Results for igt@kms_pm_rpm@basic-pci-d3-state

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Duration 0.26 seconds
Igt-Version 
IGT-Version: 1.28-gca4607939 (x86_64) (Linux: 6.8.0-rc6-linus-v6.8-rc6-gd206a76d7d27+ x86_64)
Out 
Using IGT_SRANDOM=1708904556 for randomisation
Opened device: /dev/dri/card0
Runtime PM support: 1
PC8 residency support: 0
DMC: fw loaded: yes
i915_runtime_pm_status:
Runtime power status: enabled
GPU idle: yes
IRQs disabled: no
Usage count: 2
PCI device power state: D0 [0]
ref_tracker: 0000:00:02.0@ffff8881121eb4b0 has 1/2 users at
     track_intel_runtime_pm_wakeref.part.0+0x30/0x60 [i915]
     __intel_display_power_put_async+0x3d/0x160 [i915]
     intel_atomic_commit_tail+0xaef/0xf80 [i915]
     intel_atomic_commit+0x321/0x370 [i915]
     drm_atomic_commit+0x95/0xc0
     drm_atomic_helper_set_config+0x77/0xc0
     drm_mode_setcrtc+0x1f7/0x740
     drm_ioctl_kernel+0xab/0x100
     drm_ioctl+0x223/0x430
     __x64_sys_ioctl+0x7c/0xb0
     do_syscall_64+0x72/0x140
     entry_SYSCALL_64_after_hwframe+0x6e/0x76

ref_tracker: 0000:00:02.0@ffff8881121eb4b0 has 1/2 users at
     track_intel_runtime_pm_wakeref.part.0+0x30/0x60 [i915]
     intel_display_power_get+0x24/0x70 [i915]
     i915_hpd_poll_init_work+0x129/0x220 [i915]
     process_scheduled_works+0x2de/0x530
     worker_thread+0x18c/0x350
     kthread+0x100/0x130
     ret_from_fork+0x2f/0x50
     ret_from_fork_asm+0x1b/0x30
Starting subtest: basic-pci-d3-state
Subtest basic-pci-d3-state: SUCCESS (0.259s)
Err 
Starting subtest: basic-pci-d3-state
Subtest basic-pci-d3-state: SUCCESS (0.259s)
Dmesg
<6> [83.881437] Console: switching to colour dummy device 80x25
<6> [83.881489] [IGT] kms_pm_rpm: executing
<7> [83.889585] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [83.893697] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]
<7> [83.893705] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [83.893879] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected
<7> [83.894413] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]
<7> [83.894418] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [83.895722] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [83.896706] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [83.897520] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected
<7> [83.898064] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]
<7> [83.898070] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [83.898529] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [83.898671] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [83.899089] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [83.899254] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [83.899259] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [83.899370] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [83.903673] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [83.903678] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [83.903802] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected
<7> [83.904098] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]
<7> [83.904103] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [83.904289] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected
<7> [83.904304] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]
<7> [83.904308] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [83.905591] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [83.906692] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [83.907490] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected
<7> [83.907508] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]
<7> [83.907512] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [83.907982] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [83.908095] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [83.908469] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [83.908619] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [83.908623] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [83.908774] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [83.912820] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [83.912825] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [83.912949] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected
<7> [83.912977] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]
<7> [83.912981] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [83.913137] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected
<7> [83.913189] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]
<7> [83.913193] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [83.914382] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [83.915536] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [83.916353] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected
<7> [83.916415] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]
<7> [83.916420] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [83.916851] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [83.916968] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [83.917346] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [83.917512] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [83.917516] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [83.917632] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [83.921844] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [83.921850] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [83.921976] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected
<7> [84.049795] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [84.050001] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [84.050160] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [84.050313] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [84.050916] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [94.970970] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [94.981209] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [95.005878] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [95.016602] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [95.017921] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]
<7> [95.018145] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.018611] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [95.019551] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [95.021401] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]
<7> [95.022118] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [95.022685] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]
<7> [95.023334] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [95.025065] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [95.027597] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [95.028463] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [95.029115] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [95.030072] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [95.030203] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [95.030594] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [95.030772] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.030777] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [95.030898] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [95.035135] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.035139] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [95.145719] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [95.145939] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [95.146108] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [95.146270] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [95.146904] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.147424] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [95.150736] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<6> [95.225841] [IGT] kms_pm_rpm: starting subtest basic-pci-d3-state
<7> [95.235475] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]
<7> [95.247511] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [95.253186] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [95.253402] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.253584] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [95.254102] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [95.254779] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]
<7> [95.254984] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [95.255202] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [95.255438] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [95.255679] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]
<7> [95.256722] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [95.257957] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [95.258739] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [95.259310] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [95.259527] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [95.260051] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [95.260211] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.260216] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [95.260336] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [95.264590] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.264596] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [95.377789] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [95.378047] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [95.378253] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [95.378474] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [95.379189] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [95.379811] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [95.383505] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [95.477608] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [95.482482] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [95.482696] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [95.482861] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [95.483318] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [95.484095] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [95.484301] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [95.484511] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<6> [95.485314] [IGT] kms_pm_rpm: finished subtest basic-pci-d3-state, SUCCESS
<7> [95.486006] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [95.487227] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [95.488099] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [95.488532] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [95.488670] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [95.489046] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [95.489208] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.489213] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [95.489334] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [95.493779] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [95.493784] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<6> [95.494417] [IGT] kms_pm_rpm: exiting, ret=0
<6> [95.495250] Console: switching to colour frame buffer device 128x48
Created at 2024-02-26 01:27:12