Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Duration 0.05 seconds
Igt-Version 
IGT-Version: 1.28-g40ed74461 (x86_64) (Linux: 6.8.0-rc7-linus-v6.8-rc7-g90d35da658da+ x86_64)
Out 
Using IGT_SRANDOM=1709500680 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.049s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.049s)
Dmesg
<6> [219.445549] Console: switching to colour dummy device 80x25
<6> [219.445784] [IGT] kms_force_connector_basic: executing
<7> [219.448566] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [219.449175] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [219.468558] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [219.469488] [drm:status_store] [CONNECTOR:249:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [219.469496] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [219.469503] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [219.470051] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [219.470183] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [219.470634] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [219.470756] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [219.470763] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [219.470874] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [219.478655] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [219.478658] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [219.478764] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [219.478787] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [219.478791] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [219.479249] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [219.479348] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [219.479724] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [219.479820] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [219.479823] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [219.479913] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [219.487755] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [219.487758] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [219.487858] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [219.487912] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [219.487915] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [219.488379] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [219.488473] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [219.488851] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [219.488944] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [219.488946] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [219.489034] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [219.496787] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [219.496790] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [219.496887] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<6> [219.497117] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [219.497207] [drm:status_store] [CONNECTOR:249:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [219.497212] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [219.497215] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [219.497661] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [219.497757] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [219.498170] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [219.498266] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [219.498271] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [219.498372] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [219.506156] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [219.506161] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [219.506256] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] status updated from disconnected to connected
<7> [219.506295] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] probed modes :
<7> [219.506298] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [219.506302] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [219.506305] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [219.506307] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [219.506319] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [219.506339] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [219.506343] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [219.506871] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [219.506979] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [219.507423] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [219.507543] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [219.507550] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [219.507637] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [219.515401] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [219.515407] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [219.515527] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] probed modes :
<7> [219.515530] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [219.515533] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [219.515536] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [219.515538] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [219.515540] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [219.515662] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:249:HDMI-A-1] EDID override set
<7> [219.515676] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [219.515679] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [219.515799] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:249:HDMI-A-1] ELD monitor IGT
<7> [219.515802] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:249:HDMI-A-1] ELD size 24, SAD count 0
<7> [219.516124] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [219.516230] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [219.516647] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [219.516777] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [219.516835] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [219.516857] [drm:drm_mode_prune_invalid] Not using 800x600 mode: STALE
<7> [219.516861] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [219.516864] [drm:drm_mode_prune_invalid] Not using 848x480 mode: STALE
<7> [219.516868] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] probed modes :
<7> [219.516871] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [219.516874] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [219.516876] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [219.516878] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [219.516880] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [219.516883] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [219.516956] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:249:HDMI-A-1] EDID override set
<7> [219.516989] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [219.516991] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [219.517090] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:249:HDMI-A-1] ELD monitor IGT
<7> [219.517093] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:249:HDMI-A-1] ELD size 24, SAD count 0
<7> [219.517095] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:249:HDMI-A-1] EDID changed, epoch counter 4
<7> [219.517463] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [219.517578] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [219.517975] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [219.518090] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [219.518143] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [219.518146] [drm:drm_mode_prune_invalid] Not using 1400x1050 mode: STALE
<7> [219.518153] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] probed modes :
<7> [219.518155] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [219.518176] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [219.518178] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [219.518181] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [219.518183] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [219.518250] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:249:HDMI-A-1] EDID override reset
<7> [219.518264] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [219.518267] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [219.518709] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [219.518816] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [219.519199] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [219.519322] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [219.519330] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [219.519419] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [219.527352] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [219.527358] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [219.527452] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:249:HDMI-A-1] EDID changed, epoch counter 5
<7> [219.527482] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [219.527485] [drm:drm_mode_prune_invalid] Not using 1920x1080 mode: STALE
<7> [219.527489] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [219.527492] [drm:drm_mode_prune_invalid] Not using 1280x720 mode: STALE
<7> [219.527495] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] probed modes :
<7> [219.527497] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [219.527500] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [219.527502] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [219.527504] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [219.527506] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [219.527594] [drm:status_store] [CONNECTOR:249:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [219.527597] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [219.527601] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [219.528074] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [219.528178] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [219.528593] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [219.528713] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [219.528719] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [219.528807] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [219.536595] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [219.536598] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [219.536689] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] status updated from connected to disconnected
<7> [219.536698] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [219.536798] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [219.536801] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [219.537270] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [219.537399] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [219.537825] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [219.537943] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [219.537946] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [219.538034] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [219.545788] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [219.545790] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [219.545886] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<6> [219.546159] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [219.546243] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [219.546774] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:236:DP-1] EDID override reset
<7> [219.546786] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1]
<7> [219.546789] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]
<7> [219.551964] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80
<7> [219.551982] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80
<7> [219.553335] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [219.557648] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80
<7> [219.557662] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80
<7> [219.559055] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000
<7> [219.560491] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [219.562024] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0
<7> [219.563514] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes
<7> [219.563606] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [219.563693] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
<7> [219.563776] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
<7> [219.583819] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz
<7> [219.583826] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [219.583829] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K
<7> [219.583832] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1
<7> [219.583845] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes
<7> [219.583960] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [219.585478] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [219.585569] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [219.587175] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1] probed modes :
<7> [219.587179] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 533250 3840 3888 3920 4000 2160 2214 2219 2222 0x48 0x9
<7> [219.587182] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 266640 3840 3848 3992 4000 2160 2214 2219 2222 0x40 0x9
<7> [219.587185] [drm:drm_mode_debug_printmodeline] Modeline "2560x1440": 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x40 0x9
<7> [219.587187] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [219.587189] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [219.587192] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [219.587194] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
<7> [219.587196] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [219.587199] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6
<7> [219.587201] [drm:drm_mode_debug_printmodeline] Modeline "1152x864": 60 81768 1152 1216 1336 1520 864 867 871 897 0x0 0x6
<7> [219.587204] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [219.587206] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [219.587208] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [219.587210] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [219.587213] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [219.587215] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
<7> [219.587217] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
<7> [219.587220] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
<7> [219.587222] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [219.587224] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [219.587366] [drm:status_store] [CONNECTOR:249:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [219.587371] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [219.587375] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [219.587846] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [219.587938] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [219.588322] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [219.588439] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [219.588442] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [219.588523] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [219.596281] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [219.596284] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [219.596379] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [219.596404] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [219.596407] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [219.596856] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [219.596938] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [219.597310] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [219.597412] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [219.597415] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [219.597503] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [219.605227] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [219.605229] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [219.605321] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [219.605404] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:249:HDMI-A-1] EDID override reset
<7> [219.605419] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [219.605422] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [219.605887] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [219.605977] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [219.606360] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [219.606448] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [219.606451] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [219.606532] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [219.614304] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [219.614307] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [219.614397] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [219.614470] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:255:DP-2] EDID override reset
<7> [219.614483] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2]
<7> [219.614486] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]
<7> [219.614652] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2] disconnected
<7> [219.614708] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:264:DP-3] EDID override reset
<7> [219.614717] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-3]
<7> [219.614720] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]
<7> [219.643289] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [219.672287] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [219.701287] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [219.730287] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [219.759289] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [219.788287] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [219.817287] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [219.846288] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [219.875288] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [219.904289] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [219.933287] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [219.962287] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [219.991289] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [220.020288] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [220.049287] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [220.078288] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [220.107289] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [220.136288] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [220.165288] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [220.194288] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [220.223290] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [220.252288] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [220.281287] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [220.310288] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [220.339289] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [220.368288] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [220.397287] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [220.426288] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [220.455289] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [220.484287] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [220.513288] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [220.542287] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [220.542418] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110
<7> [220.542429] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-3] disconnected
<7> [220.542526] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:273:DP-4] EDID override reset
<7> [220.542540] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-4]
<7> [220.542544] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]
<7> [220.542714] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-4] disconnected
<7> [220.542777] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:282:DP-5] EDID override reset
<7> [220.542790] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-5]
<7> [220.542793] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]
<7> [220.542945] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-5] disconnected
<6> [220.543365] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [220.543442] [drm:status_store] [CONNECTOR:249:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [220.543446] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [220.543449] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [220.544277] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [220.544383] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [220.544802] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [220.544898] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [220.544901] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [220.544990] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [220.552867] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [220.552870] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [220.552959] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [220.553102] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [220.580624] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0]
<7> [220.580630] [drm:drm_client_modeset_probe]
<7> [220.580660] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1]
<7> [220.580667] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]
<7> [220.586488] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80
<7> [220.586548] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80
<7> [220.588426] i915 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [i915]] [CONNECTOR:236:DP-1][ENCODER:235:DDI B/PHY B][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [220.593730] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: Base DPCD: 12 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80
<7> [220.593775] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 14 14 c4 01 01 00 01 c0 02 00 06 00 00 00 80
<7> [220.595492] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP sink: OUI 00-e0-4c dev-ID Dp1.2 HW-rev 0.0 SW-rev 0.0 quirks 0x0000
<7> [220.597376] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [220.599483] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0
<7> [220.601450] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI B/PHY B] MST support: port: yes, sink: no, modparam: yes
<7> [220.601851] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [220.602069] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
<7> [220.602164] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
<7> [220.624430] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Supported Monitor Refresh rate range is 40 Hz - 61 Hz
<7> [220.624443] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [220.624449] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD monitor LG HDR 4K
<7> [220.624454] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:DP-1] ELD size 32, SAD count 1
<7> [220.624475] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] VRR capable: yes
<7> [220.624678] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [220.626303] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [220.626456] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [220.628328] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1] probed modes :
<7> [220.628333] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 533250 3840 3888 3920 4000 2160 2214 2219 2222 0x48 0x9
<7> [220.628338] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 266640 3840 3848 3992 4000 2160 2214 2219 2222 0x40 0x9
<7> [220.628342] [drm:drm_mode_debug_printmodeline] Modeline "2560x1440": 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x40 0x9
<7> [220.628346] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [220.628350] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [220.628353] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [220.628357] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
<7> [220.628360] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [220.628364] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6
<7> [220.628368] [drm:drm_mode_debug_printmodeline] Modeline "1152x864": 60 81768 1152 1216 1336 1520 864 867 871 897 0x0 0x6
<7> [220.628372] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [220.628375] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [220.628379] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [220.628382] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [220.628386] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [220.628390] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
<7> [220.628393] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
<7> [220.628397] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
<7> [220.628400] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [220.628404] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [220.628408] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [220.628413] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [220.628897] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [220.628981] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [220.629373] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [220.629497] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [220.629500] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [220.629588] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [220.637403] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [220.637406] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [220.637495] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [220.637498] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2]
<7> [220.637501] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]
<7> [220.637646] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2] disconnected
<7> [220.637648] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-3]
<7> [220.637651] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]
<7> [220.666289] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [220.695288] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [220.724288] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [220.753288] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [220.782289] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [220.811288] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [220.840288] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [220.869289] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [220.898288] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [220.927288] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [220.956288] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [220.985288] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [221.014288] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [221.043288] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [221.072288] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [221.101288] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [221.130288] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [221.159288] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [221.188288] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [221.217288] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [221.246289] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [221.275288] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [221.304288] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [221.333288] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [221.362288] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [221.391288] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [221.420288] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [221.449288] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [221.478289] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [221.507288] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [221.536288] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [221.565288] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [221.565425] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110
<7> [221.565437] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-3] disconnected
<7> [221.565442] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-4]
<7> [221.565446] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]
<7> [221.565608] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-4] disconnected
<7> [221.565612] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-5]
<7> [221.565614] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]
<7> [221.565765] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-5] disconnected
<7> [221.565768] [drm:drm_client_modeset_probe] connector 236 enabled? yes
<7> [221.565771] [drm:drm_client_modeset_probe] connector 249 enabled? no
<7> [221.565773] [drm:drm_client_modeset_probe] connector 255 enabled? no
<7> [221.565775] [drm:drm_client_modeset_probe] connector 264 enabled? no
<7> [221.565776] [drm:drm_client_modeset_probe] connector 273 enabled? no
<7> [221.565778] [drm:drm_client_modeset_probe] connector 282 enabled? no
<7> [221.565798] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [221.565805] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236
<7> [221.565807] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0
<7> [221.565809] [drm:drm_client_modeset_probe] found mode 3840x2160
<7> [221.565811] [drm:drm_client_modeset_probe] picking CRTCs for 3840x2160 config
<7> [221.565820] [drm:drm_client_modeset_probe] desired mode 3840x2160 set on crtc 80 (0,0)
<6> [221.597633] Console: switching to colour frame buffer device 480x135
Created at 2024-03-03 22:45:27