Results for igt@kms_force_connector_basic@force-edid

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Duration 0.05 seconds
Igt-Version 
IGT-Version: 1.28-g86712f2ef (x86_64) (Linux: 6.9.0-linus-v6.9-ga38297e3fb01+ x86_64)
Out 
Using IGT_SRANDOM=1715549006 for randomisation
Opened device: /dev/dri/card0
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.048s)
Err 
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.048s)
Dmesg
<6> [160.907854] Console: switching to colour dummy device 80x25
<6> [160.908207] [IGT] kms_force_connector_basic: executing
<7> [160.929819] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [160.932412] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [160.946401] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [160.948591] [drm:status_store] [CONNECTOR:267:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [160.948607] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1]
<7> [160.948619] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:267:HDMI-A-1]
<7> [160.949233] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [160.949473] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [160.949939] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [160.950215] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [160.950223] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [160.950357] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_TC3
<7> [160.950441] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc3. force bit now 1
<7> [160.957114] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [160.957121] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc3. force bit now 0
<7> [160.957379] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1] disconnected
<7> [160.957420] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1]
<7> [160.957428] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:267:HDMI-A-1]
<7> [160.958008] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [160.958239] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [160.958658] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [160.958869] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [160.958874] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [160.959073] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc3. force bit now 1
<7> [160.965391] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [160.965397] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc3. force bit now 0
<7> [160.965609] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1] disconnected
<7> [160.965813] [drm:status_store] [CONNECTOR:273:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [160.965821] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:HDMI-A-2]
<7> [160.965829] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:273:HDMI-A-2]
<7> [160.970209] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:HDMI-A-2] disconnected
<7> [160.970257] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:HDMI-A-2]
<7> [160.970265] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:273:HDMI-A-2]
<7> [160.975236] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:HDMI-A-2] disconnected
<7> [160.975268] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1]
<7> [160.975275] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:267:HDMI-A-1]
<7> [160.975838] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [160.976046] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [160.976475] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [160.976681] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [160.976686] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [160.976880] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc3. force bit now 1
<7> [160.983153] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [160.983159] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc3. force bit now 0
<7> [160.983372] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1] disconnected
<6> [160.983935] [IGT] kms_force_connector_basic: starting subtest force-edid
<7> [160.984133] [drm:status_store] [CONNECTOR:267:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [160.984154] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1]
<7> [160.984164] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:267:HDMI-A-1]
<7> [160.984623] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [160.984826] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [160.985252] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [160.985457] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [160.985471] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [160.985667] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc3. force bit now 1
<7> [160.991979] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [160.991989] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc3. force bit now 0
<7> [160.992208] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1] status updated from disconnected to connected
<7> [160.992396] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1] probed modes :
<7> [160.992403] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [160.992412] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [160.992418] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [160.992424] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [160.992429] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [160.992470] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1]
<7> [160.992477] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:267:HDMI-A-1]
<7> [160.993180] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [160.993382] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [160.993806] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [160.994008] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [160.994019] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [160.994226] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc3. force bit now 1
<7> [161.000529] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [161.000538] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc3. force bit now 0
<7> [161.000798] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1] probed modes :
<7> [161.000804] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [161.000811] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [161.000816] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [161.000821] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [161.000826] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [161.004505] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:267:HDMI-A-1] EDID override set
<7> [161.004551] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1]
<7> [161.004561] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:267:HDMI-A-1]
<7> [161.005095] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:267:HDMI-A-1] ELD monitor IGT
<7> [161.005102] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:267:HDMI-A-1] ELD size 24, SAD count 0
<7> [161.005388] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [161.005630] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [161.006062] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [161.006312] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [161.006452] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [161.006461] [drm:drm_mode_prune_invalid] Not using 800x600 mode: STALE
<7> [161.006471] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [161.006477] [drm:drm_mode_prune_invalid] Not using 848x480 mode: STALE
<7> [161.006486] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1] probed modes :
<7> [161.006493] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [161.006500] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [161.006506] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [161.006511] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [161.006516] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [161.006683] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:267:HDMI-A-1] EDID override reset
<7> [161.006775] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1]
<7> [161.006783] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:267:HDMI-A-1]
<7> [161.007243] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [161.007448] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [161.007867] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [161.008074] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [161.008083] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [161.008295] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc3. force bit now 1
<7> [161.014576] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [161.014586] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc3. force bit now 0
<7> [161.014787] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:267:HDMI-A-1] EDID changed, epoch counter 2
<7> [161.014859] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [161.014866] [drm:drm_mode_prune_invalid] Not using 1920x1080 mode: STALE
<7> [161.014874] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [161.014879] [drm:drm_mode_prune_invalid] Not using 1280x720 mode: STALE
<7> [161.014888] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1] probed modes :
<7> [161.014894] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [161.014900] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [161.014905] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [161.014910] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [161.014915] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [161.015098] [drm:status_store] [CONNECTOR:267:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [161.015107] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1]
<7> [161.015115] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:267:HDMI-A-1]
<7> [161.015725] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [161.015929] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [161.016362] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [161.016566] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [161.016572] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [161.016765] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc3. force bit now 1
<7> [161.023287] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [161.023294] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc3. force bit now 0
<7> [161.023528] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1] status updated from connected to disconnected
<7> [161.023546] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1] disconnected
<7> [161.023687] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1]
<7> [161.023696] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:267:HDMI-A-1]
<7> [161.024301] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [161.024505] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [161.024930] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [161.025157] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [161.025162] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [161.025357] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc3. force bit now 1
<7> [161.031650] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [161.031656] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc3. force bit now 0
<7> [161.031869] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1] disconnected
<6> [161.032472] [IGT] kms_force_connector_basic: finished subtest force-edid, SUCCESS
<7> [161.032675] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [161.034388] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:236:DP-1] EDID override reset
<7> [161.034416] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1]
<7> [161.034425] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]
<7> [161.034834] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1] disconnected
<7> [161.034977] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:250:DP-2] EDID override reset
<7> [161.035001] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:250:DP-2]
<7> [161.035008] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:250:DP-2]
<7> [161.035447] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:250:DP-2] disconnected
<7> [161.035601] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:259:DP-3] EDID override reset
<7> [161.035624] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:259:DP-3]
<7> [161.035631] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:259:DP-3]
<7> [161.036110] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_TC3
<7> [161.043885] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC3/DDI TC3/PHY TC3: Base DPCD: 12 14 c4 01 01 00 01 80 02 00 06 00 00 00 80
<7> [161.043922] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC3/DDI TC3/PHY TC3: DPCD: 14 14 c4 01 01 00 01 80 02 00 06 00 00 00 80
<7> [161.045741] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:259:DP-3][ENCODER:258:DDI TC3/PHY TC3][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [161.051278] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC3/DDI TC3/PHY TC3: Base DPCD: 12 14 c4 01 01 00 01 80 02 00 06 00 00 00 80
<7> [161.051315] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC3/DDI TC3/PHY TC3: DPCD: 14 14 c4 01 01 00 01 80 02 00 06 00 00 00 80
<7> [161.053135] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX USBC3/DDI TC3/PHY TC3: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000
<7> [161.064583] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel
<7> [161.068533] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [161.070555] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0
<7> [161.072273] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:258:DDI TC3/PHY TC3] MST support: port: yes, sink: no, modparam: yes
<7> [161.072559] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [161.072841] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
<7> [161.073117] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
<7> [161.100794] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:259:DP-3] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [161.100806] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:259:DP-3] ELD monitor LG HDR 4K
<7> [161.100813] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:259:DP-3] ELD size 32, SAD count 1
<7> [161.100841] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:259:DP-3] VRR capable: no
<7> [161.101177] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:259:DP-3] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [161.103263] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [161.103545] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:259:DP-3] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [161.105660] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:259:DP-3] probed modes :
<7> [161.105670] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 533250 3840 3888 3920 4000 2160 2214 2219 2222 0x48 0x9
<7> [161.105679] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 266640 3840 3848 3992 4000 2160 2214 2219 2222 0x40 0x9
<7> [161.105685] [drm:drm_mode_debug_printmodeline] Modeline "2560x1440": 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x40 0x9
<7> [161.105692] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [161.105698] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [161.105704] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [161.105710] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
<7> [161.105716] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [161.105722] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6
<7> [161.105728] [drm:drm_mode_debug_printmodeline] Modeline "1152x864": 60 81579 1152 1216 1336 1520 864 865 868 895 0x0 0x6
<7> [161.105734] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [161.105740] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [161.105747] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [161.105753] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [161.105759] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [161.105765] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
<7> [161.105771] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
<7> [161.105777] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
<7> [161.105783] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [161.105789] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [161.106096] [drm:status_store] [CONNECTOR:267:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [161.106107] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1]
<7> [161.106118] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:267:HDMI-A-1]
<7> [161.106820] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [161.107074] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [161.107570] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [161.107819] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [161.107826] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [161.108044] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc3. force bit now 1
<7> [161.114408] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [161.114415] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc3. force bit now 0
<7> [161.114639] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1] disconnected
<7> [161.114686] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1]
<7> [161.114693] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:267:HDMI-A-1]
<7> [161.115267] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [161.115476] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [161.115892] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [161.116101] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [161.116107] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [161.116317] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc3. force bit now 1
<7> [161.122588] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [161.122594] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc3. force bit now 0
<7> [161.122802] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1] disconnected
<7> [161.122940] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:267:HDMI-A-1] EDID override reset
<7> [161.122966] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1]
<7> [161.122973] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:267:HDMI-A-1]
<7> [161.123527] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [161.123720] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [161.124162] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [161.124359] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [161.124364] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [161.124555] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc3. force bit now 1
<7> [161.130859] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [161.130865] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc3. force bit now 0
<7> [161.131078] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1] disconnected
<7> [161.131297] [drm:status_store] [CONNECTOR:273:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [161.131307] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:HDMI-A-2]
<7> [161.131315] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:273:HDMI-A-2]
<7> [161.136206] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:HDMI-A-2] disconnected
<7> [161.136238] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:HDMI-A-2]
<7> [161.136245] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:273:HDMI-A-2]
<7> [161.141225] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:HDMI-A-2] disconnected
<7> [161.141353] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:273:HDMI-A-2] EDID override reset
<7> [161.141378] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:HDMI-A-2]
<7> [161.141385] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:273:HDMI-A-2]
<7> [161.146192] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:HDMI-A-2] disconnected
<6> [161.147120] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [161.147872] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [161.153006] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0]
<7> [161.153019] [drm:drm_client_modeset_probe]
<7> [161.153077] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1]
<7> [161.153089] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]
<7> [161.153580] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1] disconnected
<7> [161.153592] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:250:DP-2]
<7> [161.153601] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:250:DP-2]
<7> [161.154021] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:250:DP-2] disconnected
<7> [161.154029] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:259:DP-3]
<7> [161.154038] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:259:DP-3]
<7> [161.160669] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC3/DDI TC3/PHY TC3: Base DPCD: 12 14 c4 01 01 00 01 80 02 00 06 00 00 00 80
<7> [161.160699] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC3/DDI TC3/PHY TC3: DPCD: 14 14 c4 01 01 00 01 80 02 00 06 00 00 00 80
<7> [161.162502] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:259:DP-3][ENCODER:258:DDI TC3/PHY TC3][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [161.168514] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC3/DDI TC3/PHY TC3: Base DPCD: 12 14 c4 01 01 00 01 80 02 00 06 00 00 00 80
<7> [161.168550] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC3/DDI TC3/PHY TC3: DPCD: 14 14 c4 01 01 00 01 80 02 00 06 00 00 00 80
<7> [161.170619] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX USBC3/DDI TC3/PHY TC3: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000
<7> [161.181435] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel
<7> [161.185281] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [161.187592] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0
<7> [161.189591] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:258:DDI TC3/PHY TC3] MST support: port: yes, sink: no, modparam: yes
<7> [161.189858] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [161.190124] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
<7> [161.190404] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
<7> [161.217833] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:259:DP-3] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [161.217844] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:259:DP-3] ELD monitor LG HDR 4K
<7> [161.217852] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:259:DP-3] ELD size 32, SAD count 1
<7> [161.217881] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:259:DP-3] VRR capable: no
<7> [161.218196] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:259:DP-3] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [161.220268] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [161.220528] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:259:DP-3] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [161.222676] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:259:DP-3] probed modes :
<7> [161.222686] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 533250 3840 3888 3920 4000 2160 2214 2219 2222 0x48 0x9
<7> [161.222695] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 266640 3840 3848 3992 4000 2160 2214 2219 2222 0x40 0x9
<7> [161.222701] [drm:drm_mode_debug_printmodeline] Modeline "2560x1440": 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x40 0x9
<7> [161.222708] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [161.222714] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [161.222721] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [161.222727] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
<7> [161.222733] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [161.222740] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6
<7> [161.222746] [drm:drm_mode_debug_printmodeline] Modeline "1152x864": 60 81579 1152 1216 1336 1520 864 865 868 895 0x0 0x6
<7> [161.222753] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [161.222759] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [161.222765] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [161.222772] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [161.222778] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [161.222784] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
<7> [161.222791] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
<7> [161.222797] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
<7> [161.222804] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [161.222810] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [161.222818] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1]
<7> [161.222828] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:267:HDMI-A-1]
<7> [161.223508] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [161.223758] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [161.224247] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [161.224493] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [161.224499] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [161.224728] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc3. force bit now 1
<7> [161.231047] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [161.231053] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc3. force bit now 0
<7> [161.231285] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1] disconnected
<7> [161.231294] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:HDMI-A-2]
<7> [161.231301] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:273:HDMI-A-2]
<7> [161.236203] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:HDMI-A-2] disconnected
<7> [161.236211] [drm:drm_client_modeset_probe] connector 236 enabled? no
<7> [161.236218] [drm:drm_client_modeset_probe] connector 250 enabled? no
<7> [161.236224] [drm:drm_client_modeset_probe] connector 259 enabled? yes
<7> [161.236229] [drm:drm_client_modeset_probe] connector 267 enabled? no
<7> [161.236235] [drm:drm_client_modeset_probe] connector 273 enabled? no
<7> [161.236286] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [161.236303] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 259
<7> [161.236308] [drm:drm_client_modeset_probe] looking for preferred mode on connector 259 0
<7> [161.236314] [drm:drm_client_modeset_probe] found mode 3840x2160
<7> [161.236319] [drm:drm_client_modeset_probe] picking CRTCs for 3840x2160 config
<7> [161.236341] [drm:drm_client_modeset_probe] desired mode 3840x2160 set on crtc 80 (0,0)
<6> [161.270384] Console: switching to colour frame buffer device 480x135
Created at 2024-05-12 22:37:22