Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.27 seconds
Igt-Version 
IGT-Version: 2.3-g7db7baf40 (x86_64) (Linux: 6.19.0-rc1-next-20251218-next-20251218-g1058ca9db0ed+ x86_64)
Out 
Using IGT_SRANDOM=1766058377 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.273s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.273s)
Dmesg
<6> [250.153734] Console: switching to colour dummy device 80x25
<6> [250.155206] [IGT] kms_force_connector_basic: executing
<7> [250.175880] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [250.181176] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [250.183301] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [250.188733] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:119:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [250.188771] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.188795] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.189824] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.190748] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.194681] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.197070] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.198058] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.200922] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.202156] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.202186] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.203426] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.208344] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.208382] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.209700] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.211610] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.214660] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<7> [250.214952] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.214976] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.216439] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.217411] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.219784] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.223977] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.224832] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.226144] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.227174] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.227202] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.230660] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.234311] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.234345] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.237350] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.239335] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.242668] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<7> [250.244114] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:128:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [250.244145] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2]
<7> [250.244167] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [250.245600] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.246376] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.248535] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.252352] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.253352] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [250.254905] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.256025] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.256055] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.257255] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [250.262394] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.262430] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [250.263692] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.265420] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.268345] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2] disconnected
<7> [250.269173] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2]
<7> [250.269201] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [250.270596] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.271371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.273563] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.276820] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.277795] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [250.280318] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.281970] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.282002] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.283258] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [250.288225] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.288261] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [250.289524] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.292532] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.294012] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2] disconnected
<7> [250.294376] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.294399] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.295749] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.296721] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.300341] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.303821] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.304756] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.306095] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.307161] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.307190] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.308397] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.313271] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.313307] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.314654] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.316563] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.317411] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<6> [250.320243] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [250.323656] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:119:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [250.323692] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.323715] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.325781] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.326748] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.328817] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.332569] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.333328] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.334778] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.335810] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.335862] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.337102] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.342793] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.342846] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.345279] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.347529] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.348939] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] status updated from disconnected to connected
<7> [250.349022] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [250.352588] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [250.358034] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] probed modes:
<7> [250.358067] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [250.358087] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [250.358104] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [250.358122] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [250.358139] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [250.358421] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.358444] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.364623] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.365400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.370446] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.381910] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.382850] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.387031] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.391662] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.391723] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.399564] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.411619] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.411679] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.412454] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.422153] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.428090] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] probed modes:
<7> [250.428126] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [250.428145] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [250.428162] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [250.428178] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [250.428194] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [250.431374] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:119:HDMI-A-1] EDID override set
<7> [250.436671] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.436708] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.439778] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.440744] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.446833] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.448983] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:119:HDMI-A-1] ELD monitor IGT
<7> [250.449013] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:119:HDMI-A-1] ELD size 24, SAD count 0
<7> [250.450654] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [250.451409] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.454256] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [250.455904] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [250.455984] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.457904] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.459664] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [250.459709] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [250.459744] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] probed modes:
<7> [250.459764] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [250.459781] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [250.459798] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [250.459815] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [250.459832] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [250.459848] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [250.462552] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:119:HDMI-A-1] EDID override set
<7> [250.463847] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.463877] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.465764] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.466681] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.468863] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.471788] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:119:HDMI-A-1] ELD monitor IGT
<7> [250.471825] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:119:HDMI-A-1] ELD size 24, SAD count 0
<7> [250.471844] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:119:HDMI-A-1] EDID changed, epoch counter 5
<7> [250.473638] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [250.474399] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.476261] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [250.477989] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [250.478071] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.481417] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.483394] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [250.483442] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] probed modes:
<7> [250.483534] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [250.483565] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [250.483584] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [250.483601] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [250.483618] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [250.484817] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:119:HDMI-A-1] EDID override reset
<7> [250.484962] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.485011] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.487675] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.488446] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.491820] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.495278] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.496237] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.497788] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.498769] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.498821] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.501663] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.505404] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.505459] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.506789] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:119:HDMI-A-1] EDID changed, epoch counter 6
<7> [250.507306] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.509265] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.512976] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [250.513033] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [250.513069] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] probed modes:
<7> [250.513088] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [250.513105] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [250.513122] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [250.513139] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [250.513155] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [250.514634] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:119:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [250.514677] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.514702] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.517552] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.518325] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.521613] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.524031] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.524892] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.527659] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.528887] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.528917] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.530092] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.534457] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.535719] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.537016] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.539549] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.540939] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] status updated from connected to disconnected
<7> [250.540996] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<7> [250.541045] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [250.544548] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [250.550018] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.550058] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.556688] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.557588] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.559568] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.567770] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.568627] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.574652] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.575682] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.575712] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.583177] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.587442] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.587562] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.588446] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.592235] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.593322] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<6> [250.596584] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [250.599991] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [250.605944] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:112:DP-1] EDID override reset
<7> [250.606080] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:DP-1]
<7> [250.606106] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:112:DP-1]
<7> [250.610046] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.611011] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.612855] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.618295] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:DP-1] disconnected
<7> [250.618442] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:112:DP-1]
<7> [250.624040] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.625994] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.626908] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.629819] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.630825] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.630855] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.632016] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.636828] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.636865] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.638241] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:124:DP-2]
<7> [250.643448] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [250.646691] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.647630] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [250.648918] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.649957] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.649988] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.653282] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [250.656414] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.656446] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [250.660741] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.662690] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.664207] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:119:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [250.664239] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.664262] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.667401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.668505] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.670963] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.674803] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.675687] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.677069] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.678326] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.678356] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.679666] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.684728] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.684764] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.686001] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.688442] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.690449] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<7> [250.691026] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.691053] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.692349] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.693247] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.696523] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.698613] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.699412] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.702391] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.703788] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.703817] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.704982] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.709001] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.709039] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.711629] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.713645] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.714947] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<7> [250.716236] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:119:HDMI-A-1] EDID override reset
<7> [250.716348] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.716372] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.719301] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.720245] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.722746] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.726981] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.727901] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.729182] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.730191] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.730220] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.733292] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.736358] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.736389] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.738818] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.741316] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.742434] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<7> [250.744590] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:124:DP-2] EDID override reset
<7> [250.745765] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:DP-2]
<7> [250.745799] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:124:DP-2]
<7> [250.747089] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.748016] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.751573] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.756849] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:DP-2] disconnected
<7> [250.757017] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:112:DP-1]
<7> [250.762483] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.763824] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.764694] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.765646] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.766570] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.766600] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.767738] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.771639] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.771677] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.773062] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:124:DP-2]
<7> [250.778200] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [250.779997] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.781065] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [250.782378] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.783341] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.783370] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.785603] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [250.789772] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.789808] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [250.791622] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.795173] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.796438] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:128:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [250.796536] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2]
<7> [250.796791] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [250.797876] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.798836] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.802535] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.804287] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.805233] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [250.807617] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.808445] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.808611] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.810584] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [250.814440] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.814544] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [250.815423] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.819234] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.820308] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2] disconnected
<7> [250.820906] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2]
<7> [250.820933] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [250.823622] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.824634] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.827806] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.831698] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.832610] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [250.833953] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.834907] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.834936] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.836169] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [250.841755] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.841789] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [250.843751] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.846587] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.847947] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2] disconnected
<7> [250.849312] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:128:HDMI-A-2] EDID override reset
<7> [250.849435] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2]
<7> [250.850749] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [250.851695] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.852601] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.855798] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.858715] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.859585] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [250.861721] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.862834] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.862863] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.864108] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [250.868435] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.868513] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [250.869343] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.871611] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.872919] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2] disconnected
<6> [250.878924] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [250.882153] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [250.886653] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.890362] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [250.890392] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [250.891873] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:DP-1]
<7> [250.891908] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:112:DP-1]
<7> [250.893292] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.896410] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.901811] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:DP-1] disconnected
<7> [250.901860] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.901883] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.904237] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.905139] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.908184] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.909877] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.909908] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.911031] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.916251] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.917939] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.919128] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.922577] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.923426] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<7> [250.923813] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:DP-2]
<7> [250.923839] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:124:DP-2]
<7> [250.925148] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.926101] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.931162] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.936964] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:DP-2] disconnected
<7> [250.937014] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2]
<7> [250.937038] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [250.939872] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.940783] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [250.942705] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.943791] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.943822] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.946592] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [250.950444] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.950528] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [250.951428] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2] disconnected
<7> [250.951933] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [250.951953] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:112:DP-1] enabled? no
<7> [250.951989] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:HDMI-A-1] enabled? no
<7> [250.952005] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:124:DP-2] enabled? no
<7> [250.952020] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-2] enabled? no
<7> [250.953678] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [250.953729] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1024x768 config
<7> [250.954041] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:112:DP-1]
<7> [250.959220] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.961849] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.962745] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.964400] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.965817] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.965848] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.967018] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.971434] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.971755] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.973674] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:124:DP-2]
<7> [250.981341] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [250.982757] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.983660] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [250.984912] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.985809] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.985838] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.986970] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [250.992330] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.992366] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [250.994661] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.997492] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.998798] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [251.001667] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [251.011321] Console: switching to colour frame buffer device 128x48
<7> [251.032644] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
Created at 2025-12-18 15:22:35