igt@i915_pm_rpm@module-reload on fi-kbl-x1275@linus-v6.8-rc5 Test details

Detail	Value
Duration	26.77 seconds
Igt-Version	IGT-Version: 1.28-g21e9f1e49 (x86_64) (Linux: 6.8.0-rc5-linus-v6.8-rc5-gb401b621758e+ x86_64)
Out	Using IGT_SRANDOM=1708289840 for randomisation Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: 0000:00:02.0@ffff88810ba8b4b0 has 1/1 users at track_intel_runtime_pm_wakeref.part.0+0x30/0x60 [i915] __intel_display_power_put_async+0x3d/0x160 [i915] intel_atomic_commit_tail+0xaef/0xf80 [i915] intel_atomic_commit+0x321/0x370 [i915] drm_atomic_commit+0x95/0xc0 drm_atomic_helper_set_config+0x77/0xc0 drm_mode_setcrtc+0x1f7/0x740 drm_ioctl_kernel+0xab/0x100 drm_ioctl+0x223/0x430 __x64_sys_ioctl+0x7c/0xb0 do_syscall_64+0x72/0x140 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Starting subtest: module-reload Reloading i915 with disable_display=1 mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] Reloading i915 with mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: 0000:00:02.0@ffff8881113bb4b0 has 1/1 users at track_intel_runtime_pm_wakeref.part.0+0x30/0x60 [i915] __intel_display_power_put_async+0x3d/0x160 [i915] intel_dp_aux_xfer+0x4c9/0x6d0 [i915] intel_dp_aux_transfer+0x1dc/0x2a0 [i915] drm_dp_dpcd_access+0x6d/0x130 [drm_display_helper] drm_dp_dpcd_read+0xeb/0x100 [drm_display_helper] drm_dp_read_sink_count+0x2c/0x80 [drm_display_helper] intel_dp_get_dpcd+0x9c/0xc0 [i915] intel_dp_detect+0xe4/0x680 [i915] drm_helper_probe_detect_ctx+0x45/0x100 intel_hotplug_detect_connector+0x3e/0x100 [i915] i915_hpd_poll_init_work+0x178/0x220 [i915] process_scheduled_works+0x2de/0x530 worker_thread+0x18c/0x350 kthread+0x100/0x130 ret_from_fork+0x2f/0x50 Subtest module-reload: SUCCESS (26.765s)
Err	Starting subtest: module-reload Subtest module-reload: SUCCESS (26.765s)
Dmesg	<6> [145.059488] [IGT] i915_pm_rpm: executing <7> [145.064589] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [145.065290] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [145.065298] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [145.065786] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [145.065861] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [145.065866] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [145.066087] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [145.067613] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [145.068769] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [145.069581] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [145.069642] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [145.069647] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [145.070272] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [145.070407] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [145.070803] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [145.071012] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [145.071017] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [145.071128] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [145.075294] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [145.075298] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [145.075441] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [145.078969] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [145.078975] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [145.079134] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [145.079564] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [145.079569] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [145.080751] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [145.081890] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [145.082695] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [145.083121] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [145.083125] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [145.083566] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [145.083708] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [145.084126] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [145.084277] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [145.084281] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [145.084392] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [145.088660] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [145.088665] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [145.088788] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [145.089081] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [145.089085] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [145.089242] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [145.089257] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [145.089261] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [145.090448] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [145.091450] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [145.092281] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [145.092299] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [145.092303] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [145.092804] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [145.092918] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [145.093302] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [145.093469] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [145.093475] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [145.093620] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [145.097816] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [145.097820] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [145.097942] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [145.198638] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [146.166649] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [146.167205] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [146.167776] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [146.168919] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [156.146222] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [156.155236] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [156.180468] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [156.189767] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [156.190633] [drm:drm_mode_setcrtc] [CRTC:51:pipe A] <7> [156.190891] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [156.191307] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [156.192193] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [156.193985] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [156.194543] [drm:drm_mode_setcrtc] [CRTC:72:pipe B] <7> [156.194712] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [156.195244] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [156.197505] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [156.198323] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [156.199016] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [156.199645] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [156.199769] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [156.200152] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [156.200303] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [156.200307] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [156.200436] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [156.204791] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [156.204796] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [156.205026] [drm:drm_mode_setcrtc] [CRTC:93:pipe C] <7> [156.318737] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [156.318937] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [156.319083] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [156.319223] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [156.319851] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [156.320455] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [156.323384] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [156.406357] [IGT] i915_pm_rpm: starting subtest module-reload <7> [156.521499] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [156.530111] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [156.531026] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [156.531445] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [156.531614] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [156.532449] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [156.533185] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [156.533845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [156.534272] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [156.534704] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [156.535108] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [156.535666] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [156.537492] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [156.538331] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [156.539019] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [156.539516] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [156.539640] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [156.540037] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [156.540199] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [156.540204] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [156.540325] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [156.544570] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [156.544575] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [156.561582] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [156.615270] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <6> [156.858341] [IGT] Reloading i915 w/o display <7> [157.014138] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [157.014366] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [157.014623] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH <7> [157.014822] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [157.015117] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [157.015289] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz <7> [157.015963] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [157.016098] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [157.016209] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M <6> [157.016318] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [157.016321] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [157.016653] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [157.016674] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047 <7> [157.016823] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K <7> [157.017120] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018 <7> [157.017288] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [157.017526] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [157.017716] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [157.017857] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [157.021799] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [157.021959] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [157.022108] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [157.022255] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [157.022435] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [157.022590] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [157.022704] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [157.022817] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [157.022930] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [157.023042] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [157.023154] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [157.023264] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [157.023375] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [157.023534] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [157.023982] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [157.024141] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196 <7> [157.024299] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [157.024500] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [157.024699] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [157.024854] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [157.025011] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812) <7> [157.025166] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34) <7> [157.025321] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [157.025521] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [157.025755] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [157.025911] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [157.026065] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [157.026216] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [157.026420] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6 <7> [157.026653] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [157.026825] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [157.026980] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [157.027132] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [157.027285] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [157.027442] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [157.027629] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3 <7> [157.027781] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [157.027933] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3 <7> [157.028086] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [157.028248] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [157.028468] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [157.028654] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [157.028808] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [157.029303] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [157.029468] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [157.029712] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [157.029905] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [157.030058] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [157.030211] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [157.030405] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [157.030677] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [157.030831] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [157.030984] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [157.031136] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [157.031321] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <7> [157.031984] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [157.032145] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [157.032296] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [157.032308] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [157.032455] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [157.032869] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [157.033021] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <6> [157.033127] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [157.033168] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [157.033336] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [157.033509] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [157.033661] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [157.033804] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [157.033946] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [157.034122] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [157.034299] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [157.035970] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [157.037411] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [157.037716] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] Using AUX CH A (VBT) <7> [157.037964] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A] <7> [157.040467] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [157.040619] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [157.040776] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [157.040928] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static <7> [157.041087] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [157.041240] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [157.041403] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [157.041616] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [157.041768] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [157.041920] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0 <7> [157.042072] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1 <7> [157.042263] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0 <7> [157.042524] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [157.042662] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [157.042798] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [157.042933] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [157.043070] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [157.043275] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [157.043641] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on <7> [157.043808] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [157.044028] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [157.044187] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [157.044385] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [157.044643] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [157.257404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.268404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.279405] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.290405] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.301404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.312404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.323404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.334406] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.345404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.356404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.367404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.378405] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.389404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.400403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.411404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.422406] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.433403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.444403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.455405] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.466406] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.477404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.488404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.499404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.510406] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.521404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.532404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.543404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.554406] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.565404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.576403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.587406] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.598403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.598636] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <6> [157.598649] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP <7> [157.598708] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off <7> [157.598907] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [157.599136] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] Using AUX CH B (VBT) <7> [157.599292] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B] <7> [157.610573] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.621404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.632406] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.643403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.654403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.665404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.676403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.687402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.698403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.709404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.720404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.731403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.742403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.753404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.764403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.775402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.786403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.797404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.808405] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.819402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.830402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.841404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.852404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.863403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.874403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.885404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.896403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.907402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.918403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.929404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.940403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.951402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.951628] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX B/DDI B/PHY B: Too many retries, giving up. First error: -110 <7> [157.951639] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel <7> [157.962403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.973404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.984405] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.995402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.006403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.017404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.028404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.039402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.050402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.061403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.072405] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.083402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.094403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.105403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.116404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.127402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.138402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.149403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.160405] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.171402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.182403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.193405] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.204402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.215404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.226403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.237403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.248402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.259402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.270405] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.281404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.292402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.303403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.303611] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX B/DDI B/PHY B: Too many retries, giving up. First error: -110 <7> [158.303623] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [158.303784] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DDI C/PHY C] Using AUX CH C (VBT) <7> [158.303943] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C] <7> [158.304939] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel <7> [158.305963] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [158.306119] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C] <7> [158.306283] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:106:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [158.306702] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [158.306917] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [158.307126] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [158.307287] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [158.307466] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [158.307663] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [158.307823] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [158.307984] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [158.308144] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [158.308303] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [158.308484] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [158.308680] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [158.308843] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [158.308988] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A <7> [158.309133] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B <7> [158.309279] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C <7> [158.309479] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A <7> [158.309696] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A <7> [158.309843] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B <7> [158.309988] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C <7> [158.310151] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [158.310319] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [158.310501] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [158.310701] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [158.310905] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled <7> [158.311104] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled <7> [158.311278] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled <7> [158.311437] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [158.311619] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [158.311798] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [158.311978] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [158.312173] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [158.312322] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [158.312481] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [158.312663] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [158.312819] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [158.312967] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [158.313113] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [158.313257] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [158.313528] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [158.313739] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [158.313925] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [158.314080] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [158.314234] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [158.314381] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [158.314539] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [158.314749] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [158.314868] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [158.314995] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [158.315160] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 6 GT workarounds on global <7> [158.317276] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [158.317471] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [158.317656] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 14 context workarounds on rcs'0 <7> [158.328559] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [158.328699] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [158.328821] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [158.328941] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [158.329220] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [158.329533] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [158.329690] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [158.329854] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [158.330025] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [158.330193] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [158.333697] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [158.334809] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event <7> [158.335350] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [158.336350] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event <7> [158.336904] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event <6> [158.336970] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0 <7> [158.338850] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected <6> [158.350984] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [158.352787] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 <7> [158.353597] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [158.354674] i915 display info: display version: 9 <7> [158.354693] i915 display info: cursor_needs_physical: no <7> [158.354696] i915 display info: has_cdclk_crawl: no <7> [158.354699] i915 display info: has_cdclk_squash: no <7> [158.354701] i915 display info: has_ddi: yes <7> [158.354701] [drm:drm_client_modeset_probe] <7> [158.354705] i915 display info: has_dp_mst: yes <7> [158.354707] i915 display info: has_dsb: no <7> [158.354709] i915 display info: has_fpga_dbg: yes <7> [158.354712] i915 display info: has_gmch: no <7> [158.354714] i915 display info: has_hotplug: yes <7> [158.354717] i915 display info: has_hti: no <7> [158.354719] i915 display info: has_ipc: yes <7> [158.354722] i915 display info: has_overlay: no <7> [158.354724] i915 display info: has_psr: yes <7> [158.354727] i915 display info: has_psr_hw_tracking: yes <7> [158.354729] i915 display info: overlay_needs_physical: no <7> [158.354731] i915 display info: supports_tv: no <7> [158.354734] i915 display info: has_hdcp: yes <7> [158.354736] i915 display info: has_dmc: yes <7> [158.354738] i915 display info: has_dsc: no <7> [158.354747] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [158.354743] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [158.354757] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [158.354974] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] status updated from unknown to disconnected <7> [158.354990] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [158.354998] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [158.354991] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [158.355005] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [158.355212] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] status updated from unknown to disconnected <7> [158.355225] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [158.355231] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [158.355218] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [158.355238] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [158.355461] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected <7> [158.355473] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [158.355479] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [158.355483] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [158.355488] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [158.355492] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [158.355526] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [158.355538] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [158.355558] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [158.355457] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <6> [158.355568] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [158.356095] [drm:drm_client_modeset_probe] <7> [158.356118] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [158.356124] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [158.356163] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [158.356278] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [158.356282] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [158.356286] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [158.356385] i915 device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9 <7> [158.356389] i915 device info: graphics version: 9 <7> [158.356391] i915 device info: media version: 9 <7> [158.356405] i915 device info: graphics stepping: F0 <7> [158.356407] i915 device info: media stepping: F0 <7> [158.356409] i915 device info: display stepping: C0 <7> [158.356411] i915 device info: base die stepping: <7> [158.356413] i915 device info: gt: 2 <7> [158.356415] i915 device info: memory-regions: 0x21 <7> [158.356417] i915 device info: page-sizes: 0x11000 <7> [158.356420] i915 device info: platform: KABYLAKE <7> [158.356422] i915 device info: ppgtt-size: 48 <7> [158.356424] i915 device info: ppgtt-type: 2 <7> [158.356426] i915 device info: dma_mask_size: 39 <7> [158.356428] i915 device info: is_mobile: no <7> [158.356430] i915 device info: is_lp: no <7> [158.356432] i915 device info: require_force_probe: no <7> [158.356434] i915 device info: is_dgfx: no <7> [158.356436] i915 device info: has_64bit_reloc: yes <7> [158.356438] i915 device info: has_64k_pages: no <7> [158.356450] i915 device info: gpu_reset_clobbers_display: no <7> [158.356452] i915 device info: has_reset_engine: yes <7> [158.356455] i915 device info: has_3d_pipeline: yes <7> [158.356457] i915 device info: has_flat_ccs: no <7> [158.356460] i915 device info: has_global_mocs: no <7> [158.356462] i915 device info: has_gmd_id: no <7> [158.356465] i915 device info: has_gt_uc: yes <7> [158.356467] i915 device info: has_heci_pxp: no <7> [158.356469] i915 device info: has_heci_gscfi: no <7> [158.356471] i915 device info: has_guc_deprivilege: no <7> [158.356474] i915 device info: has_guc_tlb_invalidation: no <7> [158.356476] i915 device info: has_l3_ccs_read: no <7> [158.356479] i915 device info: has_l3_dpf: no <7> [158.356481] i915 device info: has_llc: yes <7> [158.356484] i915 device info: has_logical_ring_contexts: yes <7> [158.356486] i915 device info: has_logical_ring_elsq: no <7> [158.356489] i915 device info: has_media_ratio_mode: no <7> [158.356491] i915 device info: has_mslice_steering: no <7> [158.356494] i915 device info: has_oa_bpc_reporting: no <7> [158.356496] i915 device info: has_oa_slice_contrib_limits: no <7> [158.356498] i915 device info: has_oam: no <7> [158.356501] i915 device info: has_one_eu_per_fuse_bit: no <7> [158.356503] i915 device info: has_pxp: no <7> [158.356505] i915 device info: has_rc6: yes <7> [158.356508] i915 device info: has_rc6p: no <7> [158.356510] i915 device info: has_rps: yes <7> [158.356513] i915 device info: has_runtime_pm: yes <7> [158.356515] i915 device info: has_snoop: no <7> [158.356518] i915 device info: has_coherent_ggtt: yes <7> [158.356520] i915 device info: tuning_thread_rr_after_dep: no <7> [158.356523] i915 device info: unfenced_needs_alignment: no <7> [158.356525] i915 device info: hws_needs_physical: no <7> [158.356528] i915 device info: has_pooled_eu: no <7> [158.356530] i915 device info: rawclk rate: 24000 kHz <7> [158.356533] i915 device info: iommu: enabled <7> [158.356536] i915 device info: available engines: 40403 <7> [158.356539] i915 device info: slice total: 1, mask=0001 <7> [158.356541] i915 device info: subslice total: 3 <7> [158.356544] i915 device info: slice0: 3 subslices, mask=00000007 <7> [158.356547] i915 device info: slice1: 0 subslices, mask=00000000 <7> [158.356550] i915 device info: slice2: 0 subslices, mask=00000000 <7> [158.356553] i915 device info: EU total: 24 <7> [158.356555] i915 device info: EU per subslice: 8 <7> [158.356558] i915 device info: has slice power gating: no <7> [158.356560] i915 device info: has subslice power gating: no <7> [158.356563] i915 device info: has EU power gating: yes <6> [158.356566] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [158.356569] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [158.356571] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [158.356672] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [158.356680] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [158.356687] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [158.356835] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [158.356839] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [158.356842] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [158.356844] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [158.356847] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [158.356875] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [158.356885] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [158.356904] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [158.356913] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [158.360256] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [158.510632] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [158.511794] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [158.512376] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [158.512983] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [158.513714] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [169.001538] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [169.010441] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [169.422880] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [169.432653] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [169.433951] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [169.434673] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [169.435060] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [169.435457] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [169.435817] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [169.436668] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [169.440826] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [169.654454] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [169.659369] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [169.659644] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [169.660003] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [169.660750] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [169.661304] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [169.661700] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [169.661934] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [169.662165] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [169.662410] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [169.662661] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [169.662868] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [169.663071] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [169.685849] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [169.730422] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <6> [169.927157] [IGT] Reloading i915 as normal <7> [170.058039] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [170.058261] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [170.058505] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH <7> [170.058729] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [170.058975] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [170.059113] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz <7> [170.059772] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [170.059907] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [170.060018] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M <6> [170.060127] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [170.060130] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [170.060346] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [170.060361] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047 <7> [170.060535] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K <7> [170.060875] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018 <7> [170.061042] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [170.061185] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [170.061326] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [170.061478] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [170.065458] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [170.065659] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [170.065799] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [170.065937] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [170.066076] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [170.066182] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [170.066283] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [170.066382] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [170.066549] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [170.066747] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [170.066912] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [170.067023] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [170.067136] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [170.067236] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [170.067944] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [170.068115] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196 <7> [170.068284] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [170.068469] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [170.068636] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [170.068794] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [170.068950] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812) <7> [170.069106] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34) <7> [170.069262] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [170.069482] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [170.069666] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [170.069823] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [170.069975] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [170.070125] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [170.070311] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6 <7> [170.070528] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [170.070780] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [170.070964] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [170.071119] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [170.071271] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [170.071431] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [170.071597] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3 <7> [170.071748] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [170.071900] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3 <7> [170.072052] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [170.072215] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [170.072408] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [170.072592] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [170.072747] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [170.073247] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [170.073415] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [170.073592] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [170.073792] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [170.073945] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [170.074097] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [170.074352] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [170.074652] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [170.074846] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [170.075000] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [170.075153] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [170.075341] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <7> [170.075822] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [170.076247] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [170.076897] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [170.077057] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [170.077209] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [170.077387] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [170.077409] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [170.077673] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [170.077908] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <6> [170.078105] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [170.078136] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [170.078281] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [170.078460] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [170.078621] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [170.078763] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [170.078904] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [170.080188] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [170.081682] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [170.081997] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] Using AUX CH A (VBT) <7> [170.082228] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A] <7> [170.085206] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [170.085369] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [170.085544] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [170.085775] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static <7> [170.085933] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [170.086087] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [170.086237] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [170.086399] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [170.086629] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [170.086781] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0 <7> [170.086933] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1 <7> [170.087123] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0 <7> [170.087330] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [170.087525] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [170.087733] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [170.087867] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [170.088037] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [170.088242] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [170.088594] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on <7> [170.088760] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [170.088976] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [170.089134] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [170.089329] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [170.089563] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [170.305402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.316402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.327404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.339401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.350401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.361402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.372401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.383401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.394401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.405403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.416401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.427401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.438402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.449400] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.460401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.471403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.482401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.493401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.504401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.515402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.526400] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.537400] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.548401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.559403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.570401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.581401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.592401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.603403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.614401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.625400] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.636401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.647403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.647621] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <6> [170.647636] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP <7> [170.647699] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off <7> [170.647902] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [170.648142] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] Using AUX CH B (VBT) <7> [170.648302] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B] <7> [170.659403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.670402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.681402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.692402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.703403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.714402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.725402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.736404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.747403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.758402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.769402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.780401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.791403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.802402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.813403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.824402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.835403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.846401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.857402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.868402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.879403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.890402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.901402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.912402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.923403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.934402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.945402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.956401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.967403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.978402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.989402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.000403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.000608] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX B/DDI B/PHY B: Too many retries, giving up. First error: -110 <7> [171.000620] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel <7> [171.011404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.022401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.033402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.044402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.055404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.066402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.077402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.088401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.099403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.110401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.121401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.132401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.143404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.154401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.165401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.176402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.187403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.198401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.209401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.220402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.231400] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.242400] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.253400] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.264402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.275400] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.286400] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.297400] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.308401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.319400] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.330400] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.341401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.352401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.352627] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX B/DDI B/PHY B: Too many retries, giving up. First error: -110 <7> [171.352639] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [171.352796] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DDI C/PHY C] Using AUX CH C (VBT) <7> [171.352950] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C] <7> [171.354046] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel <7> [171.355035] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [171.355190] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C] <7> [171.355334] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:106:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [171.355740] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [171.355953] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [171.356163] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [171.356324] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [171.356492] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [171.356687] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [171.356847] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [171.357007] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [171.357201] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [171.357360] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [171.357562] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [171.357722] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [171.357883] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [171.358027] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A <7> [171.358173] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B <7> [171.358317] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C <7> [171.358483] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A <7> [171.358629] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A <7> [171.358774] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B <7> [171.358919] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C <7> [171.359079] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [171.359248] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [171.359422] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [171.359586] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [171.359789] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled <7> [171.359966] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled <7> [171.360140] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled <7> [171.360287] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [171.360507] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [171.360654] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [171.360797] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [171.360954] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [171.361102] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [171.361282] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [171.361433] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [171.361625] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [171.361774] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [171.361919] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [171.362063] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [171.362265] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [171.362427] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [171.362581] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [171.362733] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [171.362887] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [171.363034] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [171.363177] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [171.363350] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [171.363475] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [171.363602] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [171.363746] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 6 GT workarounds on global <7> [171.365665] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [171.365813] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [171.365954] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 14 context workarounds on rcs'0 <7> [171.377158] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [171.377284] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [171.377405] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [171.377516] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [171.377788] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [171.378070] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [171.378216] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [171.378357] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [171.378504] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [171.378660] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [171.382189] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [171.383158] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event <7> [171.383743] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [171.384698] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event <7> [171.384990] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event <6> [171.385029] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0 <7> [171.386321] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected <6> [171.399535] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [171.401384] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8 <7> [171.402145] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [171.403224] i915 display info: display version: 9 <7> [171.403228] i915 display info: cursor_needs_physical: no <7> [171.403229] [drm:drm_client_modeset_probe] <7> [171.403231] i915 display info: has_cdclk_crawl: no <7> [171.403234] i915 display info: has_cdclk_squash: no <7> [171.403237] i915 display info: has_ddi: yes <7> [171.403239] i915 display info: has_dp_mst: yes <7> [171.403242] i915 display info: has_dsb: no <7> [171.403244] i915 display info: has_fpga_dbg: yes <7> [171.403247] i915 display info: has_gmch: no <7> [171.403249] i915 display info: has_hotplug: yes <7> [171.403251] i915 display info: has_hti: no <7> [171.403253] i915 display info: has_ipc: yes <7> [171.403255] i915 display info: has_overlay: no <7> [171.403258] i915 display info: has_psr: yes <7> [171.403260] i915 display info: has_psr_hw_tracking: yes <7> [171.403263] i915 display info: overlay_needs_physical: no <7> [171.403266] i915 display info: supports_tv: no <7> [171.403268] i915 display info: has_hdcp: yes <7> [171.403270] i915 display info: has_dmc: yes <7> [171.403272] i915 display info: has_dsc: no <7> [171.403272] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [171.403281] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [171.403277] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [171.403554] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [171.403782] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [171.404007] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [171.404422] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] status updated from unknown to disconnected <7> [171.404439] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [171.404447] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [171.404454] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [171.404854] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [171.405085] i915 device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9 <7> [171.405090] i915 device info: graphics version: 9 <7> [171.405093] i915 device info: media version: 9 <7> [171.405095] i915 device info: graphics stepping: F0 <7> [171.405098] i915 device info: media stepping: F0 <7> [171.405100] i915 device info: display stepping: C0 <7> [171.405103] i915 device info: base die stepping: <7> [171.405106] i915 device info: gt: 2 <7> [171.405108] i915 device info: memory-regions: 0x21 <7> [171.405111] i915 device info: page-sizes: 0x11000 <7> [171.405114] i915 device info: platform: KABYLAKE <7> [171.405116] i915 device info: ppgtt-size: 48 <7> [171.405119] i915 device info: ppgtt-type: 2 <7> [171.405121] i915 device info: dma_mask_size: 39 <7> [171.405123] i915 device info: is_mobile: no <7> [171.405126] i915 device info: is_lp: no <7> [171.405129] i915 device info: require_force_probe: no <7> [171.405131] i915 device info: is_dgfx: no <7> [171.405134] i915 device info: has_64bit_reloc: yes <7> [171.405137] i915 device info: has_64k_pages: no <7> [171.405139] i915 device info: gpu_reset_clobbers_display: no <7> [171.405142] i915 device info: has_reset_engine: yes <7> [171.405144] i915 device info: has_3d_pipeline: yes <7> [171.405147] i915 device info: has_flat_ccs: no <7> [171.405149] i915 device info: has_global_mocs: no <7> [171.405152] i915 device info: has_gmd_id: no <7> [171.405154] i915 device info: has_gt_uc: yes <7> [171.405157] i915 device info: has_heci_pxp: no <7> [171.405160] i915 device info: has_heci_gscfi: no <7> [171.405162] i915 device info: has_guc_deprivilege: no <7> [171.405165] i915 device info: has_guc_tlb_invalidation: no <7> [171.405167] i915 device info: has_l3_ccs_read: no <7> [171.405170] i915 device info: has_l3_dpf: no <7> [171.405173] i915 device info: has_llc: yes <7> [171.405175] i915 device info: has_logical_ring_contexts: yes <7> [171.405178] i915 device info: has_logical_ring_elsq: no <7> [171.405180] i915 device info: has_media_ratio_mode: no <7> [171.405182] i915 device info: has_mslice_steering: no <7> [171.405185] i915 device info: has_oa_bpc_reporting: no <7> [171.405188] i915 device info: has_oa_slice_contrib_limits: no <7> [171.405190] i915 device info: has_oam: no <7> [171.405193] i915 device info: has_one_eu_per_fuse_bit: no <7> [171.405195] i915 device info: has_pxp: no <7> [171.405198] i915 device info: has_rc6: yes <7> [171.405200] i915 device info: has_rc6p: no <7> [171.405202] i915 device info: has_rps: yes <7> [171.405205] i915 device info: has_runtime_pm: yes <7> [171.405207] i915 device info: has_snoop: no <7> [171.405209] i915 device info: has_coherent_ggtt: yes <7> [171.405212] i915 device info: tuning_thread_rr_after_dep: no <7> [171.405214] i915 device info: unfenced_needs_alignment: no <7> [171.405217] i915 device info: hws_needs_physical: no <7> [171.405220] i915 device info: has_pooled_eu: no <7> [171.405222] i915 device info: rawclk rate: 24000 kHz <7> [171.405225] i915 device info: iommu: enabled <7> [171.405228] i915 device info: available engines: 40403 <7> [171.405230] i915 device info: slice total: 1, mask=0001 <7> [171.405234] i915 device info: subslice total: 3 <7> [171.405236] i915 device info: slice0: 3 subslices, mask=00000007 <7> [171.405239] i915 device info: slice1: 0 subslices, mask=00000000 <7> [171.405242] i915 device info: slice2: 0 subslices, mask=00000000 <7> [171.405245] i915 device info: EU total: 24 <7> [171.405248] i915 device info: EU per subslice: 8 <7> [171.405250] i915 device info: has slice power gating: no <7> [171.405253] i915 device info: has subslice power gating: no <7> [171.405255] i915 device info: has EU power gating: yes <6> [171.405258] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [171.405261] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [171.405264] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [171.405938] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [171.406848] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [171.407619] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] status updated from unknown to disconnected <7> [171.407636] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [171.407644] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [171.407652] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [171.408599] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [171.408824] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [171.409318] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [171.409610] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [171.409631] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [171.409832] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [171.414622] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [171.414630] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [171.414866] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected <7> [171.414881] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [171.414887] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [171.414892] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [171.414897] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [171.414902] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [171.414940] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [171.414951] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [171.414972] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [171.414982] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [171.415714] [drm:drm_client_modeset_probe] <7> [171.415740] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [171.415746] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [171.416019] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [171.416024] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [171.416028] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [171.418236] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [171.419195] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [171.419582] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [171.420354] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [171.420364] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [171.420372] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [171.421167] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [171.421350] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [171.421802] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [171.421961] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [171.421966] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [171.422081] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [171.426308] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [171.426315] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [171.426506] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [171.426511] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [171.426515] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [171.426518] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [171.426535] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [171.426560] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [171.426567] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [171.426727] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [171.426734] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [171.426745] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [171.426798] [drm:drm_client_modeset_probe] <7> [171.426736] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [171.427068] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [171.427075] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [171.427081] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [171.427247] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [171.427252] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [171.427256] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [171.428586] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [171.429760] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [171.430608] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [171.430614] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [171.430618] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [171.431074] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [171.431203] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [171.431624] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [171.431778] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [171.431782] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [171.431893] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [171.436292] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [171.436298] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [171.436504] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [171.436532] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [171.436537] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [171.436541] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [171.436545] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [171.436575] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [171.436582] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [171.436595] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [171.436602] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [171.436692] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [171.436700] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [171.438268] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [171.439181] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [171.440072] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [171.440164] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [171.440170] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [171.440915] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [171.441088] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [171.441565] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [171.441818] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [171.441823] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [171.441988] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [171.446646] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [171.446651] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [171.446775] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [171.449649] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [171.449654] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [171.449814] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [171.450221] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [171.450225] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [171.451484] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [171.452481] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [171.453258] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [171.453869] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [171.453874] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [171.454285] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [171.454412] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [171.454968] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [171.455189] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [171.455195] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [171.455358] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [171.459676] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [171.459683] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [171.459865] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [171.460331] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [171.460337] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [171.460580] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [171.460633] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [171.460651] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [171.461952] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [171.462820] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [171.463472] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [171.463499] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [171.463505] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [171.464000] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [171.464166] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [171.464599] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [171.464807] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [171.464813] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [171.464977] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [171.469250] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [171.469256] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [171.469451] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [171.662533] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [171.662900] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [171.663058] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [171.663197] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [171.663807] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.003817] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.013434] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.528255] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.534215] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.534805] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.535667] [drm:drm_mode_setcrtc] [CRTC:51:pipe A] <7> [182.535623] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.536429] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.537127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.537773] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.538378] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.540452] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.541634] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.542572] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.543210] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.543338] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.543742] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.543908] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.543913] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.544025] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.548119] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.548124] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.548540] [drm:drm_mode_setcrtc] [CRTC:72:pipe B] <7> [182.548710] [drm:drm_mode_setcrtc] [CRTC:93:pipe C] <7> [182.646558] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.664536] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.664801] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.665028] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.665734] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.666517] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.670405] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.865526] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.874174] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.874783] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.875189] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.875974] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.876785] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.877465] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.878072] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.878334] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [182.878598] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [182.878835] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [182.879117] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [182.880493] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.881323] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.882019] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.882578] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.882802] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.883283] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.883551] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.883560] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.883815] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.888065] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.888070] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.904671] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [182.945320] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <6> [183.171184] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS <6> [183.171225] [IGT] i915_pm_rpm: exiting, ret=0

<6> [145.059488] [IGT] i915_pm_rpm: executing

<7> [145.064589] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [145.065290] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [145.065298] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [145.065786] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [145.065861] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [145.065866] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [145.066087] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [145.067613] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [145.068769] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [145.069581] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [145.069642] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [145.069647] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [145.070272] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [145.070407] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [145.070803] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [145.071012] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [145.071017] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [145.071128] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [145.075294] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [145.075298] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [145.075441] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [145.078969] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [145.078975] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [145.079134] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [145.079564] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [145.079569] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [145.080751] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [145.081890] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [145.082695] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [145.083121] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [145.083125] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [145.083566] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [145.083708] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [145.084126] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [145.084277] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [145.084281] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [145.084392] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [145.088660] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [145.088665] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [145.088788] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [145.089081] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [145.089085] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [145.089242] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [145.089257] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [145.089261] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [145.090448] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [145.091450] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [145.092281] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [145.092299] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [145.092303] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [145.092804] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [145.092918] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [145.093302] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [145.093469] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [145.093475] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [145.093620] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [145.097816] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [145.097820] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [145.097942] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [145.198638] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [146.166649] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [146.167205] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [146.167776] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [146.168919] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [156.146222] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [156.155236] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [156.180468] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [156.189767] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [156.190633] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]

<7> [156.190891] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [156.191307] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [156.192193] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [156.193985] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [156.194543] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]

<7> [156.194712] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [156.195244] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [156.197505] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [156.198323] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [156.199016] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [156.199645] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [156.199769] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [156.200152] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [156.200303] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [156.200307] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [156.200436] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [156.204791] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [156.204796] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [156.205026] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]

<7> [156.318737] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [156.318937] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [156.319083] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [156.319223] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [156.319851] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [156.320455] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [156.323384] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [156.406357] [IGT] i915_pm_rpm: starting subtest module-reload

<7> [156.521499] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [156.530111] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [156.531026] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [156.531445] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [156.531614] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [156.532449] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [156.533185] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [156.533845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [156.534272] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [156.534704] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [156.535108] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [156.535666] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [156.537492] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [156.538331] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [156.539019] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [156.539516] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [156.539640] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [156.540037] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [156.540199] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [156.540204] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [156.540325] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [156.544570] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [156.544575] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [156.561582] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [156.615270] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<6> [156.858341] [IGT] Reloading i915 w/o display

<7> [157.014138] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [157.014366] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [157.014623] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH

<7> [157.014822] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [157.015117] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [157.015289] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz

<7> [157.015963] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [157.016098] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [157.016209] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M

<6> [157.016318] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [157.016321] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [157.016653] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [157.016674] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047

<7> [157.016823] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K

<7> [157.017120] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018

<7> [157.017288] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [157.017526] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [157.017716] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [157.017857] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [157.021799] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [157.021959] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [157.022108] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [157.022255] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [157.022435] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [157.022590] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [157.022704] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [157.022817] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [157.022930] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [157.023042] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [157.023154] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [157.023264] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [157.023375] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [157.023534] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [157.023982] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [157.024141] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196

<7> [157.024299] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [157.024500] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [157.024699] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [157.024854] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [157.025011] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812)

<7> [157.025166] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34)

<7> [157.025321] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [157.025521] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [157.025755] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [157.025911] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [157.026065] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [157.026216] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [157.026420] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6

<7> [157.026653] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [157.026825] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [157.026980] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [157.027132] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [157.027285] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [157.027442] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [157.027629] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3

<7> [157.027781] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [157.027933] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3

<7> [157.028086] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [157.028248] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [157.028468] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [157.028654] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [157.028808] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [157.029303] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [157.029468] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [157.029712] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [157.029905] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [157.030058] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [157.030211] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [157.030405] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [157.030677] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [157.030831] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [157.030984] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [157.031136] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [157.031321] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<7> [157.031984] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [157.032145] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [157.032296] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [157.032308] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [157.032455] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [157.032869] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [157.033021] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<6> [157.033127] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [157.033168] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [157.033336] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [157.033509] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [157.033661] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [157.033804] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [157.033946] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [157.034122] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [157.034299] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [157.035970] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [157.037411] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [157.037716] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] Using AUX CH A (VBT)

<7> [157.037964] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A]

<7> [157.040467] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [157.040619] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [157.040776] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [157.040928] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static

<7> [157.041087] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [157.041240] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [157.041403] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [157.041616] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [157.041768] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [157.041920] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0

<7> [157.042072] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1

<7> [157.042263] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0

<7> [157.042524] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [157.042662] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [157.042798] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [157.042933] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [157.043070] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [157.043275] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [157.043641] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on

<7> [157.043808] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [157.044028] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [157.044187] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [157.044385] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [157.044643] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [157.257404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.268404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.279405] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.290405] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.301404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.312404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.323404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.334406] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.345404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.356404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.367404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.378405] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.389404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.400403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.411404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.422406] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.433403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.444403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.455405] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.466406] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.477404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.488404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.499404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.510406] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.521404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.532404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.543404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.554406] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.565404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.576403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.587406] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.598403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.598636] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110

<6> [157.598649] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP

<7> [157.598708] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off

<7> [157.598907] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [157.599136] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] Using AUX CH B (VBT)

<7> [157.599292] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B]

<7> [157.610573] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.621404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.632406] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.643403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.654403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.665404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.676403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.687402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.698403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.709404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.720404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.731403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.742403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.753404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.764403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.775402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.786403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.797404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.808405] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.819402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.830402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.841404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.852404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.863403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.874403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.885404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.896403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.907402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.918403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.929404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.940403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.951402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.951628] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX B/DDI B/PHY B: Too many retries, giving up. First error: -110

<7> [157.951639] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel

<7> [157.962403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.973404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.984405] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.995402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.006403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.017404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.028404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.039402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.050402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.061403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.072405] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.083402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.094403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.105403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.116404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.127402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.138402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.149403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.160405] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.171402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.182403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.193405] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.204402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.215404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.226403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.237403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.248402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.259402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.270405] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.281404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.292402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.303403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.303611] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX B/DDI B/PHY B: Too many retries, giving up. First error: -110

<7> [158.303623] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [158.303784] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DDI C/PHY C] Using AUX CH C (VBT)

<7> [158.303943] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C]

<7> [158.304939] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel

<7> [158.305963] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [158.306119] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C]

<7> [158.306283] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:106:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [158.306702] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [158.306917] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [158.307126] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [158.307287] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [158.307466] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [158.307663] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [158.307823] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [158.307984] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [158.308144] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [158.308303] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [158.308484] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [158.308680] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [158.308843] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [158.308988] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A

<7> [158.309133] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B

<7> [158.309279] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C

<7> [158.309479] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [158.309696] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A

<7> [158.309843] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B

<7> [158.309988] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C

<7> [158.310151] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [158.310319] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [158.310501] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [158.310701] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [158.310905] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled

<7> [158.311104] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled

<7> [158.311278] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled

<7> [158.311437] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [158.311619] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [158.311798] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [158.311978] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [158.312173] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [158.312322] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [158.312481] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [158.312663] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [158.312819] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [158.312967] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [158.313113] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [158.313257] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [158.313528] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [158.313739] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [158.313925] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [158.314080] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [158.314234] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [158.314381] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [158.314539] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [158.314749] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [158.314868] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [158.314995] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [158.315160] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 6 GT workarounds on global

<7> [158.317276] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [158.317471] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [158.317656] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 14 context workarounds on rcs'0

<7> [158.328559] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [158.328699] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [158.328821] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [158.328941] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [158.329220] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [158.329533] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [158.329690] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [158.329854] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [158.330025] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [158.330193] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [158.333697] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [158.334809] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event

<7> [158.335350] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [158.336350] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event

<7> [158.336904] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event

<6> [158.336970] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0

<7> [158.338850] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected

<6> [158.350984] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [158.352787] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7

<7> [158.353597] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [158.354674] i915 display info: display version: 9

<7> [158.354693] i915 display info: cursor_needs_physical: no

<7> [158.354696] i915 display info: has_cdclk_crawl: no

<7> [158.354699] i915 display info: has_cdclk_squash: no

<7> [158.354701] i915 display info: has_ddi: yes

<7> [158.354701] [drm:drm_client_modeset_probe]

<7> [158.354705] i915 display info: has_dp_mst: yes

<7> [158.354707] i915 display info: has_dsb: no

<7> [158.354709] i915 display info: has_fpga_dbg: yes

<7> [158.354712] i915 display info: has_gmch: no

<7> [158.354714] i915 display info: has_hotplug: yes

<7> [158.354717] i915 display info: has_hti: no

<7> [158.354719] i915 display info: has_ipc: yes

<7> [158.354722] i915 display info: has_overlay: no

<7> [158.354724] i915 display info: has_psr: yes

<7> [158.354727] i915 display info: has_psr_hw_tracking: yes

<7> [158.354729] i915 display info: overlay_needs_physical: no

<7> [158.354731] i915 display info: supports_tv: no

<7> [158.354734] i915 display info: has_hdcp: yes

<7> [158.354736] i915 display info: has_dmc: yes

<7> [158.354738] i915 display info: has_dsc: no

<7> [158.354747] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [158.354743] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [158.354757] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [158.354974] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] status updated from unknown to disconnected

<7> [158.354990] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [158.354998] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [158.354991] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [158.355005] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [158.355212] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] status updated from unknown to disconnected

<7> [158.355225] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [158.355231] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [158.355218] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [158.355238] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [158.355461] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected

<7> [158.355473] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [158.355479] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [158.355483] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [158.355488] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [158.355492] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [158.355526] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [158.355538] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [158.355558] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [158.355457] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<6> [158.355568] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [158.356095] [drm:drm_client_modeset_probe]

<7> [158.356118] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [158.356124] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [158.356163] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [158.356278] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [158.356282] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [158.356286] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [158.356385] i915 device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9

<7> [158.356389] i915 device info: graphics version: 9

<7> [158.356391] i915 device info: media version: 9

<7> [158.356405] i915 device info: graphics stepping: F0

<7> [158.356407] i915 device info: media stepping: F0

<7> [158.356409] i915 device info: display stepping: C0

<7> [158.356411] i915 device info: base die stepping: **

<7> [158.356413] i915 device info: gt: 2

<7> [158.356415] i915 device info: memory-regions: 0x21

<7> [158.356417] i915 device info: page-sizes: 0x11000

<7> [158.356420] i915 device info: platform: KABYLAKE

<7> [158.356422] i915 device info: ppgtt-size: 48

<7> [158.356424] i915 device info: ppgtt-type: 2

<7> [158.356426] i915 device info: dma_mask_size: 39

<7> [158.356428] i915 device info: is_mobile: no

<7> [158.356430] i915 device info: is_lp: no

<7> [158.356432] i915 device info: require_force_probe: no

<7> [158.356434] i915 device info: is_dgfx: no

<7> [158.356436] i915 device info: has_64bit_reloc: yes

<7> [158.356438] i915 device info: has_64k_pages: no

<7> [158.356450] i915 device info: gpu_reset_clobbers_display: no

<7> [158.356452] i915 device info: has_reset_engine: yes

<7> [158.356455] i915 device info: has_3d_pipeline: yes

<7> [158.356457] i915 device info: has_flat_ccs: no

<7> [158.356460] i915 device info: has_global_mocs: no

<7> [158.356462] i915 device info: has_gmd_id: no

<7> [158.356465] i915 device info: has_gt_uc: yes

<7> [158.356467] i915 device info: has_heci_pxp: no

<7> [158.356469] i915 device info: has_heci_gscfi: no

<7> [158.356471] i915 device info: has_guc_deprivilege: no

<7> [158.356474] i915 device info: has_guc_tlb_invalidation: no

<7> [158.356476] i915 device info: has_l3_ccs_read: no

<7> [158.356479] i915 device info: has_l3_dpf: no

<7> [158.356481] i915 device info: has_llc: yes

<7> [158.356484] i915 device info: has_logical_ring_contexts: yes

<7> [158.356486] i915 device info: has_logical_ring_elsq: no

<7> [158.356489] i915 device info: has_media_ratio_mode: no

<7> [158.356491] i915 device info: has_mslice_steering: no

<7> [158.356494] i915 device info: has_oa_bpc_reporting: no

<7> [158.356496] i915 device info: has_oa_slice_contrib_limits: no

<7> [158.356498] i915 device info: has_oam: no

<7> [158.356501] i915 device info: has_one_eu_per_fuse_bit: no

<7> [158.356503] i915 device info: has_pxp: no

<7> [158.356505] i915 device info: has_rc6: yes

<7> [158.356508] i915 device info: has_rc6p: no

<7> [158.356510] i915 device info: has_rps: yes

<7> [158.356513] i915 device info: has_runtime_pm: yes

<7> [158.356515] i915 device info: has_snoop: no

<7> [158.356518] i915 device info: has_coherent_ggtt: yes

<7> [158.356520] i915 device info: tuning_thread_rr_after_dep: no

<7> [158.356523] i915 device info: unfenced_needs_alignment: no

<7> [158.356525] i915 device info: hws_needs_physical: no

<7> [158.356528] i915 device info: has_pooled_eu: no

<7> [158.356530] i915 device info: rawclk rate: 24000 kHz

<7> [158.356533] i915 device info: iommu: enabled

<7> [158.356536] i915 device info: available engines: 40403

<7> [158.356539] i915 device info: slice total: 1, mask=0001

<7> [158.356541] i915 device info: subslice total: 3

<7> [158.356544] i915 device info: slice0: 3 subslices, mask=00000007

<7> [158.356547] i915 device info: slice1: 0 subslices, mask=00000000

<7> [158.356550] i915 device info: slice2: 0 subslices, mask=00000000

<7> [158.356553] i915 device info: EU total: 24

<7> [158.356555] i915 device info: EU per subslice: 8

<7> [158.356558] i915 device info: has slice power gating: no

<7> [158.356560] i915 device info: has subslice power gating: no

<7> [158.356563] i915 device info: has EU power gating: yes

<6> [158.356566] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [158.356569] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [158.356571] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [158.356672] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [158.356680] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [158.356687] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [158.356835] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [158.356839] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [158.356842] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [158.356844] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [158.356847] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [158.356875] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [158.356885] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [158.356904] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [158.356913] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [158.360256] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [158.510632] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [158.511794] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [158.512376] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [158.512983] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [158.513714] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [169.001538] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [169.010441] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [169.422880] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [169.432653] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [169.433951] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [169.434673] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [169.435060] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [169.435457] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [169.435817] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [169.436668] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [169.440826] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [169.654454] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [169.659369] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [169.659644] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [169.660003] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [169.660750] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [169.661304] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [169.661700] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [169.661934] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [169.662165] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [169.662410] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [169.662661] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [169.662868] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [169.663071] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [169.685849] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [169.730422] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<6> [169.927157] [IGT] Reloading i915 as normal

<7> [170.058039] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [170.058261] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [170.058505] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH

<7> [170.058729] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [170.058975] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [170.059113] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz

<7> [170.059772] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [170.059907] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [170.060018] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M

<6> [170.060127] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [170.060130] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [170.060346] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [170.060361] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047

<7> [170.060535] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K

<7> [170.060875] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018

<7> [170.061042] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [170.061185] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [170.061326] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [170.061478] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [170.065458] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [170.065659] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [170.065799] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [170.065937] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [170.066076] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [170.066182] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [170.066283] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [170.066382] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [170.066549] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [170.066747] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [170.066912] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [170.067023] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [170.067136] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [170.067236] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [170.067944] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [170.068115] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196

<7> [170.068284] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [170.068469] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [170.068636] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [170.068794] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [170.068950] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812)

<7> [170.069106] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34)

<7> [170.069262] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [170.069482] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [170.069666] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [170.069823] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [170.069975] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [170.070125] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [170.070311] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6

<7> [170.070528] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [170.070780] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [170.070964] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [170.071119] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [170.071271] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [170.071431] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [170.071597] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3

<7> [170.071748] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [170.071900] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3

<7> [170.072052] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [170.072215] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [170.072408] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [170.072592] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [170.072747] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [170.073247] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [170.073415] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [170.073592] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [170.073792] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [170.073945] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [170.074097] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [170.074352] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [170.074652] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [170.074846] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [170.075000] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [170.075153] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [170.075341] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<7> [170.075822] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [170.076247] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [170.076897] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [170.077057] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [170.077209] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [170.077387] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [170.077409] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [170.077673] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [170.077908] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<6> [170.078105] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [170.078136] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [170.078281] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [170.078460] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [170.078621] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [170.078763] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [170.078904] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [170.080188] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [170.081682] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [170.081997] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] Using AUX CH A (VBT)

<7> [170.082228] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A]

<7> [170.085206] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [170.085369] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [170.085544] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [170.085775] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static

<7> [170.085933] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [170.086087] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [170.086237] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [170.086399] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [170.086629] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [170.086781] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0

<7> [170.086933] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1

<7> [170.087123] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0

<7> [170.087330] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [170.087525] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [170.087733] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [170.087867] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [170.088037] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [170.088242] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [170.088594] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on

<7> [170.088760] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [170.088976] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [170.089134] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [170.089329] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [170.089563] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [170.305402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.316402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.327404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.339401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.350401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.361402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.372401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.383401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.394401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.405403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.416401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.427401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.438402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.449400] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.460401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.471403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.482401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.493401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.504401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.515402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.526400] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.537400] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.548401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.559403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.570401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.581401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.592401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.603403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.614401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.625400] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.636401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.647403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.647621] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110

<6> [170.647636] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP

<7> [170.647699] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off

<7> [170.647902] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [170.648142] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] Using AUX CH B (VBT)

<7> [170.648302] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B]

<7> [170.659403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.670402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.681402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.692402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.703403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.714402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.725402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.736404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.747403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.758402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.769402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.780401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.791403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.802402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.813403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.824402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.835403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.846401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.857402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.868402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.879403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.890402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.901402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.912402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.923403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.934402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.945402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.956401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.967403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.978402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.989402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.000403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.000608] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX B/DDI B/PHY B: Too many retries, giving up. First error: -110

<7> [171.000620] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel

<7> [171.011404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.022401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.033402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.044402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.055404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.066402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.077402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.088401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.099403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.110401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.121401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.132401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.143404] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.154401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.165401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.176402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.187403] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.198401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.209401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.220402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.231400] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.242400] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.253400] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.264402] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.275400] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.286400] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.297400] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.308401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.319400] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.330400] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.341401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.352401] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.352627] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX B/DDI B/PHY B: Too many retries, giving up. First error: -110

<7> [171.352639] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [171.352796] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DDI C/PHY C] Using AUX CH C (VBT)

<7> [171.352950] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C]

<7> [171.354046] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel

<7> [171.355035] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [171.355190] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C]

<7> [171.355334] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:106:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [171.355740] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [171.355953] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [171.356163] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [171.356324] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [171.356492] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [171.356687] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [171.356847] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [171.357007] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [171.357201] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [171.357360] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [171.357562] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [171.357722] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [171.357883] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [171.358027] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A

<7> [171.358173] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B

<7> [171.358317] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C

<7> [171.358483] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [171.358629] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A

<7> [171.358774] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B

<7> [171.358919] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C

<7> [171.359079] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [171.359248] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [171.359422] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [171.359586] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [171.359789] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled

<7> [171.359966] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled

<7> [171.360140] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled

<7> [171.360287] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [171.360507] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [171.360654] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [171.360797] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [171.360954] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [171.361102] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [171.361282] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [171.361433] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [171.361625] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [171.361774] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [171.361919] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [171.362063] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [171.362265] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [171.362427] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [171.362581] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [171.362733] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [171.362887] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [171.363034] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [171.363177] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [171.363350] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [171.363475] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [171.363602] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [171.363746] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 6 GT workarounds on global

<7> [171.365665] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [171.365813] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [171.365954] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 14 context workarounds on rcs'0

<7> [171.377158] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [171.377284] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [171.377405] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [171.377516] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [171.377788] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [171.378070] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [171.378216] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [171.378357] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [171.378504] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [171.378660] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [171.382189] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [171.383158] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event

<7> [171.383743] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [171.384698] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event

<7> [171.384990] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event

<6> [171.385029] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0

<7> [171.386321] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected

<6> [171.399535] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [171.401384] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8

<7> [171.402145] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [171.403224] i915 display info: display version: 9

<7> [171.403228] i915 display info: cursor_needs_physical: no

<7> [171.403229] [drm:drm_client_modeset_probe]

<7> [171.403231] i915 display info: has_cdclk_crawl: no

<7> [171.403234] i915 display info: has_cdclk_squash: no

<7> [171.403237] i915 display info: has_ddi: yes

<7> [171.403239] i915 display info: has_dp_mst: yes

<7> [171.403242] i915 display info: has_dsb: no

<7> [171.403244] i915 display info: has_fpga_dbg: yes

<7> [171.403247] i915 display info: has_gmch: no

<7> [171.403249] i915 display info: has_hotplug: yes

<7> [171.403251] i915 display info: has_hti: no

<7> [171.403253] i915 display info: has_ipc: yes

<7> [171.403255] i915 display info: has_overlay: no

<7> [171.403258] i915 display info: has_psr: yes

<7> [171.403260] i915 display info: has_psr_hw_tracking: yes

<7> [171.403263] i915 display info: overlay_needs_physical: no

<7> [171.403266] i915 display info: supports_tv: no

<7> [171.403268] i915 display info: has_hdcp: yes

<7> [171.403270] i915 display info: has_dmc: yes

<7> [171.403272] i915 display info: has_dsc: no

<7> [171.403272] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [171.403281] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [171.403277] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [171.403554] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [171.403782] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [171.404007] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [171.404422] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] status updated from unknown to disconnected

<7> [171.404439] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [171.404447] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [171.404454] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [171.404854] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [171.405085] i915 device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9

<7> [171.405090] i915 device info: graphics version: 9

<7> [171.405093] i915 device info: media version: 9

<7> [171.405095] i915 device info: graphics stepping: F0

<7> [171.405098] i915 device info: media stepping: F0

<7> [171.405100] i915 device info: display stepping: C0

<7> [171.405103] i915 device info: base die stepping: **

<7> [171.405106] i915 device info: gt: 2

<7> [171.405108] i915 device info: memory-regions: 0x21

<7> [171.405111] i915 device info: page-sizes: 0x11000

<7> [171.405114] i915 device info: platform: KABYLAKE

<7> [171.405116] i915 device info: ppgtt-size: 48

<7> [171.405119] i915 device info: ppgtt-type: 2

<7> [171.405121] i915 device info: dma_mask_size: 39

<7> [171.405123] i915 device info: is_mobile: no

<7> [171.405126] i915 device info: is_lp: no

<7> [171.405129] i915 device info: require_force_probe: no

<7> [171.405131] i915 device info: is_dgfx: no

<7> [171.405134] i915 device info: has_64bit_reloc: yes

<7> [171.405137] i915 device info: has_64k_pages: no

<7> [171.405139] i915 device info: gpu_reset_clobbers_display: no

<7> [171.405142] i915 device info: has_reset_engine: yes

<7> [171.405144] i915 device info: has_3d_pipeline: yes

<7> [171.405147] i915 device info: has_flat_ccs: no

<7> [171.405149] i915 device info: has_global_mocs: no

<7> [171.405152] i915 device info: has_gmd_id: no

<7> [171.405154] i915 device info: has_gt_uc: yes

<7> [171.405157] i915 device info: has_heci_pxp: no

<7> [171.405160] i915 device info: has_heci_gscfi: no

<7> [171.405162] i915 device info: has_guc_deprivilege: no

<7> [171.405165] i915 device info: has_guc_tlb_invalidation: no

<7> [171.405167] i915 device info: has_l3_ccs_read: no

<7> [171.405170] i915 device info: has_l3_dpf: no

<7> [171.405173] i915 device info: has_llc: yes

<7> [171.405175] i915 device info: has_logical_ring_contexts: yes

<7> [171.405178] i915 device info: has_logical_ring_elsq: no

<7> [171.405180] i915 device info: has_media_ratio_mode: no

<7> [171.405182] i915 device info: has_mslice_steering: no

<7> [171.405185] i915 device info: has_oa_bpc_reporting: no

<7> [171.405188] i915 device info: has_oa_slice_contrib_limits: no

<7> [171.405190] i915 device info: has_oam: no

<7> [171.405193] i915 device info: has_one_eu_per_fuse_bit: no

<7> [171.405195] i915 device info: has_pxp: no

<7> [171.405198] i915 device info: has_rc6: yes

<7> [171.405200] i915 device info: has_rc6p: no

<7> [171.405202] i915 device info: has_rps: yes

<7> [171.405205] i915 device info: has_runtime_pm: yes

<7> [171.405207] i915 device info: has_snoop: no

<7> [171.405209] i915 device info: has_coherent_ggtt: yes

<7> [171.405212] i915 device info: tuning_thread_rr_after_dep: no

<7> [171.405214] i915 device info: unfenced_needs_alignment: no

<7> [171.405217] i915 device info: hws_needs_physical: no

<7> [171.405220] i915 device info: has_pooled_eu: no

<7> [171.405222] i915 device info: rawclk rate: 24000 kHz

<7> [171.405225] i915 device info: iommu: enabled

<7> [171.405228] i915 device info: available engines: 40403

<7> [171.405230] i915 device info: slice total: 1, mask=0001

<7> [171.405234] i915 device info: subslice total: 3

<7> [171.405236] i915 device info: slice0: 3 subslices, mask=00000007

<7> [171.405239] i915 device info: slice1: 0 subslices, mask=00000000

<7> [171.405242] i915 device info: slice2: 0 subslices, mask=00000000

<7> [171.405245] i915 device info: EU total: 24

<7> [171.405248] i915 device info: EU per subslice: 8

<7> [171.405250] i915 device info: has slice power gating: no

<7> [171.405253] i915 device info: has subslice power gating: no

<7> [171.405255] i915 device info: has EU power gating: yes

<6> [171.405258] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [171.405261] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [171.405264] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [171.405938] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [171.406848] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [171.407619] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] status updated from unknown to disconnected

<7> [171.407636] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [171.407644] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [171.407652] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [171.408599] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [171.408824] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [171.409318] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [171.409610] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [171.409631] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [171.409832] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [171.414622] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [171.414630] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [171.414866] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected

<7> [171.414881] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [171.414887] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [171.414892] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [171.414897] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [171.414902] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [171.414940] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [171.414951] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [171.414972] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [171.414982] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [171.415714] [drm:drm_client_modeset_probe]

<7> [171.415740] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [171.415746] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [171.416019] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [171.416024] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [171.416028] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [171.418236] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [171.419195] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [171.419582] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [171.420354] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [171.420364] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [171.420372] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [171.421167] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [171.421350] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [171.421802] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [171.421961] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [171.421966] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [171.422081] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [171.426308] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [171.426315] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [171.426506] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [171.426511] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [171.426515] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [171.426518] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [171.426535] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [171.426560] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [171.426567] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [171.426727] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [171.426734] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [171.426745] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [171.426798] [drm:drm_client_modeset_probe]

<7> [171.426736] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [171.427068] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [171.427075] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [171.427081] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [171.427247] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [171.427252] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [171.427256] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [171.428586] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [171.429760] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [171.430608] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [171.430614] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [171.430618] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [171.431074] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [171.431203] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [171.431624] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [171.431778] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [171.431782] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [171.431893] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [171.436292] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [171.436298] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [171.436504] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [171.436532] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [171.436537] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [171.436541] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [171.436545] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [171.436575] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [171.436582] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [171.436595] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [171.436602] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [171.436692] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [171.436700] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [171.438268] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [171.439181] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [171.440072] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [171.440164] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [171.440170] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [171.440915] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [171.441088] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [171.441565] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [171.441818] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [171.441823] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [171.441988] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [171.446646] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [171.446651] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [171.446775] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [171.449649] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [171.449654] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [171.449814] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [171.450221] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [171.450225] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [171.451484] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [171.452481] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [171.453258] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [171.453869] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [171.453874] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [171.454285] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [171.454412] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [171.454968] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [171.455189] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [171.455195] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [171.455358] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [171.459676] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [171.459683] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [171.459865] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [171.460331] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [171.460337] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [171.460580] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [171.460633] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [171.460651] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [171.461952] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [171.462820] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [171.463472] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [171.463499] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [171.463505] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [171.464000] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [171.464166] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [171.464599] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [171.464807] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [171.464813] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [171.464977] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [171.469250] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [171.469256] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [171.469451] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [171.662533] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [171.662900] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [171.663058] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [171.663197] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [171.663807] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [182.003817] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [182.013434] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [182.528255] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [182.534215] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [182.534805] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [182.535667] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]

<7> [182.535623] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [182.536429] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [182.537127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [182.537773] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [182.538378] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [182.540452] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [182.541634] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [182.542572] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [182.543210] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [182.543338] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [182.543742] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [182.543908] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [182.543913] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [182.544025] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [182.548119] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [182.548124] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [182.548540] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]

<7> [182.548710] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]

<7> [182.646558] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [182.664536] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [182.664801] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [182.665028] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [182.665734] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [182.666517] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [182.670405] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [182.865526] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [182.874174] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [182.874783] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [182.875189] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [182.875974] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [182.876785] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [182.877465] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [182.878072] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [182.878334] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [182.878598] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [182.878835] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [182.879117] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [182.880493] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [182.881323] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [182.882019] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [182.882578] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [182.882802] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [182.883283] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [182.883551] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [182.883560] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [182.883815] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [182.888065] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [182.888070] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [182.904671] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [182.945320] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<6> [183.171184] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS

<6> [183.171225] [IGT] i915_pm_rpm: exiting, ret=0

Results for igt@i915_pm_rpm@module-reload