<5>[ 0.000000] Linux version 6.8.0-rc7-linus-v6.8-rc7-g90d35da658da+ (kbuild2@gfx-ci) (gcc (Ubuntu 9.4.0-1ubuntu1~20.04.2) 9.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1 SMP PREEMPT_DYNAMIC Sun Mar 3 21:09:06 UTC 2024 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes console=tty1 console=ttyS0,115200 iommu=pt nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 drm.debug=0xe log_buf_len=1M trace_clock=global 3 ro <6>[ 0.000000] x86/tme: not enabled by BIOS <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000060a3efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000060a3f000-0x0000000063db6fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000063db7000-0x0000000063edbfff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x0000000063edc000-0x0000000063ffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x0000000063fff000-0x0000000063ffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000064000000-0x00000000787fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000000ffffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087fffffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] APIC: Static calls initialized <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x63ffe000 ACPI 2.0=0x63ffe014 TPMFinalLog=0x63e11000 SMBIOS=0x60b16000 MEMATTR=0x5be06018 ESRT=0x5be22118 TPMEventLog=0x5bd07018 <6>[ 0.000000] efi: Remove mem307: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem309: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.6 present. <6>[ 0.000000] DMI: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3471.D91.2401310918 01/31/2024 <6>[ 0.000000] tsc: Detected 3400.000 MHz processor <6>[ 0.000000] tsc: Detected 3379.200 MHz TSC <7>[ 0.000011] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000015] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000020] last_pfn = 0x880000 max_arch_pfn = 0x400000000 <6>[ 0.000024] MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs <6>[ 0.000026] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <6>[ 0.000394] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000395] last_pfn = 0x64000 max_arch_pfn = 0x400000000 <6>[ 0.000400] esrt: Reserving ESRT space from 0x000000005be22118 to 0x000000005be22240. <7>[ 0.000407] e820: update [mem 0x5be22000-0x5be22fff] usable ==> reserved <6>[ 0.000436] Using GB pages for direct mapping <6>[ 0.001183] printk: log_buf_len: 1048576 bytes <6>[ 0.001185] printk: early log buf free: 259128(98%) <6>[ 0.001186] Secure boot disabled <6>[ 0.001189] ACPI: Early table checksum verification disabled <6>[ 0.001193] ACPI: RSDP 0x0000000063FFE014 000024 (v02 INTEL ) <6>[ 0.001197] ACPI: XSDT 0x0000000063F15228 000184 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001203] ACPI: FACP 0x0000000063FDC000 000114 (v06 INTEL MTL 00000002 01000013) <6>[ 0.001208] ACPI: DSDT 0x0000000063F55000 083F8A (v02 INTEL MTL 00000002 01000013) <6>[ 0.001211] ACPI: FACS 0x0000000063DF7000 000040 <6>[ 0.001214] ACPI: SSDT 0x0000000063FFC000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.001217] ACPI: SSDT 0x0000000063FFB000 00070D (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.001220] ACPI: SSDT 0x0000000063FFA000 0005E4 (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.001223] ACPI: SSDT 0x0000000063FF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.001225] ACPI: SSDT 0x0000000063FF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930) <6>[ 0.001228] ACPI: SSDT 0x0000000063FF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.001231] ACPI: SSDT 0x0000000063FF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.001234] ACPI: SSDT 0x0000000063FF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.001237] ACPI: SSDT 0x0000000063FF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930) <6>[ 0.001239] ACPI: SSDT 0x0000000063FED000 003BC8 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.001242] ACPI: DTPR 0x0000000063FEC000 000098 (v01 00000000 00000000) <6>[ 0.001245] ACPI: SSDT 0x0000000063FEB000 000D03 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.001248] ACPI: SSDT 0x0000000063FE8000 002494 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.001251] ACPI: SSDT 0x0000000063FDE000 009AB7 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.001253] ACPI: SSDT 0x0000000063FDD000 0000F9 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.001256] ACPI: HPET 0x0000000063FDB000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001259] ACPI: APIC 0x0000000063FDA000 000358 (v05 INTEL MTL 00000002 01000013) <6>[ 0.001261] ACPI: MCFG 0x0000000063FD9000 00003C (v01 INTEL MTL 00000002 01000013) <6>[ 0.001264] ACPI: SSDT 0x0000000063F45000 00FCEF (v02 INTEL MtlP_Rvp 00001000 INTL 20210930) <6>[ 0.001267] ACPI: SSDT 0x0000000063F43000 00147F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.001270] ACPI: SSDT 0x0000000063F3E000 00389C (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.001273] ACPI: SSDT 0x0000000063F38000 00535A (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.001276] ACPI: SSDT 0x0000000063FFD000 00060E (v02 INTEL Tpm2Tabl 00001000 INTL 20210930) <6>[ 0.001279] ACPI: TPM2 0x0000000063F37000 00004C (v04 INTEL MTL 00000002 01000013) <6>[ 0.001282] ACPI: LPIT 0x0000000063F36000 0000CC (v01 INTEL MTL 00000002 01000013) <6>[ 0.001285] ACPI: WSMT 0x0000000063F35000 000028 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001287] ACPI: SSDT 0x0000000063F34000 000CA6 (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.001290] ACPI: SSDT 0x0000000063F2E000 00587D (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.001293] ACPI: DBGP 0x0000000063F2D000 000034 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001296] ACPI: DBG2 0x0000000063F2C000 000054 (v00 INTEL MTL 00000002 01000013) <6>[ 0.001298] ACPI: NHLT 0x0000000063F2B000 00098B (v00 INTEL MTL 00000002 01000013) <6>[ 0.001301] ACPI: SSDT 0x0000000063F29000 001191 (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.001304] ACPI: SSDT 0x0000000063F23000 005CAE (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.001307] ACPI: ECDT 0x0000000063F22000 000069 (v01 MTL 00000002 01000013) <6>[ 0.001310] ACPI: DMAR 0x0000000063F21000 0000A8 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001312] ACPI: FPDT 0x0000000063F20000 000044 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001315] ACPI: SSDT 0x0000000063F1E000 001015 (v02 INTEL xh_mtlp3 00000000 INTL 20210930) <6>[ 0.001317] ACPI: SSDT 0x0000000063F1B000 00281A (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.001320] ACPI: SSDT 0x0000000063F18000 0028D3 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.001323] ACPI: SSDT 0x0000000063F16000 0011A0 (v02 INTEL St00Ssdt 00001000 INTL 20210930) <6>[ 0.001325] ACPI: ASF! 0x0000000063F42000 000074 (v32 INTEL MTL 00000002 01000013) <6>[ 0.001328] ACPI: PHAT 0x0000000063F14000 000810 (v01 INTEL MTL 00000005 MSFT 0100000D) <6>[ 0.001331] ACPI: BGRT 0x0000000063F13000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001333] ACPI: Reserving FACP table memory at [mem 0x63fdc000-0x63fdc113] <6>[ 0.001334] ACPI: Reserving DSDT table memory at [mem 0x63f55000-0x63fd8f89] <6>[ 0.001336] ACPI: Reserving FACS table memory at [mem 0x63df7000-0x63df703f] <6>[ 0.001337] ACPI: Reserving SSDT table memory at [mem 0x63ffc000-0x63ffc38b] <6>[ 0.001337] ACPI: Reserving SSDT table memory at [mem 0x63ffb000-0x63ffb70c] <6>[ 0.001338] ACPI: Reserving SSDT table memory at [mem 0x63ffa000-0x63ffa5e3] <6>[ 0.001339] ACPI: Reserving SSDT table memory at [mem 0x63ff9000-0x63ff91aa] <6>[ 0.001340] ACPI: Reserving SSDT table memory at [mem 0x63ff8000-0x63ff8393] <6>[ 0.001341] ACPI: Reserving SSDT table memory at [mem 0x63ff6000-0x63ff7bae] <6>[ 0.001341] ACPI: Reserving SSDT table memory at [mem 0x63ff4000-0x63ff561f] <6>[ 0.001342] ACPI: Reserving SSDT table memory at [mem 0x63ff2000-0x63ff3348] <6>[ 0.001343] ACPI: Reserving SSDT table memory at [mem 0x63ff1000-0x63ff1fba] <6>[ 0.001344] ACPI: Reserving SSDT table memory at [mem 0x63fed000-0x63ff0bc7] <6>[ 0.001345] ACPI: Reserving DTPR table memory at [mem 0x63fec000-0x63fec097] <6>[ 0.001346] ACPI: Reserving SSDT table memory at [mem 0x63feb000-0x63febd02] <6>[ 0.001347] ACPI: Reserving SSDT table memory at [mem 0x63fe8000-0x63fea493] <6>[ 0.001348] ACPI: Reserving SSDT table memory at [mem 0x63fde000-0x63fe7ab6] <6>[ 0.001349] ACPI: Reserving SSDT table memory at [mem 0x63fdd000-0x63fdd0f8] <6>[ 0.001350] ACPI: Reserving HPET table memory at [mem 0x63fdb000-0x63fdb037] <6>[ 0.001350] ACPI: Reserving APIC table memory at [mem 0x63fda000-0x63fda357] <6>[ 0.001351] ACPI: Reserving MCFG table memory at [mem 0x63fd9000-0x63fd903b] <6>[ 0.001352] ACPI: Reserving SSDT table memory at [mem 0x63f45000-0x63f54cee] <6>[ 0.001353] ACPI: Reserving SSDT table memory at [mem 0x63f43000-0x63f4447e] <6>[ 0.001354] ACPI: Reserving SSDT table memory at [mem 0x63f3e000-0x63f4189b] <6>[ 0.001355] ACPI: Reserving SSDT table memory at [mem 0x63f38000-0x63f3d359] <6>[ 0.001355] ACPI: Reserving SSDT table memory at [mem 0x63ffd000-0x63ffd60d] <6>[ 0.001356] ACPI: Reserving TPM2 table memory at [mem 0x63f37000-0x63f3704b] <6>[ 0.001357] ACPI: Reserving LPIT table memory at [mem 0x63f36000-0x63f360cb] <6>[ 0.001358] ACPI: Reserving WSMT table memory at [mem 0x63f35000-0x63f35027] <6>[ 0.001359] ACPI: Reserving SSDT table memory at [mem 0x63f34000-0x63f34ca5] <6>[ 0.001360] ACPI: Reserving SSDT table memory at [mem 0x63f2e000-0x63f3387c] <6>[ 0.001361] ACPI: Reserving DBGP table memory at [mem 0x63f2d000-0x63f2d033] <6>[ 0.001361] ACPI: Reserving DBG2 table memory at [mem 0x63f2c000-0x63f2c053] <6>[ 0.001362] ACPI: Reserving NHLT table memory at [mem 0x63f2b000-0x63f2b98a] <6>[ 0.001363] ACPI: Reserving SSDT table memory at [mem 0x63f29000-0x63f2a190] <6>[ 0.001364] ACPI: Reserving SSDT table memory at [mem 0x63f23000-0x63f28cad] <6>[ 0.001365] ACPI: Reserving ECDT table memory at [mem 0x63f22000-0x63f22068] <6>[ 0.001365] ACPI: Reserving DMAR table memory at [mem 0x63f21000-0x63f210a7] <6>[ 0.001366] ACPI: Reserving FPDT table memory at [mem 0x63f20000-0x63f20043] <6>[ 0.001367] ACPI: Reserving SSDT table memory at [mem 0x63f1e000-0x63f1f014] <6>[ 0.001368] ACPI: Reserving SSDT table memory at [mem 0x63f1b000-0x63f1d819] <6>[ 0.001369] ACPI: Reserving SSDT table memory at [mem 0x63f18000-0x63f1a8d2] <6>[ 0.001370] ACPI: Reserving SSDT table memory at [mem 0x63f16000-0x63f1719f] <6>[ 0.001371] ACPI: Reserving ASF! table memory at [mem 0x63f42000-0x63f42073] <6>[ 0.001371] ACPI: Reserving PHAT table memory at [mem 0x63f14000-0x63f1480f] <6>[ 0.001372] ACPI: Reserving BGRT table memory at [mem 0x63f13000-0x63f13037] <6>[ 0.001445] APIC: Switched APIC routing to: cluster x2apic <6>[ 0.046137] Zone ranges: <6>[ 0.046139] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.046142] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.046144] Normal [mem 0x0000000100000000-0x000000087fffffff] <6>[ 0.046146] Movable zone start for each node <6>[ 0.046146] Early memory node ranges <6>[ 0.046147] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.046149] node 0: [mem 0x0000000000100000-0x0000000060a3efff] <6>[ 0.046150] node 0: [mem 0x0000000063fff000-0x0000000063ffffff] <6>[ 0.046151] node 0: [mem 0x0000000100000000-0x000000087fffffff] <6>[ 0.046154] Initmem setup node 0 [mem 0x0000000000001000-0x000000087fffffff] <6>[ 0.046160] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.046191] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.049120] On node 0, zone DMA32: 13760 pages in unavailable ranges <6>[ 0.092649] On node 0, zone Normal: 16384 pages in unavailable ranges <6>[ 0.093122] ACPI: PM-Timer IO Port: 0x1808 <6>[ 0.093128] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.093174] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.093177] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.093179] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.093181] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.093182] ACPI: HPET id: 0x8086a201 base: 0xfed00000 <7>[ 0.093192] e820: update [mem 0x5bdc1000-0x5bddbfff] usable ==> reserved <6>[ 0.093199] TSC deadline timer available <6>[ 0.093200] smpboot: Allowing 22 CPUs, 0 hotplug CPUs <6>[ 0.093209] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.093211] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.093212] PM: hibernation: Registered nosave memory: [mem 0x5bdc1000-0x5bddbfff] <6>[ 0.093213] PM: hibernation: Registered nosave memory: [mem 0x5be22000-0x5be22fff] <6>[ 0.093214] PM: hibernation: Registered nosave memory: [mem 0x60a3f000-0x63db6fff] <6>[ 0.093215] PM: hibernation: Registered nosave memory: [mem 0x63db7000-0x63edbfff] <6>[ 0.093216] PM: hibernation: Registered nosave memory: [mem 0x63edc000-0x63ffefff] <6>[ 0.093217] PM: hibernation: Registered nosave memory: [mem 0x64000000-0x787fffff] <6>[ 0.093218] PM: hibernation: Registered nosave memory: [mem 0x78800000-0xfed1ffff] <6>[ 0.093219] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff] <6>[ 0.093219] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff] <6>[ 0.093222] [mem 0x78800000-0xfed1ffff] available for PCI devices <6>[ 0.093227] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.096176] setup_percpu: NR_CPUS:64 nr_cpumask_bits:22 nr_cpu_ids:22 nr_node_ids:1 <6>[ 0.097642] percpu: Embedded 72 pages/cpu s257120 r8192 d29600 u524288 <7>[ 0.097645] pcpu-alloc: s257120 r8192 d29600 u524288 alloc=1*2097152 <7>[ 0.097647] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 <7>[ 0.097652] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 <7>[ 0.097657] pcpu-alloc: [0] 16 17 18 19 [0] 20 21 -- -- <5>[ 0.097669] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes console=tty1 console=ttyS0,115200 iommu=pt nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 drm.debug=0xe log_buf_len=1M trace_clock=global 3 ro <5>[ 0.097740] Unknown kernel command line parameters "3 BOOT_IMAGE=/boot/drm_intel", will be passed to user space. <5>[ 0.097770] random: crng init done <6>[ 0.100590] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.102002] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.102096] Built 1 zonelists, mobility grouping on. Total pages: 8130839 <6>[ 0.102100] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.102101] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.102102] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) <6>[ 0.103534] software IO TLB: area num 32. <6>[ 0.697840] Memory: 32238852K/33040248K available (16384K kernel code, 2633K rwdata, 5652K rodata, 2636K init, 20912K bss, 801140K reserved, 0K cma-reserved) <4>[ 0.697847] ********************************************************** <4>[ 0.697848] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.697848] ** ** <4>[ 0.697849] ** This system shows unhashed kernel memory addresses ** <4>[ 0.697849] ** via the console, logs, and other interfaces. This ** <4>[ 0.697850] ** might reduce the security of your system. ** <4>[ 0.697850] ** ** <4>[ 0.697851] ** If you see this message and you are not debugging ** <4>[ 0.697851] ** the kernel, report this immediately to your system ** <4>[ 0.697851] ** administrator! ** <4>[ 0.697852] ** ** <4>[ 0.697852] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.697852] ********************************************************** <6>[ 0.698008] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=22, Nodes=1 <6>[ 0.698434] Dynamic Preempt: full <6>[ 0.698779] Running RCU self tests <6>[ 0.698780] Running RCU synchronous self tests <6>[ 0.698805] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.698806] rcu: RCU lockdep checking is enabled. <6>[ 0.698806] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=22. <6>[ 0.698807] rcu: RCU callback double-/use-after-free debug is enabled. <6>[ 0.698808] Trampoline variant of Tasks RCU enabled. <6>[ 0.698808] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.698809] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=22 <6>[ 0.698887] Running RCU synchronous self tests <6>[ 0.702459] NR_IRQS: 4352, nr_irqs: 2232, preallocated irqs: 16 <6>[ 0.702833] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.703190] Console: colour dummy device 80x25 <6>[ 0.703202] printk: legacy console [tty1] enabled <6>[ 0.705175] printk: legacy console [ttyS0] enabled <4>[ 2.217664] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <4>[ 2.225349] ... MAX_LOCKDEP_SUBCLASSES: 8 <4>[ 2.229419] ... MAX_LOCK_DEPTH: 48 <4>[ 2.233575] ... MAX_LOCKDEP_KEYS: 8192 <4>[ 2.237905] ... CLASSHASH_SIZE: 4096 <4>[ 2.242239] ... MAX_LOCKDEP_ENTRIES: 32768 <4>[ 2.246653] ... MAX_LOCKDEP_CHAINS: 131072 <4>[ 2.251158] ... CHAINHASH_SIZE: 65536 <4>[ 2.255577] memory used by lock dependency info: 9397 kB <4>[ 2.260942] memory used for stack traces: 8320 kB <4>[ 2.265706] per task-struct memory footprint: 1920 bytes <6>[ 2.271081] ACPI: Core revision 20230628 <6>[ 2.276155] hpet: HPET dysfunctional in PC10. Force disabled. <6>[ 2.281860] APIC: Switch to symmetric I/O mode setup <6>[ 2.286793] DMAR: Host address width 42 <6>[ 2.290604] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 2.295904] DMAR: dmar0: reg_base_addr fc800000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0ef5e <6>[ 2.304616] DMAR: DRHD base: 0x000000fc801000 flags: 0x1 <6>[ 2.309902] DMAR: dmar1: reg_base_addr fc801000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0efde <6>[ 2.318614] DMAR: SATC flags: 0x1 <6>[ 2.321920] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc801000 IOMMU 1 <6>[ 2.328221] DMAR-IR: HPET id 0 under DRHD base 0xfc801000 <6>[ 2.333576] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 2.343813] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 2.353715] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 2.364159] Calibrating delay loop (skipped), value calculated using timer frequency.. 6758.40 BogoMIPS (lpj=3379200) <6>[ 2.365148] CPU0: Thermal monitoring enabled (TM1) <6>[ 2.365148] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 2.365148] process: using mwait in idle threads <6>[ 2.365148] CET detected: Indirect Branch Tracking enabled <6>[ 2.365148] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 2.365148] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 2.365148] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 2.365148] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 2.365148] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch <6>[ 2.365148] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 2.365148] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 2.365148] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 2.365148] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 2.365148] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 2.365148] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 2.365148] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' <6>[ 2.365148] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 2.365148] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 2.365148] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 <6>[ 2.365148] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format. <6>[ 2.365148] Freeing SMP alternatives memory: 36K <6>[ 2.365148] pid_max: default: 32768 minimum: 301 <6>[ 2.365148] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 2.365148] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 2.365148] Running RCU synchronous self tests <6>[ 2.365148] Running RCU synchronous self tests <6>[ 2.365148] smpboot: CPU0: Intel(R) Core(TM) Ultra 7 1003H (family: 0x6, model: 0xaa, stepping: 0x4) <6>[ 2.366278] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1. <6>[ 2.367212] Running RCU Tasks wait API self tests <6>[ 2.368277] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Meteorlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 2.369293] core: cpu_core PMU driver: <6>[ 2.370157] ... version: 5 <6>[ 2.371157] ... bit width: 48 <6>[ 2.372156] ... generic registers: 8 <6>[ 2.373157] ... value mask: 0000ffffffffffff <6>[ 2.374159] ... max period: 00007fffffffffff <6>[ 2.375157] ... fixed-purpose events: 4 <6>[ 2.376160] ... event mask: 0001000f000000ff <6>[ 2.377230] signal: max sigframe size: 3632 <6>[ 2.378177] Estimated ratio of average max frequency by base frequency (times 1024): 1445 <6>[ 2.379277] rcu: Hierarchical SRCU implementation. <6>[ 2.380163] rcu: Max phase no-delay instances is 400. <6>[ 2.383510] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 2.385182] smp: Bringing up secondary CPUs ... <6>[ 2.387330] smpboot: x86: Booting SMP configuration: <6>[ 2.388167] .... node #0, CPUs: #1 #3 #6 #8 #10 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 <6>[ 1.662179] core: cpu_atom PMU driver: PEBS-via-PT <6>[ 1.662179] ... version: 5 <6>[ 1.662179] ... bit width: 48 <6>[ 1.662179] ... generic registers: 8 <6>[ 1.662179] ... value mask: 0000ffffffffffff <6>[ 1.662179] ... max period: 00007fffffffffff <6>[ 1.662179] ... fixed-purpose events: 3 <6>[ 1.662179] ... event mask: 00000007000000ff <4>[ 2.450344] #2 #4 #5 #7 #9 #11 <6>[ 2.456223] smp: Brought up 1 node, 22 CPUs <6>[ 2.458155] smpboot: Max logical packages: 1 <6>[ 2.459156] smpboot: Total of 22 processors activated (148684.80 BogoMIPS) <6>[ 2.467408] devtmpfs: initialized <6>[ 2.470308] ACPI: PM: Registering ACPI NVS region [mem 0x63db7000-0x63edbfff] (1200128 bytes) <6>[ 2.471597] Running RCU synchronous self tests <6>[ 2.472168] Running RCU synchronous self tests <6>[ 2.473217] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 2.474166] futex hash table entries: 8192 (order: 8, 1048576 bytes, linear) <6>[ 2.475441] pinctrl core: initialized pinctrl subsystem <6>[ 2.476645] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 2.478239] thermal_sys: Registered thermal governor 'fair_share' <6>[ 2.478241] thermal_sys: Registered thermal governor 'step_wise' <6>[ 2.479157] thermal_sys: Registered thermal governor 'user_space' <6>[ 2.480217] cpuidle: using governor menu <6>[ 2.482216] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 2.483386] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff] <6>[ 2.484167] PCI: not using ECAM ([mem 0xc0000000-0xcfffffff] not reserved) <6>[ 2.485166] PCI: Using configuration type 1 for base access <6>[ 2.486286] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 2.487221] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 2.488159] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 2.489327] cryptd: max_cpu_qlen set to 1000 <6>[ 2.507152] raid6: avx2x4 gen() 53748 MB/s <6>[ 2.527956] raid6: avx2x2 gen() 59327 MB/s <6>[ 2.549149] raid6: avx2x1 gen() 57569 MB/s <6>[ 2.553166] raid6: using algorithm avx2x2 gen() 59327 MB/s <6>[ 2.574588] raid6: .... xor() 13596 MB/s, rmw enabled <6>[ 2.579164] raid6: using avx2x2 recovery algorithm <6>[ 2.584182] Callback from call_rcu_tasks() invoked. <6>[ 2.585484] ACPI: Added _OSI(Module Device) <6>[ 2.589164] ACPI: Added _OSI(Processor Device) <6>[ 2.593164] ACPI: Added _OSI(3.0 _SCP Extensions) <6>[ 2.598163] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 3.147055] ACPI: 28 ACPI AML tables successfully acquired and loaded <6>[ 3.169130] ACPI: EC: EC started <6>[ 3.173150] ACPI: EC: interrupt blocked <6>[ 3.182259] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 3.187164] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 3.524746] ACPI: _OSC evaluated successfully for all CPUs <6>[ 3.530167] ACPI: Interpreter enabled <6>[ 3.533292] ACPI: PM: (supports S0 S4 S5) <6>[ 3.538166] ACPI: Using IOAPIC for interrupt routing <6>[ 3.542355] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff] <6>[ 3.594581] PCI: ECAM [mem 0xc0000000-0xcfffffff] reserved as ACPI motherboard resource <6>[ 3.602193] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 3.611174] PCI: Ignoring E820 reservations for host bridge windows <6>[ 3.653798] ACPI: Enabled 10 GPEs in block 00 to 7F <6>[ 3.658183] ACPI: Enabled 8 GPEs in block 80 to DF <6>[ 3.734749] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 3.998110] ACPI: \_SB_.PC00.RP01.PXP_: New power resource <6>[ 4.027388] ACPI: \_SB_.PC00.RP06.PXP_: New power resource <6>[ 4.041696] ACPI: \_SB_.PC00.RP07.PXP_: New power resource <6>[ 4.064853] ACPI: \_SB_.PC00.RP09.PXP_: New power resource <6>[ 4.077848] ACPI: \_SB_.PC00.RP10.PXP_: New power resource <6>[ 4.091669] ACPI: \_SB_.PC00.RP11.PXP_: New power resource <6>[ 4.105508] ACPI: \_SB_.PC00.RP12.PXP_: New power resource <6>[ 4.295962] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 4.301593] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 4.306562] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 4.431646] ACPI: \_TZ_.FN00: New power resource <6>[ 4.436980] ACPI: \_TZ_.FN01: New power resource <6>[ 4.441959] ACPI: \_TZ_.FN02: New power resource <6>[ 4.446953] ACPI: \_TZ_.FN03: New power resource <6>[ 4.452943] ACPI: \_TZ_.FN04: New power resource <6>[ 4.463083] ACPI: \PIN_: New power resource <6>[ 4.470726] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 4.477182] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] <6>[ 4.490651] acpi PNP0A08:00: _OSC: platform does not support [AER] <6>[ 4.504807] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability LTR] <6>[ 4.524866] PCI host bridge to bus 0000:00 <6>[ 4.529168] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 4.535171] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 4.542171] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 4.549174] pci_bus 0000:00: root bus resource [mem 0x80000000-0xbfffffff window] <6>[ 4.557175] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x3ffbfffffff window] <6>[ 4.565178] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 4.582151] pci 0000:00:00.0: [8086:7d01] type 00 class 0x060000 conventional PCI endpoint <6>[ 4.590943] pci 0000:00:02.0: [8086:7d55] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint <6>[ 4.600192] pci 0000:00:02.0: BAR 0 [mem 0x5018000000-0x5018ffffff 64bit pref] <6>[ 4.607181] pci 0000:00:02.0: BAR 2 [mem 0x4000000000-0x400fffffff 64bit pref] <6>[ 4.614220] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics <6>[ 4.621173] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 4.629228] pci 0000:00:02.0: PME# supported from D0 D3hot <6>[ 4.636776] pci 0000:00:04.0: [8086:7d03] type 00 class 0x118000 conventional PCI endpoint <6>[ 4.644191] pci 0000:00:04.0: BAR 0 [mem 0x501a280000-0x501a29ffff 64bit] <6>[ 4.652767] pci 0000:00:05.0: [8086:7d19] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint <6>[ 4.662188] pci 0000:00:05.0: BAR 0 [mem 0x5019000000-0x5019ffffff 64bit] <6>[ 4.669189] pci 0000:00:05.0: enabling Extended Tags <6>[ 4.674300] pci 0000:00:06.0: [8086:7ecb] type 01 class 0x060400 PCIe Root Port <6>[ 4.682221] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 4.687191] pci 0000:00:06.0: bridge window [mem 0x8c000000-0x8c0fffff] <6>[ 4.694310] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold <6>[ 4.705950] pci 0000:00:07.0: [8086:7ec6] type 01 class 0x060400 PCIe Root Port <6>[ 4.713233] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 4.718202] pci 0000:00:07.0: bridge window [mem 0x86000000-0x8bffffff] <6>[ 4.725210] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 4.733431] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 4.744327] pci 0000:00:07.3: [8086:7ec7] type 01 class 0x060400 PCIe Root Port <6>[ 4.751233] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 4.757206] pci 0000:00:07.3: bridge window [mem 0x80000000-0x85ffffff] <6>[ 4.763209] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 4.771422] pci 0000:00:07.3: PME# supported from D0 D3hot D3cold <6>[ 4.783184] pci 0000:00:08.0: [8086:7e4c] type 00 class 0x088000 conventional PCI endpoint <6>[ 4.791188] pci 0000:00:08.0: BAR 0 [mem 0x501a2e3000-0x501a2e3fff 64bit] <6>[ 4.798721] pci 0000:00:0a.0: [8086:7d0d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint <6>[ 4.807186] pci 0000:00:0a.0: BAR 0 [mem 0x501a240000-0x501a27ffff 64bit] <6>[ 4.814190] pci 0000:00:0a.0: enabling Extended Tags <6>[ 4.819434] pci 0000:00:0b.0: [8086:7d1d] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint <6>[ 4.828188] pci 0000:00:0b.0: BAR 0 [mem 0x5010000000-0x5017ffffff 64bit] <6>[ 4.835183] pci 0000:00:0b.0: BAR 4 [mem 0x501a2e2000-0x501a2e2fff 64bit] <6>[ 4.842747] pci 0000:00:0d.0: [8086:7ec0] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 4.851214] pci 0000:00:0d.0: BAR 0 [mem 0x501a2c0000-0x501a2cffff 64bit] <6>[ 4.857296] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 4.865222] pci 0000:00:0d.3: [8086:7ec3] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 4.873213] pci 0000:00:0d.3: BAR 0 [mem 0x501a200000-0x501a23ffff 64bit] <6>[ 4.880202] pci 0000:00:0d.3: BAR 2 [mem 0x501a2e1000-0x501a2e1fff 64bit] <6>[ 4.887303] pci 0000:00:0d.3: supports D1 D2 <6>[ 4.891163] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 4.899846] pci 0000:00:12.0: [8086:7e45] type 00 class 0x070000 conventional PCI endpoint <6>[ 4.908192] pci 0000:00:12.0: BAR 0 [mem 0x501a2b0000-0x501a2bffff 64bit] <6>[ 4.914241] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 4.923245] pci 0000:00:14.0: [8086:7e7d] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 4.931191] pci 0000:00:14.0: BAR 0 [mem 0x501a2a0000-0x501a2affff 64bit] <6>[ 4.938256] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 4.946589] pci 0000:00:14.2: [8086:7e7f] type 00 class 0x050000 conventional PCI endpoint <6>[ 4.954192] pci 0000:00:14.2: BAR 0 [mem 0x501a2d4000-0x501a2d7fff 64bit] <6>[ 4.961181] pci 0000:00:14.2: BAR 2 [mem 0x501a2e0000-0x501a2e0fff 64bit] <6>[ 4.968548] pci 0000:00:15.0: [8086:7e78] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 4.976227] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 4.984935] pci 0000:00:15.1: [8086:7e79] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 4.993224] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 5.000911] pci 0000:00:15.2: [8086:7e7a] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 5.009228] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 5.016930] pci 0000:00:15.3: [8086:7e7b] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 5.025223] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 5.033959] pci 0000:00:16.0: [8086:7e70] type 00 class 0x078000 conventional PCI endpoint <6>[ 5.042199] pci 0000:00:16.0: BAR 0 [mem 0x501a2db000-0x501a2dbfff 64bit] <6>[ 5.048279] pci 0000:00:16.0: PME# supported from D3hot <6>[ 5.057111] pci 0000:00:16.3: [8086:7e73] type 00 class 0x070002 conventional PCI endpoint <6>[ 5.065187] pci 0000:00:16.3: BAR 0 [io 0x3020-0x3027] <6>[ 5.070170] pci 0000:00:16.3: BAR 1 [mem 0x8c121000-0x8c121fff] <6>[ 5.076552] pci 0000:00:19.0: [8086:7e50] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 5.084243] pci 0000:00:19.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 5.091956] pci 0000:00:19.1: [8086:7e51] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 5.100229] pci 0000:00:19.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 5.107930] pci 0000:00:1f.0: [8086:7e02] type 00 class 0x060100 conventional PCI endpoint <6>[ 5.117959] pci 0000:00:1f.3: [8086:7e28] type 00 class 0x040100 conventional PCI endpoint <6>[ 5.126218] pci 0000:00:1f.3: BAR 0 [mem 0x501a2d0000-0x501a2d3fff 64bit] <6>[ 5.133224] pci 0000:00:1f.3: BAR 4 [mem 0x501a000000-0x501a1fffff 64bit] <6>[ 5.139292] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 5.145707] pci 0000:00:1f.4: [8086:7e22] type 00 class 0x0c0500 conventional PCI endpoint <6>[ 5.154197] pci 0000:00:1f.4: BAR 0 [mem 0x501a2d8000-0x501a2d80ff 64bit] <6>[ 5.161196] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] <6>[ 5.167649] pci 0000:00:1f.5: [8086:7e23] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 5.176212] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] <6>[ 5.182537] pci 0000:00:1f.6: [8086:550a] type 00 class 0x020000 conventional PCI endpoint <6>[ 5.190200] pci 0000:00:1f.6: BAR 0 [mem 0x8c100000-0x8c11ffff] <6>[ 5.196340] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold <6>[ 5.203966] pci 0000:01:00.0: [15b7:501e] type 00 class 0x010802 PCIe Endpoint <6>[ 5.211323] pci 0000:01:00.0: BAR 0 [mem 0x8c000000-0x8c003fff 64bit] <6>[ 5.219607] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 5.224394] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 5.229368] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <7>[ 5.235223] pci_bus 0000:00: on NUMA node 0 <6>[ 9.462499] Low-power S0 idle used by default for system suspend <6>[ 9.870258] ACPI: EC: interrupt unblocked <6>[ 9.874150] ACPI: EC: event unblocked <6>[ 9.878151] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 9.883166] ACPI: EC: GPE=0x6e <6>[ 9.886164] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 9.893176] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 9.901229] iommu: Default domain type: Passthrough (set via kernel command line) <5>[ 9.908834] SCSI subsystem initialized <7>[ 9.913231] libata version 3.00 loaded. <6>[ 9.913351] ACPI: bus type USB registered <6>[ 9.917260] usbcore: registered new interface driver usbfs <6>[ 9.923209] usbcore: registered new interface driver hub <6>[ 9.928247] usbcore: registered new device driver usb <6>[ 9.934447] efivars: Registered efivars operations <6>[ 9.939322] Advanced Linux Sound Architecture Driver Initialized. <6>[ 9.946107] PCI: Using ACPI for IRQ routing <7>[ 9.968133] PCI: pci_cache_line_size set to 64 bytes <6>[ 9.968368] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window <7>[ 9.978434] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 9.978447] e820: reserve RAM buffer [mem 0x5bdc1000-0x5bffffff] <7>[ 9.978452] e820: reserve RAM buffer [mem 0x5be22000-0x5bffffff] <7>[ 9.978457] e820: reserve RAM buffer [mem 0x60a3f000-0x63ffffff] <6>[ 9.978607] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 9.979148] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 9.979148] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 9.998170] vgaarb: loaded <6>[ 10.001435] clocksource: Switched to clocksource tsc-early <6>[ 10.008657] pnp: PnP ACPI init <6>[ 10.012832] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 10.018730] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 10.025333] system 00:01: [io 0x1854-0x1857] has been reserved <6>[ 10.032939] system 00:03: [io 0x06a4] has been reserved <6>[ 10.038228] system 00:03: [io 0x06a0] has been reserved <6>[ 10.069996] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 10.076603] system 00:04: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 10.083523] system 00:04: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 10.090443] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 10.097020] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved <6>[ 10.103941] system 00:04: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 10.110863] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 10.117782] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 10.130741] system 00:05: [io 0x2000-0x20fe] has been reserved <6>[ 10.138112] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved <6>[ 10.148556] pnp: PnP ACPI: found 8 devices <6>[ 10.165462] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 10.174616] NET: Registered PF_INET protocol family <6>[ 10.179783] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 10.190458] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear) <6>[ 10.199387] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 10.207100] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 10.215420] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage) <6>[ 10.225229] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 10.232243] UDP hash table entries: 16384 (order: 9, 2621440 bytes, linear) <6>[ 10.239796] UDP-Lite hash table entries: 16384 (order: 9, 2621440 bytes, linear) <6>[ 10.247987] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 10.253652] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 02-2b] add_size 1000 <6>[ 10.262036] pci 0000:00:07.3: bridge window [io 0x1000-0x0fff] to [bus 2c-55] add_size 1000 <6>[ 10.270447] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned <6>[ 10.277194] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff]: assigned <6>[ 10.283939] pci 0000:00:15.0: BAR 0 [mem 0x501a2d9000-0x501a2d9fff 64bit]: assigned <6>[ 10.291606] pci 0000:00:15.1: BAR 0 [mem 0x501a2da000-0x501a2dafff 64bit]: assigned <6>[ 10.299249] pci 0000:00:15.2: BAR 0 [mem 0x501a2dc000-0x501a2dcfff 64bit]: assigned <6>[ 10.306893] pci 0000:00:15.3: BAR 0 [mem 0x501a2dd000-0x501a2ddfff 64bit]: assigned <6>[ 10.314536] pci 0000:00:19.0: BAR 0 [mem 0x501a2de000-0x501a2defff 64bit]: assigned <6>[ 10.322176] pci 0000:00:19.1: BAR 0 [mem 0x501a2df000-0x501a2dffff 64bit]: assigned <6>[ 10.329817] pci 0000:00:1f.5: BAR 0 [mem 0x8c120000-0x8c120fff]: assigned <6>[ 10.336595] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 10.341550] pci 0000:00:06.0: bridge window [mem 0x8c000000-0x8c0fffff] <6>[ 10.348318] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 10.353547] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 10.359630] pci 0000:00:07.0: bridge window [mem 0x86000000-0x8bffffff] <6>[ 10.366412] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 10.374482] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 10.379708] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff] <6>[ 10.385795] pci 0000:00:07.3: bridge window [mem 0x80000000-0x85ffffff] <6>[ 10.392574] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 10.400646] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 10.406783] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 10.412920] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 10.419748] pci_bus 0000:00: resource 7 [mem 0x80000000-0xbfffffff window] <6>[ 10.426577] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x3ffbfffffff window] <6>[ 10.433835] pci_bus 0000:01: resource 1 [mem 0x8c000000-0x8c0fffff] <6>[ 10.440064] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] <6>[ 10.445612] pci_bus 0000:02: resource 1 [mem 0x86000000-0x8bffffff] <6>[ 10.451846] pci_bus 0000:02: resource 2 [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 10.459365] pci_bus 0000:2c: resource 0 [io 0x5000-0x5fff] <6>[ 10.464903] pci_bus 0000:2c: resource 1 [mem 0x80000000-0x85ffffff] <6>[ 10.471129] pci_bus 0000:2c: resource 2 [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 10.480142] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 10.488160] PCI: CLS 0 bytes, default 64 <6>[ 10.492174] DMAR: No RMRR found <6>[ 10.495325] DMAR: No ATSR found <6>[ 10.498454] DMAR: IOMMU feature sc_support inconsistent <6>[ 10.498459] DMAR: dmar0: Using Queued invalidation <6>[ 10.508440] DMAR: dmar1: Using Queued invalidation <6>[ 10.514014] pci 0000:00:02.0: Adding to iommu group 0 <6>[ 10.519587] pci 0000:00:00.0: Adding to iommu group 1 <6>[ 10.524688] pci 0000:00:04.0: Adding to iommu group 2 <6>[ 10.529782] pci 0000:00:05.0: Adding to iommu group 3 <6>[ 10.534901] pci 0000:00:06.0: Adding to iommu group 4 <6>[ 10.540034] pci 0000:00:07.0: Adding to iommu group 5 <6>[ 10.545162] pci 0000:00:07.3: Adding to iommu group 6 <6>[ 10.550258] pci 0000:00:08.0: Adding to iommu group 7 <6>[ 10.555349] pci 0000:00:0a.0: Adding to iommu group 8 <6>[ 10.560449] pci 0000:00:0b.0: Adding to iommu group 9 <6>[ 10.565581] pci 0000:00:0d.0: Adding to iommu group 10 <6>[ 10.570751] pci 0000:00:0d.3: Adding to iommu group 10 <6>[ 10.575946] pci 0000:00:12.0: Adding to iommu group 11 <6>[ 10.581168] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 10.586336] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 10.591591] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 10.596766] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 10.601941] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 10.607111] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 10.612333] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 10.617510] pci 0000:00:16.3: Adding to iommu group 14 <6>[ 10.622729] pci 0000:00:19.0: Adding to iommu group 15 <6>[ 10.627904] pci 0000:00:19.1: Adding to iommu group 15 <6>[ 10.633173] pci 0000:00:1f.0: Adding to iommu group 16 <6>[ 10.638348] pci 0000:00:1f.3: Adding to iommu group 16 <6>[ 10.643527] pci 0000:00:1f.4: Adding to iommu group 16 <6>[ 10.648699] pci 0000:00:1f.5: Adding to iommu group 16 <6>[ 10.653875] pci 0000:00:1f.6: Adding to iommu group 16 <6>[ 10.659074] pci 0000:01:00.0: Adding to iommu group 17 <6>[ 10.664819] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 10.671222] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 10.677620] software IO TLB: mapped [mem 0x0000000056e6e000-0x000000005ae6e000] (64MB) <6>[ 10.685963] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 10.693848] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 10.699556] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 10.705177] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules <6>[ 10.710798] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 10.718388] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 10.728380] clocksource: Switched to clocksource tsc <6>[ 10.733470] platform rtc_cmos: registered platform RTC device (no PNP device found) <6>[ 10.755774] workingset: timestamp_bits=62 max_order=23 bucket_order=0 <6>[ 10.765672] ntfs: driver 2.1.32 [Flags: R/O]. <6>[ 10.777795] NET: Registered PF_ALG protocol family <6>[ 10.782580] xor: automatically using best checksumming function avx <6>[ 10.789644] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) <6>[ 10.796994] io scheduler mq-deadline registered <6>[ 10.801504] io scheduler kyber registered <6>[ 10.807768] pcieport 0000:00:06.0: PME: Signaling with IRQ 122 <6>[ 10.815108] pcieport 0000:00:07.0: PME: Signaling with IRQ 123 <6>[ 10.821124] pcieport 0000:00:07.0: pciehp: Slot #14 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ <6>[ 10.836711] pcieport 0000:00:07.3: PME: Signaling with IRQ 124 <6>[ 10.842775] pcieport 0000:00:07.3: pciehp: Slot #15 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ <6>[ 10.862997] ACPI: AC: AC Adapter [ADP1] (on-line) <6>[ 10.867974] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 10.880388] ACPI: button: Lid Switch [LID0] <6>[ 10.884755] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 10.893218] ACPI: button: Sleep Button [SLPB] <6>[ 10.897698] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 10.906158] ACPI: button: Power Button [PWRB] <6>[ 10.972806] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 10.978427] ACPI: thermal: Thermal Zone [TZ00] (31 C) <6>[ 10.984427] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled <6>[ 10.986287] ACPI: battery: Slot [BAT0] (battery present) <6>[ 10.996125] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 10.996478] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 11.005438] serial 0000:00:12.0: enabling device (0000 -> 0002) <6>[ 11.016335] serial 0000:00:16.3: enabling device (0000 -> 0003) <6>[ 11.023512] 0000:00:16.3: ttyS1 at I/O 0x3020 (irq = 19, base_baud = 115200) is a 16550A <4>[ 11.032165] hpet_acpi_add: no address or irqs in _CRS <6>[ 11.037524] Non-volatile memory driver v1.3 <6>[ 11.041790] Linux agpgart interface v0.103 <6>[ 11.077273] ACPI: bus type drm_connector registered <6>[ 11.093617] loop: module loaded <6>[ 11.098102] nvme 0000:01:00.0: platform quirk: setting simple suspend <6>[ 11.098614] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 11.104997] nvme nvme0: pci function 0000:01:00.0 <6>[ 11.109881] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 11.122984] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 11.133083] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 11.138351] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 11.145754] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 11.152989] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08 <6>[ 11.161270] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 11.166112] nvme nvme0: allocated 64 MiB host memory buffer. <6>[ 11.168477] usb usb1: Product: xHCI Host Controller <6>[ 11.178944] usb usb1: Manufacturer: Linux 6.8.0-rc7-linus-v6.8-rc7-g90d35da658da+ xhci-hcd <6>[ 11.187154] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 11.193069] hub 1-0:1.0: USB hub found <6>[ 11.197104] hub 1-0:1.0: 1 port detected <6>[ 11.205537] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.08 <6>[ 11.213757] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 11.220931] usb usb2: Product: xHCI Host Controller <6>[ 11.225780] usb usb2: Manufacturer: Linux 6.8.0-rc7-linus-v6.8-rc7-g90d35da658da+ xhci-hcd <6>[ 11.233984] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 11.239337] hub 2-0:1.0: USB hub found <6>[ 11.243189] hub 2-0:1.0: 4 ports detected <6>[ 11.272775] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 11.277994] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 11.286525] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 11.296898] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 11.302106] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 11.309460] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 11.316897] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08 <6>[ 11.325121] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 11.326880] nvme nvme0: 16/0/0 default/read/poll queues <6>[ 11.332360] usb usb3: Product: xHCI Host Controller <6>[ 11.342420] usb usb3: Manufacturer: Linux 6.8.0-rc7-linus-v6.8-rc7-g90d35da658da+ xhci-hcd <6>[ 11.350712] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 11.352156] nvme0n1: p1 p2 <6>[ 11.355913] hub 3-0:1.0: USB hub found <6>[ 11.361988] hub 3-0:1.0: 12 ports detected <6>[ 11.385411] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.08 <6>[ 11.393668] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 11.400893] usb usb4: Product: xHCI Host Controller <6>[ 11.405950] usb usb4: Manufacturer: Linux 6.8.0-rc7-linus-v6.8-rc7-g90d35da658da+ xhci-hcd <6>[ 11.414402] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 11.419620] hub 4-0:1.0: USB hub found <6>[ 11.423655] hub 4-0:1.0: 2 ports detected <6>[ 11.430746] usbcore: registered new interface driver usb-storage <6>[ 11.436996] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 11.444039] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <3>[ 12.155400] i8042: Can't read CTR while initializing i8042 <4>[ 12.160855] i8042: probe of i8042 failed with error -5 <6>[ 12.166326] mousedev: PS/2 mouse device common for all mice <6>[ 12.172823] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 12.179102] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 12.184023] rtc_cmos rtc_cmos: setting system clock to 2024-03-03T21:44:58 UTC (1709502298) <6>[ 12.192478] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 12.199509] IR JVC protocol handler initialized <6>[ 12.204018] IR MCE Keyboard/mouse protocol handler initialized <6>[ 12.209865] IR NEC protocol handler initialized <6>[ 12.214370] IR RC5(x/sz) protocol handler initialized <6>[ 12.219448] IR RC6 protocol handler initialized <6>[ 12.223948] IR SANYO protocol handler initialized <6>[ 12.228675] IR Sharp protocol handler initialized <6>[ 12.233349] IR Sony protocol handler initialized <6>[ 12.237988] IR XMP protocol handler initialized <6>[ 12.246159] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 12.254537] softdog: soft_reboot_cmd= soft_active_on_boot=0 <6>[ 12.261970] device-mapper: uevent: version 1.0.3 <6>[ 12.266950] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com <6>[ 12.275325] intel_pstate: Intel P-state driver initializing <6>[ 12.287307] intel_pstate: HWP enabled <6>[ 12.291096] sdhci: Secure Digital Host Controller Interface driver <6>[ 12.297241] sdhci: Copyright(c) Pierre Ossman <6>[ 12.303467] efifb: probing for efifb <6>[ 12.307052] efifb: framebuffer at 0x70800000, using 20252k, total 20250k <6>[ 12.313707] efifb: mode is 2880x1800x32, linelength=11520, pages=1 <6>[ 12.319928] efifb: scrolling: redraw <6>[ 12.323532] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 <6>[ 12.334514] Console: switching to colour frame buffer device 360x112 <6>[ 12.344569] fb0: EFI VGA frame buffer device <6>[ 12.349037] pstore: Using crash dump compression: deflate <6>[ 12.354420] pstore: Registered efi_pstore as persistent store backend <6>[ 12.360895] hid: raw HID events driver (C) Jiri Kosina <6>[ 12.366390] usbcore: registered new interface driver usbhid <6>[ 12.371928] usbhid: USB HID core driver <6>[ 12.374710] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd <6>[ 12.375811] intel_rapl_msr: PL4 support detected. <6>[ 12.387251] intel_rapl_common: Found RAPL domain package <6>[ 12.392625] intel_rapl_common: Found RAPL domain core <6>[ 12.397693] intel_rapl_common: Found RAPL domain uncore <6>[ 12.402944] intel_rapl_common: Found RAPL domain psys <6>[ 12.411435] usb 4-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 <6>[ 12.412245] Initializing XFRM netlink socket <6>[ 12.419554] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 <6>[ 12.419556] usb 4-1: Product: USB 10/100/1000 LAN <6>[ 12.419557] usb 4-1: Manufacturer: Realtek <6>[ 12.419558] usb 4-1: SerialNumber: 000001 <6>[ 12.443754] NET: Registered PF_INET6 protocol family <6>[ 12.450208] Segment Routing with IPv6 <6>[ 12.453923] In-situ OAM (IOAM) with IPv6 <6>[ 12.457857] mip6: Mobile IPv6 <6>[ 12.460817] NET: Registered PF_PACKET protocol family <6>[ 12.465839] NET: Registered PF_KEY protocol family <4>[ 12.483079] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 12.491438] microcode: Current revision: 0x0000001c <6>[ 12.499030] IPI shorthand broadcast: enabled <6>[ 12.503307] AVX2 version of gcm_enc/dec engaged. <6>[ 12.510138] AES CTR mode by8 optimization enabled <6>[ 12.522379] sched_clock: Marking stable (10861001602, 1661179137)->(12997519335, -475338596) <6>[ 12.531623] registered taskstats version 1 <6>[ 12.545097] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers <6>[ 12.556307] Btrfs loaded, zoned=no, fsverity=no <6>[ 12.562346] clk: Disabling unused clocks <6>[ 12.566260] ALSA device list: <6>[ 12.569224] No soundcards found. <6>[ 12.573014] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) <6>[ 12.640408] EXT4-fs (nvme0n1p2): mounted filesystem ed02f62a-9bfb-4be2-9589-0a26044f1f47 ro with ordered data mode. Quota mode: disabled. <6>[ 12.652688] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 12.661262] devtmpfs: mounted <6>[ 12.665792] Freeing unused kernel image (initmem) memory: 2636K <6>[ 12.671709] Write protecting the kernel read-only data: 22528k <6>[ 12.679113] Freeing unused kernel image (rodata/data gap) memory: 492K <6>[ 12.685610] Run /sbin/init as init process <7>[ 12.689687] with arguments: <7>[ 12.689689] /sbin/init <7>[ 12.689690] 3 <7>[ 12.689691] with environment: <7>[ 12.689693] HOME=/ <7>[ 12.689694] TERM=linux <7>[ 12.689695] BOOT_IMAGE=/boot/drm_intel <7>[ 12.805013] systemd[1]: systemd 245.4-4ubuntu3.22 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) <7>[ 12.827898] systemd[1]: Detected architecture x86-64. <7>[ 12.850765] systemd[1]: Set hostname to . <6>[ 12.911692] cat (192) used greatest stack depth: 13016 bytes left <6>[ 12.917934] mkdir (195) used greatest stack depth: 12600 bytes left <6>[ 12.927923] netplan (190) used greatest stack depth: 12120 bytes left <6>[ 12.934331] systemd-bless-b (193) used greatest stack depth: 11704 bytes left <7>[ 13.066295] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. <7>[ 13.078836] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) <7>[ 13.088303] systemd[1]: Created slice system-modprobe.slice. <7>[ 13.103219] systemd[1]: Created slice system-serial\x2dgetty.slice. <7>[ 13.119151] systemd[1]: Created slice system-systemd\x2dfsck.slice. <7>[ 13.135279] systemd[1]: Created slice User and Session Slice. <7>[ 13.150898] systemd[1]: Started Forward Password Requests to Wall Directory Watch. <7>[ 13.169690] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. <7>[ 13.181271] systemd[1]: Reached target Remote File Systems. <7>[ 13.196620] systemd[1]: Reached target Slices. <7>[ 13.209993] systemd[1]: Listening on Device-mapper event daemon FIFOs. <7>[ 13.225555] systemd[1]: Listening on Syslog Socket. <7>[ 13.237972] systemd[1]: Listening on fsck to fsckd communication Socket. <7>[ 13.255864] systemd[1]: Listening on initctl Compatibility Named Pipe. <7>[ 13.283053] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. <7>[ 13.291544] systemd[1]: Listening on Journal Socket (/dev/log). <7>[ 13.306739] systemd[1]: Listening on Journal Socket. <7>[ 13.319945] systemd[1]: Listening on udev Control Socket. <7>[ 13.333573] systemd[1]: Listening on udev Kernel Socket. <7>[ 13.368440] systemd[1]: Mounting Huge Pages File System... <7>[ 13.387776] systemd[1]: Mounting POSIX Message Queue File System... <7>[ 13.405786] systemd[1]: Mounting Kernel Debug File System... <7>[ 13.434660] systemd[1]: Mounting Kernel Trace File System... <7>[ 13.453545] systemd[1]: Starting Journal Service... <7>[ 13.468552] systemd[1]: Starting Set the console keyboard layout... <7>[ 13.485656] systemd[1]: Starting Create list of static device nodes for the current kernel... <7>[ 13.503309] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. <7>[ 13.512636] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. <7>[ 13.532562] systemd[1]: Starting File System Check on Root Device... <7>[ 13.551248] systemd[1]: Starting Load Kernel Modules... <7>[ 13.558574] systemd[1]: Starting udev Coldplug all Devices... <7>[ 13.567314] systemd[1]: Starting Uncomplicated firewall... <7>[ 13.575147] systemd[1]: Started Journal Service. <6>[ 13.770515] EXT4-fs (nvme0n1p2): re-mounted ed02f62a-9bfb-4be2-9589-0a26044f1f47 r/w. Quota mode: disabled. <6>[ 13.818042] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SS <7>[ 13.831772] systemd-journald[217]: Received client request to flush runtime journal. <6>[ 14.220095] pps_core: LinuxPPS API ver. 1 registered <6>[ 14.220103] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 14.223218] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 14.227105] i801_smbus 0000:00:1f.4: SPD Write Disable is set <6>[ 14.227258] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt <6>[ 14.231334] PTP clock support registered <6>[ 14.288473] usbcore: registered new device driver r8152-cfgselector <6>[ 14.360527] i2c i2c-0: 8/8 memory slots populated (from DMI) <6>[ 14.360534] i2c i2c-0: Memory type 0x23 not supported yet, not instantiating SPD <6>[ 14.378903] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 14.378908] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 14.381292] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode <6>[ 14.396825] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <6>[ 14.396981] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 14.411556] r8152-cfgselector 4-1: reset SuperSpeed USB device number 2 using xhci_hcd <6>[ 14.412234] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <6>[ 14.415068] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <6>[ 14.424224] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 14.455464] r8152 4-1:1.0: load rtl8153a-4 v2 02/07/20 successfully <6>[ 14.482950] r8152 4-1:1.0 eth0: v1.12.13 <6>[ 14.483030] usbcore: registered new interface driver r8152 <6>[ 14.483106] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <6>[ 14.487863] usbcore: registered new interface driver cdc_ether <6>[ 14.489835] usbcore: registered new interface driver r8153_ecm <6>[ 14.501983] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <6>[ 14.513216] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 14.518842] r8152 4-1:1.0 enxe2015072f492: renamed from eth0 <6>[ 14.575221] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <6>[ 14.577702] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <6>[ 14.581451] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock <6>[ 14.587294] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <4>[ 14.617271] ********************************************************** <4>[ 14.617273] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 14.617274] ** ** <4>[ 14.617275] ** trace_printk() being used. Allocating extra memory. ** <4>[ 14.617275] ** ** <4>[ 14.617276] ** This means that this is a DEBUG kernel and it is ** <4>[ 14.617277] ** unsafe for production use. ** <4>[ 14.617278] ** ** <4>[ 14.617279] ** If you see this message and you are not debugging ** <4>[ 14.617280] ** the kernel, report this immediately to your vendor! ** <4>[ 14.617281] ** ** <4>[ 14.617282] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 14.617283] ********************************************************** <6>[ 14.645898] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88 <6>[ 14.645939] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection <6>[ 14.646051] e1000e 0000:00:1f.6 eth0: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF <6>[ 14.646234] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <6>[ 14.668995] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <6>[ 14.669304] e1000e 0000:00:1f.6 eno0: renamed from eth0 <6>[ 14.672577] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <6>[ 14.681195] intel-lpss 0000:00:19.0: enabling device (0000 -> 0002) <7>[ 14.686922] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7>[ 14.687118] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:no slpc:yes) <7>[ 14.687299] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Meteor Lake PCH <7>[ 14.687430] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7>[ 14.687575] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT1: Setting up Standalone Media GT <7>[ 14.687701] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7>[ 14.687835] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT1: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes) <7>[ 14.688051] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7>[ 14.688169] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 38400 kHz <7>[ 14.688493] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vdbox enable: 0000, instances: 0000 <7>[ 14.688586] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vebox enable: 0000, instances: 0000 <7>[ 14.688996] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vdbox enable: 0005, instances: 0005 <7>[ 14.689082] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vebox enable: 0001, instances: 0001 <7>[ 14.689607] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7>[ 14.689698] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 0M <7>[ 14.689777] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 0M <6>[ 14.689854] i915 0000:00:02.0: [drm] VT-d active for gfx access <6>[ 14.690505] Console: switching to colour dummy device 80x25 <6>[ 14.691712] i915 0000:00:02.0: vgaarb: deactivate vga console <6>[ 14.692082] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7>[ 14.692094] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000078400947 <7>[ 14.692598] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 131072K, usable: 126976K <7>[ 14.693027] i915 0000:00:02.0: [drm:init_stolen_lmem [i915]] Stolen Local memory IO start: 0x0000004000800000 <7>[ 14.693128] i915 0000:00:02.0: [drm:init_stolen_lmem [i915]] Stolen Local DSM base: 0x0000000000800000 <7>[ 14.693484] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x63e09018 <7>[ 14.693621] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 3.0.0 <7>[ 14.693730] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7>[ 14.693835] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7>[ 14.693934] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7>[ 14.694033] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Mailbox #2 for backlight present <7>[ 14.694158] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 14.694279] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 8 <7>[ 14.694360] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: yes <7>[ 14.694441] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=3200 tRP=64 tRDPRE=40 tRAS=136 tRCD=64 tRC=200 <7>[ 14.694570] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=6000 tRP=112 tRDPRE=80 tRAS=0 tRCD=112 tRC=112 <7>[ 14.694692] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=16 tRCD=120 tRC=136 <7>[ 14.694810] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 3: DCLK=5600 tRP=104 tRDPRE=80 tRAS=240 tRCD=104 tRC=344 <7>[ 14.694938] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 0: num_planes=0 deratedbw=28913 peakbw: 51200 <7>[ 14.695045] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 14.695150] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 14.695271] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 14.695378] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 0: num_planes=0 deratedbw=35532 peakbw: 51200 <7>[ 14.695481] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 14.695583] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 14.695686] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 14.695788] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 14.695888] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 14.695988] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 14.696087] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 14.696188] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 14.696291] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 14.696394] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 14.696496] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 14.696608] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 14.696706] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 14.696805] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 14.696900] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 14.696993] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 14.697086] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 14.697184] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 14.697289] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 14.697623] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7>[ 14.697731] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT METEORLAKE ", BDB version 253 <7>[ 14.697840] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7) <7>[ 14.697944] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5) <7>[ 14.698046] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100) <7>[ 14.698147] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7>[ 14.698264] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 814, min size 812) <7>[ 14.698368] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34) <7>[ 14.698472] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers <7>[ 14.698581] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7>[ 14.698684] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366) <7>[ 14.698785] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305) <7>[ 14.698881] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 98, min size 78) <7>[ 14.698978] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7>[ 14.699073] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210) <7>[ 14.699167] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 14.699292] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7>[ 14.699392] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Expected child device config size for VBT version 253 not known; assuming 39 <7>[ 14.699494] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7>[ 14.699595] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7>[ 14.699694] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 14.699791] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7>[ 14.699885] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 14.699980] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 14.700079] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7>[ 14.700177] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 14.700286] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 14.700381] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 14.700474] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 14.700567] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 14.700658] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 14.700755] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a <7>[ 14.700884] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 14.701079] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7>[ 14.701240] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 14.701446] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 14.701650] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7>[ 14.701785] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7>[ 14.701892] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 14.701999] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 14.702154] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <6>[ 14.702281] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem <7>[ 14.702295] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7>[ 14.702419] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B <7>[ 14.702529] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C <7>[ 14.702647] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D <7>[ 14.702861] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/mtl_dmc.bin <7>[ 14.703648] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7>[ 14.704403] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7>[ 14.704533] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x86fc0 <7>[ 14.704643] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7>[ 14.704749] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f004 = 0x42c0408 (EVT_HTP) <7>[ 14.704853] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL) <7>[ 14.704965] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x8f008 = 0x534052f4 (EVT_HTP) <7>[ 14.705113] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 1: <7>[ 14.705237] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f074 = 0x96fc0 <7>[ 14.705337] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling) <7>[ 14.705436] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f004 = 0x212c20f4 (EVT_HTP) <7>[ 14.705532] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling) <7>[ 14.705627] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f008 = 0x222021e8 (EVT_HTP) <7>[ 14.705721] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 14.705815] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f00c = 0x23f422dc (EVT_HTP) <7>[ 14.705743] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us <7>[ 14.705928] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[7]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 14.706041] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[8]: 0x5f010 = 0x26ec26c0 (EVT_HTP) <7>[ 14.706152] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 2: <7>[ 14.706284] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f474 = 0x9efc0 <7>[ 14.706385] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling) <7>[ 14.706229] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 7 (7.0 usec) <7>[ 14.706480] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f404 = 0xa618a5e0 (EVT_HTP) <7>[ 14.706576] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling) <7>[ 14.706670] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f408 = 0xa70ca6d4 (EVT_HTP) <7>[ 14.706763] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 14.706657] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 91 (91.0 usec) <7>[ 14.706854] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f40c = 0xa8e0a7c8 (EVT_HTP) <7>[ 14.706946] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[7]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 14.707045] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[8]: 0x5f410 = 0xabd8abac (EVT_HTP) <7>[ 14.707144] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 3: <7>[ 14.707044] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 92 (92.0 usec) <7>[ 14.707247] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f874 = 0x53fc0 <7>[ 14.707341] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 14.707462] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f80c = 0x24a02388 (EVT_HTP) <7>[ 14.707432] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 107 (107.0 usec) <7>[ 14.707560] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 14.707656] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f810 = 0x2798276c (EVT_HTP) <7>[ 14.707754] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 4: <7>[ 14.707847] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5fc74 = 0x5afc0 <7>[ 14.707760] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 108 (108.0 usec) <7>[ 14.707939] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 14.708030] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5fc0c = 0x94a09388 (EVT_HTP) <7>[ 14.708121] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5fc40 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 14.708075] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 161 (161.0 usec) <7>[ 14.708227] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5fc10 = 0x9798976c (EVT_HTP) <6>[ 14.716959] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/mtl_dmc.bin (v2.21) <7>[ 14.728322] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 4 display pipes available. <7>[ 14.732239] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 14.733362] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz <7>[ 14.733640] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] Max dotclock rate: 1305600 kHz <7>[ 14.733932] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:235:DDI A/PHY A] Using AUX CH A (VBT) <7>[ 14.734164] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:235:DDI A/PHY A] <7>[ 14.734445] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7>[ 14.734668] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7>[ 14.734879] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7>[ 14.735073] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 14.735272] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7>[ 14.735451] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7>[ 14.735634] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7>[ 14.735810] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7>[ 14.735988] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 14.736207] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:235:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 14.736427] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000 <7>[ 14.736583] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7>[ 14.736725] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7>[ 14.736861] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7>[ 14.736993] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 14.737244] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 14.737522] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 14.739015] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on <7>[ 14.739254] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 14.740852] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 00 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 14.741627] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7>[ 14.742216] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 04 83 85 <7>[ 14.742910] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel <7>[ 14.743619] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 3 <7>[ 14.744839] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] PSR2 supported <7>[ 14.746975] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 14.753775] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 14.753787] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 14.753790] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 14.753828] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:236:eDP-1] using preferred EDID fixed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 14.754511] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:236:eDP-1] Performing OUI wait (0 ms) <7>[ 14.755187] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:236:eDP-1] DRRS type: none <7>[ 14.755349] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:236:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 14.755479] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:236:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 14.755619] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000 <7>[ 14.755726] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7>[ 14.755824] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7>[ 14.755918] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7>[ 14.756008] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 14.756217] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 14.756580] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:244:DDI B/PHY B] Using AUX CH B (VBT) <7>[ 14.756719] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:244:DDI B/PHY B] <6>[ 14.756859] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <7>[ 14.757022] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7>[ 14.759771] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel <7>[ 14.761241] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:244:DDI B/PHY B] <7>[ 14.761347] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:244:DDI B/PHY B] Using DDC pin 0x2 (VBT) <7>[ 14.761523] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:262:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7>[ 14.761735] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 14.761922] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:262:DDI TC1/PHY TC1] <6>[ 14.762589] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <6>[ 14.768231] intel-lpss 0000:00:19.1: enabling device (0000 -> 0002) <7>[ 14.782751] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -6 <7>[ 14.782777] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel <7>[ 14.804543] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -6 <7>[ 14.804620] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:271:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7>[ 14.805155] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port E/TC#2: PHY mode: disconnected (ready: yes, owned: no, HPD: disconnected) <7>[ 14.805781] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7>[ 14.806735] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) <7>[ 14.807114] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:271:DDI TC2/PHY TC2] <7>[ 14.807509] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:271:DDI TC2/PHY TC2] Using DDC pin 0xa (VBT) <7>[ 14.808005] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:275:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7>[ 14.808459] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port F/TC#3: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 14.808921] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:275:DDI TC3/PHY TC3] <7>[ 14.832270] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC3/DDI TC3/PHY TC3: Too many retries, giving up. First error: -6 <7>[ 14.832293] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel <6>[ 14.832902] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <6>[ 14.835693] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <7>[ 14.853693] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC3/DDI TC3/PHY TC3: Too many retries, giving up. First error: -6 <7>[ 14.853787] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:284:DDI TC4/PHY TC4] Using AUX CH USBC4 (VBT) <7>[ 14.854030] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port G/TC#4: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 14.854222] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:284:DDI TC4/PHY TC4] <7>[ 14.875953] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC4/DDI TC4/PHY TC4: Too many retries, giving up. First error: -6 <7>[ 14.875966] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel <7>[ 14.898056] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC4/DDI TC4/PHY TC4: Too many retries, giving up. First error: -6 <7>[ 14.899454] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe A] hw state readout: enabled <7>[ 14.900363] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:131:pipe B] hw state readout: disabled <7>[ 14.901239] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:182:pipe C] hw state readout: disabled <7>[ 14.902059] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:233:pipe D] hw state readout: disabled <7>[ 14.902461] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: enabled, pipe A <7>[ 14.902831] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] hw state readout: disabled, pipe A <7>[ 14.903224] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] hw state readout: disabled, pipe A <7>[ 14.903575] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] hw state readout: disabled, pipe A <7>[ 14.903917] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] hw state readout: disabled, pipe A <7>[ 14.904289] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] hw state readout: disabled, pipe A <7>[ 14.904637] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] hw state readout: disabled, pipe B <7>[ 14.904979] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] hw state readout: disabled, pipe B <7>[ 14.905462] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] hw state readout: disabled, pipe B <7>[ 14.905694] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] hw state readout: disabled, pipe B <7>[ 14.905879] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] hw state readout: disabled, pipe B <7>[ 14.906042] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] hw state readout: disabled, pipe B <7>[ 14.906208] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] hw state readout: disabled, pipe C <7>[ 14.906400] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] hw state readout: disabled, pipe C <7>[ 14.906548] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] hw state readout: disabled, pipe C <7>[ 14.906691] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] hw state readout: disabled, pipe C <7>[ 14.906830] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] hw state readout: disabled, pipe C <7>[ 14.906966] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] hw state readout: disabled, pipe C <7>[ 14.907101] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] hw state readout: disabled, pipe D <7>[ 14.907249] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] hw state readout: disabled, pipe D <7>[ 14.907386] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] hw state readout: disabled, pipe D <7>[ 14.907520] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] hw state readout: disabled, pipe D <7>[ 14.907653] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] hw state readout: disabled, pipe D <7>[ 14.907787] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] hw state readout: disabled, pipe D <7>[ 14.908838] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 14.909396] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:235:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 14.909817] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:244:DDI B/PHY B] hw state readout: disabled, pipe A <7>[ 14.910240] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:246:DP-MST A] hw state readout: disabled, pipe A <7>[ 14.910623] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:247:DP-MST B] hw state readout: disabled, pipe B <7>[ 14.910985] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:248:DP-MST C] hw state readout: disabled, pipe C <7>[ 14.911374] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:249:DP-MST D] hw state readout: disabled, pipe D <7>[ 14.911877] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port D/TC#1: sanitize mode (disconnected) <7>[ 14.912274] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:262:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 14.912634] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:264:DP-MST A] hw state readout: disabled, pipe A <7>[ 14.912974] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:265:DP-MST B] hw state readout: disabled, pipe B <7>[ 14.913339] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:266:DP-MST C] hw state readout: disabled, pipe C <7>[ 14.913666] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:267:DP-MST D] hw state readout: disabled, pipe D <7>[ 14.914092] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port E/TC#2: sanitize mode (disconnected) <7>[ 14.914510] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:271:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 14.914915] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port F/TC#3: sanitize mode (disconnected) <7>[ 14.915310] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:275:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 14.915648] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:277:DP-MST A] hw state readout: disabled, pipe A <7>[ 14.915973] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:278:DP-MST B] hw state readout: disabled, pipe B <7>[ 14.916342] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:279:DP-MST C] hw state readout: disabled, pipe C <7>[ 14.916673] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:280:DP-MST D] hw state readout: disabled, pipe D <7>[ 14.917051] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port G/TC#4: sanitize mode (disconnected) <7>[ 14.917437] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:284:DDI TC4/PHY TC4] hw state readout: disabled, pipe A <7>[ 14.917783] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:286:DP-MST A] hw state readout: disabled, pipe A <7>[ 14.918111] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:287:DP-MST B] hw state readout: disabled, pipe B <7>[ 14.918496] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:288:DP-MST C] hw state readout: disabled, pipe C <7>[ 14.918827] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:289:DP-MST D] hw state readout: disabled, pipe D <7>[ 14.919522] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:236:eDP-1] hw state readout: enabled <7>[ 14.919946] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:245:DP-1] hw state readout: disabled <7>[ 14.920354] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:257:HDMI-A-1] hw state readout: disabled <7>[ 14.920728] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:263:DP-2] hw state readout: disabled <7>[ 14.921087] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:272:HDMI-A-2] hw state readout: disabled <7>[ 14.921479] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:276:DP-3] hw state readout: disabled <7>[ 14.921835] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:285:DP-4] hw state readout: disabled <7>[ 14.922296] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 256910 kHz <7>[ 14.922618] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] min_cdclk 0 kHz <7>[ 14.922924] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] min_cdclk 0 kHz <7>[ 14.923229] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] min_cdclk 0 kHz <7>[ 14.923486] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] min_cdclk 0 kHz <7>[ 14.923741] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] min_cdclk 0 kHz <7>[ 14.923994] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 2055280 num active planes 1 <7>[ 14.924349] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] min_cdclk 0 kHz <7>[ 14.924644] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] min_cdclk 0 kHz <7>[ 14.924918] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] min_cdclk 0 kHz <7>[ 14.925197] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] min_cdclk 0 kHz <7>[ 14.925461] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] min_cdclk 0 kHz <7>[ 14.925721] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] min_cdclk 0 kHz <7>[ 14.925979] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7>[ 14.926327] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] min_cdclk 0 kHz <7>[ 14.926574] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] min_cdclk 0 kHz <7>[ 14.926797] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] min_cdclk 0 kHz <7>[ 14.927018] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] min_cdclk 0 kHz <7>[ 14.927259] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] min_cdclk 0 kHz <7>[ 14.927462] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] min_cdclk 0 kHz <7>[ 14.927662] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7>[ 14.927871] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] min_cdclk 0 kHz <7>[ 14.928034] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] min_cdclk 0 kHz <7>[ 14.928203] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] min_cdclk 0 kHz <7>[ 14.928368] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] min_cdclk 0 kHz <7>[ 14.928531] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] min_cdclk 0 kHz <7>[ 14.928701] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] min_cdclk 0 kHz <7>[ 14.928854] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe D data rate 0 num active planes 0 <7>[ 14.929318] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [setup_hw_state] <7>[ 14.929503] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 14.929680] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 14.929851] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 14.930019] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 14.930176] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 14.930341] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 14.930483] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 623587, link_n: 524288, tu: 64 <7>[ 14.930623] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 14.930759] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7>[ 14.930893] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7>[ 14.931025] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: disabled, psr2: disabled, panel replay: disabled, selective fetch: disabled <7>[ 14.931156] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 14.931306] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 14.931440] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 14.931559] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 14.931678] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 14.931799] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 14.931932] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 14.932048] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 14.932163] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 14.932292] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 14.932410] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 14.932524] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 14.932638] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 14.932752] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000 <7>[ 14.932890] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 14.933008] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 14.933106] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 14.933212] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 14.933312] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 14.933411] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 14.933510] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 14.933607] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 14.933703] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 14.933799] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 14.933894] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 14.933988] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 14.934091] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:131:pipe B] enable: no [setup_hw_state] <7>[ 14.934195] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:182:pipe C] enable: no [setup_hw_state] <7>[ 14.934294] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:233:pipe D] enable: no [setup_hw_state] <7>[ 14.934606] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:80:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 14.934730] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:131:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 14.934837] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:182:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 14.934937] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:233:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 14.935222] i915 0000:00:02.0: [drm:skl_get_initial_plane_config [i915]] pipe A/plane 1A with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800 <7>[ 14.935336] i915 0000:00:02.0: [drm:intel_plane_disable_noatomic [i915]] Disabling [PLANE:31:plane 1A] on [CRTC:80:pipe A] <7>[ 14.942048] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [2048K, 832K) <7>[ 14.952287] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [1040K, 832K) <7>[ 14.952447] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000] <7>[ 14.952570] i915 0000:00:02.0: [drm:i915_gem_init [i915]] No clock gating settings or workarounds applied. <7>[ 14.952730] MCR Steering: L3BANK steering: group=0x0, instance=0x0 <7>[ 14.952733] MCR Steering: DSS steering: group=0x0, instance=0x0 <7>[ 14.952734] MCR Steering: INSTANCE 0 steering: group=0x0, instance=0x0 <7>[ 14.952742] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 4 GT workarounds on global <7>[ 14.954750] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 6 engine workarounds on rcs'0 <7>[ 14.954886] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 whitelist workarounds on rcs'0 <7>[ 14.955003] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 6 context workarounds on rcs'0 <7>[ 14.955830] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 engine workarounds on bcs'0 <7>[ 14.955949] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 context workarounds on bcs'0 <7>[ 14.957084] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 engine workarounds on ccs'0 <7>[ 14.957217] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 context workarounds on ccs'0 <7>[ 14.958425] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 14.958572] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 24 ext-regs. <7>[ 14.958709] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7>[ 14.973463] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xd104f <7>[ 14.973593] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x400000 <7>[ 14.973705] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4 <7>[ 14.973814] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7>[ 14.973921] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x9a4 <7>[ 14.974026] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x7d550008 <7>[ 14.974129] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7>[ 14.974256] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7>[ 14.974362] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7>[ 14.974464] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7>[ 14.974564] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7>[ 14.974662] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7>[ 14.974758] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7>[ 14.974853] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <6>[ 14.975523] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/mtl_guc_70.bin version 70.20.0 <7>[ 14.986980] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 9ms, freq = 1600MHz, before = 1650MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 14.987762] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6>[ 14.988983] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6>[ 14.988986] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <6>[ 14.989453] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled <7>[ 15.003487] MCR Steering: OADDRM steering: group=0x0, instance=0x0 <7>[ 15.003513] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 4 GT workarounds on global <7>[ 15.006303] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'0 <7>[ 15.006661] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'0 <7>[ 15.010022] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'2 <7>[ 15.010406] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'2 <7>[ 15.013071] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vecs'0 <7>[ 15.013467] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vecs'0 <7>[ 15.015967] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on other'6 <7>[ 15.016335] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on other'6 <7>[ 15.023015] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT1: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 15.023524] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT1: GUC: capture found 24 ext-regs. <7>[ 15.023951] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT1: GUC: Used 4 KB for temporary ADS regset <7>[ 15.040691] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 0] = 0xd0504f <7>[ 15.040827] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 1] = 0x600000 <7>[ 15.040943] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 2] = 0x4 <7>[ 15.041055] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 3] = 0x3 <7>[ 15.041165] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 4] = 0x220c <7>[ 15.041290] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 5] = 0x7d550008 <7>[ 15.041397] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 6] = 0x0 <7>[ 15.041502] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 7] = 0x0 <7>[ 15.041608] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 8] = 0x0 <7>[ 15.041711] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 9] = 0x0 <7>[ 15.041811] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[10] = 0x0 <7>[ 15.041908] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[11] = 0x0 <7>[ 15.042004] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[12] = 0x0 <7>[ 15.042098] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[13] = 0x0 <7>[ 15.042200] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT1: HuC: loaded by GSC = no <7>[ 15.043808] i915 0000:00:02.0: [drm:i915_gsc_proxy_component_bind [i915]] GT1: GSC proxy mei component bound <6>[ 15.043936] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops i915_gsc_proxy_component_ops [i915]) <6>[ 15.044415] i915 0000:00:02.0: [drm] GT1: GuC firmware i915/mtl_guc_70.bin version 70.20.0 <6>[ 15.044417] i915 0000:00:02.0: [drm] GT1: HuC firmware i915/mtl_huc_gsc.bin version 8.5.4 <7>[ 15.059271] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT1: GUC: init took 13ms, freq = 1300MHz, before = 950MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 15.059864] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled <6>[ 15.070216] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for clear media <6>[ 15.071089] i915 0000:00:02.0: [drm] GT1: GUC: submission enabled <6>[ 15.071095] i915 0000:00:02.0: [drm] GT1: GUC: SLPC enabled <6>[ 15.071369] i915 0000:00:02.0: [drm] GT1: GUC: RC enabled <7>[ 15.079992] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7>[ 15.080392] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7>[ 15.080691] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7>[ 15.080937] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'2 to vcs1 <7>[ 15.081231] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7>[ 15.081487] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed ccs'0 to ccs0 <7>[ 15.081727] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed other'6 to other0 <7>[ 15.082150] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 15.082798] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 15.083369] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 15.084126] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:236:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 15.084718] i915 0000:00:02.0: [drm:intel_dp_compute_config_link_bpp_limits [i915]] [ENCODER:235:DDI A/PHY A][CRTC:80:pipe A] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 max link_bpp 30.0000 <7>[ 15.085080] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30 <7>[ 15.085432] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 1926825 available 2160000 <7>[ 15.085757] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 15.086139] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:235:DDI A/PHY A] [CRTC:80:pipe A] <7>[ 15.086535] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 623587/524288, found tu 64, data 7483046/8388608 link 498869/524288) <7>[ 15.086902] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 15.087287] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in port_clock (expected 432000, found 540000) <7>[ 15.087719] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7>[ 15.088099] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 15.088402] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 15.088745] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 2048) -> ( 0 - 0), size 2048 -> 0 <7>[ 15.088999] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95 <7>[ 15.089262] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 15.089508] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 2, 2, 2, 2, 2, 2, 0, 0, 1, 3, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 15.089737] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 49, 49, 49, 49, 49, 49, 0, 0, 7, 73, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 15.089935] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 15.090138] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 15.090360] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 15.090556] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 15.090747] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 15.090934] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 15.091121] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 15.091342] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 15.091538] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 15.091728] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 15.091884] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 15.092036] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 15.092227] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 15.092390] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 15.092549] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 15.092731] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 15.092886] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 15.093018] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 15.093150] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 15.093317] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 15.093452] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <6>[ 15.093621] i915 0000:00:02.0: [drm] Selective fetch area calculation failed in pipe A <7>[ 15.093625] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [modeset] <7>[ 15.093811] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 15.093983] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 15.094150] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 15.094348] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 15.094509] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 15.094666] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 15.094800] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 15.094937] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 15.095076] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7>[ 15.095265] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7>[ 15.095417] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, psr2: enabled, panel replay: disabled, selective fetch: enabled <7>[ 15.095554] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 15.095687] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 15.095821] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0 <7>[ 15.095823] i915 0000:00:02.0: pixelformat: RGB <7>[ 15.095825] i915 0000:00:02.0: colorimetry: sRGB <7>[ 15.095826] i915 0000:00:02.0: bpc: 0 <7>[ 15.095828] i915 0000:00:02.0: dynamic range: VESA range <7>[ 15.095830] i915 0000:00:02.0: content type: Not defined <7>[ 15.095832] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 15.095966] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 15.096091] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 15.096221] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 15.096335] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 15.096448] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 15.096563] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 15.096677] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 15.096787] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 15.096897] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 15.097007] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 15.097119] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x83d60, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 15.097252] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 15.097352] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 15.097448] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 15.097543] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 15.097638] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 15.097736] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 15.097831] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 15.097926] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 15.098019] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 15.098110] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 15.098215] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 15.098312] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 15.098408] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no <7>[ 15.098502] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7>[ 15.098595] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7>[ 15.098687] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7>[ 15.098777] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7>[ 15.098868] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7>[ 15.099173] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <6>[ 15.225765] i915 0000:00:02.0: [drm] GT1: Loaded GSC firmware i915/mtl_gsc_1.bin (cv1.0, r102.0.0.1655, svn 1) <6>[ 15.246116] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for all workloads <7>[ 15.307309] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:236:eDP-1] set backlight PWM = 0 <7>[ 15.307876] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7>[ 15.317740] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turn panel power off <7>[ 15.317912] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 15.318097] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 15.369214] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 15.369880] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7>[ 15.371090] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0xffff0072 0x13421c72) <7>[ 15.371557] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI A/PHY A] <7>[ 15.371932] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:244:DDI B/PHY B] <7>[ 15.372312] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:246:DP-MST A] <7>[ 15.372649] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DP-MST B] <7>[ 15.372996] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:248:DP-MST C] <7>[ 15.373336] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST D] <7>[ 15.373646] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:262:DDI TC1/PHY TC1] <7>[ 15.373950] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:264:DP-MST A] <7>[ 15.374277] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST B] <7>[ 15.374587] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST C] <7>[ 15.374890] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST D] <7>[ 15.375206] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DDI TC2/PHY TC2] <7>[ 15.375500] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DDI TC3/PHY TC3] <7>[ 15.375788] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST A] <7>[ 15.376072] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:278:DP-MST B] <7>[ 15.376428] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST C] <7>[ 15.376730] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST D] <7>[ 15.377034] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DDI TC4/PHY TC4] <7>[ 15.377378] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:286:DP-MST A] <7>[ 15.377668] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:287:DP-MST B] <7>[ 15.377952] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:288:DP-MST C] <7>[ 15.378246] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DP-MST D] <7>[ 15.378575] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 15.379120] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 15.380387] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turn panel power on <7>[ 15.380753] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power cycle <7>[ 15.694711] i915 0000:00:02.0: [drm:gsc_work [i915]] GT1: GSC Proxy initialized <7>[ 16.027644] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7>[ 16.028123] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 16.028591] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 16.029018] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 16.230025] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 16.232830] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on <7>[ 16.233308] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 16.237157] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 16.238558] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 16.240127] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07 <7>[ 16.242078] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 16.243312] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 16.245489] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 16.245866] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7>[ 16.248335] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 16.248685] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7>[ 16.249857] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7>[ 16.250732] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7>[ 16.251063] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7>[ 16.251487] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:236:eDP-1] set backlight PWM = 192000 <7>[ 16.261863] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 16.262797] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:eDP-1] <7>[ 16.263435] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7>[ 16.266474] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 16.268021] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0x71 0x13421c72) <7>[ 16.269428] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [PLANE:31:plane 1A] no fb, skipping <7>[ 16.269794] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:131:pipe B] not active, skipping <7>[ 16.270106] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:182:pipe C] not active, skipping <7>[ 16.270394] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:233:pipe D] not active, skipping <7>[ 16.270649] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7>[ 16.270926] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 16.288781] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:236:eDP-1] backlight device intel_backlight registered <7>[ 16.289441] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 16.291261] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:236:eDP-1] generating connector hotplug event <7>[ 16.291968] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7>[ 16.293344] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:245:DP-1] generating connector hotplug event <7>[ 16.293912] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:257:HDMI-A-1] generating connector hotplug event <7>[ 16.294515] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-2 <7>[ 16.295448] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:263:DP-2] generating connector hotplug event <7>[ 16.295877] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:272:HDMI-A-2] generating connector hotplug event <7>[ 16.296381] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 16.297230] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:276:DP-3] generating connector hotplug event <7>[ 16.297798] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY TC4 bus for card0-DP-4 <7>[ 16.298840] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:285:DP-4] generating connector hotplug event <6>[ 16.298927] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0 <7>[ 16.303304] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 7 outputs detected <6>[ 16.325449] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 16.328187] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 <6>[ 16.329614] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <7>[ 16.329566] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 16.329698] i915 0000:00:02.0: [drm:intel_audio_init [i915]] aud_ts_cdclk set to M=60, N=768 <7>[ 16.330117] i915 display info: display version: 14 <7>[ 16.330119] i915 display info: cursor_needs_physical: no <7>[ 16.330120] i915 display info: has_cdclk_crawl: yes <7>[ 16.330121] i915 display info: has_cdclk_squash: yes <7>[ 16.330122] i915 display info: has_ddi: yes <7>[ 16.330123] i915 display info: has_dp_mst: yes <7>[ 16.330124] i915 display info: has_dsb: yes <7>[ 16.330125] i915 display info: has_fpga_dbg: yes <7>[ 16.330125] i915 display info: has_gmch: no <7>[ 16.330126] i915 display info: has_hotplug: yes <7>[ 16.330127] i915 display info: has_hti: no <7>[ 16.330128] i915 display info: has_ipc: yes <7>[ 16.330129] i915 display info: has_overlay: no <7>[ 16.330130] i915 display info: has_psr: yes <7>[ 16.330131] i915 display info: has_psr_hw_tracking: no <7>[ 16.330132] i915 display info: overlay_needs_physical: no <7>[ 16.330133] i915 display info: supports_tv: no <7>[ 16.330133] i915 display info: has_hdcp: yes <7>[ 16.330134] i915 display info: has_dmc: yes <7>[ 16.330135] i915 display info: has_dsc: yes <7>[ 16.330272] [drm:drm_client_modeset_probe] <7>[ 16.330689] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] <7>[ 16.330724] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 16.332372] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7>[ 16.332514] i915 device info: pciid=0x7d55 rev=0x08 platform=METEORLAKE (subplatform=0x0) gen=12 <7>[ 16.332517] i915 device info: graphics version: 12.71 <7>[ 16.332519] i915 device info: media version: 13 <7>[ 16.332520] i915 device info: graphics stepping: B0 <7>[ 16.332521] i915 device info: media stepping: C0 <7>[ 16.332522] i915 device info: display stepping: C0 <7>[ 16.332524] i915 device info: base die stepping: ** <7>[ 16.332525] i915 device info: gt: 0 <7>[ 16.332526] i915 device info: memory-regions: 0x41 <7>[ 16.332527] i915 device info: page-sizes: 0x211000 <7>[ 16.332528] i915 device info: platform: METEORLAKE <7>[ 16.332530] i915 device info: ppgtt-size: 48 <7>[ 16.332531] i915 device info: ppgtt-type: 2 <7>[ 16.332532] i915 device info: dma_mask_size: 46 <7>[ 16.332533] i915 device info: is_mobile: no <7>[ 16.332534] i915 device info: is_lp: no <7>[ 16.332535] i915 device info: require_force_probe: no <7>[ 16.332537] i915 device info: is_dgfx: no <7>[ 16.332538] i915 device info: has_64bit_reloc: yes <7>[ 16.332539] i915 device info: has_64k_pages: no <7>[ 16.332540] i915 device info: gpu_reset_clobbers_display: no <7>[ 16.332541] i915 device info: has_reset_engine: yes <7>[ 16.332542] i915 device info: has_3d_pipeline: yes <7>[ 16.332544] i915 device info: has_flat_ccs: no <7>[ 16.332545] i915 device info: has_global_mocs: yes <7>[ 16.332546] i915 device info: has_gmd_id: yes <7>[ 16.332547] i915 device info: has_gt_uc: yes <7>[ 16.332548] i915 device info: has_heci_pxp: no <7>[ 16.332549] i915 device info: has_heci_gscfi: no <7>[ 16.332551] i915 device info: has_guc_deprivilege: yes <7>[ 16.332552] i915 device info: has_guc_tlb_invalidation: yes <7>[ 16.332553] i915 device info: has_l3_ccs_read: no <7>[ 16.332554] i915 device info: has_l3_dpf: no <7>[ 16.332555] i915 device info: has_llc: no <7>[ 16.332556] i915 device info: has_logical_ring_contexts: yes <7>[ 16.332558] i915 device info: has_logical_ring_elsq: yes <7>[ 16.332559] i915 device info: has_media_ratio_mode: no <7>[ 16.332560] i915 device info: has_mslice_steering: no <7>[ 16.332561] i915 device info: has_oa_bpc_reporting: yes <7>[ 16.332562] i915 device info: has_oa_slice_contrib_limits: yes <7>[ 16.332563] i915 device info: has_oam: yes <7>[ 16.332565] i915 device info: has_one_eu_per_fuse_bit: no <7>[ 16.332566] i915 device info: has_pxp: yes <7>[ 16.332567] i915 device info: has_rc6: yes <7>[ 16.332568] i915 device info: has_rc6p: no <7>[ 16.332569] i915 device info: has_rps: yes <7>[ 16.332570] i915 device info: has_runtime_pm: yes <7>[ 16.332571] i915 device info: has_snoop: yes <7>[ 16.332572] i915 device info: has_coherent_ggtt: no <7>[ 16.332574] i915 device info: tuning_thread_rr_after_dep: no <7>[ 16.332575] i915 device info: unfenced_needs_alignment: no <7>[ 16.332576] i915 device info: hws_needs_physical: no <7>[ 16.332577] i915 device info: has_pooled_eu: no <7>[ 16.332578] i915 device info: rawclk rate: 38400 kHz <7>[ 16.332580] i915 device info: iommu: enabled <7>[ 16.332581] i915 device info: available engines: 400003 <7>[ 16.332583] i915 device info: subslice total: 8 <7>[ 16.332584] i915 device info: geometry dss mask=00000000,000000ff <7>[ 16.332586] i915 device info: compute dss mask=00000000,000000ff <7>[ 16.332587] i915 device info: EU total: 128 <7>[ 16.332589] i915 device info: EU per subslice: 16 <7>[ 16.332590] i915 device info: has slice power gating: no <7>[ 16.332591] i915 device info: has subslice power gating: no <7>[ 16.332592] i915 device info: has EU power gating: no <7>[ 16.332593] i915 device info: available engines: 4041400 <7>[ 16.332595] i915 device info: subslice total: 8 <7>[ 16.332596] i915 device info: geometry dss mask=00000000,0000ff00 <7>[ 16.332597] i915 device info: compute dss mask=00000000,0000ff00 <7>[ 16.332598] i915 device info: EU total: 128 <7>[ 16.332599] i915 device info: EU per subslice: 16 <7>[ 16.332600] i915 device info: has slice power gating: no <7>[ 16.332602] i915 device info: has subslice power gating: no <7>[ 16.332603] i915 device info: has EU power gating: no <6>[ 16.332604] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6>[ 16.332605] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6>[ 16.332607] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7>[ 16.332791] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 16.334115] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 16.334537] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 16.334880] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 16.335216] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 16.335763] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 16.335778] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 16.335789] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 16.335856] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 16.336226] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 16.337575] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 16.337941] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 16.339201] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] status updated from unknown to connected <7>[ 16.339643] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes : <7>[ 16.339658] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 16.339673] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1] <7>[ 16.339686] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 16.340266] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1] status updated from unknown to disconnected <7>[ 16.340286] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1] disconnected <7>[ 16.340296] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] <7>[ 16.340308] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 16.340795] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] status updated from unknown to disconnected <7>[ 16.340813] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 16.340822] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:DP-2] <7>[ 16.340832] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 16.341495] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:DP-2] status updated from unknown to disconnected <7>[ 16.341512] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:DP-2] disconnected <7>[ 16.341521] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:272:HDMI-A-2] <7>[ 16.341532] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 16.342085] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:272:HDMI-A-2] status updated from unknown to disconnected <7>[ 16.342101] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 16.342110] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:276:DP-3] <7>[ 16.342120] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 16.343213] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:276:DP-3] status updated from unknown to disconnected <7>[ 16.343245] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:276:DP-3] disconnected <7>[ 16.343258] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:285:DP-4] <7>[ 16.343271] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 16.343862] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:285:DP-4] status updated from unknown to disconnected <7>[ 16.343881] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:285:DP-4] disconnected <7>[ 16.343890] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 16.343899] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 16.343905] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 16.343912] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 16.343918] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 16.343924] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 16.343930] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 16.344142] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 16.344177] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 16.344204] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 16.344211] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 16.344217] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 16.344255] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 16.344472] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6>[ 16.344544] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) <7>[ 16.344575] i915 0000:00:02.0: [drm:intelfb_create [i915]] no BIOS fb, allocating a new one <7>[ 16.346268] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 16.359043] i915 0000:00:02.0: [drm:intelfb_create [i915]] allocated 2880x1800 fb: 0x01e00000 <6>[ 16.360669] fbcon: i915drmfb (fb0) is primary device <7>[ 16.362496] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:236:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 16.362943] i915 0000:00:02.0: [drm:intel_dp_compute_config_link_bpp_limits [i915]] [ENCODER:235:DDI A/PHY A][CRTC:80:pipe A] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 max link_bpp 30.0000 <7>[ 16.363320] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30 <7>[ 16.363628] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 1926825 available 2160000 <7>[ 16.363938] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 16.364300] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:235:DDI A/PHY A] [CRTC:80:pipe A] <7>[ 16.364683] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001 <7>[ 16.365015] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 16.365408] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 <7>[ 16.365653] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 <7>[ 16.365876] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 <7>[ 16.366096] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 2055280 num active planes 1 <7>[ 16.366395] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200 <7>[ 16.366663] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 16.366926] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 16.367158] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 16.367405] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159 <7>[ 16.367647] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (40143 kHz) > old min cdclk (0 kHz) <7>[ 16.367891] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [fastset] <7>[ 16.368111] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 16.368313] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 16.368509] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 16.368695] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 16.368876] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 16.369055] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 16.369243] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 16.369416] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 16.369573] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7>[ 16.369735] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7>[ 16.369895] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, psr2: enabled, panel replay: disabled, selective fetch: enabled <7>[ 16.370053] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 16.370219] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 16.370375] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0 <7>[ 16.370377] i915 0000:00:02.0: pixelformat: RGB <7>[ 16.370379] i915 0000:00:02.0: colorimetry: sRGB <7>[ 16.370380] i915 0000:00:02.0: bpc: 0 <7>[ 16.370382] i915 0000:00:02.0: dynamic range: VESA range <7>[ 16.370383] i915 0000:00:02.0: content type: Not defined <7>[ 16.370385] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 16.370544] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 16.370685] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 16.370830] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 16.370969] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 16.371113] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 16.371266] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 16.371405] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 16.371540] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 16.371677] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 16.371802] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 16.371922] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x83d60, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 16.372064] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 16.372195] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 16.372315] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 16.372436] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 16.372557] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 16.372672] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 16.372795] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 16.372915] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 16.373031] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 16.373154] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 16.373290] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 16.373418] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 16.373544] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:237] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 16.373669] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 16.373772] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 16.373870] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7>[ 16.373970] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7>[ 16.374071] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7>[ 16.374175] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7>[ 16.374284] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7>[ 16.374598] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0x2000071 0x13421c72) <7>[ 16.374849] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI A/PHY A] <7>[ 16.374980] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:244:DDI B/PHY B] <7>[ 16.375084] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:246:DP-MST A] <7>[ 16.375202] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DP-MST B] <7>[ 16.375305] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:248:DP-MST C] <7>[ 16.375403] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST D] <7>[ 16.375501] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:262:DDI TC1/PHY TC1] <7>[ 16.375596] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:264:DP-MST A] <7>[ 16.375690] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST B] <7>[ 16.375782] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST C] <7>[ 16.375871] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST D] <7>[ 16.375959] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DDI TC2/PHY TC2] <7>[ 16.376046] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DDI TC3/PHY TC3] <7>[ 16.376132] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST A] <7>[ 16.376246] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:278:DP-MST B] <7>[ 16.376338] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST C] <7>[ 16.376427] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST D] <7>[ 16.376516] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DDI TC4/PHY TC4] <7>[ 16.376602] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:286:DP-MST A] <7>[ 16.376686] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:287:DP-MST B] <7>[ 16.376772] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:288:DP-MST C] <7>[ 16.376863] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DP-MST D] <7>[ 16.384065] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2 <7>[ 16.385736] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:eDP-1] <7>[ 16.385997] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7>[ 16.388255] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B <7>[ 16.388605] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C <7>[ 16.389028] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D <6>[ 16.389544] Console: switching to colour frame buffer device 360x112 <7>[ 16.395344] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 16.395686] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 16.395985] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 16.396297] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 16.396563] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 16.396811] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 16.397055] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <6>[ 16.397245] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7>[ 16.397320] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 16.397566] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 16.397804] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 16.398045] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 16.398283] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 16.398497] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 16.398709] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 16.398917] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 16.399124] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 16.399319] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 16.399507] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 16.399696] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 16.399881] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 16.400065] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 16.400258] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 16.400438] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 16.400615] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 16.400790] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 16.400947] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 16.401108] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 16.401282] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 16.401449] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 16.401609] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 16.401768] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 16.401926] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 16.402077] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 16.402223] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 16.402360] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 16.402495] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 16.418284] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0] <7>[ 16.418400] [drm:drm_client_modeset_probe] <7>[ 16.419117] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] <7>[ 16.419425] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <6>[ 16.421331] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input4 <7>[ 16.422056] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 16.423656] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <6>[ 16.424041] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5 <7>[ 16.424037] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 16.424486] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 16.424876] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <6>[ 16.425493] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <7>[ 16.425506] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 16.425519] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 16.425528] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 16.425583] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 16.425930] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <6>[ 16.427274] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <7>[ 16.427212] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 16.427519] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 16.428634] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes : <7>[ 16.428676] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 16.428686] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1] <7>[ 16.428694] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 16.429061] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1] disconnected <7>[ 16.429067] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] <7>[ 16.429072] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 16.429312] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 16.429316] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:DP-2] <7>[ 16.429320] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 16.429790] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:DP-2] disconnected <7>[ 16.429797] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:272:HDMI-A-2] <7>[ 16.429803] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 16.430145] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 16.430150] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:276:DP-3] <7>[ 16.430155] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 16.430473] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:276:DP-3] disconnected <7>[ 16.430478] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:285:DP-4] <7>[ 16.430482] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 16.430770] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:285:DP-4] disconnected <7>[ 16.430775] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 16.430780] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 16.430783] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 16.430785] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 16.430788] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 16.430790] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 16.430793] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 16.430934] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 16.430955] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 16.430958] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 16.430960] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 16.430963] [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 16.430995] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 16.440087] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0] <7>[ 16.440094] [drm:drm_client_modeset_probe] <7>[ 16.442434] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] <7>[ 16.442441] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 16.443400] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 16.444221] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 16.444349] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 16.444476] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 16.444600] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 16.444739] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 16.444744] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 16.444746] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 16.444758] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 16.444884] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 16.445875] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 16.445985] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 16.446745] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes : <7>[ 16.446750] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 16.446755] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1] <7>[ 16.446759] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 16.446890] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1] disconnected <7>[ 16.446895] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] <7>[ 16.446898] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 16.447036] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 16.447039] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:DP-2] <7>[ 16.447042] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 16.447216] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:DP-2] disconnected <7>[ 16.447219] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:272:HDMI-A-2] <7>[ 16.447223] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 16.447386] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 16.447389] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:276:DP-3] <7>[ 16.447392] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 16.447540] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:276:DP-3] disconnected <7>[ 16.447543] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:285:DP-4] <7>[ 16.447546] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 16.447697] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:285:DP-4] disconnected <7>[ 16.447700] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 16.447703] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 16.447705] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 16.447707] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 16.447709] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 16.447711] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 16.447713] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 16.447732] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 16.447739] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 16.447742] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 16.447744] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 16.447746] [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 16.447757] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 16.519727] i915 0000:00:02.0: [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=192000/192000 <7>[ 16.519916] i915 0000:00:02.0: [drm:intel_panel_actually_set_backlight [i915]] [CONNECTOR:236:eDP-1] set backlight level = 192000 <6>[ 17.391318] r8152 4-1:1.0 enxe2015072f492: carrier on <7>[ 19.484789] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD off <7>[ 19.485500] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067 <7>[ 20.166074] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7>[ 20.166910] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 20.167347] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 20.167709] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <6>[ 20.559235] systemd-udevd (299) used greatest stack depth: 11384 bytes left <6>[ 20.561967] systemd-udevd (288) used greatest stack depth: 11200 bytes left <7>[ 21.652075] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 21.652716] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7>[ 21.676243] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 21.676847] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 21.677261] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <5>[ 35.434471] systemd-journald[217]: Failed to set ACL on /var/log/journal/9a8a5729dd38de7a803effd961f12914/user-1001.journal, ignoring: Operation not supported <6>[ 35.688214] fuse: init (API version 7.39)