Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 1.28-gca4607939 (x86_64) (Linux: 6.8.0-rc6-linus-v6.8-rc6-gd206a76d7d27+ x86_64)
Out 
Using IGT_SRANDOM=1708905472 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.028s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.028s)
Dmesg
<6> [189.891111] Console: switching to colour dummy device 80x25
<6> [189.891379] [IGT] kms_force_connector_basic: executing
<7> [189.907997] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [189.909523] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [189.916296] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [189.917972] [drm:status_store] [CONNECTOR:275:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [189.917984] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [189.917993] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [189.918393] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [189.918430] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [189.918437] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [189.918785] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [189.918969] [drm:status_store] [CONNECTOR:281:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [189.918975] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2]
<7> [189.918982] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:281:HDMI-A-2]
<7> [189.919344] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2] disconnected
<7> [189.919378] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2]
<7> [189.919384] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:281:HDMI-A-2]
<7> [189.919711] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2] disconnected
<7> [189.919739] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [189.919744] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [189.920075] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<6> [189.920521] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [189.920691] [drm:status_store] [CONNECTOR:275:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [189.920697] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [189.920704] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [189.921219] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [189.921441] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [189.921877] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [189.922123] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [189.922137] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [189.922341] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc3. force bit now 1
<7> [189.928214] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [189.928226] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc3. force bit now 0
<7> [189.928434] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] status updated from disconnected to connected
<7> [189.928594] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] probed modes :
<7> [189.928600] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [189.928609] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [189.928616] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [189.928622] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [189.928629] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [189.928673] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [189.928679] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [189.929136] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [189.929333] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [189.929750] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [189.929950] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [189.929960] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [189.930164] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc3. force bit now 1
<7> [189.935997] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [189.936007] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc3. force bit now 0
<7> [189.936278] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] probed modes :
<7> [189.936283] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [189.936290] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [189.936296] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [189.936302] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [189.936308] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [189.936545] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:275:HDMI-A-1] EDID override set
<7> [189.936570] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [189.936576] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [189.936810] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:275:HDMI-A-1] ELD monitor IGT
<7> [189.936818] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:275:HDMI-A-1] ELD size 24, SAD count 0
<7> [189.937075] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [189.937276] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [189.937692] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [189.937895] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [189.938021] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [189.938029] [drm:drm_mode_prune_invalid] Not using 800x600 mode: STALE
<7> [189.938051] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [189.938058] [drm:drm_mode_prune_invalid] Not using 848x480 mode: STALE
<7> [189.938067] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] probed modes :
<7> [189.938071] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [189.938077] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [189.938083] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [189.938089] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [189.938094] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [189.938100] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [189.938273] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:275:HDMI-A-1] EDID override set
<7> [189.938304] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [189.938310] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [189.938543] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:275:HDMI-A-1] ELD monitor IGT
<7> [189.938549] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:275:HDMI-A-1] ELD size 24, SAD count 0
<7> [189.938555] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:275:HDMI-A-1] EDID changed, epoch counter 4
<7> [189.938795] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [189.938991] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [189.939412] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [189.939614] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [189.939730] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [189.939737] [drm:drm_mode_prune_invalid] Not using 1400x1050 mode: STALE
<7> [189.939746] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] probed modes :
<7> [189.939751] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [189.939757] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [189.939763] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [189.939768] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [189.939774] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [189.939918] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:275:HDMI-A-1] EDID override reset
<7> [189.939946] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [189.939952] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [189.940392] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [189.940583] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [189.940983] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [189.941186] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [189.941195] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [189.941383] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc3. force bit now 1
<7> [189.947256] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [189.947266] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc3. force bit now 0
<7> [189.947457] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:275:HDMI-A-1] EDID changed, epoch counter 5
<7> [189.947526] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [189.947533] [drm:drm_mode_prune_invalid] Not using 1920x1080 mode: STALE
<7> [189.947542] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [189.947548] [drm:drm_mode_prune_invalid] Not using 1280x720 mode: STALE
<7> [189.947556] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] probed modes :
<7> [189.947561] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [189.947567] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [189.947573] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [189.947578] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [189.947584] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [189.947761] [drm:status_store] [CONNECTOR:275:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [189.947768] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [189.947775] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [189.948107] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] status updated from connected to disconnected
<7> [189.948122] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [189.948177] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [189.948184] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [189.948484] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<6> [189.948953] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [189.949116] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [189.950429] [drm:status_store] [CONNECTOR:236:eDP-1] force updated from 0 to 0 or reprobing
<7> [189.950436] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1]
<7> [189.950444] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]
<7> [189.951659] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7> [189.952606] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [189.952824] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [189.953064] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [189.953281] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [189.953515] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<7> [189.953523] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [189.953530] [drm] DisplayID checksum invalid, remainder is 248
<7> [189.953533] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [189.953538] [drm] DisplayID checksum invalid, remainder is 248
<7> [189.953542] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [189.953548] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [189.953553] [drm] DisplayID checksum invalid, remainder is 248
<7> [189.953557] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor
<7> [189.953562] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [189.953567] [drm] DisplayID checksum invalid, remainder is 248
<7> [189.953571] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0
<7> [189.953577] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [189.953581] [drm] DisplayID checksum invalid, remainder is 248
<7> [189.953601] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: yes
<7> [189.953811] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [189.955000] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [189.955221] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [189.956228] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [189.956233] [drm] DisplayID checksum invalid, remainder is 248
<7> [189.956237] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [189.956241] [drm] DisplayID checksum invalid, remainder is 248
<7> [189.956245] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [189.956249] [drm] DisplayID checksum invalid, remainder is 248
<7> [189.956291] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes :
<7> [189.956296] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [189.956339] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1]
<7> [189.956346] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]
<7> [189.957477] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7> [189.958477] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [189.958685] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [189.958898] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [189.959117] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [189.959345] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<7> [189.959352] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [189.959357] [drm] DisplayID checksum invalid, remainder is 248
<7> [189.959360] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [189.959364] [drm] DisplayID checksum invalid, remainder is 248
<7> [189.959368] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [189.959374] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [189.959378] [drm] DisplayID checksum invalid, remainder is 248
<7> [189.959381] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor
<7> [189.959387] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [189.959391] [drm] DisplayID checksum invalid, remainder is 248
<7> [189.959394] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0
<7> [189.959400] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [189.959404] [drm] DisplayID checksum invalid, remainder is 248
<7> [189.959420] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: yes
<7> [189.959638] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [189.960714] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [189.960928] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [189.961911] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [189.961916] [drm] DisplayID checksum invalid, remainder is 248
<7> [189.961919] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [189.961923] [drm] DisplayID checksum invalid, remainder is 248
<7> [189.961927] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [189.961931] [drm] DisplayID checksum invalid, remainder is 248
<7> [189.961966] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes :
<7> [189.961971] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [189.962129] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:236:eDP-1] EDID override reset
<7> [189.962154] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1]
<7> [189.962160] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]
<7> [189.963276] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7> [189.964216] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [189.964418] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [189.964625] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [189.964828] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [189.965057] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<7> [189.965064] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [189.965068] [drm] DisplayID checksum invalid, remainder is 248
<7> [189.965071] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [189.965075] [drm] DisplayID checksum invalid, remainder is 248
<7> [189.965078] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [189.965083] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [189.965087] [drm] DisplayID checksum invalid, remainder is 248
<7> [189.965090] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor
<7> [189.965095] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [189.965099] [drm] DisplayID checksum invalid, remainder is 248
<7> [189.965102] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0
<7> [189.965108] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [189.965112] [drm] DisplayID checksum invalid, remainder is 248
<7> [189.965126] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: yes
<7> [189.965327] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [189.966436] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [189.966638] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [189.967592] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [189.967596] [drm] DisplayID checksum invalid, remainder is 248
<7> [189.967599] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [189.967603] [drm] DisplayID checksum invalid, remainder is 248
<7> [189.967606] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [189.967610] [drm] DisplayID checksum invalid, remainder is 248
<7> [189.967644] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes :
<7> [189.967649] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [189.967793] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:245:DP-1] EDID override reset
<7> [189.967815] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1]
<7> [189.967821] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1]
<7> [189.968125] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1] disconnected
<7> [189.968262] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:258:DP-2] EDID override reset
<7> [189.968283] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:258:DP-2]
<7> [189.968289] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:258:DP-2]
<7> [189.968584] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:258:DP-2] disconnected
<7> [189.968717] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:267:DP-3] EDID override reset
<7> [189.968738] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:DP-3]
<7> [189.968744] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:267:DP-3]
<7> [189.969050] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:DP-3] disconnected
<7> [189.969236] [drm:status_store] [CONNECTOR:275:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [189.969242] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [189.969249] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [189.969571] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [189.969608] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [189.969614] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [189.969927] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [189.970050] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:275:HDMI-A-1] EDID override reset
<7> [189.970071] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [189.970077] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [189.970386] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [189.970569] [drm:status_store] [CONNECTOR:281:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [189.970575] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2]
<7> [189.970582] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:281:HDMI-A-2]
<7> [189.970897] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2] disconnected
<7> [189.970933] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2]
<7> [189.970938] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:281:HDMI-A-2]
<7> [189.971249] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2] disconnected
<7> [189.971361] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:281:HDMI-A-2] EDID override reset
<7> [189.971381] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2]
<7> [189.971387] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:281:HDMI-A-2]
<7> [189.971683] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2] disconnected
<6> [189.972495] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [189.972646] [drm:status_store] [CONNECTOR:275:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [189.972652] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [189.972659] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [189.972972] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [189.973025] [drm:status_store] [CONNECTOR:281:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [189.973030] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2]
<7> [189.973051] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:281:HDMI-A-2]
<7> [189.973357] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2] disconnected
<7> [189.973407] [drm:status_store] [CONNECTOR:236:eDP-1] force updated from 0 to 0 or reprobing
<7> [189.973413] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1]
<7> [189.973419] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]
<7> [189.974623] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7> [189.975617] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [189.975821] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [189.976028] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [189.976285] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [189.976516] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<7> [189.976523] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [189.976529] [drm] DisplayID checksum invalid, remainder is 248
<7> [189.976532] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [189.976537] [drm] DisplayID checksum invalid, remainder is 248
<7> [189.976541] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [189.976547] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [189.976551] [drm] DisplayID checksum invalid, remainder is 248
<7> [189.976555] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor
<7> [189.976561] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [189.976566] [drm] DisplayID checksum invalid, remainder is 248
<7> [189.976569] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0
<7> [189.976575] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [189.976580] [drm] DisplayID checksum invalid, remainder is 248
<7> [189.976597] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: yes
<7> [189.976802] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [189.977984] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [189.978195] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [189.979164] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [189.979170] [drm] DisplayID checksum invalid, remainder is 248
<7> [189.979173] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [189.979178] [drm] DisplayID checksum invalid, remainder is 248
<7> [189.979181] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [189.979186] [drm] DisplayID checksum invalid, remainder is 248
<7> [189.979225] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes :
<7> [189.979230] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [189.979522] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [189.997812] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0]
<7> [189.997823] [drm:drm_client_modeset_probe]
<7> [189.997879] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1]
<7> [189.997888] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]
<7> [189.999161] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7> [190.000184] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [190.000414] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [190.000643] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [190.000866] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [190.001164] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<7> [190.001173] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [190.001179] [drm] DisplayID checksum invalid, remainder is 248
<7> [190.001183] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [190.001189] [drm] DisplayID checksum invalid, remainder is 248
<7> [190.001192] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [190.001199] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [190.001204] [drm] DisplayID checksum invalid, remainder is 248
<7> [190.001208] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor
<7> [190.001215] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [190.001220] [drm] DisplayID checksum invalid, remainder is 248
<7> [190.001224] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0
<7> [190.001231] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [190.001236] [drm] DisplayID checksum invalid, remainder is 248
<7> [190.001257] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: yes
<7> [190.001473] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [190.002670] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [190.002886] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [190.003921] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [190.003926] [drm] DisplayID checksum invalid, remainder is 248
<7> [190.003930] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [190.003934] [drm] DisplayID checksum invalid, remainder is 248
<7> [190.003938] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [190.003942] [drm] DisplayID checksum invalid, remainder is 248
<7> [190.003988] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes :
<7> [190.003994] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [190.004003] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1]
<7> [190.004011] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1]
<7> [190.004343] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1] disconnected
<7> [190.004351] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:258:DP-2]
<7> [190.004357] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:258:DP-2]
<7> [190.004664] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:258:DP-2] disconnected
<7> [190.004670] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:DP-3]
<7> [190.004677] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:267:DP-3]
<7> [190.004977] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:DP-3] disconnected
<7> [190.004983] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [190.004990] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [190.005359] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [190.005365] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2]
<7> [190.005371] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:281:HDMI-A-2]
<7> [190.005686] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2] disconnected
<7> [190.005692] [drm:drm_client_modeset_probe] connector 236 enabled? yes
<7> [190.005698] [drm:drm_client_modeset_probe] connector 245 enabled? no
<7> [190.005702] [drm:drm_client_modeset_probe] connector 258 enabled? no
<7> [190.005706] [drm:drm_client_modeset_probe] connector 267 enabled? no
<7> [190.005710] [drm:drm_client_modeset_probe] connector 275 enabled? no
<7> [190.005714] [drm:drm_client_modeset_probe] connector 281 enabled? no
<7> [190.005758] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [190.005773] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236
<7> [190.005778] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0
<7> [190.005782] [drm:drm_client_modeset_probe] found mode 2880x1800
<7> [190.005786] [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7> [190.005807] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0)
<6> [190.031332] Console: switching to colour frame buffer device 360x112
Created at 2024-02-26 01:27:12