Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.35 seconds
Igt-Version 
IGT-Version: 2.3-g2ac1ca079 (x86_64) (Linux: 6.19.0-rc6-next-20260120-next-20260120-g053966c344db+ x86_64)
Out 
Using IGT_SRANDOM=1768930112 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.349s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.349s)
Dmesg
<7> [258.892047] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_TC1
<6> [258.892356] Console: switching to colour dummy device 80x25
<6> [258.892593] [IGT] kms_force_connector_basic: executing
<7> [258.904316] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [258.905526] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [258.919154] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [258.920254] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:527:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [258.920263] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [258.920268] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [258.924483] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] disconnected
<7> [258.924507] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [258.924510] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [258.928688] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] disconnected
<7> [258.928719] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [258.928721] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [258.932946] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] disconnected
<6> [258.933204] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [258.933463] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:527:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [258.933467] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [258.933469] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [258.992568] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [258.998209] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [258.998221] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [258.998507] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [259.004007] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [259.004012] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [259.004155] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] status updated from disconnected to connected
<7> [259.004201] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] probed modes:
<7> [259.004204] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [259.004207] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [259.004210] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [259.004213] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [259.004216] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [259.004229] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [259.004304] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [259.004328] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [259.004330] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [259.063036] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [259.068695] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [259.068702] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [259.068818] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [259.074264] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [259.074269] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [259.074441] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] probed modes:
<7> [259.074444] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [259.074446] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [259.074454] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [259.074456] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [259.074459] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [259.074601] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:527:HDMI-A-1] EDID override set
<7> [259.074622] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [259.074624] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [259.074771] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:527:HDMI-A-1] ELD monitor IGT
<7> [259.074775] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:527:HDMI-A-1] ELD size 24, SAD count 0
<7> [259.133036] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [259.138633] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [259.138775] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [259.138786] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [259.138794] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] probed modes:
<7> [259.138798] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [259.138803] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [259.138806] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [259.138811] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [259.138814] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [259.138818] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [259.138942] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:527:HDMI-A-1] EDID override set
<7> [259.138961] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [259.138964] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [259.139180] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:527:HDMI-A-1] ELD monitor IGT
<7> [259.139186] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:527:HDMI-A-1] ELD size 24, SAD count 0
<7> [259.139191] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:527:HDMI-A-1] EDID changed, epoch counter 4
<7> [259.197567] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [259.203241] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [259.203357] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [259.203367] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] probed modes:
<7> [259.203371] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [259.203375] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [259.203380] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [259.203383] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [259.203386] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [259.203501] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:527:HDMI-A-1] EDID override reset
<7> [259.203521] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [259.203524] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [259.262031] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [259.267674] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [259.267680] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [259.267858] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [259.273577] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [259.273582] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [259.273705] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:527:HDMI-A-1] EDID changed, epoch counter 5
<7> [259.273741] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [259.273746] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [259.273751] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] probed modes:
<7> [259.273754] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [259.273756] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [259.273758] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [259.273761] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [259.273763] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [259.273862] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:527:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [259.273864] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [259.273867] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [259.278071] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] status updated from connected to disconnected
<7> [259.278076] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] disconnected
<7> [259.278092] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [259.278128] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [259.278146] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [259.278148] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [259.282354] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] disconnected
<6> [259.282860] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [259.283592] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [259.285397] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:506:eDP-1] force updated from 0 to 0 or reprobing
<7> [259.285405] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1]
<7> [259.285410] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:506:eDP-1]
<7> [259.286103] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [259.286673] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [259.286819] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [259.286957] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [259.287120] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [259.287124] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD monitor
<7> [259.287127] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD size 20, SAD count 0
<7> [259.287139] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] VRR capable: no
<7> [259.287273] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [259.287405] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [259.288945] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] probed modes:
<7> [259.288967] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [259.289840] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1]
<7> [259.289844] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:506:eDP-1]
<7> [259.290447] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [259.290830] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [259.290954] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [259.291101] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [259.291232] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [259.291235] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD monitor
<7> [259.291238] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD size 20, SAD count 0
<7> [259.291248] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] VRR capable: no
<7> [259.291369] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [259.291490] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [259.292475] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] probed modes:
<7> [259.292478] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [259.292550] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:506:eDP-1] EDID override reset
<7> [259.292562] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1]
<7> [259.292564] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:506:eDP-1]
<7> [259.293100] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [259.293606] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [259.293729] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [259.293845] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [259.293970] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [259.293973] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD monitor
<7> [259.293975] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD size 20, SAD count 0
<7> [259.293984] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] VRR capable: no
<7> [259.294114] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [259.294231] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [259.294909] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] probed modes:
<7> [259.294911] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [259.294977] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:515:DP-1] EDID override reset
<7> [259.294988] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:DP-1]
<7> [259.294997] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:515:DP-1]
<7> [259.299222] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:DP-1] disconnected
<7> [259.299333] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:527:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [259.299337] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [259.299340] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [259.303589] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] disconnected
<7> [259.303612] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [259.303615] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [259.307828] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] disconnected
<7> [259.307896] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:527:HDMI-A-1] EDID override reset
<7> [259.307907] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [259.307910] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [259.312126] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] disconnected
<7> [259.312198] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:533:DP-2] EDID override reset
<7> [259.312210] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2]
<7> [259.312212] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:533:DP-2]
<7> [259.312608] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_TC1
<7> [259.335397] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [259.357114] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [259.378832] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [259.400549] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [259.422275] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [259.444017] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [259.465735] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [259.487453] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [259.509144] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [259.530888] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [259.552638] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [259.574356] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [259.596046] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [259.617759] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [259.639477] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [259.661196] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [259.682914] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [259.704663] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [259.726380] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [259.748098] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [259.769815] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [259.791566] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [259.811012] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [259.811016] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [259.811029] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [259.813274] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [259.835002] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [259.856752] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [259.878503] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [259.900221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [259.921938] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [259.943723] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [259.965440] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [259.987125] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [260.008870] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [260.009070] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -110
<7> [260.009086] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] disconnected
<7> [260.009193] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:542:DP-3] EDID override reset
<7> [260.009212] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3]
<7> [260.009217] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:542:DP-3]
<7> [260.009554] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_TC1
<7> [260.010055] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [260.010284] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3] disconnected
<7> [260.010370] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:551:DP-4] EDID override reset
<7> [260.010387] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:DP-4]
<7> [260.010390] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:551:DP-4]
<7> [260.010610] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [260.010789] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:DP-4] disconnected
<7> [260.010846] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:560:DP-5] EDID override reset
<7> [260.010856] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:560:DP-5]
<7> [260.010858] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:560:DP-5]
<7> [260.011083] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [260.011285] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:560:DP-5] disconnected
<6> [260.011817] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [260.012370] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [260.024458] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [260.024462] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [260.024506] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1]
<7> [260.024510] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:506:eDP-1]
<7> [260.025091] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [260.025700] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [260.025850] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [260.025992] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [260.026133] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [260.026137] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD monitor
<7> [260.026140] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD size 20, SAD count 0
<7> [260.026151] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] VRR capable: no
<7> [260.026274] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [260.026393] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [260.027243] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] probed modes:
<7> [260.027246] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [260.027250] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:DP-1]
<7> [260.027253] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:515:DP-1]
<7> [260.031444] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:DP-1] disconnected
<7> [260.031447] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1]
<7> [260.031450] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1]
<7> [260.035682] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] disconnected
<7> [260.035685] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2]
<7> [260.035687] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:533:DP-2]
<7> [260.036085] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_TC1
<7> [260.058389] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [260.080112] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [260.101832] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [260.123575] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [260.145325] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [260.167043] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [260.188761] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [260.210512] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [260.232229] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [260.253947] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [260.275730] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [260.297519] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [260.319231] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [260.340949] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [260.362732] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [260.384483] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [260.406200] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [260.427951] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [260.449734] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [260.471453] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [260.493169] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [260.514887] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [260.536638] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [260.558356] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [260.580073] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [260.601795] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [260.623574] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [260.645269] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [260.666986] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [260.688729] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [260.710478] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [260.732196] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)
<7> [260.732369] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -110
<7> [260.732384] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] disconnected
<7> [260.732388] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3]
<7> [260.732392] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:542:DP-3]
<7> [260.732737] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3] disconnected
<7> [260.732743] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:DP-4]
<7> [260.732747] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:551:DP-4]
<7> [260.733205] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:DP-4] disconnected
<7> [260.733209] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:560:DP-5]
<7> [260.733211] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:560:DP-5]
<7> [260.733492] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:560:DP-5] disconnected
<7> [260.733494] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:eDP-1] enabled? yes
<7> [260.733497] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:515:DP-1] enabled? no
<7> [260.733499] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:527:HDMI-A-1] enabled? no
<7> [260.733500] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:DP-2] enabled? no
<7> [260.733502] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:DP-3] enabled? no
<7> [260.733503] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:551:DP-4] enabled? no
<7> [260.733505] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:560:DP-5] enabled? no
<7> [260.733535] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [260.733551] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:eDP-1] found preferred mode: 2880x1800
<7> [260.733554] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7> [260.733579] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0)
<7> [260.745366] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [260.756340] Console: switching to colour frame buffer device 180x56
Created at 2026-01-21 04:57:24