Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Duration 0.02 seconds
Igt-Version 
IGT-Version: 2.2-gbbd6b1e51 (x86_64) (Linux: 6.18.0-rc6-next-20251119-next-20251119-gfe4d0dea039f+ x86_64)
Out 
Using IGT_SRANDOM=1763525292 for randomisation
Opened device: /dev/dri/card1
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.023s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.023s)
Dmesg
<6> [241.036504] Console: switching to colour dummy device 80x25
<6> [241.037349] [IGT] kms_force_connector_basic: executing
<7> [241.226342] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [241.227115] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [241.227757] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [241.228573] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:71:VGA-1] force updated from 0 to 0 or reprobing
<7> [241.228585] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1]
<7> [241.228593] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:71:VGA-1] force=1
<7> [241.228877] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [241.229135] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [241.229629] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.229898] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [241.230329] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.230640] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.230647] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.230904] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [241.232242] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.232249] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [241.232557] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [241.232950] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1] disconnected
<7> [241.233020] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1]
<7> [241.233027] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:71:VGA-1] force=1
<7> [241.233295] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [241.233639] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [241.234112] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.234394] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [241.234893] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.235155] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.235160] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.235452] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [241.236811] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.236818] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [241.237073] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [241.237396] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1] disconnected
<7> [241.237526] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1]
<7> [241.237533] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:71:VGA-1] force=1
<7> [241.237801] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [241.238057] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [241.238541] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.238797] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [241.239209] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.239534] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.239543] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.239804] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [241.241096] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.241103] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [241.241383] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [241.241660] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1] disconnected
<6> [241.242565] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [241.243066] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:71:VGA-1] force updated from 0 to 2 or reprobing
<7> [241.243078] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1]
<7> [241.243086] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1] status updated from disconnected to connected
<7> [241.243111] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [241.243203] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [241.243572] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.243928] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [241.244354] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.244737] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.244756] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.245015] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [241.246381] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.246397] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [241.246742] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1] probed modes:
<7> [241.246749] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [241.246756] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [241.246761] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [241.246766] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [241.246771] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [241.246841] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1]
<7> [241.247025] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.247286] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [241.247745] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.248035] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.248051] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.248334] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [241.249733] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.249750] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [241.250102] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1] probed modes:
<7> [241.250109] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [241.250115] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [241.250120] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [241.250125] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [241.250130] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [241.250569] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:71:VGA-1] EDID override set
<7> [241.250624] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1]
<7> [241.250700] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:VGA-1] ELD monitor IGT
<7> [241.250708] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:VGA-1] ELD size 24, SAD count 0
<7> [241.250886] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [241.250897] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [241.250908] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1] probed modes:
<7> [241.250913] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [241.250918] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [241.250923] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [241.250928] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [241.250933] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [241.250938] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [241.251140] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:71:VGA-1] EDID override set
<7> [241.251179] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1]
<7> [241.251223] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:VGA-1] ELD monitor IGT
<7> [241.251229] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:VGA-1] ELD size 24, SAD count 0
<7> [241.251235] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:71:VGA-1] EDID changed, epoch counter 56
<7> [241.251583] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [241.251604] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1] probed modes:
<7> [241.251612] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [241.251621] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [241.251631] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [241.251639] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [241.251646] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [241.251819] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:71:VGA-1] EDID override reset
<7> [241.251857] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1]
<7> [241.252039] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.252364] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [241.252883] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.253146] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.253162] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.253510] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [241.254953] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.254970] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [241.255468] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [241.255486] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [241.255498] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1] probed modes:
<7> [241.255504] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [241.255509] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [241.255514] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [241.255519] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [241.255524] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [241.255831] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:71:VGA-1] force updated from 2 to 0 or reprobing
<7> [241.255840] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1]
<7> [241.255846] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:71:VGA-1] force=1
<7> [241.256125] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [241.256429] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [241.256895] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.257151] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [241.257657] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.257917] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.257923] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.258179] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [241.259543] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.259550] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [241.259807] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [241.260064] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1] status updated from connected to disconnected
<7> [241.260078] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1] disconnected
<7> [241.260091] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [241.260182] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [241.260196] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:71:VGA-1] EDID changed, epoch counter 58
<7> [241.260299] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1]
<7> [241.260359] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:71:VGA-1] force=1
<7> [241.260708] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [241.261085] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [241.261710] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.262104] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [241.262692] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.263089] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.263098] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.263551] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [241.265251] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.265264] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [241.265728] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [241.266167] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1] disconnected
<6> [241.267537] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [241.268789] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [241.269903] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:67:LVDS-1] force updated from 0 to 0 or reprobing
<7> [241.269919] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:67:LVDS-1]
<7> [241.269937] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:67:LVDS-1] ELD monitor
<7> [241.269948] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:67:LVDS-1] ELD size 20, SAD count 0
<7> [241.270075] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:67:LVDS-1] probed modes:
<7> [241.270084] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [241.270147] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:67:LVDS-1]
<7> [241.270160] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:67:LVDS-1] ELD monitor
<7> [241.270169] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:67:LVDS-1] ELD size 20, SAD count 0
<7> [241.270280] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:67:LVDS-1] probed modes:
<7> [241.270288] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [241.270577] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:67:LVDS-1] EDID override reset
<7> [241.270626] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:67:LVDS-1]
<7> [241.270639] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:67:LVDS-1] ELD monitor
<7> [241.270648] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:67:LVDS-1] ELD size 20, SAD count 0
<7> [241.270760] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:67:LVDS-1] probed modes:
<7> [241.270768] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [241.271192] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:71:VGA-1] force updated from 0 to 0 or reprobing
<7> [241.271203] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1]
<7> [241.271213] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:71:VGA-1] force=1
<7> [241.271847] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [241.272231] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [241.272716] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.272998] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [241.273415] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.273675] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.273683] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.273939] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [241.275447] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.275455] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [241.275724] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [241.275983] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1] disconnected
<7> [241.276063] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1]
<7> [241.276071] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:71:VGA-1] force=1
<7> [241.276455] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [241.276778] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [241.277203] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.277535] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [241.277984] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.278239] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.278245] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.278545] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [241.279890] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.279897] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [241.280153] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [241.280448] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1] disconnected
<7> [241.280717] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:71:VGA-1] EDID override reset
<7> [241.280752] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1]
<7> [241.280759] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:71:VGA-1] force=1
<7> [241.281031] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [241.281287] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [241.281759] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.282036] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [241.282449] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.282719] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.282725] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.282980] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [241.284278] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.284285] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [241.284597] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [241.284915] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1] disconnected
<7> [241.285229] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:74:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [241.285238] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:74:HDMI-A-1]
<7> [241.285244] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:74:HDMI-A-1]
<7> [241.336843] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [241.353400] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [241.353413] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.353791] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [241.369394] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [241.369406] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [241.369792] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:74:HDMI-A-1] disconnected
<7> [241.369900] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:74:HDMI-A-1]
<7> [241.369911] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:74:HDMI-A-1]
<7> [241.421923] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [241.438353] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [241.438363] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.438619] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [241.454370] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [241.454378] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [241.454634] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:74:HDMI-A-1] disconnected
<7> [241.454863] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:74:HDMI-A-1] EDID override reset
<7> [241.454898] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:74:HDMI-A-1]
<7> [241.454905] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:74:HDMI-A-1]
<7> [241.506922] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [241.523367] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [241.523379] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.523640] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [241.539366] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [241.539374] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [241.539630] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:74:HDMI-A-1] disconnected
<7> [241.539870] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:82:DP-1] EDID override reset
<7> [241.539903] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:82:DP-1]
<7> [241.539910] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:82:DP-1]
<7> [241.544208] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:82:DP-1] disconnected
<7> [241.544784] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:87:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [241.544798] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:87:HDMI-A-2]
<7> [241.544808] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:87:HDMI-A-2]
<7> [241.545379] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [241.545773] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [241.546337] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [241.546783] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [241.546794] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.547241] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [241.549131] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [241.549141] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [241.549581] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:87:HDMI-A-2] disconnected
<7> [241.549667] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:87:HDMI-A-2]
<7> [241.549678] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:87:HDMI-A-2]
<7> [241.550276] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [241.550742] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [241.551339] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [241.551735] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [241.551746] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.552135] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [241.553891] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [241.553902] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [241.554299] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:87:HDMI-A-2] disconnected
<7> [241.554660] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:87:HDMI-A-2] EDID override reset
<7> [241.554711] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:87:HDMI-A-2]
<7> [241.554721] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:87:HDMI-A-2]
<7> [241.555287] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [241.555685] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [241.556103] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [241.556389] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [241.556398] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.556680] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [241.557986] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [241.557993] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [241.558251] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:87:HDMI-A-2] disconnected
<7> [241.558610] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:91:HDMI-A-3] force updated from 0 to 0 or reprobing
<7> [241.558619] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-3]
<7> [241.558626] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:91:HDMI-A-3]
<7> [241.559055] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [241.559342] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [241.559768] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [241.560026] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [241.560031] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.560282] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [241.561631] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [241.561638] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [241.561897] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-3] disconnected
<7> [241.561959] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-3]
<7> [241.561966] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:91:HDMI-A-3]
<7> [241.562367] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [241.562646] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [241.563059] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [241.563358] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [241.563366] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.563640] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [241.564926] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [241.564933] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [241.565189] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-3] disconnected
<7> [241.565453] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:91:HDMI-A-3] EDID override reset
<7> [241.565489] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-3]
<7> [241.565495] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:91:HDMI-A-3]
<7> [241.565918] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [241.566170] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [241.566631] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [241.566886] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [241.566891] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.567140] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [241.568458] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [241.568465] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [241.568725] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-3] disconnected
<7> [241.568927] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:95:DP-2] EDID override reset
<7> [241.568959] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-2]
<7> [241.568966] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-2]
<7> [241.573263] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-2] disconnected
<7> [241.573504] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:99:DP-3] EDID override reset
<7> [241.573537] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:99:DP-3]
<7> [241.573543] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:99:DP-3]
<7> [241.577838] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:99:DP-3] disconnected
<6> [241.580420] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [241.581035] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [241.598241] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [241.598266] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [241.598509] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:67:LVDS-1]
<7> [241.598530] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:67:LVDS-1] ELD monitor
<7> [241.598553] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:67:LVDS-1] ELD size 20, SAD count 0
<7> [241.598724] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:67:LVDS-1] probed modes:
<7> [241.598735] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [241.598750] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1]
<7> [241.598762] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:71:VGA-1] force=1
<7> [241.599539] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [241.600093] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [241.600954] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.601404] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [241.602014] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.602451] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.602463] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.602863] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [241.604681] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.604693] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [241.605097] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [241.605547] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1] disconnected
<7> [241.605565] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:74:HDMI-A-1]
<7> [241.605576] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:74:HDMI-A-1]
<7> [241.657430] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [241.673369] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [241.673380] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.673664] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [241.689361] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [241.689369] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [241.689646] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:74:HDMI-A-1] disconnected
<7> [241.689657] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:82:DP-1]
<7> [241.689664] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:82:DP-1]
<7> [241.693957] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:82:DP-1] disconnected
<7> [241.693980] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:87:HDMI-A-2]
<7> [241.693992] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:87:HDMI-A-2]
<7> [241.694589] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [241.694922] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [241.695455] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [241.695801] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [241.695810] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.696124] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [241.697606] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [241.697613] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [241.697878] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:87:HDMI-A-2] disconnected
<7> [241.697887] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-3]
<7> [241.697894] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:91:HDMI-A-3]
<7> [241.698331] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [241.698637] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [241.699056] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [241.699364] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [241.699373] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.699647] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [241.700979] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [241.700985] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [241.701244] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-3] disconnected
<7> [241.701252] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-2]
<7> [241.701259] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-2]
<7> [241.705626] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-2] disconnected
<7> [241.705643] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:99:DP-3]
<7> [241.705654] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:99:DP-3]
<7> [241.710170] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:99:DP-3] disconnected
<7> [241.710182] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:67:LVDS-1] enabled? yes
<7> [241.710189] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:71:VGA-1] enabled? no
<7> [241.710194] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:74:HDMI-A-1] enabled? no
<7> [241.710198] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:82:DP-1] enabled? no
<7> [241.710202] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:87:HDMI-A-2] enabled? no
<7> [241.710206] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:91:HDMI-A-3] enabled? no
<7> [241.710210] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:95:DP-2] enabled? no
<7> [241.710214] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:99:DP-3] enabled? no
<7> [241.710246] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [241.710269] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:67:LVDS-1] found preferred mode: 1366x768
<7> [241.710274] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1366x768 config
<7> [241.710300] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:49:pipe A] desired mode 1366x768 set (0,0)
<7> [241.714562] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [241.731600] Console: switching to colour frame buffer device 170x48
Created at 2025-11-19 06:09:15