Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.04 seconds
Igt-Version 
IGT-Version: 2.3-gc45426aaf (x86_64) (Linux: 6.19.0-rc5-next-20260116-next-20260116-g46fe65a2c28e+ x86_64)
Out 
Using IGT_SRANDOM=1768572749 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.036s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.036s)
Dmesg
<6> [164.594833] Console: switching to colour dummy device 80x25
<6> [164.595386] [IGT] kms_force_connector_basic: executing
<7> [164.599535] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [164.600572] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [164.601702] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [164.603129] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:126:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [164.603154] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]
<7> [164.603168] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]
<7> [164.603689] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [164.603976] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [164.604504] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [164.604909] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [164.604920] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [164.605262] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [164.609162] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [164.609172] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [164.609466] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected
<7> [164.609537] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]
<7> [164.609546] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]
<7> [164.610078] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [164.610434] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [164.610964] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [164.611346] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [164.611355] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [164.611617] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [164.614687] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [164.614696] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [164.615036] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected
<7> [164.615567] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:138:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [164.615580] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]
<7> [164.615592] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]
<7> [164.616232] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [164.616570] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [164.617091] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [164.617418] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [164.617427] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [164.617679] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [164.620781] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [164.620800] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [164.621118] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected
<7> [164.621209] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]
<7> [164.621221] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]
<7> [164.621732] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [164.621996] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [164.622502] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [164.622769] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [164.622779] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [164.623067] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [164.626206] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [164.626214] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [164.626486] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected
<7> [164.626528] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]
<7> [164.626535] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]
<7> [164.627012] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [164.627355] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [164.627882] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [164.628243] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [164.628253] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [164.628513] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [164.631564] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [164.631576] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [164.631881] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected
<6> [164.632488] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [164.633094] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:126:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [164.633106] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]
<7> [164.633114] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:126:HDMI-A-1]
<7> [164.633651] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [164.633928] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [164.634436] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [164.634726] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [164.634745] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [164.635021] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [164.638229] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [164.638248] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [164.638590] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] status updated from disconnected to connected
<7> [164.638726] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] probed modes:
<7> [164.638733] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [164.638741] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [164.638748] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [164.638755] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [164.638762] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [164.638793] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [164.638918] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [164.639001] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]
<7> [164.639012] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:126:HDMI-A-1]
<7> [164.639535] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [164.639780] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [164.640317] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [164.640687] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [164.640705] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [164.641039] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [164.644195] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [164.644215] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [164.644768] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] probed modes:
<7> [164.644779] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [164.644790] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [164.644801] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [164.644810] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [164.644820] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [164.645350] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:126:HDMI-A-1] EDID override set
<7> [164.645398] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]
<7> [164.645409] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:126:HDMI-A-1]
<7> [164.645941] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:126:HDMI-A-1] ELD monitor IGT
<7> [164.645951] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:126:HDMI-A-1] ELD size 24, SAD count 0
<7> [164.646218] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [164.646557] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [164.647190] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [164.647585] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [164.648024] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [164.648046] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [164.648063] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] probed modes:
<7> [164.648073] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [164.648084] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [164.648094] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [164.648104] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [164.648114] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [164.648125] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [164.648477] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:126:HDMI-A-1] EDID override set
<7> [164.648538] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]
<7> [164.648549] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:126:HDMI-A-1]
<7> [164.649178] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:126:HDMI-A-1] ELD monitor IGT
<7> [164.649190] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:126:HDMI-A-1] ELD size 24, SAD count 0
<7> [164.649198] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:126:HDMI-A-1] EDID changed, epoch counter 4
<7> [164.649465] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [164.649798] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [164.650399] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [164.650760] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [164.651082] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [164.651104] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] probed modes:
<7> [164.651113] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [164.651123] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [164.651133] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [164.651143] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [164.651152] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [164.651430] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:126:HDMI-A-1] EDID override reset
<7> [164.651489] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]
<7> [164.651499] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:126:HDMI-A-1]
<7> [164.652114] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [164.652405] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [164.652803] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [164.653140] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [164.653159] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [164.653401] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [164.656448] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [164.656461] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [164.656691] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:126:HDMI-A-1] EDID changed, epoch counter 5
<7> [164.656831] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [164.656909] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [164.656926] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] probed modes:
<7> [164.656935] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [164.656945] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [164.656955] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [164.656964] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [164.656973] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [164.657406] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:126:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [164.657416] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]
<7> [164.657425] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]
<7> [164.657941] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [164.658225] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [164.658628] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [164.658941] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [164.658951] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [164.659183] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [164.662292] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [164.662301] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [164.662560] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] status updated from connected to disconnected
<7> [164.662575] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected
<7> [164.662626] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [164.662717] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [164.662779] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]
<7> [164.662788] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]
<7> [164.663312] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [164.663652] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [164.664201] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [164.664556] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [164.664566] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [164.664937] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [164.668038] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [164.668050] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [164.668436] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected
<6> [164.669237] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [164.669882] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [164.670826] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:109:eDP-1] force updated from 0 to 0 or reprobing
<7> [164.670892] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]
<7> [164.670905] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]
<7> [164.671308] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
<7> [164.671643] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
<7> [164.672007] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
<7> [164.672385] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [164.672397] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor
<7> [164.672406] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0
<7> [164.672440] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no
<7> [164.672741] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [164.673030] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no
<7> [164.674115] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes:
<7> [164.674125] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa
<7> [164.674134] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa
<7> [164.674204] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]
<7> [164.674212] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]
<7> [164.674488] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
<7> [164.674728] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
<7> [164.675195] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
<7> [164.675471] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [164.675480] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor
<7> [164.675488] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0
<7> [164.675520] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no
<7> [164.675755] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [164.676014] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no
<7> [164.677108] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes:
<7> [164.677117] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa
<7> [164.677125] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa
<7> [164.677328] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:109:eDP-1] EDID override reset
<7> [164.677363] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]
<7> [164.677371] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]
<7> [164.677643] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
<7> [164.677940] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
<7> [164.678257] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
<7> [164.678521] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [164.678528] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor
<7> [164.678534] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0
<7> [164.678556] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no
<7> [164.678960] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [164.679293] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no
<7> [164.680411] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes:
<7> [164.680420] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa
<7> [164.680428] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa
<7> [164.680635] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:117:DP-1] EDID override reset
<7> [164.680666] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]
<7> [164.680674] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]
<7> [164.685081] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected
<7> [164.685392] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:126:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [164.685402] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]
<7> [164.685410] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]
<7> [164.685903] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [164.686224] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [164.686735] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [164.687135] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [164.687145] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [164.687454] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [164.690533] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [164.690542] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [164.690793] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected
<7> [164.690879] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]
<7> [164.690891] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]
<7> [164.691474] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [164.691794] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [164.692241] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [164.692507] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [164.692515] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [164.692825] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [164.696000] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [164.696008] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [164.696245] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected
<7> [164.696438] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:126:HDMI-A-1] EDID override reset
<7> [164.696469] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]
<7> [164.696476] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]
<7> [164.696940] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [164.697249] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [164.697736] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [164.698106] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [164.698115] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [164.698392] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [164.701412] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [164.701421] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [164.701685] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected
<7> [164.701927] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:132:DP-2] EDID override reset
<7> [164.701974] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]
<7> [164.701984] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]
<7> [164.706328] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected
<7> [164.706637] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:138:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [164.706646] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]
<7> [164.706654] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]
<7> [164.707173] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [164.707501] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [164.708056] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [164.708339] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [164.708347] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [164.708569] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [164.711703] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [164.711712] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [164.711999] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected
<7> [164.712083] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]
<7> [164.712094] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]
<7> [164.712682] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [164.713070] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [164.713541] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [164.713786] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [164.713792] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [164.714053] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [164.717164] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [164.717173] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [164.717407] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected
<7> [164.717593] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:138:HDMI-A-2] EDID override reset
<7> [164.717624] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]
<7> [164.717631] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]
<7> [164.718113] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [164.718365] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [164.718762] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [164.719080] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [164.719089] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [164.719333] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [164.722317] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [164.722325] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [164.722560] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected
<6> [164.723692] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [164.724293] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [164.747600] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [164.747609] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [164.747695] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]
<7> [164.747704] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]
<7> [164.748179] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
<7> [164.748510] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
<7> [164.748810] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
<7> [164.749126] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [164.749134] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor
<7> [164.749140] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0
<7> [164.749164] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no
<7> [164.749391] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [164.749607] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no
<7> [164.750826] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes:
<7> [164.750852] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa
<7> [164.750862] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa
<7> [164.750882] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]
<7> [164.750893] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]
<7> [164.755239] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected
<7> [164.755251] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]
<7> [164.755259] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]
<7> [164.755734] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [164.756005] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [164.756459] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [164.756704] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [164.756712] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [164.756938] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [164.760062] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [164.760071] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [164.760308] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected
<7> [164.760318] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]
<7> [164.760326] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]
<7> [164.764646] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected
<7> [164.764657] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]
<7> [164.764664] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]
<7> [164.765204] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [164.765523] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [164.766014] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [164.766342] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [164.766352] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [164.766577] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [164.769636] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [164.769645] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [164.769925] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected
<7> [164.769938] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? yes
<7> [164.769948] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no
<7> [164.769956] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no
<7> [164.769963] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no
<7> [164.769971] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no
<7> [164.770016] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [164.770046] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] found preferred mode: 3200x1800
<7> [164.770055] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config
<7> [164.770089] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:57:pipe A] desired mode 3200x1800 set (0,0)
<7> [164.780955] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [164.797698] Console: switching to colour frame buffer device 200x56
Created at 2026-01-16 19:17:38