igt@i915_pm_rpm@module-reload on fi-kbl-x1275@linus-v6.9 Test details

Detail	Value
Duration	26.18 seconds
Igt-Version	IGT-Version: 1.28-g86712f2ef (x86_64) (Linux: 6.9.0-linus-v6.9-ga38297e3fb01+ x86_64)
Out	Using IGT_SRANDOM=1715548842 for randomisation Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: 0000:00:02.0@ffff888111cc33d8 has 1/1 users at track_intel_runtime_pm_wakeref.part.0+0x30/0x60 [i915] __intel_display_power_put_async+0x3d/0x160 [i915] intel_atomic_commit_tail+0xb0b/0xfa0 [i915] intel_atomic_commit+0x330/0x380 [i915] drm_atomic_commit+0x9d/0xd0 drm_atomic_helper_set_config+0x77/0xc0 drm_mode_setcrtc+0x1f7/0x740 drm_ioctl_kernel+0xab/0x100 drm_ioctl+0x222/0x430 __x64_sys_ioctl+0x7c/0xb0 do_syscall_64+0x69/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e Starting subtest: module-reload Reloading i915 with disable_display=1 mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: 0000:00:02.0@ffff8881052033d8 has 1/1 users at track_intel_runtime_pm_wakeref.part.0+0x30/0x60 [i915] intel_display_power_get+0x24/0x70 [i915] i915_hpd_poll_init_work+0x149/0x230 [i915] process_scheduled_works+0x354/0x690 worker_thread+0x13f/0x2e0 kthread+0xfd/0x130 ret_from_fork+0x2f/0x50 ret_from_fork_asm+0x1a/0x30 Reloading i915 with mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: 0000:00:02.0@ffff8881670433d8 has 1/1 users at track_intel_runtime_pm_wakeref.part.0+0x30/0x60 [i915] __intel_display_power_put_async+0x3d/0x160 [i915] intel_atomic_commit_tail+0xb0b/0xfa0 [i915] intel_atomic_commit+0x330/0x380 [i915] drm_atomic_commit+0x9d/0xd0 drm_atomic_helper_set_config+0x77/0xc0 drm_mode_setcrtc+0x1f7/0x740 drm_ioctl_kernel+0xab/0x100 drm_ioctl+0x222/0x430 __x64_sys_ioctl+0x7c/0xb0 do_syscall_64+0x69/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e Subtest module-reload: SUCCESS (26.175s)
Err	Starting subtest: module-reload Subtest module-reload: SUCCESS (26.175s)
Dmesg	<6> [134.763935] [IGT] i915_pm_rpm: executing <7> [134.769420] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [134.769845] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [134.769853] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [134.774693] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [134.774758] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [134.774763] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [134.775039] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [134.776528] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [134.777732] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [134.778495] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [134.778555] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [134.778561] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [134.779257] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [134.779380] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [134.780158] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [134.780311] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [134.780316] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [134.780431] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [134.784533] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [134.784537] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [134.784663] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [134.788223] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [134.788230] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [134.792753] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [134.793170] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [134.793176] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [134.794455] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [134.795650] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [134.796292] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [134.796739] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [134.796745] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [134.797169] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [134.797330] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [134.797706] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [134.797898] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [134.797901] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [134.798017] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [134.802159] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [134.802162] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [134.802289] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [134.802594] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [134.802599] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [134.807691] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [134.807709] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [134.807713] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [134.809049] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [134.810268] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [134.811316] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [134.811335] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [134.811340] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [134.811823] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [134.811952] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [134.812337] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [134.812495] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [134.812500] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [134.812632] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [134.816726] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [134.816731] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [134.816859] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [134.913860] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [134.914232] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [134.914543] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [134.914879] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [134.915652] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.865773] [drm:drm_mode_setcrtc] [CRTC:51:pipe A] <7> [145.866718] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.867280] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [145.868384] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [145.869375] [drm:drm_mode_setcrtc] [CRTC:72:pipe B] <7> [145.869496] [drm:drm_mode_setcrtc] [CRTC:93:pipe C] <7> [145.886815] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [145.887014] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [145.887180] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [145.887817] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.888451] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [145.892790] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [145.970907] [IGT] i915_pm_rpm: starting subtest module-reload <7> [146.112843] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [146.118256] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [146.118567] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.119065] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [146.119780] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [146.120427] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [146.121003] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [146.121394] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [146.121805] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [146.122193] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [146.122654] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [146.127717] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [146.129327] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [146.130607] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [146.131567] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [146.132000] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [146.132125] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [146.132496] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [146.132657] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [146.132663] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [146.132798] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [146.137102] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [146.137106] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [146.159828] i915 0000:00:02.0: [drm] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [146.220250] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <6> [146.571300] [IGT] Reloading i915 w/o display <7> [146.745176] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [146.745387] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [146.745547] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH <7> [146.745737] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [146.745944] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [146.746085] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz <7> [146.746642] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [146.746770] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [146.746926] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M <6> [146.747036] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [146.747039] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [146.747255] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [146.747270] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047 <7> [146.747409] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K <7> [146.747545] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7496 MiB [mem 0x00000000-0x1d4874fff], io: n/a <7> [146.747650] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 31 MiB [mem 0x8a800000-0x8c6fffff], io: n/a <7> [146.747976] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018 <7> [146.748148] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [146.748294] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [146.748439] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [146.748583] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [146.752740] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [146.752919] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [146.753092] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [146.753248] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [146.753419] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [146.753572] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [146.753711] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [146.753858] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [146.753971] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [146.754083] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [146.754194] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [146.754305] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [146.754416] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [146.754526] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [146.755279] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [146.755450] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196 <7> [146.755621] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [146.755852] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [146.756038] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [146.756225] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [146.756431] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812) <7> [146.756603] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34) <7> [146.756815] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [146.757003] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [146.757171] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [146.757338] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [146.757502] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [146.757666] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [146.757871] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6 <7> [146.758082] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [146.758249] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [146.758415] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [146.758580] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [146.758750] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [146.758948] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [146.759113] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3 <7> [146.759276] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [146.759440] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3 <7> [146.759604] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [146.759803] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [146.760021] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [146.760207] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [146.760443] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [146.761049] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [146.761218] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [146.761398] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [146.761604] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.761777] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [146.761985] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [146.762159] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [146.762357] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [146.762524] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [146.762723] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [146.762906] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [146.763105] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <7> [146.763590] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [146.764148] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [146.764301] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [146.764491] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [146.764637] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [146.765300] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [146.765462] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [146.765615] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [146.765720] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [146.765798] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [146.765943] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [146.766090] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [146.766236] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <6> [146.766309] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [146.766382] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [146.766527] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [146.768070] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [146.769551] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [146.769859] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] Using AUX CH A (VBT) <7> [146.770094] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A] <7> [146.772684] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [146.772880] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [146.773063] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [146.773217] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static <7> [146.773377] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [146.773532] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [146.773717] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [146.773910] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [146.774064] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [146.774219] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0 <7> [146.774375] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1 <7> [146.774576] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0 <7> [146.774836] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [146.774981] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [146.775120] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [146.775258] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [146.775396] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [146.775606] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [146.776027] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on <7> [146.776236] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [146.776458] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [146.776615] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [146.776867] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [146.777035] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [146.996680] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [147.007681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [147.018687] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [147.029681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [147.040681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [147.051681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [147.062682] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [147.073681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [147.084681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [147.095681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [147.106682] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [147.117681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [147.128680] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [147.139681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [147.150682] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [147.161680] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [147.172681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [147.183680] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [147.194682] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [147.205680] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [147.216681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [147.227681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [147.238682] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [147.249680] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [147.260682] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [147.271680] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [147.282682] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [147.293681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [147.304681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [147.315680] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [147.326682] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [147.337681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [147.337899] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <6> [147.337913] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP <7> [147.337946] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off <7> [147.338155] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [147.338394] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] Using AUX CH B (VBT) <7> [147.338558] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B] <7> [147.498702] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX B/DDI B/PHY B: Too many retries, giving up. First error: -6 <7> [147.498723] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [147.498972] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DDI C/PHY C] Using AUX CH C (VBT) <7> [147.499213] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C] <7> [147.500543] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [147.500798] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C] <7> [147.501015] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:106:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [147.501576] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [147.501947] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [147.502272] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [147.502523] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [147.502804] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [147.503061] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [147.503309] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [147.503558] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [147.503838] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [147.504094] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [147.504341] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [147.504587] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [147.504866] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [147.505100] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A <7> [147.505326] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B <7> [147.505552] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C <7> [147.505830] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A <7> [147.506062] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A <7> [147.506287] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B <7> [147.506511] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C <7> [147.506791] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [147.507055] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [147.507317] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [147.507619] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [147.507964] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled <7> [147.508158] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled <7> [147.508349] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled <7> [147.508510] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [147.508683] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [147.508857] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [147.509017] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [147.509185] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [147.509346] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [147.509505] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [147.509664] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [147.509843] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [147.510021] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [147.510181] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [147.510341] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [147.510561] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [147.510747] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [147.510927] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [147.511093] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [147.511261] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [147.511454] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [147.511614] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [147.511840] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [147.511958] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [147.512083] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [147.512226] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 6 GT workarounds on global <7> [147.513227] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [147.513372] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [147.513512] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 14 context workarounds on rcs'0 <7> [147.524633] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [147.524791] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [147.524914] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [147.525033] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [147.525313] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [147.525521] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [147.525687] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [147.525880] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [147.526034] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [147.526277] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [147.530003] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [147.531146] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event <7> [147.531705] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [147.532599] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event <7> [147.532981] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event <6> [147.533037] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0 <7> [147.534441] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected <6> [147.550964] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [147.554203] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 <7> [147.555233] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [147.556229] [drm:drm_client_modeset_probe] <7> [147.556272] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [147.556282] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [147.556531] i915 0000:00:02.0: [drm] i915 display info: display version: 9 <7> [147.556537] i915 0000:00:02.0: [drm] i915 display info: cursor_needs_physical: no <7> [147.556541] i915 0000:00:02.0: [drm] i915 display info: has_cdclk_crawl: no <7> [147.556544] i915 0000:00:02.0: [drm] i915 display info: has_cdclk_squash: no <7> [147.556546] i915 0000:00:02.0: [drm] i915 display info: has_ddi: yes <7> [147.556549] i915 0000:00:02.0: [drm] i915 display info: has_dp_mst: yes <7> [147.556553] i915 0000:00:02.0: [drm] i915 display info: has_dsb: no <7> [147.556555] i915 0000:00:02.0: [drm] i915 display info: has_fpga_dbg: yes <7> [147.556555] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] status updated from unknown to disconnected <7> [147.556558] i915 0000:00:02.0: [drm] i915 display info: has_gmch: no <7> [147.556560] i915 0000:00:02.0: [drm] i915 display info: has_hotplug: yes <7> [147.556563] i915 0000:00:02.0: [drm] i915 display info: has_hti: no <7> [147.556565] i915 0000:00:02.0: [drm] i915 display info: has_ipc: yes <7> [147.556568] i915 0000:00:02.0: [drm] i915 display info: has_overlay: no <7> [147.556571] i915 0000:00:02.0: [drm] i915 display info: has_psr: yes <7> [147.556572] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [147.556574] i915 0000:00:02.0: [drm] i915 display info: has_psr_hw_tracking: yes <7> [147.556577] i915 0000:00:02.0: [drm] i915 display info: overlay_needs_physical: no <7> [147.556580] i915 0000:00:02.0: [drm] i915 display info: supports_tv: no <7> [147.556582] i915 0000:00:02.0: [drm] i915 display info: has_hdcp: yes <7> [147.556584] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [147.556585] i915 0000:00:02.0: [drm] i915 display info: has_dmc: yes <7> [147.556588] i915 0000:00:02.0: [drm] i915 display info: has_dsc: no <7> [147.556592] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [147.556593] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [147.556846] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] status updated from unknown to disconnected <7> [147.556859] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [147.556866] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [147.556862] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [147.556874] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [147.557101] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected <7> [147.557112] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [147.557119] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [147.557124] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [147.557130] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [147.557134] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [147.557176] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [147.557189] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [147.557210] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [147.557221] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [147.557113] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [147.557343] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [147.558159] [drm:drm_client_modeset_probe] <7> [147.558088] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [147.558298] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [147.558469] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [147.558638] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [147.558646] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [147.558834] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [147.558842] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [147.558850] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [147.558841] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [147.559006] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [147.559010] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [147.559021] i915 0000:00:02.0: [drm] device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9 <7> [147.559025] i915 0000:00:02.0: [drm] device info: graphics version: 9 <7> [147.559027] i915 0000:00:02.0: [drm] device info: media version: 9 <7> [147.559029] i915 0000:00:02.0: [drm] device info: graphics stepping: F0 <7> [147.559031] i915 0000:00:02.0: [drm] device info: media stepping: F0 <7> [147.559033] i915 0000:00:02.0: [drm] device info: display stepping: C0 <7> [147.559034] i915 0000:00:02.0: [drm] device info: base die stepping: <7> [147.559036] i915 0000:00:02.0: [drm] device info: gt: 2 <7> [147.559039] i915 0000:00:02.0: [drm] device info: memory-regions: 0x21 <7> [147.559042] i915 0000:00:02.0: [drm] device info: page-sizes: 0x11000 <7> [147.559045] i915 0000:00:02.0: [drm] device info: platform: KABYLAKE <7> [147.559047] i915 0000:00:02.0: [drm] device info: ppgtt-size: 48 <7> [147.559050] i915 0000:00:02.0: [drm] device info: ppgtt-type: 2 <7> [147.559053] i915 0000:00:02.0: [drm] device info: dma_mask_size: 39 <7> [147.559056] i915 0000:00:02.0: [drm] device info: is_mobile: no <7> [147.559059] i915 0000:00:02.0: [drm] device info: is_lp: no <7> [147.559061] i915 0000:00:02.0: [drm] device info: require_force_probe: no <7> [147.559064] i915 0000:00:02.0: [drm] device info: is_dgfx: no <7> [147.559067] i915 0000:00:02.0: [drm] device info: has_64bit_reloc: yes <7> [147.559069] i915 0000:00:02.0: [drm] device info: has_64k_pages: no <7> [147.559072] i915 0000:00:02.0: [drm] device info: gpu_reset_clobbers_display: no <7> [147.559075] i915 0000:00:02.0: [drm] device info: has_reset_engine: yes <7> [147.559078] i915 0000:00:02.0: [drm] device info: has_3d_pipeline: yes <7> [147.559081] i915 0000:00:02.0: [drm] device info: has_flat_ccs: no <7> [147.559084] i915 0000:00:02.0: [drm] device info: has_global_mocs: no <7> [147.559087] i915 0000:00:02.0: [drm] device info: has_gmd_id: no <7> [147.559090] i915 0000:00:02.0: [drm] device info: has_gt_uc: yes <7> [147.559018] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [147.559093] i915 0000:00:02.0: [drm] device info: has_heci_pxp: no <7> [147.559095] i915 0000:00:02.0: [drm] device info: has_heci_gscfi: no <7> [147.559098] i915 0000:00:02.0: [drm] device info: has_guc_deprivilege: no <7> [147.559101] i915 0000:00:02.0: [drm] device info: has_guc_tlb_invalidation: no <7> [147.559103] i915 0000:00:02.0: [drm] device info: has_l3_ccs_read: no <7> [147.559105] i915 0000:00:02.0: [drm] device info: has_l3_dpf: no <7> [147.559108] i915 0000:00:02.0: [drm] device info: has_llc: yes <7> [147.559110] i915 0000:00:02.0: [drm] device info: has_logical_ring_contexts: yes <7> [147.559113] i915 0000:00:02.0: [drm] device info: has_logical_ring_elsq: no <7> [147.559115] i915 0000:00:02.0: [drm] device info: has_media_ratio_mode: no <7> [147.559118] i915 0000:00:02.0: [drm] device info: has_mslice_steering: no <7> [147.559120] i915 0000:00:02.0: [drm] device info: has_oa_bpc_reporting: no <7> [147.559123] i915 0000:00:02.0: [drm] device info: has_oa_slice_contrib_limits: no <7> [147.559125] i915 0000:00:02.0: [drm] device info: has_oam: no <7> [147.559127] i915 0000:00:02.0: [drm] device info: has_one_eu_per_fuse_bit: no <7> [147.559129] i915 0000:00:02.0: [drm] device info: has_pxp: no <7> [147.559132] i915 0000:00:02.0: [drm] device info: has_rc6: yes <7> [147.559134] i915 0000:00:02.0: [drm] device info: has_rc6p: no <7> [147.559136] i915 0000:00:02.0: [drm] device info: has_rps: yes <7> [147.559139] i915 0000:00:02.0: [drm] device info: has_runtime_pm: yes <7> [147.559142] i915 0000:00:02.0: [drm] device info: has_snoop: no <7> [147.559144] i915 0000:00:02.0: [drm] device info: has_coherent_ggtt: yes <7> [147.559147] i915 0000:00:02.0: [drm] device info: tuning_thread_rr_after_dep: no <7> [147.559149] i915 0000:00:02.0: [drm] device info: unfenced_needs_alignment: no <7> [147.559152] i915 0000:00:02.0: [drm] device info: hws_needs_physical: no <7> [147.559154] i915 0000:00:02.0: [drm] device info: has_pooled_eu: no <7> [147.559156] i915 0000:00:02.0: [drm] device info: rawclk rate: 24000 kHz <7> [147.559159] i915 0000:00:02.0: [drm] device info: iommu: enabled <7> [147.559162] i915 0000:00:02.0: [drm] device info: available engines: 40403 <7> [147.559165] i915 0000:00:02.0: [drm] device info: slice total: 1, mask=0001 <7> [147.559168] i915 0000:00:02.0: [drm] device info: subslice total: 3 <7> [147.559169] i915 0000:00:02.0: [drm] device info: slice0: 3 subslices, mask=00000007 <7> [147.559171] i915 0000:00:02.0: [drm] device info: slice1: 0 subslices, mask=00000000 <7> [147.559173] i915 0000:00:02.0: [drm] device info: slice2: 0 subslices, mask=00000000 <7> [147.559174] i915 0000:00:02.0: [drm] device info: EU total: 24 <7> [147.559176] i915 0000:00:02.0: [drm] device info: EU per subslice: 8 <7> [147.559177] i915 0000:00:02.0: [drm] device info: has slice power gating: no <7> [147.559179] i915 0000:00:02.0: [drm] device info: has subslice power gating: no <7> [147.559180] i915 0000:00:02.0: [drm] device info: has EU power gating: yes <6> [147.559182] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [147.559183] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [147.559184] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [147.559215] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [147.559223] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [147.559228] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [147.559233] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [147.559238] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [147.559270] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [147.559282] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [147.559301] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [147.559311] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [147.563056] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [147.706442] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [147.707543] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [147.708099] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [147.708726] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [147.709748] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [158.613261] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [158.622822] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [158.647487] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [158.653317] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [158.653892] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [158.654124] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [158.654342] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [158.654544] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [158.654723] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [158.655026] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [158.660871] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [158.847842] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [158.857892] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [158.858730] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [158.859131] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [158.859946] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [158.860848] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [158.861379] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [158.861764] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [158.862128] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [158.862490] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [158.862897] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [158.863298] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [158.863627] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [158.893829] i915 0000:00:02.0: [drm] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [158.947114] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <6> [159.252411] [IGT] Reloading i915 as normal <7> [159.406076] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [159.406302] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [159.406472] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH <7> [159.406623] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [159.406906] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [159.407064] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz <7> [159.407648] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [159.407829] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [159.407987] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M <6> [159.408108] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [159.408112] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [159.408331] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [159.408346] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047 <7> [159.408495] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K <7> [159.408642] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7496 MiB [mem 0x00000000-0x1d4874fff], io: n/a <7> [159.408775] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 31 MiB [mem 0x8a800000-0x8c6fffff], io: n/a <7> [159.409120] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018 <7> [159.409302] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [159.409458] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [159.409612] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [159.409778] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [159.413710] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [159.413876] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [159.414032] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [159.414188] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [159.414343] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [159.414463] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [159.414576] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [159.414734] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [159.414864] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [159.414975] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [159.415087] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [159.415197] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [159.415307] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [159.415417] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [159.416031] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [159.416192] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196 <7> [159.416351] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [159.416509] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [159.416667] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [159.416841] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [159.417078] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812) <7> [159.417235] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34) <7> [159.417392] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [159.417550] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [159.417717] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [159.417874] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [159.418030] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [159.418183] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [159.418336] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6 <7> [159.418491] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [159.418648] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [159.418810] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [159.419040] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [159.419193] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [159.419346] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [159.419498] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3 <7> [159.419650] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [159.419812] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3 <7> [159.420042] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [159.420206] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [159.420394] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [159.420563] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [159.420746] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [159.421317] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [159.421475] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [159.421643] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [159.421871] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [159.422076] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [159.422230] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [159.422395] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [159.422580] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [159.422743] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [159.422941] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [159.423095] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [159.423282] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <7> [159.423901] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [159.424063] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [159.424216] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [159.424369] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <6> [159.424904] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [159.424905] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [159.425404] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [159.425558] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [159.425744] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [159.425933] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [159.426080] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [159.426226] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [159.426371] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [159.426516] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [159.426731] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [159.426914] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [159.428045] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [159.429026] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [159.429214] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] Using AUX CH A (VBT) <7> [159.429380] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A] <7> [159.431705] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [159.431877] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [159.432077] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [159.432258] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static <7> [159.432419] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [159.432574] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [159.432783] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [159.432974] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [159.433128] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [159.433281] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0 <7> [159.433435] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1 <7> [159.433666] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0 <7> [159.433951] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [159.434109] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [159.434248] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [159.434387] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [159.434526] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [159.434828] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [159.435179] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on <7> [159.435413] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [159.435644] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [159.435860] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [159.436094] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [159.436254] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [159.652685] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.663681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.674684] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.685681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.696682] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.707681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.718682] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.729682] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.740682] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.751681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.762684] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.773680] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.784681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.795682] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.806681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.817681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.828683] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.839680] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.850681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.861683] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.872681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.883681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.894683] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.905680] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.916681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.927683] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.938681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.949680] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.960684] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.971683] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.982681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.993681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.993903] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <6> [159.993919] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP <7> [159.993953] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off <7> [159.994159] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [159.994441] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] Using AUX CH B (VBT) <7> [159.994605] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B] <7> [160.154742] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX B/DDI B/PHY B: Too many retries, giving up. First error: -6 <7> [160.154764] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [160.155019] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DDI C/PHY C] Using AUX CH C (VBT) <7> [160.155268] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C] <7> [160.156748] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [160.156995] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C] <7> [160.157226] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:106:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [160.157883] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [160.158222] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [160.158556] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [160.158831] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [160.159088] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [160.159439] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [160.159813] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [160.160098] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [160.160358] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [160.160617] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [160.160888] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [160.161146] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [160.161406] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [160.161698] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A <7> [160.161934] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B <7> [160.162170] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C <7> [160.162429] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A <7> [160.162664] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A <7> [160.162921] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B <7> [160.163266] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C <7> [160.163644] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [160.163940] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [160.164201] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [160.164382] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [160.164607] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled <7> [160.164810] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled <7> [160.165002] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled <7> [160.165164] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [160.165324] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [160.165489] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [160.165679] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [160.165850] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [160.166013] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [160.166175] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [160.166335] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [160.166503] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [160.166666] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [160.166862] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [160.167093] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [160.167425] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [160.167619] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [160.167798] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [160.168009] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [160.168165] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [160.168314] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [160.168461] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [160.168640] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [160.168768] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [160.168937] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [160.169080] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 6 GT workarounds on global <7> [160.170154] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [160.170299] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [160.170439] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 14 context workarounds on rcs'0 <7> [160.182298] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [160.182440] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [160.182562] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [160.182721] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [160.183089] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [160.183357] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [160.183506] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [160.183651] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [160.183839] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [160.184035] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [160.186943] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [160.187568] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event <7> [160.187895] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [160.188482] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event <7> [160.188796] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event <6> [160.188849] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0 <7> [160.190309] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected <6> [160.202629] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [160.204519] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8 <7> [160.205083] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [160.206176] [drm:drm_client_modeset_probe] <7> [160.206223] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [160.206233] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [160.206565] i915 0000:00:02.0: [drm] i915 display info: display version: 9 <7> [160.206570] i915 0000:00:02.0: [drm] i915 display info: cursor_needs_physical: no <7> [160.206574] i915 0000:00:02.0: [drm] i915 display info: has_cdclk_crawl: no <7> [160.206576] i915 0000:00:02.0: [drm] i915 display info: has_cdclk_squash: no <7> [160.206580] i915 0000:00:02.0: [drm] i915 display info: has_ddi: yes <7> [160.206583] i915 0000:00:02.0: [drm] i915 display info: has_dp_mst: yes <7> [160.206586] i915 0000:00:02.0: [drm] i915 display info: has_dsb: no <7> [160.206589] i915 0000:00:02.0: [drm] i915 display info: has_fpga_dbg: yes <7> [160.206591] i915 0000:00:02.0: [drm] i915 display info: has_gmch: no <7> [160.206594] i915 0000:00:02.0: [drm] i915 display info: has_hotplug: yes <7> [160.206597] i915 0000:00:02.0: [drm] i915 display info: has_hti: no <7> [160.206600] i915 0000:00:02.0: [drm] i915 display info: has_ipc: yes <7> [160.206603] i915 0000:00:02.0: [drm] i915 display info: has_overlay: no <7> [160.206606] i915 0000:00:02.0: [drm] i915 display info: has_psr: yes <7> [160.206609] i915 0000:00:02.0: [drm] i915 display info: has_psr_hw_tracking: yes <7> [160.206612] i915 0000:00:02.0: [drm] i915 display info: overlay_needs_physical: no <7> [160.206615] i915 0000:00:02.0: [drm] i915 display info: supports_tv: no <7> [160.206618] i915 0000:00:02.0: [drm] i915 display info: has_hdcp: yes <7> [160.206621] i915 0000:00:02.0: [drm] i915 display info: has_dmc: yes <7> [160.206624] i915 0000:00:02.0: [drm] i915 display info: has_dsc: no <7> [160.206628] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [160.207006] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [160.207241] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [160.207473] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [160.208173] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [160.208361] i915 0000:00:02.0: [drm] device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9 <7> [160.208365] i915 0000:00:02.0: [drm] device info: graphics version: 9 <7> [160.208367] i915 0000:00:02.0: [drm] device info: media version: 9 <7> [160.208369] i915 0000:00:02.0: [drm] device info: graphics stepping: F0 <7> [160.208371] i915 0000:00:02.0: [drm] device info: media stepping: F0 <7> [160.208372] i915 0000:00:02.0: [drm] device info: display stepping: C0 <7> [160.208374] i915 0000:00:02.0: [drm] device info: base die stepping: <7> [160.208376] i915 0000:00:02.0: [drm] device info: gt: 2 <7> [160.208377] i915 0000:00:02.0: [drm] device info: memory-regions: 0x21 <7> [160.208379] i915 0000:00:02.0: [drm] device info: page-sizes: 0x11000 <7> [160.208381] i915 0000:00:02.0: [drm] device info: platform: KABYLAKE <7> [160.208382] i915 0000:00:02.0: [drm] device info: ppgtt-size: 48 <7> [160.208384] i915 0000:00:02.0: [drm] device info: ppgtt-type: 2 <7> [160.208386] i915 0000:00:02.0: [drm] device info: dma_mask_size: 39 <7> [160.208388] i915 0000:00:02.0: [drm] device info: is_mobile: no <7> [160.208389] i915 0000:00:02.0: [drm] device info: is_lp: no <7> [160.208391] i915 0000:00:02.0: [drm] device info: require_force_probe: no <7> [160.208393] i915 0000:00:02.0: [drm] device info: is_dgfx: no <7> [160.208394] i915 0000:00:02.0: [drm] device info: has_64bit_reloc: yes <7> [160.208396] i915 0000:00:02.0: [drm] device info: has_64k_pages: no <7> [160.208398] i915 0000:00:02.0: [drm] device info: gpu_reset_clobbers_display: no <7> [160.208399] i915 0000:00:02.0: [drm] device info: has_reset_engine: yes <7> [160.208401] i915 0000:00:02.0: [drm] device info: has_3d_pipeline: yes <7> [160.208403] i915 0000:00:02.0: [drm] device info: has_flat_ccs: no <7> [160.208404] i915 0000:00:02.0: [drm] device info: has_global_mocs: no <7> [160.208406] i915 0000:00:02.0: [drm] device info: has_gmd_id: no <7> [160.208407] i915 0000:00:02.0: [drm] device info: has_gt_uc: yes <7> [160.208409] i915 0000:00:02.0: [drm] device info: has_heci_pxp: no <7> [160.208411] i915 0000:00:02.0: [drm] device info: has_heci_gscfi: no <7> [160.208412] i915 0000:00:02.0: [drm] device info: has_guc_deprivilege: no <7> [160.208414] i915 0000:00:02.0: [drm] device info: has_guc_tlb_invalidation: no <7> [160.208416] i915 0000:00:02.0: [drm] device info: has_l3_ccs_read: no <7> [160.208417] i915 0000:00:02.0: [drm] device info: has_l3_dpf: no <7> [160.208419] i915 0000:00:02.0: [drm] device info: has_llc: yes <7> [160.208420] i915 0000:00:02.0: [drm] device info: has_logical_ring_contexts: yes <7> [160.208422] i915 0000:00:02.0: [drm] device info: has_logical_ring_elsq: no <7> [160.208424] i915 0000:00:02.0: [drm] device info: has_media_ratio_mode: no <7> [160.208425] i915 0000:00:02.0: [drm] device info: has_mslice_steering: no <7> [160.208427] i915 0000:00:02.0: [drm] device info: has_oa_bpc_reporting: no <7> [160.208428] i915 0000:00:02.0: [drm] device info: has_oa_slice_contrib_limits: no <7> [160.208430] i915 0000:00:02.0: [drm] device info: has_oam: no <7> [160.208432] i915 0000:00:02.0: [drm] device info: has_one_eu_per_fuse_bit: no <7> [160.208433] i915 0000:00:02.0: [drm] device info: has_pxp: no <7> [160.208435] i915 0000:00:02.0: [drm] device info: has_rc6: yes <7> [160.208437] i915 0000:00:02.0: [drm] device info: has_rc6p: no <7> [160.208438] i915 0000:00:02.0: [drm] device info: has_rps: yes <7> [160.208440] i915 0000:00:02.0: [drm] device info: has_runtime_pm: yes <7> [160.208441] i915 0000:00:02.0: [drm] device info: has_snoop: no <7> [160.208443] i915 0000:00:02.0: [drm] device info: has_coherent_ggtt: yes <7> [160.208445] i915 0000:00:02.0: [drm] device info: tuning_thread_rr_after_dep: no <7> [160.208446] i915 0000:00:02.0: [drm] device info: unfenced_needs_alignment: no <7> [160.208448] i915 0000:00:02.0: [drm] device info: hws_needs_physical: no <7> [160.208449] i915 0000:00:02.0: [drm] device info: has_pooled_eu: no <7> [160.208451] i915 0000:00:02.0: [drm] device info: rawclk rate: 24000 kHz <7> [160.208453] i915 0000:00:02.0: [drm] device info: iommu: enabled <7> [160.208455] i915 0000:00:02.0: [drm] device info: available engines: 40403 <7> [160.208457] i915 0000:00:02.0: [drm] device info: slice total: 1, mask=0001 <7> [160.208459] i915 0000:00:02.0: [drm] device info: subslice total: 3 <7> [160.208461] i915 0000:00:02.0: [drm] device info: slice0: 3 subslices, mask=00000007 <7> [160.208463] i915 0000:00:02.0: [drm] device info: slice1: 0 subslices, mask=00000000 <7> [160.208465] i915 0000:00:02.0: [drm] device info: slice2: 0 subslices, mask=00000000 <7> [160.208466] i915 0000:00:02.0: [drm] device info: EU total: 24 <7> [160.208468] i915 0000:00:02.0: [drm] device info: EU per subslice: 8 <7> [160.208470] i915 0000:00:02.0: [drm] device info: has slice power gating: no <7> [160.208471] i915 0000:00:02.0: [drm] device info: has subslice power gating: no <7> [160.208473] i915 0000:00:02.0: [drm] device info: has EU power gating: yes <6> [160.208475] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [160.208476] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [160.208478] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [160.210775] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] status updated from unknown to disconnected <7> [160.210794] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [160.210803] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [160.210811] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [160.212767] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [160.213717] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [160.214651] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] status updated from unknown to disconnected <7> [160.214666] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [160.214690] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [160.214698] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [160.215697] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [160.215929] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [160.216442] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [160.216727] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [160.216735] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [160.216952] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [160.221405] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [160.221412] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [160.221654] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected <7> [160.221689] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [160.221697] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [160.221704] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [160.221709] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [160.221714] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [160.221755] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [160.221768] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [160.221795] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [160.221806] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [160.221927] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [160.226771] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [160.228345] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [160.229642] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [160.230679] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [160.231365] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [160.231516] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [160.231934] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [160.232117] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [160.232122] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [160.232270] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [160.236685] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [160.236696] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [160.237412] [drm:drm_client_modeset_probe] <7> [160.237440] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [160.237448] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [160.240657] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [160.241719] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [160.241729] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [160.241735] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [160.243233] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [160.244520] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [160.245441] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [160.245449] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [160.245455] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [160.246109] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [160.246236] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [160.246611] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [160.246781] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [160.246785] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [160.246905] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [160.251073] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [160.251078] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [160.251207] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [160.251212] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [160.251216] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [160.251220] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [160.251223] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [160.251244] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [160.251251] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [160.251265] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [160.251271] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [160.251295] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [160.251316] [drm:drm_client_modeset_probe] <7> [160.251303] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [160.255745] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [160.255761] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [160.255768] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [160.260748] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [160.260755] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [160.260760] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [160.262044] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [160.262987] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [160.263893] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [160.263900] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [160.263905] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [160.264339] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [160.264461] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [160.264873] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [160.265030] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [160.265033] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [160.265152] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [160.269339] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [160.269343] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [160.269470] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [160.269475] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [160.269479] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [160.269482] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [160.269485] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [160.269506] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [160.269513] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [160.269532] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [160.269541] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [160.269589] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [160.269595] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [160.271052] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [160.272302] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [160.273185] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [160.273244] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [160.273249] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [160.273887] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [160.274023] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [160.274436] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [160.274593] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [160.274597] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [160.274738] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [160.278830] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [160.278834] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [160.278960] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [160.281387] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [160.281393] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [160.285720] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [160.286127] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [160.286133] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [160.287408] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [160.288715] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [160.289479] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [160.289992] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [160.289998] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [160.290476] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [160.290595] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [160.290995] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [160.291152] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [160.291155] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [160.291271] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [160.295330] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [160.295334] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [160.295461] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [160.295820] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [160.295826] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [160.300737] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [160.300756] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [160.300761] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [160.302021] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [160.303223] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [160.304156] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [160.304177] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [160.304184] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [160.304614] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [160.304774] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [160.305184] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [160.305328] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [160.305331] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [160.305492] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [160.309545] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [160.309549] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [160.309691] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [160.465875] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [160.467149] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [160.467858] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [160.468500] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [160.469713] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [171.349171] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [171.359281] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [171.384477] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [171.394533] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [171.395355] [drm:drm_mode_setcrtc] [CRTC:51:pipe A] <7> [171.395617] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [171.395841] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [171.396346] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [171.397126] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [171.397288] [drm:drm_mode_setcrtc] [CRTC:72:pipe B] <7> [171.401808] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [171.402049] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [171.403543] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [171.404663] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [171.405631] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [171.406126] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [171.406245] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [171.406615] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [171.406788] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [171.406794] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [171.406913] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [171.411101] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [171.411106] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [171.411377] [drm:drm_mode_setcrtc] [CRTC:93:pipe C] <7> [171.522060] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [171.522298] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [171.522488] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [171.522723] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [171.523493] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [171.524383] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [171.529655] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [171.722867] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [171.731832] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [171.732156] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [171.732607] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [171.733155] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [171.733934] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [171.734472] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [171.735200] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [171.735637] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [171.736035] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [171.736475] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [171.737753] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [171.740172] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [171.741443] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [171.742491] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [171.743068] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [171.743186] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [171.743559] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [171.743764] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [171.743782] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [171.743926] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [171.748225] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [171.748229] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [171.771884] i915 0000:00:02.0: [drm] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [171.832286] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <6> [172.146323] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS <6> [172.146408] [IGT] i915_pm_rpm: exiting, ret=0

<6> [134.763935] [IGT] i915_pm_rpm: executing

<7> [134.769420] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [134.769845] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [134.769853] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [134.774693] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [134.774758] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [134.774763] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [134.775039] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [134.776528] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [134.777732] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [134.778495] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [134.778555] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [134.778561] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [134.779257] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [134.779380] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [134.780158] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [134.780311] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [134.780316] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [134.780431] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [134.784533] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [134.784537] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [134.784663] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [134.788223] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [134.788230] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [134.792753] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [134.793170] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [134.793176] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [134.794455] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [134.795650] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [134.796292] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [134.796739] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [134.796745] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [134.797169] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [134.797330] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [134.797706] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [134.797898] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [134.797901] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [134.798017] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [134.802159] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [134.802162] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [134.802289] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [134.802594] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [134.802599] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [134.807691] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [134.807709] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [134.807713] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [134.809049] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [134.810268] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [134.811316] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [134.811335] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [134.811340] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [134.811823] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [134.811952] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [134.812337] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [134.812495] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [134.812500] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [134.812632] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [134.816726] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [134.816731] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [134.816859] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [134.913860] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [134.914232] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [134.914543] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [134.914879] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [134.915652] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.865773] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]

<7> [145.866718] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.867280] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [145.868384] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [145.869375] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]

<7> [145.869496] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]

<7> [145.886815] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [145.887014] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [145.887180] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [145.887817] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.888451] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [145.892790] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [145.970907] [IGT] i915_pm_rpm: starting subtest module-reload

<7> [146.112843] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [146.118256] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [146.118567] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.119065] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [146.119780] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [146.120427] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [146.121003] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [146.121394] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [146.121805] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [146.122193] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [146.122654] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [146.127717] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [146.129327] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [146.130607] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [146.131567] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [146.132000] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [146.132125] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [146.132496] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [146.132657] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [146.132663] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [146.132798] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [146.137102] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [146.137106] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [146.159828] i915 0000:00:02.0: [drm] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [146.220250] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<6> [146.571300] [IGT] Reloading i915 w/o display

<7> [146.745176] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [146.745387] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [146.745547] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH

<7> [146.745737] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [146.745944] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [146.746085] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz

<7> [146.746642] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [146.746770] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [146.746926] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M

<6> [146.747036] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [146.747039] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [146.747255] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [146.747270] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047

<7> [146.747409] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K

<7> [146.747545] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7496 MiB [mem 0x00000000-0x1d4874fff], io: n/a

<7> [146.747650] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 31 MiB [mem 0x8a800000-0x8c6fffff], io: n/a

<7> [146.747976] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018

<7> [146.748148] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [146.748294] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [146.748439] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [146.748583] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [146.752740] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [146.752919] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [146.753092] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [146.753248] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [146.753419] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [146.753572] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [146.753711] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [146.753858] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [146.753971] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [146.754083] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [146.754194] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [146.754305] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [146.754416] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [146.754526] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [146.755279] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [146.755450] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196

<7> [146.755621] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [146.755852] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [146.756038] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [146.756225] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [146.756431] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812)

<7> [146.756603] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34)

<7> [146.756815] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [146.757003] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [146.757171] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [146.757338] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [146.757502] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [146.757666] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [146.757871] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6

<7> [146.758082] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [146.758249] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [146.758415] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [146.758580] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [146.758750] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [146.758948] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [146.759113] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3

<7> [146.759276] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [146.759440] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3

<7> [146.759604] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [146.759803] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [146.760021] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [146.760207] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [146.760443] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [146.761049] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [146.761218] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [146.761398] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [146.761604] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.761777] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [146.761985] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [146.762159] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [146.762357] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [146.762524] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [146.762723] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [146.762906] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [146.763105] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<7> [146.763590] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [146.764148] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [146.764301] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [146.764491] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [146.764637] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [146.765300] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [146.765462] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [146.765615] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [146.765720] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [146.765798] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [146.765943] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [146.766090] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [146.766236] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<6> [146.766309] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [146.766382] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [146.766527] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [146.768070] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [146.769551] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [146.769859] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] Using AUX CH A (VBT)

<7> [146.770094] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A]

<7> [146.772684] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [146.772880] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [146.773063] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [146.773217] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static

<7> [146.773377] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [146.773532] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [146.773717] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [146.773910] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [146.774064] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [146.774219] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0

<7> [146.774375] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1

<7> [146.774576] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0

<7> [146.774836] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [146.774981] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [146.775120] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [146.775258] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [146.775396] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [146.775606] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [146.776027] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on

<7> [146.776236] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [146.776458] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [146.776615] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [146.776867] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [146.777035] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [146.996680] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [147.007681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [147.018687] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [147.029681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [147.040681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [147.051681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [147.062682] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [147.073681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [147.084681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [147.095681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [147.106682] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [147.117681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [147.128680] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [147.139681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [147.150682] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [147.161680] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [147.172681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [147.183680] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [147.194682] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [147.205680] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [147.216681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [147.227681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [147.238682] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [147.249680] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [147.260682] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [147.271680] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [147.282682] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [147.293681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [147.304681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [147.315680] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [147.326682] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [147.337681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [147.337899] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110

<6> [147.337913] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP

<7> [147.337946] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off

<7> [147.338155] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [147.338394] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] Using AUX CH B (VBT)

<7> [147.338558] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B]

<7> [147.498702] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX B/DDI B/PHY B: Too many retries, giving up. First error: -6

<7> [147.498723] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [147.498972] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DDI C/PHY C] Using AUX CH C (VBT)

<7> [147.499213] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C]

<7> [147.500543] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [147.500798] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C]

<7> [147.501015] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:106:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [147.501576] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [147.501947] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [147.502272] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [147.502523] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [147.502804] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [147.503061] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [147.503309] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [147.503558] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [147.503838] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [147.504094] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [147.504341] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [147.504587] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [147.504866] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [147.505100] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A

<7> [147.505326] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B

<7> [147.505552] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C

<7> [147.505830] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [147.506062] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A

<7> [147.506287] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B

<7> [147.506511] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C

<7> [147.506791] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [147.507055] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [147.507317] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [147.507619] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [147.507964] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled

<7> [147.508158] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled

<7> [147.508349] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled

<7> [147.508510] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [147.508683] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [147.508857] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [147.509017] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [147.509185] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [147.509346] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [147.509505] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [147.509664] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [147.509843] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [147.510021] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [147.510181] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [147.510341] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [147.510561] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [147.510747] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [147.510927] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [147.511093] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [147.511261] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [147.511454] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [147.511614] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [147.511840] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [147.511958] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [147.512083] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [147.512226] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 6 GT workarounds on global

<7> [147.513227] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [147.513372] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [147.513512] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 14 context workarounds on rcs'0

<7> [147.524633] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [147.524791] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [147.524914] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [147.525033] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [147.525313] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [147.525521] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [147.525687] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [147.525880] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [147.526034] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [147.526277] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [147.530003] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [147.531146] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event

<7> [147.531705] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [147.532599] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event

<7> [147.532981] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event

<6> [147.533037] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0

<7> [147.534441] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected

<6> [147.550964] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [147.554203] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7

<7> [147.555233] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [147.556229] [drm:drm_client_modeset_probe]

<7> [147.556272] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [147.556282] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [147.556531] i915 0000:00:02.0: [drm] i915 display info: display version: 9

<7> [147.556537] i915 0000:00:02.0: [drm] i915 display info: cursor_needs_physical: no

<7> [147.556541] i915 0000:00:02.0: [drm] i915 display info: has_cdclk_crawl: no

<7> [147.556544] i915 0000:00:02.0: [drm] i915 display info: has_cdclk_squash: no

<7> [147.556546] i915 0000:00:02.0: [drm] i915 display info: has_ddi: yes

<7> [147.556549] i915 0000:00:02.0: [drm] i915 display info: has_dp_mst: yes

<7> [147.556553] i915 0000:00:02.0: [drm] i915 display info: has_dsb: no

<7> [147.556555] i915 0000:00:02.0: [drm] i915 display info: has_fpga_dbg: yes

<7> [147.556555] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] status updated from unknown to disconnected

<7> [147.556558] i915 0000:00:02.0: [drm] i915 display info: has_gmch: no

<7> [147.556560] i915 0000:00:02.0: [drm] i915 display info: has_hotplug: yes

<7> [147.556563] i915 0000:00:02.0: [drm] i915 display info: has_hti: no

<7> [147.556565] i915 0000:00:02.0: [drm] i915 display info: has_ipc: yes

<7> [147.556568] i915 0000:00:02.0: [drm] i915 display info: has_overlay: no

<7> [147.556571] i915 0000:00:02.0: [drm] i915 display info: has_psr: yes

<7> [147.556572] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [147.556574] i915 0000:00:02.0: [drm] i915 display info: has_psr_hw_tracking: yes

<7> [147.556577] i915 0000:00:02.0: [drm] i915 display info: overlay_needs_physical: no

<7> [147.556580] i915 0000:00:02.0: [drm] i915 display info: supports_tv: no

<7> [147.556582] i915 0000:00:02.0: [drm] i915 display info: has_hdcp: yes

<7> [147.556584] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [147.556585] i915 0000:00:02.0: [drm] i915 display info: has_dmc: yes

<7> [147.556588] i915 0000:00:02.0: [drm] i915 display info: has_dsc: no

<7> [147.556592] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [147.556593] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [147.556846] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] status updated from unknown to disconnected

<7> [147.556859] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [147.556866] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [147.556862] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [147.556874] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [147.557101] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected

<7> [147.557112] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [147.557119] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [147.557124] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [147.557130] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [147.557134] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [147.557176] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [147.557189] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [147.557210] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [147.557221] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [147.557113] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [147.557343] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [147.558159] [drm:drm_client_modeset_probe]

<7> [147.558088] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [147.558298] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [147.558469] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [147.558638] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [147.558646] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [147.558834] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [147.558842] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [147.558850] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [147.558841] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [147.559006] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [147.559010] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [147.559021] i915 0000:00:02.0: [drm] device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9

<7> [147.559025] i915 0000:00:02.0: [drm] device info: graphics version: 9

<7> [147.559027] i915 0000:00:02.0: [drm] device info: media version: 9

<7> [147.559029] i915 0000:00:02.0: [drm] device info: graphics stepping: F0

<7> [147.559031] i915 0000:00:02.0: [drm] device info: media stepping: F0

<7> [147.559033] i915 0000:00:02.0: [drm] device info: display stepping: C0

<7> [147.559034] i915 0000:00:02.0: [drm] device info: base die stepping: **

<7> [147.559036] i915 0000:00:02.0: [drm] device info: gt: 2

<7> [147.559039] i915 0000:00:02.0: [drm] device info: memory-regions: 0x21

<7> [147.559042] i915 0000:00:02.0: [drm] device info: page-sizes: 0x11000

<7> [147.559045] i915 0000:00:02.0: [drm] device info: platform: KABYLAKE

<7> [147.559047] i915 0000:00:02.0: [drm] device info: ppgtt-size: 48

<7> [147.559050] i915 0000:00:02.0: [drm] device info: ppgtt-type: 2

<7> [147.559053] i915 0000:00:02.0: [drm] device info: dma_mask_size: 39

<7> [147.559056] i915 0000:00:02.0: [drm] device info: is_mobile: no

<7> [147.559059] i915 0000:00:02.0: [drm] device info: is_lp: no

<7> [147.559061] i915 0000:00:02.0: [drm] device info: require_force_probe: no

<7> [147.559064] i915 0000:00:02.0: [drm] device info: is_dgfx: no

<7> [147.559067] i915 0000:00:02.0: [drm] device info: has_64bit_reloc: yes

<7> [147.559069] i915 0000:00:02.0: [drm] device info: has_64k_pages: no

<7> [147.559072] i915 0000:00:02.0: [drm] device info: gpu_reset_clobbers_display: no

<7> [147.559075] i915 0000:00:02.0: [drm] device info: has_reset_engine: yes

<7> [147.559078] i915 0000:00:02.0: [drm] device info: has_3d_pipeline: yes

<7> [147.559081] i915 0000:00:02.0: [drm] device info: has_flat_ccs: no

<7> [147.559084] i915 0000:00:02.0: [drm] device info: has_global_mocs: no

<7> [147.559087] i915 0000:00:02.0: [drm] device info: has_gmd_id: no

<7> [147.559090] i915 0000:00:02.0: [drm] device info: has_gt_uc: yes

<7> [147.559018] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [147.559093] i915 0000:00:02.0: [drm] device info: has_heci_pxp: no

<7> [147.559095] i915 0000:00:02.0: [drm] device info: has_heci_gscfi: no

<7> [147.559098] i915 0000:00:02.0: [drm] device info: has_guc_deprivilege: no

<7> [147.559101] i915 0000:00:02.0: [drm] device info: has_guc_tlb_invalidation: no

<7> [147.559103] i915 0000:00:02.0: [drm] device info: has_l3_ccs_read: no

<7> [147.559105] i915 0000:00:02.0: [drm] device info: has_l3_dpf: no

<7> [147.559108] i915 0000:00:02.0: [drm] device info: has_llc: yes

<7> [147.559110] i915 0000:00:02.0: [drm] device info: has_logical_ring_contexts: yes

<7> [147.559113] i915 0000:00:02.0: [drm] device info: has_logical_ring_elsq: no

<7> [147.559115] i915 0000:00:02.0: [drm] device info: has_media_ratio_mode: no

<7> [147.559118] i915 0000:00:02.0: [drm] device info: has_mslice_steering: no

<7> [147.559120] i915 0000:00:02.0: [drm] device info: has_oa_bpc_reporting: no

<7> [147.559123] i915 0000:00:02.0: [drm] device info: has_oa_slice_contrib_limits: no

<7> [147.559125] i915 0000:00:02.0: [drm] device info: has_oam: no

<7> [147.559127] i915 0000:00:02.0: [drm] device info: has_one_eu_per_fuse_bit: no

<7> [147.559129] i915 0000:00:02.0: [drm] device info: has_pxp: no

<7> [147.559132] i915 0000:00:02.0: [drm] device info: has_rc6: yes

<7> [147.559134] i915 0000:00:02.0: [drm] device info: has_rc6p: no

<7> [147.559136] i915 0000:00:02.0: [drm] device info: has_rps: yes

<7> [147.559139] i915 0000:00:02.0: [drm] device info: has_runtime_pm: yes

<7> [147.559142] i915 0000:00:02.0: [drm] device info: has_snoop: no

<7> [147.559144] i915 0000:00:02.0: [drm] device info: has_coherent_ggtt: yes

<7> [147.559147] i915 0000:00:02.0: [drm] device info: tuning_thread_rr_after_dep: no

<7> [147.559149] i915 0000:00:02.0: [drm] device info: unfenced_needs_alignment: no

<7> [147.559152] i915 0000:00:02.0: [drm] device info: hws_needs_physical: no

<7> [147.559154] i915 0000:00:02.0: [drm] device info: has_pooled_eu: no

<7> [147.559156] i915 0000:00:02.0: [drm] device info: rawclk rate: 24000 kHz

<7> [147.559159] i915 0000:00:02.0: [drm] device info: iommu: enabled

<7> [147.559162] i915 0000:00:02.0: [drm] device info: available engines: 40403

<7> [147.559165] i915 0000:00:02.0: [drm] device info: slice total: 1, mask=0001

<7> [147.559168] i915 0000:00:02.0: [drm] device info: subslice total: 3

<7> [147.559169] i915 0000:00:02.0: [drm] device info: slice0: 3 subslices, mask=00000007

<7> [147.559171] i915 0000:00:02.0: [drm] device info: slice1: 0 subslices, mask=00000000

<7> [147.559173] i915 0000:00:02.0: [drm] device info: slice2: 0 subslices, mask=00000000

<7> [147.559174] i915 0000:00:02.0: [drm] device info: EU total: 24

<7> [147.559176] i915 0000:00:02.0: [drm] device info: EU per subslice: 8

<7> [147.559177] i915 0000:00:02.0: [drm] device info: has slice power gating: no

<7> [147.559179] i915 0000:00:02.0: [drm] device info: has subslice power gating: no

<7> [147.559180] i915 0000:00:02.0: [drm] device info: has EU power gating: yes

<6> [147.559182] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [147.559183] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [147.559184] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [147.559215] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [147.559223] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [147.559228] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [147.559233] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [147.559238] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [147.559270] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [147.559282] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [147.559301] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [147.559311] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [147.563056] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [147.706442] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [147.707543] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [147.708099] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [147.708726] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [147.709748] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [158.613261] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [158.622822] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [158.647487] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [158.653317] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [158.653892] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [158.654124] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [158.654342] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [158.654544] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [158.654723] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [158.655026] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [158.660871] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [158.847842] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [158.857892] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [158.858730] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [158.859131] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [158.859946] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [158.860848] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [158.861379] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [158.861764] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [158.862128] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [158.862490] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [158.862897] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [158.863298] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [158.863627] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [158.893829] i915 0000:00:02.0: [drm] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [158.947114] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<6> [159.252411] [IGT] Reloading i915 as normal

<7> [159.406076] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [159.406302] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [159.406472] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH

<7> [159.406623] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [159.406906] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [159.407064] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz

<7> [159.407648] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [159.407829] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [159.407987] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M

<6> [159.408108] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [159.408112] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [159.408331] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [159.408346] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047

<7> [159.408495] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K

<7> [159.408642] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7496 MiB [mem 0x00000000-0x1d4874fff], io: n/a

<7> [159.408775] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 31 MiB [mem 0x8a800000-0x8c6fffff], io: n/a

<7> [159.409120] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018

<7> [159.409302] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [159.409458] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [159.409612] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [159.409778] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [159.413710] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [159.413876] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [159.414032] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [159.414188] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [159.414343] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [159.414463] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [159.414576] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [159.414734] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [159.414864] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [159.414975] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [159.415087] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [159.415197] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [159.415307] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [159.415417] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [159.416031] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [159.416192] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196

<7> [159.416351] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [159.416509] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [159.416667] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [159.416841] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [159.417078] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812)

<7> [159.417235] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34)

<7> [159.417392] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [159.417550] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [159.417717] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [159.417874] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [159.418030] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [159.418183] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [159.418336] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6

<7> [159.418491] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [159.418648] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [159.418810] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [159.419040] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [159.419193] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [159.419346] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [159.419498] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3

<7> [159.419650] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [159.419812] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3

<7> [159.420042] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [159.420206] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [159.420394] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [159.420563] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [159.420746] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [159.421317] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [159.421475] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [159.421643] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [159.421871] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [159.422076] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [159.422230] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [159.422395] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [159.422580] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [159.422743] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [159.422941] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [159.423095] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [159.423282] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<7> [159.423901] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [159.424063] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [159.424216] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [159.424369] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<6> [159.424904] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [159.424905] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [159.425404] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [159.425558] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [159.425744] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [159.425933] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [159.426080] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [159.426226] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [159.426371] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [159.426516] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [159.426731] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [159.426914] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [159.428045] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [159.429026] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [159.429214] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] Using AUX CH A (VBT)

<7> [159.429380] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A]

<7> [159.431705] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [159.431877] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [159.432077] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [159.432258] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static

<7> [159.432419] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [159.432574] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [159.432783] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [159.432974] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [159.433128] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [159.433281] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0

<7> [159.433435] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1

<7> [159.433666] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0

<7> [159.433951] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [159.434109] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [159.434248] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [159.434387] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [159.434526] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [159.434828] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [159.435179] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on

<7> [159.435413] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [159.435644] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [159.435860] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [159.436094] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [159.436254] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [159.652685] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.663681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.674684] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.685681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.696682] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.707681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.718682] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.729682] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.740682] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.751681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.762684] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.773680] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.784681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.795682] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.806681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.817681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.828683] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.839680] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.850681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.861683] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.872681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.883681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.894683] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.905680] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.916681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.927683] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.938681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.949680] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.960684] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.971683] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.982681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.993681] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.993903] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110

<6> [159.993919] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP

<7> [159.993953] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off

<7> [159.994159] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [159.994441] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] Using AUX CH B (VBT)

<7> [159.994605] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B]

<7> [160.154742] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX B/DDI B/PHY B: Too many retries, giving up. First error: -6

<7> [160.154764] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [160.155019] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DDI C/PHY C] Using AUX CH C (VBT)

<7> [160.155268] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C]

<7> [160.156748] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [160.156995] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C]

<7> [160.157226] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:106:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [160.157883] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [160.158222] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [160.158556] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [160.158831] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [160.159088] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [160.159439] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [160.159813] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [160.160098] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [160.160358] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [160.160617] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [160.160888] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [160.161146] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [160.161406] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [160.161698] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A

<7> [160.161934] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B

<7> [160.162170] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C

<7> [160.162429] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [160.162664] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A

<7> [160.162921] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B

<7> [160.163266] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C

<7> [160.163644] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [160.163940] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [160.164201] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [160.164382] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [160.164607] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled

<7> [160.164810] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled

<7> [160.165002] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled

<7> [160.165164] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [160.165324] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [160.165489] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [160.165679] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [160.165850] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [160.166013] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [160.166175] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [160.166335] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [160.166503] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [160.166666] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [160.166862] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [160.167093] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [160.167425] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [160.167619] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [160.167798] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [160.168009] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [160.168165] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [160.168314] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [160.168461] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [160.168640] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [160.168768] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [160.168937] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [160.169080] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 6 GT workarounds on global

<7> [160.170154] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [160.170299] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [160.170439] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 14 context workarounds on rcs'0

<7> [160.182298] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [160.182440] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [160.182562] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [160.182721] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [160.183089] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [160.183357] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [160.183506] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [160.183651] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [160.183839] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [160.184035] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [160.186943] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [160.187568] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event

<7> [160.187895] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [160.188482] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event

<7> [160.188796] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event

<6> [160.188849] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0

<7> [160.190309] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected

<6> [160.202629] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [160.204519] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8

<7> [160.205083] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [160.206176] [drm:drm_client_modeset_probe]

<7> [160.206223] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [160.206233] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [160.206565] i915 0000:00:02.0: [drm] i915 display info: display version: 9

<7> [160.206570] i915 0000:00:02.0: [drm] i915 display info: cursor_needs_physical: no

<7> [160.206574] i915 0000:00:02.0: [drm] i915 display info: has_cdclk_crawl: no

<7> [160.206576] i915 0000:00:02.0: [drm] i915 display info: has_cdclk_squash: no

<7> [160.206580] i915 0000:00:02.0: [drm] i915 display info: has_ddi: yes

<7> [160.206583] i915 0000:00:02.0: [drm] i915 display info: has_dp_mst: yes

<7> [160.206586] i915 0000:00:02.0: [drm] i915 display info: has_dsb: no

<7> [160.206589] i915 0000:00:02.0: [drm] i915 display info: has_fpga_dbg: yes

<7> [160.206591] i915 0000:00:02.0: [drm] i915 display info: has_gmch: no

<7> [160.206594] i915 0000:00:02.0: [drm] i915 display info: has_hotplug: yes

<7> [160.206597] i915 0000:00:02.0: [drm] i915 display info: has_hti: no

<7> [160.206600] i915 0000:00:02.0: [drm] i915 display info: has_ipc: yes

<7> [160.206603] i915 0000:00:02.0: [drm] i915 display info: has_overlay: no

<7> [160.206606] i915 0000:00:02.0: [drm] i915 display info: has_psr: yes

<7> [160.206609] i915 0000:00:02.0: [drm] i915 display info: has_psr_hw_tracking: yes

<7> [160.206612] i915 0000:00:02.0: [drm] i915 display info: overlay_needs_physical: no

<7> [160.206615] i915 0000:00:02.0: [drm] i915 display info: supports_tv: no

<7> [160.206618] i915 0000:00:02.0: [drm] i915 display info: has_hdcp: yes

<7> [160.206621] i915 0000:00:02.0: [drm] i915 display info: has_dmc: yes

<7> [160.206624] i915 0000:00:02.0: [drm] i915 display info: has_dsc: no

<7> [160.206628] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [160.207006] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [160.207241] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [160.207473] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [160.208173] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [160.208361] i915 0000:00:02.0: [drm] device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9

<7> [160.208365] i915 0000:00:02.0: [drm] device info: graphics version: 9

<7> [160.208367] i915 0000:00:02.0: [drm] device info: media version: 9

<7> [160.208369] i915 0000:00:02.0: [drm] device info: graphics stepping: F0

<7> [160.208371] i915 0000:00:02.0: [drm] device info: media stepping: F0

<7> [160.208372] i915 0000:00:02.0: [drm] device info: display stepping: C0

<7> [160.208374] i915 0000:00:02.0: [drm] device info: base die stepping: **

<7> [160.208376] i915 0000:00:02.0: [drm] device info: gt: 2

<7> [160.208377] i915 0000:00:02.0: [drm] device info: memory-regions: 0x21

<7> [160.208379] i915 0000:00:02.0: [drm] device info: page-sizes: 0x11000

<7> [160.208381] i915 0000:00:02.0: [drm] device info: platform: KABYLAKE

<7> [160.208382] i915 0000:00:02.0: [drm] device info: ppgtt-size: 48

<7> [160.208384] i915 0000:00:02.0: [drm] device info: ppgtt-type: 2

<7> [160.208386] i915 0000:00:02.0: [drm] device info: dma_mask_size: 39

<7> [160.208388] i915 0000:00:02.0: [drm] device info: is_mobile: no

<7> [160.208389] i915 0000:00:02.0: [drm] device info: is_lp: no

<7> [160.208391] i915 0000:00:02.0: [drm] device info: require_force_probe: no

<7> [160.208393] i915 0000:00:02.0: [drm] device info: is_dgfx: no

<7> [160.208394] i915 0000:00:02.0: [drm] device info: has_64bit_reloc: yes

<7> [160.208396] i915 0000:00:02.0: [drm] device info: has_64k_pages: no

<7> [160.208398] i915 0000:00:02.0: [drm] device info: gpu_reset_clobbers_display: no

<7> [160.208399] i915 0000:00:02.0: [drm] device info: has_reset_engine: yes

<7> [160.208401] i915 0000:00:02.0: [drm] device info: has_3d_pipeline: yes

<7> [160.208403] i915 0000:00:02.0: [drm] device info: has_flat_ccs: no

<7> [160.208404] i915 0000:00:02.0: [drm] device info: has_global_mocs: no

<7> [160.208406] i915 0000:00:02.0: [drm] device info: has_gmd_id: no

<7> [160.208407] i915 0000:00:02.0: [drm] device info: has_gt_uc: yes

<7> [160.208409] i915 0000:00:02.0: [drm] device info: has_heci_pxp: no

<7> [160.208411] i915 0000:00:02.0: [drm] device info: has_heci_gscfi: no

<7> [160.208412] i915 0000:00:02.0: [drm] device info: has_guc_deprivilege: no

<7> [160.208414] i915 0000:00:02.0: [drm] device info: has_guc_tlb_invalidation: no

<7> [160.208416] i915 0000:00:02.0: [drm] device info: has_l3_ccs_read: no

<7> [160.208417] i915 0000:00:02.0: [drm] device info: has_l3_dpf: no

<7> [160.208419] i915 0000:00:02.0: [drm] device info: has_llc: yes

<7> [160.208420] i915 0000:00:02.0: [drm] device info: has_logical_ring_contexts: yes

<7> [160.208422] i915 0000:00:02.0: [drm] device info: has_logical_ring_elsq: no

<7> [160.208424] i915 0000:00:02.0: [drm] device info: has_media_ratio_mode: no

<7> [160.208425] i915 0000:00:02.0: [drm] device info: has_mslice_steering: no

<7> [160.208427] i915 0000:00:02.0: [drm] device info: has_oa_bpc_reporting: no

<7> [160.208428] i915 0000:00:02.0: [drm] device info: has_oa_slice_contrib_limits: no

<7> [160.208430] i915 0000:00:02.0: [drm] device info: has_oam: no

<7> [160.208432] i915 0000:00:02.0: [drm] device info: has_one_eu_per_fuse_bit: no

<7> [160.208433] i915 0000:00:02.0: [drm] device info: has_pxp: no

<7> [160.208435] i915 0000:00:02.0: [drm] device info: has_rc6: yes

<7> [160.208437] i915 0000:00:02.0: [drm] device info: has_rc6p: no

<7> [160.208438] i915 0000:00:02.0: [drm] device info: has_rps: yes

<7> [160.208440] i915 0000:00:02.0: [drm] device info: has_runtime_pm: yes

<7> [160.208441] i915 0000:00:02.0: [drm] device info: has_snoop: no

<7> [160.208443] i915 0000:00:02.0: [drm] device info: has_coherent_ggtt: yes

<7> [160.208445] i915 0000:00:02.0: [drm] device info: tuning_thread_rr_after_dep: no

<7> [160.208446] i915 0000:00:02.0: [drm] device info: unfenced_needs_alignment: no

<7> [160.208448] i915 0000:00:02.0: [drm] device info: hws_needs_physical: no

<7> [160.208449] i915 0000:00:02.0: [drm] device info: has_pooled_eu: no

<7> [160.208451] i915 0000:00:02.0: [drm] device info: rawclk rate: 24000 kHz

<7> [160.208453] i915 0000:00:02.0: [drm] device info: iommu: enabled

<7> [160.208455] i915 0000:00:02.0: [drm] device info: available engines: 40403

<7> [160.208457] i915 0000:00:02.0: [drm] device info: slice total: 1, mask=0001

<7> [160.208459] i915 0000:00:02.0: [drm] device info: subslice total: 3

<7> [160.208461] i915 0000:00:02.0: [drm] device info: slice0: 3 subslices, mask=00000007

<7> [160.208463] i915 0000:00:02.0: [drm] device info: slice1: 0 subslices, mask=00000000

<7> [160.208465] i915 0000:00:02.0: [drm] device info: slice2: 0 subslices, mask=00000000

<7> [160.208466] i915 0000:00:02.0: [drm] device info: EU total: 24

<7> [160.208468] i915 0000:00:02.0: [drm] device info: EU per subslice: 8

<7> [160.208470] i915 0000:00:02.0: [drm] device info: has slice power gating: no

<7> [160.208471] i915 0000:00:02.0: [drm] device info: has subslice power gating: no

<7> [160.208473] i915 0000:00:02.0: [drm] device info: has EU power gating: yes

<6> [160.208475] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [160.208476] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [160.208478] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [160.210775] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] status updated from unknown to disconnected

<7> [160.210794] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [160.210803] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [160.210811] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [160.212767] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [160.213717] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [160.214651] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] status updated from unknown to disconnected

<7> [160.214666] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [160.214690] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [160.214698] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [160.215697] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [160.215929] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [160.216442] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [160.216727] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [160.216735] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [160.216952] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [160.221405] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [160.221412] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [160.221654] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected

<7> [160.221689] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [160.221697] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [160.221704] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [160.221709] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [160.221714] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [160.221755] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [160.221768] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [160.221795] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [160.221806] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [160.221927] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [160.226771] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [160.228345] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [160.229642] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [160.230679] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [160.231365] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [160.231516] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [160.231934] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [160.232117] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [160.232122] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [160.232270] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [160.236685] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [160.236696] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [160.237412] [drm:drm_client_modeset_probe]

<7> [160.237440] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [160.237448] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [160.240657] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [160.241719] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [160.241729] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [160.241735] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [160.243233] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [160.244520] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [160.245441] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [160.245449] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [160.245455] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [160.246109] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [160.246236] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [160.246611] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [160.246781] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [160.246785] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [160.246905] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [160.251073] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [160.251078] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [160.251207] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [160.251212] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [160.251216] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [160.251220] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [160.251223] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [160.251244] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [160.251251] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [160.251265] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [160.251271] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [160.251295] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [160.251316] [drm:drm_client_modeset_probe]

<7> [160.251303] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [160.255745] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [160.255761] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [160.255768] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [160.260748] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [160.260755] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [160.260760] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [160.262044] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [160.262987] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [160.263893] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [160.263900] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [160.263905] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [160.264339] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [160.264461] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [160.264873] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [160.265030] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [160.265033] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [160.265152] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [160.269339] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [160.269343] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [160.269470] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [160.269475] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [160.269479] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [160.269482] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [160.269485] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [160.269506] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [160.269513] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [160.269532] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [160.269541] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [160.269589] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [160.269595] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [160.271052] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [160.272302] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [160.273185] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [160.273244] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [160.273249] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [160.273887] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [160.274023] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [160.274436] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [160.274593] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [160.274597] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [160.274738] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [160.278830] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [160.278834] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [160.278960] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [160.281387] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [160.281393] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [160.285720] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [160.286127] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [160.286133] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [160.287408] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [160.288715] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [160.289479] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [160.289992] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [160.289998] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [160.290476] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [160.290595] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [160.290995] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [160.291152] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [160.291155] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [160.291271] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [160.295330] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [160.295334] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [160.295461] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [160.295820] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [160.295826] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [160.300737] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [160.300756] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [160.300761] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [160.302021] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [160.303223] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [160.304156] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [160.304177] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [160.304184] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [160.304614] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [160.304774] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [160.305184] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [160.305328] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [160.305331] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [160.305492] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [160.309545] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [160.309549] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [160.309691] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [160.465875] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [160.467149] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [160.467858] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [160.468500] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [160.469713] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [171.349171] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [171.359281] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [171.384477] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [171.394533] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [171.395355] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]

<7> [171.395617] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [171.395841] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [171.396346] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [171.397126] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [171.397288] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]

<7> [171.401808] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [171.402049] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [171.403543] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [171.404663] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [171.405631] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [171.406126] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [171.406245] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [171.406615] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [171.406788] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [171.406794] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [171.406913] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [171.411101] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [171.411106] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [171.411377] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]

<7> [171.522060] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [171.522298] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [171.522488] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [171.522723] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [171.523493] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [171.524383] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [171.529655] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [171.722867] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [171.731832] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [171.732156] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [171.732607] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [171.733155] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [171.733934] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [171.734472] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [171.735200] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [171.735637] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [171.736035] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [171.736475] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [171.737753] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [171.740172] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [171.741443] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [171.742491] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [171.743068] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [171.743186] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [171.743559] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [171.743764] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [171.743782] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [171.743926] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [171.748225] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [171.748229] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [171.771884] i915 0000:00:02.0: [drm] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [171.832286] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<6> [172.146323] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS

<6> [172.146408] [IGT] i915_pm_rpm: exiting, ret=0

Results for igt@i915_pm_rpm@module-reload