igt@i915_pm_rpm@module-reload on fi-kbl-x1275@linus-v6.8-rc6 Test details

Detail	Value
Duration	26.77 seconds
Igt-Version	IGT-Version: 1.28-gca4607939 (x86_64) (Linux: 6.8.0-rc6-linus-v6.8-rc6-gd206a76d7d27+ x86_64)
Out	Using IGT_SRANDOM=1708904620 for randomisation Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: 0000:00:02.0@ffff8881cfa3b4b0 has 1/1 users at track_intel_runtime_pm_wakeref.part.0+0x30/0x60 [i915] __intel_display_power_put_async+0x3d/0x160 [i915] intel_atomic_commit_tail+0xaef/0xf80 [i915] intel_atomic_commit+0x321/0x370 [i915] drm_atomic_commit+0x95/0xc0 drm_atomic_helper_set_config+0x77/0xc0 drm_mode_setcrtc+0x1f7/0x740 drm_ioctl_kernel+0xab/0x100 drm_ioctl+0x223/0x430 __x64_sys_ioctl+0x7c/0xb0 do_syscall_64+0x72/0x140 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Starting subtest: module-reload Reloading i915 with disable_display=1 mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: 0000:00:02.0@ffff88816304b4b0 has 1/1 users at track_intel_runtime_pm_wakeref.part.0+0x30/0x60 [i915] intel_display_power_get+0x24/0x70 [i915] i915_hpd_poll_init_work+0x129/0x220 [i915] process_scheduled_works+0x2de/0x530 worker_thread+0x18c/0x350 kthread+0x100/0x130 ret_from_fork+0x2f/0x50 ret_from_fork_asm+0x1b/0x30 Reloading i915 with mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: 0000:00:02.0@ffff88814a1334b0 has 1/1 users at track_intel_runtime_pm_wakeref.part.0+0x30/0x60 [i915] __intel_display_power_put_async+0x3d/0x160 [i915] intel_atomic_commit_tail+0xaef/0xf80 [i915] intel_atomic_commit+0x321/0x370 [i915] drm_atomic_commit+0x95/0xc0 drm_atomic_helper_set_config+0x77/0xc0 drm_mode_setcrtc+0x1f7/0x740 drm_ioctl_kernel+0xab/0x100 drm_ioctl+0x223/0x430 __x64_sys_ioctl+0x7c/0xb0 do_syscall_64+0x72/0x140 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Subtest module-reload: SUCCESS (26.774s)
Err	Starting subtest: module-reload Subtest module-reload: SUCCESS (26.774s)
Dmesg	<6> [147.282717] [IGT] i915_pm_rpm: executing <7> [147.286945] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [147.287610] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [147.287617] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [147.287921] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [147.287986] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [147.287991] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [147.288169] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [147.289606] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [147.290708] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [147.291526] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [147.291576] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [147.291581] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [147.292204] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [147.292323] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [147.292730] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [147.292899] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [147.292903] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [147.293047] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [147.297413] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [147.297418] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [147.297541] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [147.301179] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [147.301185] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [147.301347] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [147.301828] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [147.301833] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [147.302999] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [147.304137] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [147.304946] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [147.305363] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [147.305367] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [147.305845] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [147.305962] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [147.306347] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [147.306510] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [147.306514] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [147.306625] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [147.310994] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [147.310999] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [147.311119] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [147.311423] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [147.311429] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [147.311606] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [147.311622] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [147.311626] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [147.312972] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [147.314130] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [147.314957] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [147.314975] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [147.314980] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [147.315426] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [147.315554] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [147.315969] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [147.316167] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [147.316171] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [147.316282] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [147.320498] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [147.320503] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [147.320623] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [147.425783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [147.426013] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [147.426195] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [147.426370] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [147.427022] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [158.367070] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [158.377294] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [158.401845] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [158.411958] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [158.412711] [drm:drm_mode_setcrtc] [CRTC:51:pipe A] <7> [158.412935] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [158.413392] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [158.414308] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [158.415767] [drm:drm_mode_setcrtc] [CRTC:72:pipe B] <7> [158.415755] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [158.416464] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [158.417048] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [158.419554] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [158.420710] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [158.421402] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [158.422056] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [158.422176] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [158.422511] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [158.422712] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [158.422717] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [158.422844] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [158.427069] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [158.427074] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [158.427311] [drm:drm_mode_setcrtc] [CRTC:93:pipe C] <7> [158.537746] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [158.538049] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [158.538298] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [158.538541] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [158.539272] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [158.540271] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [158.545434] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [158.629004] [IGT] i915_pm_rpm: starting subtest module-reload <7> [158.729830] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [158.735319] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [158.735628] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [158.736090] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [158.736760] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [158.737437] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [158.737891] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [158.738128] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [158.738363] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [158.738594] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [158.738886] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [158.739224] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [158.740878] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [158.742024] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [158.742877] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [158.743324] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [158.743439] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [158.743830] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [158.743980] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [158.743986] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [158.744098] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [158.748418] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [158.748422] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [158.767938] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [158.808326] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <6> [159.037389] [IGT] Reloading i915 w/o display <7> [159.189085] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [159.189308] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [159.189484] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH <7> [159.189657] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [159.189870] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [159.190063] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz <7> [159.190609] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [159.190741] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [159.190873] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M <6> [159.190985] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [159.190989] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [159.191211] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [159.191225] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047 <7> [159.191367] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K <7> [159.191727] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018 <7> [159.191922] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [159.192067] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [159.192208] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [159.192348] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [159.196411] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [159.196571] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [159.196795] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [159.196976] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [159.197187] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [159.197299] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [159.197430] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [159.197533] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [159.197636] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [159.197754] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [159.197856] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [159.197957] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [159.198057] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [159.198157] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [159.198558] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [159.198739] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196 <7> [159.198899] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [159.199057] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [159.199214] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [159.199370] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [159.199527] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812) <7> [159.199691] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34) <7> [159.199846] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [159.200003] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [159.200167] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [159.200323] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [159.200475] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [159.200671] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [159.200896] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6 <7> [159.201078] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [159.201235] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [159.201391] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [159.201542] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [159.201703] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [159.201854] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [159.202005] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3 <7> [159.202156] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [159.202308] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3 <7> [159.202461] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [159.202625] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [159.202816] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [159.202985] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [159.203139] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [159.203637] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [159.203801] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [159.203977] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [159.204170] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [159.204325] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [159.204511] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [159.204724] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [159.204936] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [159.205091] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [159.205244] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [159.205396] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [159.205582] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <7> [159.205985] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [159.206407] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [159.206558] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [159.207112] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [159.207271] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [159.207423] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [159.207575] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [159.207697] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [159.207886] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <6> [159.208111] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [159.208035] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [159.208208] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [159.208360] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [159.208503] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [159.208658] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [159.208815] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [159.209938] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [159.210844] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [159.211066] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] Using AUX CH A (VBT) <7> [159.211303] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A] <7> [159.213691] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [159.213873] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [159.214041] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [159.214206] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static <7> [159.214375] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [159.214539] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [159.214719] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [159.214899] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [159.215087] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [159.215259] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0 <7> [159.215482] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1 <7> [159.215723] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0 <7> [159.215933] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [159.216072] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [159.216208] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [159.216343] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [159.216479] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [159.216742] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [159.217093] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on <7> [159.217260] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [159.217477] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [159.217631] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [159.217886] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [159.218044] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [159.436653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.447653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.458653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.469655] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.480652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.491652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.502653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.513654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.524652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.535652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.546653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.557654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.568653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.579653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.590653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.601653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.612652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.623652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.634654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.645654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.656652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.667653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.678653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.689653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.700652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.711652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.722653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.733654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.744653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.755652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.766653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.777654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [159.777866] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <6> [159.777879] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP <7> [159.777940] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off <7> [159.778145] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [159.778379] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] Using AUX CH B (VBT) <7> [159.778539] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B] <7> [159.789654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [159.800652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [159.811653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [159.822652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [159.833654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [159.844652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [159.855653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [159.866653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [159.877653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [159.888652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [159.899653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [159.910652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [159.921665] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [159.932652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [159.943653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [159.954652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [159.965653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [159.976652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [159.987654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [159.998652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.009659] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.020652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.031652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.042653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.053651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.064651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.075652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.086653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.097651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.108651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.119651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.130653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.130863] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX B/DDI B/PHY B: Too many retries, giving up. First error: -110 <7> [160.130876] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel <7> [160.141651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.152651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.163652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.174652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.185651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.196651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.207652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.218652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.229651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.240651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.251652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.262652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.273651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.284651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.295652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.306652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.317651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.328651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.339653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.350651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.361651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.372651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.383653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.394652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.405651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.416653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.427652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.438651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.449653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.460654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.471651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.482651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [160.482858] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX B/DDI B/PHY B: Too many retries, giving up. First error: -110 <7> [160.482870] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [160.483030] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DDI C/PHY C] Using AUX CH C (VBT) <7> [160.483188] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C] <7> [160.484258] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel <7> [160.485270] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [160.485425] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C] <7> [160.485569] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:106:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [160.485957] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [160.486171] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [160.486381] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [160.486544] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [160.486742] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [160.486925] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [160.487119] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [160.487289] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [160.487449] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [160.487608] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [160.487785] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [160.487952] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [160.488113] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [160.488258] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A <7> [160.488403] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B <7> [160.488549] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C <7> [160.488732] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A <7> [160.488883] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A <7> [160.489029] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B <7> [160.489175] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C <7> [160.489338] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [160.489507] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [160.489690] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [160.489862] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [160.490101] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled <7> [160.490277] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled <7> [160.490457] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled <7> [160.490684] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [160.490842] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [160.490987] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [160.491132] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [160.491288] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [160.491437] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [160.491584] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [160.491739] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [160.491908] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [160.492057] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [160.492203] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [160.492349] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [160.492551] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [160.492717] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [160.492883] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [160.493036] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [160.493191] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [160.493339] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [160.493482] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [160.493671] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [160.493829] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [160.493956] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [160.494100] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 6 GT workarounds on global <7> [160.496120] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [160.496268] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [160.496409] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 14 context workarounds on rcs'0 <7> [160.507429] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [160.507570] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [160.507752] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [160.507956] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [160.508355] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [160.508786] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [160.509002] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [160.509201] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [160.509399] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [160.509624] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [160.513954] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [160.514563] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event <7> [160.515004] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [160.515569] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event <7> [160.515877] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event <6> [160.515916] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0 <7> [160.517248] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected <6> [160.529517] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [160.531523] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 <7> [160.532325] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [160.533187] i915 display info: display version: 9 <7> [160.533191] i915 display info: cursor_needs_physical: no <7> [160.533193] i915 display info: has_cdclk_crawl: no <7> [160.533192] [drm:drm_client_modeset_probe] <7> [160.533196] i915 display info: has_cdclk_squash: no <7> [160.533199] i915 display info: has_ddi: yes <7> [160.533201] i915 display info: has_dp_mst: yes <7> [160.533204] i915 display info: has_dsb: no <7> [160.533206] i915 display info: has_fpga_dbg: yes <7> [160.533208] i915 display info: has_gmch: no <7> [160.533211] i915 display info: has_hotplug: yes <7> [160.533213] i915 display info: has_hti: no <7> [160.533215] i915 display info: has_ipc: yes <7> [160.533218] i915 display info: has_overlay: no <7> [160.533220] i915 display info: has_psr: yes <7> [160.533223] i915 display info: has_psr_hw_tracking: yes <7> [160.533225] i915 display info: overlay_needs_physical: no <7> [160.533228] i915 display info: supports_tv: no <7> [160.533230] i915 display info: has_hdcp: yes <7> [160.533233] i915 display info: has_dmc: yes <7> [160.533235] i915 display info: has_dsc: no <7> [160.533235] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [160.533244] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [160.533239] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [160.533510] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] status updated from unknown to disconnected <7> [160.533525] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [160.533533] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [160.533539] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [160.533535] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [160.533784] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] status updated from unknown to disconnected <7> [160.533796] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [160.533802] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [160.533784] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [160.533809] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [160.534036] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected <7> [160.534047] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [160.534053] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [160.534058] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [160.534062] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [160.534066] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [160.534084] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [160.534096] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [160.534116] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [160.534126] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [160.534029] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [160.534706] [drm:drm_client_modeset_probe] <7> [160.534743] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [160.534751] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [160.534744] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [160.534983] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [160.534989] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [160.534989] i915 device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9 <7> [160.534994] i915 device info: graphics version: 9 <7> [160.534996] i915 device info: media version: 9 <7> [160.534998] i915 device info: graphics stepping: F0 <7> [160.535001] i915 device info: media stepping: F0 <7> [160.535003] i915 device info: display stepping: C0 <7> [160.535006] i915 device info: base die stepping: <7> [160.535008] i915 device info: gt: 2 <7> [160.535010] i915 device info: memory-regions: 0x21 <7> [160.535013] i915 device info: page-sizes: 0x11000 <7> [160.535015] i915 device info: platform: KABYLAKE <7> [160.535017] i915 device info: ppgtt-size: 48 <7> [160.535020] i915 device info: ppgtt-type: 2 <7> [160.535022] i915 device info: dma_mask_size: 39 <7> [160.535024] i915 device info: is_mobile: no <7> [160.535027] i915 device info: is_lp: no <7> [160.535029] i915 device info: require_force_probe: no <7> [160.535031] i915 device info: is_dgfx: no <7> [160.535033] i915 device info: has_64bit_reloc: yes <7> [160.535036] i915 device info: has_64k_pages: no <7> [160.535038] i915 device info: gpu_reset_clobbers_display: no <7> [160.535040] i915 device info: has_reset_engine: yes <7> [160.535043] i915 device info: has_3d_pipeline: yes <7> [160.535045] i915 device info: has_flat_ccs: no <7> [160.535047] i915 device info: has_global_mocs: no <7> [160.535050] i915 device info: has_gmd_id: no <7> [160.535052] i915 device info: has_gt_uc: yes <7> [160.535054] i915 device info: has_heci_pxp: no <7> [160.535056] i915 device info: has_heci_gscfi: no <7> [160.535059] i915 device info: has_guc_deprivilege: no <7> [160.535061] i915 device info: has_guc_tlb_invalidation: no <7> [160.535063] i915 device info: has_l3_ccs_read: no <7> [160.535066] i915 device info: has_l3_dpf: no <7> [160.535068] i915 device info: has_llc: yes <7> [160.535070] i915 device info: has_logical_ring_contexts: yes <7> [160.535073] i915 device info: has_logical_ring_elsq: no <7> [160.535075] i915 device info: has_media_ratio_mode: no <7> [160.535077] i915 device info: has_mslice_steering: no <7> [160.535080] i915 device info: has_oa_bpc_reporting: no <7> [160.535082] i915 device info: has_oa_slice_contrib_limits: no <7> [160.535084] i915 device info: has_oam: no <7> [160.535087] i915 device info: has_one_eu_per_fuse_bit: no <7> [160.535089] i915 device info: has_pxp: no <7> [160.535091] i915 device info: has_rc6: yes <7> [160.535094] i915 device info: has_rc6p: no <7> [160.535096] i915 device info: has_rps: yes <7> [160.535098] i915 device info: has_runtime_pm: yes <7> [160.534999] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [160.535100] i915 device info: has_snoop: no <7> [160.535102] i915 device info: has_coherent_ggtt: yes <7> [160.535104] i915 device info: tuning_thread_rr_after_dep: no <7> [160.535106] i915 device info: unfenced_needs_alignment: no <7> [160.535108] i915 device info: hws_needs_physical: no <7> [160.535110] i915 device info: has_pooled_eu: no <7> [160.535112] i915 device info: rawclk rate: 24000 kHz <7> [160.535115] i915 device info: iommu: enabled <7> [160.535117] i915 device info: available engines: 40403 <7> [160.535119] i915 device info: slice total: 1, mask=0001 <7> [160.535122] i915 device info: subslice total: 3 <7> [160.535124] i915 device info: slice0: 3 subslices, mask=00000007 <7> [160.535126] i915 device info: slice1: 0 subslices, mask=00000000 <7> [160.535128] i915 device info: slice2: 0 subslices, mask=00000000 <7> [160.535131] i915 device info: EU total: 24 <7> [160.535133] i915 device info: EU per subslice: 8 <7> [160.535135] i915 device info: has slice power gating: no <7> [160.535137] i915 device info: has subslice power gating: no <7> [160.535139] i915 device info: has EU power gating: yes <6> [160.535141] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [160.535143] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [160.535145] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [160.535215] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [160.535221] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [160.535228] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [160.535458] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [160.535464] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [160.535469] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [160.535473] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [160.535477] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [160.535521] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [160.535532] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [160.535549] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [160.535558] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [160.539719] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [160.690356] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [160.691354] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [160.691877] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [160.692501] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [160.693484] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [171.589567] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [171.597723] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [171.622337] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [171.627304] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [171.627849] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [171.628348] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [171.628677] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [171.628968] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [171.629254] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [171.629869] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [171.633589] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [171.839751] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [171.848413] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [171.849442] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [171.849897] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [171.850044] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [171.850368] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [171.850735] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [171.850894] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [171.851787] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [171.852349] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [171.852537] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [171.852701] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [171.852867] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [171.869923] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [171.916246] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <6> [172.133417] [IGT] Reloading i915 as normal <7> [172.268019] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [172.268241] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [172.268411] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH <7> [172.268564] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [172.268926] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [172.269162] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz <7> [172.269913] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [172.270088] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [172.270256] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M <6> [172.270421] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [172.270426] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [172.270786] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [172.270809] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047 <7> [172.271055] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K <7> [172.271484] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018 <7> [172.271788] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [172.271994] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [172.272233] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [172.272434] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [172.276694] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [172.276870] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [172.277019] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [172.277167] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [172.277315] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [172.277484] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [172.277615] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [172.277737] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [172.277940] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [172.278053] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [172.278165] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [172.278276] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [172.278386] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [172.278498] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [172.279202] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [172.279462] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196 <7> [172.279769] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [172.279996] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [172.280214] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [172.280431] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [172.280675] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812) <7> [172.280911] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34) <7> [172.281128] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [172.281398] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [172.281629] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [172.281905] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [172.282135] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [172.282345] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [172.282556] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6 <7> [172.282844] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [172.283098] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [172.283350] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [172.283580] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [172.283850] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [172.284079] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [172.284291] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3 <7> [172.284499] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [172.284772] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3 <7> [172.285034] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [172.285260] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [172.285517] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [172.285846] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [172.286081] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [172.286771] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [172.287024] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [172.287272] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [172.287534] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [172.287811] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [172.288041] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [172.288266] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [172.288570] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [172.288803] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [172.289022] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [172.289241] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [172.289507] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <7> [172.290135] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [172.290386] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [172.290627] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [172.290610] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [172.290786] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [172.290852] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [172.290968] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [172.291112] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [172.291085] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [172.291255] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [172.291399] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [172.291541] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <6> [172.291664] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [172.291703] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [172.291863] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [172.292021] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [172.293144] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [172.294100] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [172.294320] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] Using AUX CH A (VBT) <7> [172.294484] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A] <7> [172.296705] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [172.296926] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [172.297114] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [172.297269] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static <7> [172.297427] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [172.297581] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [172.297803] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [172.297957] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [172.298110] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [172.298261] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0 <7> [172.298413] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1 <7> [172.298607] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0 <7> [172.298871] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [172.299010] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [172.299146] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [172.299281] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [172.299417] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [172.299621] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [172.299987] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on <7> [172.300151] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [172.300411] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [172.300633] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [172.300982] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [172.301153] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [172.516652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [172.527653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [172.538654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [172.549654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [172.560654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [172.571652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [172.582652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [172.593655] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [172.604652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [172.615652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [172.626653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [172.637655] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [172.648652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [172.659652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [172.670653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [172.681655] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [172.692652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [172.703652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [172.714653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [172.725654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [172.736653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [172.747652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [172.758653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [172.769654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [172.780652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [172.791653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [172.802652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [172.813654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [172.824652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [172.835653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [172.846652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [172.857654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [172.857869] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <6> [172.857882] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP <7> [172.857941] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off <7> [172.858146] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [172.858380] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] Using AUX CH B (VBT) <7> [172.858540] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B] <7> [172.869666] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [172.880652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [172.891654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [172.902652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [172.913654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [172.924652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [172.935653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [172.946653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [172.957654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [172.968653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [172.979653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [172.990652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.001667] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.012653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.023653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.034655] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.045652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.056653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.067656] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.078652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.089652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.100655] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.111652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.122652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.133654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.144653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.155653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.166654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.177652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.188654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.199654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.210653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.210863] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX B/DDI B/PHY B: Too many retries, giving up. First error: -110 <7> [173.210876] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel <7> [173.221652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.232654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.243651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.254651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.265652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.276654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.287652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.298652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.309651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.320654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.331652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.342651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.353652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.364654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.375651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.386651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.397652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.408654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.419651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.430653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.441652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.452653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.463652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.474653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.485652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.496652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.507652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.518654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.529652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.540651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.551651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.562653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [173.562866] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX B/DDI B/PHY B: Too many retries, giving up. First error: -110 <7> [173.562878] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [173.563041] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DDI C/PHY C] Using AUX CH C (VBT) <7> [173.563200] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C] <7> [173.564319] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel <7> [173.565315] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [173.565499] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C] <7> [173.565639] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:106:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [173.566085] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [173.566299] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [173.566508] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [173.566683] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [173.566861] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [173.567026] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [173.567312] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [173.567516] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [173.567689] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [173.567851] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [173.568011] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [173.568173] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [173.568334] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [173.568481] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A <7> [173.568627] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B <7> [173.568779] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C <7> [173.568963] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A <7> [173.569111] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A <7> [173.569256] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B <7> [173.569403] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C <7> [173.569565] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [173.569741] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [173.569908] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [173.570074] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [173.570297] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled <7> [173.570474] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled <7> [173.570659] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled <7> [173.570847] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [173.571025] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [173.571172] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [173.571318] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [173.571475] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [173.571624] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [173.571779] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [173.571925] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [173.572082] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [173.572246] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [173.572406] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [173.572551] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [173.572764] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [173.572920] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [173.573074] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [173.573227] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [173.573383] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [173.573531] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [173.573695] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [173.573871] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [173.574060] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [173.574251] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [173.574431] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 6 GT workarounds on global <7> [173.576363] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [173.576511] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [173.576681] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 14 context workarounds on rcs'0 <7> [173.589030] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [173.589170] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [173.589290] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [173.589407] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [173.589694] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [173.590045] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [173.590246] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [173.590391] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [173.590532] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [173.591140] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [173.594221] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [173.594989] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event <7> [173.595351] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [173.596031] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event <7> [173.596467] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event <6> [173.596536] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0 <7> [173.597894] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected <6> [173.613423] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [173.616616] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8 <7> [173.617841] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [173.618906] i915 display info: display version: 9 <7> [173.618910] i915 display info: cursor_needs_physical: no <7> [173.618909] [drm:drm_client_modeset_probe] <7> [173.618914] i915 display info: has_cdclk_crawl: no <7> [173.618917] i915 display info: has_cdclk_squash: no <7> [173.618919] i915 display info: has_ddi: yes <7> [173.618922] i915 display info: has_dp_mst: yes <7> [173.618925] i915 display info: has_dsb: no <7> [173.618927] i915 display info: has_fpga_dbg: yes <7> [173.618929] i915 display info: has_gmch: no <7> [173.618932] i915 display info: has_hotplug: yes <7> [173.618935] i915 display info: has_hti: no <7> [173.618937] i915 display info: has_ipc: yes <7> [173.618939] i915 display info: has_overlay: no <7> [173.618940] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [173.618942] i915 display info: has_psr: yes <7> [173.618945] i915 display info: has_psr_hw_tracking: yes <7> [173.618948] i915 display info: overlay_needs_physical: no <7> [173.618951] i915 display info: supports_tv: no <7> [173.618953] i915 display info: has_hdcp: yes <7> [173.618955] i915 display info: has_dmc: yes <7> [173.618957] i915 display info: has_dsc: no <7> [173.618946] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [173.618962] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [173.619211] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [173.619441] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [173.619678] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [173.620019] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] status updated from unknown to disconnected <7> [173.620031] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [173.620036] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [173.620041] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [173.620448] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [173.620681] i915 device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9 <7> [173.620686] i915 device info: graphics version: 9 <7> [173.620688] i915 device info: media version: 9 <7> [173.620691] i915 device info: graphics stepping: F0 <7> [173.620694] i915 device info: media stepping: F0 <7> [173.620697] i915 device info: display stepping: C0 <7> [173.620699] i915 device info: base die stepping: <7> [173.620702] i915 device info: gt: 2 <7> [173.620705] i915 device info: memory-regions: 0x21 <7> [173.620707] i915 device info: page-sizes: 0x11000 <7> [173.620710] i915 device info: platform: KABYLAKE <7> [173.620713] i915 device info: ppgtt-size: 48 <7> [173.620716] i915 device info: ppgtt-type: 2 <7> [173.620718] i915 device info: dma_mask_size: 39 <7> [173.620721] i915 device info: is_mobile: no <7> [173.620723] i915 device info: is_lp: no <7> [173.620726] i915 device info: require_force_probe: no <7> [173.620728] i915 device info: is_dgfx: no <7> [173.620731] i915 device info: has_64bit_reloc: yes <7> [173.620734] i915 device info: has_64k_pages: no <7> [173.620736] i915 device info: gpu_reset_clobbers_display: no <7> [173.620739] i915 device info: has_reset_engine: yes <7> [173.620741] i915 device info: has_3d_pipeline: yes <7> [173.620744] i915 device info: has_flat_ccs: no <7> [173.620746] i915 device info: has_global_mocs: no <7> [173.620749] i915 device info: has_gmd_id: no <7> [173.620752] i915 device info: has_gt_uc: yes <7> [173.620754] i915 device info: has_heci_pxp: no <7> [173.620757] i915 device info: has_heci_gscfi: no <7> [173.620759] i915 device info: has_guc_deprivilege: no <7> [173.620762] i915 device info: has_guc_tlb_invalidation: no <7> [173.620765] i915 device info: has_l3_ccs_read: no <7> [173.620768] i915 device info: has_l3_dpf: no <7> [173.620770] i915 device info: has_llc: yes <7> [173.620773] i915 device info: has_logical_ring_contexts: yes <7> [173.620775] i915 device info: has_logical_ring_elsq: no <7> [173.620778] i915 device info: has_media_ratio_mode: no <7> [173.620780] i915 device info: has_mslice_steering: no <7> [173.620783] i915 device info: has_oa_bpc_reporting: no <7> [173.620785] i915 device info: has_oa_slice_contrib_limits: no <7> [173.620788] i915 device info: has_oam: no <7> [173.620791] i915 device info: has_one_eu_per_fuse_bit: no <7> [173.620793] i915 device info: has_pxp: no <7> [173.620796] i915 device info: has_rc6: yes <7> [173.620798] i915 device info: has_rc6p: no <7> [173.620801] i915 device info: has_rps: yes <7> [173.620803] i915 device info: has_runtime_pm: yes <7> [173.620806] i915 device info: has_snoop: no <7> [173.620809] i915 device info: has_coherent_ggtt: yes <7> [173.620811] i915 device info: tuning_thread_rr_after_dep: no <7> [173.620814] i915 device info: unfenced_needs_alignment: no <7> [173.620816] i915 device info: hws_needs_physical: no <7> [173.620819] i915 device info: has_pooled_eu: no <7> [173.620821] i915 device info: rawclk rate: 24000 kHz <7> [173.620824] i915 device info: iommu: enabled <7> [173.620827] i915 device info: available engines: 40403 <7> [173.620830] i915 device info: slice total: 1, mask=0001 <7> [173.620833] i915 device info: subslice total: 3 <7> [173.620836] i915 device info: slice0: 3 subslices, mask=00000007 <7> [173.620839] i915 device info: slice1: 0 subslices, mask=00000000 <7> [173.620842] i915 device info: slice2: 0 subslices, mask=00000000 <7> [173.620845] i915 device info: EU total: 24 <7> [173.620847] i915 device info: EU per subslice: 8 <7> [173.620850] i915 device info: has slice power gating: no <7> [173.620853] i915 device info: has subslice power gating: no <7> [173.620855] i915 device info: has EU power gating: yes <6> [173.620858] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [173.620861] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [173.620864] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [173.621306] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [173.622389] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [173.623241] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] status updated from unknown to disconnected <7> [173.623252] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [173.623257] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [173.623262] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [173.624165] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [173.624325] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [173.624762] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [173.625017] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [173.625024] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [173.625229] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [173.629773] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [173.629782] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [173.630009] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected <7> [173.630024] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [173.630045] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [173.630050] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [173.630055] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [173.630059] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [173.630105] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [173.630117] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [173.630137] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [173.630146] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [173.630841] [drm:drm_client_modeset_probe] <7> [173.630869] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [173.630875] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [173.631149] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [173.631155] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [173.631159] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [173.632512] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [173.633705] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [173.634428] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [173.634435] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [173.634440] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [173.635149] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [173.635280] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [173.635678] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [173.635856] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [173.635861] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [173.635978] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [173.636847] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [173.640257] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [173.640264] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [173.640414] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [173.640419] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [173.640423] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [173.640426] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [173.640428] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [173.640451] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [173.640458] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [173.640462] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [173.640470] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [173.640477] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [173.640525] [drm:drm_client_modeset_probe] <7> [173.640469] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [173.640754] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [173.640762] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [173.640769] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [173.640936] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [173.640941] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [173.640945] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [173.642295] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [173.643166] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [173.643864] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [173.643871] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [173.643876] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [173.644327] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [173.644500] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [173.644929] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [173.645088] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [173.645093] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [173.645209] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [173.649506] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [173.649512] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [173.649662] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [173.649668] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [173.649673] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [173.649689] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [173.649693] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [173.649739] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [173.649748] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [173.649768] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [173.649774] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [173.649868] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [173.649877] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [173.651187] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [173.652017] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [173.652766] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [173.652845] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [173.652852] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [173.653622] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [173.653838] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [173.654242] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [173.654415] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [173.654420] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [173.654547] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [173.658698] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [173.658703] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [173.658827] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [173.661276] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [173.661282] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [173.661445] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [173.661941] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [173.661946] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [173.663252] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [173.664398] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [173.665238] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [173.665664] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [173.665669] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [173.666166] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [173.666296] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [173.666731] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [173.666911] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [173.666915] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [173.667025] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [173.671090] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [173.671094] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [173.671216] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [173.671518] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [173.671522] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [173.671763] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [173.671793] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [173.671796] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [173.672969] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [173.674118] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [173.674926] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [173.674946] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [173.674952] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [173.675382] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [173.675498] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [173.675926] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [173.676086] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [173.676090] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [173.676230] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [173.680269] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [173.680274] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [173.680397] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [173.873813] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [173.874186] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [173.874347] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [173.874487] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [173.875122] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.725050] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.735218] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.759847] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.765380] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.765986] [drm:drm_mode_setcrtc] [CRTC:51:pipe A] <7> [184.765892] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.766199] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.766945] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.767967] [drm:drm_mode_setcrtc] [CRTC:72:pipe B] <7> [184.768240] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.768688] [drm:drm_mode_setcrtc] [CRTC:93:pipe C] <7> [184.768671] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.769054] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.771194] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.771986] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.772834] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.773517] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.773636] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.774034] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.774188] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.774192] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.774305] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.778653] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.778659] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.889794] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.889986] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.890131] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.890270] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.890877] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.891526] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.894359] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.100718] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.105679] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.105931] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.106188] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.106939] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.107516] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.107943] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [185.108199] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [185.108451] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [185.108714] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [185.108986] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.109284] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.110960] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.112134] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.112978] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.113422] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.113541] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.114026] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.114191] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.114197] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.114309] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.118587] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.118591] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.133882] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [185.185297] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <6> [185.403445] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS <6> [185.403490] [IGT] i915_pm_rpm: exiting, ret=0

<6> [147.282717] [IGT] i915_pm_rpm: executing

<7> [147.286945] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [147.287610] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [147.287617] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [147.287921] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [147.287986] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [147.287991] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [147.288169] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [147.289606] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [147.290708] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [147.291526] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [147.291576] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [147.291581] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [147.292204] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [147.292323] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [147.292730] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [147.292899] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [147.292903] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [147.293047] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [147.297413] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [147.297418] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [147.297541] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [147.301179] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [147.301185] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [147.301347] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [147.301828] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [147.301833] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [147.302999] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [147.304137] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [147.304946] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [147.305363] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [147.305367] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [147.305845] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [147.305962] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [147.306347] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [147.306510] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [147.306514] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [147.306625] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [147.310994] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [147.310999] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [147.311119] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [147.311423] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [147.311429] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [147.311606] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [147.311622] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [147.311626] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [147.312972] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [147.314130] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [147.314957] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [147.314975] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [147.314980] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [147.315426] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [147.315554] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [147.315969] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [147.316167] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [147.316171] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [147.316282] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [147.320498] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [147.320503] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [147.320623] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [147.425783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [147.426013] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [147.426195] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [147.426370] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [147.427022] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [158.367070] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [158.377294] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [158.401845] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [158.411958] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [158.412711] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]

<7> [158.412935] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [158.413392] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [158.414308] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [158.415767] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]

<7> [158.415755] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [158.416464] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [158.417048] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [158.419554] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [158.420710] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [158.421402] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [158.422056] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [158.422176] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [158.422511] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [158.422712] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [158.422717] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [158.422844] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [158.427069] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [158.427074] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [158.427311] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]

<7> [158.537746] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [158.538049] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [158.538298] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [158.538541] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [158.539272] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [158.540271] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [158.545434] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [158.629004] [IGT] i915_pm_rpm: starting subtest module-reload

<7> [158.729830] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [158.735319] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [158.735628] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [158.736090] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [158.736760] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [158.737437] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [158.737891] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [158.738128] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [158.738363] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [158.738594] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [158.738886] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [158.739224] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [158.740878] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [158.742024] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [158.742877] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [158.743324] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [158.743439] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [158.743830] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [158.743980] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [158.743986] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [158.744098] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [158.748418] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [158.748422] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [158.767938] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [158.808326] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<6> [159.037389] [IGT] Reloading i915 w/o display

<7> [159.189085] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [159.189308] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [159.189484] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH

<7> [159.189657] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [159.189870] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [159.190063] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz

<7> [159.190609] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [159.190741] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [159.190873] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M

<6> [159.190985] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [159.190989] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [159.191211] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [159.191225] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047

<7> [159.191367] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K

<7> [159.191727] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018

<7> [159.191922] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [159.192067] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [159.192208] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [159.192348] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [159.196411] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [159.196571] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [159.196795] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [159.196976] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [159.197187] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [159.197299] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [159.197430] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [159.197533] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [159.197636] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [159.197754] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [159.197856] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [159.197957] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [159.198057] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [159.198157] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [159.198558] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [159.198739] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196

<7> [159.198899] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [159.199057] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [159.199214] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [159.199370] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [159.199527] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812)

<7> [159.199691] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34)

<7> [159.199846] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [159.200003] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [159.200167] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [159.200323] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [159.200475] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [159.200671] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [159.200896] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6

<7> [159.201078] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [159.201235] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [159.201391] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [159.201542] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [159.201703] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [159.201854] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [159.202005] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3

<7> [159.202156] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [159.202308] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3

<7> [159.202461] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [159.202625] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [159.202816] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [159.202985] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [159.203139] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [159.203637] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [159.203801] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [159.203977] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [159.204170] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [159.204325] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [159.204511] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [159.204724] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [159.204936] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [159.205091] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [159.205244] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [159.205396] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [159.205582] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<7> [159.205985] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [159.206407] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [159.206558] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [159.207112] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [159.207271] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [159.207423] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [159.207575] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [159.207697] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [159.207886] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<6> [159.208111] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [159.208035] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [159.208208] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [159.208360] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [159.208503] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [159.208658] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [159.208815] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [159.209938] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [159.210844] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [159.211066] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] Using AUX CH A (VBT)

<7> [159.211303] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A]

<7> [159.213691] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [159.213873] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [159.214041] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [159.214206] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static

<7> [159.214375] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [159.214539] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [159.214719] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [159.214899] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [159.215087] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [159.215259] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0

<7> [159.215482] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1

<7> [159.215723] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0

<7> [159.215933] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [159.216072] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [159.216208] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [159.216343] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [159.216479] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [159.216742] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [159.217093] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on

<7> [159.217260] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [159.217477] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [159.217631] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [159.217886] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [159.218044] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [159.436653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.447653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.458653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.469655] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.480652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.491652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.502653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.513654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.524652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.535652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.546653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.557654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.568653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.579653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.590653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.601653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.612652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.623652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.634654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.645654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.656652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.667653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.678653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.689653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.700652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.711652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.722653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.733654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.744653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.755652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.766653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.777654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [159.777866] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110

<6> [159.777879] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP

<7> [159.777940] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off

<7> [159.778145] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [159.778379] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] Using AUX CH B (VBT)

<7> [159.778539] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B]

<7> [159.789654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [159.800652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [159.811653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [159.822652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [159.833654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [159.844652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [159.855653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [159.866653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [159.877653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [159.888652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [159.899653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [159.910652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [159.921665] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [159.932652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [159.943653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [159.954652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [159.965653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [159.976652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [159.987654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [159.998652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.009659] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.020652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.031652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.042653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.053651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.064651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.075652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.086653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.097651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.108651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.119651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.130653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.130863] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX B/DDI B/PHY B: Too many retries, giving up. First error: -110

<7> [160.130876] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel

<7> [160.141651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.152651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.163652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.174652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.185651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.196651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.207652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.218652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.229651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.240651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.251652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.262652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.273651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.284651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.295652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.306652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.317651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.328651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.339653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.350651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.361651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.372651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.383653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.394652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.405651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.416653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.427652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.438651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.449653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.460654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.471651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.482651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [160.482858] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX B/DDI B/PHY B: Too many retries, giving up. First error: -110

<7> [160.482870] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [160.483030] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DDI C/PHY C] Using AUX CH C (VBT)

<7> [160.483188] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C]

<7> [160.484258] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel

<7> [160.485270] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [160.485425] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C]

<7> [160.485569] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:106:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [160.485957] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [160.486171] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [160.486381] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [160.486544] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [160.486742] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [160.486925] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [160.487119] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [160.487289] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [160.487449] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [160.487608] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [160.487785] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [160.487952] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [160.488113] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [160.488258] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A

<7> [160.488403] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B

<7> [160.488549] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C

<7> [160.488732] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [160.488883] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A

<7> [160.489029] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B

<7> [160.489175] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C

<7> [160.489338] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [160.489507] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [160.489690] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [160.489862] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [160.490101] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled

<7> [160.490277] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled

<7> [160.490457] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled

<7> [160.490684] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [160.490842] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [160.490987] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [160.491132] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [160.491288] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [160.491437] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [160.491584] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [160.491739] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [160.491908] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [160.492057] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [160.492203] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [160.492349] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [160.492551] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [160.492717] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [160.492883] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [160.493036] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [160.493191] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [160.493339] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [160.493482] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [160.493671] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [160.493829] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [160.493956] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [160.494100] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 6 GT workarounds on global

<7> [160.496120] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [160.496268] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [160.496409] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 14 context workarounds on rcs'0

<7> [160.507429] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [160.507570] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [160.507752] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [160.507956] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [160.508355] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [160.508786] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [160.509002] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [160.509201] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [160.509399] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [160.509624] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [160.513954] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [160.514563] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event

<7> [160.515004] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [160.515569] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event

<7> [160.515877] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event

<6> [160.515916] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0

<7> [160.517248] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected

<6> [160.529517] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [160.531523] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7

<7> [160.532325] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [160.533187] i915 display info: display version: 9

<7> [160.533191] i915 display info: cursor_needs_physical: no

<7> [160.533193] i915 display info: has_cdclk_crawl: no

<7> [160.533192] [drm:drm_client_modeset_probe]

<7> [160.533196] i915 display info: has_cdclk_squash: no

<7> [160.533199] i915 display info: has_ddi: yes

<7> [160.533201] i915 display info: has_dp_mst: yes

<7> [160.533204] i915 display info: has_dsb: no

<7> [160.533206] i915 display info: has_fpga_dbg: yes

<7> [160.533208] i915 display info: has_gmch: no

<7> [160.533211] i915 display info: has_hotplug: yes

<7> [160.533213] i915 display info: has_hti: no

<7> [160.533215] i915 display info: has_ipc: yes

<7> [160.533218] i915 display info: has_overlay: no

<7> [160.533220] i915 display info: has_psr: yes

<7> [160.533223] i915 display info: has_psr_hw_tracking: yes

<7> [160.533225] i915 display info: overlay_needs_physical: no

<7> [160.533228] i915 display info: supports_tv: no

<7> [160.533230] i915 display info: has_hdcp: yes

<7> [160.533233] i915 display info: has_dmc: yes

<7> [160.533235] i915 display info: has_dsc: no

<7> [160.533235] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [160.533244] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [160.533239] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [160.533510] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] status updated from unknown to disconnected

<7> [160.533525] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [160.533533] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [160.533539] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [160.533535] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [160.533784] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] status updated from unknown to disconnected

<7> [160.533796] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [160.533802] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [160.533784] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [160.533809] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [160.534036] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected

<7> [160.534047] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [160.534053] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [160.534058] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [160.534062] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [160.534066] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [160.534084] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [160.534096] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [160.534116] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [160.534126] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [160.534029] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [160.534706] [drm:drm_client_modeset_probe]

<7> [160.534743] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [160.534751] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [160.534744] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [160.534983] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [160.534989] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [160.534989] i915 device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9

<7> [160.534994] i915 device info: graphics version: 9

<7> [160.534996] i915 device info: media version: 9

<7> [160.534998] i915 device info: graphics stepping: F0

<7> [160.535001] i915 device info: media stepping: F0

<7> [160.535003] i915 device info: display stepping: C0

<7> [160.535006] i915 device info: base die stepping: **

<7> [160.535008] i915 device info: gt: 2

<7> [160.535010] i915 device info: memory-regions: 0x21

<7> [160.535013] i915 device info: page-sizes: 0x11000

<7> [160.535015] i915 device info: platform: KABYLAKE

<7> [160.535017] i915 device info: ppgtt-size: 48

<7> [160.535020] i915 device info: ppgtt-type: 2

<7> [160.535022] i915 device info: dma_mask_size: 39

<7> [160.535024] i915 device info: is_mobile: no

<7> [160.535027] i915 device info: is_lp: no

<7> [160.535029] i915 device info: require_force_probe: no

<7> [160.535031] i915 device info: is_dgfx: no

<7> [160.535033] i915 device info: has_64bit_reloc: yes

<7> [160.535036] i915 device info: has_64k_pages: no

<7> [160.535038] i915 device info: gpu_reset_clobbers_display: no

<7> [160.535040] i915 device info: has_reset_engine: yes

<7> [160.535043] i915 device info: has_3d_pipeline: yes

<7> [160.535045] i915 device info: has_flat_ccs: no

<7> [160.535047] i915 device info: has_global_mocs: no

<7> [160.535050] i915 device info: has_gmd_id: no

<7> [160.535052] i915 device info: has_gt_uc: yes

<7> [160.535054] i915 device info: has_heci_pxp: no

<7> [160.535056] i915 device info: has_heci_gscfi: no

<7> [160.535059] i915 device info: has_guc_deprivilege: no

<7> [160.535061] i915 device info: has_guc_tlb_invalidation: no

<7> [160.535063] i915 device info: has_l3_ccs_read: no

<7> [160.535066] i915 device info: has_l3_dpf: no

<7> [160.535068] i915 device info: has_llc: yes

<7> [160.535070] i915 device info: has_logical_ring_contexts: yes

<7> [160.535073] i915 device info: has_logical_ring_elsq: no

<7> [160.535075] i915 device info: has_media_ratio_mode: no

<7> [160.535077] i915 device info: has_mslice_steering: no

<7> [160.535080] i915 device info: has_oa_bpc_reporting: no

<7> [160.535082] i915 device info: has_oa_slice_contrib_limits: no

<7> [160.535084] i915 device info: has_oam: no

<7> [160.535087] i915 device info: has_one_eu_per_fuse_bit: no

<7> [160.535089] i915 device info: has_pxp: no

<7> [160.535091] i915 device info: has_rc6: yes

<7> [160.535094] i915 device info: has_rc6p: no

<7> [160.535096] i915 device info: has_rps: yes

<7> [160.535098] i915 device info: has_runtime_pm: yes

<7> [160.534999] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [160.535100] i915 device info: has_snoop: no

<7> [160.535102] i915 device info: has_coherent_ggtt: yes

<7> [160.535104] i915 device info: tuning_thread_rr_after_dep: no

<7> [160.535106] i915 device info: unfenced_needs_alignment: no

<7> [160.535108] i915 device info: hws_needs_physical: no

<7> [160.535110] i915 device info: has_pooled_eu: no

<7> [160.535112] i915 device info: rawclk rate: 24000 kHz

<7> [160.535115] i915 device info: iommu: enabled

<7> [160.535117] i915 device info: available engines: 40403

<7> [160.535119] i915 device info: slice total: 1, mask=0001

<7> [160.535122] i915 device info: subslice total: 3

<7> [160.535124] i915 device info: slice0: 3 subslices, mask=00000007

<7> [160.535126] i915 device info: slice1: 0 subslices, mask=00000000

<7> [160.535128] i915 device info: slice2: 0 subslices, mask=00000000

<7> [160.535131] i915 device info: EU total: 24

<7> [160.535133] i915 device info: EU per subslice: 8

<7> [160.535135] i915 device info: has slice power gating: no

<7> [160.535137] i915 device info: has subslice power gating: no

<7> [160.535139] i915 device info: has EU power gating: yes

<6> [160.535141] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [160.535143] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [160.535145] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [160.535215] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [160.535221] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [160.535228] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [160.535458] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [160.535464] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [160.535469] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [160.535473] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [160.535477] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [160.535521] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [160.535532] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [160.535549] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [160.535558] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [160.539719] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [160.690356] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [160.691354] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [160.691877] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [160.692501] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [160.693484] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [171.589567] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [171.597723] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [171.622337] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [171.627304] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [171.627849] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [171.628348] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [171.628677] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [171.628968] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [171.629254] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [171.629869] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [171.633589] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [171.839751] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [171.848413] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [171.849442] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [171.849897] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [171.850044] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [171.850368] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [171.850735] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [171.850894] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [171.851787] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [171.852349] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [171.852537] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [171.852701] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [171.852867] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [171.869923] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [171.916246] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<6> [172.133417] [IGT] Reloading i915 as normal

<7> [172.268019] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [172.268241] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [172.268411] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH

<7> [172.268564] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [172.268926] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [172.269162] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz

<7> [172.269913] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [172.270088] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [172.270256] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M

<6> [172.270421] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [172.270426] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [172.270786] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [172.270809] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047

<7> [172.271055] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K

<7> [172.271484] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018

<7> [172.271788] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [172.271994] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [172.272233] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [172.272434] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [172.276694] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [172.276870] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [172.277019] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [172.277167] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [172.277315] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [172.277484] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [172.277615] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [172.277737] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [172.277940] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [172.278053] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [172.278165] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [172.278276] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [172.278386] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [172.278498] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [172.279202] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [172.279462] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196

<7> [172.279769] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [172.279996] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [172.280214] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [172.280431] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [172.280675] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812)

<7> [172.280911] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34)

<7> [172.281128] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [172.281398] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [172.281629] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [172.281905] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [172.282135] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [172.282345] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [172.282556] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6

<7> [172.282844] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [172.283098] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [172.283350] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [172.283580] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [172.283850] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [172.284079] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [172.284291] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3

<7> [172.284499] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [172.284772] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3

<7> [172.285034] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [172.285260] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [172.285517] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [172.285846] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [172.286081] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [172.286771] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [172.287024] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [172.287272] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [172.287534] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [172.287811] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [172.288041] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [172.288266] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [172.288570] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [172.288803] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [172.289022] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [172.289241] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [172.289507] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<7> [172.290135] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [172.290386] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [172.290627] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [172.290610] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [172.290786] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [172.290852] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [172.290968] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [172.291112] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [172.291085] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [172.291255] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [172.291399] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [172.291541] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<6> [172.291664] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [172.291703] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [172.291863] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [172.292021] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [172.293144] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [172.294100] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [172.294320] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] Using AUX CH A (VBT)

<7> [172.294484] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A]

<7> [172.296705] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [172.296926] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [172.297114] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [172.297269] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static

<7> [172.297427] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [172.297581] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [172.297803] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [172.297957] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [172.298110] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [172.298261] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0

<7> [172.298413] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1

<7> [172.298607] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0

<7> [172.298871] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [172.299010] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [172.299146] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [172.299281] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [172.299417] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [172.299621] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [172.299987] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on

<7> [172.300151] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [172.300411] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [172.300633] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [172.300982] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [172.301153] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [172.516652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [172.527653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [172.538654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [172.549654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [172.560654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [172.571652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [172.582652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [172.593655] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [172.604652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [172.615652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [172.626653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [172.637655] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [172.648652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [172.659652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [172.670653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [172.681655] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [172.692652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [172.703652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [172.714653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [172.725654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [172.736653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [172.747652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [172.758653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [172.769654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [172.780652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [172.791653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [172.802652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [172.813654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [172.824652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [172.835653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [172.846652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [172.857654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [172.857869] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110

<6> [172.857882] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP

<7> [172.857941] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off

<7> [172.858146] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [172.858380] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] Using AUX CH B (VBT)

<7> [172.858540] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B]

<7> [172.869666] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [172.880652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [172.891654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [172.902652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [172.913654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [172.924652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [172.935653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [172.946653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [172.957654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [172.968653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [172.979653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [172.990652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.001667] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.012653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.023653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.034655] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.045652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.056653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.067656] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.078652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.089652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.100655] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.111652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.122652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.133654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.144653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.155653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.166654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.177652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.188654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.199654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.210653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.210863] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX B/DDI B/PHY B: Too many retries, giving up. First error: -110

<7> [173.210876] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel

<7> [173.221652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.232654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.243651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.254651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.265652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.276654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.287652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.298652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.309651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.320654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.331652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.342651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.353652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.364654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.375651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.386651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.397652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.408654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.419651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.430653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.441652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.452653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.463652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.474653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.485652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.496652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.507652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.518654] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.529652] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.540651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.551651] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.562653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [173.562866] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX B/DDI B/PHY B: Too many retries, giving up. First error: -110

<7> [173.562878] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [173.563041] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DDI C/PHY C] Using AUX CH C (VBT)

<7> [173.563200] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C]

<7> [173.564319] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel

<7> [173.565315] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [173.565499] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C]

<7> [173.565639] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:106:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [173.566085] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [173.566299] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [173.566508] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [173.566683] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [173.566861] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [173.567026] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [173.567312] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [173.567516] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [173.567689] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [173.567851] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [173.568011] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [173.568173] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [173.568334] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [173.568481] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A

<7> [173.568627] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B

<7> [173.568779] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C

<7> [173.568963] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [173.569111] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A

<7> [173.569256] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B

<7> [173.569403] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C

<7> [173.569565] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [173.569741] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [173.569908] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [173.570074] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [173.570297] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled

<7> [173.570474] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled

<7> [173.570659] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled

<7> [173.570847] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [173.571025] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [173.571172] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [173.571318] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [173.571475] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [173.571624] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [173.571779] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [173.571925] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [173.572082] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [173.572246] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [173.572406] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [173.572551] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [173.572764] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [173.572920] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [173.573074] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [173.573227] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [173.573383] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [173.573531] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [173.573695] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [173.573871] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [173.574060] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [173.574251] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [173.574431] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 6 GT workarounds on global

<7> [173.576363] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [173.576511] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [173.576681] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 14 context workarounds on rcs'0

<7> [173.589030] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [173.589170] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [173.589290] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [173.589407] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [173.589694] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [173.590045] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [173.590246] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [173.590391] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [173.590532] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [173.591140] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [173.594221] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [173.594989] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event

<7> [173.595351] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [173.596031] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event

<7> [173.596467] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event

<6> [173.596536] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0

<7> [173.597894] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected

<6> [173.613423] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [173.616616] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8

<7> [173.617841] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [173.618906] i915 display info: display version: 9

<7> [173.618910] i915 display info: cursor_needs_physical: no

<7> [173.618909] [drm:drm_client_modeset_probe]

<7> [173.618914] i915 display info: has_cdclk_crawl: no

<7> [173.618917] i915 display info: has_cdclk_squash: no

<7> [173.618919] i915 display info: has_ddi: yes

<7> [173.618922] i915 display info: has_dp_mst: yes

<7> [173.618925] i915 display info: has_dsb: no

<7> [173.618927] i915 display info: has_fpga_dbg: yes

<7> [173.618929] i915 display info: has_gmch: no

<7> [173.618932] i915 display info: has_hotplug: yes

<7> [173.618935] i915 display info: has_hti: no

<7> [173.618937] i915 display info: has_ipc: yes

<7> [173.618939] i915 display info: has_overlay: no

<7> [173.618940] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [173.618942] i915 display info: has_psr: yes

<7> [173.618945] i915 display info: has_psr_hw_tracking: yes

<7> [173.618948] i915 display info: overlay_needs_physical: no

<7> [173.618951] i915 display info: supports_tv: no

<7> [173.618953] i915 display info: has_hdcp: yes

<7> [173.618955] i915 display info: has_dmc: yes

<7> [173.618957] i915 display info: has_dsc: no

<7> [173.618946] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [173.618962] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [173.619211] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [173.619441] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [173.619678] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [173.620019] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] status updated from unknown to disconnected

<7> [173.620031] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [173.620036] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [173.620041] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [173.620448] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [173.620681] i915 device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9

<7> [173.620686] i915 device info: graphics version: 9

<7> [173.620688] i915 device info: media version: 9

<7> [173.620691] i915 device info: graphics stepping: F0

<7> [173.620694] i915 device info: media stepping: F0

<7> [173.620697] i915 device info: display stepping: C0

<7> [173.620699] i915 device info: base die stepping: **

<7> [173.620702] i915 device info: gt: 2

<7> [173.620705] i915 device info: memory-regions: 0x21

<7> [173.620707] i915 device info: page-sizes: 0x11000

<7> [173.620710] i915 device info: platform: KABYLAKE

<7> [173.620713] i915 device info: ppgtt-size: 48

<7> [173.620716] i915 device info: ppgtt-type: 2

<7> [173.620718] i915 device info: dma_mask_size: 39

<7> [173.620721] i915 device info: is_mobile: no

<7> [173.620723] i915 device info: is_lp: no

<7> [173.620726] i915 device info: require_force_probe: no

<7> [173.620728] i915 device info: is_dgfx: no

<7> [173.620731] i915 device info: has_64bit_reloc: yes

<7> [173.620734] i915 device info: has_64k_pages: no

<7> [173.620736] i915 device info: gpu_reset_clobbers_display: no

<7> [173.620739] i915 device info: has_reset_engine: yes

<7> [173.620741] i915 device info: has_3d_pipeline: yes

<7> [173.620744] i915 device info: has_flat_ccs: no

<7> [173.620746] i915 device info: has_global_mocs: no

<7> [173.620749] i915 device info: has_gmd_id: no

<7> [173.620752] i915 device info: has_gt_uc: yes

<7> [173.620754] i915 device info: has_heci_pxp: no

<7> [173.620757] i915 device info: has_heci_gscfi: no

<7> [173.620759] i915 device info: has_guc_deprivilege: no

<7> [173.620762] i915 device info: has_guc_tlb_invalidation: no

<7> [173.620765] i915 device info: has_l3_ccs_read: no

<7> [173.620768] i915 device info: has_l3_dpf: no

<7> [173.620770] i915 device info: has_llc: yes

<7> [173.620773] i915 device info: has_logical_ring_contexts: yes

<7> [173.620775] i915 device info: has_logical_ring_elsq: no

<7> [173.620778] i915 device info: has_media_ratio_mode: no

<7> [173.620780] i915 device info: has_mslice_steering: no

<7> [173.620783] i915 device info: has_oa_bpc_reporting: no

<7> [173.620785] i915 device info: has_oa_slice_contrib_limits: no

<7> [173.620788] i915 device info: has_oam: no

<7> [173.620791] i915 device info: has_one_eu_per_fuse_bit: no

<7> [173.620793] i915 device info: has_pxp: no

<7> [173.620796] i915 device info: has_rc6: yes

<7> [173.620798] i915 device info: has_rc6p: no

<7> [173.620801] i915 device info: has_rps: yes

<7> [173.620803] i915 device info: has_runtime_pm: yes

<7> [173.620806] i915 device info: has_snoop: no

<7> [173.620809] i915 device info: has_coherent_ggtt: yes

<7> [173.620811] i915 device info: tuning_thread_rr_after_dep: no

<7> [173.620814] i915 device info: unfenced_needs_alignment: no

<7> [173.620816] i915 device info: hws_needs_physical: no

<7> [173.620819] i915 device info: has_pooled_eu: no

<7> [173.620821] i915 device info: rawclk rate: 24000 kHz

<7> [173.620824] i915 device info: iommu: enabled

<7> [173.620827] i915 device info: available engines: 40403

<7> [173.620830] i915 device info: slice total: 1, mask=0001

<7> [173.620833] i915 device info: subslice total: 3

<7> [173.620836] i915 device info: slice0: 3 subslices, mask=00000007

<7> [173.620839] i915 device info: slice1: 0 subslices, mask=00000000

<7> [173.620842] i915 device info: slice2: 0 subslices, mask=00000000

<7> [173.620845] i915 device info: EU total: 24

<7> [173.620847] i915 device info: EU per subslice: 8

<7> [173.620850] i915 device info: has slice power gating: no

<7> [173.620853] i915 device info: has subslice power gating: no

<7> [173.620855] i915 device info: has EU power gating: yes

<6> [173.620858] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [173.620861] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [173.620864] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [173.621306] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [173.622389] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [173.623241] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] status updated from unknown to disconnected

<7> [173.623252] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [173.623257] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [173.623262] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [173.624165] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [173.624325] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [173.624762] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [173.625017] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [173.625024] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [173.625229] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [173.629773] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [173.629782] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [173.630009] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected

<7> [173.630024] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [173.630045] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [173.630050] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [173.630055] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [173.630059] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [173.630105] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [173.630117] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [173.630137] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [173.630146] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [173.630841] [drm:drm_client_modeset_probe]

<7> [173.630869] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [173.630875] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [173.631149] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [173.631155] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [173.631159] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [173.632512] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [173.633705] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [173.634428] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [173.634435] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [173.634440] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [173.635149] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [173.635280] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [173.635678] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [173.635856] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [173.635861] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [173.635978] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [173.636847] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [173.640257] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [173.640264] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [173.640414] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [173.640419] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [173.640423] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [173.640426] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [173.640428] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [173.640451] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [173.640458] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [173.640462] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [173.640470] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [173.640477] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [173.640525] [drm:drm_client_modeset_probe]

<7> [173.640469] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [173.640754] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [173.640762] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [173.640769] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [173.640936] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [173.640941] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [173.640945] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [173.642295] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [173.643166] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [173.643864] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [173.643871] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [173.643876] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [173.644327] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [173.644500] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [173.644929] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [173.645088] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [173.645093] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [173.645209] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [173.649506] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [173.649512] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [173.649662] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [173.649668] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [173.649673] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [173.649689] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [173.649693] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [173.649739] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [173.649748] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [173.649768] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [173.649774] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [173.649868] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [173.649877] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [173.651187] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [173.652017] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [173.652766] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [173.652845] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [173.652852] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [173.653622] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [173.653838] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [173.654242] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [173.654415] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [173.654420] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [173.654547] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [173.658698] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [173.658703] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [173.658827] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [173.661276] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [173.661282] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [173.661445] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [173.661941] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [173.661946] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [173.663252] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [173.664398] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [173.665238] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [173.665664] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [173.665669] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [173.666166] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [173.666296] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [173.666731] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [173.666911] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [173.666915] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [173.667025] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [173.671090] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [173.671094] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [173.671216] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [173.671518] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [173.671522] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [173.671763] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [173.671793] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [173.671796] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [173.672969] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [173.674118] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [173.674926] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [173.674946] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [173.674952] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [173.675382] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [173.675498] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [173.675926] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [173.676086] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [173.676090] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [173.676230] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [173.680269] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [173.680274] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [173.680397] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [173.873813] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [173.874186] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [173.874347] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [173.874487] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [173.875122] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [184.725050] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [184.735218] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [184.759847] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [184.765380] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [184.765986] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]

<7> [184.765892] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [184.766199] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [184.766945] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [184.767967] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]

<7> [184.768240] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [184.768688] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]

<7> [184.768671] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [184.769054] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [184.771194] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [184.771986] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [184.772834] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [184.773517] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [184.773636] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [184.774034] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [184.774188] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [184.774192] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [184.774305] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [184.778653] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [184.778659] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [184.889794] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [184.889986] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [184.890131] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [184.890270] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [184.890877] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [184.891526] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [184.894359] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [185.100718] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [185.105679] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [185.105931] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.106188] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [185.106939] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.107516] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [185.107943] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [185.108199] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [185.108451] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [185.108714] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [185.108986] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [185.109284] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [185.110960] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [185.112134] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [185.112978] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [185.113422] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [185.113541] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [185.114026] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [185.114191] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [185.114197] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [185.114309] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [185.118587] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [185.118591] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [185.133882] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [185.185297] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<6> [185.403445] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS

<6> [185.403490] [IGT] i915_pm_rpm: exiting, ret=0

Results for igt@i915_pm_rpm@module-reload