Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 1.28-g86173d01d (x86_64) (Linux: 6.8.0-linus-v6.8-ge8f897f4afef+ x86_64)
Out 
Using IGT_SRANDOM=1710105713 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.029s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.029s)
Dmesg
<6> [266.786081] Console: switching to colour dummy device 80x25
<6> [266.786248] [IGT] kms_force_connector_basic: executing
<7> [266.788124] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [266.788710] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [266.800018] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [266.800620] [drm:status_store] [CONNECTOR:245:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [266.800626] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [266.800630] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [266.800828] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] disconnected
<7> [266.800850] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [266.800853] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [266.801028] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] disconnected
<7> [266.801075] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [266.801078] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [266.801218] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] disconnected
<6> [266.801392] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [266.801473] [drm:status_store] [CONNECTOR:245:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [266.801478] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [266.801481] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [266.801900] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [266.802004] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [266.802407] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [266.802504] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [266.802512] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [266.802601] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [266.809680] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [266.809685] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [266.809808] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] status updated from disconnected to connected
<7> [266.809892] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] probed modes :
<7> [266.809896] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [266.809901] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [266.809904] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [266.809908] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [266.809911] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [266.809935] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [266.809939] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [266.810366] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [266.810460] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [266.810875] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [266.810976] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [266.810982] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [266.811073] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [266.818113] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [266.818117] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [266.818230] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] probed modes :
<7> [266.818233] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [266.818236] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [266.818239] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [266.818241] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [266.818243] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [266.818353] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:245:HDMI-A-1] EDID override set
<7> [266.818367] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [266.818370] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [266.818487] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:245:HDMI-A-1] ELD monitor IGT
<7> [266.818490] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:245:HDMI-A-1] ELD size 24, SAD count 0
<7> [266.818815] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [266.818906] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [266.819332] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [266.819426] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [266.819486] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [266.819490] [drm:drm_mode_prune_invalid] Not using 800x600 mode: STALE
<7> [266.819494] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [266.819496] [drm:drm_mode_prune_invalid] Not using 848x480 mode: STALE
<7> [266.819500] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] probed modes :
<7> [266.819502] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [266.819505] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [266.819507] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [266.819509] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [266.819511] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [266.819514] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [266.819586] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:245:HDMI-A-1] EDID override set
<7> [266.819600] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [266.819602] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [266.819719] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:245:HDMI-A-1] ELD monitor IGT
<7> [266.819722] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:245:HDMI-A-1] ELD size 24, SAD count 0
<7> [266.819725] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:245:HDMI-A-1] EDID changed, epoch counter 4
<7> [266.820082] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [266.820181] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [266.820593] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [266.820689] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [266.820741] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [266.820745] [drm:drm_mode_prune_invalid] Not using 1400x1050 mode: STALE
<7> [266.820749] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] probed modes :
<7> [266.820751] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [266.820761] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [266.820764] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [266.820766] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [266.820769] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [266.820833] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:245:HDMI-A-1] EDID override reset
<7> [266.820847] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [266.820850] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [266.821575] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [266.821662] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [266.822090] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [266.822186] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [266.822191] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [266.822279] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [266.829273] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [266.829278] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [266.829360] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:245:HDMI-A-1] EDID changed, epoch counter 5
<7> [266.829389] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [266.829393] [drm:drm_mode_prune_invalid] Not using 1920x1080 mode: STALE
<7> [266.829396] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [266.829399] [drm:drm_mode_prune_invalid] Not using 1280x720 mode: STALE
<7> [266.829403] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] probed modes :
<7> [266.829405] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [266.829407] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [266.829409] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [266.829411] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [266.829414] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [266.829500] [drm:status_store] [CONNECTOR:245:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [266.829504] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [266.829508] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [266.829667] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] status updated from connected to disconnected
<7> [266.829675] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] disconnected
<7> [266.829767] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [266.829770] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [266.829914] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] disconnected
<6> [266.830099] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [266.830170] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [266.830663] [drm:status_store] [CONNECTOR:236:eDP-1] force updated from 0 to 0 or reprobing
<7> [266.830667] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1]
<7> [266.830671] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]
<7> [266.831533] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [266.832205] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [266.832303] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [266.832397] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [266.832488] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [266.832590] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [266.832594] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [266.832597] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor
<7> [266.832600] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0
<7> [266.832611] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no
<7> [266.832707] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [266.833540] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [266.833630] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [266.834343] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes :
<7> [266.834346] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [266.834350] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [266.834371] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1]
<7> [266.834374] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]
<7> [266.835207] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [266.835844] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [266.835939] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [266.836030] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [266.836120] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [266.836219] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [266.836223] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [266.836226] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor
<7> [266.836229] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0
<7> [266.836238] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no
<7> [266.836331] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [266.837161] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [266.837252] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [266.837921] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes :
<7> [266.837924] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [266.837927] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [266.837987] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:236:eDP-1] EDID override reset
<7> [266.837998] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1]
<7> [266.838001] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]
<7> [266.838800] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [266.839429] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [266.839519] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [266.839609] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [266.839702] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [266.839811] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [266.839814] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [266.839817] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor
<7> [266.839820] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0
<7> [266.839828] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no
<7> [266.839917] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [266.840719] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [266.840833] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [266.841507] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes :
<7> [266.841510] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [266.841514] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [266.841612] [drm:status_store] [CONNECTOR:245:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [266.841616] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [266.841619] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [266.841790] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] disconnected
<7> [266.841809] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [266.841813] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [266.841948] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] disconnected
<7> [266.842000] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:245:HDMI-A-1] EDID override reset
<7> [266.842010] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [266.842013] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [266.842148] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] disconnected
<7> [266.842206] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:254:DP-1] EDID override reset
<7> [266.842216] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:254:DP-1]
<7> [266.842218] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:254:DP-1]
<7> [266.842368] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:254:DP-1] disconnected
<7> [266.842425] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:264:DP-2] EDID override reset
<7> [266.842435] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-2]
<7> [266.842437] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-2]
<7> [266.872763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [266.901762] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [266.930763] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [266.959762] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [266.988761] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [267.017761] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [267.046761] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [267.075761] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [267.104760] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [267.133759] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [267.162760] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [267.191759] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [267.220758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [267.249758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [267.278759] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [267.307758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [267.336757] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [267.365757] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [267.394757] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [267.423758] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [267.452755] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [267.481755] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [267.510756] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [267.539755] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [267.568754] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [267.597753] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [267.626754] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [267.655753] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [267.684753] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [267.713752] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [267.742752] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [267.771752] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [267.771887] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110
<7> [267.771900] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-2] disconnected
<7> [267.771985] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:273:DP-3] EDID override reset
<7> [267.771998] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-3]
<7> [267.772001] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-3]
<7> [267.772153] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-3] disconnected
<7> [267.772211] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:282:DP-4] EDID override reset
<7> [267.772220] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-4]
<7> [267.772222] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-4]
<7> [267.772372] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-4] disconnected
<6> [267.772691] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [267.772800] [drm:status_store] [CONNECTOR:245:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [267.772804] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [267.772808] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [267.772955] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] disconnected
<7> [267.772982] [drm:status_store] [CONNECTOR:236:eDP-1] force updated from 0 to 0 or reprobing
<7> [267.772986] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1]
<7> [267.772989] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]
<7> [267.773794] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [267.774454] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [267.774543] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [267.774628] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [267.774711] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [267.774814] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [267.774818] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [267.774821] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor
<7> [267.774823] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0
<7> [267.774833] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no
<7> [267.774929] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [267.775760] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [267.775853] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [267.776550] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes :
<7> [267.776553] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [267.776557] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [267.776691] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [267.796702] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0]
<7> [267.796707] [drm:drm_client_modeset_probe]
<7> [267.796731] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1]
<7> [267.796735] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]
<7> [267.797619] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [267.798454] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [267.798545] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [267.798631] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [267.798870] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [267.799072] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [267.799076] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [267.799080] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor
<7> [267.799082] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0
<7> [267.799092] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no
<7> [267.799184] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [267.800081] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [267.800298] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [267.801251] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes :
<7> [267.801259] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [267.801268] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [267.801275] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [267.801283] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [267.801584] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] disconnected
<7> [267.801593] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:254:DP-1]
<7> [267.801600] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:254:DP-1]
<7> [267.801819] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:254:DP-1] disconnected
<7> [267.801822] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-2]
<7> [267.801825] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-2]
<7> [267.830751] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [267.859751] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [267.888751] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [267.914750] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [267.943751] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [267.972750] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [268.001750] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [268.030748] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [268.059750] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [268.088749] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [268.117748] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [268.146747] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [268.175748] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [268.204747] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [268.233746] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [268.262746] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [268.291746] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [268.320746] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [268.349745] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [268.378744] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [268.407745] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [268.436744] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [268.465743] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [268.494743] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [268.523743] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [268.552742] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [268.581742] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [268.610742] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [268.639742] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [268.668741] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [268.697741] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [268.726740] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [268.726878] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110
<7> [268.726890] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-2] disconnected
<7> [268.726894] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-3]
<7> [268.726897] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-3]
<7> [268.727051] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-3] disconnected
<7> [268.727054] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-4]
<7> [268.727057] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-4]
<7> [268.727203] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-4] disconnected
<7> [268.727205] [drm:drm_client_modeset_probe] connector 236 enabled? yes
<7> [268.727209] [drm:drm_client_modeset_probe] connector 245 enabled? no
<7> [268.727210] [drm:drm_client_modeset_probe] connector 254 enabled? no
<7> [268.727212] [drm:drm_client_modeset_probe] connector 264 enabled? no
<7> [268.727213] [drm:drm_client_modeset_probe] connector 273 enabled? no
<7> [268.727215] [drm:drm_client_modeset_probe] connector 282 enabled? no
<7> [268.727233] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [268.727239] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236
<7> [268.727241] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0
<7> [268.727243] [drm:drm_client_modeset_probe] found mode 3840x2160
<7> [268.727244] [drm:drm_client_modeset_probe] picking CRTCs for 3840x2160 config
<7> [268.727256] [drm:drm_client_modeset_probe] desired mode 3840x2160 set on crtc 80 (0,0)
<6> [268.763973] Console: switching to colour frame buffer device 480x135
Created at 2024-03-10 22:41:12