Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.04 seconds
Igt-Version 
IGT-Version: 2.2-gb1ad5288c (x86_64) (Linux: 6.18.0-next-20251209-next-20251209-gc75caf76ed86+ x86_64)
Out 
Using IGT_SRANDOM=1765254654 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.039s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.039s)
Dmesg
<6> [169.832701] Console: switching to colour dummy device 80x25
<6> [169.833335] [IGT] kms_force_connector_basic: executing
<7> [169.836774] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [169.837870] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [169.838585] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [169.840131] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:123:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [169.840145] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]
<7> [169.840158] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]
<7> [169.840816] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.841164] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [169.841708] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.842221] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.842232] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [169.842577] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [169.845903] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.845914] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [169.846319] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected
<7> [169.846410] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]
<7> [169.846421] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]
<7> [169.847050] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.847404] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [169.847932] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.848314] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.848323] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [169.848671] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [169.851915] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.851926] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [169.852313] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected
<7> [169.852865] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:135:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [169.852877] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]
<7> [169.852888] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]
<7> [169.853521] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [169.853894] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [169.854374] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [169.854757] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [169.854767] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [169.855131] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [169.858461] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [169.858473] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [169.858877] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected
<7> [169.858965] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]
<7> [169.858975] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]
<7> [169.859614] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [169.859982] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [169.860514] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [169.860905] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [169.860914] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [169.861262] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [169.864456] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [169.864466] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [169.864882] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected
<7> [169.864936] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]
<7> [169.864946] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]
<7> [169.865582] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.865905] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [169.866433] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.866839] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.866849] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [169.867193] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [169.870393] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.870404] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [169.870786] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected
<6> [169.871598] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [169.872341] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:123:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [169.872354] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]
<7> [169.872365] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:123:HDMI-A-1]
<7> [169.873001] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.873344] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [169.873882] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.874258] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.874278] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [169.874617] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [169.877981] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.878000] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [169.878368] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] status updated from disconnected to connected
<7> [169.878402] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [169.878529] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [169.878718] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] probed modes:
<7> [169.878728] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [169.878739] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [169.878749] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [169.878760] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [169.878770] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [169.878888] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]
<7> [169.878898] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:123:HDMI-A-1]
<7> [169.879512] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.879885] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [169.880406] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.880782] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.880829] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [169.881112] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [169.884354] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.884374] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [169.884972] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] probed modes:
<7> [169.884983] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [169.884993] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [169.885003] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [169.885013] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [169.885022] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [169.885465] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:123:HDMI-A-1] EDID override set
<7> [169.885513] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]
<7> [169.885522] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:123:HDMI-A-1]
<7> [169.885991] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:123:HDMI-A-1] ELD monitor IGT
<7> [169.886000] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:123:HDMI-A-1] ELD size 24, SAD count 0
<7> [169.886262] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [169.886604] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [169.887151] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [169.887527] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [169.887900] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [169.887921] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [169.887938] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] probed modes:
<7> [169.887947] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [169.887957] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [169.887966] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [169.887975] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [169.887984] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [169.887993] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [169.888359] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:123:HDMI-A-1] EDID override set
<7> [169.888421] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]
<7> [169.888431] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:123:HDMI-A-1]
<7> [169.888911] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:123:HDMI-A-1] ELD monitor IGT
<7> [169.888920] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:123:HDMI-A-1] ELD size 24, SAD count 0
<7> [169.888928] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:123:HDMI-A-1] EDID changed, epoch counter 4
<7> [169.889196] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [169.889494] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [169.890098] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [169.890479] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [169.890893] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [169.890915] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] probed modes:
<7> [169.890925] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [169.890935] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [169.890945] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [169.890954] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [169.890964] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [169.891282] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:123:HDMI-A-1] EDID override reset
<7> [169.891344] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]
<7> [169.891354] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:123:HDMI-A-1]
<7> [169.892030] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.892372] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [169.892905] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.893276] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.893295] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [169.893631] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [169.896924] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.896943] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [169.897293] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:123:HDMI-A-1] EDID changed, epoch counter 5
<7> [169.897510] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [169.897530] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [169.897547] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] probed modes:
<7> [169.897556] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [169.897566] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [169.897576] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [169.897585] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [169.897595] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [169.898089] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:123:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [169.898101] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]
<7> [169.898112] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]
<7> [169.898733] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.899128] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [169.899645] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.900028] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.900038] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [169.900377] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [169.903698] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.903708] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [169.904103] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] status updated from connected to disconnected
<7> [169.904124] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected
<7> [169.904144] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [169.904782] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [169.904943] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]
<7> [169.904956] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]
<7> [169.905574] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.905940] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [169.906461] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.907063] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.907074] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [169.907415] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [169.910696] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.910707] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [169.911340] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected
<6> [169.912248] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [169.913225] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [169.914518] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:106:eDP-1] force updated from 0 to 0 or reprobing
<7> [169.914532] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1]
<7> [169.914545] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1]
<7> [169.915135] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
<7> [169.915483] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
<7> [169.915787] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
<7> [169.916212] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [169.916225] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor
<7> [169.916234] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0
<7> [169.916426] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no
<7> [169.916793] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [169.917214] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no
<7> [169.919251] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes:
<7> [169.919264] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa
<7> [169.919276] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa
<7> [169.919369] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1]
<7> [169.919379] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1]
<7> [169.919823] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
<7> [169.920183] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
<7> [169.920540] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
<7> [169.920952] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [169.920963] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor
<7> [169.920970] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0
<7> [169.921005] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no
<7> [169.921361] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [169.921723] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no
<7> [169.923109] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes:
<7> [169.923120] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa
<7> [169.923131] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa
<7> [169.923436] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:106:eDP-1] EDID override reset
<7> [169.923485] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1]
<7> [169.923495] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1]
<7> [169.923942] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
<7> [169.924305] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
<7> [169.924658] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
<7> [169.925108] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [169.925118] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor
<7> [169.925125] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0
<7> [169.925159] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no
<7> [169.925515] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [169.925934] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no
<7> [169.927305] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes:
<7> [169.927317] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa
<7> [169.927328] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa
<7> [169.927656] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:114:DP-1] EDID override reset
<7> [169.927706] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1]
<7> [169.927717] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]
<7> [169.932296] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected
<7> [169.932637] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:123:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [169.932646] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]
<7> [169.932654] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]
<7> [169.933191] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.933533] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [169.934108] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.934442] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.934453] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [169.934675] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [169.937781] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.937790] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [169.938082] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected
<7> [169.938171] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]
<7> [169.938182] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]
<7> [169.938833] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.939168] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [169.939579] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.939861] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.939870] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [169.940203] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [169.943345] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.943353] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [169.943579] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected
<7> [169.943781] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:123:HDMI-A-1] EDID override reset
<7> [169.943838] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]
<7> [169.943848] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]
<7> [169.944460] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.944789] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [169.945223] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [169.945455] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.945461] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [169.945757] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [169.948930] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [169.948939] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [169.949173] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected
<7> [169.949387] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:129:DP-2] EDID override reset
<7> [169.949421] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2]
<7> [169.949428] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]
<7> [169.953702] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected
<7> [169.954146] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:135:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [169.954158] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]
<7> [169.954168] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]
<7> [169.954790] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [169.955048] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [169.955454] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [169.955739] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [169.955748] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [169.956080] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [169.959268] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [169.959276] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [169.959507] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected
<7> [169.959571] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]
<7> [169.959578] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]
<7> [169.960069] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [169.960393] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [169.960920] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [169.961162] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [169.961169] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [169.961379] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [169.964389] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [169.964398] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [169.964639] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected
<7> [169.964868] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:135:HDMI-A-2] EDID override reset
<7> [169.964901] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]
<7> [169.964908] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]
<7> [169.965371] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [169.965570] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [169.965966] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [169.966255] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [169.966261] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [169.966469] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [169.969479] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [169.969487] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [169.969725] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected
<6> [169.970939] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [169.971602] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [169.994499] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [169.994508] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [169.994594] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1]
<7> [169.994604] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1]
<7> [169.994944] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
<7> [169.995170] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
<7> [169.995371] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
<7> [169.995602] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [169.995609] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor
<7> [169.995614] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0
<7> [169.995637] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no
<7> [169.995874] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [169.996092] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no
<7> [169.997095] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes:
<7> [169.997104] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa
<7> [169.997111] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa
<7> [169.997118] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1]
<7> [169.997125] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]
<7> [170.001428] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected
<7> [170.001439] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]
<7> [170.001446] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]
<7> [170.001941] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [170.002262] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [170.002758] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [170.003076] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [170.003086] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [170.003296] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [170.006307] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [170.006315] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [170.006554] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected
<7> [170.006564] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2]
<7> [170.006571] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]
<7> [170.010857] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected
<7> [170.010868] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]
<7> [170.010875] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]
<7> [170.011361] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [170.011552] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [170.011939] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [170.012242] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [170.012249] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [170.012442] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [170.015446] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [170.015454] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [170.015686] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected
<7> [170.015694] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] enabled? yes
<7> [170.015700] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:114:DP-1] enabled? no
<7> [170.015705] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:123:HDMI-A-1] enabled? no
<7> [170.015710] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:129:DP-2] enabled? no
<7> [170.015714] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:135:HDMI-A-2] enabled? no
<7> [170.015749] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [170.015770] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] found preferred mode: 3200x1800
<7> [170.015776] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config
<7> [170.015829] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:56:pipe A] desired mode 3200x1800 set (0,0)
<7> [170.027851] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [170.044593] Console: switching to colour frame buffer device 200x56
Created at 2025-12-09 06:27:03