Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 1.28-g21e9f1e49 (x86_64) (Linux: 6.8.0-rc5-linus-v6.8-rc5-gb401b621758e+ x86_64)
Out 
Using IGT_SRANDOM=1708290629 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.028s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.028s)
Dmesg
<6> [199.503516] Console: switching to colour dummy device 80x25
<6> [199.503961] [IGT] kms_force_connector_basic: executing
<7> [199.519132] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [199.521144] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [199.526310] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [199.528015] [drm:status_store] [CONNECTOR:275:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [199.528028] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [199.528040] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [199.528449] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [199.528488] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [199.528495] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [199.528851] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [199.529040] [drm:status_store] [CONNECTOR:281:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [199.529047] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2]
<7> [199.529069] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:281:HDMI-A-2]
<7> [199.529416] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2] disconnected
<7> [199.529450] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2]
<7> [199.529455] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:281:HDMI-A-2]
<7> [199.529778] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2] disconnected
<7> [199.529806] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [199.529812] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [199.530145] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<6> [199.530589] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [199.530767] [drm:status_store] [CONNECTOR:275:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [199.530774] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [199.530781] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [199.531231] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [199.531450] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [199.531874] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [199.532109] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [199.532125] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [199.532332] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc3. force bit now 1
<7> [199.538204] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [199.538216] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc3. force bit now 0
<7> [199.538428] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] status updated from disconnected to connected
<7> [199.538607] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] probed modes :
<7> [199.538612] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [199.538621] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [199.538628] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [199.538634] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [199.538641] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [199.538683] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [199.538690] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [199.539136] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [199.539339] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [199.539750] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [199.539956] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [199.539966] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [199.540174] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc3. force bit now 1
<7> [199.546066] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [199.546077] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc3. force bit now 0
<7> [199.546333] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] probed modes :
<7> [199.546338] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [199.546345] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [199.546351] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [199.546357] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [199.546362] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [199.546606] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:275:HDMI-A-1] EDID override set
<7> [199.546633] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [199.546639] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [199.546870] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:275:HDMI-A-1] ELD monitor IGT
<7> [199.546876] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:275:HDMI-A-1] ELD size 24, SAD count 0
<7> [199.547132] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [199.547329] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [199.547735] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [199.547942] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [199.548091] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [199.548099] [drm:drm_mode_prune_invalid] Not using 800x600 mode: STALE
<7> [199.548108] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [199.548114] [drm:drm_mode_prune_invalid] Not using 848x480 mode: STALE
<7> [199.548123] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] probed modes :
<7> [199.548128] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [199.548134] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [199.548140] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [199.548146] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [199.548152] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [199.548158] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [199.548337] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:275:HDMI-A-1] EDID override set
<7> [199.548371] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [199.548377] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [199.548614] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:275:HDMI-A-1] ELD monitor IGT
<7> [199.548621] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:275:HDMI-A-1] ELD size 24, SAD count 0
<7> [199.548627] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:275:HDMI-A-1] EDID changed, epoch counter 4
<7> [199.548875] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [199.549087] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [199.549489] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [199.549686] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [199.549803] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [199.549810] [drm:drm_mode_prune_invalid] Not using 1400x1050 mode: STALE
<7> [199.549819] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] probed modes :
<7> [199.549823] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [199.549829] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [199.549835] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [199.549841] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [199.549846] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [199.549990] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:275:HDMI-A-1] EDID override reset
<7> [199.550019] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [199.550025] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [199.550466] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [199.550651] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [199.551050] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [199.551256] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [199.551265] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [199.551450] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc3. force bit now 1
<7> [199.557278] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [199.557288] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc3. force bit now 0
<7> [199.557472] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:275:HDMI-A-1] EDID changed, epoch counter 5
<7> [199.557539] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [199.557546] [drm:drm_mode_prune_invalid] Not using 1920x1080 mode: STALE
<7> [199.557555] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [199.557561] [drm:drm_mode_prune_invalid] Not using 1280x720 mode: STALE
<7> [199.557569] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] probed modes :
<7> [199.557574] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [199.557580] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [199.557585] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [199.557591] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [199.557597] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [199.557772] [drm:status_store] [CONNECTOR:275:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [199.557778] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [199.557785] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [199.558115] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] status updated from connected to disconnected
<7> [199.558130] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [199.558186] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [199.558193] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [199.558490] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<6> [199.558957] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [199.559159] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [199.560485] [drm:status_store] [CONNECTOR:236:eDP-1] force updated from 0 to 0 or reprobing
<7> [199.560492] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1]
<7> [199.560500] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]
<7> [199.562149] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7> [199.563160] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [199.563368] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [199.563578] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [199.563785] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [199.564013] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<7> [199.564021] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [199.564028] [drm] DisplayID checksum invalid, remainder is 248
<7> [199.564031] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [199.564036] [drm] DisplayID checksum invalid, remainder is 248
<7> [199.564040] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [199.564046] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [199.564051] [drm] DisplayID checksum invalid, remainder is 248
<7> [199.564072] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor
<7> [199.564079] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [199.564083] [drm] DisplayID checksum invalid, remainder is 248
<7> [199.564087] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0
<7> [199.564094] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [199.564098] [drm] DisplayID checksum invalid, remainder is 248
<7> [199.564118] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: yes
<7> [199.564323] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [199.565499] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [199.565699] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [199.566715] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [199.566721] [drm] DisplayID checksum invalid, remainder is 248
<7> [199.566724] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [199.566729] [drm] DisplayID checksum invalid, remainder is 248
<7> [199.566732] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [199.566737] [drm] DisplayID checksum invalid, remainder is 248
<7> [199.566779] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes :
<7> [199.566784] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [199.566842] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1]
<7> [199.566848] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]
<7> [199.568069] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7> [199.569085] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [199.569315] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [199.569550] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [199.569774] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [199.570012] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<7> [199.570019] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [199.570023] [drm] DisplayID checksum invalid, remainder is 248
<7> [199.570027] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [199.570031] [drm] DisplayID checksum invalid, remainder is 248
<7> [199.570034] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [199.570040] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [199.570044] [drm] DisplayID checksum invalid, remainder is 248
<7> [199.570047] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor
<7> [199.570072] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [199.570076] [drm] DisplayID checksum invalid, remainder is 248
<7> [199.570080] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0
<7> [199.570086] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [199.570090] [drm] DisplayID checksum invalid, remainder is 248
<7> [199.570107] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: yes
<7> [199.570329] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [199.571359] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [199.571585] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [199.572544] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [199.572549] [drm] DisplayID checksum invalid, remainder is 248
<7> [199.572552] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [199.572557] [drm] DisplayID checksum invalid, remainder is 248
<7> [199.572560] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [199.572564] [drm] DisplayID checksum invalid, remainder is 248
<7> [199.572601] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes :
<7> [199.572606] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [199.572749] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:236:eDP-1] EDID override reset
<7> [199.572774] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1]
<7> [199.572781] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]
<7> [199.573947] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7> [199.574958] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [199.575181] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [199.575401] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [199.575622] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [199.575859] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<7> [199.575866] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [199.575871] [drm] DisplayID checksum invalid, remainder is 248
<7> [199.575874] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [199.575878] [drm] DisplayID checksum invalid, remainder is 248
<7> [199.575881] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [199.575887] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [199.575891] [drm] DisplayID checksum invalid, remainder is 248
<7> [199.575895] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor
<7> [199.575900] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [199.575904] [drm] DisplayID checksum invalid, remainder is 248
<7> [199.575908] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0
<7> [199.575913] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [199.575917] [drm] DisplayID checksum invalid, remainder is 248
<7> [199.575933] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: yes
<7> [199.576159] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [199.577302] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [199.577511] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [199.578494] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [199.578499] [drm] DisplayID checksum invalid, remainder is 248
<7> [199.578502] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [199.578507] [drm] DisplayID checksum invalid, remainder is 248
<7> [199.578510] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [199.578514] [drm] DisplayID checksum invalid, remainder is 248
<7> [199.578549] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes :
<7> [199.578554] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [199.578713] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:245:DP-1] EDID override reset
<7> [199.578736] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1]
<7> [199.578742] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1]
<7> [199.579067] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1] disconnected
<7> [199.579215] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:258:DP-2] EDID override reset
<7> [199.579239] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:258:DP-2]
<7> [199.579246] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:258:DP-2]
<7> [199.579561] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:258:DP-2] disconnected
<7> [199.579705] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:267:DP-3] EDID override reset
<7> [199.579727] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:DP-3]
<7> [199.579733] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:267:DP-3]
<7> [199.580041] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:DP-3] disconnected
<7> [199.580252] [drm:status_store] [CONNECTOR:275:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [199.580259] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [199.580268] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [199.580608] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [199.580648] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [199.580654] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [199.580970] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [199.581101] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:275:HDMI-A-1] EDID override reset
<7> [199.581123] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [199.581129] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [199.581444] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [199.581625] [drm:status_store] [CONNECTOR:281:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [199.581631] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2]
<7> [199.581638] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:281:HDMI-A-2]
<7> [199.581958] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2] disconnected
<7> [199.581994] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2]
<7> [199.582000] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:281:HDMI-A-2]
<7> [199.582313] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2] disconnected
<7> [199.582425] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:281:HDMI-A-2] EDID override reset
<7> [199.582446] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2]
<7> [199.582451] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:281:HDMI-A-2]
<7> [199.582747] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2] disconnected
<6> [199.583546] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [199.583702] [drm:status_store] [CONNECTOR:275:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [199.583708] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [199.583715] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [199.584029] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [199.584125] [drm:status_store] [CONNECTOR:281:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [199.584131] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2]
<7> [199.584138] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:281:HDMI-A-2]
<7> [199.584447] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2] disconnected
<7> [199.584498] [drm:status_store] [CONNECTOR:236:eDP-1] force updated from 0 to 0 or reprobing
<7> [199.584503] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1]
<7> [199.584510] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]
<7> [199.585719] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7> [199.586695] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [199.586899] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [199.587123] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [199.587329] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [199.587558] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<7> [199.587566] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [199.587571] [drm] DisplayID checksum invalid, remainder is 248
<7> [199.587575] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [199.587580] [drm] DisplayID checksum invalid, remainder is 248
<7> [199.587583] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [199.587589] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [199.587594] [drm] DisplayID checksum invalid, remainder is 248
<7> [199.587597] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor
<7> [199.587603] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [199.587608] [drm] DisplayID checksum invalid, remainder is 248
<7> [199.587611] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0
<7> [199.587618] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [199.587622] [drm] DisplayID checksum invalid, remainder is 248
<7> [199.587640] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: yes
<7> [199.587845] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [199.589015] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [199.589226] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [199.590228] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [199.590234] [drm] DisplayID checksum invalid, remainder is 248
<7> [199.590237] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [199.590242] [drm] DisplayID checksum invalid, remainder is 248
<7> [199.590245] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [199.590250] [drm] DisplayID checksum invalid, remainder is 248
<7> [199.590288] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes :
<7> [199.590293] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [199.590587] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [199.608877] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0]
<7> [199.608889] [drm:drm_client_modeset_probe]
<7> [199.608945] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1]
<7> [199.608955] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]
<7> [199.610184] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7> [199.611207] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [199.611437] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [199.611669] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [199.611893] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [199.612193] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<7> [199.612202] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [199.612208] [drm] DisplayID checksum invalid, remainder is 248
<7> [199.612212] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [199.612217] [drm] DisplayID checksum invalid, remainder is 248
<7> [199.612220] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [199.612227] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [199.612231] [drm] DisplayID checksum invalid, remainder is 248
<7> [199.612235] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor
<7> [199.612241] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [199.612247] [drm] DisplayID checksum invalid, remainder is 248
<7> [199.612251] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0
<7> [199.612258] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [199.612262] [drm] DisplayID checksum invalid, remainder is 248
<7> [199.612284] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: yes
<7> [199.612503] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [199.613707] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [199.613926] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [199.614964] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [199.614970] [drm] DisplayID checksum invalid, remainder is 248
<7> [199.614973] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [199.614978] [drm] DisplayID checksum invalid, remainder is 248
<7> [199.614982] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [199.614986] [drm] DisplayID checksum invalid, remainder is 248
<7> [199.615030] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes :
<7> [199.615035] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [199.615044] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1]
<7> [199.615064] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1]
<7> [199.615381] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1] disconnected
<7> [199.615388] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:258:DP-2]
<7> [199.615394] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:258:DP-2]
<7> [199.615699] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:258:DP-2] disconnected
<7> [199.615705] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:DP-3]
<7> [199.615711] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:267:DP-3]
<7> [199.616015] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:DP-3] disconnected
<7> [199.616021] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [199.616027] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [199.616393] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [199.616400] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2]
<7> [199.616406] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:281:HDMI-A-2]
<7> [199.616721] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2] disconnected
<7> [199.616728] [drm:drm_client_modeset_probe] connector 236 enabled? yes
<7> [199.616734] [drm:drm_client_modeset_probe] connector 245 enabled? no
<7> [199.616738] [drm:drm_client_modeset_probe] connector 258 enabled? no
<7> [199.616742] [drm:drm_client_modeset_probe] connector 267 enabled? no
<7> [199.616747] [drm:drm_client_modeset_probe] connector 275 enabled? no
<7> [199.616751] [drm:drm_client_modeset_probe] connector 281 enabled? no
<7> [199.616799] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [199.616815] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236
<7> [199.616820] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0
<7> [199.616824] [drm:drm_client_modeset_probe] found mode 2880x1800
<7> [199.616828] [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7> [199.616852] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0)
<6> [199.642383] Console: switching to colour frame buffer device 360x112
Created at 2024-02-18 22:37:50