Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 1.28-g40ed74461 (x86_64) (Linux: 6.8.0-rc7-linus-v6.8-rc7-g90d35da658da+ x86_64)
Out 
Using IGT_SRANDOM=1709500717 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.029s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.029s)
Dmesg
<6> [263.704524] Console: switching to colour dummy device 80x25
<6> [263.704702] [IGT] kms_force_connector_basic: executing
<7> [263.706794] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [263.707461] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [263.724141] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [263.724853] [drm:status_store] [CONNECTOR:245:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [263.724860] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [263.724866] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [263.725074] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] disconnected
<7> [263.725101] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [263.725105] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [263.725315] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] disconnected
<7> [263.725373] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [263.725376] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [263.725541] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] disconnected
<6> [263.725747] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [263.725847] [drm:status_store] [CONNECTOR:245:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [263.725852] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [263.725856] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [263.726334] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [263.726457] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [263.726861] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [263.726990] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [263.727000] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [263.727136] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [263.734332] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [263.734338] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [263.734435] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] status updated from disconnected to connected
<7> [263.734524] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] probed modes :
<7> [263.734528] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [263.734532] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [263.734536] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [263.734539] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [263.734542] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [263.734568] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [263.734571] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [263.735018] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [263.735152] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [263.735569] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [263.735662] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [263.735668] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [263.735752] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [263.742823] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [263.742829] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [263.742940] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] probed modes :
<7> [263.742942] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [263.742946] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [263.742948] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [263.742950] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [263.742953] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [263.743121] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:245:HDMI-A-1] EDID override set
<7> [263.743134] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [263.743137] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [263.743248] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:245:HDMI-A-1] ELD monitor IGT
<7> [263.743252] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:245:HDMI-A-1] ELD size 24, SAD count 0
<7> [263.743559] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [263.743647] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [263.744071] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [263.744165] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [263.744223] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [263.744227] [drm:drm_mode_prune_invalid] Not using 800x600 mode: STALE
<7> [263.744231] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [263.744234] [drm:drm_mode_prune_invalid] Not using 848x480 mode: STALE
<7> [263.744238] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] probed modes :
<7> [263.744240] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [263.744243] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [263.744245] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [263.744247] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [263.744250] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [263.744252] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [263.744352] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:245:HDMI-A-1] EDID override set
<7> [263.744367] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [263.744370] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [263.744481] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:245:HDMI-A-1] ELD monitor IGT
<7> [263.744484] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:245:HDMI-A-1] ELD size 24, SAD count 0
<7> [263.744487] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:245:HDMI-A-1] EDID changed, epoch counter 4
<7> [263.744795] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [263.744884] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [263.745290] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [263.745383] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [263.745434] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [263.745438] [drm:drm_mode_prune_invalid] Not using 1400x1050 mode: STALE
<7> [263.745442] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] probed modes :
<7> [263.745444] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [263.745446] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [263.745449] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [263.745451] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [263.745454] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [263.745516] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:245:HDMI-A-1] EDID override reset
<7> [263.745529] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [263.745531] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [263.745958] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [263.746061] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [263.746457] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [263.746546] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [263.746552] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [263.746634] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [263.753650] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [263.753655] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [263.753732] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:245:HDMI-A-1] EDID changed, epoch counter 5
<7> [263.753761] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [263.753764] [drm:drm_mode_prune_invalid] Not using 1920x1080 mode: STALE
<7> [263.753768] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [263.753770] [drm:drm_mode_prune_invalid] Not using 1280x720 mode: STALE
<7> [263.753774] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] probed modes :
<7> [263.753776] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [263.753778] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [263.753780] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [263.753782] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [263.753785] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [263.753873] [drm:status_store] [CONNECTOR:245:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [263.753877] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [263.753881] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [263.754098] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] status updated from connected to disconnected
<7> [263.754107] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] disconnected
<7> [263.754133] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [263.754137] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [263.754271] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] disconnected
<6> [263.754449] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [263.754518] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [263.755039] [drm:status_store] [CONNECTOR:236:eDP-1] force updated from 0 to 0 or reprobing
<7> [263.755044] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1]
<7> [263.755048] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]
<7> [263.756065] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [263.756749] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [263.756848] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [263.756944] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [263.757057] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [263.757164] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [263.757168] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [263.757171] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor
<7> [263.757174] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0
<7> [263.757184] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no
<7> [263.757278] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [263.758104] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [263.758195] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [263.758926] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes :
<7> [263.758930] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [263.758934] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [263.758958] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1]
<7> [263.758971] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]
<7> [263.759790] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [263.760462] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [263.760556] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [263.760649] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [263.760739] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [263.760844] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [263.760848] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [263.760851] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor
<7> [263.760853] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0
<7> [263.760862] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no
<7> [263.760954] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [263.761771] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [263.761863] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [263.762550] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes :
<7> [263.762553] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [263.762556] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [263.762621] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:236:eDP-1] EDID override reset
<7> [263.762632] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1]
<7> [263.762635] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]
<7> [263.763441] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [263.764068] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [263.764157] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [263.764250] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [263.764340] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [263.764436] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [263.764440] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [263.764443] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor
<7> [263.764446] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0
<7> [263.764454] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no
<7> [263.764540] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [263.765350] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [263.765446] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [263.766117] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes :
<7> [263.766120] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [263.766123] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [263.766223] [drm:status_store] [CONNECTOR:245:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [263.766227] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [263.766231] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [263.766394] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] disconnected
<7> [263.766413] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [263.766416] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [263.766550] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] disconnected
<7> [263.766602] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:245:HDMI-A-1] EDID override reset
<7> [263.766613] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [263.766616] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [263.766749] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] disconnected
<7> [263.766808] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:254:DP-1] EDID override reset
<7> [263.766818] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:254:DP-1]
<7> [263.766821] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:254:DP-1]
<7> [263.766989] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:254:DP-1] disconnected
<7> [263.767048] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:264:DP-2] EDID override reset
<7> [263.767058] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-2]
<7> [263.767061] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-2]
<7> [263.795971] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [263.824970] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [263.853970] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [263.882970] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [263.911971] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [263.940970] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [263.969969] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [263.998969] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [264.027972] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [264.056970] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [264.085969] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [264.114970] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [264.143971] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [264.172971] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [264.201969] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [264.230970] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [264.259971] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [264.288970] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [264.317970] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [264.346970] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [264.375971] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [264.404969] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [264.433970] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [264.462970] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [264.491972] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [264.520970] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [264.549970] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [264.578970] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [264.607971] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [264.636970] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [264.665970] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [264.694969] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [264.695098] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110
<7> [264.695109] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-2] disconnected
<7> [264.695193] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:273:DP-3] EDID override reset
<7> [264.695206] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-3]
<7> [264.695209] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-3]
<7> [264.695374] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-3] disconnected
<7> [264.695431] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:282:DP-4] EDID override reset
<7> [264.695440] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-4]
<7> [264.695443] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-4]
<7> [264.695586] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-4] disconnected
<6> [264.695896] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [264.695972] [drm:status_store] [CONNECTOR:245:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [264.695976] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [264.695979] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [264.696153] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] disconnected
<7> [264.696185] [drm:status_store] [CONNECTOR:236:eDP-1] force updated from 0 to 0 or reprobing
<7> [264.696189] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1]
<7> [264.696192] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]
<7> [264.697013] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [264.697666] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [264.697758] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [264.697844] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [264.697925] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [264.698033] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [264.698037] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [264.698040] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor
<7> [264.698043] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0
<7> [264.698051] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no
<7> [264.698147] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [264.698980] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [264.699072] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [264.699765] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes :
<7> [264.699769] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [264.699773] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [264.699912] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [264.719880] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0]
<7> [264.719885] [drm:drm_client_modeset_probe]
<7> [264.719909] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1]
<7> [264.719913] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]
<7> [264.720843] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [264.721746] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [264.721841] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [264.721929] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [264.722038] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [264.722331] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [264.722344] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [264.722354] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor
<7> [264.722362] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0
<7> [264.722390] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no
<7> [264.722654] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [264.723459] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [264.723582] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [264.724482] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes :
<7> [264.724485] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [264.724489] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [264.724492] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1]
<7> [264.724495] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:245:HDMI-A-1]
<7> [264.724642] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:HDMI-A-1] disconnected
<7> [264.724646] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:254:DP-1]
<7> [264.724650] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:254:DP-1]
<7> [264.724840] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:254:DP-1] disconnected
<7> [264.724849] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-2]
<7> [264.724857] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-2]
<7> [264.752970] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [264.781970] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [264.811970] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [264.840970] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [264.869970] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [264.898971] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [264.927970] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [264.956970] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [264.985970] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [265.014971] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [265.043971] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [265.072970] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [265.101970] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [265.130971] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [265.159970] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [265.188970] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [265.217970] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [265.246971] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [265.275970] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [265.304971] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [265.333971] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [265.362971] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [265.388970] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [265.417970] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [265.446971] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [265.475970] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [265.504970] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [265.533970] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [265.562971] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [265.591971] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [265.620970] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [265.649970] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [265.650113] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110
<7> [265.650126] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-2] disconnected
<7> [265.650132] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-3]
<7> [265.650136] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-3]
<7> [265.650292] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-3] disconnected
<7> [265.650295] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-4]
<7> [265.650298] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-4]
<7> [265.650445] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-4] disconnected
<7> [265.650448] [drm:drm_client_modeset_probe] connector 236 enabled? yes
<7> [265.650452] [drm:drm_client_modeset_probe] connector 245 enabled? no
<7> [265.650454] [drm:drm_client_modeset_probe] connector 254 enabled? no
<7> [265.650456] [drm:drm_client_modeset_probe] connector 264 enabled? no
<7> [265.650457] [drm:drm_client_modeset_probe] connector 273 enabled? no
<7> [265.650459] [drm:drm_client_modeset_probe] connector 282 enabled? no
<7> [265.650482] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [265.650489] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236
<7> [265.650491] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0
<7> [265.650494] [drm:drm_client_modeset_probe] found mode 3840x2160
<7> [265.650496] [drm:drm_client_modeset_probe] picking CRTCs for 3840x2160 config
<7> [265.650507] [drm:drm_client_modeset_probe] desired mode 3840x2160 set on crtc 80 (0,0)
<6> [265.687245] Console: switching to colour frame buffer device 480x135
Created at 2024-03-03 22:45:27