Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 1.28-g40ed74461 (x86_64) (Linux: 6.8.0-rc7-linus-v6.8-rc7-g90d35da658da+ x86_64)
Out 
Using IGT_SRANDOM=1709500557 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.027s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.027s)
Dmesg
<6> [167.011146] Console: switching to colour dummy device 80x25
<6> [167.011355] [IGT] kms_force_connector_basic: executing
<7> [167.013824] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [167.014764] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [167.023833] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [167.024690] [drm:status_store] [CONNECTOR:194:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [167.024700] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [167.024707] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [167.025123] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected
<7> [167.025215] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [167.025228] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [167.025747] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected
<7> [167.025877] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [167.025890] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [167.026333] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected
<6> [167.026729] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [167.026987] [drm:status_store] [CONNECTOR:194:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [167.027002] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [167.027014] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [167.028054] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [167.028353] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [167.028983] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [167.029372] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [167.029399] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [167.029746] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [167.035304] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [167.035313] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [167.035440] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] status updated from disconnected to connected
<7> [167.035610] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] probed modes :
<7> [167.035615] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [167.035621] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [167.035626] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [167.035639] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [167.035644] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [167.035708] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [167.035715] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [167.036221] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [167.036454] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [167.036974] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [167.037218] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [167.037232] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [167.037444] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [167.042738] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [167.042752] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [167.042922] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] probed modes :
<7> [167.042926] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [167.042930] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [167.042934] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [167.042937] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [167.042940] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [167.043119] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:194:HDMI-A-1] EDID override set
<7> [167.043139] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [167.043143] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [167.043271] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:194:HDMI-A-1] ELD monitor IGT
<7> [167.043275] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:194:HDMI-A-1] ELD size 24, SAD count 0
<7> [167.043511] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [167.043617] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [167.043958] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [167.044093] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [167.044273] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [167.044284] [drm:drm_mode_prune_invalid] Not using 800x600 mode: STALE
<7> [167.044296] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [167.044305] [drm:drm_mode_prune_invalid] Not using 848x480 mode: STALE
<7> [167.044316] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] probed modes :
<7> [167.044323] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [167.044331] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [167.044339] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [167.044346] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [167.044353] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [167.044361] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [167.044616] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:194:HDMI-A-1] EDID override set
<7> [167.044690] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [167.044700] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [167.045011] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:194:HDMI-A-1] ELD monitor IGT
<7> [167.045020] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:194:HDMI-A-1] ELD size 24, SAD count 0
<7> [167.045029] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:194:HDMI-A-1] EDID changed, epoch counter 4
<7> [167.045314] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [167.045437] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [167.045848] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [167.046125] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [167.046303] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [167.046314] [drm:drm_mode_prune_invalid] Not using 1400x1050 mode: STALE
<7> [167.046327] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] probed modes :
<7> [167.046334] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [167.046342] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [167.046349] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [167.046357] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [167.046364] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [167.046581] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:194:HDMI-A-1] EDID override reset
<7> [167.046624] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [167.046651] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [167.047173] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [167.047312] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [167.047680] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [167.047926] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [167.047941] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [167.048165] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [167.052884] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [167.052891] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [167.053007] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:194:HDMI-A-1] EDID changed, epoch counter 5
<7> [167.053064] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [167.053068] [drm:drm_mode_prune_invalid] Not using 1920x1080 mode: STALE
<7> [167.053074] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [167.053078] [drm:drm_mode_prune_invalid] Not using 1280x720 mode: STALE
<7> [167.053083] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] probed modes :
<7> [167.053086] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [167.053090] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [167.053093] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [167.053096] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [167.053099] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [167.053230] [drm:status_store] [CONNECTOR:194:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [167.053235] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [167.053240] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [167.053401] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] status updated from connected to disconnected
<7> [167.053414] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected
<7> [167.053565] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [167.053570] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [167.053789] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected
<6> [167.054122] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [167.054290] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [167.055261] [drm:status_store] [CONNECTOR:185:eDP-1] force updated from 0 to 0 or reprobing
<7> [167.055270] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1]
<7> [167.055277] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1]
<7> [167.056341] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [167.057106] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [167.057295] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [167.057442] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [167.057580] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [167.057797] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [167.057808] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [167.057813] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor
<7> [167.057819] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0
<7> [167.057840] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no
<7> [167.058001] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [167.058863] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [167.059015] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [167.059796] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1] probed modes :
<7> [167.059803] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [167.059810] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [167.059862] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1]
<7> [167.059869] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1]
<7> [167.060683] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [167.061328] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [167.061463] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [167.061593] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [167.061781] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [167.061940] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [167.061946] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [167.061950] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor
<7> [167.061954] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0
<7> [167.061969] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no
<7> [167.062101] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [167.062944] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [167.063083] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [167.063822] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1] probed modes :
<7> [167.063829] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [167.063835] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [167.063966] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:185:eDP-1] EDID override reset
<7> [167.063987] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1]
<7> [167.063993] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1]
<7> [167.064851] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [167.065490] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [167.065622] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [167.065763] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [167.065893] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [167.066034] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [167.066039] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [167.066044] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor
<7> [167.066047] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0
<7> [167.066061] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no
<7> [167.066188] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [167.066988] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [167.067116] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [167.067827] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1] probed modes :
<7> [167.067831] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [167.067836] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [167.068005] [drm:status_store] [CONNECTOR:194:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [167.068012] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [167.068017] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [167.068209] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected
<7> [167.068242] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [167.068247] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [167.068421] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected
<7> [167.068507] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:194:HDMI-A-1] EDID override reset
<7> [167.068524] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [167.068528] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [167.068711] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected
<7> [167.068810] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:203:DP-1] EDID override reset
<7> [167.068826] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1]
<7> [167.068830] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:203:DP-1]
<7> [167.069032] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1] disconnected
<7> [167.069123] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:212:DP-2] EDID override reset
<7> [167.069138] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2]
<7> [167.069142] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:212:DP-2]
<7> [167.069330] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2] disconnected
<6> [167.069876] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [167.070005] [drm:status_store] [CONNECTOR:194:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [167.070010] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [167.070016] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [167.070206] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected
<7> [167.070246] [drm:status_store] [CONNECTOR:185:eDP-1] force updated from 0 to 0 or reprobing
<7> [167.070250] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1]
<7> [167.070254] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1]
<7> [167.071103] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [167.071753] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [167.071879] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [167.072005] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [167.072128] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [167.072267] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [167.072273] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [167.072277] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor
<7> [167.072281] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0
<7> [167.072297] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no
<7> [167.072420] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [167.073265] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [167.073391] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [167.074116] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1] probed modes :
<7> [167.074121] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [167.074127] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [167.074337] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [167.094385] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0]
<7> [167.094392] [drm:drm_client_modeset_probe]
<7> [167.094421] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1]
<7> [167.094427] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1]
<7> [167.095541] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [167.096740] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [167.097070] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [167.097272] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [167.097388] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [167.097515] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [167.097522] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [167.097526] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor
<7> [167.097530] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0
<7> [167.097546] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no
<7> [167.097668] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [167.098740] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [167.099043] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [167.100292] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1] probed modes :
<7> [167.100305] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [167.100317] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [167.100329] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [167.100342] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [167.100750] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected
<7> [167.100764] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1]
<7> [167.100775] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:203:DP-1]
<7> [167.101198] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1] disconnected
<7> [167.101210] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2]
<7> [167.101221] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:212:DP-2]
<7> [167.101673] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2] disconnected
<7> [167.101685] [drm:drm_client_modeset_probe] connector 185 enabled? yes
<7> [167.101694] [drm:drm_client_modeset_probe] connector 194 enabled? no
<7> [167.101701] [drm:drm_client_modeset_probe] connector 203 enabled? no
<7> [167.101707] [drm:drm_client_modeset_probe] connector 212 enabled? no
<7> [167.101768] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [167.101789] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 185
<7> [167.101797] [drm:drm_client_modeset_probe] looking for preferred mode on connector 185 0
<7> [167.101803] [drm:drm_client_modeset_probe] found mode 3840x2160
<7> [167.101809] [drm:drm_client_modeset_probe] picking CRTCs for 3840x2160 config
<7> [167.101841] [drm:drm_client_modeset_probe] desired mode 3840x2160 set on crtc 80 (0,0)
<6> [167.128165] Console: switching to colour frame buffer device 480x135
Created at 2024-03-03 22:45:27