igt@i915_pm_rpm@module-reload on fi-kbl-x1275@linus-v6.8-rc7 Test details

Detail	Value
Duration	26.79 seconds
Igt-Version	IGT-Version: 1.28-g40ed74461 (x86_64) (Linux: 6.8.0-rc7-linus-v6.8-rc7-g90d35da658da+ x86_64)
Out	Using IGT_SRANDOM=1709500553 for randomisation Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: 0000:00:02.0@ffff888140f3b4b0 has 1/1 users at track_intel_runtime_pm_wakeref.part.0+0x30/0x60 [i915] __intel_display_power_put_async+0x3d/0x160 [i915] intel_atomic_commit_tail+0xaef/0xf80 [i915] intel_atomic_commit+0x321/0x370 [i915] drm_atomic_commit+0x95/0xc0 drm_atomic_helper_set_config+0x77/0xc0 drm_mode_setcrtc+0x1f7/0x740 drm_ioctl_kernel+0xab/0x100 drm_ioctl+0x223/0x430 __x64_sys_ioctl+0x7c/0xb0 do_syscall_64+0x72/0x140 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Starting subtest: module-reload Reloading i915 with disable_display=1 mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] Reloading i915 with mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: 0000:00:02.0@ffff88823be2b4b0 has 1/1 users at track_intel_runtime_pm_wakeref.part.0+0x30/0x60 [i915] __intel_display_power_put_async+0x3d/0x160 [i915] intel_atomic_commit_tail+0xaef/0xf80 [i915] intel_atomic_commit+0x321/0x370 [i915] drm_atomic_commit+0x95/0xc0 drm_atomic_helper_set_config+0x77/0xc0 drm_mode_setcrtc+0x1f7/0x740 drm_ioctl_kernel+0xab/0x100 drm_ioctl+0x223/0x430 __x64_sys_ioctl+0x7c/0xb0 do_syscall_64+0x72/0x140 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Subtest module-reload: SUCCESS (26.790s)
Err	Starting subtest: module-reload Subtest module-reload: SUCCESS (26.790s)
Dmesg	<6> [143.452808] [IGT] i915_pm_rpm: executing <7> [143.457469] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [143.458190] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [143.458197] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [143.458493] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [143.458556] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [143.458560] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [143.458740] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [143.460161] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [143.461025] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [143.461833] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [143.461882] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [143.461887] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [143.462519] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [143.462642] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [143.463034] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [143.463192] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [143.463196] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [143.463312] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [143.467564] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [143.467569] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [143.467696] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [143.471246] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [143.471252] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [143.471422] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [143.471870] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [143.471875] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [143.473166] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [143.474302] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [143.474969] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [143.475408] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [143.475413] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [143.475861] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [143.475987] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [143.476369] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [143.476522] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [143.476526] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [143.476638] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [143.480706] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [143.480710] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [143.480853] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [143.481172] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [143.481177] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [143.481336] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [143.481351] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [143.481355] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [143.482571] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [143.483281] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [143.483949] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [143.483967] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [143.483971] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [143.484395] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [143.484512] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [143.484892] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [143.485087] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [143.485091] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [143.485203] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [143.489215] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [143.489220] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [143.489344] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [143.604981] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [143.605579] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [143.606150] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [143.606607] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [143.607551] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [154.538590] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [154.547656] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [154.572928] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [154.580005] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [154.580666] [drm:drm_mode_setcrtc] [CRTC:51:pipe A] <7> [154.580885] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [154.581260] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [154.582138] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [154.584001] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [154.584742] [drm:drm_mode_setcrtc] [CRTC:72:pipe B] <7> [154.584703] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [154.585353] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [154.588033] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [154.589166] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [154.590026] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [154.590659] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [154.590808] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [154.591235] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [154.591390] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [154.591395] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [154.591508] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [154.595964] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [154.595969] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [154.596204] [drm:drm_mode_setcrtc] [CRTC:93:pipe C] <7> [154.708931] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [154.709251] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [154.709515] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [154.709771] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [154.710514] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [154.711541] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [154.715868] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [154.797460] [IGT] i915_pm_rpm: starting subtest module-reload <7> [154.919850] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [154.925294] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [154.925570] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [154.925957] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [154.926555] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [154.927168] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [154.927597] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [154.927865] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [154.928119] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [154.928370] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [154.928642] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [154.928958] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [154.930675] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [154.931834] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [154.932683] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [154.933307] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [154.933435] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [154.933874] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [154.934029] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [154.934035] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [154.934148] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [154.938600] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [154.938605] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [154.961042] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [155.009221] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <6> [155.236606] [IGT] Reloading i915 w/o display <7> [155.394679] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [155.394962] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [155.395120] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH <7> [155.395258] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [155.395442] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [155.395575] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz <7> [155.396248] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [155.396368] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [155.396480] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M <6> [155.396591] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [155.396595] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [155.396861] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [155.396885] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047 <7> [155.397036] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K <7> [155.397336] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018 <7> [155.397506] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [155.397652] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [155.397856] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [155.398044] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [155.402211] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [155.402360] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [155.402499] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [155.402638] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [155.402805] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [155.402985] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [155.403087] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [155.403187] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [155.403286] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [155.403385] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [155.403483] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [155.403581] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [155.403678] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [155.403783] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [155.404501] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [155.404669] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196 <7> [155.404890] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [155.405047] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [155.405203] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [155.405359] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [155.405515] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812) <7> [155.405669] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34) <7> [155.405833] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [155.406031] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [155.406187] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [155.406345] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [155.406496] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [155.406647] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [155.406805] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6 <7> [155.407032] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [155.407186] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [155.407341] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [155.407492] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [155.407645] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [155.407828] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [155.407996] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3 <7> [155.408149] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [155.408300] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3 <7> [155.408451] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [155.408616] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [155.408809] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [155.409015] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [155.409171] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [155.409676] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [155.409840] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [155.410089] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [155.410282] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [155.410434] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [155.410585] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [155.410746] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [155.410958] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [155.411127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [155.411280] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [155.411432] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [155.411617] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <7> [155.412057] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [155.412495] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [155.412645] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [155.413244] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [155.413403] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [155.413554] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [155.413704] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [155.413970] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [155.414177] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <6> [155.414296] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [155.414355] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [155.414498] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [155.414639] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [155.414815] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [155.415020] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [155.415161] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [155.416330] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [155.417281] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [155.417579] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] Using AUX CH A (VBT) <7> [155.417757] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A] <7> [155.420657] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [155.420903] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [155.421089] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [155.421247] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static <7> [155.421404] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [155.421557] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [155.421706] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [155.421908] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [155.422073] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [155.422224] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0 <7> [155.422374] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1 <7> [155.422568] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0 <7> [155.422760] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [155.422948] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [155.423136] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [155.423272] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [155.423407] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [155.423613] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [155.424040] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on <7> [155.424266] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [155.424554] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [155.424815] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [155.425056] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [155.425254] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [155.639788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [155.650788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [155.661789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [155.672789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [155.683787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [155.694788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [155.705788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [155.716789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [155.727787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [155.738788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [155.749788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [155.760790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [155.771787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [155.782787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [155.793788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [155.804790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [155.815787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [155.826788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [155.837790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [155.848789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [155.859787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [155.870788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [155.881787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [155.892790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [155.903788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [155.914787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [155.925788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [155.936789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [155.947788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [155.958788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [155.969787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [155.980790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [155.981003] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <6> [155.981016] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP <7> [155.981077] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off <7> [155.981283] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [155.981516] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] Using AUX CH B (VBT) <7> [155.981676] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B] <7> [155.992801] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.003787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.014788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.025788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.036790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.047787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.058787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.069789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.080787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.091787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.102788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.113787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.124788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.135786] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.146787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.157788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.168786] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.179787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.190788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.201787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.212788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.223789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.234788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.245788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.256789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.267787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.278787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.289788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.300786] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.311787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.322786] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.333787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.333998] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX B/DDI B/PHY B: Too many retries, giving up. First error: -110 <7> [156.334011] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel <7> [156.344788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.355787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.366788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.377790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.388787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.399788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.410789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.421789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.432788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.443788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.454788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.465789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.476787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.487788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.498789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.509789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.520788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.531788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.542789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.553790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.564787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.575788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.586789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.597790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.608788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.619787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.630789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.641790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.652787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.663788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.674789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.685790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [156.685998] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX B/DDI B/PHY B: Too many retries, giving up. First error: -110 <7> [156.686011] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [156.686173] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DDI C/PHY C] Using AUX CH C (VBT) <7> [156.686333] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C] <7> [156.687347] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel <7> [156.688355] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [156.688511] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C] <7> [156.688653] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:106:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [156.689030] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [156.689246] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [156.689457] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [156.689619] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [156.689792] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [156.689953] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [156.690128] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [156.690290] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [156.690451] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [156.690665] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [156.690943] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [156.691137] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [156.691301] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [156.691448] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A <7> [156.691593] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B <7> [156.691739] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C <7> [156.691912] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A <7> [156.692059] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A <7> [156.692204] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B <7> [156.692349] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C <7> [156.692510] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [156.692678] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [156.692851] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [156.693015] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [156.693221] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled <7> [156.693397] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled <7> [156.693571] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled <7> [156.693718] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [156.693870] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [156.694062] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [156.694208] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [156.694362] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [156.694509] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [156.694753] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [156.694984] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [156.695181] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [156.695332] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [156.695478] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [156.695622] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [156.695836] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [156.695990] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [156.696142] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [156.696294] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [156.696446] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [156.696594] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [156.696737] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [156.696917] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [156.697034] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [156.697159] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [156.697301] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 6 GT workarounds on global <7> [156.699338] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [156.699486] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [156.699625] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 14 context workarounds on rcs'0 <7> [156.711596] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [156.711735] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [156.712067] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [156.712184] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [156.712460] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [156.713139] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [156.713321] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [156.713461] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [156.713599] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [156.713752] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [156.717986] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [156.718635] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event <7> [156.719013] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [156.719561] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event <7> [156.719902] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event <6> [156.719945] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0 <7> [156.721323] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected <6> [156.733938] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [156.736029] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 <7> [156.736604] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [156.737623] i915 display info: display version: 9 <7> [156.737626] i915 display info: cursor_needs_physical: no <7> [156.737627] i915 display info: has_cdclk_crawl: no <7> [156.737629] i915 display info: has_cdclk_squash: no <7> [156.737630] i915 display info: has_ddi: yes <7> [156.737632] i915 display info: has_dp_mst: yes <7> [156.737633] i915 display info: has_dsb: no <7> [156.737631] [drm:drm_client_modeset_probe] <7> [156.737635] i915 display info: has_fpga_dbg: yes <7> [156.737636] i915 display info: has_gmch: no <7> [156.737638] i915 display info: has_hotplug: yes <7> [156.737639] i915 display info: has_hti: no <7> [156.737641] i915 display info: has_ipc: yes <7> [156.737642] i915 display info: has_overlay: no <7> [156.737643] i915 display info: has_psr: yes <7> [156.737645] i915 display info: has_psr_hw_tracking: yes <7> [156.737646] i915 display info: overlay_needs_physical: no <7> [156.737648] i915 display info: supports_tv: no <7> [156.737649] i915 display info: has_hdcp: yes <7> [156.737650] i915 display info: has_dmc: yes <7> [156.737652] i915 display info: has_dsc: no <7> [156.737676] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [156.737655] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [156.737687] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [156.737926] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] status updated from unknown to disconnected <7> [156.737942] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [156.737950] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [156.737859] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [156.737957] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [156.738101] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [156.738227] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] status updated from unknown to disconnected <7> [156.738240] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [156.738246] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [156.738252] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [156.738343] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [156.738463] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected <7> [156.738475] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [156.738480] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [156.738485] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [156.738489] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [156.738493] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [156.738510] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [156.738522] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [156.738542] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [156.738551] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [156.739071] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [156.739252] [drm:drm_client_modeset_probe] <7> [156.739289] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [156.739299] i915 device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9 <7> [156.739304] i915 device info: graphics version: 9 <7> [156.739306] i915 device info: media version: 9 <7> [156.739309] i915 device info: graphics stepping: F0 <7> [156.739312] i915 device info: media stepping: F0 <7> [156.739314] i915 device info: display stepping: C0 <7> [156.739317] i915 device info: base die stepping: <7> [156.739319] i915 device info: gt: 2 <7> [156.739322] i915 device info: memory-regions: 0x21 <7> [156.739325] i915 device info: page-sizes: 0x11000 <7> [156.739327] i915 device info: platform: KABYLAKE <7> [156.739330] i915 device info: ppgtt-size: 48 <7> [156.739332] i915 device info: ppgtt-type: 2 <7> [156.739335] i915 device info: dma_mask_size: 39 <7> [156.739338] i915 device info: is_mobile: no <7> [156.739340] i915 device info: is_lp: no <7> [156.739343] i915 device info: require_force_probe: no <7> [156.739345] i915 device info: is_dgfx: no <7> [156.739348] i915 device info: has_64bit_reloc: yes <7> [156.739351] i915 device info: has_64k_pages: no <7> [156.739353] i915 device info: gpu_reset_clobbers_display: no <7> [156.739356] i915 device info: has_reset_engine: yes <7> [156.739358] i915 device info: has_3d_pipeline: yes <7> [156.739361] i915 device info: has_flat_ccs: no <7> [156.739364] i915 device info: has_global_mocs: no <7> [156.739366] i915 device info: has_gmd_id: no <7> [156.739369] i915 device info: has_gt_uc: yes <7> [156.739371] i915 device info: has_heci_pxp: no <7> [156.739374] i915 device info: has_heci_gscfi: no <7> [156.739376] i915 device info: has_guc_deprivilege: no <7> [156.739379] i915 device info: has_guc_tlb_invalidation: no <7> [156.739381] i915 device info: has_l3_ccs_read: no <7> [156.739384] i915 device info: has_l3_dpf: no <7> [156.739386] i915 device info: has_llc: yes <7> [156.739389] i915 device info: has_logical_ring_contexts: yes <7> [156.739392] i915 device info: has_logical_ring_elsq: no <7> [156.739394] i915 device info: has_media_ratio_mode: no <7> [156.739397] i915 device info: has_mslice_steering: no <7> [156.739399] i915 device info: has_oa_bpc_reporting: no <7> [156.739402] i915 device info: has_oa_slice_contrib_limits: no <7> [156.739298] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [156.739404] i915 device info: has_oam: no <7> [156.739407] i915 device info: has_one_eu_per_fuse_bit: no <7> [156.739409] i915 device info: has_pxp: no <7> [156.739411] i915 device info: has_rc6: yes <7> [156.739413] i915 device info: has_rc6p: no <7> [156.739415] i915 device info: has_rps: yes <7> [156.739417] i915 device info: has_runtime_pm: yes <7> [156.739420] i915 device info: has_snoop: no <7> [156.739422] i915 device info: has_coherent_ggtt: yes <7> [156.739424] i915 device info: tuning_thread_rr_after_dep: no <7> [156.739426] i915 device info: unfenced_needs_alignment: no <7> [156.739428] i915 device info: hws_needs_physical: no <7> [156.739430] i915 device info: has_pooled_eu: no <7> [156.739432] i915 device info: rawclk rate: 24000 kHz <7> [156.739435] i915 device info: iommu: enabled <7> [156.739437] i915 device info: available engines: 40403 <7> [156.739440] i915 device info: slice total: 1, mask=0001 <7> [156.739442] i915 device info: subslice total: 3 <7> [156.739444] i915 device info: slice0: 3 subslices, mask=00000007 <7> [156.739447] i915 device info: slice1: 0 subslices, mask=00000000 <7> [156.739450] i915 device info: slice2: 0 subslices, mask=00000000 <7> [156.739452] i915 device info: EU total: 24 <7> [156.739454] i915 device info: EU per subslice: 8 <7> [156.739456] i915 device info: has slice power gating: no <7> [156.739458] i915 device info: has subslice power gating: no <7> [156.739461] i915 device info: has EU power gating: yes <6> [156.739463] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [156.739466] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [156.739468] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [156.739527] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [156.739535] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [156.739541] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [156.739752] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [156.739759] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [156.739765] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [156.739992] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [156.739999] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [156.740004] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [156.740008] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [156.740013] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [156.740044] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [156.740055] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [156.740074] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [156.740083] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [156.744881] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [156.893511] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [156.894588] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [156.895133] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [156.895626] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [156.896608] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [167.794594] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [167.804737] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [167.830105] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [167.840001] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [167.841355] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [167.842312] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [167.842930] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [167.843480] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [167.844062] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [167.845215] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [167.850092] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [168.047149] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [168.055960] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [168.056884] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [168.057476] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [168.057583] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [168.058029] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [168.058455] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [168.058542] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [168.059191] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [168.059813] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [168.060199] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [168.060582] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [168.060989] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [168.084151] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [168.124681] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <6> [168.336652] [IGT] Reloading i915 as normal <7> [168.475757] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [168.476025] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [168.476195] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH <7> [168.476345] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [168.476542] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [168.476687] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz <7> [168.477561] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [168.477755] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [168.477987] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M <6> [168.478174] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [168.478180] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [168.478500] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [168.478523] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047 <7> [168.478720] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K <7> [168.479290] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018 <7> [168.479525] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [168.479728] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [168.479995] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [168.480201] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [168.484248] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [168.484407] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [168.484557] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [168.484704] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [168.484921] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [168.485126] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [168.485289] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [168.485456] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [168.485616] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [168.485776] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [168.485977] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [168.486153] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [168.486309] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [168.486464] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [168.487175] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [168.487398] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196 <7> [168.487624] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [168.487922] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [168.488181] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [168.488405] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [168.488662] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812) <7> [168.488908] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34) <7> [168.489143] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [168.489363] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [168.489583] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [168.489829] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [168.490063] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [168.490277] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [168.490560] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6 <7> [168.490808] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [168.491047] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [168.491266] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [168.491479] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [168.491693] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [168.491937] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [168.492190] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3 <7> [168.492440] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [168.492658] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3 <7> [168.492919] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [168.493165] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [168.493421] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [168.493662] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [168.493944] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [168.494618] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [168.494900] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [168.495151] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [168.495425] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [168.495644] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [168.495907] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [168.496232] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [168.496487] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [168.496705] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [168.496981] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [168.497217] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [168.497508] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <7> [168.498079] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [168.498332] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [168.498511] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [168.498559] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [168.498661] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [168.498846] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [168.498813] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [168.499065] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [168.499101] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [168.499211] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [168.499353] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [168.499537] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <6> [168.499744] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [168.499730] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [168.499935] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [168.500105] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [168.501284] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [168.502719] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [168.503038] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] Using AUX CH A (VBT) <7> [168.503287] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A] <7> [168.505812] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [168.506010] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [168.506169] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [168.506373] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static <7> [168.506557] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [168.506711] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [168.506936] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [168.507140] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [168.507291] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [168.507442] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0 <7> [168.507592] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1 <7> [168.507813] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0 <7> [168.508070] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [168.508208] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [168.508343] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [168.508478] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [168.508615] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [168.508856] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [168.509217] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on <7> [168.509386] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [168.509594] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [168.509797] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [168.510109] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [168.510267] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [168.727789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [168.738789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [168.749792] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [168.760789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [168.771789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [168.782789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [168.793792] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [168.804789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [168.815789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [168.826790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [168.837790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [168.848789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [168.859788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [168.870788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [168.881790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [168.892788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [168.903788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [168.914788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [168.925790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [168.936788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [168.947788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [168.958789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [168.969789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [168.980788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [168.991788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [169.002788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [169.013791] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [169.024787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [169.035788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [169.046788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [169.057791] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [169.068788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [169.069003] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <6> [169.069016] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP <7> [169.069078] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off <7> [169.069284] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [169.069523] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] Using AUX CH B (VBT) <7> [169.069684] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B] <7> [169.080788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.091789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.102790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.113789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.124788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.135790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.146788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.157788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.168788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.179791] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.190788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.201788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.212790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.223790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.234788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.245788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.256788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.267790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.278788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.289788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.300788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.311790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.322788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.333788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.344788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.355790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.366788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.377788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.388788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.399790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.410789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.421814] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.422022] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX B/DDI B/PHY B: Too many retries, giving up. First error: -110 <7> [169.422036] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel <7> [169.432788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.443790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.454928] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.465790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.476788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.487788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.498788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.509790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.520788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.531788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.542788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.553791] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.564788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.575788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.586789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.597788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.608788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.619790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.630788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.641788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.652789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.663789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.674788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.685788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.696790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.707789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.718788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.729788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.740790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.751788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.762788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.773788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [169.774013] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX B/DDI B/PHY B: Too many retries, giving up. First error: -110 <7> [169.774025] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [169.774183] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DDI C/PHY C] Using AUX CH C (VBT) <7> [169.774337] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C] <7> [169.775444] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel <7> [169.776431] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [169.776589] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C] <7> [169.776732] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:106:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [169.777105] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [169.777317] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [169.777528] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [169.777690] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [169.777858] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [169.778084] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [169.778245] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [169.778494] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [169.778685] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [169.778882] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [169.779085] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [169.779245] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [169.779407] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [169.779553] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A <7> [169.779698] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B <7> [169.779849] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C <7> [169.780051] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A <7> [169.780196] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A <7> [169.780341] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B <7> [169.780485] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C <7> [169.780646] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [169.780847] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [169.781028] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [169.781192] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [169.781403] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled <7> [169.781587] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled <7> [169.781761] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled <7> [169.781975] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [169.782227] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [169.782374] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [169.782519] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [169.782673] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [169.782830] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [169.783018] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [169.783164] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [169.783317] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [169.783464] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [169.783609] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [169.783754] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [169.784008] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [169.784162] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [169.784313] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [169.784464] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [169.784615] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [169.784761] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [169.784931] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [169.785151] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [169.785271] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [169.785447] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [169.785667] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 6 GT workarounds on global <7> [169.787582] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [169.787727] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [169.787908] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 14 context workarounds on rcs'0 <7> [169.799712] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [169.799859] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [169.799979] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [169.800097] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [169.800358] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [169.800573] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [169.800725] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [169.800912] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [169.801109] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [169.801320] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [169.805067] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [169.805727] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event <7> [169.806069] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [169.806709] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event <7> [169.807053] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event <6> [169.807107] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0 <7> [169.808486] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected <6> [169.825017] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [169.828210] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8 <7> [169.829345] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [169.830060] i915 display info: display version: 9 <7> [169.830063] i915 display info: cursor_needs_physical: no <7> [169.830065] i915 display info: has_cdclk_crawl: no <7> [169.830066] i915 display info: has_cdclk_squash: no <7> [169.830068] i915 display info: has_ddi: yes <7> [169.830069] i915 display info: has_dp_mst: yes <7> [169.830068] [drm:drm_client_modeset_probe] <7> [169.830070] i915 display info: has_dsb: no <7> [169.830073] i915 display info: has_fpga_dbg: yes <7> [169.830074] i915 display info: has_gmch: no <7> [169.830076] i915 display info: has_hotplug: yes <7> [169.830077] i915 display info: has_hti: no <7> [169.830079] i915 display info: has_ipc: yes <7> [169.830080] i915 display info: has_overlay: no <7> [169.830081] i915 display info: has_psr: yes <7> [169.830083] i915 display info: has_psr_hw_tracking: yes <7> [169.830084] i915 display info: overlay_needs_physical: no <7> [169.830086] i915 display info: supports_tv: no <7> [169.830087] i915 display info: has_hdcp: yes <7> [169.830088] i915 display info: has_dmc: yes <7> [169.830090] i915 display info: has_dsc: no <7> [169.830114] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [169.830093] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [169.830124] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [169.830273] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [169.830433] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [169.830591] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [169.830881] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] status updated from unknown to disconnected <7> [169.830899] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [169.830906] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [169.830913] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [169.831192] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [169.831364] i915 device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9 <7> [169.831368] i915 device info: graphics version: 9 <7> [169.831369] i915 device info: media version: 9 <7> [169.831371] i915 device info: graphics stepping: F0 <7> [169.831373] i915 device info: media stepping: F0 <7> [169.831375] i915 device info: display stepping: C0 <7> [169.831376] i915 device info: base die stepping: <7> [169.831378] i915 device info: gt: 2 <7> [169.831379] i915 device info: memory-regions: 0x21 <7> [169.831381] i915 device info: page-sizes: 0x11000 <7> [169.831383] i915 device info: platform: KABYLAKE <7> [169.831385] i915 device info: ppgtt-size: 48 <7> [169.831386] i915 device info: ppgtt-type: 2 <7> [169.831388] i915 device info: dma_mask_size: 39 <7> [169.831390] i915 device info: is_mobile: no <7> [169.831392] i915 device info: is_lp: no <7> [169.831393] i915 device info: require_force_probe: no <7> [169.831395] i915 device info: is_dgfx: no <7> [169.831396] i915 device info: has_64bit_reloc: yes <7> [169.831398] i915 device info: has_64k_pages: no <7> [169.831400] i915 device info: gpu_reset_clobbers_display: no <7> [169.831401] i915 device info: has_reset_engine: yes <7> [169.831403] i915 device info: has_3d_pipeline: yes <7> [169.831405] i915 device info: has_flat_ccs: no <7> [169.831406] i915 device info: has_global_mocs: no <7> [169.831408] i915 device info: has_gmd_id: no <7> [169.831409] i915 device info: has_gt_uc: yes <7> [169.831411] i915 device info: has_heci_pxp: no <7> [169.831413] i915 device info: has_heci_gscfi: no <7> [169.831415] i915 device info: has_guc_deprivilege: no <7> [169.831416] i915 device info: has_guc_tlb_invalidation: no <7> [169.831418] i915 device info: has_l3_ccs_read: no <7> [169.831420] i915 device info: has_l3_dpf: no <7> [169.831421] i915 device info: has_llc: yes <7> [169.831423] i915 device info: has_logical_ring_contexts: yes <7> [169.831424] i915 device info: has_logical_ring_elsq: no <7> [169.831426] i915 device info: has_media_ratio_mode: no <7> [169.831428] i915 device info: has_mslice_steering: no <7> [169.831429] i915 device info: has_oa_bpc_reporting: no <7> [169.831431] i915 device info: has_oa_slice_contrib_limits: no <7> [169.831432] i915 device info: has_oam: no <7> [169.831434] i915 device info: has_one_eu_per_fuse_bit: no <7> [169.831436] i915 device info: has_pxp: no <7> [169.831438] i915 device info: has_rc6: yes <7> [169.831439] i915 device info: has_rc6p: no <7> [169.831441] i915 device info: has_rps: yes <7> [169.831442] i915 device info: has_runtime_pm: yes <7> [169.831444] i915 device info: has_snoop: no <7> [169.831446] i915 device info: has_coherent_ggtt: yes <7> [169.831447] i915 device info: tuning_thread_rr_after_dep: no <7> [169.831449] i915 device info: unfenced_needs_alignment: no <7> [169.831451] i915 device info: hws_needs_physical: no <7> [169.831452] i915 device info: has_pooled_eu: no <7> [169.831454] i915 device info: rawclk rate: 24000 kHz <7> [169.831456] i915 device info: iommu: enabled <7> [169.831458] i915 device info: available engines: 40403 <7> [169.831460] i915 device info: slice total: 1, mask=0001 <7> [169.831462] i915 device info: subslice total: 3 <7> [169.831463] i915 device info: slice0: 3 subslices, mask=00000007 <7> [169.831465] i915 device info: slice1: 0 subslices, mask=00000000 <7> [169.831467] i915 device info: slice2: 0 subslices, mask=00000000 <7> [169.831469] i915 device info: EU total: 24 <7> [169.831471] i915 device info: EU per subslice: 8 <7> [169.831472] i915 device info: has slice power gating: no <7> [169.831474] i915 device info: has subslice power gating: no <7> [169.831475] i915 device info: has EU power gating: yes <6> [169.831477] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [169.831479] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [169.831481] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [169.832316] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [169.833105] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [169.833762] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] status updated from unknown to disconnected <7> [169.833795] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [169.833804] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [169.833811] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [169.834898] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [169.835177] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [169.835660] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [169.835971] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [169.835992] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [169.836193] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [169.841044] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [169.841050] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [169.841273] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected <7> [169.841291] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [169.841297] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [169.841302] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [169.841307] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [169.841311] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [169.841345] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [169.841356] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [169.841376] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [169.841386] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [169.843601] [drm:drm_client_modeset_probe] <7> [169.843630] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [169.843636] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [169.843988] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [169.843995] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [169.843999] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [169.845346] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [169.846357] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [169.848034] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [169.848853] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [169.848861] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [169.848866] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [169.849547] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [169.849674] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [169.850084] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [169.850232] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [169.850237] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [169.850351] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [169.854617] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [169.854624] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [169.854772] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [169.854807] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [169.854812] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [169.854817] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [169.854822] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [169.854857] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [169.854867] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [169.854882] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [169.854882] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <6> [169.854890] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [169.854939] [drm:drm_client_modeset_probe] <7> [169.854897] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [169.855239] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [169.855247] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [169.855252] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [169.855420] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [169.855425] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [169.855429] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [169.856748] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [169.857839] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [169.858684] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [169.858693] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [169.858700] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [169.859292] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [169.859420] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [169.859844] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [169.859995] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [169.860000] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [169.860114] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [169.864679] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [169.864684] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [169.864860] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [169.864880] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [169.864884] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [169.864886] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [169.864889] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [169.864924] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [169.864931] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [169.865151] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [169.865158] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [169.865293] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [169.865300] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [169.867248] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [169.868386] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [169.869213] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [169.869265] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [169.869270] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [169.869929] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [169.870068] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [169.870474] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [169.870640] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [169.870644] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [169.870756] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [169.875249] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [169.875253] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [169.875376] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [169.877900] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [169.877906] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [169.878069] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [169.878468] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [169.878472] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [169.879651] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [169.880798] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [169.881504] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [169.881954] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [169.881959] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [169.882389] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [169.882525] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [169.882924] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [169.883114] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [169.883118] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [169.883230] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [169.887294] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [169.887299] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [169.887423] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [169.887727] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [169.887731] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [169.887908] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [169.887924] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [169.887928] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [169.889088] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [169.890160] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [169.890976] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [169.890993] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [169.890997] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [169.891423] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [169.891538] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [169.891964] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [169.892118] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [169.892122] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [169.892234] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [169.896322] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [169.896327] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [169.896451] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [170.084989] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [170.086185] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [170.086701] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [170.087181] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [170.088188] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [180.492949] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [180.501728] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [180.953702] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [180.963918] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [180.965484] [drm:drm_mode_setcrtc] [CRTC:51:pipe A] <7> [180.965761] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [180.966936] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [180.967639] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [180.968724] [drm:drm_mode_setcrtc] [CRTC:72:pipe B] <7> [180.968753] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [180.969243] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [180.969590] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [180.971842] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [180.973026] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [180.974093] [drm:drm_mode_setcrtc] [CRTC:93:pipe C] <7> [180.974103] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [180.974758] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [180.974942] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [180.975384] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [180.975550] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [180.975554] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [180.975677] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [180.979824] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [180.979828] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [181.092912] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [181.093103] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [181.093248] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [181.093387] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [181.094012] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.094616] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [181.097789] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [181.279208] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [181.287462] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [181.287860] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.288225] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [181.288996] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [181.289713] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [181.290385] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [181.290771] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [181.291176] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [181.291559] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [181.291979] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [181.292452] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [181.294381] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [181.295250] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [181.295912] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [181.296468] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.296676] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [181.297164] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.297413] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.297422] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [181.297626] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [181.302026] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.302034] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [181.321047] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [181.370254] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <6> [181.587548] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS <6> [181.587591] [IGT] i915_pm_rpm: exiting, ret=0

<6> [143.452808] [IGT] i915_pm_rpm: executing

<7> [143.457469] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [143.458190] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [143.458197] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [143.458493] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [143.458556] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [143.458560] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [143.458740] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [143.460161] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [143.461025] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [143.461833] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [143.461882] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [143.461887] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [143.462519] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [143.462642] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [143.463034] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [143.463192] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [143.463196] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [143.463312] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [143.467564] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [143.467569] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [143.467696] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [143.471246] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [143.471252] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [143.471422] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [143.471870] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [143.471875] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [143.473166] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [143.474302] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [143.474969] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [143.475408] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [143.475413] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [143.475861] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [143.475987] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [143.476369] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [143.476522] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [143.476526] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [143.476638] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [143.480706] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [143.480710] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [143.480853] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [143.481172] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [143.481177] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [143.481336] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [143.481351] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [143.481355] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [143.482571] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [143.483281] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [143.483949] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [143.483967] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [143.483971] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [143.484395] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [143.484512] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [143.484892] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [143.485087] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [143.485091] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [143.485203] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [143.489215] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [143.489220] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [143.489344] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [143.604981] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [143.605579] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [143.606150] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [143.606607] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [143.607551] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [154.538590] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [154.547656] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [154.572928] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [154.580005] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [154.580666] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]

<7> [154.580885] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [154.581260] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [154.582138] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [154.584001] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [154.584742] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]

<7> [154.584703] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [154.585353] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [154.588033] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [154.589166] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [154.590026] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [154.590659] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [154.590808] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [154.591235] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [154.591390] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [154.591395] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [154.591508] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [154.595964] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [154.595969] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [154.596204] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]

<7> [154.708931] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [154.709251] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [154.709515] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [154.709771] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [154.710514] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [154.711541] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [154.715868] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [154.797460] [IGT] i915_pm_rpm: starting subtest module-reload

<7> [154.919850] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [154.925294] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [154.925570] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [154.925957] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [154.926555] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [154.927168] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [154.927597] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [154.927865] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [154.928119] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [154.928370] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [154.928642] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [154.928958] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [154.930675] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [154.931834] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [154.932683] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [154.933307] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [154.933435] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [154.933874] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [154.934029] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [154.934035] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [154.934148] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [154.938600] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [154.938605] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [154.961042] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [155.009221] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<6> [155.236606] [IGT] Reloading i915 w/o display

<7> [155.394679] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [155.394962] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [155.395120] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH

<7> [155.395258] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [155.395442] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [155.395575] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz

<7> [155.396248] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [155.396368] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [155.396480] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M

<6> [155.396591] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [155.396595] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [155.396861] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [155.396885] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047

<7> [155.397036] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K

<7> [155.397336] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018

<7> [155.397506] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [155.397652] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [155.397856] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [155.398044] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [155.402211] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [155.402360] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [155.402499] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [155.402638] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [155.402805] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [155.402985] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [155.403087] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [155.403187] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [155.403286] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [155.403385] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [155.403483] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [155.403581] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [155.403678] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [155.403783] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [155.404501] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [155.404669] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196

<7> [155.404890] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [155.405047] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [155.405203] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [155.405359] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [155.405515] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812)

<7> [155.405669] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34)

<7> [155.405833] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [155.406031] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [155.406187] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [155.406345] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [155.406496] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [155.406647] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [155.406805] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6

<7> [155.407032] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [155.407186] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [155.407341] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [155.407492] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [155.407645] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [155.407828] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [155.407996] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3

<7> [155.408149] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [155.408300] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3

<7> [155.408451] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [155.408616] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [155.408809] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [155.409015] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [155.409171] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [155.409676] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [155.409840] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [155.410089] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [155.410282] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [155.410434] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [155.410585] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [155.410746] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [155.410958] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [155.411127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [155.411280] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [155.411432] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [155.411617] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<7> [155.412057] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [155.412495] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [155.412645] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [155.413244] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [155.413403] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [155.413554] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [155.413704] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [155.413970] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [155.414177] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<6> [155.414296] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [155.414355] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [155.414498] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [155.414639] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [155.414815] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [155.415020] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [155.415161] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [155.416330] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [155.417281] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [155.417579] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] Using AUX CH A (VBT)

<7> [155.417757] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A]

<7> [155.420657] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [155.420903] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [155.421089] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [155.421247] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static

<7> [155.421404] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [155.421557] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [155.421706] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [155.421908] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [155.422073] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [155.422224] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0

<7> [155.422374] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1

<7> [155.422568] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0

<7> [155.422760] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [155.422948] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [155.423136] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [155.423272] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [155.423407] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [155.423613] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [155.424040] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on

<7> [155.424266] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [155.424554] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [155.424815] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [155.425056] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [155.425254] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [155.639788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [155.650788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [155.661789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [155.672789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [155.683787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [155.694788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [155.705788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [155.716789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [155.727787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [155.738788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [155.749788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [155.760790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [155.771787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [155.782787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [155.793788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [155.804790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [155.815787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [155.826788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [155.837790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [155.848789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [155.859787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [155.870788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [155.881787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [155.892790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [155.903788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [155.914787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [155.925788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [155.936789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [155.947788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [155.958788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [155.969787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [155.980790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [155.981003] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110

<6> [155.981016] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP

<7> [155.981077] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off

<7> [155.981283] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [155.981516] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] Using AUX CH B (VBT)

<7> [155.981676] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B]

<7> [155.992801] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.003787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.014788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.025788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.036790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.047787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.058787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.069789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.080787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.091787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.102788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.113787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.124788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.135786] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.146787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.157788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.168786] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.179787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.190788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.201787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.212788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.223789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.234788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.245788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.256789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.267787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.278787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.289788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.300786] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.311787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.322786] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.333787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.333998] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX B/DDI B/PHY B: Too many retries, giving up. First error: -110

<7> [156.334011] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel

<7> [156.344788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.355787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.366788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.377790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.388787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.399788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.410789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.421789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.432788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.443788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.454788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.465789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.476787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.487788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.498789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.509789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.520788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.531788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.542789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.553790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.564787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.575788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.586789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.597790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.608788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.619787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.630789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.641790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.652787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.663788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.674789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.685790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [156.685998] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX B/DDI B/PHY B: Too many retries, giving up. First error: -110

<7> [156.686011] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [156.686173] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DDI C/PHY C] Using AUX CH C (VBT)

<7> [156.686333] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C]

<7> [156.687347] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel

<7> [156.688355] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [156.688511] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C]

<7> [156.688653] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:106:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [156.689030] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [156.689246] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [156.689457] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [156.689619] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [156.689792] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [156.689953] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [156.690128] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [156.690290] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [156.690451] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [156.690665] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [156.690943] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [156.691137] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [156.691301] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [156.691448] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A

<7> [156.691593] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B

<7> [156.691739] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C

<7> [156.691912] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [156.692059] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A

<7> [156.692204] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B

<7> [156.692349] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C

<7> [156.692510] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [156.692678] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [156.692851] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [156.693015] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [156.693221] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled

<7> [156.693397] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled

<7> [156.693571] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled

<7> [156.693718] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [156.693870] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [156.694062] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [156.694208] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [156.694362] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [156.694509] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [156.694753] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [156.694984] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [156.695181] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [156.695332] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [156.695478] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [156.695622] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [156.695836] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [156.695990] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [156.696142] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [156.696294] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [156.696446] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [156.696594] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [156.696737] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [156.696917] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [156.697034] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [156.697159] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [156.697301] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 6 GT workarounds on global

<7> [156.699338] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [156.699486] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [156.699625] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 14 context workarounds on rcs'0

<7> [156.711596] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [156.711735] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [156.712067] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [156.712184] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [156.712460] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [156.713139] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [156.713321] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [156.713461] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [156.713599] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [156.713752] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [156.717986] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [156.718635] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event

<7> [156.719013] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [156.719561] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event

<7> [156.719902] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event

<6> [156.719945] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0

<7> [156.721323] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected

<6> [156.733938] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [156.736029] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7

<7> [156.736604] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [156.737623] i915 display info: display version: 9

<7> [156.737626] i915 display info: cursor_needs_physical: no

<7> [156.737627] i915 display info: has_cdclk_crawl: no

<7> [156.737629] i915 display info: has_cdclk_squash: no

<7> [156.737630] i915 display info: has_ddi: yes

<7> [156.737632] i915 display info: has_dp_mst: yes

<7> [156.737633] i915 display info: has_dsb: no

<7> [156.737631] [drm:drm_client_modeset_probe]

<7> [156.737635] i915 display info: has_fpga_dbg: yes

<7> [156.737636] i915 display info: has_gmch: no

<7> [156.737638] i915 display info: has_hotplug: yes

<7> [156.737639] i915 display info: has_hti: no

<7> [156.737641] i915 display info: has_ipc: yes

<7> [156.737642] i915 display info: has_overlay: no

<7> [156.737643] i915 display info: has_psr: yes

<7> [156.737645] i915 display info: has_psr_hw_tracking: yes

<7> [156.737646] i915 display info: overlay_needs_physical: no

<7> [156.737648] i915 display info: supports_tv: no

<7> [156.737649] i915 display info: has_hdcp: yes

<7> [156.737650] i915 display info: has_dmc: yes

<7> [156.737652] i915 display info: has_dsc: no

<7> [156.737676] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [156.737655] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [156.737687] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [156.737926] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] status updated from unknown to disconnected

<7> [156.737942] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [156.737950] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [156.737859] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [156.737957] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [156.738101] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [156.738227] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] status updated from unknown to disconnected

<7> [156.738240] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [156.738246] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [156.738252] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [156.738343] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [156.738463] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected

<7> [156.738475] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [156.738480] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [156.738485] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [156.738489] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [156.738493] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [156.738510] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [156.738522] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [156.738542] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [156.738551] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [156.739071] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [156.739252] [drm:drm_client_modeset_probe]

<7> [156.739289] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [156.739299] i915 device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9

<7> [156.739304] i915 device info: graphics version: 9

<7> [156.739306] i915 device info: media version: 9

<7> [156.739309] i915 device info: graphics stepping: F0

<7> [156.739312] i915 device info: media stepping: F0

<7> [156.739314] i915 device info: display stepping: C0

<7> [156.739317] i915 device info: base die stepping: **

<7> [156.739319] i915 device info: gt: 2

<7> [156.739322] i915 device info: memory-regions: 0x21

<7> [156.739325] i915 device info: page-sizes: 0x11000

<7> [156.739327] i915 device info: platform: KABYLAKE

<7> [156.739330] i915 device info: ppgtt-size: 48

<7> [156.739332] i915 device info: ppgtt-type: 2

<7> [156.739335] i915 device info: dma_mask_size: 39

<7> [156.739338] i915 device info: is_mobile: no

<7> [156.739340] i915 device info: is_lp: no

<7> [156.739343] i915 device info: require_force_probe: no

<7> [156.739345] i915 device info: is_dgfx: no

<7> [156.739348] i915 device info: has_64bit_reloc: yes

<7> [156.739351] i915 device info: has_64k_pages: no

<7> [156.739353] i915 device info: gpu_reset_clobbers_display: no

<7> [156.739356] i915 device info: has_reset_engine: yes

<7> [156.739358] i915 device info: has_3d_pipeline: yes

<7> [156.739361] i915 device info: has_flat_ccs: no

<7> [156.739364] i915 device info: has_global_mocs: no

<7> [156.739366] i915 device info: has_gmd_id: no

<7> [156.739369] i915 device info: has_gt_uc: yes

<7> [156.739371] i915 device info: has_heci_pxp: no

<7> [156.739374] i915 device info: has_heci_gscfi: no

<7> [156.739376] i915 device info: has_guc_deprivilege: no

<7> [156.739379] i915 device info: has_guc_tlb_invalidation: no

<7> [156.739381] i915 device info: has_l3_ccs_read: no

<7> [156.739384] i915 device info: has_l3_dpf: no

<7> [156.739386] i915 device info: has_llc: yes

<7> [156.739389] i915 device info: has_logical_ring_contexts: yes

<7> [156.739392] i915 device info: has_logical_ring_elsq: no

<7> [156.739394] i915 device info: has_media_ratio_mode: no

<7> [156.739397] i915 device info: has_mslice_steering: no

<7> [156.739399] i915 device info: has_oa_bpc_reporting: no

<7> [156.739402] i915 device info: has_oa_slice_contrib_limits: no

<7> [156.739298] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [156.739404] i915 device info: has_oam: no

<7> [156.739407] i915 device info: has_one_eu_per_fuse_bit: no

<7> [156.739409] i915 device info: has_pxp: no

<7> [156.739411] i915 device info: has_rc6: yes

<7> [156.739413] i915 device info: has_rc6p: no

<7> [156.739415] i915 device info: has_rps: yes

<7> [156.739417] i915 device info: has_runtime_pm: yes

<7> [156.739420] i915 device info: has_snoop: no

<7> [156.739422] i915 device info: has_coherent_ggtt: yes

<7> [156.739424] i915 device info: tuning_thread_rr_after_dep: no

<7> [156.739426] i915 device info: unfenced_needs_alignment: no

<7> [156.739428] i915 device info: hws_needs_physical: no

<7> [156.739430] i915 device info: has_pooled_eu: no

<7> [156.739432] i915 device info: rawclk rate: 24000 kHz

<7> [156.739435] i915 device info: iommu: enabled

<7> [156.739437] i915 device info: available engines: 40403

<7> [156.739440] i915 device info: slice total: 1, mask=0001

<7> [156.739442] i915 device info: subslice total: 3

<7> [156.739444] i915 device info: slice0: 3 subslices, mask=00000007

<7> [156.739447] i915 device info: slice1: 0 subslices, mask=00000000

<7> [156.739450] i915 device info: slice2: 0 subslices, mask=00000000

<7> [156.739452] i915 device info: EU total: 24

<7> [156.739454] i915 device info: EU per subslice: 8

<7> [156.739456] i915 device info: has slice power gating: no

<7> [156.739458] i915 device info: has subslice power gating: no

<7> [156.739461] i915 device info: has EU power gating: yes

<6> [156.739463] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [156.739466] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [156.739468] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [156.739527] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [156.739535] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [156.739541] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [156.739752] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [156.739759] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [156.739765] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [156.739992] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [156.739999] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [156.740004] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [156.740008] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [156.740013] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [156.740044] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [156.740055] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [156.740074] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [156.740083] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [156.744881] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [156.893511] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [156.894588] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [156.895133] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [156.895626] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [156.896608] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [167.794594] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [167.804737] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [167.830105] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [167.840001] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [167.841355] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [167.842312] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [167.842930] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [167.843480] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [167.844062] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [167.845215] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [167.850092] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [168.047149] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [168.055960] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [168.056884] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [168.057476] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [168.057583] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [168.058029] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [168.058455] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [168.058542] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [168.059191] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [168.059813] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [168.060199] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [168.060582] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [168.060989] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [168.084151] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [168.124681] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<6> [168.336652] [IGT] Reloading i915 as normal

<7> [168.475757] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [168.476025] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [168.476195] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH

<7> [168.476345] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [168.476542] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [168.476687] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz

<7> [168.477561] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [168.477755] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [168.477987] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M

<6> [168.478174] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [168.478180] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [168.478500] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [168.478523] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047

<7> [168.478720] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K

<7> [168.479290] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018

<7> [168.479525] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [168.479728] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [168.479995] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [168.480201] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [168.484248] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [168.484407] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [168.484557] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [168.484704] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [168.484921] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [168.485126] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [168.485289] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [168.485456] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [168.485616] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [168.485776] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [168.485977] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [168.486153] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [168.486309] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [168.486464] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [168.487175] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [168.487398] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196

<7> [168.487624] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [168.487922] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [168.488181] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [168.488405] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [168.488662] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812)

<7> [168.488908] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34)

<7> [168.489143] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [168.489363] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [168.489583] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [168.489829] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [168.490063] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [168.490277] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [168.490560] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6

<7> [168.490808] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [168.491047] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [168.491266] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [168.491479] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [168.491693] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [168.491937] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [168.492190] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3

<7> [168.492440] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [168.492658] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3

<7> [168.492919] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [168.493165] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [168.493421] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [168.493662] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [168.493944] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [168.494618] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [168.494900] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [168.495151] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [168.495425] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [168.495644] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [168.495907] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [168.496232] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [168.496487] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [168.496705] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [168.496981] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [168.497217] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [168.497508] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<7> [168.498079] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [168.498332] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [168.498511] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [168.498559] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [168.498661] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [168.498846] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [168.498813] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [168.499065] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [168.499101] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [168.499211] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [168.499353] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [168.499537] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<6> [168.499744] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [168.499730] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [168.499935] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [168.500105] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [168.501284] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [168.502719] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [168.503038] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] Using AUX CH A (VBT)

<7> [168.503287] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A]

<7> [168.505812] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [168.506010] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [168.506169] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [168.506373] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static

<7> [168.506557] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [168.506711] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [168.506936] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [168.507140] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [168.507291] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [168.507442] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0

<7> [168.507592] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1

<7> [168.507813] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0

<7> [168.508070] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [168.508208] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [168.508343] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [168.508478] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [168.508615] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [168.508856] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [168.509217] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on

<7> [168.509386] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [168.509594] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [168.509797] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [168.510109] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [168.510267] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [168.727789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [168.738789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [168.749792] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [168.760789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [168.771789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [168.782789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [168.793792] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [168.804789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [168.815789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [168.826790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [168.837790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [168.848789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [168.859788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [168.870788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [168.881790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [168.892788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [168.903788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [168.914788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [168.925790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [168.936788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [168.947788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [168.958789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [168.969789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [168.980788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [168.991788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [169.002788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [169.013791] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [169.024787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [169.035788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [169.046788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [169.057791] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [169.068788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [169.069003] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110

<6> [169.069016] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP

<7> [169.069078] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off

<7> [169.069284] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [169.069523] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] Using AUX CH B (VBT)

<7> [169.069684] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B]

<7> [169.080788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.091789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.102790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.113789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.124788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.135790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.146788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.157788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.168788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.179791] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.190788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.201788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.212790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.223790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.234788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.245788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.256788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.267790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.278788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.289788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.300788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.311790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.322788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.333788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.344788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.355790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.366788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.377788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.388788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.399790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.410789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.421814] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.422022] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX B/DDI B/PHY B: Too many retries, giving up. First error: -110

<7> [169.422036] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel

<7> [169.432788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.443790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.454928] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.465790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.476788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.487788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.498788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.509790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.520788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.531788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.542788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.553791] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.564788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.575788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.586789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.597788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.608788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.619790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.630788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.641788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.652789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.663789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.674788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.685788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.696790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.707789] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.718788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.729788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.740790] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.751788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.762788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.773788] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [169.774013] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX B/DDI B/PHY B: Too many retries, giving up. First error: -110

<7> [169.774025] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [169.774183] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DDI C/PHY C] Using AUX CH C (VBT)

<7> [169.774337] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C]

<7> [169.775444] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel

<7> [169.776431] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [169.776589] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C]

<7> [169.776732] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:106:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [169.777105] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [169.777317] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [169.777528] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [169.777690] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [169.777858] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [169.778084] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [169.778245] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [169.778494] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [169.778685] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [169.778882] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [169.779085] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [169.779245] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [169.779407] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [169.779553] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A

<7> [169.779698] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B

<7> [169.779849] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C

<7> [169.780051] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [169.780196] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A

<7> [169.780341] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B

<7> [169.780485] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C

<7> [169.780646] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [169.780847] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [169.781028] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [169.781192] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [169.781403] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled

<7> [169.781587] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled

<7> [169.781761] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled

<7> [169.781975] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [169.782227] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [169.782374] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [169.782519] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [169.782673] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [169.782830] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [169.783018] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [169.783164] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [169.783317] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [169.783464] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [169.783609] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [169.783754] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [169.784008] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [169.784162] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [169.784313] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [169.784464] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [169.784615] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [169.784761] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [169.784931] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [169.785151] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [169.785271] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [169.785447] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [169.785667] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 6 GT workarounds on global

<7> [169.787582] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [169.787727] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [169.787908] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 14 context workarounds on rcs'0

<7> [169.799712] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [169.799859] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [169.799979] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [169.800097] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [169.800358] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [169.800573] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [169.800725] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [169.800912] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [169.801109] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [169.801320] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [169.805067] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [169.805727] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event

<7> [169.806069] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [169.806709] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event

<7> [169.807053] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event

<6> [169.807107] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0

<7> [169.808486] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected

<6> [169.825017] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [169.828210] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8

<7> [169.829345] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [169.830060] i915 display info: display version: 9

<7> [169.830063] i915 display info: cursor_needs_physical: no

<7> [169.830065] i915 display info: has_cdclk_crawl: no

<7> [169.830066] i915 display info: has_cdclk_squash: no

<7> [169.830068] i915 display info: has_ddi: yes

<7> [169.830069] i915 display info: has_dp_mst: yes

<7> [169.830068] [drm:drm_client_modeset_probe]

<7> [169.830070] i915 display info: has_dsb: no

<7> [169.830073] i915 display info: has_fpga_dbg: yes

<7> [169.830074] i915 display info: has_gmch: no

<7> [169.830076] i915 display info: has_hotplug: yes

<7> [169.830077] i915 display info: has_hti: no

<7> [169.830079] i915 display info: has_ipc: yes

<7> [169.830080] i915 display info: has_overlay: no

<7> [169.830081] i915 display info: has_psr: yes

<7> [169.830083] i915 display info: has_psr_hw_tracking: yes

<7> [169.830084] i915 display info: overlay_needs_physical: no

<7> [169.830086] i915 display info: supports_tv: no

<7> [169.830087] i915 display info: has_hdcp: yes

<7> [169.830088] i915 display info: has_dmc: yes

<7> [169.830090] i915 display info: has_dsc: no

<7> [169.830114] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [169.830093] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [169.830124] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [169.830273] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [169.830433] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [169.830591] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [169.830881] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] status updated from unknown to disconnected

<7> [169.830899] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [169.830906] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [169.830913] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [169.831192] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [169.831364] i915 device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9

<7> [169.831368] i915 device info: graphics version: 9

<7> [169.831369] i915 device info: media version: 9

<7> [169.831371] i915 device info: graphics stepping: F0

<7> [169.831373] i915 device info: media stepping: F0

<7> [169.831375] i915 device info: display stepping: C0

<7> [169.831376] i915 device info: base die stepping: **

<7> [169.831378] i915 device info: gt: 2

<7> [169.831379] i915 device info: memory-regions: 0x21

<7> [169.831381] i915 device info: page-sizes: 0x11000

<7> [169.831383] i915 device info: platform: KABYLAKE

<7> [169.831385] i915 device info: ppgtt-size: 48

<7> [169.831386] i915 device info: ppgtt-type: 2

<7> [169.831388] i915 device info: dma_mask_size: 39

<7> [169.831390] i915 device info: is_mobile: no

<7> [169.831392] i915 device info: is_lp: no

<7> [169.831393] i915 device info: require_force_probe: no

<7> [169.831395] i915 device info: is_dgfx: no

<7> [169.831396] i915 device info: has_64bit_reloc: yes

<7> [169.831398] i915 device info: has_64k_pages: no

<7> [169.831400] i915 device info: gpu_reset_clobbers_display: no

<7> [169.831401] i915 device info: has_reset_engine: yes

<7> [169.831403] i915 device info: has_3d_pipeline: yes

<7> [169.831405] i915 device info: has_flat_ccs: no

<7> [169.831406] i915 device info: has_global_mocs: no

<7> [169.831408] i915 device info: has_gmd_id: no

<7> [169.831409] i915 device info: has_gt_uc: yes

<7> [169.831411] i915 device info: has_heci_pxp: no

<7> [169.831413] i915 device info: has_heci_gscfi: no

<7> [169.831415] i915 device info: has_guc_deprivilege: no

<7> [169.831416] i915 device info: has_guc_tlb_invalidation: no

<7> [169.831418] i915 device info: has_l3_ccs_read: no

<7> [169.831420] i915 device info: has_l3_dpf: no

<7> [169.831421] i915 device info: has_llc: yes

<7> [169.831423] i915 device info: has_logical_ring_contexts: yes

<7> [169.831424] i915 device info: has_logical_ring_elsq: no

<7> [169.831426] i915 device info: has_media_ratio_mode: no

<7> [169.831428] i915 device info: has_mslice_steering: no

<7> [169.831429] i915 device info: has_oa_bpc_reporting: no

<7> [169.831431] i915 device info: has_oa_slice_contrib_limits: no

<7> [169.831432] i915 device info: has_oam: no

<7> [169.831434] i915 device info: has_one_eu_per_fuse_bit: no

<7> [169.831436] i915 device info: has_pxp: no

<7> [169.831438] i915 device info: has_rc6: yes

<7> [169.831439] i915 device info: has_rc6p: no

<7> [169.831441] i915 device info: has_rps: yes

<7> [169.831442] i915 device info: has_runtime_pm: yes

<7> [169.831444] i915 device info: has_snoop: no

<7> [169.831446] i915 device info: has_coherent_ggtt: yes

<7> [169.831447] i915 device info: tuning_thread_rr_after_dep: no

<7> [169.831449] i915 device info: unfenced_needs_alignment: no

<7> [169.831451] i915 device info: hws_needs_physical: no

<7> [169.831452] i915 device info: has_pooled_eu: no

<7> [169.831454] i915 device info: rawclk rate: 24000 kHz

<7> [169.831456] i915 device info: iommu: enabled

<7> [169.831458] i915 device info: available engines: 40403

<7> [169.831460] i915 device info: slice total: 1, mask=0001

<7> [169.831462] i915 device info: subslice total: 3

<7> [169.831463] i915 device info: slice0: 3 subslices, mask=00000007

<7> [169.831465] i915 device info: slice1: 0 subslices, mask=00000000

<7> [169.831467] i915 device info: slice2: 0 subslices, mask=00000000

<7> [169.831469] i915 device info: EU total: 24

<7> [169.831471] i915 device info: EU per subslice: 8

<7> [169.831472] i915 device info: has slice power gating: no

<7> [169.831474] i915 device info: has subslice power gating: no

<7> [169.831475] i915 device info: has EU power gating: yes

<6> [169.831477] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [169.831479] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [169.831481] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [169.832316] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [169.833105] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [169.833762] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] status updated from unknown to disconnected

<7> [169.833795] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [169.833804] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [169.833811] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [169.834898] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [169.835177] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [169.835660] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [169.835971] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [169.835992] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [169.836193] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [169.841044] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [169.841050] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [169.841273] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected

<7> [169.841291] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [169.841297] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [169.841302] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [169.841307] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [169.841311] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [169.841345] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [169.841356] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [169.841376] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [169.841386] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [169.843601] [drm:drm_client_modeset_probe]

<7> [169.843630] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [169.843636] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [169.843988] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [169.843995] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [169.843999] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [169.845346] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [169.846357] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [169.848034] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [169.848853] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [169.848861] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [169.848866] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [169.849547] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [169.849674] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [169.850084] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [169.850232] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [169.850237] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [169.850351] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [169.854617] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [169.854624] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [169.854772] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [169.854807] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [169.854812] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [169.854817] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [169.854822] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [169.854857] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [169.854867] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [169.854882] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [169.854882] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<6> [169.854890] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [169.854939] [drm:drm_client_modeset_probe]

<7> [169.854897] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [169.855239] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [169.855247] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [169.855252] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [169.855420] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [169.855425] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [169.855429] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [169.856748] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [169.857839] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [169.858684] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [169.858693] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [169.858700] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [169.859292] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [169.859420] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [169.859844] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [169.859995] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [169.860000] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [169.860114] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [169.864679] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [169.864684] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [169.864860] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [169.864880] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [169.864884] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [169.864886] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [169.864889] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [169.864924] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [169.864931] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [169.865151] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [169.865158] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [169.865293] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [169.865300] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [169.867248] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [169.868386] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [169.869213] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [169.869265] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [169.869270] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [169.869929] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [169.870068] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [169.870474] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [169.870640] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [169.870644] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [169.870756] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [169.875249] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [169.875253] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [169.875376] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [169.877900] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [169.877906] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [169.878069] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [169.878468] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [169.878472] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [169.879651] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [169.880798] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [169.881504] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [169.881954] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [169.881959] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [169.882389] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [169.882525] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [169.882924] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [169.883114] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [169.883118] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [169.883230] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [169.887294] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [169.887299] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [169.887423] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [169.887727] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [169.887731] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [169.887908] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [169.887924] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [169.887928] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [169.889088] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [169.890160] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [169.890976] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [169.890993] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [169.890997] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [169.891423] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [169.891538] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [169.891964] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [169.892118] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [169.892122] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [169.892234] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [169.896322] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [169.896327] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [169.896451] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [170.084989] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [170.086185] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [170.086701] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [170.087181] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [170.088188] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [180.492949] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [180.501728] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [180.953702] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [180.963918] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [180.965484] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]

<7> [180.965761] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [180.966936] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [180.967639] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [180.968724] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]

<7> [180.968753] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [180.969243] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [180.969590] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [180.971842] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [180.973026] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [180.974093] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]

<7> [180.974103] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [180.974758] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [180.974942] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [180.975384] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [180.975550] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [180.975554] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [180.975677] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [180.979824] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [180.979828] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [181.092912] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [181.093103] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [181.093248] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [181.093387] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [181.094012] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [181.094616] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [181.097789] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [181.279208] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [181.287462] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [181.287860] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [181.288225] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [181.288996] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [181.289713] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [181.290385] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [181.290771] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [181.291176] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [181.291559] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [181.291979] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [181.292452] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [181.294381] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [181.295250] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [181.295912] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [181.296468] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [181.296676] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [181.297164] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [181.297413] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [181.297422] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [181.297626] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [181.302026] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [181.302034] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [181.321047] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [181.370254] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<6> [181.587548] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS

<6> [181.587591] [IGT] i915_pm_rpm: exiting, ret=0

Results for igt@i915_pm_rpm@module-reload