[ 0.852609] pci 0000:00:1d.1: BAR 4 [io 0x11a0-0x11bf] <6>[ 0.854511] pci 0000:00:1d.2: [8086:3a66] type 00 class 0x0c0300 conventional PCI endpoint <6>[ 0.854641] pci 0000:00:1d.2: BAR 4 [io 0x11c0-0x11df] <6>[ 0.856525] pci 0000:00:1d.7: [8086:3a6a] type 00 class 0x0c0320 conventional PCI endpoint <6>[ 0.856655] pci 0000:00:1d.7: BAR 0 [mem 0xf0526c00-0xf0526fff] <6>[ 0.856813] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold <6>[ 0.858753] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 conventional PCI bridge <6>[ 0.858862] pci 0000:00:1e.0: PCI bridge to [bus 10] (subtractive decode) <6>[ 0.861156] pci 0000:00:1f.0: [8086:3a14] type 00 class 0x060100 conventional PCI endpoint <6>[ 0.863056] pci 0000:00:1f.2: [8086:3a02] type 00 class 0x010601 conventional PCI endpoint <6>[ 0.863177] pci 0000:00:1f.2: BAR 0 [io 0x1250-0x1257] <6>[ 0.863236] pci 0000:00:1f.2: BAR 1 [io 0x1268-0x126b] <6>[ 0.863295] pci 0000:00:1f.2: BAR 2 [io 0x1258-0x125f] <6>[ 0.863353] pci 0000:00:1f.2: BAR 3 [io 0x126c-0x126f] <6>[ 0.863411] pci 0000:00:1f.2: BAR 4 [io 0x11e0-0x11ff] <6>[ 0.863468] pci 0000:00:1f.2: BAR 5 [mem 0xf0526000-0xf05267ff] <6>[ 0.863607] pci 0000:00:1f.2: PME# supported from D3hot <6>[ 0.866386] pci 0000:00:1c.0: PCI bridge to [bus 20] <6>[ 0.867309] pci 0000:00:1c.4: PCI bridge to [bus 30] <6>[ 0.867407] pci_bus 0000:10: extended config space not accessible <6>[ 0.869205] pci 0000:00:1e.0: PCI bridge to [bus 10] (subtractive decode) <6>[ 0.869292] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfebfffff window] (subtractive decode) <6>[ 0.869387] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) <6>[ 0.869478] pci 0000:00:1e.0: bridge window [io 0x1000-0xffff window] (subtractive decode) <6>[ 0.869569] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) <6>[ 0.869673] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xf3ffffff window] (subtractive decode) <6>[ 0.869766] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) <6>[ 0.878553] ACPI: PCI: Interrupt link LNKA configured for IRQ 5 <6>[ 0.880120] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 <6>[ 0.881565] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 <6>[ 0.883551] ACPI: PCI: Interrupt link LNKD configured for IRQ 5 <6>[ 0.884961] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 <6>[ 0.886412] ACPI: PCI: Interrupt link LNKF configured for IRQ 11 <6>[ 0.887908] ACPI: PCI: Interrupt link LNKG configured for IRQ 5 <6>[ 0.889426] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 <6>[ 0.889488] ACPI: PCI: Interrupt link LNKH disabled <6>[ 0.895336] iommu: Default domain type: Translated <6>[ 0.895336] iommu: DMA domain TLB invalidation policy: lazy mode <5>[ 0.900037] SCSI subsystem initialized <7>[ 0.900858] libata version 3.00 loaded. <6>[ 0.901326] ACPI: bus type USB registered <6>[ 0.901992] usbcore: registered new interface driver usbfs <6>[ 0.902250] usbcore: registered new interface driver hub <6>[ 0.902438] usbcore: registered new device driver usb <6>[ 0.903018] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.903075] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.903226] PTP clock support registered <6>[ 0.903798] EDAC MC: Ver: 3.0.0 <6>[ 0.909487] NetLabel: Initializing <6>[ 0.909543] NetLabel: domain hash size = 128 <6>[ 0.909596] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO <6>[ 0.909883] NetLabel: unlabeled traffic allowed by default <6>[ 0.909982] mctp: management component transport protocol core <6>[ 0.910042] NET: Registered PF_MCTP protocol family <6>[ 0.910218] PCI: Using ACPI for IRQ routing <7>[ 0.911904] PCI: pci_cache_line_size set to 64 bytes <6>[ 0.911973] e820: register RAM buffer resource [mem 0x0009f800-0x0009ffff] <6>[ 0.912058] e820: register RAM buffer resource [mem 0xdd7a1640-0xdfffffff] <6>[ 0.912752] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 0.912826] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 0.912884] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 0.912984] vgaarb: loaded <7>[ 0.913855] Monitor-Mwait will be used to enter C-1 state <7>[ 0.913907] Monitor-Mwait will be used to enter C-2 state <7>[ 0.913927] Monitor-Mwait will be used to enter C-3 state <6>[ 0.913953] tsc: Marking TSC unstable due to TSC halts in idle <6>[ 0.917449] hpet: 8 channels of 2 reserved for per-cpu timers <6>[ 0.917717] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 24, 25, 0, 0, 0 <6>[ 0.917798] hpet0: 8 comparators, 64-bit 14.318180 MHz counter <6>[ 0.920023] clocksource: Switched to clocksource hpet <5>[ 0.923009] VFS: Disk quotas dquot_6.6.0 <6>[ 0.923161] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 0.929061] AppArmor: AppArmor Filesystem Enabled <6>[ 0.929426] acpi PNP0C02:00: Skipped [io 0x0010-0x001f] <6>[ 0.929489] acpi PNP0C02:00: Skipped [io 0x0050-0x0053] <6>[ 0.929547] acpi PNP0C02:00: Skipped [io 0x0072-0x0077] <6>[ 0.929605] acpi PNP0C02:00: Skipped [io 0x0090-0x009f] <6>[ 0.930029] acpi PNP0C02:01: Reserved [io 0x04d0-0x04d1] <6>[ 0.930264] acpi PNP0C02:02: Reserved [io 0x0400-0x041f] <6>[ 0.930342] acpi PNP0C02:02: Reserved [io 0x0420-0x043f] <6>[ 0.930407] acpi PNP0C02:02: Reserved [io 0x0440-0x045f] <6>[ 0.930471] acpi PNP0C02:02: Reserved [io 0x0460-0x047f] <6>[ 0.930536] acpi PNP0C02:02: Reserved [io 0x0800-0x087f] <6>[ 0.930600] acpi PNP0C02:02: Reserved [io 0x0880-0x08ff] <6>[ 0.930666] acpi PNP0C02:02: Reserved [io 0xf800-0xf81f] <6>[ 0.930730] acpi PNP0C02:02: Reserved [io 0xf820-0xf83f] <6>[ 0.930794] acpi PNP0C02:02: Reserved [io 0xf840-0xf85f] <6>[ 0.930859] acpi PNP0C02:02: Reserved [io 0xf860-0xf87f] <6>[ 0.930923] acpi PNP0C02:02: Reserved [io 0xfa00-0xfa3f] <6>[ 0.930988] acpi PNP0C02:02: Reserved [io 0xfc00-0xfc7f] <6>[ 0.931052] acpi PNP0C02:02: Reserved [io 0xfc80-0xfcff] <6>[ 0.931116] acpi PNP0C02:02: Reserved [io 0xfe00-0xfe7f] <6>[ 0.931197] acpi PNP0C02:02: Reserved [io 0xfe80-0xfeff] <6>[ 0.939028] acpi PNP0C01:00: Could not reserve [mem 0x00000000-0x0009ffff] <6>[ 0.939111] acpi PNP0C01:00: Could not reserve [mem 0x00100000-0xdfffffff] <6>[ 0.940493] acpi PNP0C01:00: Could not reserve [mem 0x000e4000-0x000fffff] <6>[ 0.940566] acpi PNP0C01:00: Reserved [mem 0xfec01000-0xfecfffff] <6>[ 0.940633] acpi PNP0C01:00: Reserved [mem 0xfed00400-0xfed3ffff] <6>[ 0.940700] acpi PNP0C01:00: Reserved [mem 0xfed45000-0xffffffff] <6>[ 0.940766] acpi PNP0C01:00: Reserved [mem 0xf4000000-0xf7ffffff] <6>[ 0.940832] acpi PNP0C01:00: Reserved [mem 0x000ce600-0x000e3fff] <6>[ 0.941130] pnp: PnP ACPI init <6>[ 0.952670] pnp: PnP ACPI: found 5 devices <6>[ 0.987498] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 0.988519] NET: Registered PF_INET protocol family <6>[ 0.988863] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.991760] tcp_listen_portaddr_hash hash table entries: 2048 (order: 6, 147456 bytes, linear) <6>[ 0.991971] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.992253] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) <6>[ 0.994416] TCP bind hash table entries: 32768 (order: 11, 4718592 bytes, vmalloc hugepage) <6>[ 0.996516] TCP: Hash tables configured (established 32768 bind 32768) <6>[ 0.997074] UDP hash table entries: 2048 (order: 7, 524288 bytes, linear) <6>[ 0.997513] UDP-Lite hash table entries: 2048 (order: 7, 524288 bytes, linear) <6>[ 0.998428] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 0.998656] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 20] add_size 1000 <6>[ 0.998757] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 20] add_size 200000 add_align 100000 <6>[ 0.998862] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 20] add_size 200000 add_align 100000 <6>[ 0.998961] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 30] add_size 1000 <6>[ 0.999049] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 30] add_size 200000 add_align 100000 <6>[ 0.999151] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 30] add_size 200000 add_align 100000 <6>[ 0.999348] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf81fffff]: assigned <6>[ 0.999432] pci 0000:00:1c.0: bridge window [mem 0xf8200000-0xf83fffff 64bit pref]: assigned <6>[ 0.999516] pci 0000:00:1c.4: bridge window [mem 0xf8400000-0xf85fffff]: assigned <6>[ 0.999596] pci 0000:00:1c.4: bridge window [mem 0xf8600000-0xf87fffff 64bit pref]: assigned <6>[ 0.999682] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]: assigned <6>[ 0.999746] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]: assigned <6>[ 0.999861] pci 0000:00:1c.0: PCI bridge to [bus 20] <6>[ 0.999920] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] <6>[ 0.999982] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf81fffff] <6>[ 1.000047] pci 0000:00:1c.0: bridge window [mem 0xf8200000-0xf83fffff 64bit pref] <6>[ 1.000131] pci 0000:00:1c.4: PCI bridge to [bus 30] <6>[ 1.000199] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] <6>[ 1.000263] pci 0000:00:1c.4: bridge window [mem 0xf8400000-0xf85fffff] <6>[ 1.000327] pci 0000:00:1c.4: bridge window [mem 0xf8600000-0xf87fffff 64bit pref] <6>[ 1.000411] pci 0000:00:1e.0: PCI bridge to [bus 10] <6>[ 1.000476] pci_bus 0000:00: resource 4 [mem 0xf8000000-0xfebfffff window] <6>[ 1.000539] pci_bus 0000:00: resource 5 [io 0x0000-0x0cf7 window] <6>[ 1.000599] pci_bus 0000:00: resource 6 [io 0x1000-0xffff window] <6>[ 1.000659] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff window] <6>[ 1.000721] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xf3ffffff window] <6>[ 1.000784] pci_bus 0000:00: resource 9 [mem 0xfed40000-0xfed44fff window] <6>[ 1.000847] pci_bus 0000:20: resource 0 [io 0x2000-0x2fff] <6>[ 1.000904] pci_bus 0000:20: resource 1 [mem 0xf8000000-0xf81fffff] <6>[ 1.000964] pci_bus 0000:20: resource 2 [mem 0xf8200000-0xf83fffff 64bit pref] <6>[ 1.001043] pci_bus 0000:30: resource 0 [io 0x3000-0x3fff] <6>[ 1.001100] pci_bus 0000:30: resource 1 [mem 0xf8400000-0xf85fffff] <6>[ 1.001160] pci_bus 0000:30: resource 2 [mem 0xf8600000-0xf87fffff 64bit pref] <6>[ 1.001322] pci_bus 0000:10: resource 4 [mem 0xf8000000-0xfebfffff window] <6>[ 1.001390] pci_bus 0000:10: resource 5 [io 0x0000-0x0cf7 window] <6>[ 1.001450] pci_bus 0000:10: resource 6 [io 0x1000-0xffff window] <6>[ 1.001509] pci_bus 0000:10: resource 7 [mem 0x000a0000-0x000bffff window] <6>[ 1.001572] pci_bus 0000:10: resource 8 [mem 0xe0000000-0xf3ffffff window] <6>[ 1.001635] pci_bus 0000:10: resource 9 [mem 0xfed40000-0xfed44fff window] <6>[ 1.075164] PCI: CLS 64 bytes, default 64 <6>[ 1.075340] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 1.075408] software IO TLB: mapped [mem 0x00000000d97a1000-0x00000000dd7a1000] (64MB) <5>[ 1.082985] Initialise system trusted keyrings <5>[ 1.083207] Key type blacklist registered <6>[ 1.083687] workingset: timestamp_bits=36 max_order=20 bucket_order=0 <6>[ 1.114370] squashfs: version 4.0 (2009/01/31) Phillip Lougher <6>[ 1.114880] ntfs3: Enabled Linux POSIX ACLs support <6>[ 1.114935] ntfs3: Read-only LZX/Xpress compression included <5>[ 1.115893] integrity: Platform Keyring initialized <5>[ 1.115983] integrity: Machine keyring initialized <6>[ 1.133638] xor: measuring software checksum speed <6>[ 1.133980] prefetch64-sse : 11562 MB/sec <6>[ 1.134368] generic_sse : 9856 MB/sec <6>[ 1.134421] xor: using function: prefetch64-sse (11562 MB/sec) <5>[ 1.134485] Key type asymmetric registered <5>[ 1.134549] Asymmetric key parser 'x509' registered <6>[ 1.134883] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) <6>[ 1.135587] io scheduler mq-deadline registered <6>[ 1.136943] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.145588] input: Power Button as /devices/platform/PNP0C0C:00/input/input0 <6>[ 1.146024] ACPI: button: Power Button [PBTN] <6>[ 1.146876] input: Power Button as /devices/platform/LNXPWRBN:00/input/input1 <6>[ 1.147897] ACPI: button: Power Button [PWRF] <6>[ 1.153406] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled <6>[ 1.175880] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 1.252540] 0000:00:03.3: ttyS4 at I/O 0x1248 (irq = 17, base_baud = 115200) is a 16550A <6>[ 1.257275] Linux agpgart interface v0.103 <6>[ 1.262024] tpm_tis 00:04: 1.2 TPM (device-id 0xB, rev-id 16) <6>[ 1.286278] tpm tpm0: TPM is disabled/deactivated (0x7) <6>[ 1.323335] ACPI: bus type drm_connector registered <7>[ 1.326401] initcall simpledrm_platform_driver_init blacklisted <6>[ 1.356975] loop: module loaded <5>[ 1.439662] Key type psk registered <6>[ 1.448703] ahci 0000:00:1f.2: AHCI vers 0001.0200, 32 command slots, 3 Gbps, SATA mode <6>[ 1.448796] ahci 0000:00:1f.2: 5/6 ports implemented (port mask 0x1f) <6>[ 1.448858] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part <6>[ 1.461047] scsi host0: ahci <6>[ 1.463395] scsi host1: ahci <6>[ 1.465503] scsi host2: ahci <6>[ 1.467564] scsi host3: ahci <6>[ 1.469670] scsi host4: ahci <6>[ 1.471776] scsi host5: ahci <6>[ 1.473017] ata1: SATA max UDMA/133 abar m2048@0xf0526000 port 0xf0526100 irq 26 lpm-pol 3 <6>[ 1.473103] ata2: SATA max UDMA/133 abar m2048@0xf0526000 port 0xf0526180 irq 26 lpm-pol 3 <6>[ 1.473203] ata3: SATA max UDMA/133 abar m2048@0xf0526000 port 0xf0526200 irq 26 lpm-pol 3 <6>[ 1.473286] ata4: SATA max UDMA/133 abar m2048@0xf0526000 port 0xf0526280 irq 26 lpm-pol 3 <6>[ 1.473369] ata5: SATA max UDMA/133 abar m2048@0xf0526000 port 0xf0526300 irq 26 lpm-pol 3 <6>[ 1.473452] ata6: DUMMY <6>[ 1.485398] scsi host6: ata_generic <6>[ 1.487305] scsi host7: ata_generic <6>[ 1.488207] ata7: PATA max UDMA/100 cmd 0x1238 ctl 0x1260 bmdma 0x1220 irq 18 lpm-pol 0 <6>[ 1.488291] ata8: PATA max UDMA/100 cmd 0x1240 ctl 0x1264 bmdma 0x1228 irq 18 lpm-pol 0 <6>[ 1.490833] tun: Universal TUN/TAP device driver, 1.6 <6>[ 1.500980] ehci-pci 0000:00:1d.7: EHCI Host Controller <6>[ 1.501276] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 <6>[ 1.501415] ehci-pci 0000:00:1d.7: debug port 1 <6>[ 1.505679] ehci-pci 0000:00:1d.7: irq 20, io mem 0xf0526c00 <6>[ 1.511291] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 <6>[ 1.512457] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.19 <6>[ 1.512563] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 1.512646] usb usb1: Product: EHCI Host Controller <6>[ 1.512704] usb usb1: Manufacturer: Linux 6.19.0-next-20260216-next-20260216-g350adaf7fde9+ ehci_hcd <6>[ 1.512794] usb usb1: SerialNumber: 0000:00:1d.7 <6>[ 1.515783] hub 1-0:1.0: USB hub found <6>[ 1.516023] hub 1-0:1.0: 6 ports detected <6>[ 1.532513] ehci-pci 0000:00:1a.7: EHCI Host Controller <6>[ 1.532666] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 2 <6>[ 1.532778] ehci-pci 0000:00:1a.7: debug port 1 <6>[ 1.536911] ehci-pci 0000:00:1a.7: irq 22, io mem 0xf0526800 <6>[ 1.543258] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 <6>[ 1.544068] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.19 <6>[ 1.544157] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 1.544252] usb usb2: Product: EHCI Host Controller <6>[ 1.544310] usb usb2: Manufacturer: Linux 6.19.0-next-20260216-next-20260216-g350adaf7fde9+ ehci_hcd <6>[ 1.544399] usb usb2: SerialNumber: 0000:00:1a.7 <6>[ 1.546494] hub 2-0:1.0: USB hub found <6>[ 1.546679] hub 2-0:1.0: 6 ports detected <6>[ 1.566203] uhci_hcd 0000:00:1a.0: UHCI Host Controller <6>[ 1.566436] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 <6>[ 1.567065] uhci_hcd 0000:00:1a.0: detected 2 ports <6>[ 1.567189] uhci_hcd 0000:00:1a.0: irq 20, io port 0x00001120 <6>[ 1.568127] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.19 <6>[ 1.568254] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 1.568335] usb usb3: Product: UHCI Host Controller <6>[ 1.568392] usb usb3: Manufacturer: Linux 6.19.0-next-20260216-next-20260216-g350adaf7fde9+ uhci_hcd <6>[ 1.568479] usb usb3: SerialNumber: 0000:00:1a.0 <6>[ 1.570568] hub 3-0:1.0: USB hub found <6>[ 1.570805] hub 3-0:1.0: 2 ports detected <6>[ 1.578160] uhci_hcd 0000:00:1a.1: UHCI Host Controller <6>[ 1.578282] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 <6>[ 1.578383] uhci_hcd 0000:00:1a.1: detected 2 ports <6>[ 1.578615] uhci_hcd 0000:00:1a.1: irq 21, io port 0x00001140 <6>[ 1.579295] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.19 <6>[ 1.579383] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 1.579463] usb usb4: Product: UHCI Host Controller <6>[ 1.579520] usb usb4: Manufacturer: Linux 6.19.0-next-20260216-next-20260216-g350adaf7fde9+ uhci_hcd <6>[ 1.579607] usb usb4: SerialNumber: 0000:00:1a.1 <6>[ 1.581491] hub 4-0:1.0: USB hub found <6>[ 1.581628] hub 4-0:1.0: 2 ports detected <6>[ 1.588386] uhci_hcd 0000:00:1a.2: UHCI Host Controller <6>[ 1.588496] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 <6>[ 1.588603] uhci_hcd 0000:00:1a.2: detected 2 ports <6>[ 1.588702] uhci_hcd 0000:00:1a.2: irq 22, io port 0x00001160 <6>[ 1.589446] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.19 <6>[ 1.589534] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 1.589614] usb usb5: Product: UHCI Host Controller <6>[ 1.589670] usb usb5: Manufacturer: Linux 6.19.0-next-20260216-next-20260216-g350adaf7fde9+ uhci_hcd <6>[ 1.589758] usb usb5: SerialNumber: 0000:00:1a.2 <6>[ 1.591602] hub 5-0:1.0: USB hub found <6>[ 1.591743] hub 5-0:1.0: 2 ports detected <6>[ 1.598544] uhci_hcd 0000:00:1d.0: UHCI Host Controller <6>[ 1.598653] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 <6>[ 1.598755] uhci_hcd 0000:00:1d.0: detected 2 ports <6>[ 1.598845] uhci_hcd 0000:00:1d.0: irq 20, io port 0x00001180 <6>[ 1.599517] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.19 <6>[ 1.599605] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 1.599685] usb usb6: Product: UHCI Host Controller <6>[ 1.599741] usb usb6: Manufacturer: Linux 6.19.0-next-20260216-next-20260216-g350adaf7fde9+ uhci_hcd <6>[ 1.599828] usb usb6: SerialNumber: 0000:00:1d.0 <6>[ 1.602092] hub 6-0:1.0: USB hub found <6>[ 1.602240] hub 6-0:1.0: 2 ports detected <6>[ 1.608552] uhci_hcd 0000:00:1d.1: UHCI Host Controller <6>[ 1.608668] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 <6>[ 1.608768] uhci_hcd 0000:00:1d.1: detected 2 ports <6>[ 1.608858] uhci_hcd 0000:00:1d.1: irq 21, io port 0x000011a0 <6>[ 1.609615] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.19 <6>[ 1.609702] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 1.609782] usb usb7: Product: UHCI Host Controller <6>[ 1.609838] usb usb7: Manufacturer: Linux 6.19.0-next-20260216-next-20260216-g350adaf7fde9+ uhci_hcd <6>[ 1.609926] usb usb7: SerialNumber: 0000:00:1d.1 <6>[ 1.612146] hub 7-0:1.0: USB hub found <6>[ 1.612326] hub 7-0:1.0: 2 ports detected <6>[ 1.618604] uhci_hcd 0000:00:1d.2: UHCI Host Controller <6>[ 1.618711] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 <6>[ 1.618818] uhci_hcd 0000:00:1d.2: detected 2 ports <6>[ 1.618908] uhci_hcd 0000:00:1d.2: irq 22, io port 0x000011c0 <6>[ 1.619708] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.19 <6>[ 1.619796] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 1.619876] usb usb8: Product: UHCI Host Controller <6>[ 1.619932] usb usb8: Manufacturer: Linux 6.19.0-next-20260216-next-20260216-g350adaf7fde9+ uhci_hcd <6>[ 1.620019] usb usb8: SerialNumber: 0000:00:1d.2 <6>[ 1.621951] hub 8-0:1.0: USB hub found <6>[ 1.622086] hub 8-0:1.0: 2 ports detected <6>[ 1.624983] usbcore: registered new interface driver usb-storage <6>[ 1.625520] usbcore: registered new interface driver usbserial_generic <6>[ 1.625766] usbserial: USB Serial support registered for generic <6>[ 1.626008] usbcore: registered new interface driver ftdi_sio <6>[ 1.626197] usbserial: USB Serial support registered for FTDI USB Serial Device <6>[ 1.626495] usbcore: registered new interface driver pl2303 <6>[ 1.626629] usbserial: USB Serial support registered for pl2303 <6>[ 1.627103] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 <6>[ 1.630576] serio: i8042 KBD port at 0x60,0x64 irq 1 <6>[ 1.630730] serio: i8042 AUX port at 0x60,0x64 irq 12 <6>[ 1.633152] mousedev: PS/2 mouse device common for all mice <6>[ 1.635321] rtc_cmos 00:00: RTC can wake from S4 <6>[ 1.637798] rtc_cmos 00:00: registered as rtc0 <6>[ 1.637923] rtc_cmos 00:00: setting system clock to 2026-02-16T15:58:13 UTC (1771257493) <6>[ 1.638418] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs <6>[ 1.638615] i2c_dev: i2c /dev entries driver <6>[ 1.640574] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 1.640668] softdog: soft_reboot_cmd= soft_active_on_boot=0 <6>[ 1.640755] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. <6>[ 1.640918] device-mapper: uevent: version 1.0.3 <6>[ 1.641810] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev <6>[ 1.641910] intel_pstate: CPU model not supported <6>[ 1.642372] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 1.653071] drop_monitor: Initializing network drop monitor service <6>[ 1.653859] NET: Registered PF_INET6 protocol family <6>[ 1.656620] Segment Routing with IPv6 <6>[ 1.656783] In-situ OAM (IOAM) with IPv6 <6>[ 1.656989] NET: Registered PF_PACKET protocol family <5>[ 1.657484] Key type dns_resolver registered <6>[ 1.659830] microcode: Current revision: 0x00000a07 <6>[ 1.660423] IPI shorthand broadcast: enabled <6>[ 1.727262] registered taskstats version 1 <5>[ 1.728702] Loading compiled-in X.509 certificates <6>[ 1.781629] ata4: SATA link down (SStatus 4 SControl 300) <6>[ 1.781754] ata5: SATA link down (SStatus 4 SControl 300) <6>[ 1.782155] ata3: SATA link down (SStatus 4 SControl 300) <6>[ 1.782263] ata2: SATA link down (SStatus 4 SControl 300) <6>[ 1.783392] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) <4>[ 1.784215] ata1.00: Model 'INTEL SSDSC2KW240H6', rev ' LSF036C', applying quirks: zeroaftertrim <6>[ 1.785311] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0(SET FEATURES) filtered out <6>[ 1.785380] ata1.00: ACPI cmd ef/03:45:00:00:00:a0(SET FEATURES) filtered out <6>[ 1.785503] ata1.00: ACPI cmd f5/00:00:00:00:00:a0(SECURITY FREEZE LOCK) filtered out <6>[ 1.785587] ata1.00: ACPI cmd ef/10:03:00:00:00:a0(SET FEATURES) filtered out <6>[ 1.785771] ata1.00: ATA-10: INTEL SSDSC2KW240H6, LSF036C, max UDMA/133 <6>[ 1.785867] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 32), AA <6>[ 1.786313] ata1.00: Features: Dev-Sleep HIPM DIPM <6>[ 1.787317] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0(SET FEATURES) filtered out <6>[ 1.787385] ata1.00: ACPI cmd ef/03:45:00:00:00:a0(SET FEATURES) filtered out <6>[ 1.787507] ata1.00: ACPI cmd f5/00:00:00:00:00:a0(SECURITY FREEZE LOCK) filtered out <6>[ 1.787590] ata1.00: ACPI cmd ef/10:03:00:00:00:a0(SET FEATURES) filtered out <6>[ 1.788145] ata1.00: configured for UDMA/133 <5>[ 1.789771] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2KW24 036C PQ: 0 ANSI: 5 <5>[ 1.795122] sd 0:0:0:0: Attached scsi generic sg0 type 0 <5>[ 1.795689] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB) <5>[ 1.795869] sd 0:0:0:0: [sda] Write Protect is off <7>[ 1.795949] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 <5>[ 1.796487] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <6>[ 1.796887] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes <6>[ 1.815836] sda: sda1 sda2 <5>[ 1.817659] sd 0:0:0:0: [sda] Attached SCSI disk <6>[ 1.926572] Demotion targets for Node 0: null <6>[ 1.927049] kmemleak: Kernel memory leak detector initialized (mem pool available: 14959) <6>[ 1.927071] kmemleak: Automatic memory scanning thread started <5>[ 1.927995] Key type .fscrypt registered <5>[ 1.928050] Key type fscrypt-provisioning registered <6>[ 1.941009] Btrfs loaded, zoned=yes, fsverity=yes <5>[ 1.941454] Key type trusted registered <5>[ 1.945382] Key type encrypted registered <6>[ 1.945447] AppArmor: AppArmor sha256 policy hashing enabled <5>[ 1.945569] Loading compiled-in module X.509 certificates <5>[ 1.947530] Loaded X.509 cert 'Build time autogenerated kernel key: 0dd733f6c9626c20202049a3a744a4716c55d52c' <6>[ 1.947632] ima: Allocated hash algorithm: sha256 <3>[ 1.962375] ima: Error Communicating to TPM chip <3>[ 1.965969] ima: Error Communicating to TPM chip <3>[ 1.969284] ima: Error Communicating to TPM chip <3>[ 1.972988] ima: Error Communicating to TPM chip <3>[ 1.977029] ima: Error Communicating to TPM chip <3>[ 1.981028] ima: Error Communicating to TPM chip <3>[ 1.985278] ima: Error Communicating to TPM chip <3>[ 1.988977] ima: Error Communicating to TPM chip <6>[ 1.995325] ima: No architecture policies found <6>[ 1.995706] evm: Initialising EVM extended attributes: <6>[ 1.995763] evm: security.selinux <6>[ 1.995811] evm: security.SMACK64 <6>[ 1.995859] evm: security.SMACK64EXEC <6>[ 1.995909] evm: security.SMACK64TRANSMUTE <6>[ 1.995960] evm: security.SMACK64MMAP <6>[ 1.996009] evm: security.apparmor <6>[ 1.996057] evm: security.ima <6>[ 1.996103] evm: security.capability <6>[ 1.996152] evm: HMAC attrs: 0x1 <6>[ 2.003049] PM: Magic number: 14:211:993 <6>[ 2.003590] netconsole: network logging started <6>[ 2.044562] RAS: Correctable Errors collector initialized. <6>[ 2.045873] clk: Disabling unused clocks <6>[ 2.045956] PM: genpd: Disabling unused power domains <6>[ 2.047285] md: Waiting for all devices to be available before autodetect <6>[ 2.047356] md: If you don't use raid, use raid=noautodetect <6>[ 2.047415] md: Autodetecting RAID arrays. <6>[ 2.047477] md: autorun ... <6>[ 2.047524] md: ... autorun DONE. <6>[ 2.123837] EXT4-fs (sda2): mounted filesystem 9d6a1453-d5b3-4bc6-b2df-f12ec2a4e9dc ro with ordered data mode. Quota mode: none. <6>[ 2.124096] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. <6>[ 2.126515] devtmpfs: mounted <6>[ 2.126810] VFS: Pivoted into new rootfs <6>[ 2.159757] Freeing unused decrypted memory: 2036K <6>[ 2.164007] Freeing unused kernel image (initmem) memory: 5764K <6>[ 2.164372] Write protecting the kernel read-only data: 36864k <6>[ 2.165476] Freeing unused kernel image (text/rodata gap) memory: 748K <6>[ 2.165944] Freeing unused kernel image (rodata/data gap) memory: 552K <6>[ 2.215591] x86/mm: Checked W+X mappings: passed, no W+X pages found. <6>[ 2.215842] x86/mm: Checking user space page tables <6>[ 2.265865] x86/mm: Checked W+X mappings: passed, no W+X pages found. <6>[ 2.275303] Run /sbin/init as init process <7>[ 2.275374] with arguments: <7>[ 2.275379] /sbin/init <7>[ 2.275384] with environment: <7>[ 2.275388] HOME=/ <7>[ 2.275392] TERM=linux <7>[ 2.475995] systemd[1]: Inserted module 'autofs4' <7>[ 2.522551] systemd[1]: systemd 255.4-1ubuntu8.12 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) <7>[ 2.522804] systemd[1]: Detected architecture x86-64. <7>[ 2.528112] systemd[1]: Hostname set to . <7>[ 3.378332] systemd[1]: Queued start job for default target graphical.target. <7>[ 3.422162] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. <7>[ 3.429255] systemd[1]: Created slice user.slice - User and Session Slice. <7>[ 3.430354] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. <7>[ 3.433707] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. <7>[ 3.434272] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. <7>[ 3.434748] systemd[1]: Reached target slices.target - Slice Units. <7>[ 3.435146] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps. <7>[ 3.435656] systemd[1]: Reached target snapd.mounts.target - Mounted snaps. <7>[ 3.436079] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. <7>[ 3.437208] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. <7>[ 3.438846] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. <7>[ 3.440228] systemd[1]: Listening on multipathd.socket - multipathd control socket. <7>[ 3.441847] systemd[1]: Listening on syslog.socket - Syslog Socket. <7>[ 3.443104] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. <7>[ 3.444335] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. <7>[ 3.445773] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). <7>[ 3.447401] systemd[1]: Listening on systemd-journald.socket - Journal Socket. <7>[ 3.448731] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. <7>[ 3.449251] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 3.450550] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. <7>[ 3.451832] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. <7>[ 3.467804] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... <7>[ 3.485789] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... <7>[ 3.504394] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... <7>[ 3.531423] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... <7>[ 3.561809] systemd[1]: Starting systemd-journald.service - Journal Service... <7>[ 3.576807] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... <7>[ 3.597902] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... <7>[ 3.615880] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... <7>[ 3.632088] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... <7>[ 3.646968] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... <7>[ 3.665018] systemd-journald[163]: Collecting audit messages is disabled. <7>[ 3.688102] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... <7>[ 3.705426] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... <7>[ 3.718064] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... <7>[ 3.731493] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... <7>[ 3.749137] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics... <7>[ 3.755326] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). <7>[ 3.775957] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device... <7>[ 3.796367] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... <7>[ 3.797215] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 3.797532] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 3.816977] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... <7>[ 3.836554] systemd[1]: Started systemd-journald.service - Journal Service. <5>[ 4.132432] random: crng init done <6>[ 4.427879] fuse: init (API version 7.45) <6>[ 4.627209] EXT4-fs (sda2): re-mounted 9d6a1453-d5b3-4bc6-b2df-f12ec2a4e9dc r/w. <6>[ 4.781023] Adding 3902460k swap on /swap.img. Priority:-1 extents:31 across:193724416k SS <7>[ 4.861638] systemd-journald[163]: Received client request to flush runtime journal. <7>[ 4.925626] systemd-journald[163]: /var/log/journal/69a36851d52642a1810827bec9288eba/system.journal: Journal file uses a different sequence number ID, rotating. <7>[ 4.925658] systemd-journald[163]: Rotating system journal. <5>[ 5.871047] audit: type=1400 audit(1771257497.731:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=283 comm="apparmor_parser" <5>[ 5.873751] audit: type=1400 audit(1771257497.734:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=284 comm="apparmor_parser" <5>[ 5.903993] audit: type=1400 audit(1771257497.764:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=285 comm="apparmor_parser" <5>[ 5.915672] audit: type=1400 audit(1771257497.776:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=286 comm="apparmor_parser" <5>[ 5.935764] audit: type=1400 audit(1771257497.796:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=288 comm="apparmor_parser" <5>[ 5.939730] audit: type=1400 audit(1771257497.800:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=289 comm="apparmor_parser" <5>[ 5.969415] audit: type=1400 audit(1771257497.830:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=290 comm="apparmor_parser" <5>[ 5.971145] audit: type=1400 audit(1771257497.831:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=291 comm="apparmor_parser" <5>[ 5.999473] audit: type=1400 audit(1771257497.860:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=292 comm="apparmor_parser" <5>[ 6.006356] audit: type=1400 audit(1771257497.867:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=293 comm="apparmor_parser" <6>[ 9.988969] evm: overlay not supported <6>[ 11.672480] loop0: detected capacity change from 0 to 8 <4>[ 12.193634] kauditd_printk_skb: 111 callbacks suppressed <5>[ 12.193641] audit: type=1400 audit(1771257504.054:123): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=818 comm="apparmor_parser" <5>[ 12.205565] audit: type=1400 audit(1771257504.066:124): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=818 comm="apparmor_parser" <6>[ 14.919814] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 14.919823] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 14.987668] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode <6>[ 15.263635] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 64:31:50:2c:d0:42 <6>[ 15.263646] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection <6>[ 15.263680] e1000e 0000:00:19.0 eth0: MAC: 8, PHY: 8, PBA No: FFFFFF-0FF <6>[ 15.281798] snd_hda_intel 0000:00:1b.0: codec_mask forced to 0x4 <6>[ 15.994355] intel_powerclamp: No package C-state available <4>[ 16.289234] snd_hda_intel 0000:00:1b.0: azx_get_response timeout, switching to polling mode: last cmd=0x200f0000 <6>[ 16.571366] gpio_ich gpio_ich.2.auto: GPIO from 512 to 583 <6>[ 16.571372] e1000e 0000:00:19.0 enp0s25: renamed from eth0 <6>[ 16.712958] input: HP WMI hotkeys as /devices/virtual/input/input5 <3>[ 16.819606] hp_bioscfg: Unable to set BIOS settings on HP systems <4>[ 17.290299] snd_hda_intel 0000:00:1b.0: No response from codec, disabling MSI: last cmd=0x200f0000 <4>[ 18.292277] snd_hda_intel 0000:00:1b.0: Codec #2 probe error; disabling it... <3>[ 18.292303] snd_hda_intel 0000:00:1b.0: no codecs initialized <6>[ 19.281152] e1000e 0000:00:19.0 enp0s25: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None <7>[ 32.234485] systemd-journald[163]: /var/log/journal/69a36851d52642a1810827bec9288eba/user-1000.journal: Journal file uses a different sequence number ID, rotating.