Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 2.3-ga26a2808e (x86_64) (Linux: 6.19.0-next-20260211-next-20260211-g9152bc8cebcb+ x86_64)
Out 
Using IGT_SRANDOM=1770820943 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.027s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.027s)
Dmesg
<6> [255.706656] Console: switching to colour dummy device 80x25
<6> [255.707785] [IGT] kms_force_connector_basic: executing
<7> [255.903752] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [255.905676] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [255.906354] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [255.907355] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:75:VGA-1] force updated from 0 to 0 or reprobing
<7> [255.907370] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [255.907381] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [255.907715] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [255.908020] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [255.908508] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [255.908750] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [255.909147] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [255.909406] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [255.909413] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [255.909655] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [255.910956] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [255.910964] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [255.911325] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [255.911574] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<7> [255.911662] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [255.911670] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [255.911920] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [255.912189] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [255.912661] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [255.912898] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [255.913355] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [255.913595] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [255.913601] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [255.913843] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [255.915149] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [255.915160] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [255.915402] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [255.915644] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<7> [255.915745] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [255.915752] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [255.915999] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [255.916274] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [255.916744] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [255.916981] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [255.917410] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [255.917653] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [255.917660] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [255.917900] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [255.919192] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [255.919199] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [255.919440] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [255.919682] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<6> [255.920634] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [255.921194] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:75:VGA-1] force updated from 0 to 2 or reprobing
<7> [255.921211] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [255.921225] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] status updated from disconnected to connected
<7> [255.921408] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [255.921507] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [255.921443] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [255.921857] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [255.922445] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [255.922832] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [255.922857] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [255.923269] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [255.925049] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [255.925072] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [255.925643] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] probed modes:
<7> [255.925656] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [255.925668] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [255.925679] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [255.925690] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [255.925701] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [255.925831] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [255.926034] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [255.926454] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [255.927001] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [255.927409] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [255.927432] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [255.927818] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [255.929543] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [255.929565] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [255.930073] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] probed modes:
<7> [255.930085] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [255.930104] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [255.930135] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [255.930145] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [255.930155] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [255.930633] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:75:VGA-1] EDID override set
<7> [255.930686] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [255.930773] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:75:VGA-1] ELD monitor IGT
<7> [255.930781] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:75:VGA-1] ELD size 24, SAD count 0
<7> [255.931070] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [255.931098] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [255.931147] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] probed modes:
<7> [255.931157] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [255.931168] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [255.931179] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [255.931189] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [255.931200] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [255.931210] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [255.931555] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:75:VGA-1] EDID override set
<7> [255.931615] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [255.931689] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:75:VGA-1] ELD monitor IGT
<7> [255.931697] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:75:VGA-1] ELD size 24, SAD count 0
<7> [255.931705] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:75:VGA-1] EDID changed, epoch counter 58
<7> [255.931977] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [255.931997] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] probed modes:
<7> [255.932005] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [255.932015] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [255.932025] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [255.932035] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [255.932045] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [255.932363] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:75:VGA-1] EDID override reset
<7> [255.932425] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [255.932624] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [255.933001] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [255.933577] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [255.933940] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [255.933961] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [255.934368] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [255.936027] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [255.936046] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [255.936586] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [255.936610] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [255.936637] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] probed modes:
<7> [255.936646] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [255.936657] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [255.936666] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [255.936676] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [255.936686] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [255.937181] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:75:VGA-1] force updated from 2 to 0 or reprobing
<7> [255.937194] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [255.937205] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [255.937602] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [255.937958] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [255.938717] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [255.938977] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [255.939406] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [255.939649] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [255.939656] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [255.939898] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [255.941219] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [255.941227] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [255.941468] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [255.941710] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] status updated from connected to disconnected
<7> [255.941721] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<7> [255.941728] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:75:VGA-1] EDID changed, epoch counter 60
<7> [255.941799] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [255.941899] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [255.941986] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [255.941998] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [255.942400] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [255.942766] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [255.943344] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [255.943732] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [255.944280] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [255.944662] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [255.944673] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [255.945051] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [255.946750] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [255.946762] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [255.947197] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [255.947584] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<6> [255.949101] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [255.950060] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [255.951228] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:71:LVDS-1] force updated from 0 to 0 or reprobing
<7> [255.951243] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:LVDS-1]
<7> [255.951264] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:LVDS-1] ELD monitor
<7> [255.951274] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:LVDS-1] ELD size 20, SAD count 0
<7> [255.951437] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:LVDS-1] probed modes:
<7> [255.951447] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [255.951514] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:LVDS-1]
<7> [255.951527] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:LVDS-1] ELD monitor
<7> [255.951535] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:LVDS-1] ELD size 20, SAD count 0
<7> [255.951642] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:LVDS-1] probed modes:
<7> [255.951652] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [255.951905] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:71:LVDS-1] EDID override reset
<7> [255.951952] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:LVDS-1]
<7> [255.951965] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:LVDS-1] ELD monitor
<7> [255.951972] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:LVDS-1] ELD size 20, SAD count 0
<7> [255.952080] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:LVDS-1] probed modes:
<7> [255.952096] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [255.952550] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:75:VGA-1] force updated from 0 to 0 or reprobing
<7> [255.952561] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [255.952571] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [255.952965] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [255.953384] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [255.953929] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [255.954331] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [255.954860] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [255.955457] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [255.955469] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [255.955826] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [255.957598] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [255.957608] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [255.957963] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [255.958456] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<7> [255.958578] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [255.958589] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [255.958956] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [255.959359] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [255.959906] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [255.960350] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [255.960879] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [255.961275] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [255.961285] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [255.961655] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [255.963323] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [255.963334] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [255.963688] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [255.964046] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<7> [255.964419] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:75:VGA-1] EDID override reset
<7> [255.964470] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [255.964480] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [255.964852] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [255.965254] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [255.965791] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [255.966201] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [255.966731] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [255.967081] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [255.967097] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [255.967493] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [255.969206] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [255.969216] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [255.969568] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [255.969923] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<7> [255.970447] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:78:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [255.970461] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-1]
<7> [255.970472] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:78:HDMI-A-1]
<7> [256.022748] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [256.039166] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [256.039184] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [256.039429] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [256.055155] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [256.055165] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [256.055406] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-1] disconnected
<7> [256.055485] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-1]
<7> [256.055493] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:78:HDMI-A-1]
<7> [256.107184] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [256.123168] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [256.123179] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [256.123420] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [256.139172] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [256.139181] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [256.139420] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-1] disconnected
<7> [256.139636] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:78:HDMI-A-1] EDID override reset
<7> [256.139669] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-1]
<7> [256.139676] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:78:HDMI-A-1]
<7> [256.191774] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [256.208191] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [256.208203] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [256.208447] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [256.224184] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [256.224194] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [256.224440] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-1] disconnected
<7> [256.224669] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:86:DP-1] EDID override reset
<7> [256.224701] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:86:DP-1]
<7> [256.224709] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:86:DP-1]
<7> [256.228996] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:86:DP-1] disconnected
<7> [256.229527] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:91:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [256.229541] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-2]
<7> [256.229552] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:91:HDMI-A-2]
<7> [256.230141] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [256.230423] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [256.230815] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [256.231054] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [256.231062] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [256.231339] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [256.232661] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [256.232669] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [256.232914] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-2] disconnected
<7> [256.232986] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-2]
<7> [256.232994] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:91:HDMI-A-2]
<7> [256.233432] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [256.233797] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [256.234373] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [256.234726] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [256.234736] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [256.235081] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [256.236771] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [256.236782] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [256.237194] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-2] disconnected
<7> [256.237506] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:91:HDMI-A-2] EDID override reset
<7> [256.237557] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-2]
<7> [256.237568] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:91:HDMI-A-2]
<7> [256.238099] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [256.238507] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [256.239038] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [256.239341] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [256.239349] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [256.239587] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [256.240854] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [256.240861] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [256.241105] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-2] disconnected
<7> [256.241472] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:95:HDMI-A-3] force updated from 0 to 0 or reprobing
<7> [256.241481] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-3]
<7> [256.241489] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-3]
<7> [256.241894] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [256.242170] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [256.242604] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [256.242842] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [256.242848] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [256.243082] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [256.244420] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [256.244428] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [256.244672] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-3] disconnected
<7> [256.244737] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-3]
<7> [256.244745] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-3]
<7> [256.245145] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [256.245432] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [256.245828] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [256.246102] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [256.246108] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [256.246371] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [256.247706] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [256.247714] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [256.247956] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-3] disconnected
<7> [256.248199] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:95:HDMI-A-3] EDID override reset
<7> [256.248252] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-3]
<7> [256.248263] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-3]
<7> [256.248698] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [256.248934] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [256.249356] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [256.249597] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [256.249603] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [256.249836] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [256.251133] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [256.251141] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [256.251385] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-3] disconnected
<7> [256.251605] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:99:DP-2] EDID override reset
<7> [256.251640] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:99:DP-2]
<7> [256.251647] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:99:DP-2]
<7> [256.255935] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:99:DP-2] disconnected
<7> [256.256166] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:103:DP-3] EDID override reset
<7> [256.256220] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-3]
<7> [256.256232] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-3]
<7> [256.260561] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-3] disconnected
<6> [256.263200] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [256.264037] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [256.269434] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [256.269448] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [256.269544] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:LVDS-1]
<7> [256.269560] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:LVDS-1] ELD monitor
<7> [256.269566] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:LVDS-1] ELD size 20, SAD count 0
<7> [256.269656] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:LVDS-1] probed modes:
<7> [256.269663] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [256.269670] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [256.269676] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [256.269945] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [256.270390] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [256.270870] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [256.271109] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [256.271628] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [256.272000] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [256.272011] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [256.272422] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [256.274202] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [256.274214] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [256.274570] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [256.274930] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<7> [256.274946] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-1]
<7> [256.274957] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:78:HDMI-A-1]
<7> [256.326756] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [256.343177] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [256.343189] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [256.343427] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [256.359173] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [256.359183] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [256.359440] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-1] disconnected
<7> [256.359451] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:86:DP-1]
<7> [256.359459] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:86:DP-1]
<7> [256.363731] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:86:DP-1] disconnected
<7> [256.363742] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-2]
<7> [256.363749] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:91:HDMI-A-2]
<7> [256.364151] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [256.364439] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [256.364836] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [256.365095] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [256.365102] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [256.365374] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [256.366724] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [256.366733] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [256.366980] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-2] disconnected
<7> [256.366989] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-3]
<7> [256.366997] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-3]
<7> [256.367435] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [256.367802] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [256.368344] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [256.368697] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [256.368707] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [256.369053] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [256.370846] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [256.370857] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [256.371274] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-3] disconnected
<7> [256.371288] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:99:DP-2]
<7> [256.371300] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:99:DP-2]
<7> [256.375718] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:99:DP-2] disconnected
<7> [256.375740] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-3]
<7> [256.375749] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-3]
<7> [256.380081] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-3] disconnected
<7> [256.380098] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:71:LVDS-1] enabled? yes
<7> [256.380107] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:75:VGA-1] enabled? no
<7> [256.380112] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:78:HDMI-A-1] enabled? no
<7> [256.380142] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:86:DP-1] enabled? no
<7> [256.380158] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:91:HDMI-A-2] enabled? no
<7> [256.380167] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:95:HDMI-A-3] enabled? no
<7> [256.380182] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:99:DP-2] enabled? no
<7> [256.380191] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:103:DP-3] enabled? no
<7> [256.380228] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [256.380266] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:71:LVDS-1] found preferred mode: 1366x768
<7> [256.380277] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1366x768 config
<7> [256.380324] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:51:pipe A] desired mode 1366x768 set (0,0)
<7> [256.385815] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [256.403018] Console: switching to colour frame buffer device 170x48
Created at 2026-02-12 01:16:04