Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Skip

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Duration 0.19 seconds
Igt-Version 
IGT-Version: 1.28-g17a41dcf1 (x86_64) (Linux: 6.8.0-rc4-linus-v6.8-rc4-g841c35169323+ x86_64)
Out 
Using IGT_SRANDOM=1694159902 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Test requirement not met in function prune_stale_modes, file ../../../usr/src/igt-gpu-tools/tests/kms_force_connector_basic.c:279:
Test requirement: i != temp->count_modes
1400x1050 not on mode list
Subtest prune-stale-modes: SKIP (0.189s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SKIP (0.189s)
Dmesg
<6> [112.892716] Console: switching to colour dummy device 80x25
<6> [112.892747] [IGT] kms_force_connector_basic: executing
<7> [112.905464] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [112.906558] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [112.916001] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [112.917265] [drm:status_store] [CONNECTOR:249:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [112.917277] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [112.917286] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [112.917563] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [112.917596] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [112.917602] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [112.917868] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [112.917981] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [112.917987] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [112.918240] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<6> [112.918302] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [112.918449] [drm:status_store] [CONNECTOR:249:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [112.918456] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [112.918462] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [112.971148] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [112.976824] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.976845] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.977082] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [112.982711] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [112.982726] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [112.982958] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] status updated from disconnected to connected
<7> [112.983030] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [112.983040] [drm:drm_mode_prune_invalid] Not using 640x480 mode: CLOCK_RANGE
<7> [112.983050] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [112.983057] [drm:drm_mode_prune_invalid] Not using 848x480 mode: CLOCK_RANGE
<7> [112.983066] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] probed modes :
<7> [112.983071] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [112.983078] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [112.983084] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [112.983146] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [112.983153] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [113.033234] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [113.033548] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [113.033779] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [113.036026] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [113.042314] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [113.042336] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [113.042534] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [113.048592] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [113.048603] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [113.048791] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.049108] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [113.049117] [drm:drm_mode_prune_invalid] Not using 640x480 mode: CLOCK_RANGE
<7> [113.049125] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [113.049132] [drm:drm_mode_prune_invalid] Not using 848x480 mode: CLOCK_RANGE
<7> [113.049140] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] probed modes :
<7> [113.049147] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [113.049153] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [113.049158] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [113.049425] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:249:HDMI-A-1] EDID override set
<7> [113.049453] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [113.049460] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [113.049666] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.049945] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:249:HDMI-A-1] ELD monitor IGT
<7> [113.049951] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:249:HDMI-A-1] ELD size 24, SAD count 0
<7> [113.100237] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [113.106552] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [113.106576] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.106931] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [113.106941] [drm:drm_mode_prune_invalid] Not using 800x600 mode: STALE
<7> [113.106949] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [113.106956] [drm:drm_mode_prune_invalid] Not using 1400x1050 mode: CLOCK_RANGE
<7> [113.106964] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [113.106969] [drm:drm_mode_prune_invalid] Not using 640x480 mode: CLOCK_RANGE
<7> [113.106977] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] probed modes :
<7> [113.106982] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [113.106988] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [113.106994] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [113.106999] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<6> [113.107169] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SKIP
<7> [113.107351] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [113.108499] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:236:DP-1] EDID override reset
<7> [113.108523] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1]
<7> [113.108530] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]
<7> [113.108754] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.109215] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1] disconnected
<7> [113.109400] [drm:status_store] [CONNECTOR:249:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [113.109407] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [113.109414] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [113.109834] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] status updated from connected to disconnected
<7> [113.109850] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [113.109855] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:249:HDMI-A-1] EDID changed, epoch counter 5
<7> [113.110261] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [113.110274] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [113.110715] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [113.110850] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:249:HDMI-A-1] EDID override reset
<7> [113.110911] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [113.110918] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [113.111325] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [113.111448] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:255:DP-2] EDID override reset
<7> [113.111468] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2]
<7> [113.111474] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]
<7> [113.111938] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2] disconnected
<7> [113.112060] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:264:DP-3] EDID override reset
<7> [113.112083] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-3]
<7> [113.112089] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]
<7> [113.112518] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-3] disconnected
<7> [113.112632] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:273:DP-4] EDID override reset
<7> [113.112654] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-4]
<7> [113.112659] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]
<7> [113.113121] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-4] disconnected
<7> [113.113258] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:282:DP-5] EDID override reset
<7> [113.113276] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-5]
<7> [113.113282] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]
<7> [113.113861] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-5] disconnected
<6> [113.114266] [IGT] kms_force_connector_basic: exiting, ret=77
<7> [113.114402] [drm:status_store] [CONNECTOR:249:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [113.114410] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [113.114417] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [113.114825] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [113.115157] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [113.140570] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [113.141007] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [113.141668] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0]
<7> [113.141693] [drm:drm_client_modeset_probe]
<7> [113.142601] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1]
<7> [113.142646] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]
<7> [113.143079] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:DP-1] disconnected
<7> [113.143089] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1]
<7> [113.143096] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]
<7> [113.143370] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:249:HDMI-A-1] disconnected
<7> [113.143376] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2]
<7> [113.143382] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]
<7> [113.143793] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:255:DP-2] disconnected
<7> [113.143800] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-3]
<7> [113.143806] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]
<7> [113.144176] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:264:DP-3] disconnected
<7> [113.144183] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-4]
<7> [113.144189] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:273:DP-4]
<7> [113.144484] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:273:DP-4] disconnected
<7> [113.144490] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-5]
<7> [113.144496] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:282:DP-5]
<7> [113.144786] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:282:DP-5] disconnected
<7> [113.144792] [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [113.144802] [drm:drm_client_modeset_probe] connector 236 enabled? no
<7> [113.144808] [drm:drm_client_modeset_probe] connector 249 enabled? no
<7> [113.144811] [drm:drm_client_modeset_probe] connector 255 enabled? no
<7> [113.144815] [drm:drm_client_modeset_probe] connector 264 enabled? no
<7> [113.144819] [drm:drm_client_modeset_probe] connector 273 enabled? no
<7> [113.144822] [drm:drm_client_modeset_probe] connector 282 enabled? no
<7> [113.145011] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [113.145033] [drm:drm_client_modeset_probe] picking CRTCs for 1024x768 config
<6> [113.147159] Console: switching to colour frame buffer device 128x48
Created at 2024-02-11 22:21:46