igt@i915_selftest@live@mman on bat-jsl-3@linus-v6.8-rc5 Test details

Detail	Value
Duration	8.58 seconds
Igt-Version	IGT-Version: 1.28-g21e9f1e49 (x86_64) (Linux: 6.8.0-rc5-linus-v6.8-rc5-gb401b621758e+ x86_64)
Out	Starting dynamic subtest: mman Dynamic subtest mman: SUCCESS (8.579s)
Err	Starting dynamic subtest: mman Dynamic subtest mman: SUCCESS (8.579s)
Dmesg	<6> [440.952471] [IGT] i915_selftest: starting dynamic subtest mman <5> [441.114733] Setting dangerous option live_selftests - tainting kernel <7> [441.191019] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7> [441.191521] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [441.191968] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Jasper Lake PCH <7> [441.192421] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [441.193013] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [441.193398] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 19200 kHz <7> [441.194464] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vdbox enable: 0001, instances: 0001 <7> [441.194829] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vebox enable: 0001, instances: 0001 <7> [441.195711] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [441.196043] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [441.196348] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 60M <6> [441.196692] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [441.196703] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [441.197452] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [441.197492] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x000000007fa000c7 <7> [441.197905] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 61440K, usable: 59392K <7> [441.198755] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x76f03018 <7> [441.199213] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.1.0 <7> [441.199591] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [441.199989] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [441.200360] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [441.208762] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300583 <7> [441.209182] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [441.209533] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [441.209910] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [441.210303] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [441.210664] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 128 Gb, width: X8, ranks: 2, 16Gb DIMMs: no <7> [441.210989] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [441.211291] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb DIMMs: no <7> [441.211594] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 128 Gb, width: X8, ranks: 2, 16Gb DIMMs: no <7> [441.211907] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [441.212203] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb DIMMs: no <7> [441.212489] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [441.212920] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [441.213247] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [441.213566] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=2134 tRP=15 tRDPRE=8 tRAS=35 tRCD=15 tRC=50 <7> [441.213977] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=2934 tRP=21 tRDPRE=12 tRAS=47 tRCD=21 tRC=68 <7> [441.214371] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=2401 tRP=17 tRDPRE=9 tRAS=39 tRCD=17 tRC=56 <7> [441.214761] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW0 / QGV 0: num_planes=4 deratedbw=9834 <7> [441.215144] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW0 / QGV 1: num_planes=4 deratedbw=9941 <7> [441.215536] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW0 / QGV 2: num_planes=4 deratedbw=9878 <7> [441.215935] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW1 / QGV 0: num_planes=2 deratedbw=14899 <7> [441.216315] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW1 / QGV 1: num_planes=2 deratedbw=16488 <7> [441.216696] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW1 / QGV 2: num_planes=2 deratedbw=15583 <7> [441.217068] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW2 / QGV 0: num_planes=1 deratedbw=20069 <7> [441.217459] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW2 / QGV 1: num_planes=1 deratedbw=23719 <7> [441.217876] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW2 / QGV 2: num_planes=1 deratedbw=21483 <7> [441.218255] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW3 / QGV 0: num_planes=1 deratedbw=24280 <7> [441.218624] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW3 / QGV 1: num_planes=1 deratedbw=25000 <7> [441.219000] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW3 / QGV 2: num_planes=1 deratedbw=25000 <7> [441.219386] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW4 / QGV 0: num_planes=1 deratedbw=25000 <7> [441.219796] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW4 / QGV 1: num_planes=1 deratedbw=25000 <7> [441.220263] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW4 / QGV 2: num_planes=1 deratedbw=25000 <7> [441.220635] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW5 / QGV 0: num_planes=1 deratedbw=25000 <7> [441.221020] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW5 / QGV 1: num_planes=1 deratedbw=25000 <7> [441.221388] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW5 / QGV 2: num_planes=1 deratedbw=25000 <7> [441.222405] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [441.222858] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT JASPERLAKE ", BDB version 228 <7> [441.223253] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [441.223635] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 356, min size 5) <7> [441.224034] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [441.224440] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [441.224856] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 780, min size 812) <7> [441.225238] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 30, min size 34) <7> [441.225613] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [441.225999] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1298, min size 1366) <7> [441.226379] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [441.226796] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 54, min size 78) <7> [441.227188] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7> [441.227556] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 <7> [441.227935] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [441.228297] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [441.228684] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [441.229082] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [441.229470] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [441.229856] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [441.230233] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [441.230587] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT DP max link rate: 810000 <7> [441.230966] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [441.231355] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 0 <7> [441.231752] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT DP max link rate: 810000 <7> [441.232123] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [441.232488] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 0 <7> [441.232863] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT DP max link rate: 810000 <7> [441.233235] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 0a <7> [441.233680] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [441.234270] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [441.234719] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 0 <7> [441.235099] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [441.235596] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [441.236002] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [441.236391] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [441.236877] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [441.237249] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [441.237764] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4 <7> [441.238303] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/icl_dmc_ver1_09.bin <7> [441.240216] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [441.240685] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x5fc0 <7> [441.241063] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xa40088 (EVT_HTP) <7> [441.241324] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [441.241429] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [441.242274] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us <6> [441.242604] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/icl_dmc_ver1_09.bin (v1.9) <7> [441.242684] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [441.243070] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [441.243449] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [441.243839] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [441.244208] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [441.244565] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [441.244937] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [441.245294] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [441.260857] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [441.267256] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 0 <7> [441.267826] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 556800 kHz <7> [441.268221] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] Max dotclock rate: 1113600 kHz <7> [441.268758] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:238:DDI A/PHY A] Using AUX CH A (VBT) <7> [441.269222] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:238:DDI A/PHY A] <7> [441.274727] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [441.275119] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [441.275494] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [441.275881] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [441.276293] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [441.276700] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [441.277079] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [441.277447] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [441.277822] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [441.278193] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7> [441.278767] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:238:DDI A/PHY A] initial power sequencer: PPS 0 <7> [441.279229] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [441.279583] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [441.279946] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [441.280304] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [441.280689] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [441.281168] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [441.281725] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7> [441.282298] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 turning VDD on <7> [441.282704] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [441.283178] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [441.283552] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [441.283993] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [441.284357] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 panel power wasn't enabled <6> [441.338727] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:02:00.0 <4> [441.338768] nvme 0000:02:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [441.338780] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [441.338792] nvme 0000:02:00.0: [ 0] RxErr <7> [441.491337] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 c4 41 00 00 01 c0 02 00 00 00 1f 0b 00 <7> [441.492975] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 00-22-b9 dev-ID sivarT HW-rev 0.0 SW-rev 0.0 quirks 0x0001 <7> [441.494146] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 b7 f6 <7> [441.496096] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel <7> [441.498152] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1 <7> [441.507927] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [441.510214] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [441.512413] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [441.514569] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [441.516601] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [441.518936] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [441.521740] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [441.523832] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [441.525703] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:239:eDP-1] Assigning DFP sink color depth as 8 bpc. <7> [441.525737] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:239:eDP-1] ELD monitor <7> [441.525756] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:239:eDP-1] ELD size 20, SAD count 0 <7> [441.525978] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:239:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa <7> [441.526963] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:239:eDP-1] using alternate EDID fixed mode: "3200x1800": 52 361310 3200 3248 3280 3424 1800 1802 1807 2045 0x40 0xa <7> [441.527879] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:239:eDP-1] Performing OUI wait (30 ms) <7> [441.535911] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:239:eDP-1] DRRS type: none <7> [441.537102] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:239:eDP-1] Using native PCH PWM for backlight control (controller=0) <7> [441.538080] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:239:eDP-1] backlight initialized, disabled, brightness 0/96000 <7> [441.539537] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [441.540445] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [441.541408] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [441.542274] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [441.543172] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [441.544168] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [441.546401] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:247:DDI B/PHY B] Using AUX CH B (VBT) <7> [441.547413] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:247:DDI B/PHY B] <7> [441.549354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B <7> [441.575688] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [441.601660] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [441.626661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [441.651662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [441.676662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [441.701662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [441.726661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [441.751666] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [441.776662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [441.802661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [441.827662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [441.853661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [441.878659] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [441.903660] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [441.928677] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [441.953662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [441.978661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [442.003662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [442.028661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [442.053660] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <6> [442.064609] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:02:00.0 <4> [442.064627] nvme 0000:02:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [442.064633] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [442.064638] nvme 0000:02:00.0: [ 0] RxErr <7> [442.078662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [442.103661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [442.128660] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [442.153662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [442.178662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [442.203662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [442.228661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [442.253661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [442.278663] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [442.303661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [442.328660] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [442.353662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [442.354134] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX B/DDI B/PHY B: Too many retries, giving up. First error: -110 <7> [442.354166] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel <7> [442.379667] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [442.404663] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [442.429662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [442.454662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [442.479661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [442.504661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [442.529662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [442.554662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [442.579661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [442.604662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [442.629662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [442.654662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [442.679661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [442.704662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [442.729662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [442.754661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [442.779662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [442.804666] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [442.829662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [442.854662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [442.879661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [442.904661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [442.929662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [442.954661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [442.979661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [443.004666] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [443.029662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [443.054662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [443.079661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [443.104661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [443.129661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [443.154662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [443.155111] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX B/DDI B/PHY B: Too many retries, giving up. First error: -110 <7> [443.155143] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [443.155526] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:247:DDI B/PHY B] <7> [443.155908] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:247:DDI B/PHY B] Using DDC pin 0x2 (VBT) <7> [443.156599] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:262:DDI C (TC)/PHY C] <7> [443.156999] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:262:DDI C (TC)/PHY C] Using DDC pin 0x3 (VBT) <7> [443.158053] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:98:pipe A] hw state readout: disabled <7> [443.158838] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:167:pipe B] hw state readout: disabled <7> [443.159580] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:236:pipe C] hw state readout: disabled <7> [443.160004] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [443.160405] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] hw state readout: disabled, pipe A <7> [443.160838] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] hw state readout: disabled, pipe A <7> [443.161254] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] hw state readout: disabled, pipe A <7> [443.161669] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] hw state readout: disabled, pipe A <7> [443.162073] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:plane 6A] hw state readout: disabled, pipe A <7> [443.162467] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:85:plane 7A] hw state readout: disabled, pipe A <7> [443.162879] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:cursor A] hw state readout: disabled, pipe A <7> [443.163294] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 1B] hw state readout: disabled, pipe B <7> [443.163732] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 2B] hw state readout: disabled, pipe B <7> [443.164133] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 3B] hw state readout: disabled, pipe B <7> [443.164526] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:plane 4B] hw state readout: disabled, pipe B <7> [443.164931] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:136:plane 5B] hw state readout: disabled, pipe B <7> [443.165335] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:145:plane 6B] hw state readout: disabled, pipe B <7> [443.165768] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:154:plane 7B] hw state readout: disabled, pipe B <7> [443.166174] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:163:cursor B] hw state readout: disabled, pipe B <7> [443.166566] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 1C] hw state readout: disabled, pipe C <7> [443.166970] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:plane 2C] hw state readout: disabled, pipe C <7> [443.167366] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:187:plane 3C] hw state readout: disabled, pipe C <7> [443.167799] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:196:plane 4C] hw state readout: disabled, pipe C <7> [443.168210] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:205:plane 5C] hw state readout: disabled, pipe C <7> [443.168602] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:214:plane 6C] hw state readout: disabled, pipe C <7> [443.169008] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:223:plane 7C] hw state readout: disabled, pipe C <7> [443.169403] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:232:cursor C] hw state readout: disabled, pipe C <7> [443.169838] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:238:DDI A/PHY A] hw state readout: disabled, pipe A <7> [443.170248] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:247:DDI B/PHY B] hw state readout: disabled, pipe A <7> [443.170612] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:249:DP-MST A] hw state readout: disabled, pipe A <7> [443.171005] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:250:DP-MST B] hw state readout: disabled, pipe B <7> [443.171365] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:251:DP-MST C] hw state readout: disabled, pipe C <7> [443.171844] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:262:DDI C (TC)/PHY C] hw state readout: disabled, pipe A <7> [443.172245] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 0 <7> [443.172701] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [443.173122] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 4 hw state readout: pipe_mask 0x0, on 0 <7> [443.173632] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:239:eDP-1] hw state readout: disabled <7> [443.174082] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:248:DP-1] hw state readout: disabled <7> [443.174506] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:257:HDMI-A-1] hw state readout: disabled <7> [443.174966] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:263:HDMI-A-2] hw state readout: disabled <7> [443.175342] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [443.175727] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] min_cdclk 0 kHz <7> [443.176089] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] min_cdclk 0 kHz <7> [443.176440] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] min_cdclk 0 kHz <7> [443.176806] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] min_cdclk 0 kHz <7> [443.177173] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:plane 6A] min_cdclk 0 kHz <7> [443.177553] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:85:plane 7A] min_cdclk 0 kHz <7> [443.177943] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:cursor A] min_cdclk 0 kHz <7> [443.178313] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [443.178707] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 1B] min_cdclk 0 kHz <7> [443.179066] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 2B] min_cdclk 0 kHz <7> [443.179434] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 3B] min_cdclk 0 kHz <7> [443.179847] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:plane 4B] min_cdclk 0 kHz <7> [443.180217] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:136:plane 5B] min_cdclk 0 kHz <7> [443.180575] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:145:plane 6B] min_cdclk 0 kHz <7> [443.180949] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:154:plane 7B] min_cdclk 0 kHz <7> [443.181306] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:163:cursor B] min_cdclk 0 kHz <7> [443.181673] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [443.182064] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 1C] min_cdclk 0 kHz <7> [443.182448] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:plane 2C] min_cdclk 0 kHz <7> [443.182840] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:187:plane 3C] min_cdclk 0 kHz <7> [443.183207] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:196:plane 4C] min_cdclk 0 kHz <7> [443.183562] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:205:plane 5C] min_cdclk 0 kHz <7> [443.183927] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:214:plane 6C] min_cdclk 0 kHz <7> [443.184287] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:223:plane 7C] min_cdclk 0 kHz <7> [443.184694] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:232:cursor C] min_cdclk 0 kHz <7> [443.185074] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [443.208803] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:98:pipe A] enable: no [setup_hw_state] <7> [443.209252] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:167:pipe B] enable: no [setup_hw_state] <7> [443.209624] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:236:pipe C] enable: no [setup_hw_state] <7> [443.210024] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:98:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [443.210435] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:167:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [443.210861] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:236:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [443.211526] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [443.211873] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [443.212185] i915 0000:00:02.0: [drm:i915_gem_init [i915]] No clock gating settings or workarounds applied. <7> [443.212565] MCR Steering: Default steering: group=0x0, instance=0x0 <7> [443.212591] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 9 GT workarounds on global <7> [443.217148] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 engine workarounds on rcs'0 <7> [443.217574] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 4 whitelist workarounds on rcs'0 <7> [443.217974] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 context workarounds on rcs'0 <7> [443.221169] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 whitelist workarounds on bcs'0 <7> [443.222244] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 4 whitelist workarounds on vcs'0 <7> [443.223271] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 whitelist workarounds on vecs'0 <7> [443.240626] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [443.241058] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [443.241371] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [443.241706] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [443.242905] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:98:pipe A] not active, skipping <7> [443.243321] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:167:pipe B] not active, skipping <7> [443.243721] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:236:pipe C] not active, skipping <7> [443.244087] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [443.244497] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [443.254609] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:239:eDP-1] backlight device intel_backlight registered <7> [443.255282] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [443.257224] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B <7> [443.259358] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:239:eDP-1] generating connector hotplug event <7> [443.260413] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [443.262084] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:248:DP-1] generating connector hotplug event <7> [443.262859] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:257:HDMI-A-1] generating connector hotplug event <7> [443.263551] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:263:HDMI-A-2] generating connector hotplug event <6> [443.263804] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0 <7> [443.267371] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 4 outputs detected <6> [443.299845] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [443.307208] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input38 <6> [443.308162] sdhci-pci 0000:00:14.5: SDHCI controller found [8086:4df8] (rev 0) <7> [443.308508] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x810 (init value 0x810) <7> [443.310154] [drm:drm_client_modeset_probe] <7> [443.310224] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:239:eDP-1] <7> [443.310240] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:239:eDP-1] <7> [443.310635] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:239:eDP-1] status updated from unknown to disconnected <7> [443.310672] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:239:eDP-1] disconnected <7> [443.310683] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:239:eDP-1] EDID changed, epoch counter 2 <7> [443.310714] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:248:DP-1] <7> [443.310725] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:248:DP-1] <7> [443.311118] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:248:DP-1] status updated from unknown to disconnected <7> [443.311128] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:248:DP-1] disconnected <7> [443.311137] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] <7> [443.311153] i915 display info: display version: 11 <7> [443.311163] i915 display info: cursor_needs_physical: no <7> [443.311168] i915 display info: has_cdclk_crawl: no <7> [443.311172] i915 display info: has_cdclk_squash: no <7> [443.311176] i915 display info: has_ddi: yes <7> [443.311180] i915 display info: has_dp_mst: yes <7> [443.311184] i915 display info: has_dsb: no <7> [443.311187] i915 display info: has_fpga_dbg: yes <7> [443.311191] i915 display info: has_gmch: no <7> [443.311194] i915 display info: has_hotplug: yes <7> [443.311198] i915 display info: has_hti: no <7> [443.311201] i915 display info: has_ipc: yes <7> [443.311205] i915 display info: has_overlay: no <7> [443.311208] i915 display info: has_psr: yes <7> [443.311212] i915 display info: has_psr_hw_tracking: yes <7> [443.311215] i915 display info: overlay_needs_physical: no <7> [443.311219] i915 display info: supports_tv: no <7> [443.311222] i915 display info: has_hdcp: no <7> [443.311226] i915 display info: has_dmc: yes <7> [443.311230] i915 display info: has_dsc: yes <7> [443.311148] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7> [443.311239] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4 <7> [443.311530] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] status updated from unknown to disconnected <7> [443.312013] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] disconnected <7> [443.312028] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2] <7> [443.312038] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:263:HDMI-A-2] <7> [443.312430] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2] status updated from unknown to disconnected <7> [443.312450] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2] disconnected <7> [443.312459] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [443.312467] [drm:drm_client_modeset_probe] connector 239 enabled? no <7> [443.312474] [drm:drm_client_modeset_probe] connector 248 enabled? no <7> [443.312480] [drm:drm_client_modeset_probe] connector 257 enabled? no <7> [443.312485] [drm:drm_client_modeset_probe] connector 263 enabled? no <7> [443.312553] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [443.312573] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [443.312603] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [443.312620] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [443.313352] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [443.313794] i915 device info: pciid=0x4e51 rev=0x01 platform=JASPERLAKE (subplatform=0x0) gen=11 <7> [443.313803] i915 device info: graphics version: 11 <7> [443.313807] i915 device info: media version: 11 <7> [443.313811] i915 device info: graphics stepping: B0 <7> [443.313814] i915 device info: media stepping: B0 <7> [443.313818] i915 device info: display stepping: B0 <7> [443.313821] i915 device info: base die stepping: ** <7> [443.313824] i915 device info: gt: 0 <7> [443.313827] i915 device info: memory-regions: 0x21 <7> [443.313831] i915 device info: page-sizes: 0x211000 <7> [443.313834] i915 device info: platform: JASPERLAKE <7> [443.313838] i915 device info: ppgtt-size: 36 <7> [443.313841] i915 device info: ppgtt-type: 2 <7> [443.313845] i915 device info: dma_mask_size: 39 <7> [443.313848] i915 device info: is_mobile: no <7> [443.313852] i915 device info: is_lp: no <7> [443.313855] i915 device info: require_force_probe: no <7> [443.313858] i915 device info: is_dgfx: no <7> [443.313862] i915 device info: has_64bit_reloc: yes <7> [443.313865] i915 device info: has_64k_pages: no <7> [443.313868] i915 device info: gpu_reset_clobbers_display: no <7> [443.313872] i915 device info: has_reset_engine: yes <7> [443.313875] i915 device info: has_3d_pipeline: yes <7> [443.313879] i915 device info: has_flat_ccs: no <7> [443.313882] i915 device info: has_global_mocs: no <7> [443.313885] i915 device info: has_gmd_id: no <7> [443.313889] i915 device info: has_gt_uc: yes <7> [443.313892] i915 device info: has_heci_pxp: no <7> [443.313895] i915 device info: has_heci_gscfi: no <7> [443.313899] i915 device info: has_guc_deprivilege: no <7> [443.313902] i915 device info: has_guc_tlb_invalidation: no <7> [443.313906] i915 device info: has_l3_ccs_read: no <7> [443.313909] i915 device info: has_l3_dpf: no <7> [443.313912] i915 device info: has_llc: yes <7> [443.313916] i915 device info: has_logical_ring_contexts: yes <7> [443.313919] i915 device info: has_logical_ring_elsq: yes <7> [443.313923] i915 device info: has_media_ratio_mode: no <7> [443.313926] i915 device info: has_mslice_steering: no <7> [443.313930] i915 device info: has_oa_bpc_reporting: no <7> [443.313933] i915 device info: has_oa_slice_contrib_limits: no <7> [443.313937] i915 device info: has_oam: no <7> [443.313940] i915 device info: has_one_eu_per_fuse_bit: no <7> [443.313943] i915 device info: has_pxp: no <7> [443.313947] i915 device info: has_rc6: yes <7> [443.313950] i915 device info: has_rc6p: no <7> [443.313953] i915 device info: has_rps: yes <7> [443.313957] i915 device info: has_runtime_pm: yes <7> [443.313960] i915 device info: has_snoop: no <7> [443.313963] i915 device info: has_coherent_ggtt: no <7> [443.313967] i915 device info: tuning_thread_rr_after_dep: no <7> [443.313970] i915 device info: unfenced_needs_alignment: no <7> [443.313973] i915 device info: hws_needs_physical: no <7> [443.313976] i915 device info: has_pooled_eu: no <7> [443.313980] i915 device info: rawclk rate: 19200 kHz <7> [443.313984] i915 device info: iommu: enabled <7> [443.313988] i915 device info: available engines: 40403 <7> [443.313992] i915 device info: slice total: 1, mask=0001 <7> [443.313996] i915 device info: subslice total: 4 <7> [443.313999] i915 device info: slice0: 4 subslices, mask=0000000f <7> [443.314004] i915 device info: EU total: 16 <7> [443.314007] i915 device info: EU per subslice: 4 <7> [443.314011] i915 device info: has slice power gating: yes <7> [443.314014] i915 device info: has subslice power gating: yes <7> [443.314017] i915 device info: has EU power gating: yes <6> [443.314022] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [443.314026] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [443.314030] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [443.314039] i915: Performing live selftests with st_random_seed=0x773aa4b6 st_timeout=500 <6> [443.314044] i915: Running mman <6> [443.314082] i915: Running i915_gem_mman_live_selftests/igt_partial_tiling <7> [443.338320] [drm:drm_client_modeset_probe] <7> [443.338391] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:239:eDP-1] <7> [443.338408] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:239:eDP-1] <7> [443.340093] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:239:eDP-1] disconnected <7> [443.340113] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:248:DP-1] <7> [443.340126] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:248:DP-1] <7> [443.340538] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:248:DP-1] disconnected <7> [443.340548] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] <7> [443.340559] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7> [443.343671] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] disconnected <7> [443.343687] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2] <7> [443.343699] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:263:HDMI-A-2] <7> [443.344103] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2] disconnected <7> [443.344112] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [443.344121] [drm:drm_client_modeset_probe] connector 239 enabled? no <7> [443.344128] [drm:drm_client_modeset_probe] connector 248 enabled? no <7> [443.344134] [drm:drm_client_modeset_probe] connector 257 enabled? no <7> [443.344139] [drm:drm_client_modeset_probe] connector 263 enabled? no <7> [443.344207] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [443.344227] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [443.344255] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [443.344273] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [443.360795] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [443.361587] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [443.935927] check_partial_mappings: timed out after tiling=0 stride=0 <7> [444.436692] check_partial_mappings: timed out after tiling=1 stride=262144 <7> [444.553638] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 turning VDD off <7> [444.554178] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [444.554590] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7> [444.555217] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [444.555699] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [444.556115] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [444.557364] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010 <7> [444.557542] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [444.557759] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:238:DDI A/PHY A] - long <7> [444.558152] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [444.558719] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:238:DDI A/PHY A] <7> [444.937760] check_partial_mappings: timed out after tiling=2 stride=262144 <6> [444.967934] i915: Running i915_gem_mman_live_selftests/igt_smoke_tiling <6> [445.520104] igt_smoke_tiling: Completed 1 trials <6> [445.658691] i915: Running i915_gem_mman_live_selftests/igt_mmap_offset_exhaustion <7> [445.658814] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <6> [445.699938] i915: Running i915_gem_mman_live_selftests/igt_mmap <7> [445.701012] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [445.712668] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [445.718027] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [445.721847] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [445.727684] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [445.792726] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [447.699578] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <6> [449.055901] i915: Running i915_gem_mman_live_selftests/igt_mmap_migrate <6> [449.055938] i915: Running i915_gem_mman_live_selftests/igt_mmap_access <7> [449.056083] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [449.059102] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [449.060821] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [449.062418] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <6> [449.075127] i915: Running i915_gem_mman_live_selftests/igt_mmap_revoke <7> [449.075277] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [449.078134] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <6> [449.088962] i915: Running i915_gem_mman_live_selftests/igt_mmap_gpu <7> [449.089221] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [449.092138] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [449.095636] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [449.111800] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [449.112616] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [449.113573] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [449.113999] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [449.114399] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4 <7> [449.138239] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [449.190120] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <7> [449.190616] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [449.191598] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [449.192215] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <4> [449.240392] i915: probe of 0000:00:02.0 failed with error -25 <6> [449.533454] [IGT] i915_selftest: finished subtest mman, SUCCESS

<6> [440.952471] [IGT] i915_selftest: starting dynamic subtest mman

<5> [441.114733] Setting dangerous option live_selftests - tainting kernel

<7> [441.191019] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K

<7> [441.191521] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [441.191968] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Jasper Lake PCH

<7> [441.192421] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [441.193013] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [441.193398] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 19200 kHz

<7> [441.194464] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vdbox enable: 0001, instances: 0001

<7> [441.194829] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vebox enable: 0001, instances: 0001

<7> [441.195711] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [441.196043] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [441.196348] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 60M

<6> [441.196692] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [441.196703] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [441.197452] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [441.197492] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x000000007fa000c7

<7> [441.197905] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 61440K, usable: 59392K

<7> [441.198755] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x76f03018

<7> [441.199213] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.1.0

<7> [441.199591] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [441.199989] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [441.200360] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [441.208762] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300583

<7> [441.209182] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [441.209533] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [441.209910] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [441.210303] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [441.210664] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 128 Gb, width: X8, ranks: 2, 16Gb DIMMs: no

<7> [441.210989] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [441.211291] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb DIMMs: no

<7> [441.211594] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 128 Gb, width: X8, ranks: 2, 16Gb DIMMs: no

<7> [441.211907] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [441.212203] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb DIMMs: no

<7> [441.212489] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [441.212920] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [441.213247] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [441.213566] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=2134 tRP=15 tRDPRE=8 tRAS=35 tRCD=15 tRC=50

<7> [441.213977] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=2934 tRP=21 tRDPRE=12 tRAS=47 tRCD=21 tRC=68

<7> [441.214371] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=2401 tRP=17 tRDPRE=9 tRAS=39 tRCD=17 tRC=56

<7> [441.214761] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW0 / QGV 0: num_planes=4 deratedbw=9834

<7> [441.215144] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW0 / QGV 1: num_planes=4 deratedbw=9941

<7> [441.215536] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW0 / QGV 2: num_planes=4 deratedbw=9878

<7> [441.215935] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW1 / QGV 0: num_planes=2 deratedbw=14899

<7> [441.216315] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW1 / QGV 1: num_planes=2 deratedbw=16488

<7> [441.216696] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW1 / QGV 2: num_planes=2 deratedbw=15583

<7> [441.217068] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW2 / QGV 0: num_planes=1 deratedbw=20069

<7> [441.217459] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW2 / QGV 1: num_planes=1 deratedbw=23719

<7> [441.217876] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW2 / QGV 2: num_planes=1 deratedbw=21483

<7> [441.218255] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW3 / QGV 0: num_planes=1 deratedbw=24280

<7> [441.218624] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW3 / QGV 1: num_planes=1 deratedbw=25000

<7> [441.219000] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW3 / QGV 2: num_planes=1 deratedbw=25000

<7> [441.219386] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW4 / QGV 0: num_planes=1 deratedbw=25000

<7> [441.219796] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW4 / QGV 1: num_planes=1 deratedbw=25000

<7> [441.220263] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW4 / QGV 2: num_planes=1 deratedbw=25000

<7> [441.220635] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW5 / QGV 0: num_planes=1 deratedbw=25000

<7> [441.221020] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW5 / QGV 1: num_planes=1 deratedbw=25000

<7> [441.221388] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0 [i915]] BW5 / QGV 2: num_planes=1 deratedbw=25000

<7> [441.222405] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [441.222858] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT JASPERLAKE ", BDB version 228

<7> [441.223253] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [441.223635] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 356, min size 5)

<7> [441.224034] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [441.224440] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [441.224856] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 780, min size 812)

<7> [441.225238] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 30, min size 34)

<7> [441.225613] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [441.225999] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1298, min size 1366)

<7> [441.226379] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [441.226796] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 54, min size 78)

<7> [441.227188] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822)

<7> [441.227556] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0

<7> [441.227935] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [441.228297] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [441.228684] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [441.229082] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [441.229470] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [441.229856] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [441.230233] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [441.230587] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT DP max link rate: 810000

<7> [441.230966] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [441.231355] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 0

<7> [441.231752] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT DP max link rate: 810000

<7> [441.232123] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [441.232488] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 0

<7> [441.232863] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT DP max link rate: 810000

<7> [441.233235] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 0a

<7> [441.233680] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [441.234270] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [441.234719] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 0

<7> [441.235099] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [441.235596] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [441.236002] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [441.236391] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [441.236877] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [441.237249] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [441.237764] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4

<7> [441.238303] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/icl_dmc_ver1_09.bin

<7> [441.240216] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [441.240685] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x5fc0

<7> [441.241063] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xa40088 (EVT_HTP)

<7> [441.241324] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [441.241429] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [441.242274] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us

<6> [441.242604] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/icl_dmc_ver1_09.bin (v1.9)

<7> [441.242684] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [441.243070] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [441.243449] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [441.243839] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [441.244208] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [441.244565] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [441.244937] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [441.245294] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [441.260857] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [441.267256] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 0

<7> [441.267826] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 556800 kHz

<7> [441.268221] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] Max dotclock rate: 1113600 kHz

<7> [441.268758] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:238:DDI A/PHY A] Using AUX CH A (VBT)

<7> [441.269222] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:238:DDI A/PHY A]

<7> [441.274727] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [441.275119] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [441.275494] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [441.275881] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [441.276293] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [441.276700] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [441.277079] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [441.277447] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [441.277822] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [441.278193] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0

<7> [441.278767] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:238:DDI A/PHY A] initial power sequencer: PPS 0

<7> [441.279229] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [441.279583] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [441.279946] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [441.280304] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [441.280689] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [441.281168] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [441.281725] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A

<7> [441.282298] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 turning VDD on

<7> [441.282704] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [441.283178] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [441.283552] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [441.283993] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [441.284357] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 panel power wasn't enabled

<6> [441.338727] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:02:00.0

<4> [441.338768] nvme 0000:02:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [441.338780] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<4> [441.338792] nvme 0000:02:00.0: [ 0] RxErr

<7> [441.491337] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 c4 41 00 00 01 c0 02 00 00 00 1f 0b 00

<7> [441.492975] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 00-22-b9 dev-ID sivarT HW-rev 0.0 SW-rev 0.0 quirks 0x0001

<7> [441.494146] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 b7 f6

<7> [441.496096] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel

<7> [441.498152] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1

<7> [441.507927] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [441.510214] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [441.512413] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [441.514569] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [441.516601] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [441.518936] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [441.521740] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [441.523832] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [441.525703] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:239:eDP-1] Assigning DFP sink color depth as 8 bpc.

<7> [441.525737] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:239:eDP-1] ELD monitor

<7> [441.525756] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:239:eDP-1] ELD size 20, SAD count 0

<7> [441.525978] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:239:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa

<7> [441.526963] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:239:eDP-1] using alternate EDID fixed mode: "3200x1800": 52 361310 3200 3248 3280 3424 1800 1802 1807 2045 0x40 0xa

<7> [441.527879] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:239:eDP-1] Performing OUI wait (30 ms)

<7> [441.535911] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:239:eDP-1] DRRS type: none

<7> [441.537102] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:239:eDP-1] Using native PCH PWM for backlight control (controller=0)

<7> [441.538080] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:239:eDP-1] backlight initialized, disabled, brightness 0/96000

<7> [441.539537] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [441.540445] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [441.541408] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [441.542274] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [441.543172] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [441.544168] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [441.546401] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:247:DDI B/PHY B] Using AUX CH B (VBT)

<7> [441.547413] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:247:DDI B/PHY B]

<7> [441.549354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_B

<7> [441.575688] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [441.601660] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [441.626661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [441.651662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [441.676662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [441.701662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [441.726661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [441.751666] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [441.776662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [441.802661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [441.827662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [441.853661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [441.878659] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [441.903660] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [441.928677] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [441.953662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [441.978661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [442.003662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [442.028661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [442.053660] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<6> [442.064609] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:02:00.0

<4> [442.064627] nvme 0000:02:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [442.064633] nvme 0000:02:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<4> [442.064638] nvme 0000:02:00.0: [ 0] RxErr

<7> [442.078662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [442.103661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [442.128660] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [442.153662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [442.178662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [442.203662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [442.228661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [442.253661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [442.278663] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [442.303661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [442.328660] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [442.353662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [442.354134] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX B/DDI B/PHY B: Too many retries, giving up. First error: -110

<7> [442.354166] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel

<7> [442.379667] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [442.404663] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [442.429662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [442.454662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [442.479661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [442.504661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [442.529662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [442.554662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [442.579661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [442.604662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [442.629662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [442.654662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [442.679661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [442.704662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [442.729662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [442.754661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [442.779662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [442.804666] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [442.829662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [442.854662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [442.879661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [442.904661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [442.929662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [442.954661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [442.979661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [443.004666] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [443.029662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [443.054662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [443.079661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [443.104661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [443.129661] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [443.154662] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [443.155111] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX B/DDI B/PHY B: Too many retries, giving up. First error: -110

<7> [443.155143] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [443.155526] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:247:DDI B/PHY B]

<7> [443.155908] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:247:DDI B/PHY B] Using DDC pin 0x2 (VBT)

<7> [443.156599] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:262:DDI C (TC)/PHY C]

<7> [443.156999] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:262:DDI C (TC)/PHY C] Using DDC pin 0x3 (VBT)

<7> [443.158053] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:98:pipe A] hw state readout: disabled

<7> [443.158838] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:167:pipe B] hw state readout: disabled

<7> [443.159580] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:236:pipe C] hw state readout: disabled

<7> [443.160004] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [443.160405] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] hw state readout: disabled, pipe A

<7> [443.160838] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] hw state readout: disabled, pipe A

<7> [443.161254] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] hw state readout: disabled, pipe A

<7> [443.161669] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] hw state readout: disabled, pipe A

<7> [443.162073] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:plane 6A] hw state readout: disabled, pipe A

<7> [443.162467] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:85:plane 7A] hw state readout: disabled, pipe A

<7> [443.162879] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:cursor A] hw state readout: disabled, pipe A

<7> [443.163294] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 1B] hw state readout: disabled, pipe B

<7> [443.163732] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 2B] hw state readout: disabled, pipe B

<7> [443.164133] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 3B] hw state readout: disabled, pipe B

<7> [443.164526] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:plane 4B] hw state readout: disabled, pipe B

<7> [443.164931] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:136:plane 5B] hw state readout: disabled, pipe B

<7> [443.165335] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:145:plane 6B] hw state readout: disabled, pipe B

<7> [443.165768] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:154:plane 7B] hw state readout: disabled, pipe B

<7> [443.166174] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:163:cursor B] hw state readout: disabled, pipe B

<7> [443.166566] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 1C] hw state readout: disabled, pipe C

<7> [443.166970] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:plane 2C] hw state readout: disabled, pipe C

<7> [443.167366] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:187:plane 3C] hw state readout: disabled, pipe C

<7> [443.167799] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:196:plane 4C] hw state readout: disabled, pipe C

<7> [443.168210] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:205:plane 5C] hw state readout: disabled, pipe C

<7> [443.168602] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:214:plane 6C] hw state readout: disabled, pipe C

<7> [443.169008] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:223:plane 7C] hw state readout: disabled, pipe C

<7> [443.169403] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:232:cursor C] hw state readout: disabled, pipe C

<7> [443.169838] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:238:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [443.170248] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:247:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [443.170612] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:249:DP-MST A] hw state readout: disabled, pipe A

<7> [443.171005] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:250:DP-MST B] hw state readout: disabled, pipe B

<7> [443.171365] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:251:DP-MST C] hw state readout: disabled, pipe C

<7> [443.171844] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:262:DDI C (TC)/PHY C] hw state readout: disabled, pipe A

<7> [443.172245] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 0

<7> [443.172701] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [443.173122] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 4 hw state readout: pipe_mask 0x0, on 0

<7> [443.173632] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:239:eDP-1] hw state readout: disabled

<7> [443.174082] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:248:DP-1] hw state readout: disabled

<7> [443.174506] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:257:HDMI-A-1] hw state readout: disabled

<7> [443.174966] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:263:HDMI-A-2] hw state readout: disabled

<7> [443.175342] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [443.175727] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] min_cdclk 0 kHz

<7> [443.176089] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] min_cdclk 0 kHz

<7> [443.176440] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] min_cdclk 0 kHz

<7> [443.176806] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] min_cdclk 0 kHz

<7> [443.177173] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:plane 6A] min_cdclk 0 kHz

<7> [443.177553] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:85:plane 7A] min_cdclk 0 kHz

<7> [443.177943] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:cursor A] min_cdclk 0 kHz

<7> [443.178313] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [443.178707] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 1B] min_cdclk 0 kHz

<7> [443.179066] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 2B] min_cdclk 0 kHz

<7> [443.179434] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 3B] min_cdclk 0 kHz

<7> [443.179847] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:plane 4B] min_cdclk 0 kHz

<7> [443.180217] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:136:plane 5B] min_cdclk 0 kHz

<7> [443.180575] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:145:plane 6B] min_cdclk 0 kHz

<7> [443.180949] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:154:plane 7B] min_cdclk 0 kHz

<7> [443.181306] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:163:cursor B] min_cdclk 0 kHz

<7> [443.181673] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [443.182064] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 1C] min_cdclk 0 kHz

<7> [443.182448] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:plane 2C] min_cdclk 0 kHz

<7> [443.182840] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:187:plane 3C] min_cdclk 0 kHz

<7> [443.183207] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:196:plane 4C] min_cdclk 0 kHz

<7> [443.183562] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:205:plane 5C] min_cdclk 0 kHz

<7> [443.183927] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:214:plane 6C] min_cdclk 0 kHz

<7> [443.184287] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:223:plane 7C] min_cdclk 0 kHz

<7> [443.184694] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:232:cursor C] min_cdclk 0 kHz

<7> [443.185074] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [443.208803] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:98:pipe A] enable: no [setup_hw_state]

<7> [443.209252] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:167:pipe B] enable: no [setup_hw_state]

<7> [443.209624] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:236:pipe C] enable: no [setup_hw_state]

<7> [443.210024] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:98:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [443.210435] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:167:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [443.210861] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:236:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [443.211526] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [443.211873] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [443.212185] i915 0000:00:02.0: [drm:i915_gem_init [i915]] No clock gating settings or workarounds applied.

<7> [443.212565] MCR Steering: Default steering: group=0x0, instance=0x0

<7> [443.212591] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 9 GT workarounds on global

<7> [443.217148] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 engine workarounds on rcs'0

<7> [443.217574] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 4 whitelist workarounds on rcs'0

<7> [443.217974] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 context workarounds on rcs'0

<7> [443.221169] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 whitelist workarounds on bcs'0

<7> [443.222244] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 4 whitelist workarounds on vcs'0

<7> [443.223271] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 whitelist workarounds on vecs'0

<7> [443.240626] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [443.241058] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [443.241371] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [443.241706] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [443.242905] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:98:pipe A] not active, skipping

<7> [443.243321] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:167:pipe B] not active, skipping

<7> [443.243721] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:236:pipe C] not active, skipping

<7> [443.244087] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [443.244497] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [443.254609] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:239:eDP-1] backlight device intel_backlight registered

<7> [443.255282] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [443.257224] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_B

<7> [443.259358] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:239:eDP-1] generating connector hotplug event

<7> [443.260413] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [443.262084] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:248:DP-1] generating connector hotplug event

<7> [443.262859] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:257:HDMI-A-1] generating connector hotplug event

<7> [443.263551] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:263:HDMI-A-2] generating connector hotplug event

<6> [443.263804] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0

<7> [443.267371] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 4 outputs detected

<6> [443.299845] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [443.307208] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input38

<6> [443.308162] sdhci-pci 0000:00:14.5: SDHCI controller found [8086:4df8] (rev 0)

<7> [443.308508] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x810 (init value 0x810)

<7> [443.310154] [drm:drm_client_modeset_probe]

<7> [443.310224] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:239:eDP-1]

<7> [443.310240] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:239:eDP-1]

<7> [443.310635] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:239:eDP-1] status updated from unknown to disconnected

<7> [443.310672] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:239:eDP-1] disconnected

<7> [443.310683] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:239:eDP-1] EDID changed, epoch counter 2

<7> [443.310714] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:248:DP-1]

<7> [443.310725] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:248:DP-1]

<7> [443.311118] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:248:DP-1] status updated from unknown to disconnected

<7> [443.311128] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:248:DP-1] disconnected

<7> [443.311137] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1]

<7> [443.311153] i915 display info: display version: 11

<7> [443.311163] i915 display info: cursor_needs_physical: no

<7> [443.311168] i915 display info: has_cdclk_crawl: no

<7> [443.311172] i915 display info: has_cdclk_squash: no

<7> [443.311176] i915 display info: has_ddi: yes

<7> [443.311180] i915 display info: has_dp_mst: yes

<7> [443.311184] i915 display info: has_dsb: no

<7> [443.311187] i915 display info: has_fpga_dbg: yes

<7> [443.311191] i915 display info: has_gmch: no

<7> [443.311194] i915 display info: has_hotplug: yes

<7> [443.311198] i915 display info: has_hti: no

<7> [443.311201] i915 display info: has_ipc: yes

<7> [443.311205] i915 display info: has_overlay: no

<7> [443.311208] i915 display info: has_psr: yes

<7> [443.311212] i915 display info: has_psr_hw_tracking: yes

<7> [443.311215] i915 display info: overlay_needs_physical: no

<7> [443.311219] i915 display info: supports_tv: no

<7> [443.311222] i915 display info: has_hdcp: no

<7> [443.311226] i915 display info: has_dmc: yes

<7> [443.311230] i915 display info: has_dsc: yes

<7> [443.311148] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1]

<7> [443.311239] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4

<7> [443.311530] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] status updated from unknown to disconnected

<7> [443.312013] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] disconnected

<7> [443.312028] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2]

<7> [443.312038] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:263:HDMI-A-2]

<7> [443.312430] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2] status updated from unknown to disconnected

<7> [443.312450] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2] disconnected

<7> [443.312459] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [443.312467] [drm:drm_client_modeset_probe] connector 239 enabled? no

<7> [443.312474] [drm:drm_client_modeset_probe] connector 248 enabled? no

<7> [443.312480] [drm:drm_client_modeset_probe] connector 257 enabled? no

<7> [443.312485] [drm:drm_client_modeset_probe] connector 263 enabled? no

<7> [443.312553] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [443.312573] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [443.312603] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [443.312620] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [443.313352] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [443.313794] i915 device info: pciid=0x4e51 rev=0x01 platform=JASPERLAKE (subplatform=0x0) gen=11

<7> [443.313803] i915 device info: graphics version: 11

<7> [443.313807] i915 device info: media version: 11

<7> [443.313811] i915 device info: graphics stepping: B0

<7> [443.313814] i915 device info: media stepping: B0

<7> [443.313818] i915 device info: display stepping: B0

<7> [443.313821] i915 device info: base die stepping: **

<7> [443.313827] i915 device info: memory-regions: 0x21

<7> [443.313831] i915 device info: page-sizes: 0x211000

<7> [443.313834] i915 device info: platform: JASPERLAKE

<7> [443.313838] i915 device info: ppgtt-size: 36

<7> [443.313841] i915 device info: ppgtt-type: 2

<7> [443.313845] i915 device info: dma_mask_size: 39

<7> [443.313848] i915 device info: is_mobile: no

<7> [443.313852] i915 device info: is_lp: no

<7> [443.313855] i915 device info: require_force_probe: no

<7> [443.313858] i915 device info: is_dgfx: no

<7> [443.313862] i915 device info: has_64bit_reloc: yes

<7> [443.313865] i915 device info: has_64k_pages: no

<7> [443.313868] i915 device info: gpu_reset_clobbers_display: no

<7> [443.313872] i915 device info: has_reset_engine: yes

<7> [443.313875] i915 device info: has_3d_pipeline: yes

<7> [443.313879] i915 device info: has_flat_ccs: no

<7> [443.313882] i915 device info: has_global_mocs: no

<7> [443.313885] i915 device info: has_gmd_id: no

<7> [443.313889] i915 device info: has_gt_uc: yes

<7> [443.313892] i915 device info: has_heci_pxp: no

<7> [443.313895] i915 device info: has_heci_gscfi: no

<7> [443.313899] i915 device info: has_guc_deprivilege: no

<7> [443.313902] i915 device info: has_guc_tlb_invalidation: no

<7> [443.313906] i915 device info: has_l3_ccs_read: no

<7> [443.313909] i915 device info: has_l3_dpf: no

<7> [443.313912] i915 device info: has_llc: yes

<7> [443.313916] i915 device info: has_logical_ring_contexts: yes

<7> [443.313919] i915 device info: has_logical_ring_elsq: yes

<7> [443.313923] i915 device info: has_media_ratio_mode: no

<7> [443.313926] i915 device info: has_mslice_steering: no

<7> [443.313930] i915 device info: has_oa_bpc_reporting: no

<7> [443.313933] i915 device info: has_oa_slice_contrib_limits: no

<7> [443.313937] i915 device info: has_oam: no

<7> [443.313940] i915 device info: has_one_eu_per_fuse_bit: no

<7> [443.313943] i915 device info: has_pxp: no

<7> [443.313947] i915 device info: has_rc6: yes

<7> [443.313950] i915 device info: has_rc6p: no

<7> [443.313953] i915 device info: has_rps: yes

<7> [443.313957] i915 device info: has_runtime_pm: yes

<7> [443.313960] i915 device info: has_snoop: no

<7> [443.313963] i915 device info: has_coherent_ggtt: no

<7> [443.313967] i915 device info: tuning_thread_rr_after_dep: no

<7> [443.313970] i915 device info: unfenced_needs_alignment: no

<7> [443.313973] i915 device info: hws_needs_physical: no

<7> [443.313976] i915 device info: has_pooled_eu: no

<7> [443.313980] i915 device info: rawclk rate: 19200 kHz

<7> [443.313984] i915 device info: iommu: enabled

<7> [443.313988] i915 device info: available engines: 40403

<7> [443.313992] i915 device info: slice total: 1, mask=0001

<7> [443.313996] i915 device info: subslice total: 4

<7> [443.313999] i915 device info: slice0: 4 subslices, mask=0000000f

<7> [443.314004] i915 device info: EU total: 16

<7> [443.314007] i915 device info: EU per subslice: 4

<7> [443.314011] i915 device info: has slice power gating: yes

<7> [443.314014] i915 device info: has subslice power gating: yes

<7> [443.314017] i915 device info: has EU power gating: yes

<6> [443.314022] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [443.314026] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [443.314030] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [443.314039] i915: Performing live selftests with st_random_seed=0x773aa4b6 st_timeout=500

<6> [443.314082] i915: Running i915_gem_mman_live_selftests/igt_partial_tiling

<7> [443.338320] [drm:drm_client_modeset_probe]

<7> [443.338391] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:239:eDP-1]

<7> [443.338408] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:239:eDP-1]

<7> [443.340093] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:239:eDP-1] disconnected

<7> [443.340113] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:248:DP-1]

<7> [443.340126] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:248:DP-1]

<7> [443.340538] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:248:DP-1] disconnected

<7> [443.340548] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1]

<7> [443.340559] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1]

<7> [443.343671] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:257:HDMI-A-1] disconnected

<7> [443.343687] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2]

<7> [443.343699] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:263:HDMI-A-2]

<7> [443.344103] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:263:HDMI-A-2] disconnected

<7> [443.344112] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [443.344121] [drm:drm_client_modeset_probe] connector 239 enabled? no

<7> [443.344128] [drm:drm_client_modeset_probe] connector 248 enabled? no

<7> [443.344134] [drm:drm_client_modeset_probe] connector 257 enabled? no

<7> [443.344139] [drm:drm_client_modeset_probe] connector 263 enabled? no

<7> [443.344207] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [443.344227] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [443.344255] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [443.344273] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [443.360795] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [443.361587] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [443.935927] check_partial_mappings: timed out after tiling=0 stride=0

<7> [444.436692] check_partial_mappings: timed out after tiling=1 stride=262144

<7> [444.553638] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 turning VDD off

<7> [444.554178] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [444.554590] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A

<7> [444.555217] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [444.555699] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [444.556115] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [444.557364] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010

<7> [444.557542] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [444.557759] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:238:DDI A/PHY A] - long

<7> [444.558152] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [444.558719] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:238:DDI A/PHY A]

<7> [444.937760] check_partial_mappings: timed out after tiling=2 stride=262144

<6> [444.967934] i915: Running i915_gem_mman_live_selftests/igt_smoke_tiling

<6> [445.520104] igt_smoke_tiling: Completed 1 trials

<6> [445.658691] i915: Running i915_gem_mman_live_selftests/igt_mmap_offset_exhaustion

<7> [445.658814] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<6> [445.699938] i915: Running i915_gem_mman_live_selftests/igt_mmap

<7> [445.701012] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [445.712668] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [445.718027] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [445.721847] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [445.727684] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [445.792726] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [447.699578] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<6> [449.055901] i915: Running i915_gem_mman_live_selftests/igt_mmap_migrate

<6> [449.055938] i915: Running i915_gem_mman_live_selftests/igt_mmap_access

<7> [449.056083] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [449.059102] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [449.060821] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [449.062418] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<6> [449.075127] i915: Running i915_gem_mman_live_selftests/igt_mmap_revoke

<7> [449.075277] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [449.078134] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<6> [449.088962] i915: Running i915_gem_mman_live_selftests/igt_mmap_gpu

<7> [449.089221] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [449.092138] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [449.095636] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [449.111800] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [449.112616] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [449.113573] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [449.113999] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [449.114399] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4

<7> [449.138239] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [449.190120] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<7> [449.190616] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [449.191598] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:238:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [449.192215] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<4> [449.240392] i915: probe of 0000:00:02.0 failed with error -25

<6> [449.533454] [IGT] i915_selftest: finished subtest mman, SUCCESS

Results for igt@i915_selftest@live@mman