igt@kms_pm_rpm@basic-pci-d3-state on bat-adln-1@linus-v6.8-rc7 Test details

Detail	Value
Duration	unknown
Igt-Version	IGT-Version: 1.28-g40ed74461 (x86_64) (Linux: 6.8.0-rc7-linus-v6.8-rc7-g90d35da658da+ x86_64)
Out	Using IGT_SRANDOM=1709500605 for randomisation Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: 0000:00:02.0@ffff88810906b4b0 has 1/1 users at track_intel_runtime_pm_wakeref.part.0+0x30/0x60 [i915] __intel_display_power_put_async+0x3d/0x160 [i915] intel_atomic_commit_tail+0xaef/0xf80 [i915] intel_atomic_commit+0x321/0x370 [i915] drm_atomic_commit+0x92/0xc0 drm_atomic_helper_set_config+0x77/0xc0 drm_mode_setcrtc+0x1f4/0x740 drm_ioctl_kernel+0xa8/0x100 drm_ioctl+0x223/0x430 __x64_sys_ioctl+0x79/0xb0 do_syscall_64+0x6f/0x140 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Starting subtest: basic-pci-d3-state Subtest basic-pci-d3-state: SUCCESS (4.589s) This test caused an abort condition: Lockdep not active /proc/lockdep_stats contents: lock-classes: 1872 [max: 8192] direct dependencies: 18626 [max: 32768] indirect dependencies: 146433 all direct dependencies: 362200 dependency chains: 27422 [max: 131072] dependency chain hlocks used: 114645 [max: 655360] dependency chain hlocks lost: 0 in-hardirq chains: 269 in-softirq chains: 599 in-process chains: 26554 stack-trace entries: 169678 [max: 1048576] number of stack traces: 8607 number of stack hash chains: 6677 combined max dependencies: 6942704 hardirq-safe locks: 100 hardirq-unsafe locks: 1067 softirq-safe locks: 212 softirq-unsafe locks: 979 irq-safe locks: 222 irq-unsafe locks: 1067 hardirq-read-safe locks: 3 hardirq-read-unsafe locks: 399 softirq-read-safe locks: 7 softirq-read-unsafe locks: 394 irq-read-safe locks: 7 irq-read-unsafe locks: 399 uncategorized locks: 295 unused locks: 1 max locking depth: 16 max bfs queue depth: 429 max lock class index: 1871 chain lookup misses: 27595 chain lookup hits: 137126892 cyclic checks: 28032 redundant checks: 0 redundant links: 0 find-mask forwards checks: 4545 find-mask backwards checks: 2841 hardirq on events: 76340959 hardirq off events: 76340955 redundant hardirq ons: 52 redundant hardirq offs: 20 softirq on events: 283053 softirq off events: 283053 redundant softirq ons: 0 redundant softirq offs: 0 debug_locks: 0 zapped classes: 1 zapped lock chains: 107 large chain blocks: 1
Err	Starting subtest: basic-pci-d3-state Subtest basic-pci-d3-state: SUCCESS (4.589s)
Dmesg Scroll to first warning	<6> [214.324167] Console: switching to colour dummy device 80x25 <6> [214.324690] [IGT] kms_pm_rpm: executing <7> [214.327620] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [214.335022] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] <7> [214.335036] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1] <7> [214.335275] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected <7> [214.335735] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1] <7> [214.335743] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:203:DP-1] <7> [214.335980] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1] disconnected <7> [214.336748] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2] <7> [214.336759] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:212:DP-2] <7> [214.337097] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2] disconnected <7> [214.337876] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1] <7> [214.337886] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1] <7> [214.338963] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [214.339789] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7> [214.340061] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [214.340317] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [214.340568] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000 <7> [214.340878] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [214.340893] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [214.340902] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor <7> [214.340909] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0 <7> [214.340945] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no <7> [214.341220] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [214.342365] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [214.342733] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [214.343957] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1] probed modes : <7> [214.343974] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa <7> [214.343986] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa <7> [214.344054] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] <7> [214.344068] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1] <7> [214.344501] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected <7> [214.344549] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1] <7> [214.344558] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:203:DP-1] <7> [214.345020] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1] disconnected <7> [214.345065] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2] <7> [214.345075] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:212:DP-2] <7> [214.345513] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2] disconnected <7> [214.345591] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1] <7> [214.345601] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1] <7> [214.346859] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [214.347869] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7> [214.348235] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [214.348542] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [214.348784] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000 <7> [214.348933] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [214.348942] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [214.348946] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor <7> [214.348950] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0 <7> [214.348975] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no <7> [214.349214] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [214.350534] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [214.350929] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [214.352204] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1] probed modes : <7> [214.352221] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa <7> [214.352235] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa <7> [214.352428] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] <7> [214.352443] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1] <7> [214.352930] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected <7> [214.353077] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1] <7> [214.353088] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:203:DP-1] <7> [214.353546] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1] disconnected <7> [214.353710] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2] <7> [214.353720] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:212:DP-2] <7> [214.354163] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2] disconnected <7> [214.354691] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:221] <7> [215.396773] [drm:drm_mode_setcrtc] [CRTC:80:pipe A] <7> [215.396967] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [215.397404] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [215.397794] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [215.398149] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [215.398485] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7843931/8388608 link 522928/524288, found tu 0, data 0/0 link 0/0) <7> [215.399386] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [215.399794] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [215.400164] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3840, found 0) <7> [215.400523] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 4000, found 0) <7> [215.400897] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3840, found 0) <7> [215.401266] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 4000, found 0) <7> [215.401432] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3888, found 0) <7> [215.401575] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3920, found 0) <7> [215.401723] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 2160, found 0) <7> [215.401866] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 2160, found 0) <7> [215.401999] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 2163, found 0) <7> [215.402124] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 2168, found 0) <7> [215.402250] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 2244, found 0) <7> [215.402376] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 2244, found 0) <7> [215.402501] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3840, found 0) <7> [215.402626] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 4000, found 0) <7> [215.402760] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3840, found 0) <7> [215.402903] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 4000, found 0) <7> [215.403036] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3888, found 0) <7> [215.403161] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3920, found 0) <7> [215.403286] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 2160, found 0) <7> [215.403411] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 2160, found 0) <7> [215.403536] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 2163, found 0) <7> [215.403669] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 2168, found 0) <7> [215.403812] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 2244, found 0) <7> [215.403942] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 2244, found 0) <7> [215.404067] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [215.404192] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [215.404317] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [215.404443] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0) <7> [215.404569] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 538600, found 0) <7> [215.404701] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 538600, found 0) <7> [215.404844] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [215.404975] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [215.405104] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:80:pipe A] releasing DPLL 0 <7> [215.405272] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no <7> [215.405393] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [215.405549] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 4027) -> ( 0 - 0), size 4027 -> 0 <7> [215.405690] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb (4027 - 4096) -> ( 0 - 0), size 69 -> 0 <7> [215.405827] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [215.405962] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [215.406081] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [215.406197] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [215.406326] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 0 num active planes 0 <7> [215.406460] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10928 required 0 <7> [215.406609] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15758 required 0 <7> [215.406767] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 16388 required 0 <7> [215.406918] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 17250 required 0 <7> [215.407064] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 0 <7> [215.407192] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 40533 required 0 <7> [215.407336] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 0 <7> [215.407498] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change <7> [215.407654] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 179200 kHz, actual 179200 kHz <7> [215.407805] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [215.407958] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: no [modeset] <7> [215.408102] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no <7> [215.408244] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7> [215.408386] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7> [215.408532] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7> [215.408706] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7> [215.408886] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7> [215.409159] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2 <7> [215.414288] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [215.618819] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:185:eDP-1] set backlight PWM = 0 <7> [215.620834] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [215.631170] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 turn panel power off <7> [215.631870] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 wait for panel power off time <7> [215.632412] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7> [215.686958] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [215.686946] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7> [215.687655] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:184:DDI A/PHY A] - long <7> [215.687824] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A <7> [215.688272] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [215.688583] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:80:pipe A] <7> [215.688990] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:184:DDI A/PHY A] <7> [215.689378] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 <7> [215.690073] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7> [215.690797] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 179200 kHz, VCO 537600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [215.691610] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] aud_ts_cdclk set to M=60, N=448 <7> [215.692199] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:184:DDI A/PHY A] <7> [215.692802] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:193:DDI B/PHY B] <7> [215.693266] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:202:DDI TC1/PHY TC1] <7> [215.693736] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:204:DP-MST A] <7> [215.694155] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:205:DP-MST B] <7> [215.694559] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:206:DP-MST C] <7> [215.694957] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:211:DDI TC2/PHY TC2] <7> [215.695342] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:213:DP-MST A] <7> [215.695727] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:214:DP-MST B] <7> [215.696100] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:215:DP-MST C] <7> [215.696481] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:185:eDP-1] <7> [215.697002] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [215.697469] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [215.697886] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TBT PLL <7> [215.698287] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 1 <7> [215.698693] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 2 <7> [215.699086] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 3 <7> [215.699492] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 4 <7> [215.699976] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7> [215.700457] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [215.701013] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_A <7> [215.701490] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7> [215.702383] [drm:drm_mode_setcrtc] [CRTC:131:pipe B] <7> [215.702765] [drm:drm_mode_setcrtc] [CRTC:182:pipe C] <7> [215.721050] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [215.721834] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [215.722438] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [215.723414] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.725467] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [215.728297] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [215.729488] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [215.730419] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [215.731239] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [215.731843] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [215.732225] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [215.732697] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [215.806476] [IGT] kms_pm_rpm: starting subtest basic-pci-d3-state <7> [215.817037] [drm:drm_mode_setcrtc] [CRTC:80:pipe A] <7> [215.829738] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [215.830014] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [215.830396] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [215.830809] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [215.831248] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [215.831699] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [215.832107] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [215.833184] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [215.833560] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [215.834074] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [215.836909] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [215.837168] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [215.841988] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [215.842594] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [215.842839] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.843035] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [215.843567] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [215.844771] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1] <7> [215.845002] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7> [215.845397] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 turning VDD on <7> [215.845559] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [215.845712] [drm:drm_mode_setcrtc] [CRTC:131:pipe B] <7> [216.291110] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [216.291532] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [216.292047] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [216.292383] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [216.354163] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7> [216.354859] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:184:DDI A/PHY A] - long <7> [216.355435] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [216.356111] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:184:DDI A/PHY A] <7> [216.501142] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [216.502853] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7> [216.503246] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [216.503579] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [216.503936] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000 <7> [216.504347] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [216.504360] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [216.504364] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor <7> [216.504369] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0 <7> [216.504406] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no <7> [216.504540] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [216.505448] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [216.505579] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [216.506334] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1] <7> [216.506874] [drm:drm_mode_setcrtc] [CRTC:182:pipe C] <7> [216.506861] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:203:DP-1] <7> [216.507208] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:212:DP-2] <4> [218.388157] <4> [218.388169] ====================================================== <4> [218.388173] WARNING: possible circular locking dependency detected <4> [218.388176] 6.8.0-rc7-linus-v6.8-rc7-g90d35da658da+ #1 Not tainted <4> [218.388180] ------------------------------------------------------ <4> [218.388182] kworker/1:1H/92 is trying to acquire lock: <4> [218.388185] ffff8881102a9978 (&gt->reset.backoff_srcu){++++}-{0:0}, at: _intel_gt_reset_lock+0x35/0x380 [i915] <4> [218.388532] but task is already holding lock: <4> [218.388535] ffffc900003abe58 ((work_completion)(&(&guc->timestamp.work)->work)){+.+.}-{0:0}, at: process_scheduled_works+0x264/0x530 <4> [218.388549] which lock already depends on the new lock. <4> [218.388551] the existing dependency chain (in reverse order) is: <4> [218.388553] -> #3 ((work_completion)(&(&guc->timestamp.work)->work)){+.+.}-{0:0}: <4> [218.388560] lock_acquire+0xd8/0x2d0 <4> [218.388567] __flush_work+0x69/0x420 <4> [218.388572] __cancel_work_timer+0x14f/0x1f0 <4> [218.388577] intel_guc_submission_reset_prepare+0x81/0x4b0 [i915] <4> [218.388946] intel_uc_reset_prepare+0x4a/0xb0 [i915] <4> [218.389298] reset_prepare+0x21/0x60 [i915] <4> [218.389571] intel_gt_reset+0x1cb/0x480 [i915] <4> [218.389839] intel_gt_reset_global+0xeb/0x160 [i915] <4> [218.390106] intel_gt_handle_error+0x372/0x420 [i915] <4> [218.390373] intel_gt_debugfs_reset_store+0x5c/0xc0 [i915] <4> [218.390624] i915_wedged_set+0x1d/0x40 [i915] <4> [218.390851] simple_attr_write_xsigned.constprop.0+0xb4/0x110 <4> [218.390859] full_proxy_write+0x58/0x80 <4> [218.390865] vfs_write+0xcb/0x560 <4> [218.390870] ksys_write+0x64/0xe0 <4> [218.390874] do_syscall_64+0x6f/0x140 <4> [218.390879] entry_SYSCALL_64_after_hwframe+0x6e/0x76 <4> [218.390886] -> #2 (&gt->reset.mutex){+.+.}-{3:3}: <4> [218.390892] lock_acquire+0xd8/0x2d0 <4> [218.390897] i915_gem_shrinker_taints_mutex+0x31/0x50 [i915] <4> [218.391184] intel_gt_init_reset+0x65/0x80 [i915] <4> [218.391432] intel_gt_common_init_early+0xd9/0x120 [i915] <4> [218.391668] intel_root_gt_init_early+0x5e/0x70 [i915] <4> [218.391897] i915_driver_probe+0x1e6/0xd30 [i915] <4> [218.392095] i915_pci_probe+0xd5/0x200 [i915] <4> [218.392237] pci_device_probe+0x95/0x120 <4> [218.392240] really_probe+0x164/0x3c0 <4> [218.392244] __driver_probe_device+0x73/0x160 <4> [218.392246] driver_probe_device+0x19/0xa0 <4> [218.392248] __driver_attach+0xb6/0x180 <4> [218.392250] bus_for_each_dev+0x77/0xd0 <4> [218.392251] bus_add_driver+0x114/0x210 <4> [218.392253] driver_register+0x5b/0x110 <4> [218.392254] 0xffffffffa0350033 <4> [218.392264] do_one_initcall+0x57/0x270 <4> [218.392266] do_init_module+0x5f/0x210 <4> [218.392269] load_module+0x1d1a/0x1f80 <4> [218.392270] init_module_from_file+0x86/0xd0 <4> [218.392271] idempotent_init_module+0x17c/0x230 <4> [218.392273] __x64_sys_finit_module+0x56/0xb0 <4> [218.392274] do_syscall_64+0x6f/0x140 <4> [218.392276] entry_SYSCALL_64_after_hwframe+0x6e/0x76 <4> [218.392277] -> #1 (fs_reclaim){+.+.}-{0:0}: <4> [218.392280] lock_acquire+0xd8/0x2d0 <4> [218.392282] fs_reclaim_acquire+0xa1/0xd0 <4> [218.392285] __alloc_pages+0xeb/0x2e0 <4> [218.392288] pte_alloc_one+0x1d/0x110 <4> [218.392291] __pte_alloc+0x26/0x120 <4> [218.392294] __apply_to_page_range+0x66f/0x740 <4> [218.392296] remap_io_mapping+0x70/0x120 [i915] <4> [218.392381] vm_fault_gtt+0x47e/0xe80 [i915] <4> [218.392490] __do_fault+0x2b/0xf0 <4> [218.392492] do_pte_missing+0x681/0xf40 <4> [218.392493] __handle_mm_fault+0x691/0x800 <4> [218.392494] handle_mm_fault+0xc3/0x240 <4> [218.392495] do_user_addr_fault+0x431/0x9e0 <4> [218.392497] exc_page_fault+0x68/0x1a0 <4> [218.392499] asm_exc_page_fault+0x26/0x30 <4> [218.392501] -> #0 (&gt->reset.backoff_srcu){++++}-{0:0}: <4> [218.392503] check_prev_add+0xe9/0xce0 <4> [218.392505] __lock_acquire+0x17c6/0x2320 <4> [218.392506] lock_acquire+0xd8/0x2d0 <4> [218.392508] _intel_gt_reset_lock+0x50/0x380 [i915] <4> [218.392607] guc_timestamp_ping+0x73/0x130 [i915] <4> [218.392734] process_scheduled_works+0x2db/0x530 <4> [218.392735] worker_thread+0x18c/0x350 <4> [218.392737] kthread+0xfe/0x130 <4> [218.392740] ret_from_fork+0x2c/0x50 <4> [218.392742] ret_from_fork_asm+0x1b/0x30 <4> [218.392743] other info that might help us debug this: <4> [218.392744] Chain exists of: &gt->reset.backoff_srcu --> &gt->reset.mutex --> (work_completion)(&(&guc->timestamp.work)->work) <4> [218.392747] Possible unsafe locking scenario: <4> [218.392748] CPU0 CPU1 <4> [218.392749] ---- ---- <4> [218.392749] lock((work_completion)(&(&guc->timestamp.work)->work)); <4> [218.392751] lock(&gt->reset.mutex); <4> [218.392752] lock((work_completion)(&(&guc->timestamp.work)->work)); <4> [218.392754] lock(&gt->reset.backoff_srcu); <4> [218.392755] DEADLOCK * <4> [218.392756] 2 locks held by kworker/1:1H/92: <4> [218.392757] #0: ffff888100079538 ((wq_completion)events_highpri){+.+.}-{0:0}, at: process_scheduled_works+0x264/0x530 <4> [218.392761] #1: ffffc900003abe58 ((work_completion)(&(&guc->timestamp.work)->work)){+.+.}-{0:0}, at: process_scheduled_works+0x264/0x530 <4> [218.392764] stack backtrace: <4> [218.392766] CPU: 1 PID: 92 Comm: kworker/1:1H Not tainted 6.8.0-rc7-linus-v6.8-rc7-g90d35da658da+ #1 <4> [218.392768] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-N LP5 RVP, BIOS ADLNFWI1.R00.3362.A00.2208311605 08/31/2022 <4> [218.392770] Workqueue: events_highpri guc_timestamp_ping [i915] <4> [218.392896] Call Trace: <4> [218.392898] <TASK> <4> [218.392899] dump_stack_lvl+0x64/0xb0 <4> [218.392904] check_noncircular+0x15e/0x180 <4> [218.392906] check_prev_add+0xe9/0xce0 <4> [218.392909] __lock_acquire+0x17c6/0x2320 <4> [218.392911] lock_acquire+0xd8/0x2d0 <4> [218.392913] ? _intel_gt_reset_lock+0x35/0x380 [i915] <4> [218.393014] ? track_intel_runtime_pm_wakeref.part.0+0x30/0x60 [i915] <4> [218.393097] ? guc_timestamp_ping+0x34/0x130 [i915] <4> [218.393221] ? process_scheduled_works+0x2db/0x530 <4> [218.393222] ? worker_thread+0x18c/0x350 <4> [218.393224] ? _intel_gt_reset_lock+0x35/0x380 [i915] <4> [218.393324] _intel_gt_reset_lock+0x50/0x380 [i915] <4> [218.393423] ? _intel_gt_reset_lock+0x35/0x380 [i915] <4> [218.393521] ? _raw_spin_unlock_irqrestore+0x41/0x70 <4> [218.393525] guc_timestamp_ping+0x73/0x130 [i915] <4> [218.393648] ? process_scheduled_works+0x264/0x530 <4> [218.393650] process_scheduled_works+0x2db/0x530 <4> [218.393652] ? __pfx_worker_thread+0x10/0x10 <4> [218.393654] worker_thread+0x18c/0x350 <4> [218.393656] ? __pfx_worker_thread+0x10/0x10 <4> [218.393657] kthread+0xfe/0x130 <4> [218.393659] ? __pfx_kthread+0x10/0x10 <4> [218.393662] ret_from_fork+0x2c/0x50 <4> [218.393663] ? __pfx_kthread+0x10/0x10 <4> [218.393665] ret_from_fork_asm+0x1b/0x30 <4> [218.393668] </TASK> <7> [219.538939] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 turning VDD off <7> [219.539498] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [219.539863] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7> [219.540269] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [219.540668] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [219.541054] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [219.541772] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.541811] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7> [219.542150] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [219.542220] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:184:DDI A/PHY A] - long <7> [219.542583] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [219.542979] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:184:DDI A/PHY A] <7> [219.543158] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [219.544200] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [219.544844] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [219.545094] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [219.545299] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [219.545425] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [219.545575] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [219.617978] [drm:drm_mode_setcrtc] [CRTC:80:pipe A] <7> [219.618070] [drm:drm_mode_setcrtc] [CONNECTOR:185:eDP-1] <7> [219.618254] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:185:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [219.619070] i915 0000:00:02.0: [drm:intel_dp_compute_config_link_bpp_limits [i915]] [ENCODER:184:DDI A/PHY A][CRTC:80:pipe A] DP link limits: pixel clock 538600 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000 <7> [219.619692] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30 <7> [219.620248] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 2019750 available 2160000 <7> [219.620816] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [219.621443] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:184:DDI A/PHY A] [CRTC:80:pipe A] <7> [219.621951] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [219.622504] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [219.622929] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [219.623108] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [219.623262] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [219.623396] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [219.623559] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3840) <7> [219.623712] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 4000) <7> [219.623877] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3840) <7> [219.624031] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 4000) <7> [219.624174] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3888) <7> [219.624322] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3920) <7> [219.624497] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 2160) <7> [219.624684] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 2160) <7> [219.624858] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 2163) <7> [219.625020] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 2168) <7> [219.625158] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 2244) <7> [219.625282] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 2244) <7> [219.625405] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3840) <7> [219.625543] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 4000) <7> [219.625903] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3840) <7> [219.626071] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 4000) <7> [219.626219] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3888) <7> [219.626366] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3920) <7> [219.626509] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 2160) <7> [219.626655] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 2160) <7> [219.626811] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 2163) <7> [219.626958] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 2168) <7> [219.627125] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 2244) <7> [219.627301] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 2244) <7> [219.627489] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [219.627667] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [219.627839] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [219.627991] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30) <7> [219.628140] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [219.628323] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [219.628551] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [219.628870] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [219.629063] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4027), size 0 -> 4027 <7> [219.629210] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb ( 0 - 0) -> (4027 - 4096), size 0 -> 69 <7> [219.629372] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [219.629540] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0 <7> [219.629714] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201 <7> [219.629884] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207 <7> [219.630045] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 2154400 num active planes 1 <7> [219.630209] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10928 required 2263 <7> [219.630354] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15758 required 2263 <7> [219.630496] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 16388 required 2263 <7> [219.630643] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 17250 required 2263 <7> [219.630815] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 2263 <7> [219.630968] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 40533 required 2263 <7> [219.631117] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 2263 <7> [219.631312] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (269300 kHz) > [CRTC:80:pipe A] min cdclk (0 kHz) <7> [219.631491] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (42079 kHz) > old min cdclk (0 kHz) <7> [219.631685] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change <7> [219.632040] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 307200 kHz, actual 307200 kHz <7> [219.632346] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [219.632708] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:80:pipe A] allocated DPLL 0 <7> [219.632875] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:80:pipe A] reserving DPLL 0 <7> [219.633025] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [modeset] <7> [219.633171] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [219.633314] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7> [219.633467] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [219.633628] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [219.633806] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7> [219.633979] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [219.634144] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7843931, data_n: 8388608, link_m: 522928, link_n: 524288, tu: 64 <7> [219.634289] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [219.634433] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: disabled <7> [219.634573] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [219.634744] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, psr2: enabled, panel replay: disabled, selective fetch: enabled <7> [219.634922] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7> [219.635082] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [219.635239] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0 <7> [219.635242] i915 0000:00:02.0: pixelformat: RGB <7> [219.635243] i915 0000:00:02.0: colorimetry: sRGB <7> [219.635244] i915 0000:00:02.0: bpc: 0 <7> [219.635246] i915 0000:00:02.0: dynamic range: VESA range <7> [219.635247] i915 0000:00:02.0: content type: Not defined <7> [219.635249] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7> [219.635394] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa <7> [219.635536] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa <7> [219.635681] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=538600, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2160 vb=2160-2244 vs=2163-2168 vt=2244, flags=0xa <7> [219.635851] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa <7> [219.636026] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=538600, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2160 vb=2160-2244 vs=2163-2168 vt=2244, flags=0xa <7> [219.636201] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3840x2160+0+0, pixel rate 538600 <7> [219.636366] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 60, ips linetime: 0 <7> [219.636511] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [219.636657] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [219.636820] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [219.636989] i915 0000:00:02.0: [drm:icl_dump_hw_state [i915]] dpll_hw_state: cfgcr0: 0xe001a5, cfgcr1: 0x48, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [219.637172] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [219.637351] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [219.637526] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [219.637697] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [219.637868] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [219.638011] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [219.638150] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [219.638289] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [219.638427] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [219.638571] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [219.638719] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [219.638894] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [219.639064] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:221] 3840x2160 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [219.639233] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [219.639394] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3840.000000x2160.000000+0.000000+0.000000 dst: 3840x2160+0+0 <7> [219.639551] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7> [219.639700] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7> [219.639871] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7> [219.640013] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7> [219.640153] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7> [219.650936] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [219.651156] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [219.651485] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [219.651835] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [219.652418] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [219.653136] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [219.653721] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [219.654150] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [219.654472] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [219.654921] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [219.659761] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [219.660074] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [219.663441] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [219.664078] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [219.665666] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.668672] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [219.669159] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [219.669799] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7> [219.670106] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [219.670460] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] aud_ts_cdclk set to M=60, N=768 <7> [219.670716] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:184:DDI A/PHY A] <7> [219.670964] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:193:DDI B/PHY B] <7> [219.671176] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:202:DDI TC1/PHY TC1] <7> [219.671363] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:204:DP-MST A] <7> [219.671572] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:205:DP-MST B] <7> [219.671802] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:206:DP-MST C] <7> [219.672042] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:211:DDI TC2/PHY TC2] <7> [219.672324] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:213:DP-MST A] <7> [219.672614] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:214:DP-MST B] <7> [219.672852] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:215:DP-MST C] <7> [219.673034] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [219.673295] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [219.673479] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TBT PLL <7> [219.673692] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 1 <7> [219.673965] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 2 <7> [219.674288] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 3 <7> [219.674524] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 4 <7> [219.674722] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7> [219.674983] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7> [219.675220] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:80:pipe A] <7> [219.675388] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 <7> [219.675621] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 turn panel power on <7> [219.675825] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [220.146992] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [220.147672] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [220.148287] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 wait for panel power on <7> [220.148943] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7> [220.210570] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7> [220.211246] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:184:DDI A/PHY A] - long <7> [220.211819] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [220.212442] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:184:DDI A/PHY A] <7> [220.359736] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [220.360458] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A <7> [220.361407] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 turning VDD on <7> [220.362144] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7> [220.364931] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 44 41 00 00 01 c0 02 00 02 00 00 0b 80 <7> [220.364979] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Reloading eDP link rates <7> [220.365665] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 06 <7> [220.366466] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [220.366653] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [220.367793] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Clock recovery OK <7> [220.368157] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7> [220.370272] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [220.370618] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [220.371443] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [220.372137] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [220.372485] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [220.372849] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:185:eDP-1] Performing OUI wait (0 ms) <7> [220.373854] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:185:eDP-1] set backlight PWM = 96000 <7> [220.389099] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7> [220.389895] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2 <7> [220.391889] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:185:eDP-1] <7> [220.392792] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7> [220.394417] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [220.395453] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1] <6> [220.396813] [IGT] kms_pm_rpm: finished subtest basic-pci-d3-state, SUCCESS <7> [220.397055] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [220.397989] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7> [220.398335] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [220.398675] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [220.398997] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000 <7> [220.399337] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [220.399353] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [220.399361] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor <7> [220.399369] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0 <7> [220.399397] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no <7> [220.399710] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [220.400713] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [220.401035] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [220.401909] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1] <7> [220.402283] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:203:DP-1] <7> [220.402715] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:212:DP-2] <7> [220.410537] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [220.411154] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [220.423807] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [220.459912] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:221] from all active usage due to RMFB ioctl <7> [220.460012] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:31:plane 1A] because [FB:221] is removed <7> [220.460148] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 4027) -> ( 0 - 0), size 4027 -> 0 <7> [220.460836] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [220.461444] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [220.462051] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [220.462664] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [220.463219] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 0 num active planes 0 <7> [220.463876] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10928 required 0 <7> [220.464445] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15758 required 0 <7> [220.465037] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 16388 required 0 <7> [220.465554] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 17250 required 0 <7> [220.466061] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 0 <7> [220.466503] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 40533 required 0 <7> [220.466950] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 0 <7> [220.467422] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2 <7> [220.493101] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4027), size 0 -> 4027 <7> [220.493773] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,*stwm <7> [220.494331] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0 <7> [220.494897] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201 <7> [220.495431] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207 <7> [220.495981] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 2154400 num active planes 1 <7> [220.496523] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10928 required 2263 <7> [220.497134] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15758 required 2263 <7> [220.497593] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 16388 required 2263 <7> [220.498045] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 17250 required 2263 <7> [220.498473] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 2263 <7> [220.498898] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 40533 required 2263 <7> [220.499291] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 2263 <7> [220.508110] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2 <6> [220.514391] [IGT] kms_pm_rpm: exiting, ret=0 <6> [220.525598] Console: switching to colour frame buffer device 480x135

<7> [214.335022] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]

<7> [214.335036] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]

<7> [214.335275] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected

<7> [214.335735] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1]

<7> [214.335743] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:203:DP-1]

<7> [214.335980] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1] disconnected

<7> [214.336748] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2]

<7> [214.336759] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:212:DP-2]

<7> [214.337097] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2] disconnected

<7> [214.337876] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1]

<7> [214.337886] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1]

<7> [214.338963] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [214.339789] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes

<7> [214.340061] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [214.340317] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [214.340568] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000

<7> [214.340878] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [214.340893] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [214.340902] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor

<7> [214.340909] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0

<7> [214.340945] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no

<7> [214.341220] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [214.342365] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [214.342733] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [214.343957] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1] probed modes :

<7> [214.343974] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa

<7> [214.343986] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa

<7> [214.344054] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]

<7> [214.344068] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]

<7> [214.344501] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected

<7> [214.344549] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1]

<7> [214.344558] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:203:DP-1]

<7> [214.345020] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1] disconnected

<7> [214.345065] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2]

<7> [214.345075] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:212:DP-2]

<7> [214.345513] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2] disconnected

<7> [214.345591] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1]

<7> [214.345601] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1]

<7> [214.346859] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [214.347869] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes

<7> [214.348235] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [214.348542] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [214.348784] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000

<7> [214.348933] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [214.348942] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [214.348946] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor

<7> [214.348950] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0

<7> [214.348975] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no

<7> [214.349214] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [214.350534] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [214.350929] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [214.352204] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1] probed modes :

<7> [214.352221] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa

<7> [214.352235] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa

<7> [214.352428] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]

<7> [214.352443] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]

<7> [214.352930] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected

<7> [214.353077] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1]

<7> [214.353088] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:203:DP-1]

<7> [214.353546] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1] disconnected

<7> [214.353710] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2]

<7> [214.353720] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:212:DP-2]

<7> [214.354163] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2] disconnected

<7> [215.396967] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [215.397404] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [215.397794] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [215.398149] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [215.398485] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7843931/8388608 link 522928/524288, found tu 0, data 0/0 link 0/0)

<7> [215.399386] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [215.399794] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [215.400164] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3840, found 0)

<7> [215.400523] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 4000, found 0)

<7> [215.400897] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3840, found 0)

<7> [215.401266] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 4000, found 0)

<7> [215.401432] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3888, found 0)

<7> [215.401575] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3920, found 0)

<7> [215.401723] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 2160, found 0)

<7> [215.401866] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 2160, found 0)

<7> [215.401999] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 2163, found 0)

<7> [215.402124] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 2168, found 0)

<7> [215.402250] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 2244, found 0)

<7> [215.402376] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 2244, found 0)

<7> [215.402501] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3840, found 0)

<7> [215.402626] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 4000, found 0)

<7> [215.402760] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3840, found 0)

<7> [215.402903] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 4000, found 0)

<7> [215.403036] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3888, found 0)

<7> [215.403161] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3920, found 0)

<7> [215.403286] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 2160, found 0)

<7> [215.403411] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 2160, found 0)

<7> [215.403536] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 2163, found 0)

<7> [215.403669] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 2168, found 0)

<7> [215.403812] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 2244, found 0)

<7> [215.403942] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 2244, found 0)

<7> [215.404067] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [215.404192] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [215.404317] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [215.404443] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)

<7> [215.404569] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 538600, found 0)

<7> [215.404701] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 538600, found 0)

<7> [215.404844] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [215.404975] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [215.405104] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:80:pipe A] releasing DPLL 0

<7> [215.405272] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no

<7> [215.405393] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [215.405549] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 4027) -> ( 0 - 0), size 4027 -> 0

<7> [215.405690] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb (4027 - 4096) -> ( 0 - 0), size 69 -> 0

<7> [215.405827] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [215.405962] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [215.406081] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [215.406197] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [215.406326] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 0 num active planes 0

<7> [215.406460] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10928 required 0

<7> [215.406609] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15758 required 0

<7> [215.406767] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 16388 required 0

<7> [215.406918] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 17250 required 0

<7> [215.407064] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 0

<7> [215.407192] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 40533 required 0

<7> [215.407336] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 0

<7> [215.407498] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change

<7> [215.407654] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 179200 kHz, actual 179200 kHz

<7> [215.407805] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [215.407958] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: no [modeset]

<7> [215.408102] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no

<7> [215.408244] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no

<7> [215.408386] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no

<7> [215.408532] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no

<7> [215.408706] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no

<7> [215.408886] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no

<7> [215.409159] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2

<7> [215.414288] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [215.618819] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:185:eDP-1] set backlight PWM = 0

<7> [215.620834] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [215.631170] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 turn panel power off

<7> [215.631870] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [215.632412] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060

<7> [215.686958] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [215.686946] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010

<7> [215.687655] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:184:DDI A/PHY A] - long

<7> [215.687824] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A

<7> [215.688272] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [215.688583] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:80:pipe A]

<7> [215.688990] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:184:DDI A/PHY A]

<7> [215.689378] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0

<7> [215.690073] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A

<7> [215.690797] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 179200 kHz, VCO 537600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [215.691610] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] aud_ts_cdclk set to M=60, N=448

<7> [215.692199] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:184:DDI A/PHY A]

<7> [215.692802] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:193:DDI B/PHY B]

<7> [215.693266] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:202:DDI TC1/PHY TC1]

<7> [215.693736] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:204:DP-MST A]

<7> [215.694155] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:205:DP-MST B]

<7> [215.694559] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:206:DP-MST C]

<7> [215.694957] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:211:DDI TC2/PHY TC2]

<7> [215.695342] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:213:DP-MST A]

<7> [215.695727] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:214:DP-MST B]

<7> [215.696100] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:215:DP-MST C]

<7> [215.696481] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:185:eDP-1]

<7> [215.697002] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [215.697469] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [215.697886] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TBT PLL

<7> [215.698287] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 1

<7> [215.698693] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 2

<7> [215.699086] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 3

<7> [215.699492] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 4

<7> [215.699976] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf

<7> [215.700457] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [215.701013] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_A

<7> [215.701490] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A]

<7> [215.721050] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [215.721834] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [215.722438] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [215.723414] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.725467] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [215.728297] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [215.729488] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [215.730419] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [215.731239] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [215.731843] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [215.732225] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [215.732697] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [215.806476] [IGT] kms_pm_rpm: starting subtest basic-pci-d3-state

<7> [215.829738] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [215.830014] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [215.830396] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [215.830809] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [215.831248] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [215.831699] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [215.832107] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [215.833184] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [215.833560] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [215.834074] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [215.836909] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [215.837168] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [215.841988] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [215.842594] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [215.842839] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.843035] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [215.843567] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [215.844771] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1]

<7> [215.845002] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A

<7> [215.845397] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 turning VDD on

<7> [215.845559] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [216.291110] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [216.291532] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [216.292047] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [216.292383] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [216.354163] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010

<7> [216.354859] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:184:DDI A/PHY A] - long

<7> [216.355435] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [216.356111] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:184:DDI A/PHY A]

<7> [216.501142] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [216.502853] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes

<7> [216.503246] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [216.503579] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [216.503936] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000

<7> [216.504347] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [216.504360] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [216.504364] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor

<7> [216.504369] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0

<7> [216.504406] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no

<7> [216.504540] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [216.505448] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [216.505579] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [216.506334] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]

<7> [216.506861] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:203:DP-1]

<7> [216.507208] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:212:DP-2]

<4> [218.388169] ======================================================

<4> [218.388173] WARNING: possible circular locking dependency detected

<4> [218.388176] 6.8.0-rc7-linus-v6.8-rc7-g90d35da658da+ #1 Not tainted

<4> [218.388180] ------------------------------------------------------

<4> [218.388185] ffff8881102a9978 (&gt->reset.backoff_srcu){++++}-{0:0}, at: _intel_gt_reset_lock+0x35/0x380 [i915]

<4> [218.388535] ffffc900003abe58 ((work_completion)(&(&guc->timestamp.work)->work)){+.+.}-{0:0}, at: process_scheduled_works+0x264/0x530

-> #3 ((work_completion)(&(&guc->timestamp.work)->work)){+.+.}-{0:0}:

<4> [218.388577] intel_guc_submission_reset_prepare+0x81/0x4b0 [i915]

&gt->reset.backoff_srcu --> &gt->reset.mutex --> (work_completion)(&(&guc->timestamp.work)->work)

<4> [218.392749] lock((work_completion)(&(&guc->timestamp.work)->work));

<4> [218.392752] lock((work_completion)(&(&guc->timestamp.work)->work));

<4> [218.392757] #0: ffff888100079538 ((wq_completion)events_highpri){+.+.}-{0:0}, at: process_scheduled_works+0x264/0x530

<4> [218.392761] #1: ffffc900003abe58 ((work_completion)(&(&guc->timestamp.work)->work)){+.+.}-{0:0}, at: process_scheduled_works+0x264/0x530

<4> [218.392766] CPU: 1 PID: 92 Comm: kworker/1:1H Not tainted 6.8.0-rc7-linus-v6.8-rc7-g90d35da658da+ #1

<4> [218.392768] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-N LP5 RVP, BIOS ADLNFWI1.R00.3362.A00.2208311605 08/31/2022

<4> [218.392770] Workqueue: events_highpri guc_timestamp_ping [i915]

<4> [218.393014] ? track_intel_runtime_pm_wakeref.part.0+0x30/0x60 [i915]

<7> [219.538939] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 turning VDD off

<7> [219.539498] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [219.539863] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A

<7> [219.540269] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [219.540668] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [219.541054] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [219.541772] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.541811] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010

<7> [219.542150] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [219.542220] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:184:DDI A/PHY A] - long

<7> [219.542583] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [219.542979] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:184:DDI A/PHY A]

<7> [219.543158] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [219.544200] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [219.544844] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [219.545094] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [219.545299] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [219.545425] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [219.545575] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [219.618254] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:185:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [219.619070] i915 0000:00:02.0: [drm:intel_dp_compute_config_link_bpp_limits [i915]] [ENCODER:184:DDI A/PHY A][CRTC:80:pipe A] DP link limits: pixel clock 538600 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000

<7> [219.619692] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30

<7> [219.620248] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 2019750 available 2160000

<7> [219.620816] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [219.621443] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:184:DDI A/PHY A] [CRTC:80:pipe A]

<7> [219.621951] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [219.622504] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [219.622929] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [219.623108] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [219.623262] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [219.623396] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [219.623559] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3840)

<7> [219.623712] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 4000)

<7> [219.623877] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3840)

<7> [219.624031] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 4000)

<7> [219.624174] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3888)

<7> [219.624322] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3920)

<7> [219.624497] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 2160)

<7> [219.624684] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 2160)

<7> [219.624858] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 2163)

<7> [219.625020] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 2168)

<7> [219.625158] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 2244)

<7> [219.625282] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 2244)

<7> [219.625405] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3840)

<7> [219.625543] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 4000)

<7> [219.625903] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3840)

<7> [219.626071] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 4000)

<7> [219.626219] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3888)

<7> [219.626366] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3920)

<7> [219.626509] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 2160)

<7> [219.626655] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 2160)

<7> [219.626811] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 2163)

<7> [219.626958] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 2168)

<7> [219.627125] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 2244)

<7> [219.627301] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 2244)

<7> [219.627489] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [219.627667] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [219.627839] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [219.627991] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)

<7> [219.628140] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [219.628323] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [219.628551] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [219.628870] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [219.629063] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4027), size 0 -> 4027

<7> [219.629210] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb ( 0 - 0) -> (4027 - 4096), size 0 -> 69

<7> [219.629372] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [219.629540] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0

<7> [219.629714] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201

<7> [219.629884] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207

<7> [219.630045] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 2154400 num active planes 1

<7> [219.630209] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10928 required 2263

<7> [219.630354] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15758 required 2263

<7> [219.630496] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 16388 required 2263

<7> [219.630643] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 17250 required 2263

<7> [219.630815] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 2263

<7> [219.630968] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 40533 required 2263

<7> [219.631117] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 2263

<7> [219.631312] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (269300 kHz) > [CRTC:80:pipe A] min cdclk (0 kHz)

<7> [219.631491] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (42079 kHz) > old min cdclk (0 kHz)

<7> [219.631685] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change

<7> [219.632040] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 307200 kHz, actual 307200 kHz

<7> [219.632346] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [219.632708] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:80:pipe A] allocated DPLL 0

<7> [219.632875] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:80:pipe A] reserving DPLL 0

<7> [219.633025] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [modeset]

<7> [219.633171] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [219.633314] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0

<7> [219.633467] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [219.633628] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [219.633806] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0

<7> [219.633979] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [219.634144] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7843931, data_n: 8388608, link_m: 522928, link_n: 524288, tu: 64

<7> [219.634289] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [219.634433] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: disabled

<7> [219.634573] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [219.634744] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, psr2: enabled, panel replay: disabled, selective fetch: enabled

<7> [219.634922] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0

<7> [219.635082] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [219.635239] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0

<7> [219.635249] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0

<7> [219.635394] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa

<7> [219.635536] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa

<7> [219.635681] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=538600, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2160 vb=2160-2244 vs=2163-2168 vt=2244, flags=0xa

<7> [219.635851] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa

<7> [219.636026] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=538600, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2160 vb=2160-2244 vs=2163-2168 vt=2244, flags=0xa

<7> [219.636201] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3840x2160+0+0, pixel rate 538600

<7> [219.636366] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 60, ips linetime: 0

<7> [219.636511] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [219.636657] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [219.636820] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [219.636989] i915 0000:00:02.0: [drm:icl_dump_hw_state [i915]] dpll_hw_state: cfgcr0: 0xe001a5, cfgcr1: 0x48, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [219.637172] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [219.637351] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [219.637526] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [219.637697] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [219.637868] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [219.638011] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [219.638150] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [219.638289] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [219.638427] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [219.638571] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [219.638719] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [219.638894] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [219.639064] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:221] 3840x2160 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [219.639233] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [219.639394] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3840.000000x2160.000000+0.000000+0.000000 dst: 3840x2160+0+0

<7> [219.639551] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no

<7> [219.639700] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no

<7> [219.639871] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no

<7> [219.640013] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no

<7> [219.640153] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no

<7> [219.650936] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [219.651156] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [219.651485] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [219.651835] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [219.652418] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [219.653136] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [219.653721] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [219.654150] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [219.654472] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [219.654921] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [219.659761] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [219.660074] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [219.663441] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [219.664078] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [219.665666] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.668672] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [219.669159] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [219.669799] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A

<7> [219.670106] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [219.670460] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] aud_ts_cdclk set to M=60, N=768

<7> [219.670716] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:184:DDI A/PHY A]

<7> [219.670964] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:193:DDI B/PHY B]

<7> [219.671176] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:202:DDI TC1/PHY TC1]

<7> [219.671363] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:204:DP-MST A]

<7> [219.671572] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:205:DP-MST B]

<7> [219.671802] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:206:DP-MST C]

<7> [219.672042] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:211:DDI TC2/PHY TC2]

<7> [219.672324] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:213:DP-MST A]

<7> [219.672614] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:214:DP-MST B]

<7> [219.672852] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:215:DP-MST C]

<7> [219.673034] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [219.673295] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [219.673479] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TBT PLL

<7> [219.673692] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 1

<7> [219.673965] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 2

<7> [219.674288] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 3

<7> [219.674524] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 4

<7> [219.674722] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf

<7> [219.674983] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A

<7> [219.675220] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:80:pipe A]

<7> [219.675388] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0

<7> [219.675621] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 turn panel power on

<7> [219.675825] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [220.146992] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [220.147672] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [220.148287] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 wait for panel power on

<7> [220.148943] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063

<7> [220.210570] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010

<7> [220.211246] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:184:DDI A/PHY A] - long

<7> [220.211819] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [220.212442] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:184:DDI A/PHY A]

<7> [220.359736] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [220.360458] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A

<7> [220.361407] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 turning VDD on

<7> [220.362144] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b

<7> [220.364931] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 44 41 00 00 01 c0 02 00 02 00 00 0b 80

<7> [220.364979] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Reloading eDP link rates

<7> [220.365665] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 06

<7> [220.366466] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [220.366653] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [220.367793] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Clock recovery OK

<7> [220.368157] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Using DP training pattern TPS3

<7> [220.370272] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [220.370618] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [220.371443] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [220.372137] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [220.372485] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [220.372849] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:185:eDP-1] Performing OUI wait (0 ms)

<7> [220.373854] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:185:eDP-1] set backlight PWM = 96000

<7> [220.389099] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf

<7> [220.389895] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2

<7> [220.391889] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:185:eDP-1]

<7> [220.392792] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A]

<7> [220.394417] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [220.395453] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1]

<6> [220.396813] [IGT] kms_pm_rpm: finished subtest basic-pci-d3-state, SUCCESS

<7> [220.397055] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [220.397989] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes

<7> [220.398335] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [220.398675] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [220.398997] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000

<7> [220.399337] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [220.399353] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [220.399361] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor

<7> [220.399369] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0

<7> [220.399397] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no

<7> [220.399710] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [220.400713] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [220.401035] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [220.401909] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]

<7> [220.402283] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:203:DP-1]

<7> [220.402715] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:212:DP-2]

<7> [220.410537] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [220.411154] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [220.423807] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [220.459912] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:221] from all active usage due to RMFB ioctl

<7> [220.460012] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:31:plane 1A] because [FB:221] is removed

<7> [220.460148] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 4027) -> ( 0 - 0), size 4027 -> 0

<7> [220.460836] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [220.461444] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [220.462051] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [220.462664] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [220.463219] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 0 num active planes 0

<7> [220.463876] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10928 required 0

<7> [220.464445] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15758 required 0

<7> [220.465037] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 16388 required 0

<7> [220.465554] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 17250 required 0

<7> [220.466061] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 0

<7> [220.466503] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 40533 required 0

<7> [220.466950] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 0

<7> [220.467422] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2

<7> [220.493101] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4027), size 0 -> 4027

<7> [220.493773] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [220.494331] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0

<7> [220.494897] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201

<7> [220.495431] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207

<7> [220.495981] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 2154400 num active planes 1

<7> [220.496523] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10928 required 2263

<7> [220.497134] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15758 required 2263

<7> [220.497593] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 16388 required 2263

<7> [220.498045] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 17250 required 2263

<7> [220.498473] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 2263

<7> [220.498898] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 40533 required 2263

<7> [220.499291] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 2263

<7> [220.508110] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2

<6> [220.525598] Console: switching to colour frame buffer device 480x135

Results for igt@kms_pm_rpm@basic-pci-d3-state