Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Duration 0.05 seconds
Igt-Version 
IGT-Version: 1.28-g86173d01d (x86_64) (Linux: 6.8.0-linus-v6.8-ge8f897f4afef+ x86_64)
Out 
Using IGT_SRANDOM=1710105668 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.048s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.048s)
Dmesg
<6> [229.864923] Console: switching to colour dummy device 80x25
<6> [229.865203] [IGT] kms_force_connector_basic: executing
<7> [229.868310] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [229.868922] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [229.884366] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [229.885056] [drm:status_store] [CONNECTOR:249:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [229.885062] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [229.885068] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [229.885608] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [229.885714] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [229.886155] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [229.886265] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [229.886270] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [229.886364] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [229.894116] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [229.894119] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [229.894205] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [229.894228] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [229.894232] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [229.894680] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [229.894767] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [229.895146] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [229.895235] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [229.895238] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [229.895331] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [229.903096] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [229.903099] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [229.903187] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [229.903242] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [229.903246] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [229.903678] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [229.903757] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [229.904141] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [229.904231] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [229.904234] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [229.904319] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [229.912009] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [229.912012] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [229.912117] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<6> [229.912377] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [229.912466] [drm:status_store] [CONNECTOR:249:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [229.912470] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [229.912474] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [229.912912] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [229.912995] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [229.913405] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [229.913496] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [229.913503] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [229.913585] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [229.921311] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [229.921316] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [229.921404] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] status updated from disconnected to connected
<7> [229.921506] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] probed modes :
<7> [229.921509] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [229.921514] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [229.921517] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [229.921520] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [229.921523] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [229.921546] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [229.921549] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [229.921942] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [229.922030] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [229.922431] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [229.922519] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [229.922525] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [229.922608] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [229.930333] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [229.930339] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [229.930458] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] probed modes :
<7> [229.930460] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [229.930464] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [229.930466] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [229.930468] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [229.930470] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [229.930582] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:249:HDMI-A-1] EDID override set
<7> [229.930598] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [229.930601] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [229.930720] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:249:HDMI-A-1] ELD monitor IGT
<7> [229.930723] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:249:HDMI-A-1] ELD size 24, SAD count 0
<7> [229.931022] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [229.931130] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [229.931506] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [229.931601] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [229.931658] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [229.931662] [drm:drm_mode_prune_invalid] Not using 800x600 mode: STALE
<7> [229.931666] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [229.931669] [drm:drm_mode_prune_invalid] Not using 848x480 mode: STALE
<7> [229.931673] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] probed modes :
<7> [229.931675] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [229.931678] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [229.931680] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [229.931683] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [229.931685] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [229.931687] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [229.931766] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:249:HDMI-A-1] EDID override set
<7> [229.931783] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [229.931785] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [229.931891] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:249:HDMI-A-1] ELD monitor IGT
<7> [229.931894] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:249:HDMI-A-1] ELD size 24, SAD count 0
<7> [229.931897] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:249:HDMI-A-1] EDID changed, epoch counter 4
<7> [229.932249] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [229.932338] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [229.932717] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [229.932807] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [229.932879] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [229.932883] [drm:drm_mode_prune_invalid] Not using 1400x1050 mode: STALE
<7> [229.932888] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] probed modes :
<7> [229.932890] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [229.932892] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [229.932895] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [229.932897] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [229.932900] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [229.932963] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:249:HDMI-A-1] EDID override reset
<7> [229.932977] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [229.932980] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [229.933426] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [229.933510] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [229.933912] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [229.933998] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [229.934003] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [229.934104] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [229.941823] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [229.941828] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [229.941910] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:249:HDMI-A-1] EDID changed, epoch counter 5
<7> [229.941940] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [229.941943] [drm:drm_mode_prune_invalid] Not using 1920x1080 mode: STALE
<7> [229.941947] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [229.941950] [drm:drm_mode_prune_invalid] Not using 1280x720 mode: STALE
<7> [229.941953] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] probed modes :
<7> [229.941955] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [229.941958] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [229.941960] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [229.941962] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [229.941964] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [229.942040] [drm:status_store] [CONNECTOR:249:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [229.942044] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [229.942047] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [229.942525] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [229.942622] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [229.943031] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [229.943135] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [229.943138] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [229.943222] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [229.950934] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [229.950937] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [229.951028] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] status updated from connected to disconnected
<7> [229.951036] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [229.951187] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [229.951193] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [229.951693] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [229.951783] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [229.952191] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [229.952281] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [229.952285] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [229.952381] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [229.960088] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [229.960092] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [229.960212] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<6> [229.960515] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [229.960595] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [229.961095] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:236:DP-1] EDID override reset
<7> [229.961107] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1]
<7> [229.961111] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]
<7> [229.966118] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80
<7> [229.966132] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80
<7> [229.967554] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [229.971859] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80
<7> [229.971870] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80
<7> [229.973302] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000
<7> [229.974738] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel
<7> [229.977530] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [229.979039] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0
<7> [229.980561] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes
<7> [229.980653] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [229.980738] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
<7> [229.980821] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
<7> [230.000749] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz
<7> [230.000758] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [230.000760] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K
<7> [230.000763] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1
<7> [230.000773] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes
<7> [230.000874] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [230.002379] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [230.002475] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [230.004142] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1] probed modes :
<7> [230.004145] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 533250 3840 3888 3920 4000 2160 2214 2219 2222 0x48 0x9
<7> [230.004148] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 266640 3840 3848 3992 4000 2160 2214 2219 2222 0x40 0x9
<7> [230.004150] [drm:drm_mode_debug_printmodeline] Modeline "2560x1440": 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x40 0x9
<7> [230.004153] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [230.004155] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [230.004157] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [230.004159] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
<7> [230.004162] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [230.004164] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6
<7> [230.004166] [drm:drm_mode_debug_printmodeline] Modeline "1152x864": 60 81768 1152 1216 1336 1520 864 867 871 897 0x0 0x6
<7> [230.004168] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [230.004171] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [230.004173] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [230.004175] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [230.004177] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [230.004179] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
<7> [230.004182] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
<7> [230.004184] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
<7> [230.004186] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [230.004188] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [230.004299] [drm:status_store] [CONNECTOR:249:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [230.004303] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [230.004307] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [230.004751] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [230.004836] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [230.005218] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [230.005308] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [230.005311] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [230.005392] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [230.013137] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [230.013140] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [230.013230] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [230.013254] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [230.013257] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [230.013705] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [230.013789] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [230.014175] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [230.014267] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [230.014270] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [230.014352] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [230.022034] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [230.022037] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [230.022134] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [230.022221] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:249:HDMI-A-1] EDID override reset
<7> [230.022236] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [230.022240] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [230.022703] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [230.022791] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [230.023178] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [230.023265] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [230.023268] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [230.023347] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [230.031034] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [230.031037] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [230.031164] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [230.031230] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:255:DP-2] EDID override reset
<7> [230.031241] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2]
<7> [230.031244] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]
<7> [230.031428] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2] disconnected
<7> [230.031490] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:264:DP-3] EDID override reset
<7> [230.031500] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-3]
<7> [230.031503] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]
<7> [230.060083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [230.089083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [230.118083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [230.147083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [230.176084] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [230.205083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [230.234083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [230.263083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [230.292084] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [230.321083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [230.350083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [230.379083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [230.408084] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [230.437083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [230.466083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [230.495083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [230.524084] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [230.553084] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [230.582083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [230.611083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [230.640084] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [230.669083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [230.698085] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [230.727083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [230.756084] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [230.785083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [230.814083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [230.843083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [230.872083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [230.901083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [230.930083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [230.959083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [230.959219] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110
<7> [230.959235] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-3] disconnected
<7> [230.959355] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:273:DP-4] EDID override reset
<7> [230.959373] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-4]
<7> [230.959377] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]
<7> [230.959543] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-4] disconnected
<7> [230.959615] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:282:DP-5] EDID override reset
<7> [230.959627] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-5]
<7> [230.959629] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]
<7> [230.959781] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-5] disconnected
<6> [230.960205] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [230.960290] [drm:status_store] [CONNECTOR:249:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [230.960295] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [230.960299] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [230.960750] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [230.960842] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [230.961235] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [230.961329] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [230.961333] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [230.961412] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [230.969182] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [230.969185] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [230.969278] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [230.969432] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [230.986638] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0]
<7> [230.986643] [drm:drm_client_modeset_probe]
<7> [230.986668] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1]
<7> [230.986674] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]
<7> [230.991858] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80
<7> [230.991870] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80
<7> [230.993461] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [230.998149] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80
<7> [230.998167] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80
<7> [230.999745] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000
<7> [231.001140] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel
<7> [231.004399] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [231.006022] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0
<7> [231.007626] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes
<7> [231.007751] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [231.007872] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
<7> [231.007986] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
<7> [231.028059] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz
<7> [231.028067] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [231.028070] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K
<7> [231.028081] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1
<7> [231.028092] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes
<7> [231.028213] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [231.029757] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [231.029857] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [231.031540] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1] probed modes :
<7> [231.031543] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 533250 3840 3888 3920 4000 2160 2214 2219 2222 0x48 0x9
<7> [231.031547] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 266640 3840 3848 3992 4000 2160 2214 2219 2222 0x40 0x9
<7> [231.031550] [drm:drm_mode_debug_printmodeline] Modeline "2560x1440": 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x40 0x9
<7> [231.031552] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [231.031555] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [231.031557] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [231.031559] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
<7> [231.031562] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [231.031564] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6
<7> [231.031567] [drm:drm_mode_debug_printmodeline] Modeline "1152x864": 60 81768 1152 1216 1336 1520 864 867 871 897 0x0 0x6
<7> [231.031570] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [231.031572] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [231.031574] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [231.031577] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [231.031579] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [231.031582] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
<7> [231.031584] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
<7> [231.031587] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
<7> [231.031589] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [231.031591] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [231.031594] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [231.031598] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [231.032033] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [231.032133] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [231.032523] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [231.032615] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [231.032618] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [231.032703] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [231.040449] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [231.040453] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [231.040544] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [231.040548] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2]
<7> [231.040551] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]
<7> [231.040702] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2] disconnected
<7> [231.040705] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-3]
<7> [231.040708] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]
<7> [231.071084] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [231.100083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [231.129086] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [231.158083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [231.187083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [231.216083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [231.245084] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [231.274083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [231.303083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [231.332083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [231.361084] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [231.390083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [231.419083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [231.448083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [231.477084] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [231.506083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [231.535083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [231.564084] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [231.593084] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [231.622083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [231.651083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [231.680084] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [231.709083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [231.738083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [231.767083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [231.796083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [231.825084] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [231.854084] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [231.883083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [231.912083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [231.941083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [231.970083] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [231.970227] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110
<7> [231.970239] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-3] disconnected
<7> [231.970245] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-4]
<7> [231.970248] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]
<7> [231.970411] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-4] disconnected
<7> [231.970414] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-5]
<7> [231.970417] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]
<7> [231.970569] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-5] disconnected
<7> [231.970572] [drm:drm_client_modeset_probe] connector 236 enabled? yes
<7> [231.970576] [drm:drm_client_modeset_probe] connector 249 enabled? no
<7> [231.970577] [drm:drm_client_modeset_probe] connector 255 enabled? no
<7> [231.970579] [drm:drm_client_modeset_probe] connector 264 enabled? no
<7> [231.970581] [drm:drm_client_modeset_probe] connector 273 enabled? no
<7> [231.970582] [drm:drm_client_modeset_probe] connector 282 enabled? no
<7> [231.970602] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [231.970608] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236
<7> [231.970611] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0
<7> [231.970613] [drm:drm_client_modeset_probe] found mode 3840x2160
<7> [231.970614] [drm:drm_client_modeset_probe] picking CRTCs for 3840x2160 config
<7> [231.970627] [drm:drm_client_modeset_probe] desired mode 3840x2160 set on crtc 80 (0,0)
<6> [232.003625] Console: switching to colour frame buffer device 480x135
Created at 2024-03-10 22:41:12