Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Duration 0.04 seconds
Igt-Version 
IGT-Version: 1.28-g40ed74461 (x86_64) (Linux: 6.8.0-rc7-linus-v6.8-rc7-g90d35da658da+ x86_64)
Out 
Using IGT_SRANDOM=1709500563 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.045s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.045s)
Dmesg
<6> [168.816917] Console: switching to colour dummy device 80x25
<6> [168.817474] [IGT] kms_force_connector_basic: executing
<7> [168.833269] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [168.834861] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [168.840288] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [168.841969] [drm:status_store] [CONNECTOR:267:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [168.841982] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1]
<7> [168.841993] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:267:HDMI-A-1]
<7> [168.842660] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [168.842895] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [168.843369] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [168.843601] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [168.843610] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [168.843825] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc3. force bit now 1
<7> [168.850168] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [168.850175] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc3. force bit now 0
<7> [168.850399] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1] disconnected
<7> [168.850437] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1]
<7> [168.850444] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:267:HDMI-A-1]
<7> [168.851005] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [168.851219] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [168.851631] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [168.851835] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [168.851840] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [168.852043] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc3. force bit now 1
<7> [168.858358] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [168.858364] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc3. force bit now 0
<7> [168.858571] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1] disconnected
<7> [168.858769] [drm:status_store] [CONNECTOR:273:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [168.858775] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:HDMI-A-2]
<7> [168.858782] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:273:HDMI-A-2]
<7> [168.859119] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:HDMI-A-2] disconnected
<7> [168.859153] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:HDMI-A-2]
<7> [168.859160] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:273:HDMI-A-2]
<7> [168.859467] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:HDMI-A-2] disconnected
<7> [168.859496] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1]
<7> [168.859501] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:267:HDMI-A-1]
<7> [168.860039] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [168.860233] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [168.860645] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [168.860842] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [168.860848] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [168.861047] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc3. force bit now 1
<7> [168.867303] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [168.867309] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc3. force bit now 0
<7> [168.867512] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1] disconnected
<6> [168.868038] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [168.868224] [drm:status_store] [CONNECTOR:267:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [168.868232] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1]
<7> [168.868239] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:267:HDMI-A-1]
<7> [168.868690] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [168.868882] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [168.869326] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [168.869522] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [168.869539] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [168.869726] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc3. force bit now 1
<7> [168.876039] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [168.876050] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc3. force bit now 0
<7> [168.876244] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1] status updated from disconnected to connected
<7> [168.876421] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1] probed modes :
<7> [168.876426] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [168.876436] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [168.876443] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [168.876450] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [168.876456] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [168.876510] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1]
<7> [168.876516] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:267:HDMI-A-1]
<7> [168.876979] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [168.877188] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [168.877604] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [168.877803] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [168.877813] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [168.878000] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc3. force bit now 1
<7> [168.884289] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [168.884299] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc3. force bit now 0
<7> [168.884551] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1] probed modes :
<7> [168.884556] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [168.884563] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [168.884569] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [168.884575] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [168.884581] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [168.884805] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:267:HDMI-A-1] EDID override set
<7> [168.884830] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1]
<7> [168.884836] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:267:HDMI-A-1]
<7> [168.885075] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:267:HDMI-A-1] ELD monitor IGT
<7> [168.885083] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:267:HDMI-A-1] ELD size 24, SAD count 0
<7> [168.885343] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [168.885529] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [168.885925] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [168.886179] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [168.886309] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [168.886317] [drm:drm_mode_prune_invalid] Not using 800x600 mode: STALE
<7> [168.886326] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [168.886333] [drm:drm_mode_prune_invalid] Not using 848x480 mode: STALE
<7> [168.886342] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1] probed modes :
<7> [168.886347] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [168.886353] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [168.886359] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [168.886364] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [168.886370] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [168.886376] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [168.886546] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:267:HDMI-A-1] EDID override set
<7> [168.886577] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1]
<7> [168.886583] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:267:HDMI-A-1]
<7> [168.886809] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:267:HDMI-A-1] ELD monitor IGT
<7> [168.886816] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:267:HDMI-A-1] ELD size 24, SAD count 0
<7> [168.886822] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:267:HDMI-A-1] EDID changed, epoch counter 4
<7> [168.887084] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [168.887267] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [168.887659] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [168.887849] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [168.887965] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [168.887972] [drm:drm_mode_prune_invalid] Not using 1400x1050 mode: STALE
<7> [168.887981] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1] probed modes :
<7> [168.887985] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [168.887991] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [168.887997] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [168.888002] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [168.888008] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [168.888163] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:267:HDMI-A-1] EDID override reset
<7> [168.888192] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1]
<7> [168.888198] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:267:HDMI-A-1]
<7> [168.888621] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [168.888807] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [168.889223] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [168.889415] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [168.889424] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [168.889605] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc3. force bit now 1
<7> [168.895886] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [168.895896] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc3. force bit now 0
<7> [168.896090] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:267:HDMI-A-1] EDID changed, epoch counter 5
<7> [168.896158] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [168.896166] [drm:drm_mode_prune_invalid] Not using 1920x1080 mode: STALE
<7> [168.896175] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [168.896181] [drm:drm_mode_prune_invalid] Not using 1280x720 mode: STALE
<7> [168.896190] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1] probed modes :
<7> [168.896195] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [168.896201] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [168.896207] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [168.896213] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [168.896219] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [168.896393] [drm:status_store] [CONNECTOR:267:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [168.896399] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1]
<7> [168.896407] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:267:HDMI-A-1]
<7> [168.896953] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [168.897158] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [168.897573] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [168.897768] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [168.897774] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [168.897960] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc3. force bit now 1
<7> [168.904287] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [168.904294] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc3. force bit now 0
<7> [168.904492] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1] status updated from connected to disconnected
<7> [168.904508] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1] disconnected
<7> [168.904565] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1]
<7> [168.904571] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:267:HDMI-A-1]
<7> [168.905106] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [168.905303] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [168.905712] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [168.905908] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [168.905914] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [168.906115] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc3. force bit now 1
<7> [168.912375] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [168.912381] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc3. force bit now 0
<7> [168.912579] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1] disconnected
<6> [168.913136] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [168.913296] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [168.914548] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:236:DP-1] EDID override reset
<7> [168.914573] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1]
<7> [168.914581] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]
<7> [168.914907] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1] disconnected
<7> [168.915057] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:250:DP-2] EDID override reset
<7> [168.915078] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:250:DP-2]
<7> [168.915084] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:250:DP-2]
<7> [168.915394] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:250:DP-2] disconnected
<7> [168.915546] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:259:DP-3] EDID override reset
<7> [168.915567] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:259:DP-3]
<7> [168.915573] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:259:DP-3]
<7> [168.915990] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_TC3
<7> [168.923146] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC3/DDI TC3/PHY TC3: Base DPCD: 12 14 c4 01 01 00 01 80 02 00 06 00 00 00 80
<7> [168.923178] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC3/DDI TC3/PHY TC3: DPCD: 14 14 c4 01 01 00 01 80 02 00 06 00 00 00 80
<7> [168.924933] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:259:DP-3][ENCODER:258:DDI TC3/PHY TC3][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [168.930064] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC3/DDI TC3/PHY TC3: Base DPCD: 12 14 c4 01 01 00 01 80 02 00 06 00 00 00 80
<7> [168.930090] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC3/DDI TC3/PHY TC3: DPCD: 14 14 c4 01 01 00 01 80 02 00 06 00 00 00 80
<7> [168.932193] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX USBC3/DDI TC3/PHY TC3: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000
<7> [168.933973] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [168.935797] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0
<7> [168.937423] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:258:DDI TC3/PHY TC3] MST support: port: yes, sink: no, modparam: yes
<7> [168.937685] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [168.937947] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
<7> [168.938224] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
<7> [168.964582] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:259:DP-3] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [168.964592] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:259:DP-3] ELD monitor LG HDR 4K
<7> [168.964600] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:259:DP-3] ELD size 32, SAD count 1
<7> [168.964627] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:259:DP-3] VRR capable: no
<7> [168.964934] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:259:DP-3] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [168.966961] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [168.967224] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:259:DP-3] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [168.969836] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:259:DP-3] probed modes :
<7> [168.969843] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 533250 3840 3888 3920 4000 2160 2214 2219 2222 0x48 0x9
<7> [168.969852] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 266640 3840 3848 3992 4000 2160 2214 2219 2222 0x40 0x9
<7> [168.969859] [drm:drm_mode_debug_printmodeline] Modeline "2560x1440": 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x40 0x9
<7> [168.969866] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [168.969873] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [168.969880] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [168.969886] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
<7> [168.969894] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [168.969900] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6
<7> [168.969907] [drm:drm_mode_debug_printmodeline] Modeline "1152x864": 60 81579 1152 1216 1336 1520 864 865 868 895 0x0 0x6
<7> [168.969914] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [168.969921] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [168.969927] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [168.969934] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [168.969941] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [168.969948] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
<7> [168.969954] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
<7> [168.969961] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
<7> [168.969968] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [168.969974] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [168.970257] [drm:status_store] [CONNECTOR:267:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [168.970266] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1]
<7> [168.970275] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:267:HDMI-A-1]
<7> [168.970941] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [168.971211] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [168.971652] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [168.971879] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [168.971886] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [168.972112] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc3. force bit now 1
<7> [168.978415] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [168.978422] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc3. force bit now 0
<7> [168.978636] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1] disconnected
<7> [168.978687] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1]
<7> [168.978693] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:267:HDMI-A-1]
<7> [168.979242] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [168.979440] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [168.979842] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [168.980054] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [168.980060] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [168.980248] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc3. force bit now 1
<7> [168.986517] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [168.986523] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc3. force bit now 0
<7> [168.986731] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1] disconnected
<7> [168.986854] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:267:HDMI-A-1] EDID override reset
<7> [168.986878] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1]
<7> [168.986884] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:267:HDMI-A-1]
<7> [168.987431] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [168.987629] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [168.988040] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [168.988239] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [168.988244] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [168.988433] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc3. force bit now 1
<7> [168.994757] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [168.994763] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc3. force bit now 0
<7> [168.994963] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1] disconnected
<7> [168.995165] [drm:status_store] [CONNECTOR:273:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [168.995172] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:HDMI-A-2]
<7> [168.995180] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:273:HDMI-A-2]
<7> [168.995494] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:HDMI-A-2] disconnected
<7> [168.995530] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:HDMI-A-2]
<7> [168.995536] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:273:HDMI-A-2]
<7> [168.995835] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:HDMI-A-2] disconnected
<7> [168.995951] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:273:HDMI-A-2] EDID override reset
<7> [168.995973] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:HDMI-A-2]
<7> [168.995978] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:273:HDMI-A-2]
<7> [168.996293] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:HDMI-A-2] disconnected
<6> [168.997163] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [168.997340] [drm:status_store] [CONNECTOR:267:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [168.997349] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1]
<7> [168.997357] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:267:HDMI-A-1]
<7> [168.997934] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [168.998143] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [168.998561] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [168.998760] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [168.998767] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [168.998957] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc3. force bit now 1
<7> [169.005338] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [169.005346] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc3. force bit now 0
<7> [169.005556] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1] disconnected
<7> [169.005617] [drm:status_store] [CONNECTOR:273:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [169.005623] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:HDMI-A-2]
<7> [169.005630] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:273:HDMI-A-2]
<7> [169.005934] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:HDMI-A-2] disconnected
<7> [169.006245] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [169.026944] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0]
<7> [169.026956] [drm:drm_client_modeset_probe]
<7> [169.027012] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1]
<7> [169.027053] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]
<7> [169.027436] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1] disconnected
<7> [169.027447] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:250:DP-2]
<7> [169.027453] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:250:DP-2]
<7> [169.027792] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:250:DP-2] disconnected
<7> [169.027798] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:259:DP-3]
<7> [169.027806] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:259:DP-3]
<7> [169.034385] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC3/DDI TC3/PHY TC3: Base DPCD: 12 14 c4 01 01 00 01 80 02 00 06 00 00 00 80
<7> [169.034415] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC3/DDI TC3/PHY TC3: DPCD: 14 14 c4 01 01 00 01 80 02 00 06 00 00 00 80
<7> [169.036158] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:259:DP-3][ENCODER:258:DDI TC3/PHY TC3][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [169.041341] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC3/DDI TC3/PHY TC3: Base DPCD: 12 14 c4 01 01 00 01 80 02 00 06 00 00 00 80
<7> [169.041375] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC3/DDI TC3/PHY TC3: DPCD: 14 14 c4 01 01 00 01 80 02 00 06 00 00 00 80
<7> [169.043418] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX USBC3/DDI TC3/PHY TC3: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000
<7> [169.045166] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [169.046847] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0
<7> [169.048577] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:258:DDI TC3/PHY TC3] MST support: port: yes, sink: no, modparam: yes
<7> [169.048853] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [169.049150] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
<7> [169.049419] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
<7> [169.076007] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:259:DP-3] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [169.076019] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:259:DP-3] ELD monitor LG HDR 4K
<7> [169.076047] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:259:DP-3] ELD size 32, SAD count 1
<7> [169.076077] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:259:DP-3] VRR capable: no
<7> [169.076369] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:259:DP-3] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [169.078385] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [169.078641] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:259:DP-3] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [169.080697] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:259:DP-3] probed modes :
<7> [169.080705] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 533250 3840 3888 3920 4000 2160 2214 2219 2222 0x48 0x9
<7> [169.080715] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 266640 3840 3848 3992 4000 2160 2214 2219 2222 0x40 0x9
<7> [169.080722] [drm:drm_mode_debug_printmodeline] Modeline "2560x1440": 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x40 0x9
<7> [169.080729] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [169.080736] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [169.080743] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [169.080750] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
<7> [169.080758] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [169.080765] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6
<7> [169.080772] [drm:drm_mode_debug_printmodeline] Modeline "1152x864": 60 81579 1152 1216 1336 1520 864 865 868 895 0x0 0x6
<7> [169.080779] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [169.080786] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [169.080793] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [169.080800] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [169.080807] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [169.080814] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
<7> [169.080821] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
<7> [169.080828] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
<7> [169.080835] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [169.080842] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [169.080850] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1]
<7> [169.080859] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:267:HDMI-A-1]
<7> [169.081511] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [169.081764] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [169.082195] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [169.082448] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [169.082456] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [169.082686] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc3. force bit now 1
<7> [169.089009] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [169.089016] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc3. force bit now 0
<7> [169.089243] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:HDMI-A-1] disconnected
<7> [169.089251] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:HDMI-A-2]
<7> [169.089257] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:273:HDMI-A-2]
<7> [169.089570] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:HDMI-A-2] disconnected
<7> [169.089577] [drm:drm_client_modeset_probe] connector 236 enabled? no
<7> [169.089583] [drm:drm_client_modeset_probe] connector 250 enabled? no
<7> [169.089587] [drm:drm_client_modeset_probe] connector 259 enabled? yes
<7> [169.089591] [drm:drm_client_modeset_probe] connector 267 enabled? no
<7> [169.089595] [drm:drm_client_modeset_probe] connector 273 enabled? no
<7> [169.089645] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [169.089659] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 259
<7> [169.089664] [drm:drm_client_modeset_probe] looking for preferred mode on connector 259 0
<7> [169.089668] [drm:drm_client_modeset_probe] found mode 3840x2160
<7> [169.089672] [drm:drm_client_modeset_probe] picking CRTCs for 3840x2160 config
<7> [169.089698] [drm:drm_client_modeset_probe] desired mode 3840x2160 set on crtc 80 (0,0)
<6> [169.111075] Console: switching to colour frame buffer device 480x135
Created at 2024-03-03 22:45:28