Results for igt@kms_pm_rpm@basic-rte

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Duration 11.62 seconds
Igt-Version 
IGT-Version: 1.28-g86712f2ef (x86_64) (Linux: 6.9.0-linus-v6.9-ga38297e3fb01+ x86_64)
Out 
Using IGT_SRANDOM=1715548793 for randomisation
Starting subtest: basic-rte
Opened device: /dev/dri/card0
Runtime PM support: 1
PC8 residency support: 0
DMC: fw loaded: yes
i915_runtime_pm_status:
Runtime power status: enabled
GPU idle: yes
IRQs disabled: no
Usage count: 1
PCI device power state: D0 [0]
ref_tracker: 0000:00:02.0@ffff888106de33d8 has 1/1 users at
     track_intel_runtime_pm_wakeref.part.0+0x30/0x60 [i915]
     __intel_display_power_put_async+0x3d/0x160 [i915]
     intel_dp_aux_xfer+0x4ce/0x6d0 [i915]
     intel_dp_aux_transfer+0x1dc/0x2a0 [i915]
     drm_dp_dpcd_access+0x7b/0x140 [drm_display_helper]
     drm_dp_dpcd_read+0xeb/0x100 [drm_display_helper]
     drm_dp_read_sink_count+0x2c/0x80 [drm_display_helper]
     intel_dp_get_dpcd+0x8c/0xb0 [i915]
     intel_dp_detect+0xf1/0x600 [i915]
     drm_helper_probe_detect_ctx+0x45/0x100
     intel_hotplug_detect_connector+0x3e/0x100 [i915]
     i915_hpd_poll_init_work+0x198/0x230 [i915]
     process_scheduled_works+0x354/0x690
     worker_thread+0x13f/0x2e0
     kthread+0xfd/0x130
     ret_from_fork+0x2f/0x50
Subtest basic-rte: SUCCESS (11.615s)
i915_runtime_pm_status:
Runtime power status: enabled
GPU idle: yes
IRQs disabled: no
Usage count: 1
PCI device power state: D0 [0]
ref_tracker: 0000:00:02.0@ffff888106de33d8 has 1/1 users at
     track_intel_runtime_pm_wakeref.part.0+0x30/0x60 [i915]
     __intel_display_power_put_async+0x3d/0x160 [i915]
     __gt_park+0x154/0x210 [i915]
     ____intel_wakeref_put_last+0x20/0x80 [i915]
     intel_gt_pm_debugfs_forcewake_user_release+0x76/0x80 [i915]
     i915_forcewake_release+0x1d/0x40 [i915]
     full_proxy_release+0x3c/0xa0
     __fput+0xa4/0x2d0
     __x64_sys_close+0x38/0x80
     do_syscall_64+0x69/0x140
     entry_SYSCALL_64_after_hwframe+0x76/0x7e
Err 
Starting subtest: basic-rte
Subtest basic-rte: SUCCESS (11.615s)
Dmesg
<6> [85.219030] Console: switching to colour dummy device 80x25
<6> [85.219080] [IGT] kms_pm_rpm: executing
<6> [85.227191] [IGT] kms_pm_rpm: starting subtest basic-rte
<7> [85.227239] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [85.231640] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]
<7> [85.231648] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [85.236739] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected
<7> [85.237171] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]
<7> [85.237177] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [85.238480] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [85.239437] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [85.240353] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected
<7> [85.240849] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]
<7> [85.240855] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [85.241295] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [85.241457] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [85.241860] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [85.242055] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [85.242058] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [85.242174] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [85.246278] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [85.246283] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [85.246412] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected
<7> [85.246742] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]
<7> [85.246748] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [85.251710] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected
<7> [85.251729] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]
<7> [85.251734] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [85.253069] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [85.254342] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [85.255115] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected
<7> [85.255133] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]
<7> [85.255138] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [85.255550] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [85.255694] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [85.256108] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [85.256263] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [85.256267] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [85.256416] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [85.260893] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [85.260898] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [85.261027] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected
<7> [85.261055] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]
<7> [85.261060] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [85.265746] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected
<7> [85.265804] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]
<7> [85.265809] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [85.267188] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [85.268156] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [85.268929] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected
<7> [85.268990] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]
<7> [85.268995] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [85.269450] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [85.269616] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [85.270037] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [85.270194] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [85.270197] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [85.270312] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [85.274546] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [85.274550] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [85.274700] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected
<7> [85.465901] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [85.466457] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [85.466985] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [85.467445] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [85.468396] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.321334] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [96.328784] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [96.353972] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [96.362788] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [96.363104] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.363551] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [96.364432] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]
<7> [96.368810] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [96.370139] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [96.370755] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [96.371367] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [96.373191] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [96.374409] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [96.375371] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [96.375811] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [96.375970] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [96.376361] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [96.376512] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [96.376516] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [96.376651] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [96.380700] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [96.380705] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [96.380990] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]
<7> [96.381101] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]
<7> [96.481836] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [96.499927] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [96.500488] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [96.501064] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [96.502066] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.502636] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [96.509737] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [96.582431] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]
<7> [96.594765] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [96.603510] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [96.604455] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.604980] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [96.605745] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [96.606713] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [96.606982] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]
<7> [96.611736] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [96.612170] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [96.613695] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [96.614973] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [96.615918] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [96.616335] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [96.616483] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [96.616845] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [96.617018] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [96.617022] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [96.617139] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [96.621526] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [96.621531] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [96.621829] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]
<7> [96.729820] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [96.730053] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [96.730244] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [96.730426] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [96.731084] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [96.731337] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [96.735526] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [96.834612] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [96.839532] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [96.839746] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [96.840005] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [96.840577] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [96.841211] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<6> [96.842368] [IGT] kms_pm_rpm: finished subtest basic-rte, SUCCESS
<7> [96.842482] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]
<7> [96.845744] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [96.846001] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [96.847405] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [96.848722] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [96.849536] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [96.850049] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [96.850168] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [96.850630] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [96.850823] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [96.850827] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [96.850973] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [96.855388] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [96.855392] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [96.855768] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]
<7> [96.855876] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]
<7> [97.049899] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [97.050459] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [97.050972] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [97.051499] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [97.052428] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [97.053144] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [97.060705] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [97.169889] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [97.177860] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [97.178390] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [97.178824] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [97.179841] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [97.181437] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<6> [97.182079] [IGT] kms_pm_rpm: exiting, ret=0
<7> [97.186763] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [97.187146] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [97.188603] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [97.189727] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [97.190792] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [97.191321] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [97.191495] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [97.191975] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [97.192207] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [97.192213] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [97.192421] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [97.197122] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [97.197125] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<6> [97.197473] Console: switching to colour frame buffer device 128x48
Created at 2024-05-12 22:37:22