Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 1.28-g17a41dcf1 (x86_64) (Linux: 6.8.0-rc4-linus-v6.8-rc4-g841c35169323+ x86_64)
Out 
Using IGT_SRANDOM=1707683974 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.028s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.028s)
Dmesg
<6> [191.084952] Console: switching to colour dummy device 80x25
<6> [191.085426] [IGT] kms_force_connector_basic: executing
<7> [191.101530] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [191.103131] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [191.113461] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [191.115149] [drm:status_store] [CONNECTOR:275:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [191.115162] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [191.115174] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [191.115557] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [191.115595] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [191.115601] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [191.115951] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [191.116153] [drm:status_store] [CONNECTOR:281:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [191.116160] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2]
<7> [191.116166] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:281:HDMI-A-2]
<7> [191.116520] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2] disconnected
<7> [191.116552] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2]
<7> [191.116558] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:281:HDMI-A-2]
<7> [191.116891] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2] disconnected
<7> [191.116919] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [191.116924] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [191.117259] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<6> [191.117699] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [191.117880] [drm:status_store] [CONNECTOR:275:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [191.117887] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [191.117895] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [191.118409] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [191.118619] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [191.119045] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [191.119271] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [191.119287] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [191.119489] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc3. force bit now 1
<7> [191.125384] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [191.125396] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc3. force bit now 0
<7> [191.125607] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] status updated from disconnected to connected
<7> [191.125780] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] probed modes :
<7> [191.125785] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [191.125795] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [191.125801] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [191.125807] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [191.125814] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [191.125858] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [191.125865] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [191.126334] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [191.126540] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [191.126957] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [191.127175] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [191.127186] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [191.127380] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc3. force bit now 1
<7> [191.133247] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [191.133258] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc3. force bit now 0
<7> [191.133517] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] probed modes :
<7> [191.133522] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [191.133528] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [191.133534] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [191.133540] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [191.133546] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [191.133782] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:275:HDMI-A-1] EDID override set
<7> [191.133806] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [191.133812] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [191.134044] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:275:HDMI-A-1] ELD monitor IGT
<7> [191.134050] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:275:HDMI-A-1] ELD size 24, SAD count 0
<7> [191.134309] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [191.134499] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [191.134897] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [191.135112] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [191.135241] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [191.135248] [drm:drm_mode_prune_invalid] Not using 800x600 mode: STALE
<7> [191.135257] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [191.135264] [drm:drm_mode_prune_invalid] Not using 848x480 mode: STALE
<7> [191.135273] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] probed modes :
<7> [191.135278] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [191.135284] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [191.135290] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [191.135296] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [191.135302] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [191.135309] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [191.135479] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:275:HDMI-A-1] EDID override set
<7> [191.135510] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [191.135516] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [191.135752] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:275:HDMI-A-1] ELD monitor IGT
<7> [191.135758] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:275:HDMI-A-1] ELD size 24, SAD count 0
<7> [191.135764] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:275:HDMI-A-1] EDID changed, epoch counter 4
<7> [191.136007] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [191.136213] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [191.136613] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [191.136812] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [191.136928] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [191.136936] [drm:drm_mode_prune_invalid] Not using 1400x1050 mode: STALE
<7> [191.136945] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] probed modes :
<7> [191.136950] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [191.136956] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [191.136962] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [191.136968] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [191.136974] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [191.137133] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:275:HDMI-A-1] EDID override reset
<7> [191.137164] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [191.137170] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [191.137609] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [191.137808] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [191.138224] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [191.138421] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [191.138430] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [191.138616] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc3. force bit now 1
<7> [191.144469] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [191.144479] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc3. force bit now 0
<7> [191.144664] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:275:HDMI-A-1] EDID changed, epoch counter 5
<7> [191.144733] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [191.144740] [drm:drm_mode_prune_invalid] Not using 1920x1080 mode: STALE
<7> [191.144749] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [191.144755] [drm:drm_mode_prune_invalid] Not using 1280x720 mode: STALE
<7> [191.144764] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] probed modes :
<7> [191.144768] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [191.144774] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [191.144780] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [191.144786] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [191.144791] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [191.144977] [drm:status_store] [CONNECTOR:275:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [191.144983] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [191.144991] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [191.145349] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] status updated from connected to disconnected
<7> [191.145365] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [191.145420] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [191.145426] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [191.145745] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<6> [191.146225] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [191.146386] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [191.147713] [drm:status_store] [CONNECTOR:236:eDP-1] force updated from 0 to 0 or reprobing
<7> [191.147722] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1]
<7> [191.147732] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]
<7> [191.148953] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7> [191.149958] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [191.150190] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [191.150408] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [191.150624] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [191.150864] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<7> [191.150874] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [191.150881] [drm] DisplayID checksum invalid, remainder is 248
<7> [191.150884] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [191.150889] [drm] DisplayID checksum invalid, remainder is 248
<7> [191.150893] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [191.150899] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [191.150904] [drm] DisplayID checksum invalid, remainder is 248
<7> [191.150907] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor
<7> [191.150914] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [191.150918] [drm] DisplayID checksum invalid, remainder is 248
<7> [191.150922] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0
<7> [191.150928] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [191.150933] [drm] DisplayID checksum invalid, remainder is 248
<7> [191.150957] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: yes
<7> [191.151183] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [191.152349] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [191.152570] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [191.153634] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [191.153640] [drm] DisplayID checksum invalid, remainder is 248
<7> [191.153643] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [191.153648] [drm] DisplayID checksum invalid, remainder is 248
<7> [191.153652] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [191.153656] [drm] DisplayID checksum invalid, remainder is 248
<7> [191.153702] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes :
<7> [191.153707] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [191.153749] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1]
<7> [191.153755] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]
<7> [191.154861] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7> [191.155807] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [191.156012] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [191.156235] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [191.156441] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [191.156663] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<7> [191.156671] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [191.156675] [drm] DisplayID checksum invalid, remainder is 248
<7> [191.156678] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [191.156682] [drm] DisplayID checksum invalid, remainder is 248
<7> [191.156685] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [191.156691] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [191.156694] [drm] DisplayID checksum invalid, remainder is 248
<7> [191.156698] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor
<7> [191.156703] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [191.156707] [drm] DisplayID checksum invalid, remainder is 248
<7> [191.156710] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0
<7> [191.156715] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [191.156719] [drm] DisplayID checksum invalid, remainder is 248
<7> [191.156735] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: yes
<7> [191.156943] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [191.158091] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [191.158298] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [191.159261] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [191.159266] [drm] DisplayID checksum invalid, remainder is 248
<7> [191.159268] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [191.159272] [drm] DisplayID checksum invalid, remainder is 248
<7> [191.159275] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [191.159279] [drm] DisplayID checksum invalid, remainder is 248
<7> [191.159314] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes :
<7> [191.159319] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [191.159457] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:236:eDP-1] EDID override reset
<7> [191.159481] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1]
<7> [191.159487] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]
<7> [191.160616] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7> [191.161508] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [191.161710] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [191.161917] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [191.162136] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [191.162355] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<7> [191.162362] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [191.162366] [drm] DisplayID checksum invalid, remainder is 248
<7> [191.162369] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [191.162373] [drm] DisplayID checksum invalid, remainder is 248
<7> [191.162376] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [191.162382] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [191.162386] [drm] DisplayID checksum invalid, remainder is 248
<7> [191.162390] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor
<7> [191.162396] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [191.162400] [drm] DisplayID checksum invalid, remainder is 248
<7> [191.162403] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0
<7> [191.162409] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [191.162413] [drm] DisplayID checksum invalid, remainder is 248
<7> [191.162428] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: yes
<7> [191.162626] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [191.163731] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [191.163926] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [191.164874] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [191.164879] [drm] DisplayID checksum invalid, remainder is 248
<7> [191.164882] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [191.164886] [drm] DisplayID checksum invalid, remainder is 248
<7> [191.164889] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [191.164893] [drm] DisplayID checksum invalid, remainder is 248
<7> [191.164927] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes :
<7> [191.164933] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [191.165093] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:245:DP-1] EDID override reset
<7> [191.165116] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1]
<7> [191.165122] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1]
<7> [191.165432] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1] disconnected
<7> [191.165569] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:258:DP-2] EDID override reset
<7> [191.165591] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:258:DP-2]
<7> [191.165596] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:258:DP-2]
<7> [191.165904] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:258:DP-2] disconnected
<7> [191.166038] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:267:DP-3] EDID override reset
<7> [191.166106] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:DP-3]
<7> [191.166112] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:267:DP-3]
<7> [191.166412] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:DP-3] disconnected
<7> [191.166596] [drm:status_store] [CONNECTOR:275:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [191.166603] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [191.166610] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [191.166939] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [191.166977] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [191.166982] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [191.167302] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [191.167415] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:275:HDMI-A-1] EDID override reset
<7> [191.167438] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [191.167443] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [191.167749] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [191.167928] [drm:status_store] [CONNECTOR:281:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [191.167934] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2]
<7> [191.167941] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:281:HDMI-A-2]
<7> [191.168279] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2] disconnected
<7> [191.168317] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2]
<7> [191.168323] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:281:HDMI-A-2]
<7> [191.168628] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2] disconnected
<7> [191.168743] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:281:HDMI-A-2] EDID override reset
<7> [191.168765] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2]
<7> [191.168771] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:281:HDMI-A-2]
<7> [191.169087] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2] disconnected
<6> [191.169884] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [191.170042] [drm:status_store] [CONNECTOR:275:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [191.170049] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [191.170074] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [191.170395] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [191.170448] [drm:status_store] [CONNECTOR:281:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [191.170453] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2]
<7> [191.170460] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:281:HDMI-A-2]
<7> [191.170768] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2] disconnected
<7> [191.170818] [drm:status_store] [CONNECTOR:236:eDP-1] force updated from 0 to 0 or reprobing
<7> [191.170824] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1]
<7> [191.170830] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]
<7> [191.172034] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7> [191.173027] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [191.173247] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [191.173458] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [191.173666] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [191.173893] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<7> [191.173900] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [191.173906] [drm] DisplayID checksum invalid, remainder is 248
<7> [191.173910] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [191.173914] [drm] DisplayID checksum invalid, remainder is 248
<7> [191.173918] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [191.173924] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [191.173929] [drm] DisplayID checksum invalid, remainder is 248
<7> [191.173933] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor
<7> [191.173939] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [191.173944] [drm] DisplayID checksum invalid, remainder is 248
<7> [191.173947] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0
<7> [191.173954] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [191.173958] [drm] DisplayID checksum invalid, remainder is 248
<7> [191.173976] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: yes
<7> [191.174202] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [191.175354] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [191.175557] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [191.176564] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [191.176570] [drm] DisplayID checksum invalid, remainder is 248
<7> [191.176573] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [191.176578] [drm] DisplayID checksum invalid, remainder is 248
<7> [191.176581] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [191.176586] [drm] DisplayID checksum invalid, remainder is 248
<7> [191.176625] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes :
<7> [191.176631] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [191.176931] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [191.218486] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0]
<7> [191.218498] [drm:drm_client_modeset_probe]
<7> [191.218559] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1]
<7> [191.218570] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]
<7> [191.219840] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7> [191.220879] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [191.221130] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [191.221358] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [191.221579] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [191.221822] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<7> [191.221831] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [191.221838] [drm] DisplayID checksum invalid, remainder is 248
<7> [191.221841] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [191.221846] [drm] DisplayID checksum invalid, remainder is 248
<7> [191.221850] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [191.221856] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [191.221861] [drm] DisplayID checksum invalid, remainder is 248
<7> [191.221865] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor
<7> [191.221871] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [191.221875] [drm] DisplayID checksum invalid, remainder is 248
<7> [191.221879] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0
<7> [191.221885] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [191.221890] [drm] DisplayID checksum invalid, remainder is 248
<7> [191.221910] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: yes
<7> [191.222144] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [191.223344] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [191.223560] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [191.224577] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [191.224582] [drm] DisplayID checksum invalid, remainder is 248
<7> [191.224586] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [191.224590] [drm] DisplayID checksum invalid, remainder is 248
<7> [191.224594] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [191.224598] [drm] DisplayID checksum invalid, remainder is 248
<7> [191.224644] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes :
<7> [191.224650] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [191.224659] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1]
<7> [191.224666] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1]
<7> [191.224987] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1] disconnected
<7> [191.224994] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:258:DP-2]
<7> [191.225000] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:258:DP-2]
<7> [191.225322] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:258:DP-2] disconnected
<7> [191.225329] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:DP-3]
<7> [191.225335] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:267:DP-3]
<7> [191.225637] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:DP-3] disconnected
<7> [191.225643] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [191.225649] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [191.225969] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [191.225975] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2]
<7> [191.225981] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:281:HDMI-A-2]
<7> [191.226306] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2] disconnected
<7> [191.226312] [drm:drm_client_modeset_probe] connector 236 enabled? yes
<7> [191.226317] [drm:drm_client_modeset_probe] connector 245 enabled? no
<7> [191.226322] [drm:drm_client_modeset_probe] connector 258 enabled? no
<7> [191.226326] [drm:drm_client_modeset_probe] connector 267 enabled? no
<7> [191.226330] [drm:drm_client_modeset_probe] connector 275 enabled? no
<7> [191.226334] [drm:drm_client_modeset_probe] connector 281 enabled? no
<7> [191.226382] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [191.226397] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236
<7> [191.226402] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0
<7> [191.226406] [drm:drm_client_modeset_probe] found mode 2880x1800
<7> [191.226410] [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7> [191.226435] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0)
<6> [191.252636] Console: switching to colour frame buffer device 360x112
Created at 2024-02-11 22:21:45