<5>[ 0.000000] Linux version 6.8.0-rc6-linus-v6.8-rc6-gd206a76d7d27+ (kbuild@gfx-ci) (gcc (Ubuntu 9.4.0-1ubuntu1~20.04.2) 9.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1 SMP PREEMPT_DYNAMIC Sun Feb 25 23:49:10 UTC 2024 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes console=tty1 console=ttyS0,115200 iommu=pt nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 drm.debug=0xe log_buf_len=1M trace_clock=global 3 ro <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000060a3efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000060a3f000-0x0000000063db6fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000063db7000-0x0000000063edbfff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x0000000063edc000-0x0000000063ffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x0000000063fff000-0x0000000063ffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000064000000-0x00000000787fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000000ffffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087fffffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] APIC: Static calls initialized <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x63ffe000 ACPI 2.0=0x63ffe014 TPMFinalLog=0x63e11000 SMBIOS=0x60b16000 MEMATTR=0x5bdbb018 ESRT=0x5ae00c18 TPMEventLog=0x5bca6018 <6>[ 0.000000] efi: Remove mem287: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem289: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.6 present. <6>[ 0.000000] DMI: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3471.D91.2401310918 01/31/2024 <6>[ 0.000000] tsc: Detected 3400.000 MHz processor <6>[ 0.000000] tsc: Detected 3379.200 MHz TSC <7>[ 0.000011] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000014] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000018] last_pfn = 0x880000 max_arch_pfn = 0x400000000 <6>[ 0.000022] MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs <6>[ 0.000024] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <6>[ 0.000383] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000384] last_pfn = 0x64000 max_arch_pfn = 0x400000000 <6>[ 0.000390] esrt: Reserving ESRT space from 0x000000005ae00c18 to 0x000000005ae00d40. <7>[ 0.000397] e820: update [mem 0x5ae00000-0x5ae00fff] usable ==> reserved <6>[ 0.000425] Using GB pages for direct mapping <6>[ 0.001225] printk: log_buf_len: 1048576 bytes <6>[ 0.001229] printk: early log buf free: 259168(98%) <6>[ 0.001231] Secure boot disabled <6>[ 0.001233] ACPI: Early table checksum verification disabled <6>[ 0.001239] ACPI: RSDP 0x0000000063FFE014 000024 (v02 INTEL ) <6>[ 0.001249] ACPI: XSDT 0x0000000063F15228 000184 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001255] ACPI: FACP 0x0000000063FDC000 000114 (v06 INTEL MTL 00000002 01000013) <6>[ 0.001259] ACPI: DSDT 0x0000000063F55000 083F8A (v02 INTEL MTL 00000002 01000013) <6>[ 0.001263] ACPI: FACS 0x0000000063DF7000 000040 <6>[ 0.001266] ACPI: SSDT 0x0000000063FFC000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.001269] ACPI: SSDT 0x0000000063FFB000 00070D (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.001272] ACPI: SSDT 0x0000000063FFA000 0005E4 (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.001276] ACPI: SSDT 0x0000000063FF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.001279] ACPI: SSDT 0x0000000063FF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930) <6>[ 0.001282] ACPI: SSDT 0x0000000063FF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.001285] ACPI: SSDT 0x0000000063FF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.001288] ACPI: SSDT 0x0000000063FF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.001292] ACPI: SSDT 0x0000000063FF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930) <6>[ 0.001295] ACPI: SSDT 0x0000000063FED000 003BC8 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.001298] ACPI: DTPR 0x0000000063FEC000 000098 (v01 00000000 00000000) <6>[ 0.001301] ACPI: SSDT 0x0000000063FEB000 000D03 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.001304] ACPI: SSDT 0x0000000063FE8000 002494 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.001308] ACPI: SSDT 0x0000000063FDE000 009AB7 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.001310] ACPI: SSDT 0x0000000063FDD000 0000F9 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.001313] ACPI: HPET 0x0000000063FDB000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001317] ACPI: APIC 0x0000000063FDA000 000358 (v05 INTEL MTL 00000002 01000013) <6>[ 0.001320] ACPI: MCFG 0x0000000063FD9000 00003C (v01 INTEL MTL 00000002 01000013) <6>[ 0.001323] ACPI: SSDT 0x0000000063F45000 00FCEF (v02 INTEL MtlP_Rvp 00001000 INTL 20210930) <6>[ 0.001326] ACPI: SSDT 0x0000000063F43000 00147F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.001329] ACPI: SSDT 0x0000000063F3E000 00389C (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.001332] ACPI: SSDT 0x0000000063F38000 00535A (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.001334] ACPI: SSDT 0x0000000063FFD000 00060E (v02 INTEL Tpm2Tabl 00001000 INTL 20210930) <6>[ 0.001336] ACPI: TPM2 0x0000000063F37000 00004C (v04 INTEL MTL 00000002 01000013) <6>[ 0.001339] ACPI: LPIT 0x0000000063F36000 0000CC (v01 INTEL MTL 00000002 01000013) <6>[ 0.001341] ACPI: WSMT 0x0000000063F35000 000028 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001343] ACPI: SSDT 0x0000000063F34000 000CA6 (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.001345] ACPI: SSDT 0x0000000063F2E000 00587D (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.001347] ACPI: DBGP 0x0000000063F2D000 000034 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001349] ACPI: DBG2 0x0000000063F2C000 000054 (v00 INTEL MTL 00000002 01000013) <6>[ 0.001351] ACPI: NHLT 0x0000000063F2B000 00098B (v00 INTEL MTL 00000002 01000013) <6>[ 0.001354] ACPI: SSDT 0x0000000063F29000 001191 (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.001356] ACPI: SSDT 0x0000000063F23000 005CAE (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.001358] ACPI: ECDT 0x0000000063F22000 000069 (v01 MTL 00000002 01000013) <6>[ 0.001360] ACPI: DMAR 0x0000000063F21000 0000A8 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001362] ACPI: FPDT 0x0000000063F20000 000044 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001364] ACPI: SSDT 0x0000000063F1E000 001015 (v02 INTEL xh_mtlp3 00000000 INTL 20210930) <6>[ 0.001366] ACPI: SSDT 0x0000000063F1B000 00281A (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.001368] ACPI: SSDT 0x0000000063F18000 0028D3 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.001370] ACPI: SSDT 0x0000000063F16000 0011A0 (v02 INTEL St00Ssdt 00001000 INTL 20210930) <6>[ 0.001372] ACPI: ASF! 0x0000000063F42000 000074 (v32 INTEL MTL 00000002 01000013) <6>[ 0.001374] ACPI: PHAT 0x0000000063F14000 000810 (v01 INTEL MTL 00000005 MSFT 0100000D) <6>[ 0.001376] ACPI: BGRT 0x0000000063F13000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001377] ACPI: Reserving FACP table memory at [mem 0x63fdc000-0x63fdc113] <6>[ 0.001379] ACPI: Reserving DSDT table memory at [mem 0x63f55000-0x63fd8f89] <6>[ 0.001380] ACPI: Reserving FACS table memory at [mem 0x63df7000-0x63df703f] <6>[ 0.001380] ACPI: Reserving SSDT table memory at [mem 0x63ffc000-0x63ffc38b] <6>[ 0.001381] ACPI: Reserving SSDT table memory at [mem 0x63ffb000-0x63ffb70c] <6>[ 0.001381] ACPI: Reserving SSDT table memory at [mem 0x63ffa000-0x63ffa5e3] <6>[ 0.001382] ACPI: Reserving SSDT table memory at [mem 0x63ff9000-0x63ff91aa] <6>[ 0.001382] ACPI: Reserving SSDT table memory at [mem 0x63ff8000-0x63ff8393] <6>[ 0.001383] ACPI: Reserving SSDT table memory at [mem 0x63ff6000-0x63ff7bae] <6>[ 0.001384] ACPI: Reserving SSDT table memory at [mem 0x63ff4000-0x63ff561f] <6>[ 0.001384] ACPI: Reserving SSDT table memory at [mem 0x63ff2000-0x63ff3348] <6>[ 0.001385] ACPI: Reserving SSDT table memory at [mem 0x63ff1000-0x63ff1fba] <6>[ 0.001385] ACPI: Reserving SSDT table memory at [mem 0x63fed000-0x63ff0bc7] <6>[ 0.001386] ACPI: Reserving DTPR table memory at [mem 0x63fec000-0x63fec097] <6>[ 0.001386] ACPI: Reserving SSDT table memory at [mem 0x63feb000-0x63febd02] <6>[ 0.001387] ACPI: Reserving SSDT table memory at [mem 0x63fe8000-0x63fea493] <6>[ 0.001387] ACPI: Reserving SSDT table memory at [mem 0x63fde000-0x63fe7ab6] <6>[ 0.001388] ACPI: Reserving SSDT table memory at [mem 0x63fdd000-0x63fdd0f8] <6>[ 0.001389] ACPI: Reserving HPET table memory at [mem 0x63fdb000-0x63fdb037] <6>[ 0.001389] ACPI: Reserving APIC table memory at [mem 0x63fda000-0x63fda357] <6>[ 0.001390] ACPI: Reserving MCFG table memory at [mem 0x63fd9000-0x63fd903b] <6>[ 0.001391] ACPI: Reserving SSDT table memory at [mem 0x63f45000-0x63f54cee] <6>[ 0.001391] ACPI: Reserving SSDT table memory at [mem 0x63f43000-0x63f4447e] <6>[ 0.001392] ACPI: Reserving SSDT table memory at [mem 0x63f3e000-0x63f4189b] <6>[ 0.001392] ACPI: Reserving SSDT table memory at [mem 0x63f38000-0x63f3d359] <6>[ 0.001393] ACPI: Reserving SSDT table memory at [mem 0x63ffd000-0x63ffd60d] <6>[ 0.001393] ACPI: Reserving TPM2 table memory at [mem 0x63f37000-0x63f3704b] <6>[ 0.001394] ACPI: Reserving LPIT table memory at [mem 0x63f36000-0x63f360cb] <6>[ 0.001395] ACPI: Reserving WSMT table memory at [mem 0x63f35000-0x63f35027] <6>[ 0.001395] ACPI: Reserving SSDT table memory at [mem 0x63f34000-0x63f34ca5] <6>[ 0.001396] ACPI: Reserving SSDT table memory at [mem 0x63f2e000-0x63f3387c] <6>[ 0.001396] ACPI: Reserving DBGP table memory at [mem 0x63f2d000-0x63f2d033] <6>[ 0.001397] ACPI: Reserving DBG2 table memory at [mem 0x63f2c000-0x63f2c053] <6>[ 0.001397] ACPI: Reserving NHLT table memory at [mem 0x63f2b000-0x63f2b98a] <6>[ 0.001398] ACPI: Reserving SSDT table memory at [mem 0x63f29000-0x63f2a190] <6>[ 0.001399] ACPI: Reserving SSDT table memory at [mem 0x63f23000-0x63f28cad] <6>[ 0.001399] ACPI: Reserving ECDT table memory at [mem 0x63f22000-0x63f22068] <6>[ 0.001400] ACPI: Reserving DMAR table memory at [mem 0x63f21000-0x63f210a7] <6>[ 0.001400] ACPI: Reserving FPDT table memory at [mem 0x63f20000-0x63f20043] <6>[ 0.001401] ACPI: Reserving SSDT table memory at [mem 0x63f1e000-0x63f1f014] <6>[ 0.001402] ACPI: Reserving SSDT table memory at [mem 0x63f1b000-0x63f1d819] <6>[ 0.001402] ACPI: Reserving SSDT table memory at [mem 0x63f18000-0x63f1a8d2] <6>[ 0.001403] ACPI: Reserving SSDT table memory at [mem 0x63f16000-0x63f1719f] <6>[ 0.001403] ACPI: Reserving ASF! table memory at [mem 0x63f42000-0x63f42073] <6>[ 0.001404] ACPI: Reserving PHAT table memory at [mem 0x63f14000-0x63f1480f] <6>[ 0.001404] ACPI: Reserving BGRT table memory at [mem 0x63f13000-0x63f13037] <6>[ 0.001473] APIC: Switched APIC routing to: cluster x2apic <6>[ 0.046063] Zone ranges: <6>[ 0.046065] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.046068] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.046070] Normal [mem 0x0000000100000000-0x000000087fffffff] <6>[ 0.046072] Movable zone start for each node <6>[ 0.046073] Early memory node ranges <6>[ 0.046074] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.046075] node 0: [mem 0x0000000000100000-0x0000000060a3efff] <6>[ 0.046076] node 0: [mem 0x0000000063fff000-0x0000000063ffffff] <6>[ 0.046077] node 0: [mem 0x0000000100000000-0x000000087fffffff] <6>[ 0.046080] Initmem setup node 0 [mem 0x0000000000001000-0x000000087fffffff] <6>[ 0.046086] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.046116] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.049529] On node 0, zone DMA32: 13760 pages in unavailable ranges <6>[ 0.092780] On node 0, zone Normal: 16384 pages in unavailable ranges <6>[ 0.093257] ACPI: PM-Timer IO Port: 0x1808 <6>[ 0.093263] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.093307] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.093310] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.093311] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.093314] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.093315] ACPI: HPET id: 0x8086a201 base: 0xfed00000 <7>[ 0.093325] e820: update [mem 0x5bda0000-0x5bdbafff] usable ==> reserved <6>[ 0.093333] TSC deadline timer available <6>[ 0.093334] smpboot: Allowing 22 CPUs, 0 hotplug CPUs <6>[ 0.093343] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.093344] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.093345] PM: hibernation: Registered nosave memory: [mem 0x5ae00000-0x5ae00fff] <6>[ 0.093346] PM: hibernation: Registered nosave memory: [mem 0x5bda0000-0x5bdbafff] <6>[ 0.093347] PM: hibernation: Registered nosave memory: [mem 0x60a3f000-0x63db6fff] <6>[ 0.093348] PM: hibernation: Registered nosave memory: [mem 0x63db7000-0x63edbfff] <6>[ 0.093348] PM: hibernation: Registered nosave memory: [mem 0x63edc000-0x63ffefff] <6>[ 0.093349] PM: hibernation: Registered nosave memory: [mem 0x64000000-0x787fffff] <6>[ 0.093349] PM: hibernation: Registered nosave memory: [mem 0x78800000-0xfed1ffff] <6>[ 0.093350] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff] <6>[ 0.093350] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff] <6>[ 0.093352] [mem 0x78800000-0xfed1ffff] available for PCI devices <6>[ 0.093356] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.096297] setup_percpu: NR_CPUS:64 nr_cpumask_bits:22 nr_cpu_ids:22 nr_node_ids:1 <6>[ 0.097757] percpu: Embedded 72 pages/cpu s257120 r8192 d29600 u524288 <7>[ 0.097760] pcpu-alloc: s257120 r8192 d29600 u524288 alloc=1*2097152 <7>[ 0.097762] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 <7>[ 0.097767] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 <7>[ 0.097772] pcpu-alloc: [0] 16 17 18 19 [0] 20 21 -- -- <5>[ 0.097782] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes console=tty1 console=ttyS0,115200 iommu=pt nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 drm.debug=0xe log_buf_len=1M trace_clock=global 3 ro <5>[ 0.097851] Unknown kernel command line parameters "3 BOOT_IMAGE=/boot/drm_intel", will be passed to user space. <5>[ 0.097880] random: crng init done <6>[ 0.100680] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.102090] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.102184] Built 1 zonelists, mobility grouping on. Total pages: 8130839 <6>[ 0.102186] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.102187] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.102189] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) <6>[ 0.103612] software IO TLB: area num 32. <6>[ 0.695995] Memory: 32238976K/33040248K available (16384K kernel code, 2633K rwdata, 5652K rodata, 2636K init, 20912K bss, 801016K reserved, 0K cma-reserved) <4>[ 0.696001] ********************************************************** <4>[ 0.696002] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.696002] ** ** <4>[ 0.696002] ** This system shows unhashed kernel memory addresses ** <4>[ 0.696003] ** via the console, logs, and other interfaces. This ** <4>[ 0.696003] ** might reduce the security of your system. ** <4>[ 0.696004] ** ** <4>[ 0.696004] ** If you see this message and you are not debugging ** <4>[ 0.696004] ** the kernel, report this immediately to your system ** <4>[ 0.696005] ** administrator! ** <4>[ 0.696005] ** ** <4>[ 0.696006] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.696006] ********************************************************** <6>[ 0.696159] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=22, Nodes=1 <6>[ 0.696576] Dynamic Preempt: full <6>[ 0.696917] Running RCU self tests <6>[ 0.696918] Running RCU synchronous self tests <6>[ 0.696940] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.696941] rcu: RCU lockdep checking is enabled. <6>[ 0.696942] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=22. <6>[ 0.696942] rcu: RCU callback double-/use-after-free debug is enabled. <6>[ 0.696943] Trampoline variant of Tasks RCU enabled. <6>[ 0.696944] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.696945] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=22 <6>[ 0.697021] Running RCU synchronous self tests <6>[ 0.700611] NR_IRQS: 4352, nr_irqs: 2232, preallocated irqs: 16 <6>[ 0.700980] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.701314] Console: colour dummy device 80x25 <6>[ 0.701327] printk: legacy console [tty1] enabled <6>[ 0.703200] printk: legacy console [ttyS0] enabled <4>[ 2.209698] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <4>[ 2.217377] ... MAX_LOCKDEP_SUBCLASSES: 8 <4>[ 2.221444] ... MAX_LOCK_DEPTH: 48 <4>[ 2.225595] ... MAX_LOCKDEP_KEYS: 8192 <4>[ 2.229920] ... CLASSHASH_SIZE: 4096 <4>[ 2.234248] ... MAX_LOCKDEP_ENTRIES: 32768 <4>[ 2.238658] ... MAX_LOCKDEP_CHAINS: 131072 <4>[ 2.243155] ... CHAINHASH_SIZE: 65536 <4>[ 2.247567] memory used by lock dependency info: 9397 kB <4>[ 2.252918] memory used for stack traces: 8320 kB <4>[ 2.257668] per task-struct memory footprint: 1920 bytes <6>[ 2.263039] ACPI: Core revision 20230628 <6>[ 2.268339] hpet: HPET dysfunctional in PC10. Force disabled. <6>[ 2.274031] APIC: Switch to symmetric I/O mode setup <6>[ 2.278950] DMAR: Host address width 42 <6>[ 2.282751] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 2.288039] DMAR: dmar0: reg_base_addr fc800000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0ef5e <6>[ 2.296736] DMAR: DRHD base: 0x000000fc801000 flags: 0x1 <6>[ 2.302015] DMAR: dmar1: reg_base_addr fc801000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0efde <6>[ 2.310709] DMAR: SATC flags: 0x1 <6>[ 2.314006] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc801000 IOMMU 1 <6>[ 2.320296] DMAR-IR: HPET id 0 under DRHD base 0xfc801000 <6>[ 2.325644] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 2.335855] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 2.345624] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 2.356042] Calibrating delay loop (skipped), value calculated using timer frequency.. 6758.40 BogoMIPS (lpj=3379200) <6>[ 2.357032] CPU0: Thermal monitoring enabled (TM1) <6>[ 2.357032] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 2.357032] process: using mwait in idle threads <6>[ 2.357032] CET detected: Indirect Branch Tracking enabled <6>[ 2.357032] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 2.357032] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 2.357032] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 2.357032] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 2.357032] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch <6>[ 2.357032] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 2.357032] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 2.357032] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 2.357032] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 2.357032] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 2.357032] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 2.357032] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' <6>[ 2.357032] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 2.357032] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 2.357032] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 <6>[ 2.357032] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format. <6>[ 2.357032] Freeing SMP alternatives memory: 36K <6>[ 2.357032] pid_max: default: 32768 minimum: 301 <6>[ 2.357032] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 2.357032] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 2.357032] Running RCU synchronous self tests <6>[ 2.357032] Running RCU synchronous self tests <6>[ 2.357032] smpboot: CPU0: Intel(R) Core(TM) Ultra 7 1002H (family: 0x6, model: 0xaa, stepping: 0x4) <6>[ 2.358164] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1. <6>[ 2.359069] Running RCU Tasks wait API self tests <6>[ 2.468086] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Meteorlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 2.469270] core: cpu_core PMU driver: <6>[ 2.470049] ... version: 5 <6>[ 2.471046] ... bit width: 48 <6>[ 2.472048] ... generic registers: 8 <6>[ 2.473047] ... value mask: 0000ffffffffffff <6>[ 2.474051] ... max period: 00007fffffffffff <6>[ 2.475050] ... fixed-purpose events: 4 <6>[ 2.476047] ... event mask: 0001000f000000ff <6>[ 2.477142] signal: max sigframe size: 3632 <6>[ 2.478076] Estimated ratio of average max frequency by base frequency (times 1024): 1505 <6>[ 2.479177] rcu: Hierarchical SRCU implementation. <6>[ 2.480049] rcu: Max phase no-delay instances is 400. <6>[ 2.483237] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 2.485087] smp: Bringing up secondary CPUs ... <6>[ 2.488262] smpboot: x86: Booting SMP configuration: <6>[ 2.489054] .... node #0, CPUs: #1 #3 #6 #8 #10 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 <6>[ 1.655916] core: cpu_atom PMU driver: PEBS-via-PT <6>[ 1.655916] ... version: 5 <6>[ 1.655916] ... bit width: 48 <6>[ 1.655916] ... generic registers: 8 <6>[ 1.655916] ... value mask: 0000ffffffffffff <6>[ 1.655916] ... max period: 00007fffffffffff <6>[ 1.655916] ... fixed-purpose events: 3 <6>[ 1.655916] ... event mask: 00000007000000ff <4>[ 2.549242] #2 #4 #5 #7 #9 #11 <6>[ 2.555105] smp: Brought up 1 node, 22 CPUs <6>[ 2.557039] smpboot: Max logical packages: 1 <6>[ 2.558039] smpboot: Total of 22 processors activated (148684.80 BogoMIPS) <6>[ 2.566324] devtmpfs: initialized <6>[ 2.569136] ACPI: PM: Registering ACPI NVS region [mem 0x63db7000-0x63edbfff] (1200128 bytes) <6>[ 2.570480] Running RCU synchronous self tests <6>[ 2.571050] Running RCU synchronous self tests <6>[ 2.572120] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 2.573054] futex hash table entries: 8192 (order: 8, 1048576 bytes, linear) <6>[ 2.574319] pinctrl core: initialized pinctrl subsystem <6>[ 2.575465] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 2.577104] thermal_sys: Registered thermal governor 'fair_share' <6>[ 2.577106] thermal_sys: Registered thermal governor 'step_wise' <6>[ 2.578041] thermal_sys: Registered thermal governor 'user_space' <6>[ 2.579100] cpuidle: using governor menu <6>[ 2.581097] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 2.582265] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff] <6>[ 2.583051] PCI: not using ECAM ([mem 0xc0000000-0xcfffffff] not reserved) <6>[ 2.584048] PCI: Using configuration type 1 for base access <6>[ 2.585172] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 2.586106] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 2.587043] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 2.588210] cryptd: max_cpu_qlen set to 1000 <6>[ 2.606036] raid6: avx2x4 gen() 57613 MB/s <6>[ 2.626860] raid6: avx2x2 gen() 50147 MB/s <6>[ 2.648033] raid6: avx2x1 gen() 49817 MB/s <6>[ 2.652049] raid6: using algorithm avx2x4 gen() 57613 MB/s <6>[ 2.673476] raid6: .... xor() 4011 MB/s, rmw enabled <6>[ 2.678057] raid6: using avx2x2 recovery algorithm <6>[ 2.678069] Callback from call_rcu_tasks() invoked. <6>[ 2.688207] ACPI: Added _OSI(Module Device) <6>[ 2.692049] ACPI: Added _OSI(Processor Device) <6>[ 2.697046] ACPI: Added _OSI(3.0 _SCP Extensions) <6>[ 2.701046] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 3.251180] ACPI: 28 ACPI AML tables successfully acquired and loaded <6>[ 3.273022] ACPI: EC: EC started <6>[ 3.276046] ACPI: EC: interrupt blocked <6>[ 3.286218] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 3.291049] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 3.642873] ACPI: _OSC evaluated successfully for all CPUs <6>[ 3.648051] ACPI: Interpreter enabled <6>[ 3.652180] ACPI: PM: (supports S0 S4 S5) <6>[ 3.656050] ACPI: Using IOAPIC for interrupt routing <6>[ 3.661237] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff] <6>[ 3.712032] PCI: ECAM [mem 0xc0000000-0xcfffffff] reserved as ACPI motherboard resource <6>[ 3.721077] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 3.730059] PCI: Ignoring E820 reservations for host bridge windows <6>[ 3.771568] ACPI: Enabled 10 GPEs in block 00 to 7F <6>[ 3.776067] ACPI: Enabled 8 GPEs in block 80 to DF <6>[ 3.852777] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 4.117212] ACPI: \_SB_.PC00.RP01.PXP_: New power resource <6>[ 4.145252] ACPI: \_SB_.PC00.RP06.PXP_: New power resource <6>[ 4.160590] ACPI: \_SB_.PC00.RP07.PXP_: New power resource <6>[ 4.183734] ACPI: \_SB_.PC00.RP09.PXP_: New power resource <6>[ 4.196730] ACPI: \_SB_.PC00.RP10.PXP_: New power resource <6>[ 4.210564] ACPI: \_SB_.PC00.RP11.PXP_: New power resource <6>[ 4.224391] ACPI: \_SB_.PC00.RP12.PXP_: New power resource <6>[ 4.417247] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 4.423485] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 4.428447] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 4.554261] ACPI: \_TZ_.FN00: New power resource <6>[ 4.559864] ACPI: \_TZ_.FN01: New power resource <6>[ 4.564835] ACPI: \_TZ_.FN02: New power resource <6>[ 4.570860] ACPI: \_TZ_.FN03: New power resource <6>[ 4.575839] ACPI: \_TZ_.FN04: New power resource <6>[ 4.585952] ACPI: \PIN_: New power resource <6>[ 4.593612] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 4.600066] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] <6>[ 4.613570] acpi PNP0A08:00: _OSC: platform does not support [AER] <6>[ 4.627774] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability LTR] <6>[ 4.647842] PCI host bridge to bus 0000:00 <6>[ 4.652052] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 4.659056] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 4.665055] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 4.673061] pci_bus 0000:00: root bus resource [mem 0x80000000-0xbfffffff window] <6>[ 4.680057] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x3ffbfffffff window] <6>[ 4.688060] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 4.705025] pci 0000:00:00.0: [8086:7d01] type 00 class 0x060000 conventional PCI endpoint <6>[ 4.713817] pci 0000:00:02.0: [8086:7d55] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint <6>[ 4.723076] pci 0000:00:02.0: BAR 0 [mem 0x5018000000-0x5018ffffff 64bit pref] <6>[ 4.730065] pci 0000:00:02.0: BAR 2 [mem 0x4000000000-0x400fffffff 64bit pref] <6>[ 4.738105] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics <6>[ 4.744056] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 4.752112] pci 0000:00:02.0: PME# supported from D0 D3hot <6>[ 4.759666] pci 0000:00:04.0: [8086:7d03] type 00 class 0x118000 conventional PCI endpoint <6>[ 4.767075] pci 0000:00:04.0: BAR 0 [mem 0x501a280000-0x501a29ffff 64bit] <6>[ 4.775678] pci 0000:00:05.0: [8086:7d19] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint <6>[ 4.785073] pci 0000:00:05.0: BAR 0 [mem 0x5019000000-0x5019ffffff 64bit] <6>[ 4.792073] pci 0000:00:05.0: enabling Extended Tags <6>[ 4.798200] pci 0000:00:06.0: [8086:7ecb] type 01 class 0x060400 PCIe Root Port <6>[ 4.805105] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 4.810073] pci 0000:00:06.0: bridge window [mem 0x8c000000-0x8c0fffff] <6>[ 4.817198] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold <6>[ 4.828822] pci 0000:00:07.0: [8086:7ec6] type 01 class 0x060400 PCIe Root Port <6>[ 4.836118] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 4.841086] pci 0000:00:07.0: bridge window [mem 0x86000000-0x8bffffff] <6>[ 4.848095] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 4.856320] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 4.867203] pci 0000:00:07.3: [8086:7ec7] type 01 class 0x060400 PCIe Root Port <6>[ 4.874124] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 4.880089] pci 0000:00:07.3: bridge window [mem 0x80000000-0x85ffffff] <6>[ 4.886094] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 4.894304] pci 0000:00:07.3: PME# supported from D0 D3hot D3cold <6>[ 4.906122] pci 0000:00:08.0: [8086:7e4c] type 00 class 0x088000 conventional PCI endpoint <6>[ 4.914074] pci 0000:00:08.0: BAR 0 [mem 0x501a2e3000-0x501a2e3fff 64bit] <6>[ 4.920606] pci 0000:00:0a.0: [8086:7d0d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint <6>[ 4.930071] pci 0000:00:0a.0: BAR 0 [mem 0x501a240000-0x501a27ffff 64bit] <6>[ 4.937074] pci 0000:00:0a.0: enabling Extended Tags <6>[ 4.942317] pci 0000:00:0b.0: [8086:7d1d] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint <6>[ 4.951072] pci 0000:00:0b.0: BAR 0 [mem 0x5010000000-0x5017ffffff 64bit] <6>[ 4.958068] pci 0000:00:0b.0: BAR 4 [mem 0x501a2e2000-0x501a2e2fff 64bit] <6>[ 4.965626] pci 0000:00:0d.0: [8086:7ec0] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 4.973097] pci 0000:00:0d.0: BAR 0 [mem 0x501a2c0000-0x501a2cffff 64bit] <6>[ 4.980171] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 4.988130] pci 0000:00:0d.3: [8086:7ec3] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 4.996095] pci 0000:00:0d.3: BAR 0 [mem 0x501a200000-0x501a23ffff 64bit] <6>[ 5.003086] pci 0000:00:0d.3: BAR 2 [mem 0x501a2e1000-0x501a2e1fff 64bit] <6>[ 5.010187] pci 0000:00:0d.3: supports D1 D2 <6>[ 5.014047] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 5.022741] pci 0000:00:12.0: [8086:7e45] type 00 class 0x070000 conventional PCI endpoint <6>[ 5.030073] pci 0000:00:12.0: BAR 0 [mem 0x501a2b0000-0x501a2bffff 64bit] <6>[ 5.037125] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 5.046085] pci 0000:00:14.0: [8086:7e7d] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 5.054076] pci 0000:00:14.0: BAR 0 [mem 0x501a2a0000-0x501a2affff 64bit] <6>[ 5.060141] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 5.068488] pci 0000:00:14.2: [8086:7e7f] type 00 class 0x050000 conventional PCI endpoint <6>[ 5.077095] pci 0000:00:14.2: BAR 0 [mem 0x501a2d4000-0x501a2d7fff 64bit] <6>[ 5.084065] pci 0000:00:14.2: BAR 2 [mem 0x501a2e0000-0x501a2e0fff 64bit] <6>[ 5.090437] pci 0000:00:15.0: [8086:7e78] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 5.099112] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 5.106844] pci 0000:00:15.1: [8086:7e79] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 5.115110] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 5.123814] pci 0000:00:15.2: [8086:7e7a] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 5.131112] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 5.139864] pci 0000:00:15.3: [8086:7e7b] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 5.148107] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 5.155831] pci 0000:00:16.0: [8086:7e70] type 00 class 0x078000 conventional PCI endpoint <6>[ 5.164084] pci 0000:00:16.0: BAR 0 [mem 0x501a2db000-0x501a2dbfff 64bit] <6>[ 5.171164] pci 0000:00:16.0: PME# supported from D3hot <6>[ 5.179034] pci 0000:00:16.3: [8086:7e73] type 00 class 0x070002 conventional PCI endpoint <6>[ 5.187070] pci 0000:00:16.3: BAR 0 [io 0x3020-0x3027] <6>[ 5.192054] pci 0000:00:16.3: BAR 1 [mem 0x8c121000-0x8c121fff] <6>[ 5.198434] pci 0000:00:19.0: [8086:7e50] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 5.207112] pci 0000:00:19.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 5.213843] pci 0000:00:19.1: [8086:7e51] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 5.222108] pci 0000:00:19.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 5.229774] pci 0000:00:1f.0: [8086:7e02] type 00 class 0x060100 conventional PCI endpoint <6>[ 5.239812] pci 0000:00:1f.3: [8086:7e28] type 00 class 0x040100 conventional PCI endpoint <6>[ 5.248102] pci 0000:00:1f.3: BAR 0 [mem 0x501a2d0000-0x501a2d3fff 64bit] <6>[ 5.255108] pci 0000:00:1f.3: BAR 4 [mem 0x501a000000-0x501a1fffff 64bit] <6>[ 5.262177] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 5.268570] pci 0000:00:1f.4: [8086:7e22] type 00 class 0x0c0500 conventional PCI endpoint <6>[ 5.276080] pci 0000:00:1f.4: BAR 0 [mem 0x501a2d8000-0x501a2d80ff 64bit] <6>[ 5.283080] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] <6>[ 5.289525] pci 0000:00:1f.5: [8086:7e23] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 5.298093] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] <6>[ 5.304420] pci 0000:00:1f.6: [8086:550a] type 00 class 0x020000 conventional PCI endpoint <6>[ 5.312085] pci 0000:00:1f.6: BAR 0 [mem 0x8c100000-0x8c11ffff] <6>[ 5.318224] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold <6>[ 5.325861] pci 0000:01:00.0: [15b7:501e] type 00 class 0x010802 PCIe Endpoint <6>[ 5.333213] pci 0000:01:00.0: BAR 0 [mem 0x8c000000-0x8c003fff 64bit] <6>[ 5.341512] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 5.346277] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 5.351284] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <7>[ 5.357109] pci_bus 0000:00: on NUMA node 0 <6>[ 9.592348] Low-power S0 idle used by default for system suspend <6>[ 10.005942] ACPI: EC: interrupt unblocked <6>[ 10.010051] ACPI: EC: event unblocked <6>[ 10.014079] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 10.019050] ACPI: EC: GPE=0x6e <6>[ 10.022047] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 10.029061] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 10.037054] iommu: Default domain type: Passthrough (set via kernel command line) <5>[ 10.044723] SCSI subsystem initialized <7>[ 10.049113] libata version 3.00 loaded. <6>[ 10.049238] ACPI: bus type USB registered <6>[ 10.053144] usbcore: registered new interface driver usbfs <6>[ 10.059094] usbcore: registered new interface driver hub <6>[ 10.064133] usbcore: registered new device driver usb <6>[ 10.070330] efivars: Registered efivars operations <6>[ 10.075210] Advanced Linux Sound Architecture Driver Initialized. <6>[ 10.082015] PCI: Using ACPI for IRQ routing <7>[ 10.104095] PCI: pci_cache_line_size set to 64 bytes <6>[ 10.104347] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window <7>[ 10.114316] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 10.114329] e820: reserve RAM buffer [mem 0x5ae00000-0x5bffffff] <7>[ 10.114334] e820: reserve RAM buffer [mem 0x5bda0000-0x5bffffff] <7>[ 10.114338] e820: reserve RAM buffer [mem 0x60a3f000-0x63ffffff] <6>[ 10.114490] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 10.115032] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 10.115032] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 10.134053] vgaarb: loaded <6>[ 10.137302] clocksource: Switched to clocksource tsc-early <6>[ 10.143539] pnp: PnP ACPI init <6>[ 10.147928] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 10.153816] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 10.160430] system 00:01: [io 0x1854-0x1857] has been reserved <6>[ 10.168052] system 00:03: [io 0x06a4] has been reserved <6>[ 10.173331] system 00:03: [io 0x06a0] has been reserved <6>[ 10.205383] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 10.211957] system 00:04: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 10.218869] system 00:04: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 10.225779] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 10.232349] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved <6>[ 10.239260] system 00:04: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 10.246169] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 10.253079] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 10.266064] system 00:05: [io 0x2000-0x20fe] has been reserved <6>[ 10.273435] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved <6>[ 10.283881] pnp: PnP ACPI: found 8 devices <6>[ 10.300806] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 10.309950] NET: Registered PF_INET protocol family <6>[ 10.315130] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 10.325801] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear) <6>[ 10.334700] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 10.342400] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 10.350715] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage) <6>[ 10.360346] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 10.367354] UDP hash table entries: 16384 (order: 9, 2621440 bytes, linear) <6>[ 10.374912] UDP-Lite hash table entries: 16384 (order: 9, 2621440 bytes, linear) <6>[ 10.383089] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 10.388743] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 02-2b] add_size 1000 <6>[ 10.397115] pci 0000:00:07.3: bridge window [io 0x1000-0x0fff] to [bus 2c-55] add_size 1000 <6>[ 10.405510] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned <6>[ 10.412240] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff]: assigned <6>[ 10.418974] pci 0000:00:15.0: BAR 0 [mem 0x501a2d9000-0x501a2d9fff 64bit]: assigned <6>[ 10.426612] pci 0000:00:15.1: BAR 0 [mem 0x501a2da000-0x501a2dafff 64bit]: assigned <6>[ 10.434268] pci 0000:00:15.2: BAR 0 [mem 0x501a2dc000-0x501a2dcfff 64bit]: assigned <6>[ 10.441897] pci 0000:00:15.3: BAR 0 [mem 0x501a2dd000-0x501a2ddfff 64bit]: assigned <6>[ 10.449525] pci 0000:00:19.0: BAR 0 [mem 0x501a2de000-0x501a2defff 64bit]: assigned <6>[ 10.457154] pci 0000:00:19.1: BAR 0 [mem 0x501a2df000-0x501a2dffff 64bit]: assigned <6>[ 10.464784] pci 0000:00:1f.5: BAR 0 [mem 0x8c120000-0x8c120fff]: assigned <6>[ 10.471551] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 10.476506] pci 0000:00:06.0: bridge window [mem 0x8c000000-0x8c0fffff] <6>[ 10.483266] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 10.488485] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 10.494568] pci 0000:00:07.0: bridge window [mem 0x86000000-0x8bffffff] <6>[ 10.501339] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 10.509397] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 10.514615] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff] <6>[ 10.520694] pci 0000:00:07.3: bridge window [mem 0x80000000-0x85ffffff] <6>[ 10.527459] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 10.535512] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 10.541648] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 10.547790] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 10.554608] pci_bus 0000:00: resource 7 [mem 0x80000000-0xbfffffff window] <6>[ 10.561430] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x3ffbfffffff window] <6>[ 10.568676] pci_bus 0000:01: resource 1 [mem 0x8c000000-0x8c0fffff] <6>[ 10.574897] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] <6>[ 10.580428] pci_bus 0000:02: resource 1 [mem 0x86000000-0x8bffffff] <6>[ 10.586646] pci_bus 0000:02: resource 2 [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 10.594155] pci_bus 0000:2c: resource 0 [io 0x5000-0x5fff] <6>[ 10.599683] pci_bus 0000:2c: resource 1 [mem 0x80000000-0x85ffffff] <6>[ 10.605897] pci_bus 0000:2c: resource 2 [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 10.614902] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 10.622942] PCI: CLS 0 bytes, default 64 <6>[ 10.626960] DMAR: No RMRR found <6>[ 10.630111] DMAR: No ATSR found <6>[ 10.633243] DMAR: IOMMU feature sc_support inconsistent <6>[ 10.633248] DMAR: dmar0: Using Queued invalidation <6>[ 10.643213] DMAR: dmar1: Using Queued invalidation <6>[ 10.648824] pci 0000:00:02.0: Adding to iommu group 0 <6>[ 10.654387] pci 0000:00:00.0: Adding to iommu group 1 <6>[ 10.659480] pci 0000:00:04.0: Adding to iommu group 2 <6>[ 10.664567] pci 0000:00:05.0: Adding to iommu group 3 <6>[ 10.669680] pci 0000:00:06.0: Adding to iommu group 4 <6>[ 10.674801] pci 0000:00:07.0: Adding to iommu group 5 <6>[ 10.679923] pci 0000:00:07.3: Adding to iommu group 6 <6>[ 10.685008] pci 0000:00:08.0: Adding to iommu group 7 <6>[ 10.690096] pci 0000:00:0a.0: Adding to iommu group 8 <6>[ 10.695183] pci 0000:00:0b.0: Adding to iommu group 9 <6>[ 10.700308] pci 0000:00:0d.0: Adding to iommu group 10 <6>[ 10.705474] pci 0000:00:0d.3: Adding to iommu group 10 <6>[ 10.710665] pci 0000:00:12.0: Adding to iommu group 11 <6>[ 10.715882] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 10.721042] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 10.726287] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 10.731451] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 10.736615] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 10.741799] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 10.747016] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 10.752189] pci 0000:00:16.3: Adding to iommu group 14 <6>[ 10.757402] pci 0000:00:19.0: Adding to iommu group 15 <6>[ 10.762571] pci 0000:00:19.1: Adding to iommu group 15 <6>[ 10.767833] pci 0000:00:1f.0: Adding to iommu group 16 <6>[ 10.773004] pci 0000:00:1f.3: Adding to iommu group 16 <6>[ 10.778170] pci 0000:00:1f.4: Adding to iommu group 16 <6>[ 10.783336] pci 0000:00:1f.5: Adding to iommu group 16 <6>[ 10.788500] pci 0000:00:1f.6: Adding to iommu group 16 <6>[ 10.793690] pci 0000:01:00.0: Adding to iommu group 17 <6>[ 10.799452] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 10.805836] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 10.812225] software IO TLB: mapped [mem 0x0000000056e00000-0x000000005ae00000] (64MB) <6>[ 10.820578] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 10.828431] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 10.834133] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 10.839746] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules <6>[ 10.845358] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 10.852880] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 10.862863] clocksource: Switched to clocksource tsc <6>[ 10.867954] platform rtc_cmos: registered platform RTC device (no PNP device found) <6>[ 10.890803] workingset: timestamp_bits=62 max_order=23 bucket_order=0 <6>[ 10.900683] ntfs: driver 2.1.32 [Flags: R/O]. <6>[ 10.912864] NET: Registered PF_ALG protocol family <6>[ 10.917645] xor: automatically using best checksumming function avx <6>[ 10.924703] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) <6>[ 10.932043] io scheduler mq-deadline registered <6>[ 10.936548] io scheduler kyber registered <6>[ 10.942797] pcieport 0000:00:06.0: PME: Signaling with IRQ 122 <6>[ 10.950184] pcieport 0000:00:07.0: PME: Signaling with IRQ 123 <6>[ 10.956188] pcieport 0000:00:07.0: pciehp: Slot #14 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ <6>[ 10.971619] pcieport 0000:00:07.3: PME: Signaling with IRQ 124 <6>[ 10.977522] pcieport 0000:00:07.3: pciehp: Slot #15 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ <6>[ 10.997692] ACPI: AC: AC Adapter [ADP1] (on-line) <6>[ 11.002601] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 11.013825] ACPI: button: Lid Switch [LID0] <6>[ 11.018200] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 11.026597] ACPI: button: Sleep Button [SLPB] <6>[ 11.031088] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 11.040191] ACPI: button: Power Button [PWRB] <6>[ 11.094853] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 11.100477] ACPI: thermal: Thermal Zone [TZ00] (35 C) <6>[ 11.106066] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled <6>[ 11.107438] ACPI: battery: Slot [BAT0] (battery present) <6>[ 11.117702] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 11.118855] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 11.127411] serial 0000:00:12.0: enabling device (0000 -> 0002) <6>[ 11.137601] serial 0000:00:16.3: enabling device (0000 -> 0003) <6>[ 11.144801] 0000:00:16.3: ttyS1 at I/O 0x3020 (irq = 19, base_baud = 115200) is a 16550A <4>[ 11.153606] hpet_acpi_add: no address or irqs in _CRS <6>[ 11.159091] Non-volatile memory driver v1.3 <6>[ 11.163413] Linux agpgart interface v0.103 <6>[ 11.198653] ACPI: bus type drm_connector registered <6>[ 11.215015] loop: module loaded <6>[ 11.219178] nvme 0000:01:00.0: platform quirk: setting simple suspend <6>[ 11.219632] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 11.226041] nvme nvme0: pci function 0000:01:00.0 <6>[ 11.230779] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 11.243937] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 11.253876] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 11.259067] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 11.265770] nvme nvme0: allocated 64 MiB host memory buffer. <6>[ 11.266390] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 11.279512] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08 <6>[ 11.287703] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 11.294854] usb usb1: Product: xHCI Host Controller <6>[ 11.299690] usb usb1: Manufacturer: Linux 6.8.0-rc6-linus-v6.8-rc6-gd206a76d7d27+ xhci-hcd <6>[ 11.307871] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 11.314240] hub 1-0:1.0: USB hub found <6>[ 11.318056] hub 1-0:1.0: 1 port detected <6>[ 11.318246] nvme nvme0: 16/0/0 default/read/poll queues <6>[ 11.325607] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.08 <6>[ 11.335326] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 11.335711] nvme0n1: p1 p2 <6>[ 11.342472] usb usb2: Product: xHCI Host Controller <6>[ 11.342476] usb usb2: Manufacturer: Linux 6.8.0-rc6-linus-v6.8-rc6-gd206a76d7d27+ xhci-hcd <6>[ 11.342479] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 11.343265] hub 2-0:1.0: USB hub found <6>[ 11.366816] hub 2-0:1.0: 4 ports detected <6>[ 11.393909] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 11.399118] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 11.407617] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 11.417984] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 11.423190] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 11.430530] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 11.438142] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08 <6>[ 11.446346] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 11.453510] usb usb3: Product: xHCI Host Controller <6>[ 11.458357] usb usb3: Manufacturer: Linux 6.8.0-rc6-linus-v6.8-rc6-gd206a76d7d27+ xhci-hcd <6>[ 11.466552] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 11.471946] hub 3-0:1.0: USB hub found <6>[ 11.475830] hub 3-0:1.0: 12 ports detected <6>[ 11.513348] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.08 <6>[ 11.521553] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 11.528722] usb usb4: Product: xHCI Host Controller <6>[ 11.533573] usb usb4: Manufacturer: Linux 6.8.0-rc6-linus-v6.8-rc6-gd206a76d7d27+ xhci-hcd <6>[ 11.542044] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 11.547442] hub 4-0:1.0: USB hub found <6>[ 11.551220] hub 4-0:1.0: 2 ports detected <6>[ 11.566655] usbcore: registered new interface driver usb-storage <6>[ 11.573124] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 11.579885] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <3>[ 12.291444] i8042: Can't read CTR while initializing i8042 <4>[ 12.297357] i8042: probe of i8042 failed with error -5 <6>[ 12.303310] mousedev: PS/2 mouse device common for all mice <6>[ 12.311332] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 12.319271] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 12.324381] rtc_cmos rtc_cmos: setting system clock to 1998-09-14T03:27:54 UTC (905743674) <6>[ 12.333039] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 12.340128] IR JVC protocol handler initialized <6>[ 12.344635] IR MCE Keyboard/mouse protocol handler initialized <6>[ 12.350426] IR NEC protocol handler initialized <6>[ 12.354957] IR RC5(x/sz) protocol handler initialized <6>[ 12.360182] IR RC6 protocol handler initialized <6>[ 12.364706] IR SANYO protocol handler initialized <6>[ 12.369381] IR Sharp protocol handler initialized <6>[ 12.374054] IR Sony protocol handler initialized <6>[ 12.378643] IR XMP protocol handler initialized <6>[ 12.388568] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 12.397163] softdog: soft_reboot_cmd= soft_active_on_boot=0 <6>[ 12.405220] device-mapper: uevent: version 1.0.3 <6>[ 12.411487] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com <6>[ 12.419940] intel_pstate: Intel P-state driver initializing <6>[ 12.435006] intel_pstate: HWP enabled <6>[ 12.438798] sdhci: Secure Digital Host Controller Interface driver <6>[ 12.444927] sdhci: Copyright(c) Pierre Ossman <6>[ 12.451077] efifb: probing for efifb <6>[ 12.454673] efifb: framebuffer at 0x70800000, using 20252k, total 20250k <6>[ 12.461330] efifb: mode is 2880x1800x32, linelength=11520, pages=1 <6>[ 12.467466] efifb: scrolling: redraw <6>[ 12.471027] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 <6>[ 12.482649] Console: switching to colour frame buffer device 360x112 <6>[ 12.493861] fb0: EFI VGA frame buffer device <6>[ 12.498602] pstore: Using crash dump compression: deflate <6>[ 12.503986] pstore: Registered efi_pstore as persistent store backend <6>[ 12.510459] hid: raw HID events driver (C) Jiri Kosina <6>[ 12.515940] usbcore: registered new interface driver usbhid <6>[ 12.521469] usbhid: USB HID core driver <6>[ 12.524583] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd <6>[ 12.525350] intel_rapl_msr: PL4 support detected. <6>[ 12.536757] intel_rapl_common: Found RAPL domain package <6>[ 12.542127] intel_rapl_common: Found RAPL domain core <6>[ 12.547182] intel_rapl_common: Found RAPL domain uncore <6>[ 12.548083] usb 4-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 <6>[ 12.552378] intel_rapl_common: Found RAPL domain psys <6>[ 12.565804] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 <6>[ 12.567418] Initializing XFRM netlink socket <6>[ 12.572880] usb 4-1: Product: USB 10/100/1000 LAN <6>[ 12.572884] usb 4-1: Manufacturer: Realtek <6>[ 12.572886] usb 4-1: SerialNumber: 000001 <6>[ 12.590094] NET: Registered PF_INET6 protocol family <6>[ 12.596589] Segment Routing with IPv6 <6>[ 12.600314] In-situ OAM (IOAM) with IPv6 <6>[ 12.604242] mip6: Mobile IPv6 <6>[ 12.607203] NET: Registered PF_PACKET protocol family <6>[ 12.612219] NET: Registered PF_KEY protocol family <4>[ 12.628642] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 12.636808] microcode: Current revision: 0x0000001c <6>[ 12.644337] IPI shorthand broadcast: enabled <6>[ 12.648605] AVX2 version of gcm_enc/dec engaged. <6>[ 12.655845] AES CTR mode by8 optimization enabled <6>[ 12.667376] sched_clock: Marking stable (11012001443, 1654916068)->(13136556351, -469638840) <6>[ 12.676860] registered taskstats version 1 <6>[ 12.689847] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers <6>[ 12.701165] Btrfs loaded, zoned=no, fsverity=no <6>[ 12.710525] clk: Disabling unused clocks <6>[ 12.714486] ALSA device list: <6>[ 12.717515] No soundcards found. <6>[ 12.721640] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) <6>[ 12.785688] EXT4-fs (nvme0n1p2): mounted filesystem 014837a2-534c-4da2-825c-eb72347fbe34 ro with ordered data mode. Quota mode: disabled. <6>[ 12.797948] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 12.805778] devtmpfs: mounted <6>[ 12.810252] Freeing unused kernel image (initmem) memory: 2636K <6>[ 12.816137] Write protecting the kernel read-only data: 22528k <6>[ 12.823106] Freeing unused kernel image (rodata/data gap) memory: 492K <6>[ 12.829619] Run /sbin/init as init process <7>[ 12.833681] with arguments: <7>[ 12.833682] /sbin/init <7>[ 12.833682] 3 <7>[ 12.833683] with environment: <7>[ 12.833684] HOME=/ <7>[ 12.833685] TERM=linux <7>[ 12.833685] BOOT_IMAGE=/boot/drm_intel <7>[ 12.913114] systemd[1]: System time before build time, advancing clock. <7>[ 12.997808] systemd[1]: systemd 245.4-4ubuntu3.19 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) <7>[ 13.020385] systemd[1]: Detected architecture x86-64. <7>[ 13.040365] systemd[1]: Set hostname to . <6>[ 13.089440] mkdir (197) used greatest stack depth: 12632 bytes left <6>[ 13.095722] systemd-bless-b (195) used greatest stack depth: 11704 bytes left <7>[ 13.232549] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. <7>[ 13.245037] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) <7>[ 13.254413] systemd[1]: Created slice system-modprobe.slice. <7>[ 13.269873] systemd[1]: Created slice system-serial\x2dgetty.slice. <7>[ 13.285829] systemd[1]: Created slice system-systemd\x2dfsck.slice. <7>[ 13.301414] systemd[1]: Created slice User and Session Slice. <7>[ 13.315412] systemd[1]: Started Forward Password Requests to Wall Directory Watch. <7>[ 13.333072] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. <7>[ 13.344596] systemd[1]: Reached target Remote File Systems. <7>[ 13.360377] systemd[1]: Reached target Slices. <7>[ 13.373772] systemd[1]: Listening on Device-mapper event daemon FIFOs. <7>[ 13.391663] systemd[1]: Listening on Syslog Socket. <7>[ 13.404804] systemd[1]: Listening on fsck to fsckd communication Socket. <7>[ 13.423655] systemd[1]: Listening on initctl Compatibility Named Pipe. <7>[ 13.449656] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. <7>[ 13.458208] systemd[1]: Listening on Journal Socket (/dev/log). <7>[ 13.473639] systemd[1]: Listening on Journal Socket. <7>[ 13.486667] systemd[1]: Listening on udev Control Socket. <7>[ 13.501457] systemd[1]: Listening on udev Kernel Socket. <7>[ 13.531759] systemd[1]: Mounting Huge Pages File System... <7>[ 13.550053] systemd[1]: Mounting POSIX Message Queue File System... <7>[ 13.576533] systemd[1]: Mounting Kernel Debug File System... <7>[ 13.593291] systemd[1]: Mounting Kernel Trace File System... <7>[ 13.616440] systemd[1]: Starting Journal Service... <7>[ 13.634380] systemd[1]: Starting Set the console keyboard layout... <7>[ 13.655453] systemd[1]: Starting Create list of static device nodes for the current kernel... <7>[ 13.675087] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. <7>[ 13.683751] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. <7>[ 13.702169] systemd[1]: Starting File System Check on Root Device... <7>[ 13.719612] systemd[1]: Starting Load Kernel Modules... <7>[ 13.726672] systemd[1]: Starting udev Coldplug all Devices... <7>[ 13.735396] systemd[1]: Starting Uncomplicated firewall... <7>[ 13.743427] systemd[1]: Started Journal Service. <6>[ 13.914118] EXT4-fs (nvme0n1p2): re-mounted 014837a2-534c-4da2-825c-eb72347fbe34 r/w. Quota mode: disabled. <6>[ 13.964356] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SS <7>[ 13.978826] systemd-journald[218]: Received client request to flush runtime journal. <5>[ 13.985260] systemd-journald[218]: File /var/log/journal/9a8a5729dd38de7a803effd961f12914/system.journal corrupted or uncleanly shut down, renaming and replacing. <6>[ 14.341868] pps_core: LinuxPPS API ver. 1 registered <6>[ 14.341876] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 14.347943] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 14.350775] i801_smbus 0000:00:1f.4: SPD Write Disable is set <6>[ 14.350948] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt <6>[ 14.353682] PTP clock support registered <6>[ 14.455227] i2c i2c-0: 8/8 memory slots populated (from DMI) <6>[ 14.455230] i2c i2c-0: Memory type 0x23 not supported yet, not instantiating SPD <6>[ 14.472185] usbcore: registered new device driver r8152-cfgselector <6>[ 14.475909] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 14.475913] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 14.477225] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode <6>[ 14.493493] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <6>[ 14.493633] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 14.508841] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <6>[ 14.513401] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <6>[ 14.520021] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 14.590991] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <6>[ 14.595494] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <6>[ 14.598998] r8152-cfgselector 4-1: reset SuperSpeed USB device number 2 using xhci_hcd <6>[ 14.603560] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 14.642356] r8152 4-1:1.0: load rtl8153a-4 v2 02/07/20 successfully <6>[ 14.659607] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <6>[ 14.663266] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <6>[ 14.668129] r8152 4-1:1.0 eth0: v1.12.13 <6>[ 14.668223] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <6>[ 14.668261] usbcore: registered new interface driver r8152 <6>[ 14.671673] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <6>[ 14.677961] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock <4>[ 14.705459] ********************************************************** <4>[ 14.705460] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 14.705462] ** ** <4>[ 14.705462] ** trace_printk() being used. Allocating extra memory. ** <4>[ 14.705463] ** ** <4>[ 14.705464] ** This means that this is a DEBUG kernel and it is ** <4>[ 14.705465] ** unsafe for production use. ** <4>[ 14.705466] ** ** <4>[ 14.705467] ** If you see this message and you are not debugging ** <4>[ 14.705468] ** the kernel, report this immediately to your vendor! ** <4>[ 14.705469] ** ** <4>[ 14.705470] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 14.705470] ********************************************************** <6>[ 14.725964] usbcore: registered new interface driver cdc_ether <6>[ 14.727540] usbcore: registered new interface driver r8153_ecm <6>[ 14.741717] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88 <6>[ 14.741720] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection <6>[ 14.741830] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF <6>[ 14.742258] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <6>[ 14.746022] e1000e 0000:00:1f.6 eno0: renamed from eth1 <6>[ 14.748831] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <6>[ 14.751179] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <6>[ 14.758621] r8152 4-1:1.0 enxe2015072f13a: renamed from eth0 <7>[ 14.759295] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7>[ 14.759471] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:no slpc:yes) <7>[ 14.759605] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Meteor Lake PCH <7>[ 14.759709] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7>[ 14.759832] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT1: Setting up Standalone Media GT <7>[ 14.759941] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7>[ 14.760047] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT1: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes) <7>[ 14.760224] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7>[ 14.760327] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 38400 kHz <7>[ 14.760870] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vdbox enable: 0000, instances: 0000 <6>[ 14.760949] intel-lpss 0000:00:19.0: enabling device (0000 -> 0002) <7>[ 14.760955] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vebox enable: 0000, instances: 0000 <7>[ 14.761343] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vdbox enable: 0005, instances: 0005 <7>[ 14.761420] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vebox enable: 0001, instances: 0001 <7>[ 14.761880] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7>[ 14.761970] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 0M <7>[ 14.762047] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 0M <6>[ 14.762124] i915 0000:00:02.0: [drm] VT-d active for gfx access <6>[ 14.762785] Console: switching to colour dummy device 80x25 <6>[ 14.763996] i915 0000:00:02.0: vgaarb: deactivate vga console <6>[ 14.764126] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7>[ 14.764139] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000078400947 <7>[ 14.764780] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 131072K, usable: 126976K <7>[ 14.765308] i915 0000:00:02.0: [drm:init_stolen_lmem [i915]] Stolen Local memory IO start: 0x0000004000800000 <7>[ 14.765410] i915 0000:00:02.0: [drm:init_stolen_lmem [i915]] Stolen Local DSM base: 0x0000000000800000 <7>[ 14.765758] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x63e09018 <7>[ 14.765876] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 3.0.0 <7>[ 14.766167] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7>[ 14.766263] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7>[ 14.766412] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7>[ 14.766500] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Mailbox #2 for backlight present <7>[ 14.766602] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 14.766695] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 8 <7>[ 14.766775] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: yes <7>[ 14.766852] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=3200 tRP=64 tRDPRE=40 tRAS=136 tRCD=64 tRC=200 <7>[ 14.766996] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=6000 tRP=112 tRDPRE=80 tRAS=0 tRCD=112 tRC=112 <7>[ 14.767110] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=16 tRCD=120 tRC=136 <7>[ 14.767227] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 3: DCLK=5600 tRP=104 tRDPRE=80 tRAS=240 tRCD=104 tRC=344 <7>[ 14.767336] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 0: num_planes=0 deratedbw=28913 peakbw: 51200 <7>[ 14.767443] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 14.767548] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 14.767648] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 14.767745] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 0: num_planes=0 deratedbw=35532 peakbw: 51200 <7>[ 14.767842] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 14.767951] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 14.768048] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 14.768146] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 14.768248] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 14.768348] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 14.768448] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 14.768547] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 14.768647] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 14.768744] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 14.768837] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 14.768945] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 14.769040] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 14.769139] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 14.769240] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 14.769434] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 14.769533] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 14.769628] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 14.769718] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 14.770077] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7>[ 14.770187] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT METEORLAKE ", BDB version 253 <7>[ 14.770298] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7) <7>[ 14.770401] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5) <7>[ 14.770498] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100) <7>[ 14.770592] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7>[ 14.770773] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 814, min size 812) <7>[ 14.770870] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34) <7>[ 14.770979] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers <7>[ 14.771081] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7>[ 14.771187] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366) <7>[ 14.771293] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305) <7>[ 14.771397] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 98, min size 78) <7>[ 14.771495] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7>[ 14.771588] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210) <7>[ 14.771681] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 14.771775] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7>[ 14.771868] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Expected child device config size for VBT version 253 not known; assuming 39 <7>[ 14.771976] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7>[ 14.772166] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7>[ 14.772266] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 14.772364] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7>[ 14.772460] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 14.772560] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 14.772660] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7>[ 14.772758] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 14.772847] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 14.772954] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 14.773044] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 14.773138] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 14.773243] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 14.773347] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a <7>[ 14.773539] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 14.773727] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7>[ 14.773868] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 14.774072] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 14.774267] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7>[ 14.774386] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7>[ 14.774483] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 14.774580] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 14.774726] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <6>[ 14.774835] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem <7>[ 14.774849] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7>[ 14.774966] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B <7>[ 14.775068] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C <7>[ 14.775170] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D <7>[ 14.775364] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/mtl_dmc.bin <7>[ 14.776064] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7>[ 14.777365] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7>[ 14.777488] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x86fc0 <7>[ 14.777600] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7>[ 14.777701] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f004 = 0x42c0408 (EVT_HTP) <7>[ 14.777567] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us <7>[ 14.777800] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL) <7>[ 14.777897] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x8f008 = 0x534052f4 (EVT_HTP) <7>[ 14.778017] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 1: <7>[ 14.778112] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f074 = 0x96fc0 <7>[ 14.778037] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 7 (7.0 usec) <7>[ 14.778205] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling) <7>[ 14.778297] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f004 = 0x212c20f4 (EVT_HTP) <7>[ 14.778485] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling) <7>[ 14.778576] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f008 = 0x222021e8 (EVT_HTP) <7>[ 14.778444] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 91 (91.0 usec) <7>[ 14.778668] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 14.778762] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f00c = 0x23f422dc (EVT_HTP) <7>[ 14.778853] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[7]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 14.778819] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 92 (92.0 usec) <7>[ 14.778955] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[8]: 0x5f010 = 0x26ec26c0 (EVT_HTP) <7>[ 14.779047] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 2: <7>[ 14.779137] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f474 = 0x9efc0 <7>[ 14.779230] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling) <7>[ 14.779326] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f404 = 0xa618a5e0 (EVT_HTP) <7>[ 14.779199] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 107 (107.0 usec) <7>[ 14.779422] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling) <7>[ 14.779513] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f408 = 0xa70ca6d4 (EVT_HTP) <7>[ 14.779602] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 14.779552] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 108 (108.0 usec) <7>[ 14.779701] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f40c = 0xa8e0a7c8 (EVT_HTP) <7>[ 14.779956] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[7]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 14.779899] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 161 (161.0 usec) <7>[ 14.780052] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[8]: 0x5f410 = 0xabd8abac (EVT_HTP) <7>[ 14.780146] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 3: <7>[ 14.780237] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f874 = 0x53fc0 <7>[ 14.780326] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 14.780417] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f80c = 0x24a02388 (EVT_HTP) <7>[ 14.780508] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 14.780598] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f810 = 0x2798276c (EVT_HTP) <7>[ 14.780691] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 4: <7>[ 14.780779] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5fc74 = 0x5afc0 <7>[ 14.780867] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 14.780960] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5fc0c = 0x94a09388 (EVT_HTP) <7>[ 14.781047] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5fc40 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 14.781133] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5fc10 = 0x9798976c (EVT_HTP) <7>[ 14.788362] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 4 display pipes available. <7>[ 14.790134] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <6>[ 14.790281] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/mtl_dmc.bin (v2.21) <7>[ 14.790711] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz <7>[ 14.790836] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] Max dotclock rate: 1305600 kHz <7>[ 14.790988] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:235:DDI A/PHY A] Using AUX CH A (VBT) <7>[ 14.791114] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:235:DDI A/PHY A] <7>[ 14.791255] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7>[ 14.791376] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7>[ 14.791488] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7>[ 14.791599] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 14.791706] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7>[ 14.791811] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7>[ 14.791921] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7>[ 14.792025] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7>[ 14.792128] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 14.792251] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:235:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 14.792414] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000 <7>[ 14.792512] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7>[ 14.792603] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7>[ 14.792691] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7>[ 14.792777] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 14.792979] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 14.793218] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 14.794658] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on <7>[ 14.794842] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 14.796735] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 00 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 14.797675] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7>[ 14.798308] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 04 83 85 <7>[ 14.799179] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel <7>[ 14.800007] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 3 <7>[ 14.801492] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] PSR2 supported <7>[ 14.803904] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 14.811242] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 14.811254] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 14.811256] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 14.811290] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:236:eDP-1] using preferred EDID fixed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 14.811946] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:236:eDP-1] Performing OUI wait (0 ms) <7>[ 14.812682] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:236:eDP-1] DRRS type: none <7>[ 14.812836] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:236:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 14.812964] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:236:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 14.813095] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000 <7>[ 14.813186] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7>[ 14.813274] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7>[ 14.813366] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7>[ 14.813569] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 14.813778] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 14.814014] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:244:DDI B/PHY B] Using AUX CH B (VBT) <7>[ 14.814119] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:244:DDI B/PHY B] <7>[ 14.814363] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7>[ 14.817241] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel <7>[ 14.818703] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:244:DDI B/PHY B] <7>[ 14.818798] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:244:DDI B/PHY B] Using DDC pin 0x2 (VBT) <7>[ 14.818974] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:262:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7>[ 14.819163] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 14.819334] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:262:DDI TC1/PHY TC1] <7>[ 14.840913] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -6 <7>[ 14.840980] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel <6>[ 14.859593] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <7>[ 14.862735] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -6 <7>[ 14.862818] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:271:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7>[ 14.863410] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port E/TC#2: PHY mode: disconnected (ready: yes, owned: no, HPD: disconnected) <7>[ 14.863976] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7>[ 14.864882] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) <7>[ 14.865316] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:271:DDI TC2/PHY TC2] <7>[ 14.865665] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:271:DDI TC2/PHY TC2] Using DDC pin 0xa (VBT) <7>[ 14.866162] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:275:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7>[ 14.866637] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port F/TC#3: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 14.867172] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:275:DDI TC3/PHY TC3] <6>[ 14.871701] intel-lpss 0000:00:19.1: enabling device (0000 -> 0002) <7>[ 14.889894] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC3/DDI TC3/PHY TC3: Too many retries, giving up. First error: -6 <7>[ 14.889911] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel <7>[ 14.911676] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC3/DDI TC3/PHY TC3: Too many retries, giving up. First error: -6 <7>[ 14.911755] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:284:DDI TC4/PHY TC4] Using AUX CH USBC4 (VBT) <7>[ 14.912386] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port G/TC#4: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 14.913112] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:284:DDI TC4/PHY TC4] <6>[ 14.931624] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <7>[ 14.935872] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC4/DDI TC4/PHY TC4: Too many retries, giving up. First error: -6 <7>[ 14.935897] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel <7>[ 14.957050] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC4/DDI TC4/PHY TC4: Too many retries, giving up. First error: -6 <7>[ 14.958407] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe A] hw state readout: enabled <7>[ 14.959308] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:131:pipe B] hw state readout: disabled <7>[ 14.960094] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:182:pipe C] hw state readout: disabled <7>[ 14.960808] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:233:pipe D] hw state readout: disabled <7>[ 14.961275] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: enabled, pipe A <7>[ 14.961582] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] hw state readout: disabled, pipe A <7>[ 14.961867] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] hw state readout: disabled, pipe A <7>[ 14.962156] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] hw state readout: disabled, pipe A <7>[ 14.962406] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] hw state readout: disabled, pipe A <7>[ 14.962658] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] hw state readout: disabled, pipe A <7>[ 14.962897] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] hw state readout: disabled, pipe B <7>[ 14.963151] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] hw state readout: disabled, pipe B <7>[ 14.963377] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] hw state readout: disabled, pipe B <7>[ 14.963599] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] hw state readout: disabled, pipe B <7>[ 14.963816] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] hw state readout: disabled, pipe B <7>[ 14.964047] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] hw state readout: disabled, pipe B <7>[ 14.964243] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] hw state readout: disabled, pipe C <7>[ 14.964440] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] hw state readout: disabled, pipe C <7>[ 14.964643] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] hw state readout: disabled, pipe C <7>[ 14.964827] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] hw state readout: disabled, pipe C <7>[ 14.965020] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] hw state readout: disabled, pipe C <7>[ 14.965203] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] hw state readout: disabled, pipe C <7>[ 14.965385] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] hw state readout: disabled, pipe D <7>[ 14.965564] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] hw state readout: disabled, pipe D <7>[ 14.965744] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] hw state readout: disabled, pipe D <7>[ 14.965911] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] hw state readout: disabled, pipe D <7>[ 14.966085] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] hw state readout: disabled, pipe D <7>[ 14.966247] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] hw state readout: disabled, pipe D <7>[ 14.967178] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 14.967404] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:235:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 14.967566] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:244:DDI B/PHY B] hw state readout: disabled, pipe A <7>[ 14.967705] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:246:DP-MST A] hw state readout: disabled, pipe A <7>[ 14.967842] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:247:DP-MST B] hw state readout: disabled, pipe B <7>[ 14.967991] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:248:DP-MST C] hw state readout: disabled, pipe C <7>[ 14.968114] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:249:DP-MST D] hw state readout: disabled, pipe D <7>[ 14.968300] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port D/TC#1: sanitize mode (disconnected) <7>[ 14.968436] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:262:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 14.968557] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:264:DP-MST A] hw state readout: disabled, pipe A <7>[ 14.968675] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:265:DP-MST B] hw state readout: disabled, pipe B <7>[ 14.968791] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:266:DP-MST C] hw state readout: disabled, pipe C <7>[ 14.968906] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:267:DP-MST D] hw state readout: disabled, pipe D <7>[ 14.969097] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port E/TC#2: sanitize mode (disconnected) <7>[ 14.969213] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:271:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 14.969336] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port F/TC#3: sanitize mode (disconnected) <7>[ 14.969453] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:275:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 14.969564] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:277:DP-MST A] hw state readout: disabled, pipe A <7>[ 14.969672] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:278:DP-MST B] hw state readout: disabled, pipe B <7>[ 14.969776] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:279:DP-MST C] hw state readout: disabled, pipe C <7>[ 14.969881] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:280:DP-MST D] hw state readout: disabled, pipe D <7>[ 14.970018] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port G/TC#4: sanitize mode (disconnected) <7>[ 14.970129] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:284:DDI TC4/PHY TC4] hw state readout: disabled, pipe A <7>[ 14.970230] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:286:DP-MST A] hw state readout: disabled, pipe A <7>[ 14.970321] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:287:DP-MST B] hw state readout: disabled, pipe B <7>[ 14.970410] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:288:DP-MST C] hw state readout: disabled, pipe C <7>[ 14.970497] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:289:DP-MST D] hw state readout: disabled, pipe D <7>[ 14.970712] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:236:eDP-1] hw state readout: enabled <7>[ 14.970828] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:245:DP-1] hw state readout: disabled <7>[ 14.970947] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:257:HDMI-A-1] hw state readout: disabled <7>[ 14.971056] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:263:DP-2] hw state readout: disabled <7>[ 14.971165] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:272:HDMI-A-2] hw state readout: disabled <7>[ 14.971273] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:276:DP-3] hw state readout: disabled <7>[ 14.971384] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:285:DP-4] hw state readout: disabled <7>[ 14.971537] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 256910 kHz <7>[ 14.971629] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] min_cdclk 0 kHz <7>[ 14.971719] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] min_cdclk 0 kHz <7>[ 14.971806] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] min_cdclk 0 kHz <7>[ 14.971893] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] min_cdclk 0 kHz <7>[ 14.971997] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] min_cdclk 0 kHz <7>[ 14.972086] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 2055280 num active planes 1 <7>[ 14.972207] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] min_cdclk 0 kHz <7>[ 14.972305] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] min_cdclk 0 kHz <7>[ 14.972399] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] min_cdclk 0 kHz <7>[ 14.972491] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] min_cdclk 0 kHz <7>[ 14.972580] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] min_cdclk 0 kHz <7>[ 14.972668] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] min_cdclk 0 kHz <7>[ 14.972755] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7>[ 14.972872] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] min_cdclk 0 kHz <7>[ 14.972987] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] min_cdclk 0 kHz <7>[ 14.973083] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] min_cdclk 0 kHz <7>[ 14.973175] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] min_cdclk 0 kHz <7>[ 14.973265] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] min_cdclk 0 kHz <7>[ 14.973355] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] min_cdclk 0 kHz <7>[ 14.973445] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7>[ 14.973561] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] min_cdclk 0 kHz <7>[ 14.973654] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] min_cdclk 0 kHz <7>[ 14.973745] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] min_cdclk 0 kHz <7>[ 14.973833] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] min_cdclk 0 kHz <7>[ 14.973927] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] min_cdclk 0 kHz <7>[ 14.974023] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] min_cdclk 0 kHz <7>[ 14.974113] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe D data rate 0 num active planes 0 <7>[ 14.974421] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [setup_hw_state] <7>[ 14.974538] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 14.974648] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 14.974754] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 14.974858] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 14.974983] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 14.975091] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 14.975195] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 623587, link_n: 524288, tu: 64 <7>[ 14.975299] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 14.975402] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7>[ 14.975503] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7>[ 14.975602] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: disabled, psr2: disabled, panel replay: disabled, selective fetch: disabled <7>[ 14.975702] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 14.975801] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 14.975900] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 14.976020] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 14.976121] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 14.976221] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 14.976322] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 14.976425] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 14.976528] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 14.976628] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 14.976727] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 14.976824] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 14.976935] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 14.977040] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000 <7>[ 14.977155] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 14.977264] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 14.977368] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 14.977471] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 14.977573] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 14.977673] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 14.977773] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 14.977873] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 14.977984] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 14.978088] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 14.978189] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 14.978289] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 14.978390] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:131:pipe B] enable: no [setup_hw_state] <7>[ 14.978493] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:182:pipe C] enable: no [setup_hw_state] <7>[ 14.978593] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:233:pipe D] enable: no [setup_hw_state] <7>[ 14.978902] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:80:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 14.979029] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:131:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 14.979133] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:182:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 14.979232] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:233:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 14.979508] i915 0000:00:02.0: [drm:skl_get_initial_plane_config [i915]] pipe A/plane 1A with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800 <7>[ 14.979611] i915 0000:00:02.0: [drm:intel_plane_disable_noatomic [i915]] Disabling [PLANE:31:plane 1A] on [CRTC:80:pipe A] <7>[ 14.989644] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [2048K, 832K) <7>[ 15.009483] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [1040K, 832K) <7>[ 15.009657] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000] <7>[ 15.009791] i915 0000:00:02.0: [drm:i915_gem_init [i915]] No clock gating settings or workarounds applied. <7>[ 15.009976] MCR Steering: L3BANK steering: group=0x0, instance=0x0 <7>[ 15.009979] MCR Steering: DSS steering: group=0x0, instance=0x0 <7>[ 15.009982] MCR Steering: INSTANCE 0 steering: group=0x0, instance=0x0 <7>[ 15.009993] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 4 GT workarounds on global <7>[ 15.011730] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 6 engine workarounds on rcs'0 <7>[ 15.011860] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 whitelist workarounds on rcs'0 <7>[ 15.011977] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 6 context workarounds on rcs'0 <7>[ 15.012661] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 engine workarounds on bcs'0 <7>[ 15.012768] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 context workarounds on bcs'0 <7>[ 15.013366] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 engine workarounds on ccs'0 <7>[ 15.013470] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 context workarounds on ccs'0 <7>[ 15.014622] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 15.014756] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 24 ext-regs. <7>[ 15.014884] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7>[ 15.030139] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xd104f <7>[ 15.030343] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x400000 <7>[ 15.030464] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4 <7>[ 15.030589] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7>[ 15.030712] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x9a4 <7>[ 15.030816] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x7d550008 <7>[ 15.030996] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7>[ 15.031288] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7>[ 15.031511] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7>[ 15.031745] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7>[ 15.031987] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7>[ 15.032204] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7>[ 15.032419] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7>[ 15.032630] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <6>[ 15.033609] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/mtl_guc_70.bin version 70.20.0 <7>[ 15.044056] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 9ms, freq = 1700MHz, before = 1400MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 15.045543] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6>[ 15.046952] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6>[ 15.046961] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <6>[ 15.047562] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled <7>[ 15.058182] MCR Steering: OADDRM steering: group=0x0, instance=0x0 <7>[ 15.058191] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 4 GT workarounds on global <7>[ 15.060023] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'0 <7>[ 15.060377] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'0 <7>[ 15.063040] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'2 <7>[ 15.063167] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'2 <7>[ 15.065090] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vecs'0 <7>[ 15.065185] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vecs'0 <7>[ 15.066658] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on other'6 <7>[ 15.066753] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on other'6 <7>[ 15.071913] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT1: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 15.072303] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT1: GUC: capture found 24 ext-regs. <7>[ 15.072465] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT1: GUC: Used 4 KB for temporary ADS regset <7>[ 15.092263] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 0] = 0xd0504f <7>[ 15.092416] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 1] = 0x600000 <7>[ 15.092520] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 2] = 0x4 <7>[ 15.092619] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 3] = 0x3 <7>[ 15.092715] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 4] = 0x220c <7>[ 15.092818] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 5] = 0x7d550008 <7>[ 15.092914] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 6] = 0x0 <7>[ 15.093019] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 7] = 0x0 <7>[ 15.093113] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 8] = 0x0 <7>[ 15.093203] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 9] = 0x0 <7>[ 15.093400] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[10] = 0x0 <7>[ 15.093493] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[11] = 0x0 <7>[ 15.093596] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[12] = 0x0 <7>[ 15.093685] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[13] = 0x0 <7>[ 15.093782] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT1: HuC: loaded by GSC = no <7>[ 15.096167] i915 0000:00:02.0: [drm:i915_gsc_proxy_component_bind [i915]] GT1: GSC proxy mei component bound <6>[ 15.096323] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops i915_gsc_proxy_component_ops [i915]) <6>[ 15.096897] i915 0000:00:02.0: [drm] GT1: GuC firmware i915/mtl_guc_70.bin version 70.20.0 <6>[ 15.096899] i915 0000:00:02.0: [drm] GT1: HuC firmware i915/mtl_huc_gsc.bin version 8.5.4 <7>[ 15.113028] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT1: GUC: init took 14ms, freq = 1100MHz, before = 1150MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 15.113380] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled <6>[ 15.121964] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for clear media <6>[ 15.122783] i915 0000:00:02.0: [drm] GT1: GUC: submission enabled <6>[ 15.122787] i915 0000:00:02.0: [drm] GT1: GUC: SLPC enabled <6>[ 15.123046] i915 0000:00:02.0: [drm] GT1: GUC: RC enabled <7>[ 15.130011] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7>[ 15.130120] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7>[ 15.130207] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7>[ 15.130291] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'2 to vcs1 <7>[ 15.130373] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7>[ 15.130451] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed ccs'0 to ccs0 <7>[ 15.130526] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed other'6 to other0 <7>[ 15.130725] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 15.130966] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 15.131107] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 15.131253] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:236:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 15.131390] i915 0000:00:02.0: [drm:intel_dp_compute_config_link_bpp_limits [i915]] [ENCODER:235:DDI A/PHY A][CRTC:80:pipe A] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 max link_bpp 30.0000 <7>[ 15.131493] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30 <7>[ 15.131589] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 1926825 available 2160000 <7>[ 15.131692] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 15.131815] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:235:DDI A/PHY A] [CRTC:80:pipe A] <7>[ 15.131933] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 623587/524288, found tu 64, data 7483046/8388608 link 498869/524288) <7>[ 15.132049] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 15.132158] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in port_clock (expected 432000, found 540000) <7>[ 15.132268] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7>[ 15.132391] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 15.132498] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 15.132630] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 2048) -> ( 0 - 0), size 2048 -> 0 <7>[ 15.132731] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95 <7>[ 15.132827] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 15.132913] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 2, 2, 2, 2, 2, 2, 0, 0, 1, 3, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 15.133013] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 49, 49, 49, 49, 49, 49, 0, 0, 7, 73, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 15.133097] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 15.133180] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 15.133263] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 15.133346] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 15.133431] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 15.133514] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 15.133597] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 15.133680] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 15.133761] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 15.133841] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 15.133927] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 15.134010] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 15.134091] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 15.134171] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 15.134250] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 15.134333] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 15.134413] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 15.134492] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 15.134570] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 15.134650] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 15.134730] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <6>[ 15.134839] i915 0000:00:02.0: [drm] Selective fetch area calculation failed in pipe A <7>[ 15.134842] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [modeset] <7>[ 15.135130] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 15.135235] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 15.135334] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 15.135429] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 15.135524] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 15.135617] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 15.135712] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 15.135806] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 15.135899] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7>[ 15.136102] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7>[ 15.136312] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, psr2: enabled, panel replay: disabled, selective fetch: enabled <7>[ 15.136500] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 15.136675] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 15.136845] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0 <7>[ 15.136848] i915 0000:00:02.0: pixelformat: RGB <7>[ 15.136850] i915 0000:00:02.0: colorimetry: sRGB <7>[ 15.136852] i915 0000:00:02.0: bpc: 0 <7>[ 15.136854] i915 0000:00:02.0: dynamic range: VESA range <7>[ 15.136857] i915 0000:00:02.0: content type: Not defined <7>[ 15.136859] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 15.137124] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 15.137545] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 15.137945] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 15.138310] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 15.138662] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 15.139035] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 15.139421] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 15.139760] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 15.140133] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 15.140469] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 15.140802] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x83d60, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 15.141188] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 15.141520] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 15.141839] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 15.142217] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 15.142335] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 15.142441] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 15.142542] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 15.142655] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 15.142780] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 15.142875] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 15.142980] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 15.143075] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 15.143169] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no <7>[ 15.143263] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7>[ 15.143357] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7>[ 15.143451] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7>[ 15.143544] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7>[ 15.143637] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7>[ 15.143969] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <6>[ 15.278757] i915 0000:00:02.0: [drm] GT1: Loaded GSC firmware i915/mtl_gsc_1.bin (cv1.0, r102.0.0.1655, svn 1) <6>[ 15.299352] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for all workloads <7>[ 15.348056] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:236:eDP-1] set backlight PWM = 0 <7>[ 15.348758] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7>[ 15.352372] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turn panel power off <7>[ 15.352660] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 15.352962] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 15.405183] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 15.406107] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7>[ 15.406879] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0xffff0072 0x13421c72) <7>[ 15.407210] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI A/PHY A] <7>[ 15.407468] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:244:DDI B/PHY B] <7>[ 15.407720] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:246:DP-MST A] <7>[ 15.407969] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DP-MST B] <7>[ 15.408164] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:248:DP-MST C] <7>[ 15.408355] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST D] <7>[ 15.408545] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:262:DDI TC1/PHY TC1] <7>[ 15.408737] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:264:DP-MST A] <7>[ 15.408937] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST B] <7>[ 15.409117] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST C] <7>[ 15.409299] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST D] <7>[ 15.409484] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DDI TC2/PHY TC2] <7>[ 15.409654] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DDI TC3/PHY TC3] <7>[ 15.409805] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST A] <7>[ 15.409975] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:278:DP-MST B] <7>[ 15.410128] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST C] <7>[ 15.410286] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST D] <7>[ 15.410434] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DDI TC4/PHY TC4] <7>[ 15.410581] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:286:DP-MST A] <7>[ 15.410731] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:287:DP-MST B] <7>[ 15.410866] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:288:DP-MST C] <7>[ 15.411006] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DP-MST D] <7>[ 15.411172] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 15.411474] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 15.413017] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turn panel power on <7>[ 15.413234] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power cycle <7>[ 15.747424] i915 0000:00:02.0: [drm:gsc_work [i915]] GT1: GSC Proxy initialized <7>[ 16.020397] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7>[ 16.020876] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 16.021344] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 16.021787] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 16.222971] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 16.225752] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on <7>[ 16.226263] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 16.230277] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 16.231730] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 16.233699] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07 <7>[ 16.235994] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 16.237294] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 16.239639] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 16.240031] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7>[ 16.242995] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 16.243448] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7>[ 16.244691] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7>[ 16.245651] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7>[ 16.246049] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7>[ 16.246434] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:236:eDP-1] set backlight PWM = 192000 <7>[ 16.256694] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 16.257568] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:eDP-1] <7>[ 16.258178] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7>[ 16.260990] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 16.262445] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0x71 0x13421c72) <7>[ 16.263813] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [PLANE:31:plane 1A] no fb, skipping <7>[ 16.264162] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:131:pipe B] not active, skipping <7>[ 16.264468] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:182:pipe C] not active, skipping <7>[ 16.264746] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:233:pipe D] not active, skipping <7>[ 16.265027] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7>[ 16.265318] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 16.281360] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:236:eDP-1] backlight device intel_backlight registered <7>[ 16.281981] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 16.283494] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:236:eDP-1] generating connector hotplug event <7>[ 16.284222] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7>[ 16.285321] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:245:DP-1] generating connector hotplug event <7>[ 16.285859] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:257:HDMI-A-1] generating connector hotplug event <7>[ 16.286516] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-2 <7>[ 16.288096] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:263:DP-2] generating connector hotplug event <7>[ 16.288656] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:272:HDMI-A-2] generating connector hotplug event <7>[ 16.289249] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 16.290564] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:276:DP-3] generating connector hotplug event <7>[ 16.291139] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY TC4 bus for card0-DP-4 <7>[ 16.292150] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:285:DP-4] generating connector hotplug event <6>[ 16.292208] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0 <7>[ 16.296129] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 7 outputs detected <6>[ 16.318060] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 16.320699] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 <7>[ 16.321795] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <6>[ 16.321888] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <7>[ 16.321934] i915 0000:00:02.0: [drm:intel_audio_init [i915]] aud_ts_cdclk set to M=60, N=768 <7>[ 16.322374] i915 display info: display version: 14 <7>[ 16.322376] i915 display info: cursor_needs_physical: no <7>[ 16.322377] i915 display info: has_cdclk_crawl: yes <7>[ 16.322378] i915 display info: has_cdclk_squash: yes <7>[ 16.322379] i915 display info: has_ddi: yes <7>[ 16.322380] i915 display info: has_dp_mst: yes <7>[ 16.322381] i915 display info: has_dsb: yes <7>[ 16.322381] i915 display info: has_fpga_dbg: yes <7>[ 16.322382] i915 display info: has_gmch: no <7>[ 16.322383] i915 display info: has_hotplug: yes <7>[ 16.322384] i915 display info: has_hti: no <7>[ 16.322385] i915 display info: has_ipc: yes <7>[ 16.322386] i915 display info: has_overlay: no <7>[ 16.322386] i915 display info: has_psr: yes <7>[ 16.322387] i915 display info: has_psr_hw_tracking: no <7>[ 16.322388] i915 display info: overlay_needs_physical: no <7>[ 16.322389] i915 display info: supports_tv: no <7>[ 16.322390] i915 display info: has_hdcp: yes <7>[ 16.322391] i915 display info: has_dmc: yes <7>[ 16.322392] i915 display info: has_dsc: yes <7>[ 16.322542] [drm:drm_client_modeset_probe] <7>[ 16.322967] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] <7>[ 16.323004] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 16.324548] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7>[ 16.324696] i915 device info: pciid=0x7d55 rev=0x08 platform=METEORLAKE (subplatform=0x0) gen=12 <7>[ 16.324699] i915 device info: graphics version: 12.71 <7>[ 16.324700] i915 device info: media version: 13 <7>[ 16.324702] i915 device info: graphics stepping: B0 <7>[ 16.324703] i915 device info: media stepping: C0 <7>[ 16.324704] i915 device info: display stepping: C0 <7>[ 16.324705] i915 device info: base die stepping: ** <7>[ 16.324706] i915 device info: gt: 0 <7>[ 16.324707] i915 device info: memory-regions: 0x41 <7>[ 16.324708] i915 device info: page-sizes: 0x211000 <7>[ 16.324709] i915 device info: platform: METEORLAKE <7>[ 16.324711] i915 device info: ppgtt-size: 48 <7>[ 16.324712] i915 device info: ppgtt-type: 2 <7>[ 16.324713] i915 device info: dma_mask_size: 46 <7>[ 16.324714] i915 device info: is_mobile: no <7>[ 16.324715] i915 device info: is_lp: no <7>[ 16.324716] i915 device info: require_force_probe: no <7>[ 16.324718] i915 device info: is_dgfx: no <7>[ 16.324719] i915 device info: has_64bit_reloc: yes <7>[ 16.324720] i915 device info: has_64k_pages: no <7>[ 16.324721] i915 device info: gpu_reset_clobbers_display: no <7>[ 16.324722] i915 device info: has_reset_engine: yes <7>[ 16.324723] i915 device info: has_3d_pipeline: yes <7>[ 16.324724] i915 device info: has_flat_ccs: no <7>[ 16.324725] i915 device info: has_global_mocs: yes <7>[ 16.324726] i915 device info: has_gmd_id: yes <7>[ 16.324727] i915 device info: has_gt_uc: yes <7>[ 16.324728] i915 device info: has_heci_pxp: no <7>[ 16.324730] i915 device info: has_heci_gscfi: no <7>[ 16.324731] i915 device info: has_guc_deprivilege: yes <7>[ 16.324732] i915 device info: has_guc_tlb_invalidation: yes <7>[ 16.324733] i915 device info: has_l3_ccs_read: no <7>[ 16.324734] i915 device info: has_l3_dpf: no <7>[ 16.324735] i915 device info: has_llc: no <7>[ 16.324737] i915 device info: has_logical_ring_contexts: yes <7>[ 16.324738] i915 device info: has_logical_ring_elsq: yes <7>[ 16.324739] i915 device info: has_media_ratio_mode: no <7>[ 16.324740] i915 device info: has_mslice_steering: no <7>[ 16.324741] i915 device info: has_oa_bpc_reporting: yes <7>[ 16.324743] i915 device info: has_oa_slice_contrib_limits: yes <7>[ 16.324744] i915 device info: has_oam: yes <7>[ 16.324745] i915 device info: has_one_eu_per_fuse_bit: no <7>[ 16.324746] i915 device info: has_pxp: yes <7>[ 16.324747] i915 device info: has_rc6: yes <7>[ 16.324748] i915 device info: has_rc6p: no <7>[ 16.324749] i915 device info: has_rps: yes <7>[ 16.324750] i915 device info: has_runtime_pm: yes <7>[ 16.324751] i915 device info: has_snoop: yes <7>[ 16.324752] i915 device info: has_coherent_ggtt: no <7>[ 16.324754] i915 device info: tuning_thread_rr_after_dep: no <7>[ 16.324755] i915 device info: unfenced_needs_alignment: no <7>[ 16.324756] i915 device info: hws_needs_physical: no <7>[ 16.324757] i915 device info: has_pooled_eu: no <7>[ 16.324758] i915 device info: rawclk rate: 38400 kHz <7>[ 16.324759] i915 device info: iommu: enabled <7>[ 16.324761] i915 device info: available engines: 400003 <7>[ 16.324762] i915 device info: subslice total: 8 <7>[ 16.324763] i915 device info: geometry dss mask=00000000,000000ff <7>[ 16.324765] i915 device info: compute dss mask=00000000,000000ff <7>[ 16.324766] i915 device info: EU total: 128 <7>[ 16.324767] i915 device info: EU per subslice: 16 <7>[ 16.324769] i915 device info: has slice power gating: no <7>[ 16.324770] i915 device info: has subslice power gating: no <7>[ 16.324771] i915 device info: has EU power gating: no <7>[ 16.324772] i915 device info: available engines: 4041400 <7>[ 16.324773] i915 device info: subslice total: 8 <7>[ 16.324774] i915 device info: geometry dss mask=00000000,0000ff00 <7>[ 16.324775] i915 device info: compute dss mask=00000000,0000ff00 <7>[ 16.324776] i915 device info: EU total: 128 <7>[ 16.324777] i915 device info: EU per subslice: 16 <7>[ 16.324779] i915 device info: has slice power gating: no <7>[ 16.324780] i915 device info: has subslice power gating: no <7>[ 16.324781] i915 device info: has EU power gating: no <6>[ 16.324782] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6>[ 16.324784] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6>[ 16.324785] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7>[ 16.324935] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 16.326090] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 16.326426] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 16.326757] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 16.327111] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 16.327603] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 16.327617] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 16.327627] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 16.327686] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 16.328033] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 16.329301] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 16.329649] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 16.330954] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] status updated from unknown to connected <7>[ 16.331391] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes : <7>[ 16.331405] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 16.331421] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1] <7>[ 16.331433] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 16.332042] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1] status updated from unknown to disconnected <7>[ 16.332054] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1] disconnected <7>[ 16.332060] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] <7>[ 16.332065] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 16.332281] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] status updated from unknown to disconnected <7>[ 16.332289] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 16.332293] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:DP-2] <7>[ 16.332297] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 16.332813] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:DP-2] status updated from unknown to disconnected <7>[ 16.332821] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:DP-2] disconnected <7>[ 16.332824] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:272:HDMI-A-2] <7>[ 16.332828] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 16.333072] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:272:HDMI-A-2] status updated from unknown to disconnected <7>[ 16.333079] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 16.333082] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:276:DP-3] <7>[ 16.333086] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 16.333290] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:276:DP-3] status updated from unknown to disconnected <7>[ 16.333305] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:276:DP-3] disconnected <7>[ 16.333309] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:285:DP-4] <7>[ 16.333313] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 16.333508] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:285:DP-4] status updated from unknown to disconnected <7>[ 16.333514] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:285:DP-4] disconnected <7>[ 16.333518] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 16.333521] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 16.333523] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 16.333525] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 16.333528] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 16.333530] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 16.333532] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 16.333605] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 16.333617] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 16.333620] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 16.333622] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 16.333625] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 16.333641] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 16.333689] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7>[ 16.333719] i915 0000:00:02.0: [drm:intelfb_create [i915]] no BIOS fb, allocating a new one <6>[ 16.334076] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) <7>[ 16.335605] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 16.341136] i915 0000:00:02.0: [drm:intelfb_create [i915]] allocated 2880x1800 fb: 0x01e00000 <6>[ 16.342244] fbcon: i915drmfb (fb0) is primary device <7>[ 16.343139] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:236:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 16.343270] i915 0000:00:02.0: [drm:intel_dp_compute_config_link_bpp_limits [i915]] [ENCODER:235:DDI A/PHY A][CRTC:80:pipe A] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 max link_bpp 30.0000 <7>[ 16.343373] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30 <7>[ 16.343466] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 1926825 available 2160000 <7>[ 16.343562] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 16.343668] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:235:DDI A/PHY A] [CRTC:80:pipe A] <7>[ 16.343794] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001 <7>[ 16.343895] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 16.344005] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 <7>[ 16.344094] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 <7>[ 16.344180] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 <7>[ 16.344266] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 2055280 num active planes 1 <7>[ 16.344380] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200 <7>[ 16.344482] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 16.344579] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 16.344675] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 16.344773] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159 <7>[ 16.344880] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (40143 kHz) > old min cdclk (0 kHz) <7>[ 16.345003] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [fastset] <7>[ 16.345105] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 16.345204] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 16.345300] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 16.345398] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 16.345497] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 16.345594] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 16.345690] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 16.345786] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 16.345881] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7>[ 16.345992] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7>[ 16.346087] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, psr2: enabled, panel replay: disabled, selective fetch: enabled <7>[ 16.346184] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 16.346279] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 16.346374] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0 <7>[ 16.346375] i915 0000:00:02.0: pixelformat: RGB <7>[ 16.346376] i915 0000:00:02.0: colorimetry: sRGB <7>[ 16.346377] i915 0000:00:02.0: bpc: 0 <7>[ 16.346378] i915 0000:00:02.0: dynamic range: VESA range <7>[ 16.346379] i915 0000:00:02.0: content type: Not defined <7>[ 16.346380] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 16.346474] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 16.346567] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 16.346659] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 16.346752] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 16.346847] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 16.346950] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 16.347044] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 16.347137] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 16.347229] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 16.347319] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 16.347412] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x83d60, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 16.347520] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 16.347615] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 16.347708] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 16.347800] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 16.347892] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 16.348010] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 16.348104] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 16.348197] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 16.348288] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 16.348379] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 16.348470] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 16.348560] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 16.348653] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:237] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 16.348747] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 16.348838] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 16.348938] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7>[ 16.349030] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7>[ 16.349122] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7>[ 16.349215] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7>[ 16.349307] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7>[ 16.349555] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0x2000071 0x13421c72) <7>[ 16.349683] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI A/PHY A] <7>[ 16.349783] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:244:DDI B/PHY B] <7>[ 16.349878] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:246:DP-MST A] <7>[ 16.349981] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DP-MST B] <7>[ 16.350071] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:248:DP-MST C] <7>[ 16.350160] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST D] <7>[ 16.350247] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:262:DDI TC1/PHY TC1] <7>[ 16.350334] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:264:DP-MST A] <7>[ 16.350420] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST B] <7>[ 16.350508] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST C] <7>[ 16.350596] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST D] <7>[ 16.350682] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DDI TC2/PHY TC2] <7>[ 16.350767] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DDI TC3/PHY TC3] <7>[ 16.350851] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST A] <7>[ 16.350943] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:278:DP-MST B] <7>[ 16.351028] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST C] <7>[ 16.351113] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST D] <7>[ 16.351195] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DDI TC4/PHY TC4] <7>[ 16.351276] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:286:DP-MST A] <7>[ 16.351358] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:287:DP-MST B] <7>[ 16.351442] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:288:DP-MST C] <7>[ 16.351525] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DP-MST D] <7>[ 16.356660] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2 <7>[ 16.358316] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:eDP-1] <7>[ 16.358511] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7>[ 16.360689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B <7>[ 16.361009] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C <7>[ 16.361295] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D <6>[ 16.361907] Console: switching to colour frame buffer device 360x112 <6>[ 16.369367] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7>[ 16.389145] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 16.389558] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 16.389956] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 16.390355] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0] <7>[ 16.390425] [drm:drm_client_modeset_probe] <7>[ 16.390312] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 16.390798] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] <7>[ 16.390662] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 16.390840] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 16.391028] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 16.391380] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 16.391731] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 16.392156] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 16.392505] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 16.392704] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 16.392843] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 16.393196] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 16.393555] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 16.393905] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 16.393947] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 16.394263] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 16.394300] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 16.394564] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 16.394642] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 16.394862] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 16.394995] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 16.395383] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 16.395397] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 16.395406] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 16.395350] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 16.395459] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 16.395719] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 16.395773] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 16.396127] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 16.396531] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 16.396948] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 16.397126] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 16.397336] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 16.397430] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 16.397705] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 16.398214] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 16.398727] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes : <7>[ 16.398753] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 16.398766] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1] <7>[ 16.398737] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 16.398775] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 16.399093] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 16.399279] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1] disconnected <7>[ 16.399288] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] <7>[ 16.399296] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 16.399384] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 16.399673] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 16.399681] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:DP-2] <7>[ 16.399658] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 16.399688] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 16.399942] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 16.400200] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:DP-2] disconnected <7>[ 16.400207] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:272:HDMI-A-2] <7>[ 16.400213] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 16.400223] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 16.400635] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 16.400642] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:276:DP-3] <7>[ 16.400505] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 16.400649] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 16.400783] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 16.401005] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:276:DP-3] disconnected <7>[ 16.401010] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:285:DP-4] <7>[ 16.401016] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 16.401070] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 16.401329] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:285:DP-4] disconnected <7>[ 16.401335] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 16.401341] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 16.401344] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 16.401347] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 16.401349] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 16.401352] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 16.401355] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 16.401333] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 16.401473] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 16.401492] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 16.401496] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 16.401499] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 16.401502] [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 16.401543] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 16.401594] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <6>[ 16.408720] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input4 <6>[ 16.410236] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5 <6>[ 16.410900] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 16.411528] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <7>[ 16.412936] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0] <7>[ 16.412942] [drm:drm_client_modeset_probe] <7>[ 16.412974] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] <7>[ 16.412979] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 16.414598] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 16.415577] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 16.415771] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 16.415982] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 16.416174] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 16.416372] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 16.416379] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 16.416383] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 16.416401] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 16.416557] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 16.417589] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 16.417751] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 16.418639] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes : <7>[ 16.418710] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 16.418715] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1] <7>[ 16.418718] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 16.418848] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1] disconnected <7>[ 16.418851] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] <7>[ 16.418853] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 16.419088] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 16.419091] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:DP-2] <7>[ 16.419095] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 16.419246] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:DP-2] disconnected <7>[ 16.419249] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:272:HDMI-A-2] <7>[ 16.419253] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 16.419404] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 16.419407] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:276:DP-3] <7>[ 16.419410] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 16.419552] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:276:DP-3] disconnected <7>[ 16.419554] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:285:DP-4] <7>[ 16.419557] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 16.419700] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:285:DP-4] disconnected <7>[ 16.419702] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 16.419705] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 16.419707] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 16.419709] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 16.419711] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 16.419713] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 16.419714] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 16.419733] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 16.419740] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 16.419743] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 16.419745] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 16.419747] [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 16.419756] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 16.478248] i915 0000:00:02.0: [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=192000/192000 <7>[ 16.478404] i915 0000:00:02.0: [drm:intel_panel_actually_set_backlight [i915]] [CONNECTOR:236:eDP-1] set backlight level = 192000 <6>[ 17.351043] r8152 4-1:1.0 enxe2015072f13a: carrier on <7>[ 19.477430] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD off <7>[ 19.478076] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067 <7>[ 19.880039] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7>[ 19.880698] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 19.881119] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 19.881468] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <6>[ 20.502564] systemd-udevd (273) used greatest stack depth: 11416 bytes left <6>[ 20.512729] systemd-udevd (296) used greatest stack depth: 11032 bytes left <7>[ 21.835741] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 21.835978] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7>[ 21.856993] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 21.857621] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 21.857991] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <5>[ 35.656266] systemd-journald[218]: File /var/log/journal/9a8a5729dd38de7a803effd961f12914/user-1001.journal corrupted or uncleanly shut down, renaming and replacing. <5>[ 35.680207] systemd-journald[218]: Failed to set ACL on /var/log/journal/9a8a5729dd38de7a803effd961f12914/user-1001.journal, ignoring: Operation not supported <6>[ 35.874888] fuse: init (API version 7.39)