Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.22 seconds
Igt-Version 
IGT-Version: 2.2-g79d17ef4e (x86_64) (Linux: 6.19.0-rc1-next-20251216-next-20251216-g563c8dd425b5+ x86_64)
Out 
Using IGT_SRANDOM=1765851334 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.224s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.224s)
Dmesg
<6> [250.121920] Console: switching to colour dummy device 80x25
<6> [250.125374] [IGT] kms_force_connector_basic: executing
<7> [250.141291] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [250.146867] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [250.149671] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [250.157902] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:119:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [250.157950] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.160374] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.161590] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.162548] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.165622] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.169208] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.170118] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.172517] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.174715] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.174747] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.179437] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.185161] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.185196] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.187275] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.189522] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.190482] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<7> [250.193146] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.193183] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.195398] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.196363] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.199275] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.203208] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.203961] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.206188] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.207155] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.207182] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.208872] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.215192] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.215226] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.217740] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.221846] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.222807] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<7> [250.227047] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:128:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [250.227081] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2]
<7> [250.227102] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [250.227928] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.228875] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.231927] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.237078] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.237929] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [250.241439] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.243156] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.243185] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.244908] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [250.250524] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.250558] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [250.254866] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.258066] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.259126] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2] disconnected
<7> [250.260025] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2]
<7> [250.260054] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [250.260929] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.261886] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.265263] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.267542] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.268487] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [250.271175] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.272435] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.272462] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.274171] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [250.277811] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.278622] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [250.280506] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.282780] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.284741] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2] disconnected
<7> [250.286394] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.286429] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.288132] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.288941] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.292332] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.296019] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.296777] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.298397] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.299360] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.299386] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.301951] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.305894] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.306863] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.308538] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.310528] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.311480] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<6> [250.313798] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [250.315838] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:119:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [250.315873] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.315893] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.317453] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.318392] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.321388] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.325443] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.326383] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.329550] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.330718] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.330772] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.331745] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.336539] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.336594] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.337581] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.339817] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.340727] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] status updated from disconnected to connected
<7> [250.340819] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [250.342425] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [250.344126] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] probed modes:
<7> [250.344154] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [250.344171] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [250.344187] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [250.344202] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [250.344218] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [250.344558] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.344580] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.345642] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.346558] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.350392] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.354369] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.355215] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.358699] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.359642] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.359694] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.365043] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.370804] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.370860] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.375017] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.377124] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.380401] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] probed modes:
<7> [250.380431] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [250.380448] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [250.380464] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [250.380479] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [250.380494] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [250.383246] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:119:HDMI-A-1] EDID override set
<7> [250.383363] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.383384] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.387178] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.388227] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.390332] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.397221] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:119:HDMI-A-1] ELD monitor IGT
<7> [250.397254] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:119:HDMI-A-1] ELD size 24, SAD count 0
<7> [250.397690] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [250.398559] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.405053] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [250.405902] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [250.406188] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.408759] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.412617] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [250.412664] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [250.412698] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] probed modes:
<7> [250.412716] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [250.412732] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [250.412747] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [250.412762] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [250.412776] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [250.412791] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [250.416866] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:119:HDMI-A-1] EDID override set
<7> [250.417177] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.417198] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.422439] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.423443] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.429238] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.431956] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:119:HDMI-A-1] ELD monitor IGT
<7> [250.432050] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:119:HDMI-A-1] ELD size 24, SAD count 0
<7> [250.432069] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:119:HDMI-A-1] EDID changed, epoch counter 5
<7> [250.432943] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [250.433894] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.435569] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [250.436617] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [250.436693] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.439052] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.441339] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [250.441393] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] probed modes:
<7> [250.441413] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [250.441432] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [250.441449] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [250.441467] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [250.441484] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [250.443051] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:119:HDMI-A-1] EDID override reset
<7> [250.443203] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.443223] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.444860] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.445744] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.448222] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.449880] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.450898] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.452759] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.453710] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.453763] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.455437] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.458673] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.458721] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.460302] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:119:HDMI-A-1] EDID changed, epoch counter 6
<7> [250.460365] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.462650] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.464079] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [250.464130] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [250.464163] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] probed modes:
<7> [250.464180] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [250.464196] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [250.464210] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [250.464225] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [250.464240] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [250.466244] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:119:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [250.466280] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.466302] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.468083] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.468891] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.471283] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.472933] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.473902] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.475663] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.476622] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.476651] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.478420] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.481714] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.481743] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.483323] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.485687] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.486842] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] status updated from connected to disconnected
<7> [250.486924] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<7> [250.487648] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [250.491356] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [250.501452] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.501489] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.507177] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.508080] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.513005] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.519403] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.520322] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.525871] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.526926] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.526953] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.528648] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.532170] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.532201] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.533824] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.536758] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.537829] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<6> [250.540826] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [250.545268] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [250.551519] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:112:DP-1] EDID override reset
<7> [250.551630] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:DP-1]
<7> [250.551652] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:112:DP-1]
<7> [250.553419] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.554340] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.559231] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.564823] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:DP-1] disconnected
<7> [250.565467] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:112:DP-1]
<7> [250.571172] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.572878] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.573733] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.575423] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.576367] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.576395] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.579785] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.583158] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.583188] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.584817] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:124:DP-2]
<7> [250.589943] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [250.593458] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.594322] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [250.595829] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.596743] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.596772] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.598283] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [250.603613] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.603646] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [250.605061] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.607234] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:119:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [250.607265] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.607285] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.609456] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.613136] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.613906] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.616576] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.620224] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.621107] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.622903] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.624725] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.624768] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.627239] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.631555] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.631586] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.634802] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.636477] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.637467] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<7> [250.640282] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.640318] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.641835] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.642705] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.645177] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.649478] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.650346] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.651942] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.652917] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.652942] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.656275] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.659650] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.659680] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.664098] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.666133] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.669438] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<7> [250.670866] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:119:HDMI-A-1] EDID override reset
<7> [250.671422] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.671447] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.674367] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.675244] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.678279] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.680739] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.681655] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.684714] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.685927] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.685953] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.688108] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.692660] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.692692] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.695944] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.698084] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.699147] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<7> [250.702617] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:124:DP-2] EDID override reset
<7> [250.702726] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:DP-2]
<7> [250.702749] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:124:DP-2]
<7> [250.704378] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.705269] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.709608] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.715049] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:DP-2] disconnected
<7> [250.715233] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:112:DP-1]
<7> [250.721033] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.722592] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.723437] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.725092] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.725914] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.725942] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.728086] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.732851] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.732887] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.734591] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:124:DP-2]
<7> [250.739681] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [250.742883] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.743765] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [250.745314] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.746643] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.746672] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.749478] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [250.753165] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.753197] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [250.756477] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.758551] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.760848] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:128:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [250.760880] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2]
<7> [250.760902] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [250.762153] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.763070] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.766884] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.769388] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.770296] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [250.774118] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.774941] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.775093] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.776319] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [250.782108] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.782142] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [250.784222] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.786209] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.787168] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2] disconnected
<7> [250.788208] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2]
<7> [250.788240] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [250.791770] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.792734] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.795341] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.799363] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.800208] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [250.802416] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.803622] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.803649] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.805161] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [250.810266] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.810298] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [250.813204] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.815837] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.816946] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2] disconnected
<7> [250.819734] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:128:HDMI-A-2] EDID override reset
<7> [250.819841] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2]
<7> [250.819863] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [250.821545] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.822506] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.825297] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.830099] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.830853] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [250.832463] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.833374] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.833400] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.835136] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [250.840856] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.840889] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [250.842508] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.846323] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.847442] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2] disconnected
<6> [250.853335] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [250.857882] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [250.864843] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.868707] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [250.868735] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [250.868949] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:DP-1]
<7> [250.869505] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:112:DP-1]
<7> [250.872081] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.876389] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.881782] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:DP-1] disconnected
<7> [250.881829] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.881851] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.885383] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.886302] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.888223] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.889329] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.889356] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.893038] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.897278] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.897314] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.898877] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.903068] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.903949] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<7> [250.904855] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:DP-2]
<7> [250.904886] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:124:DP-2]
<7> [250.908486] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.909408] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.911696] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.917196] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:DP-2] disconnected
<7> [250.917240] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2]
<7> [250.917261] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [250.920437] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.921299] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [250.923731] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.925017] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.925045] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.926120] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [250.931440] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.931473] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [250.934760] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2] disconnected
<7> [250.934800] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [250.934816] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:112:DP-1] enabled? no
<7> [250.934830] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:HDMI-A-1] enabled? no
<7> [250.934842] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:124:DP-2] enabled? no
<7> [250.934854] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-2] enabled? no
<7> [250.934948] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [250.935086] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1024x768 config
<7> [250.935330] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:112:DP-1]
<7> [250.940404] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.942194] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.942944] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.944169] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.945079] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.945106] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.945841] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.952839] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.952876] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.954587] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:124:DP-2]
<7> [250.963417] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [250.963772] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [250.965330] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.966208] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [250.969280] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.970216] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.970244] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.971728] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [250.976805] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.976835] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [250.980677] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.984159] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.985640] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<6> [250.988136] Console: switching to colour frame buffer device 128x48
<7> [251.008120] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
Created at 2025-12-16 07:44:26