Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.35 seconds
Igt-Version 
IGT-Version: 2.3-ga4e057edb (x86_64) (Linux: 6.19.0-next-20260216-next-20260216-g350adaf7fde9+ x86_64)
Out 
Using IGT_SRANDOM=1771257807 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.354s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.354s)
Dmesg
<7> [250.929277] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_TC1
<6> [250.947699] Console: switching to colour dummy device 80x25
<6> [250.948039] [IGT] kms_force_connector_basic: executing
<7> [250.960400] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [250.962175] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [250.977562] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [250.979532] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:527:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [250.979547] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [250.979558] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [250.983912] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] disconnected
<7> [250.983973] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [250.983978] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [250.988201] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] disconnected
<7> [250.988256] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [250.988259] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [250.992475] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] disconnected
<6> [250.992763] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [250.993163] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:527:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [250.993169] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [250.993172] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [251.054257] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [251.060021] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [251.060040] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [251.060168] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [251.065646] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [251.065650] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [251.065775] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] status updated from disconnected to connected
<7> [251.065824] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] probed modes:
<7> [251.065827] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [251.065830] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [251.065832] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [251.065835] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [251.065837] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [251.065854] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [251.065898] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [251.065936] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [251.065939] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [251.124246] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [251.129935] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [251.129946] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [251.130183] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [251.135661] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [251.135666] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [251.135832] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] probed modes:
<7> [251.135835] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [251.135838] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [251.135841] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [251.135843] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [251.135845] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [251.136011] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:527:HDMI-A-1] EDID override set
<7> [251.136030] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [251.136033] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [251.136193] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:527:HDMI-A-1] ELD monitor IGT
<7> [251.136195] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:527:HDMI-A-1] ELD size 24, SAD count 0
<7> [251.197242] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [251.202878] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [251.203000] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [251.203009] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [251.203015] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] probed modes:
<7> [251.203018] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [251.203022] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [251.203026] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [251.203029] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [251.203032] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [251.203036] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [251.203151] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:527:HDMI-A-1] EDID override set
<7> [251.203175] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [251.203177] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [251.203365] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:527:HDMI-A-1] ELD monitor IGT
<7> [251.203368] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:527:HDMI-A-1] ELD size 24, SAD count 0
<7> [251.203369] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:527:HDMI-A-1] EDID changed, epoch counter 4
<7> [251.261767] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [251.267440] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [251.267525] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [251.267531] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] probed modes:
<7> [251.267533] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [251.267536] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [251.267539] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [251.267543] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [251.267546] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [251.267631] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:527:HDMI-A-1] EDID override reset
<7> [251.267648] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [251.267651] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [251.326230] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [251.331910] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [251.331919] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [251.332148] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [251.337625] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [251.337629] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [251.337749] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:527:HDMI-A-1] EDID changed, epoch counter 5
<7> [251.337790] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [251.337798] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [251.337802] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] probed modes:
<7> [251.337804] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [251.337807] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [251.337809] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [251.337811] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [251.337813] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [251.337927] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:527:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [251.337931] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [251.337934] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [251.342161] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] status updated from connected to disconnected
<7> [251.342168] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] disconnected
<7> [251.342276] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [251.342319] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [251.342354] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [251.342357] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [251.346588] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] disconnected
<6> [251.346802] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [251.347148] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [251.348145] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:506:eDP-1] force updated from 0 to 0 or reprobing
<7> [251.348150] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1]
<7> [251.348153] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:506:eDP-1]
<7> [251.348791] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [251.349309] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [251.349445] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [251.349575] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [251.349714] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [251.349717] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD monitor
<7> [251.349719] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD size 20, SAD count 0
<7> [251.349730] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] VRR capable: no
<7> [251.349859] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [251.349987] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [251.350765] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] probed modes:
<7> [251.350769] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [251.350790] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1]
<7> [251.350792] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:506:eDP-1]
<7> [251.351352] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [251.351750] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [251.351872] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [251.351992] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [251.352122] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [251.352125] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD monitor
<7> [251.352127] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD size 20, SAD count 0
<7> [251.352135] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] VRR capable: no
<7> [251.352269] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [251.352392] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [251.353104] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] probed modes:
<7> [251.353107] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [251.353177] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:506:eDP-1] EDID override reset
<7> [251.353197] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1]
<7> [251.353199] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:506:eDP-1]
<7> [251.353755] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [251.354152] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [251.354302] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [251.354427] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [251.354561] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [251.354564] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD monitor
<7> [251.354566] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD size 20, SAD count 0
<7> [251.354574] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] VRR capable: no
<7> [251.354700] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [251.354820] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [251.355584] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] probed modes:
<7> [251.355587] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [251.355659] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:515:DP-1] EDID override reset
<7> [251.355669] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:DP-1]
<7> [251.355672] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:515:DP-1]
<7> [251.359865] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:DP-1] disconnected
<7> [251.359963] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:527:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [251.359966] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [251.359969] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [251.364192] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] disconnected
<7> [251.364210] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [251.364213] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [251.368417] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] disconnected
<7> [251.368480] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:527:HDMI-A-1] EDID override reset
<7> [251.368492] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [251.368494] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [251.372714] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] disconnected
<7> [251.372779] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:533:DP-2] EDID override reset
<7> [251.372789] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2]
<7> [251.372791] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:533:DP-2]
<7> [251.373216] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_TC1
<7> [251.395615] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [251.417357] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [251.439075] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [251.460825] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [251.482545] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [251.504294] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [251.526043] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [251.547762] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [251.569512] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [251.591230] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [251.612948] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [251.634698] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [251.656416] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [251.678134] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [251.699927] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [251.721669] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [251.743385] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [251.765103] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [251.786857] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [251.808604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [251.830321] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [251.834190] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [251.834183] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [251.834186] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [251.852038] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [251.873790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [251.895508] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [251.917225] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [251.938943] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [251.960694] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [251.982384] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [252.004204] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [252.026126] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [252.048026] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [252.069882] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [252.070138] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -110
<7> [252.070164] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] disconnected
<7> [252.070453] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:542:DP-3] EDID override reset
<7> [252.070475] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3]
<7> [252.070481] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:542:DP-3]
<7> [252.070725] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_TC1
<7> [252.070994] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [252.071220] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3] disconnected
<7> [252.071296] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:551:DP-4] EDID override reset
<7> [252.071307] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:DP-4]
<7> [252.071310] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:551:DP-4]
<7> [252.071655] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [252.071892] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:DP-4] disconnected
<7> [252.071972] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:560:DP-5] EDID override reset
<7> [252.071985] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:560:DP-5]
<7> [252.071988] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:560:DP-5]
<7> [252.072236] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [252.072442] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:560:DP-5] disconnected
<6> [252.072986] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [252.073471] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [252.085615] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [252.085620] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [252.085670] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1]
<7> [252.085674] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:506:eDP-1]
<7> [252.086335] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [252.086901] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [252.087060] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [252.087299] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [252.087442] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [252.087445] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD monitor
<7> [252.087448] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD size 20, SAD count 0
<7> [252.087459] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] VRR capable: no
<7> [252.087593] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [252.087723] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [252.088769] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] probed modes:
<7> [252.088773] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [252.088777] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:DP-1]
<7> [252.088781] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:515:DP-1]
<7> [252.093025] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:DP-1] disconnected
<7> [252.093029] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [252.093032] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [252.097285] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] disconnected
<7> [252.097290] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2]
<7> [252.097294] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:533:DP-2]
<7> [252.097710] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_TC1
<7> [252.120472] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [252.142223] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [252.163973] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [252.185756] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [252.207508] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [252.229258] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [252.251009] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [252.272857] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [252.294640] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [252.316395] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [252.338142] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [252.359893] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [252.381676] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [252.403427] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [252.425177] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [252.446928] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [252.468711] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [252.490468] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [252.512212] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [252.533963] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [252.555778] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [252.577562] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [252.599347] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [252.621102] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [252.642847] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [252.664636] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [252.686383] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [252.708132] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [252.729914] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [252.751680] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [252.773417] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [252.795167] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [252.795361] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -110
<7> [252.795379] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] disconnected
<7> [252.795384] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3]
<7> [252.795388] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:542:DP-3]
<7> [252.795665] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3] disconnected
<7> [252.795669] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:DP-4]
<7> [252.795672] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:551:DP-4]
<7> [252.796019] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:DP-4] disconnected
<7> [252.796022] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:560:DP-5]
<7> [252.796024] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:560:DP-5]
<7> [252.796314] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:560:DP-5] disconnected
<7> [252.796320] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:eDP-1] enabled? yes
<7> [252.796327] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:515:DP-1] enabled? no
<7> [252.796331] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:527:HDMI-A-1] enabled? no
<7> [252.796336] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:DP-2] enabled? no
<7> [252.796342] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:DP-3] enabled? no
<7> [252.796347] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:551:DP-4] enabled? no
<7> [252.796353] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:560:DP-5] enabled? no
<7> [252.796391] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [252.796405] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:eDP-1] found preferred mode: 2880x1800
<7> [252.796409] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7> [252.796430] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0)
<7> [252.808588] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [252.819684] Console: switching to colour frame buffer device 180x56
Created at 2026-02-16 18:59:13