Results for igt@kms_pm_rpm@basic-rte

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Duration 11.59 seconds
Igt-Version 
IGT-Version: 1.28-gca4607939 (x86_64) (Linux: 6.8.0-rc6-linus-v6.8-rc6-gd206a76d7d27+ x86_64)
Out 
Using IGT_SRANDOM=1708904568 for randomisation
Starting subtest: basic-rte
Opened device: /dev/dri/card0
Runtime PM support: 1
PC8 residency support: 0
DMC: fw loaded: yes
i915_runtime_pm_status:
Runtime power status: enabled
GPU idle: yes
IRQs disabled: no
Usage count: 1
PCI device power state: D0 [0]
ref_tracker: 0000:00:02.0@ffff8881121eb4b0 has 1/1 users at
     track_intel_runtime_pm_wakeref.part.0+0x30/0x60 [i915]
     __intel_display_power_put_async+0x3d/0x160 [i915]
     intel_dp_aux_xfer+0x4c9/0x6d0 [i915]
     intel_dp_aux_transfer+0x1dc/0x2a0 [i915]
     drm_dp_dpcd_access+0x6d/0x130 [drm_display_helper]
     drm_dp_dpcd_read+0xeb/0x100 [drm_display_helper]
     drm_dp_read_sink_count+0x2c/0x80 [drm_display_helper]
     intel_dp_get_dpcd+0x9c/0xc0 [i915]
     intel_dp_detect+0xe4/0x680 [i915]
     drm_helper_probe_detect_ctx+0x45/0x100
     intel_hotplug_detect_connector+0x3e/0x100 [i915]
     i915_hpd_poll_init_work+0x178/0x220 [i915]
     process_scheduled_works+0x2de/0x530
     worker_thread+0x18c/0x350
     kthread+0x100/0x130
     ret_from_fork+0x2f/0x50
Subtest basic-rte: SUCCESS (11.587s)
i915_runtime_pm_status:
Runtime power status: enabled
GPU idle: yes
IRQs disabled: no
Usage count: 1
PCI device power state: D0 [0]
ref_tracker: 0000:00:02.0@ffff8881121eb4b0 has 1/1 users at
     track_intel_runtime_pm_wakeref.part.0+0x30/0x60 [i915]
     __intel_display_power_put_async+0x3d/0x160 [i915]
     __gt_park+0x154/0x210 [i915]
     ____intel_wakeref_put_last+0x20/0x80 [i915]
     intel_gt_pm_debugfs_forcewake_user_release+0x76/0x80 [i915]
     i915_forcewake_release+0x1d/0x40 [i915]
     full_proxy_release+0x3c/0xa0
     __fput+0xa4/0x2d0
     __x64_sys_close+0x39/0x80
     do_syscall_64+0x72/0x140
     entry_SYSCALL_64_after_hwframe+0x6e/0x76
Err 
Starting subtest: basic-rte
Subtest basic-rte: SUCCESS (11.587s)
Dmesg
<6> [95.553539] Console: switching to colour dummy device 80x25
<6> [95.553594] [IGT] kms_pm_rpm: executing
<6> [95.561638] [IGT] kms_pm_rpm: starting subtest basic-rte
<7> [95.561712] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [95.566374] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]
<7> [95.566381] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [95.566558] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected
<7> [95.567016] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]
<7> [95.567021] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [95.568202] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [95.569369] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [95.570045] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected
<7> [95.570474] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]
<7> [95.570479] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [95.571040] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [95.571244] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [95.571686] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [95.571897] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.571902] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [95.572016] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [95.576187] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.576192] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [95.576318] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected
<7> [95.576654] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]
<7> [95.576661] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [95.576901] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected
<7> [95.576918] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]
<7> [95.576922] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [95.578041] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [95.579192] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [95.580021] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected
<7> [95.580041] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]
<7> [95.580045] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [95.580469] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [95.580588] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [95.580949] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [95.581104] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.581108] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [95.581236] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [95.585358] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.585363] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [95.585490] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected
<7> [95.585518] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]
<7> [95.585522] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [95.585702] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected
<7> [95.585795] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]
<7> [95.585801] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [95.586952] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [95.587934] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [95.588715] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected
<7> [95.588777] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]
<7> [95.588781] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [95.589241] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [95.589361] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [95.589774] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [95.589966] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.589970] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [95.590084] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [95.594197] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.594203] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [95.594350] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected
<7> [95.793849] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [95.794436] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [95.794979] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [95.795469] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [95.796452] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [106.632726] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [106.641411] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [106.666034] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [106.670732] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [106.670908] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [106.671156] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [106.671735] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [106.671831] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]
<7> [106.672297] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [106.672832] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [106.673398] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [106.674737] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [106.675548] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [106.676392] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [106.676949] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [106.677146] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [106.677605] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [106.677854] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [106.677863] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [106.678053] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [106.682359] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [106.682380] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [106.682746] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]
<7> [106.682861] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]
<7> [106.777830] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [106.795789] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [106.796021] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [106.796219] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [106.796891] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [106.797177] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [106.801520] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [106.883832] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]
<7> [106.896232] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [106.905308] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [106.906390] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [106.907081] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [106.907952] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [106.908946] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]
<7> [106.908917] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [106.909545] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [106.910191] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [106.911846] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [106.913204] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [106.914119] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [106.914697] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [106.914903] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [106.915375] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [106.915626] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [106.915634] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [106.915862] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [106.920449] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [106.920456] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [106.920845] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]
<7> [107.033802] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [107.034108] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [107.034359] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [107.034603] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [107.035337] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [107.035719] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [107.040005] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [107.134029] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [107.145130] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [107.145509] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [107.146062] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [107.146925] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [107.147808] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [107.148515] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<6> [107.149030] [IGT] kms_pm_rpm: finished subtest basic-rte, SUCCESS
<7> [107.149126] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]
<7> [107.149300] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [107.151051] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [107.152195] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [107.153045] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [107.153495] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [107.153612] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [107.154012] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [107.154168] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [107.154173] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [107.154289] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [107.158409] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [107.158414] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [107.158715] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]
<7> [107.158832] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]
<7> [107.353846] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [107.354391] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [107.354911] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [107.355500] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [107.356525] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [107.357233] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [107.365598] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [107.472855] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [107.483456] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [107.484105] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [107.484588] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [107.485633] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [107.487452] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<6> [107.488092] [IGT] kms_pm_rpm: exiting, ret=0
<7> [107.487938] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [107.488427] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [107.489949] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [107.491250] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [107.491925] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [107.492464] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [107.492690] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [107.493160] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [107.493397] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [107.493404] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [107.493601] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [107.497854] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [107.497858] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<6> [107.498262] Console: switching to colour frame buffer device 128x48
Created at 2024-02-26 01:27:12