igt@kms_pm_rpm@basic-pci-d3-state on bat-adlp-9@linus-v6.9 Test details

Detail	Value
Duration	2.27 seconds
Igt-Version	IGT-Version: 1.28-g86712f2ef (x86_64) (Linux: 6.9.0-linus-v6.9-ga38297e3fb01+ x86_64)
Out	Using IGT_SRANDOM=1715549098 for randomisation Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: 0000:00:02.0@ffff888109b333d8 has 1/1 users at track_intel_runtime_pm_wakeref.part.0+0x30/0x60 [i915] __intel_display_power_put_async+0x3d/0x160 [i915] intel_atomic_commit_tail+0xb0b/0xfa0 [i915] intel_atomic_commit+0x330/0x380 [i915] drm_atomic_commit+0x9a/0xd0 drm_atomic_helper_set_config+0x77/0xc0 drm_mode_setcrtc+0x1f4/0x740 drm_ioctl_kernel+0xa8/0x100 drm_ioctl+0x222/0x430 __x64_sys_ioctl+0x79/0xb0 do_syscall_64+0x69/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e Starting subtest: basic-pci-d3-state Subtest basic-pci-d3-state: SUCCESS (2.271s)
Err	Starting subtest: basic-pci-d3-state Subtest basic-pci-d3-state: SUCCESS (2.271s)
Dmesg	<6> [274.180188] Console: switching to colour dummy device 80x25 <6> [274.180458] [IGT] kms_pm_rpm: executing <7> [274.192076] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [274.198916] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] <7> [274.198924] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [274.199463] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [274.199645] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [274.200217] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [274.200393] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [274.200413] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [274.200614] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [274.208439] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [274.208447] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [274.208572] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected <7> [274.208961] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2] <7> [274.208965] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [274.209167] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2] disconnected <7> [274.209576] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-3] <7> [274.209580] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [274.237403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [274.266404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [274.295404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [274.324404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [274.353404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [274.382404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [274.411404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [274.440404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [274.469404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [274.498406] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [274.527404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [274.556404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [274.585404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [274.614404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [274.643403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [274.672404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [274.701404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [274.730404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [274.759404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [274.788404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [274.817403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [274.846404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [274.875403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [274.904405] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [274.933404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [274.962404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [274.991404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [275.020404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [275.049403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [275.078404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [275.107403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [275.136404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [275.136543] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110 <7> [275.136557] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-3] disconnected <7> [275.136962] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-4] <7> [275.136966] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [275.137165] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-4] disconnected <7> [275.137562] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-5] <7> [275.137566] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [275.137786] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-5] disconnected <7> [275.138278] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1] <7> [275.138282] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [275.143602] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [275.143616] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [275.145146] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [275.149601] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [275.149610] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [275.151138] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [275.160177] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel <7> [275.163186] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [275.164759] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [275.166349] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [275.166456] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [275.166546] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [275.166635] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [275.188437] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [275.188444] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [275.188447] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [275.188449] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [275.188460] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [275.188582] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [275.190187] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [275.190286] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [275.192041] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1] probed modes : <7> [275.192044] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 533250 3840 3888 3920 4000 2160 2214 2219 2222 0x48 0x9 <7> [275.192048] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 266640 3840 3848 3992 4000 2160 2214 2219 2222 0x40 0x9 <7> [275.192050] [drm:drm_mode_debug_printmodeline] Modeline "2560x1440": 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x40 0x9 <7> [275.192052] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [275.192054] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [275.192056] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [275.192058] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [275.192060] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [275.192062] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 <7> [275.192064] [drm:drm_mode_debug_printmodeline] Modeline "1152x864": 60 81768 1152 1216 1336 1520 864 867 871 897 0x0 0x6 <7> [275.192066] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [275.192068] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [275.192069] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [275.192071] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [275.192073] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [275.192075] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa <7> [275.192077] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa <7> [275.192079] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [275.192081] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [275.192083] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [275.192108] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] <7> [275.192112] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [275.192597] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [275.192692] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [275.193106] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [275.193193] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [275.193196] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [275.193278] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [275.201075] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [275.201078] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [275.201174] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected <7> [275.201189] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2] <7> [275.201193] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [275.201419] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2] disconnected <7> [275.201444] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-3] <7> [275.201447] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [275.230404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [275.259404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [275.288403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [275.317404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [275.346404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [275.375403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [275.404404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [275.433404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [275.462469] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [275.491403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [275.520403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [275.549403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [275.578404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [275.607404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [275.636403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [275.665403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [275.694404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [275.723404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [275.752403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [275.781404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [275.810404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [275.839404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [275.868403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [275.897403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [275.926404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [275.955404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [275.984404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [276.013403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [276.042404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [276.071404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [276.100404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [276.129403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [276.129563] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110 <7> [276.129580] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-3] disconnected <7> [276.129611] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-4] <7> [276.129615] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [276.129845] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-4] disconnected <7> [276.129859] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-5] <7> [276.129863] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [276.130056] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-5] disconnected <7> [276.130082] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1] <7> [276.130086] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [276.135892] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [276.135915] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [276.137453] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [276.142251] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [276.142266] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [276.143882] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [276.152966] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel <7> [276.155930] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [276.157432] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [276.159039] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [276.159141] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [276.159239] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [276.159334] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [276.181186] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [276.181193] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [276.181196] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [276.181198] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [276.181208] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [276.181331] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [276.183025] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [276.183128] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [276.184877] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1] probed modes : <7> [276.184880] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 533250 3840 3888 3920 4000 2160 2214 2219 2222 0x48 0x9 <7> [276.184884] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 266640 3840 3848 3992 4000 2160 2214 2219 2222 0x40 0x9 <7> [276.184886] [drm:drm_mode_debug_printmodeline] Modeline "2560x1440": 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x40 0x9 <7> [276.184888] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [276.184890] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [276.184892] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [276.184894] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [276.184896] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [276.184898] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 <7> [276.184900] [drm:drm_mode_debug_printmodeline] Modeline "1152x864": 60 81768 1152 1216 1336 1520 864 867 871 897 0x0 0x6 <7> [276.184902] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [276.184904] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [276.184906] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [276.184908] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [276.184910] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [276.184912] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa <7> [276.184913] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa <7> [276.184915] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [276.184917] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [276.184919] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [276.184995] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] <7> [276.184999] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [276.185489] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [276.185628] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [276.186074] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [276.186233] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [276.186237] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [276.186359] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [276.194415] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [276.194421] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [276.194541] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected <7> [276.194610] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2] <7> [276.194614] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [276.194818] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2] disconnected <7> [276.194875] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-3] <7> [276.194878] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [276.223405] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [276.252403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [276.281403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [276.310706] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [276.339403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [276.368403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [276.397403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [276.426404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [276.455404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [276.484404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [276.513403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [276.542403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [276.571404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [276.600403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [276.629403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [276.658404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [276.687404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [276.716403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [276.745404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [276.774403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [276.803404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [276.832403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [276.861403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [276.890403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [276.919405] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [276.948403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [276.977404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [277.006403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [277.035404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [277.064403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [277.093403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [277.122404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [277.122545] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110 <7> [277.122559] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-3] disconnected <7> [277.122643] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-4] <7> [277.122647] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [277.122870] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-4] disconnected <7> [277.122931] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-5] <7> [277.122935] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [277.123129] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-5] disconnected <7> [277.123334] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:293] <7> [277.236743] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) <7> [278.132854] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) <7> [278.132978] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) <7> [278.133019] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_USBC2 <7> [278.133867] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [278.134606] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port E/TC#2: TC port mode reset (legacy -> disconnected) <7> [278.150978] [drm:drm_mode_setcrtc] [CRTC:80:pipe A] <7> [278.151289] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [278.152017] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [278.152636] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [278.153197] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [278.153770] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7766017/8388608 link 517734/524288, found tu 0, data 0/0 link 0/0) <7> [278.154305] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in output_types (expected 0x00000080, found 0x00000000) <7> [278.154887] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [278.155454] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3840, found 0) <7> [278.155807] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 4000, found 0) <7> [278.155911] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3840, found 0) <7> [278.156014] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 4000, found 0) <7> [278.156123] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3888, found 0) <7> [278.156233] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3920, found 0) <7> [278.156343] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 2160, found 0) <7> [278.156461] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 2160, found 0) <7> [278.156571] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 2214, found 0) <7> [278.156685] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 2219, found 0) <7> [278.156800] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 2222, found 0) <7> [278.156910] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 2222, found 0) <7> [278.157016] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3840, found 0) <7> [278.157125] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 4000, found 0) <7> [278.157231] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3840, found 0) <7> [278.157336] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 4000, found 0) <7> [278.157491] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3888, found 0) <7> [278.157602] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3920, found 0) <7> [278.157712] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 2160, found 0) <7> [278.157822] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 2160, found 0) <7> [278.157930] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 2214, found 0) <7> [278.158040] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 2219, found 0) <7> [278.158146] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 2222, found 0) <7> [278.158254] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 2222, found 0) <7> [278.158358] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [278.158473] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0) <7> [278.158585] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [278.158689] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [278.158801] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0) <7> [278.158912] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 533250, found 0) <7> [278.159026] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 533250, found 0) <7> [278.159138] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [278.159246] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [278.159349] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:80:pipe A] releasing DPLL 0 <7> [278.159517] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no <7> [278.159621] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [278.159746] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 4027) -> ( 0 - 0), size 4027 -> 0 <7> [278.159852] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb (4027 - 4096) -> ( 0 - 0), size 69 -> 0 <7> [278.159950] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [278.160047] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [278.160148] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [278.160249] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [278.160349] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 0 num active planes 0 <7> [278.160471] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10441 required 0 <7> [278.160587] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15946 required 0 <7> [278.160693] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 17848 required 0 <7> [278.160803] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 18818 required 0 <7> [278.160905] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 0 <7> [278.161010] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 51200 required 0 <7> [278.161121] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 0 <7> [278.161247] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change <7> [278.161360] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 179200 kHz, actual 179200 kHz <7> [278.161482] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [278.161599] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: no [modeset] <7> [278.161705] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no <7> [278.161820] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7> [278.161926] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7> [278.162030] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7> [278.162133] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7> [278.162241] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7> [278.162401] i915 0000:00:02.0: [drm:intel_audio_codec_disable [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B] Disable audio codec on [CRTC:80:pipe A] <7> [278.184847] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [278.198632] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [278.198761] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [278.201387] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [278.210159] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [278.220482] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [278.220994] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:80:pipe A] <7> [278.221174] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 <7> [278.221334] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [278.221511] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:31:plane 1A] <7> [278.221649] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 179200 kHz, VCO 537600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [278.221864] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] aud_ts_cdclk set to M=60, N=448 <7> [278.222038] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI B/PHY B] <7> [278.222194] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:237:DP-MST A] <7> [278.222326] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:238:DP-MST B] <7> [278.222468] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:239:DP-MST C] <7> [278.222588] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:240:DP-MST D] <7> [278.222701] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:254:DDI TC1/PHY TC1] <7> [278.222805] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:256:DP-MST A] <7> [278.222924] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:257:DP-MST B] <7> [278.223027] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:258:DP-MST C] <7> [278.223130] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:259:DP-MST D] <7> [278.223227] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:263:DDI TC2/PHY TC2] <7> [278.223322] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST A] <7> [278.223475] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST B] <7> [278.223652] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST C] <7> [278.223831] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:268:DP-MST D] <7> [278.223946] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:272:DDI TC3/PHY TC3] <7> [278.224050] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:274:DP-MST A] <7> [278.224149] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DP-MST B] <7> [278.224246] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:276:DP-MST C] <7> [278.224341] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST D] <7> [278.224454] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:281:DDI TC4/PHY TC4] <7> [278.224551] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:283:DP-MST A] <7> [278.224660] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DP-MST B] <7> [278.224768] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:285:DP-MST C] <7> [278.224875] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:286:DP-MST D] <7> [278.224976] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:DP-1] <7> [278.225206] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7> [278.225378] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [278.225574] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_A <7> [278.225720] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7> [278.225952] [drm:drm_mode_setcrtc] [CRTC:131:pipe B] <7> [278.226124] [drm:drm_mode_setcrtc] [CRTC:182:pipe C] <7> [278.226220] [drm:drm_mode_setcrtc] [CRTC:233:pipe D] <7> [278.243564] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [278.243739] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [278.243868] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [278.244312] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [278.244713] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [278.245658] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [278.246574] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [278.246909] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [278.247270] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [278.247577] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [278.247713] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [278.247977] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [278.328270] [IGT] kms_pm_rpm: starting subtest basic-pci-d3-state <7> [278.361413] [drm:drm_mode_setcrtc] [CRTC:80:pipe A] <7> [278.373849] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [278.373962] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [278.374110] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [278.374275] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [278.374535] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [278.374803] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [278.375059] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [278.375550] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [278.375759] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [278.376250] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [278.376545] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [278.378889] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [278.379066] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [278.382859] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [278.383749] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [278.383901] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [278.384026] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [278.384305] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [278.384681] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [278.384906] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [278.385154] [drm:drm_mode_setcrtc] [CRTC:131:pipe B] <7> [278.390526] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [278.390560] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [278.392324] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [278.397493] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [278.397514] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [278.399198] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [278.409236] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel <7> [278.412447] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [278.414119] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [278.415759] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [278.415852] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [278.415942] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [278.416034] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [278.436439] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [278.436447] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [278.436450] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [278.436453] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [278.436466] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [278.436588] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [278.438205] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [278.438306] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [278.439929] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [278.440391] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [278.440503] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [278.440903] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [278.440999] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [278.441002] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [278.441085] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [278.448897] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [278.448900] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [278.449016] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [278.449181] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [278.449377] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [278.449506] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [278.449620] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [278.450111] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) <7> [278.450282] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [278.450665] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [278.450766] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [278.451159] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [278.451334] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_USBC2 <7> [278.451528] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) <7> [278.480406] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [278.509404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [278.538404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [278.567403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [278.596404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [278.625404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [278.654403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [278.683404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [278.712404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [278.741404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [278.770404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [278.799403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [278.828404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [278.857404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [278.886403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [278.915404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [278.944404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [278.973404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [279.002404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [279.031404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [279.060405] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [279.089404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [279.118404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [279.147404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [279.176404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [279.205404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [279.234404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [279.263403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [279.292405] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [279.321404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [279.350403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [279.379403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [279.379547] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110 <7> [279.379587] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [279.379788] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) <7> [279.379950] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [279.380142] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) <7> [279.380426] [drm:drm_mode_setcrtc] [CRTC:182:pipe C] <7> [279.380541] [drm:drm_mode_setcrtc] [CRTC:233:pipe D] <7> [279.477735] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) <7> [280.436865] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) <7> [280.437017] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) <7> [280.437079] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_USBC2 <7> [280.437970] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [280.438668] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [280.439225] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [280.439814] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [280.440806] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [280.442488] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [280.443424] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [280.443604] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port E/TC#2: TC port mode reset (legacy -> disconnected) <7> [280.444033] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [280.444310] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [280.444693] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [280.444891] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [280.444999] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [280.445135] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [280.484906] [drm:drm_mode_setcrtc] [CRTC:80:pipe A] <7> [280.485057] [drm:drm_mode_setcrtc] [CONNECTOR:236:DP-1] <7> [280.485278] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:236:DP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [280.486040] i915 0000:00:02.0: [drm:intel_dp_compute_config_link_bpp_limits [i915]] [ENCODER:235:DDI B/PHY B][CRTC:80:pipe A] DP link limits: pixel clock 533250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 max link_bpp 30.0000 <7> [280.486583] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 link rate required 1999688 available 2160000 <7> [280.487053] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] PSR disabled by flag <7> [280.487547] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [280.488101] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:235:DDI B/PHY B] [CRTC:80:pipe A] <7> [280.488618] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [280.489166] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [280.489729] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [280.489857] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [280.489969] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 7766017/8388608 link 517734/524288) <7> [280.490083] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000080) <7> [280.490200] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [280.490311] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3840) <7> [280.490422] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 4000) <7> [280.490528] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3840) <7> [280.490630] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 4000) <7> [280.490732] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3888) <7> [280.490834] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3920) <7> [280.490938] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 2160) <7> [280.491045] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 2160) <7> [280.491150] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 2214) <7> [280.491253] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 2219) <7> [280.491354] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 2222) <7> [280.491469] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 2222) <7> [280.491576] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3840) <7> [280.491685] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 4000) <7> [280.491799] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3840) <7> [280.491912] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 4000) <7> [280.492017] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3888) <7> [280.492120] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3920) <7> [280.492221] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 2160) <7> [280.492325] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 2160) <7> [280.492437] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 2214) <7> [280.492541] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 2219) <7> [280.492646] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 2222) <7> [280.492754] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 2222) <7> [280.492861] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [280.492970] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1) <7> [280.493082] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [280.493196] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [280.493308] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30) <7> [280.493438] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 533250) <7> [280.493549] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 533250) <7> [280.493657] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [280.493767] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [280.493910] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [280.494016] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [280.494146] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4027), size 0 -> 4027 <7> [280.494245] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb ( 0 - 0) -> (4027 - 4096), size 0 -> 69 <7> [280.494338] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [280.494438] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0 <7> [280.494530] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201 <7> [280.494624] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207 <7> [280.494721] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 2133000 num active planes 1 <7> [280.494832] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10441 required 2240 <7> [280.494940] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15946 required 2240 <7> [280.495044] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 17848 required 2240 <7> [280.495148] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 18818 required 2240 <7> [280.495261] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 2240 <7> [280.495375] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 51200 required 2240 <7> [280.495500] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 2240 <7> [280.495622] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (266625 kHz) > [CRTC:80:pipe A] min cdclk (0 kHz) <7> [280.495737] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (41661 kHz) > old min cdclk (0 kHz) <7> [280.495849] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change <7> [280.495958] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 307200 kHz, actual 307200 kHz <7> [280.496064] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [280.496170] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:80:pipe A] allocated DPLL 0 <7> [280.496275] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:80:pipe A] reserving DPLL 0 <7> [280.496381] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [modeset] <7> [280.496496] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB <7> [280.496602] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7> [280.496714] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [280.496827] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [280.496940] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7> [280.497048] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [280.497156] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7766017, data_n: 8388608, link_m: 517734, link_n: 524288, tu: 64 <7> [280.497266] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [280.497374] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [280.497488] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [280.497590] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: disabled, psr2: disabled, panel replay: disabled, selective fetch: disabled <7> [280.497697] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7> [280.497802] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 1, infoframes: 0, infoframes enabled: 0x0 <7> [280.497906] ELD: 10 00 07 00 69 14 00 01 00 00 00 00 00 00 00 00 <7> [280.497907] ELD: 1e 6d 07 77 4c 47 20 48 44 52 20 34 4b 09 07 07 <7> [280.497909] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 2221, vmax: 3332, pipeline full: 0, guardband: 62 flipline: 2222, vmin vblank: 2160, vmax vblank: 3270 <7> [280.498011] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3840x2160": 60 533250 3840 3888 3920 4000 2160 2214 2219 2222 0x48 0x9 <7> [280.498113] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3840x2160": 60 533250 3840 3888 3920 4000 2160 2214 2219 2222 0x48 0x9 <7> [280.498220] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=533250, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2160 vb=2160-2222 vs=2214-2219 vt=2222, flags=0x9 <7> [280.498328] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3840x2160": 60 533250 3840 3888 3920 4000 2160 2214 2219 2222 0x40 0x9 <7> [280.498444] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=533250, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2160 vb=2160-2222 vs=2214-2219 vt=2222, flags=0x9 <7> [280.498553] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3840x2160+0+0, pixel rate 533250 <7> [280.498660] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 61, ips linetime: 0 <7> [280.498767] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [280.498872] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [280.498979] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [280.499086] i915 0000:00:02.0: [drm:icl_dump_hw_state [i915]] dpll_hw_state: cfgcr0: 0xe001a5, cfgcr1: 0x48, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [280.499196] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [280.499314] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [280.499438] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [280.499551] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [280.499662] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [280.499772] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [280.499881] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [280.499991] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [280.500105] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [280.500218] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [280.500329] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [280.500446] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [280.500556] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:293] 3840x2160 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [280.500668] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [280.500778] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3840.000000x2160.000000+0.000000+0.000000 dst: 3840x2160+0+0 <7> [280.500893] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7> [280.501008] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7> [280.501120] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7> [280.501231] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7> [280.501339] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7> [280.513774] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [280.513845] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [280.513964] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [280.514100] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [280.514304] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [280.514483] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [280.514635] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [280.514800] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [280.514909] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [280.515094] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [280.515270] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [280.516910] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [280.517016] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [280.520088] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [280.520729] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [280.521804] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [280.523126] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [280.523419] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [280.523631] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7> [280.523768] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [280.524084] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] aud_ts_cdclk set to M=60, N=768 <7> [280.524190] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI B/PHY B] <7> [280.524288] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:237:DP-MST A] <7> [280.524382] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:238:DP-MST B] <7> [280.524487] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:239:DP-MST C] <7> [280.524584] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:240:DP-MST D] <7> [280.524680] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:254:DDI TC1/PHY TC1] <7> [280.524776] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:256:DP-MST A] <7> [280.524871] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:257:DP-MST B] <7> [280.524965] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:258:DP-MST C] <7> [280.525059] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:259:DP-MST D] <7> [280.525158] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:263:DDI TC2/PHY TC2] <7> [280.525253] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST A] <7> [280.525344] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST B] <7> [280.525460] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST C] <7> [280.525555] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:268:DP-MST D] <7> [280.525649] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:272:DDI TC3/PHY TC3] <7> [280.525742] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:274:DP-MST A] <7> [280.525833] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DP-MST B] <7> [280.525923] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:276:DP-MST C] <7> [280.526011] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST D] <7> [280.526099] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:281:DDI TC4/PHY TC4] <7> [280.526185] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:283:DP-MST A] <7> [280.526275] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DP-MST B] <7> [280.526371] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:285:DP-MST C] <7> [280.526482] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:286:DP-MST D] <7> [280.526659] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7> [280.526841] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [280.526950] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:80:pipe A] <7> [280.527050] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 <7> [280.527201] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [280.533381] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [280.533404] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [280.534941] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [280.539348] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [280.539359] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [280.539374] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] Using LINK_BW_SET value 14 <7> [280.541015] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [280.541177] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] Using DP training pattern TPS1 <7> [280.545125] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] 8b/10b, lanes: 4, vswing request: 1/1/1/1, pre-emphasis request: 0/0/0/0 <7> [280.545223] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] 8b/10b, lanes: 4, vswing levels: 1/1/1/1, pre-emphasis levels: 0/0/0/0 <7> [280.549189] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 0/0/0/0 <7> [280.549288] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] 8b/10b, lanes: 4, vswing levels: 2/2/2/2, pre-emphasis levels: 0/0/0/0 <7> [280.553190] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] Clock recovery OK <7> [280.553286] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] Using DP training pattern TPS3 <7> [280.557930] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] 8b/10b, lanes: 4, vswing request: 3/3/3/3, pre-emphasis request: 0/0/0/0 <7> [280.558020] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] 8b/10b, lanes: 4, vswing levels: 3(max)/3(max)/3(max)/3(max), pre-emphasis levels: 0/0/0/0 <7> [280.562375] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] Channel EQ done. DP Training successful <7> [280.562483] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [280.563477] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [280.563682] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 34283520 bytes of contiguous stolen space for FBC, limit: 1 <7> [280.563792] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:31:plane 1A] <7> [280.580781] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7> [280.581091] i915 0000:00:02.0: [drm:intel_audio_codec_enable [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B] Enable audio codec on [CRTC:80:pipe A], 32 bytes ELD <7> [280.597457] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:DP-1] <7> [280.597843] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <6> [280.599375] [IGT] kms_pm_rpm: finished subtest basic-pci-d3-state, SUCCESS <7> [280.599891] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [280.600482] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:293] from all active usage due to RMFB ioctl <7> [280.601141] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [280.601862] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [280.606328] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [280.606343] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [280.608321] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [280.614170] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [280.614210] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80 <7> [280.615087] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [280.616457] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [280.627938] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel <7> [280.631265] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [280.633295] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7> [280.635164] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes <7> [280.635338] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [280.635538] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [280.635713] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [280.657958] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz <7> [280.657967] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [280.657970] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K <7> [280.657972] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1 <7> [280.657983] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes <7> [280.658084] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [280.659697] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [280.659794] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [280.661540] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:31:plane 1A] because [FB:293] is removed <7> [280.661635] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 4027) -> ( 0 - 0), size 4027 -> 0 <7> [280.661750] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [280.661846] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [280.661938] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [280.662030] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [280.662125] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 0 num active planes 0 <7> [280.662232] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10441 required 0 <7> [280.662334] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15946 required 0 <7> [280.662445] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 17848 required 0 <7> [280.662553] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 18818 required 0 <7> [280.662660] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 0 <7> [280.662765] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 51200 required 0 <7> [280.662872] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 0 <7> [280.663912] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:31:plane 1A] <7> [280.681287] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [280.681821] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [280.681931] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [280.682319] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [280.682441] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [280.682446] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [280.682552] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [280.690312] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [280.690314] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [280.690445] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [280.690665] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) <7> [280.691007] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4027), size 0 -> 4027 <7> [280.691138] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [280.691243] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0 <7> [280.691340] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201 <7> [280.691456] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207 <7> [280.691551] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 2133000 num active planes 1 <7> [280.691656] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10441 required 2240 <7> [280.691767] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15946 required 2240 <7> [280.691877] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 17848 required 2240 <7> [280.691985] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 18818 required 2240 <7> [280.692090] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 2240 <7> [280.692192] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 51200 required 2240 <7> [280.692289] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 2240 <7> [280.692628] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 34283520 bytes of contiguous stolen space for FBC, limit: 1 <7> [280.692727] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:31:plane 1A] <7> [280.697568] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [280.697821] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [280.697955] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_USBC2 <7> [280.698083] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) <6> [280.702015] [IGT] kms_pm_rpm: exiting, ret=0 <7> [280.726403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [280.755403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [280.784404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [280.813404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [280.842403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [280.871404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [280.900404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [280.929405] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [280.958404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [280.987404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [281.016403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [281.045404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [281.074404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [281.102403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [281.131404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [281.160403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [281.189405] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [281.218403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [281.247403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [281.276403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [281.305405] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [281.334403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [281.363403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [281.392403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [281.421404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [281.450403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [281.479403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [281.507404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [281.536404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [281.565404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [281.594404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [281.623403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [281.623546] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110 <7> [281.623565] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4] <7> [281.623765] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) <6> [281.630972] Console: switching to colour frame buffer device 480x135 <7> [281.631002] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5] <7> [281.631279] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt)

<7> [274.198916] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]

<7> [274.198924] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [274.199463] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [274.199645] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [274.200217] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [274.200393] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [274.200413] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [274.200614] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [274.208439] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [274.208447] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [274.208572] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected

<7> [274.208961] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2]

<7> [274.208965] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [274.209167] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2] disconnected

<7> [274.209576] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-3]

<7> [274.209580] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [274.237403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [274.266404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [274.295404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [274.324404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [274.353404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [274.382404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [274.411404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [274.440404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [274.469404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [274.498406] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [274.527404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [274.556404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [274.585404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [274.614404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [274.643403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [274.672404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [274.701404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [274.730404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [274.759404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [274.788404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [274.817403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [274.846404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [274.875403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [274.904405] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [274.933404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [274.962404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [274.991404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [275.020404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [275.049403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [275.078404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [275.107403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [275.136404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [275.136543] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110

<7> [275.136557] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-3] disconnected

<7> [275.136962] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-4]

<7> [275.136966] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [275.137165] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-4] disconnected

<7> [275.137562] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-5]

<7> [275.137566] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [275.137786] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-5] disconnected

<7> [275.138278] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1]

<7> [275.138282] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [275.143602] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [275.143616] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [275.145146] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [275.149601] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [275.149610] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [275.151138] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [275.160177] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel

<7> [275.163186] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [275.164759] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [275.166349] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [275.166456] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [275.166546] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [275.166635] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [275.188437] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [275.188444] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [275.188447] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [275.188449] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [275.188460] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [275.188582] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [275.190187] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [275.190286] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [275.192041] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1] probed modes :

<7> [275.192044] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 533250 3840 3888 3920 4000 2160 2214 2219 2222 0x48 0x9

<7> [275.192048] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 266640 3840 3848 3992 4000 2160 2214 2219 2222 0x40 0x9

<7> [275.192050] [drm:drm_mode_debug_printmodeline] Modeline "2560x1440": 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x40 0x9

<7> [275.192052] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [275.192054] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [275.192056] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [275.192058] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [275.192060] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [275.192062] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6

<7> [275.192064] [drm:drm_mode_debug_printmodeline] Modeline "1152x864": 60 81768 1152 1216 1336 1520 864 867 871 897 0x0 0x6

<7> [275.192066] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [275.192068] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [275.192069] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [275.192071] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [275.192073] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [275.192075] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa

<7> [275.192077] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa

<7> [275.192079] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [275.192081] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [275.192083] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [275.192108] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]

<7> [275.192112] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [275.192597] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [275.192692] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [275.193106] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [275.193193] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [275.193196] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [275.193278] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [275.201075] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [275.201078] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [275.201174] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected

<7> [275.201189] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2]

<7> [275.201193] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [275.201419] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2] disconnected

<7> [275.201444] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-3]

<7> [275.201447] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [275.230404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [275.259404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [275.288403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [275.317404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [275.346404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [275.375403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [275.404404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [275.433404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [275.462469] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [275.491403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [275.520403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [275.549403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [275.578404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [275.607404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [275.636403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [275.665403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [275.694404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [275.723404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [275.752403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [275.781404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [275.810404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [275.839404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [275.868403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [275.897403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [275.926404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [275.955404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [275.984404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [276.013403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [276.042404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [276.071404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [276.100404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [276.129403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [276.129563] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110

<7> [276.129580] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-3] disconnected

<7> [276.129611] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-4]

<7> [276.129615] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [276.129845] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-4] disconnected

<7> [276.129859] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-5]

<7> [276.129863] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [276.130056] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-5] disconnected

<7> [276.130082] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1]

<7> [276.130086] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [276.135892] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [276.135915] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [276.137453] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [276.142251] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [276.142266] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [276.143882] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [276.152966] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel

<7> [276.155930] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [276.157432] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [276.159039] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [276.159141] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [276.159239] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [276.159334] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [276.181186] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [276.181193] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [276.181196] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [276.181198] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [276.181208] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [276.181331] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [276.183025] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [276.183128] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [276.184877] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1] probed modes :

<7> [276.184880] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 533250 3840 3888 3920 4000 2160 2214 2219 2222 0x48 0x9

<7> [276.184884] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 266640 3840 3848 3992 4000 2160 2214 2219 2222 0x40 0x9

<7> [276.184886] [drm:drm_mode_debug_printmodeline] Modeline "2560x1440": 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x40 0x9

<7> [276.184888] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [276.184890] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [276.184892] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [276.184894] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [276.184896] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [276.184898] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6

<7> [276.184900] [drm:drm_mode_debug_printmodeline] Modeline "1152x864": 60 81768 1152 1216 1336 1520 864 867 871 897 0x0 0x6

<7> [276.184902] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [276.184904] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [276.184906] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [276.184908] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [276.184910] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [276.184912] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa

<7> [276.184913] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa

<7> [276.184915] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [276.184917] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [276.184919] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [276.184995] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]

<7> [276.184999] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [276.185489] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [276.185628] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [276.186074] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [276.186233] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [276.186237] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [276.186359] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [276.194415] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [276.194421] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [276.194541] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected

<7> [276.194610] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2]

<7> [276.194614] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [276.194818] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2] disconnected

<7> [276.194875] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-3]

<7> [276.194878] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [276.223405] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [276.252403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [276.281403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [276.310706] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [276.339403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [276.368403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [276.397403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [276.426404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [276.455404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [276.484404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [276.513403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [276.542403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [276.571404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [276.600403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [276.629403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [276.658404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [276.687404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [276.716403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [276.745404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [276.774403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [276.803404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [276.832403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [276.861403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [276.890403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [276.919405] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [276.948403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [276.977404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [277.006403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [277.035404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [277.064403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [277.093403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [277.122404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [277.122545] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110

<7> [277.122559] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-3] disconnected

<7> [277.122643] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-4]

<7> [277.122647] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [277.122870] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-4] disconnected

<7> [277.122931] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-5]

<7> [277.122935] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [277.123129] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-5] disconnected

<7> [277.236743] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)

<7> [278.132854] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected)

<7> [278.132978] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)

<7> [278.133019] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_USBC2

<7> [278.133867] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [278.134606] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port E/TC#2: TC port mode reset (legacy -> disconnected)

<7> [278.151289] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [278.152017] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [278.152636] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [278.153197] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [278.153770] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7766017/8388608 link 517734/524288, found tu 0, data 0/0 link 0/0)

<7> [278.154305] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in output_types (expected 0x00000080, found 0x00000000)

<7> [278.154887] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [278.155454] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3840, found 0)

<7> [278.155807] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 4000, found 0)

<7> [278.155911] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3840, found 0)

<7> [278.156014] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 4000, found 0)

<7> [278.156123] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3888, found 0)

<7> [278.156233] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3920, found 0)

<7> [278.156343] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 2160, found 0)

<7> [278.156461] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 2160, found 0)

<7> [278.156571] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 2214, found 0)

<7> [278.156685] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 2219, found 0)

<7> [278.156800] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 2222, found 0)

<7> [278.156910] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 2222, found 0)

<7> [278.157016] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3840, found 0)

<7> [278.157125] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 4000, found 0)

<7> [278.157231] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3840, found 0)

<7> [278.157336] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 4000, found 0)

<7> [278.157491] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3888, found 0)

<7> [278.157602] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3920, found 0)

<7> [278.157712] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 2160, found 0)

<7> [278.157822] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 2160, found 0)

<7> [278.157930] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 2214, found 0)

<7> [278.158040] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 2219, found 0)

<7> [278.158146] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 2222, found 0)

<7> [278.158254] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 2222, found 0)

<7> [278.158358] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [278.158473] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)

<7> [278.158585] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [278.158689] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [278.158801] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)

<7> [278.158912] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 533250, found 0)

<7> [278.159026] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 533250, found 0)

<7> [278.159138] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [278.159246] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [278.159349] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:80:pipe A] releasing DPLL 0

<7> [278.159517] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no

<7> [278.159621] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [278.159746] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 4027) -> ( 0 - 0), size 4027 -> 0

<7> [278.159852] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb (4027 - 4096) -> ( 0 - 0), size 69 -> 0

<7> [278.159950] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [278.160047] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [278.160148] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [278.160249] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [278.160349] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 0 num active planes 0

<7> [278.160471] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10441 required 0

<7> [278.160587] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15946 required 0

<7> [278.160693] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 17848 required 0

<7> [278.160803] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 18818 required 0

<7> [278.160905] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 0

<7> [278.161010] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 51200 required 0

<7> [278.161121] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 0

<7> [278.161247] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change

<7> [278.161360] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 179200 kHz, actual 179200 kHz

<7> [278.161482] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [278.161599] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: no [modeset]

<7> [278.161705] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no

<7> [278.161820] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no

<7> [278.161926] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no

<7> [278.162030] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no

<7> [278.162133] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no

<7> [278.162241] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no

<7> [278.162401] i915 0000:00:02.0: [drm:intel_audio_codec_disable [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B] Disable audio codec on [CRTC:80:pipe A]

<7> [278.184847] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [278.198632] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [278.198761] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [278.201387] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [278.210159] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [278.220482] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [278.220994] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:80:pipe A]

<7> [278.221174] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0

<7> [278.221334] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [278.221511] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:31:plane 1A]

<7> [278.221649] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 179200 kHz, VCO 537600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [278.221864] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] aud_ts_cdclk set to M=60, N=448

<7> [278.222038] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI B/PHY B]

<7> [278.222194] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:237:DP-MST A]

<7> [278.222326] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:238:DP-MST B]

<7> [278.222468] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:239:DP-MST C]

<7> [278.222588] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:240:DP-MST D]

<7> [278.222701] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:254:DDI TC1/PHY TC1]

<7> [278.222805] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:256:DP-MST A]

<7> [278.222924] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:257:DP-MST B]

<7> [278.223027] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:258:DP-MST C]

<7> [278.223130] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:259:DP-MST D]

<7> [278.223227] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:263:DDI TC2/PHY TC2]

<7> [278.223322] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST A]

<7> [278.223475] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST B]

<7> [278.223652] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST C]

<7> [278.223831] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:268:DP-MST D]

<7> [278.223946] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:272:DDI TC3/PHY TC3]

<7> [278.224050] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:274:DP-MST A]

<7> [278.224149] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DP-MST B]

<7> [278.224246] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:276:DP-MST C]

<7> [278.224341] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST D]

<7> [278.224454] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:281:DDI TC4/PHY TC4]

<7> [278.224551] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:283:DP-MST A]

<7> [278.224660] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DP-MST B]

<7> [278.224768] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:285:DP-MST C]

<7> [278.224875] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:286:DP-MST D]

<7> [278.224976] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:DP-1]

<7> [278.225206] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf

<7> [278.225378] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [278.225574] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_A

<7> [278.225720] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A]

<7> [278.243564] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [278.243739] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [278.243868] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [278.244312] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [278.244713] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [278.245658] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [278.246574] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [278.246909] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [278.247270] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [278.247577] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [278.247713] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [278.247977] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [278.328270] [IGT] kms_pm_rpm: starting subtest basic-pci-d3-state

<7> [278.373849] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [278.373962] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [278.374110] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [278.374275] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [278.374535] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [278.374803] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [278.375059] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [278.375550] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [278.375759] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [278.376250] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [278.376545] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [278.378889] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [278.379066] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [278.382859] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [278.383749] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [278.383901] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [278.384026] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [278.384305] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [278.384681] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [278.384906] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [278.390526] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [278.390560] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [278.392324] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [278.397493] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [278.397514] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [278.399198] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [278.409236] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel

<7> [278.412447] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [278.414119] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [278.415759] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [278.415852] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [278.415942] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [278.416034] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [278.436439] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [278.436447] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [278.436450] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [278.436453] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [278.436466] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [278.436588] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [278.438205] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [278.438306] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [278.439929] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [278.440391] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [278.440503] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [278.440903] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [278.440999] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [278.441002] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [278.441085] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [278.448897] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [278.448900] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [278.449016] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [278.449181] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [278.449377] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [278.449506] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [278.449620] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [278.450111] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)

<7> [278.450282] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [278.450665] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [278.450766] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [278.451159] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [278.451334] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_USBC2

<7> [278.451528] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy)

<7> [278.480406] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [278.509404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [278.538404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [278.567403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [278.596404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [278.625404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [278.654403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [278.683404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [278.712404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [278.741404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [278.770404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [278.799403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [278.828404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [278.857404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [278.886403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [278.915404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [278.944404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [278.973404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [279.002404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [279.031404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [279.060405] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [279.089404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [279.118404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [279.147404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [279.176404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [279.205404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [279.234404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [279.263403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [279.292405] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [279.321404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [279.350403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [279.379403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [279.379547] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110

<7> [279.379587] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [279.379788] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)

<7> [279.379950] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [279.380142] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt)

<7> [279.477735] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)

<7> [280.436865] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected)

<7> [280.437017] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)

<7> [280.437079] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_USBC2

<7> [280.437970] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [280.438668] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [280.439225] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [280.439814] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [280.440806] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [280.442488] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [280.443424] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [280.443604] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port E/TC#2: TC port mode reset (legacy -> disconnected)

<7> [280.444033] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [280.444310] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [280.444693] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [280.444891] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [280.444999] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [280.445135] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [280.485278] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:236:DP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [280.486040] i915 0000:00:02.0: [drm:intel_dp_compute_config_link_bpp_limits [i915]] [ENCODER:235:DDI B/PHY B][CRTC:80:pipe A] DP link limits: pixel clock 533250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 max link_bpp 30.0000

<7> [280.486583] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 link rate required 1999688 available 2160000

<7> [280.487053] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] PSR disabled by flag

<7> [280.487547] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [280.488101] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:235:DDI B/PHY B] [CRTC:80:pipe A]

<7> [280.488618] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [280.489166] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [280.489729] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [280.489857] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [280.489969] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 7766017/8388608 link 517734/524288)

<7> [280.490083] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000080)

<7> [280.490200] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [280.490311] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3840)

<7> [280.490422] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 4000)

<7> [280.490528] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3840)

<7> [280.490630] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 4000)

<7> [280.490732] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3888)

<7> [280.490834] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3920)

<7> [280.490938] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 2160)

<7> [280.491045] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 2160)

<7> [280.491150] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 2214)

<7> [280.491253] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 2219)

<7> [280.491354] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 2222)

<7> [280.491469] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 2222)

<7> [280.491576] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3840)

<7> [280.491685] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 4000)

<7> [280.491799] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3840)

<7> [280.491912] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 4000)

<7> [280.492017] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3888)

<7> [280.492120] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3920)

<7> [280.492221] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 2160)

<7> [280.492325] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 2160)

<7> [280.492437] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 2214)

<7> [280.492541] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 2219)

<7> [280.492646] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 2222)

<7> [280.492754] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 2222)

<7> [280.492861] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [280.492970] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)

<7> [280.493082] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [280.493196] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [280.493308] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)

<7> [280.493438] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 533250)

<7> [280.493549] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 533250)

<7> [280.493657] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [280.493767] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [280.493910] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [280.494016] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [280.494146] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4027), size 0 -> 4027

<7> [280.494245] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb ( 0 - 0) -> (4027 - 4096), size 0 -> 69

<7> [280.494338] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [280.494438] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0

<7> [280.494530] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201

<7> [280.494624] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207

<7> [280.494721] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 2133000 num active planes 1

<7> [280.494832] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10441 required 2240

<7> [280.494940] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15946 required 2240

<7> [280.495044] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 17848 required 2240

<7> [280.495148] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 18818 required 2240

<7> [280.495261] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 2240

<7> [280.495375] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 51200 required 2240

<7> [280.495500] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 2240

<7> [280.495622] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (266625 kHz) > [CRTC:80:pipe A] min cdclk (0 kHz)

<7> [280.495737] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (41661 kHz) > old min cdclk (0 kHz)

<7> [280.495849] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change

<7> [280.495958] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 307200 kHz, actual 307200 kHz

<7> [280.496064] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [280.496170] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:80:pipe A] allocated DPLL 0

<7> [280.496275] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:80:pipe A] reserving DPLL 0

<7> [280.496381] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [modeset]

<7> [280.496496] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB

<7> [280.496602] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0

<7> [280.496714] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [280.496827] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [280.496940] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0

<7> [280.497048] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [280.497156] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7766017, data_n: 8388608, link_m: 517734, link_n: 524288, tu: 64

<7> [280.497266] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [280.497374] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [280.497488] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [280.497590] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: disabled, psr2: disabled, panel replay: disabled, selective fetch: disabled

<7> [280.497697] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0

<7> [280.497802] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 1, infoframes: 0, infoframes enabled: 0x0

<7> [280.497906] ELD: 10 00 07 00 69 14 00 01 00 00 00 00 00 00 00 00

<7> [280.497907] ELD: 1e 6d 07 77 4c 47 20 48 44 52 20 34 4b 09 07 07

<7> [280.497909] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 2221, vmax: 3332, pipeline full: 0, guardband: 62 flipline: 2222, vmin vblank: 2160, vmax vblank: 3270

<7> [280.498011] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3840x2160": 60 533250 3840 3888 3920 4000 2160 2214 2219 2222 0x48 0x9

<7> [280.498113] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3840x2160": 60 533250 3840 3888 3920 4000 2160 2214 2219 2222 0x48 0x9

<7> [280.498220] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=533250, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2160 vb=2160-2222 vs=2214-2219 vt=2222, flags=0x9

<7> [280.498328] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3840x2160": 60 533250 3840 3888 3920 4000 2160 2214 2219 2222 0x40 0x9

<7> [280.498444] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=533250, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2160 vb=2160-2222 vs=2214-2219 vt=2222, flags=0x9

<7> [280.498553] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3840x2160+0+0, pixel rate 533250

<7> [280.498660] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 61, ips linetime: 0

<7> [280.498767] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [280.498872] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [280.498979] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [280.499086] i915 0000:00:02.0: [drm:icl_dump_hw_state [i915]] dpll_hw_state: cfgcr0: 0xe001a5, cfgcr1: 0x48, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [280.499196] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [280.499314] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [280.499438] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [280.499551] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [280.499662] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [280.499772] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [280.499881] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [280.499991] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [280.500105] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [280.500218] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [280.500329] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [280.500446] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [280.500556] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:293] 3840x2160 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [280.500668] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [280.500778] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3840.000000x2160.000000+0.000000+0.000000 dst: 3840x2160+0+0

<7> [280.500893] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no

<7> [280.501008] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no

<7> [280.501120] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no

<7> [280.501231] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no

<7> [280.501339] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no

<7> [280.513774] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [280.513845] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [280.513964] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [280.514100] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [280.514304] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [280.514483] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [280.514635] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [280.514800] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [280.514909] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [280.515094] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [280.515270] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [280.516910] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [280.517016] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [280.520088] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [280.520729] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [280.521804] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [280.523126] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [280.523419] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [280.523631] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A

<7> [280.523768] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [280.524084] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] aud_ts_cdclk set to M=60, N=768

<7> [280.524190] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI B/PHY B]

<7> [280.524288] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:237:DP-MST A]

<7> [280.524382] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:238:DP-MST B]

<7> [280.524487] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:239:DP-MST C]

<7> [280.524584] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:240:DP-MST D]

<7> [280.524680] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:254:DDI TC1/PHY TC1]

<7> [280.524776] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:256:DP-MST A]

<7> [280.524871] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:257:DP-MST B]

<7> [280.524965] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:258:DP-MST C]

<7> [280.525059] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:259:DP-MST D]

<7> [280.525158] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:263:DDI TC2/PHY TC2]

<7> [280.525253] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST A]

<7> [280.525344] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST B]

<7> [280.525460] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST C]

<7> [280.525555] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:268:DP-MST D]

<7> [280.525649] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:272:DDI TC3/PHY TC3]

<7> [280.525742] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:274:DP-MST A]

<7> [280.525833] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DP-MST B]

<7> [280.525923] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:276:DP-MST C]

<7> [280.526011] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST D]

<7> [280.526099] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:281:DDI TC4/PHY TC4]

<7> [280.526185] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:283:DP-MST A]

<7> [280.526275] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DP-MST B]

<7> [280.526371] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:285:DP-MST C]

<7> [280.526482] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:286:DP-MST D]

<7> [280.526659] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf

<7> [280.526841] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [280.526950] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:80:pipe A]

<7> [280.527050] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0

<7> [280.527201] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [280.533381] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [280.533404] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [280.534941] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [280.539348] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [280.539359] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [280.539374] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] Using LINK_BW_SET value 14

<7> [280.541015] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [280.541177] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] Using DP training pattern TPS1

<7> [280.545125] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] 8b/10b, lanes: 4, vswing request: 1/1/1/1, pre-emphasis request: 0/0/0/0

<7> [280.545223] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] 8b/10b, lanes: 4, vswing levels: 1/1/1/1, pre-emphasis levels: 0/0/0/0

<7> [280.549189] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 0/0/0/0

<7> [280.549288] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] 8b/10b, lanes: 4, vswing levels: 2/2/2/2, pre-emphasis levels: 0/0/0/0

<7> [280.553190] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] Clock recovery OK

<7> [280.553286] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] Using DP training pattern TPS3

<7> [280.557930] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] 8b/10b, lanes: 4, vswing request: 3/3/3/3, pre-emphasis request: 0/0/0/0

<7> [280.558020] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] 8b/10b, lanes: 4, vswing levels: 3(max)/3(max)/3(max)/3(max), pre-emphasis levels: 0/0/0/0

<7> [280.562375] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] Channel EQ done. DP Training successful

<7> [280.562483] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [280.563477] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [280.563682] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 34283520 bytes of contiguous stolen space for FBC, limit: 1

<7> [280.563792] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:31:plane 1A]

<7> [280.580781] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf

<7> [280.581091] i915 0000:00:02.0: [drm:intel_audio_codec_enable [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B] Enable audio codec on [CRTC:80:pipe A], 32 bytes ELD

<7> [280.597457] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:DP-1]

<7> [280.597843] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A]

<6> [280.599375] [IGT] kms_pm_rpm: finished subtest basic-pci-d3-state, SUCCESS

<7> [280.599891] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [280.600482] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:293] from all active usage due to RMFB ioctl

<7> [280.601141] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [280.601862] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [280.606328] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [280.606343] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [280.608321] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [280.614170] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [280.614210] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80

<7> [280.615087] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [280.616457] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [280.627938] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel

<7> [280.631265] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [280.633295] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0

<7> [280.635164] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes

<7> [280.635338] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [280.635538] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [280.635713] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [280.657958] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz

<7> [280.657967] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [280.657970] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K

<7> [280.657972] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1

<7> [280.657983] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes

<7> [280.658084] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [280.659697] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [280.659794] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [280.661540] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:31:plane 1A] because [FB:293] is removed

<7> [280.661635] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 4027) -> ( 0 - 0), size 4027 -> 0

<7> [280.661750] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [280.661846] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [280.661938] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [280.662030] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [280.662125] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 0 num active planes 0

<7> [280.662232] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10441 required 0

<7> [280.662334] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15946 required 0

<7> [280.662445] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 17848 required 0

<7> [280.662553] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 18818 required 0

<7> [280.662660] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 0

<7> [280.662765] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 51200 required 0

<7> [280.662872] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 0

<7> [280.663912] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:31:plane 1A]

<7> [280.681287] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [280.681821] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [280.681931] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [280.682319] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [280.682441] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [280.682446] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [280.682552] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [280.690312] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [280.690314] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [280.690445] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [280.690665] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)

<7> [280.691007] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4027), size 0 -> 4027

<7> [280.691138] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [280.691243] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0

<7> [280.691340] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201

<7> [280.691456] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207

<7> [280.691551] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 2133000 num active planes 1

<7> [280.691656] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10441 required 2240

<7> [280.691767] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15946 required 2240

<7> [280.691877] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 17848 required 2240

<7> [280.691985] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 18818 required 2240

<7> [280.692090] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 2240

<7> [280.692192] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 51200 required 2240

<7> [280.692289] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 2240

<7> [280.692628] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 34283520 bytes of contiguous stolen space for FBC, limit: 1

<7> [280.692727] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:31:plane 1A]

<7> [280.697568] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [280.697821] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [280.697955] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_USBC2

<7> [280.698083] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy)

<7> [280.726403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [280.755403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [280.784404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [280.813404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [280.842403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [280.871404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [280.900404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [280.929405] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [280.958404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [280.987404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [281.016403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [281.045404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [281.074404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [281.102403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [281.131404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [281.160403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [281.189405] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [281.218403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [281.247403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [281.276403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [281.305405] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [281.334403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [281.363403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [281.392403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [281.421404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [281.450403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [281.479403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [281.507404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [281.536404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [281.565404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [281.594404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [281.623403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [281.623546] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110

<7> [281.623565] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]

<7> [281.623765] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)

<6> [281.630972] Console: switching to colour frame buffer device 480x135

<7> [281.631002] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]

<7> [281.631279] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt)

Results for igt@kms_pm_rpm@basic-pci-d3-state