igt@kms_pm_rpm@basic-pci-d3-state on bat-adln-1@linus-v6.8-rc4 Test details

Detail	Value
Duration	unknown
Igt-Version	IGT-Version: 1.28-g17a41dcf1 (x86_64) (Linux: 6.8.0-rc4-linus-v6.8-rc4-g841c35169323+ x86_64)
Out	Using IGT_SRANDOM=1707683990 for randomisation Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: 0000:00:02.0@ffff88810d04b4b0 has 1/1 users at track_intel_runtime_pm_wakeref.part.0+0x30/0x60 [i915] __intel_display_power_put_async+0x3d/0x160 [i915] intel_atomic_commit_tail+0xaef/0xf80 [i915] intel_atomic_commit+0x321/0x370 [i915] drm_atomic_commit+0x92/0xc0 drm_atomic_helper_set_config+0x77/0xc0 drm_mode_setcrtc+0x1ff/0x710 drm_ioctl_kernel+0xa8/0x100 drm_ioctl+0x223/0x430 __x64_sys_ioctl+0x79/0xb0 do_syscall_64+0x6f/0x140 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Starting subtest: basic-pci-d3-state Subtest basic-pci-d3-state: SUCCESS (4.588s) This test caused an abort condition: Lockdep not active /proc/lockdep_stats contents: lock-classes: 1775 [max: 8192] direct dependencies: 17778 [max: 32768] indirect dependencies: 133830 all direct dependencies: 360804 dependency chains: 26192 [max: 131072] dependency chain hlocks used: 110248 [max: 655360] dependency chain hlocks lost: 0 in-hardirq chains: 266 in-softirq chains: 606 in-process chains: 25320 stack-trace entries: 169393 [max: 1048576] number of stack traces: 8565 number of stack hash chains: 6688 combined max dependencies: 4103749149 hardirq-safe locks: 100 hardirq-unsafe locks: 1062 softirq-safe locks: 212 softirq-unsafe locks: 975 irq-safe locks: 223 irq-unsafe locks: 1062 hardirq-read-safe locks: 3 hardirq-read-unsafe locks: 308 softirq-read-safe locks: 7 softirq-read-unsafe locks: 303 irq-read-safe locks: 7 irq-read-unsafe locks: 308 uncategorized locks: 292 unused locks: 1 max locking depth: 20 max bfs queue depth: 428 max lock class index: 1774 chain lookup misses: 26357 chain lookup hits: 133674784 cyclic checks: 26560 redundant checks: 0 redundant links: 0 find-mask forwards checks: 4474 find-mask backwards checks: 2650 hardirq on events: 74268307 hardirq off events: 74268303 redundant hardirq ons: 60 redundant hardirq offs: 24 softirq on events: 279445 softirq off events: 279445 redundant softirq ons: 0 redundant softirq offs: 0 debug_locks: 0 zapped classes: 1 zapped lock chains: 99 large chain blocks: 1
Err	Starting subtest: basic-pci-d3-state Subtest basic-pci-d3-state: SUCCESS (4.588s)
Dmesg Scroll to first warning	<6> [207.093676] Console: switching to colour dummy device 80x25 <6> [207.094168] [IGT] kms_pm_rpm: executing <7> [207.098613] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [207.106073] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] <7> [207.106087] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1] <7> [207.106328] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected <7> [207.106811] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1] <7> [207.106823] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:203:DP-1] <7> [207.107206] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1] disconnected <7> [207.108012] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2] <7> [207.108023] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:212:DP-2] <7> [207.108338] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2] disconnected <7> [207.109111] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1] <7> [207.109122] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1] <7> [207.110319] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [207.111300] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7> [207.111672] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [207.111952] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [207.112193] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000 <7> [207.112505] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [207.112521] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [207.112531] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor <7> [207.112539] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0 <7> [207.112606] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no <7> [207.112895] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [207.114074] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [207.114330] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [207.115389] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1] probed modes : <7> [207.115401] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa <7> [207.115413] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa <7> [207.115473] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] <7> [207.115483] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1] <7> [207.115861] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected <7> [207.115902] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1] <7> [207.115910] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:203:DP-1] <7> [207.116252] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1] disconnected <7> [207.116271] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2] <7> [207.116275] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:212:DP-2] <7> [207.116511] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2] disconnected <7> [207.116597] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1] <7> [207.116607] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1] <7> [207.117701] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [207.118610] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7> [207.118845] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [207.119081] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [207.119325] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000 <7> [207.119628] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [207.119641] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [207.119648] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor <7> [207.119655] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0 <7> [207.119684] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no <7> [207.119933] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [207.121013] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [207.121244] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [207.122235] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1] probed modes : <7> [207.122245] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa <7> [207.122254] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa <7> [207.122368] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] <7> [207.122374] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1] <7> [207.122590] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected <7> [207.122665] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1] <7> [207.122670] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:203:DP-1] <7> [207.122913] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1] disconnected <7> [207.123016] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2] <7> [207.123023] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:212:DP-2] <7> [207.123337] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2] disconnected <7> [207.123867] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:220] <7> [208.166849] [drm:drm_mode_setcrtc] [CRTC:80:pipe A] <7> [208.167053] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [208.167520] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [208.167932] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [208.168296] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [208.168660] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7843931/8388608 link 522928/524288, found tu 0, data 0/0 link 0/0) <7> [208.169014] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [208.169353] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [208.169708] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3840, found 0) <7> [208.170047] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 4000, found 0) <7> [208.170378] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3840, found 0) <7> [208.170725] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 4000, found 0) <7> [208.171004] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3888, found 0) <7> [208.171148] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3920, found 0) <7> [208.171291] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 2160, found 0) <7> [208.171433] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 2160, found 0) <7> [208.171584] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 2163, found 0) <7> [208.171730] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 2168, found 0) <7> [208.171873] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 2244, found 0) <7> [208.172014] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 2244, found 0) <7> [208.172156] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3840, found 0) <7> [208.172297] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 4000, found 0) <7> [208.172438] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3840, found 0) <7> [208.172588] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 4000, found 0) <7> [208.172732] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3888, found 0) <7> [208.172874] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3920, found 0) <7> [208.173014] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 2160, found 0) <7> [208.173153] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 2160, found 0) <7> [208.173294] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 2163, found 0) <7> [208.173433] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 2168, found 0) <7> [208.173582] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 2244, found 0) <7> [208.173724] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 2244, found 0) <7> [208.173864] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [208.174003] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [208.174143] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [208.174283] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0) <7> [208.174423] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 538600, found 0) <7> [208.174571] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 538600, found 0) <7> [208.174713] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [208.174854] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [208.175001] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:80:pipe A] releasing DPLL 0 <7> [208.175195] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no <7> [208.175340] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [208.175511] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 4027) -> ( 0 - 0), size 4027 -> 0 <7> [208.175664] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb (4027 - 4096) -> ( 0 - 0), size 69 -> 0 <7> [208.175808] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [208.175946] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [208.176079] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [208.176211] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [208.176346] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 0 num active planes 0 <7> [208.176503] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10928 required 0 <7> [208.176668] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15758 required 0 <7> [208.176824] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 16388 required 0 <7> [208.176968] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 17250 required 0 <7> [208.177113] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 0 <7> [208.177255] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 40533 required 0 <7> [208.177403] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 0 <7> [208.177579] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change <7> [208.177729] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 179200 kHz, actual 179200 kHz <7> [208.177873] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [208.178021] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: no [modeset] <7> [208.178173] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no <7> [208.178338] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7> [208.178522] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7> [208.178724] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7> [208.178891] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7> [208.179039] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7> [208.179266] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2 <7> [208.184721] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [208.387878] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:185:eDP-1] set backlight PWM = 0 <7> [208.388815] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [208.401397] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 turn panel power off <7> [208.401583] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000 <7> [208.402108] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 wait for panel power off time <7> [208.402222] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:184:DDI A/PHY A] - short <7> [208.402717] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7> [208.457181] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7> [208.457398] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [208.457890] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:184:DDI A/PHY A] - long <7> [208.458186] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A <7> [208.458490] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [208.458966] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:184:DDI A/PHY A] <7> [208.458974] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:80:pipe A] <7> [208.459656] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:184:DDI A/PHY A] <7> [208.459767] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 <7> [208.460845] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7> [208.461603] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 179200 kHz, VCO 537600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [208.462328] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] aud_ts_cdclk set to M=60, N=448 <7> [208.462924] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:184:DDI A/PHY A] <7> [208.463474] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:193:DDI B/PHY B] <7> [208.463965] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:202:DDI TC1/PHY TC1] <7> [208.464386] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:204:DP-MST A] <7> [208.464837] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:205:DP-MST B] <7> [208.465244] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:206:DP-MST C] <7> [208.465654] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:211:DDI TC2/PHY TC2] <7> [208.466047] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:213:DP-MST A] <7> [208.466424] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:214:DP-MST B] <7> [208.466813] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:215:DP-MST C] <7> [208.467187] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:185:eDP-1] <7> [208.467685] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [208.468146] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [208.468585] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TBT PLL <7> [208.468998] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 1 <7> [208.469393] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 2 <7> [208.469801] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 3 <7> [208.470199] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 4 <7> [208.470689] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7> [208.471172] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [208.471687] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_A <7> [208.472157] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7> [208.473128] [drm:drm_mode_setcrtc] [CRTC:131:pipe B] <7> [208.473590] [drm:drm_mode_setcrtc] [CRTC:182:pipe C] <7> [208.491914] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [208.492482] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [208.493020] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [208.493790] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [208.495456] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [208.498761] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [208.499903] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [208.500925] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [208.501783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [208.502333] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [208.502733] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [208.503205] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [208.577988] [IGT] kms_pm_rpm: starting subtest basic-pci-d3-state <7> [208.588592] [drm:drm_mode_setcrtc] [CRTC:80:pipe A] <7> [208.601451] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [208.601788] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [208.602204] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [208.602652] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [208.603115] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [208.603635] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [208.604067] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [208.605141] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [208.605522] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [208.606033] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [208.610197] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [208.610446] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [208.615403] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [208.616366] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [208.616663] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [208.617140] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [208.617701] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [208.618533] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1] <7> [208.619052] [drm:drm_mode_setcrtc] [CRTC:131:pipe B] <7> [208.619054] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7> [208.619902] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 turning VDD on <7> [208.620284] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [209.068047] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [209.068503] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [209.069022] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [209.069363] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [209.131339] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7> [209.132033] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:184:DDI A/PHY A] - long <7> [209.132613] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [209.133297] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:184:DDI A/PHY A] <7> [209.278275] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [209.280597] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7> [209.281108] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [209.281278] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [209.281396] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000 <7> [209.281671] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [209.281684] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [209.281689] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor <7> [209.281693] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0 <7> [209.281730] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no <7> [209.281866] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [209.282781] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [209.282912] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [209.283640] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1] <7> [209.284129] [drm:drm_mode_setcrtc] [CRTC:182:pipe C] <7> [209.284112] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:203:DP-1] <7> [209.284445] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:212:DP-2] <4> [211.221044] <4> [211.221058] ====================================================== <4> [211.221062] WARNING: possible circular locking dependency detected <4> [211.221065] 6.8.0-rc4-linus-v6.8-rc4-g841c35169323+ #1 Not tainted <4> [211.221070] ------------------------------------------------------ <4> [211.221072] kworker/2:1H/56 is trying to acquire lock: <4> [211.221077] ffff8881072f5978 (&gt->reset.backoff_srcu){++++}-{0:0}, at: _intel_gt_reset_lock+0x35/0x380 [i915] <4> [211.221476] but task is already holding lock: <4> [211.221480] ffffc90000397e58 ((work_completion)(&(&guc->timestamp.work)->work)){+.+.}-{0:0}, at: process_scheduled_works+0x264/0x530 <4> [211.221497] which lock already depends on the new lock. <4> [211.221499] the existing dependency chain (in reverse order) is: <4> [211.221502] -> #3 ((work_completion)(&(&guc->timestamp.work)->work)){+.+.}-{0:0}: <4> [211.221510] lock_acquire+0xd8/0x2d0 <4> [211.221518] __flush_work+0x69/0x420 <4> [211.221524] __cancel_work_timer+0x14f/0x1f0 <4> [211.221530] intel_guc_submission_reset_prepare+0x81/0x4b0 [i915] <4> [211.221965] intel_uc_reset_prepare+0x4a/0xb0 [i915] <4> [211.222381] reset_prepare+0x21/0x60 [i915] <4> [211.222705] intel_gt_reset+0x1cb/0x480 [i915] <4> [211.223009] intel_gt_reset_global+0xeb/0x160 [i915] <4> [211.223291] intel_gt_handle_error+0x372/0x420 [i915] <4> [211.223569] intel_gt_debugfs_reset_store+0x5c/0xc0 [i915] <4> [211.223843] i915_wedged_set+0x1d/0x40 [i915] <4> [211.224091] simple_attr_write_xsigned.constprop.0+0xb4/0x110 <4> [211.224099] full_proxy_write+0x58/0x80 <4> [211.224106] vfs_write+0xcb/0x560 <4> [211.224111] ksys_write+0x64/0xe0 <4> [211.224115] do_syscall_64+0x6f/0x140 <4> [211.224121] entry_SYSCALL_64_after_hwframe+0x6e/0x76 <4> [211.224129] -> #2 (&gt->reset.mutex){+.+.}-{3:3}: <4> [211.224135] lock_acquire+0xd8/0x2d0 <4> [211.224140] i915_gem_shrinker_taints_mutex+0x31/0x50 [i915] <4> [211.224473] intel_gt_init_reset+0x65/0x80 [i915] <4> [211.224755] intel_gt_common_init_early+0xd9/0x120 [i915] <4> [211.225018] intel_root_gt_init_early+0x5e/0x70 [i915] <4> [211.225238] i915_driver_probe+0x1e6/0xd30 [i915] <4> [211.225318] i915_pci_probe+0xd5/0x200 [i915] <4> [211.225399] pci_device_probe+0x95/0x120 <4> [211.225403] really_probe+0x164/0x3c0 <4> [211.225406] __driver_probe_device+0x73/0x160 <4> [211.225408] driver_probe_device+0x19/0xa0 <4> [211.225410] __driver_attach+0xb6/0x180 <4> [211.225412] bus_for_each_dev+0x77/0xd0 <4> [211.225414] bus_add_driver+0x114/0x210 <4> [211.225416] driver_register+0x5b/0x110 <4> [211.225418] 0xffffffffa0333033 <4> [211.225428] do_one_initcall+0x57/0x270 <4> [211.225430] do_init_module+0x5f/0x210 <4> [211.225432] load_module+0x1d1a/0x1f80 <4> [211.225433] init_module_from_file+0x86/0xd0 <4> [211.225435] idempotent_init_module+0x17c/0x230 <4> [211.225436] __x64_sys_finit_module+0x56/0xb0 <4> [211.225438] do_syscall_64+0x6f/0x140 <4> [211.225439] entry_SYSCALL_64_after_hwframe+0x6e/0x76 <4> [211.225441] -> #1 (fs_reclaim){+.+.}-{0:0}: <4> [211.225443] lock_acquire+0xd8/0x2d0 <4> [211.225445] fs_reclaim_acquire+0xa1/0xd0 <4> [211.225449] __alloc_pages+0xeb/0x2e0 <4> [211.225451] pte_alloc_one+0x1d/0x110 <4> [211.225454] __pte_alloc+0x26/0x120 <4> [211.225457] __apply_to_page_range+0x66f/0x740 <4> [211.225459] remap_io_mapping+0x70/0x120 [i915] <4> [211.225545] vm_fault_gtt+0x47e/0xe80 [i915] <4> [211.225656] __do_fault+0x2b/0xf0 <4> [211.225658] do_pte_missing+0x681/0xf40 <4> [211.225659] __handle_mm_fault+0x691/0x800 <4> [211.225660] handle_mm_fault+0xc3/0x240 <4> [211.225662] do_user_addr_fault+0x431/0x9e0 <4> [211.225663] exc_page_fault+0x68/0x1a0 <4> [211.225665] asm_exc_page_fault+0x26/0x30 <4> [211.225667] -> #0 (&gt->reset.backoff_srcu){++++}-{0:0}: <4> [211.225669] check_prev_add+0xe9/0xce0 <4> [211.225671] __lock_acquire+0x17c6/0x2320 <4> [211.225673] lock_acquire+0xd8/0x2d0 <4> [211.225674] _intel_gt_reset_lock+0x50/0x380 [i915] <4> [211.225772] guc_timestamp_ping+0x73/0x130 [i915] <4> [211.225902] process_scheduled_works+0x2db/0x530 <4> [211.225904] worker_thread+0x18c/0x350 <4> [211.225905] kthread+0xfe/0x130 <4> [211.225908] ret_from_fork+0x2c/0x50 <4> [211.225910] ret_from_fork_asm+0x1b/0x30 <4> [211.225912] other info that might help us debug this: <4> [211.225913] Chain exists of: &gt->reset.backoff_srcu --> &gt->reset.mutex --> (work_completion)(&(&guc->timestamp.work)->work) <4> [211.225916] Possible unsafe locking scenario: <4> [211.225916] CPU0 CPU1 <4> [211.225917] ---- ---- <4> [211.225918] lock((work_completion)(&(&guc->timestamp.work)->work)); <4> [211.225919] lock(&gt->reset.mutex); <4> [211.225921] lock((work_completion)(&(&guc->timestamp.work)->work)); <4> [211.225922] lock(&gt->reset.backoff_srcu); <4> [211.225923] DEADLOCK * <4> [211.225924] 2 locks held by kworker/2:1H/56: <4> [211.225925] #0: ffff888100079538 ((wq_completion)events_highpri){+.+.}-{0:0}, at: process_scheduled_works+0x264/0x530 <4> [211.225929] #1: ffffc90000397e58 ((work_completion)(&(&guc->timestamp.work)->work)){+.+.}-{0:0}, at: process_scheduled_works+0x264/0x530 <4> [211.225933] stack backtrace: <4> [211.225934] CPU: 2 PID: 56 Comm: kworker/2:1H Not tainted 6.8.0-rc4-linus-v6.8-rc4-g841c35169323+ #1 <4> [211.225937] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-N LP5 RVP, BIOS ADLNFWI1.R00.3362.A00.2208311605 08/31/2022 <4> [211.225939] Workqueue: events_highpri guc_timestamp_ping [i915] <4> [211.226066] Call Trace: <4> [211.226068] <TASK> <4> [211.226070] dump_stack_lvl+0x64/0xb0 <4> [211.226075] check_noncircular+0x15e/0x180 <4> [211.226078] check_prev_add+0xe9/0xce0 <4> [211.226080] __lock_acquire+0x17c6/0x2320 <4> [211.226082] lock_acquire+0xd8/0x2d0 <4> [211.226084] ? _intel_gt_reset_lock+0x35/0x380 [i915] <4> [211.226185] ? track_intel_runtime_pm_wakeref.part.0+0x30/0x60 [i915] <4> [211.226268] ? guc_timestamp_ping+0x34/0x130 [i915] <4> [211.226393] ? process_scheduled_works+0x2db/0x530 <4> [211.226395] ? worker_thread+0x18c/0x350 <4> [211.226397] ? _intel_gt_reset_lock+0x35/0x380 [i915] <4> [211.226496] _intel_gt_reset_lock+0x50/0x380 [i915] <4> [211.226592] ? _intel_gt_reset_lock+0x35/0x380 [i915] <4> [211.226686] ? _raw_spin_unlock_irqrestore+0x41/0x70 <4> [211.226690] guc_timestamp_ping+0x73/0x130 [i915] <4> [211.226815] ? process_scheduled_works+0x264/0x530 <4> [211.226817] process_scheduled_works+0x2db/0x530 <4> [211.226820] ? __pfx_worker_thread+0x10/0x10 <4> [211.226821] worker_thread+0x18c/0x350 <4> [211.226823] ? __pfx_worker_thread+0x10/0x10 <4> [211.226825] kthread+0xfe/0x130 <4> [211.226827] ? __pfx_kthread+0x10/0x10 <4> [211.226829] ret_from_fork+0x2c/0x50 <4> [211.226830] ? __pfx_kthread+0x10/0x10 <4> [211.226832] ret_from_fork_asm+0x1b/0x30 <4> [211.226835] </TASK> <7> [212.307879] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 turning VDD off <7> [212.308478] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [212.308880] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7> [212.309312] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [212.309742] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [212.310145] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [212.310859] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.310897] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7> [212.311256] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [212.311338] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:184:DDI A/PHY A] - long <7> [212.311734] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [212.312163] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:184:DDI A/PHY A] <7> [212.312340] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [212.313377] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [212.313657] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [212.313921] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [212.314121] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [212.314240] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [212.314385] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [212.395175] [drm:drm_mode_setcrtc] [CRTC:80:pipe A] <7> [212.395272] [drm:drm_mode_setcrtc] [CONNECTOR:185:eDP-1] <7> [212.395458] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:185:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [212.396304] i915 0000:00:02.0: [drm:intel_dp_compute_config_link_bpp_limits [i915]] [ENCODER:184:DDI A/PHY A][CRTC:80:pipe A] DP link limits: pixel clock 538600 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000 <7> [212.396960] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30 <7> [212.397540] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 2019750 available 2160000 <7> [212.398122] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [212.398771] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:184:DDI A/PHY A] [CRTC:80:pipe A] <7> [212.399272] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [212.399831] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [212.400332] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [212.400836] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [212.401300] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [212.401761] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [212.402176] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3840) <7> [212.402575] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 4000) <7> [212.402960] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3840) <7> [212.403321] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 4000) <7> [212.403707] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3888) <7> [212.404080] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3920) <7> [212.404446] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 2160) <7> [212.404809] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 2160) <7> [212.405167] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 2163) <7> [212.405530] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 2168) <7> [212.405916] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 2244) <7> [212.406290] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 2244) <7> [212.406666] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3840) <7> [212.407035] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 4000) <7> [212.407404] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3840) <7> [212.407773] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 4000) <7> [212.408146] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3888) <7> [212.408520] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3920) <7> [212.408908] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 2160) <7> [212.409278] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 2160) <7> [212.409661] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 2163) <7> [212.410024] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 2168) <7> [212.410386] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 2244) <7> [212.410769] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 2244) <7> [212.411139] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [212.411506] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [212.411865] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [212.412227] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30) <7> [212.412613] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [212.412985] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [212.413474] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [212.413862] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [212.414274] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4027), size 0 -> 4027 <7> [212.414624] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb ( 0 - 0) -> (4027 - 4096), size 0 -> 69 <7> [212.414980] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [212.415339] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0 <7> [212.415706] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201 <7> [212.416054] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207 <7> [212.416397] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 2154400 num active planes 1 <7> [212.416789] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10928 required 2263 <7> [212.417182] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15758 required 2263 <7> [212.417574] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 16388 required 2263 <7> [212.417954] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 17250 required 2263 <7> [212.418303] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 2263 <7> [212.418633] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 40533 required 2263 <7> [212.418982] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 2263 <7> [212.419391] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (269300 kHz) > [CRTC:80:pipe A] min cdclk (0 kHz) <7> [212.419798] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (42079 kHz) > old min cdclk (0 kHz) <7> [212.420170] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change <7> [212.420473] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 307200 kHz, actual 307200 kHz <7> [212.420769] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [212.421111] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:80:pipe A] allocated DPLL 0 <7> [212.421504] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:80:pipe A] reserving DPLL 0 <7> [212.421908] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [modeset] <7> [212.422272] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [212.422572] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7> [212.422843] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [212.423117] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [212.423350] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7> [212.423605] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [212.423846] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7843931, data_n: 8388608, link_m: 522928, link_n: 524288, tu: 64 <7> [212.424159] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [212.424499] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: disabled <7> [212.424765] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [212.424981] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, psr2: enabled, panel replay: disabled, selective fetch: enabled <7> [212.425264] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7> [212.425570] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [212.425777] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0 <7> [212.425780] i915 0000:00:02.0: pixelformat: RGB <7> [212.425782] i915 0000:00:02.0: colorimetry: sRGB <7> [212.425783] i915 0000:00:02.0: bpc: 0 <7> [212.425785] i915 0000:00:02.0: dynamic range: VESA range <7> [212.425787] i915 0000:00:02.0: content type: Not defined <7> [212.425790] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7> [212.426068] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa <7> [212.426323] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa <7> [212.426499] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=538600, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2160 vb=2160-2244 vs=2163-2168 vt=2244, flags=0xa <7> [212.426762] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa <7> [212.427103] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=538600, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2160 vb=2160-2244 vs=2163-2168 vt=2244, flags=0xa <7> [212.427427] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3840x2160+0+0, pixel rate 538600 <7> [212.427616] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 60, ips linetime: 0 <7> [212.427805] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [212.428006] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [212.428204] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [212.428359] i915 0000:00:02.0: [drm:icl_dump_hw_state [i915]] dpll_hw_state: cfgcr0: 0xe001a5, cfgcr1: 0x48, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [212.428538] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [212.428694] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [212.428856] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [212.428999] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [212.429221] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [212.429584] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [212.429927] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [212.430145] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [212.430289] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [212.430424] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [212.430564] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [212.430720] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [212.430870] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:220] 3840x2160 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [212.431158] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [212.431465] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3840.000000x2160.000000+0.000000+0.000000 dst: 3840x2160+0+0 <7> [212.431632] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7> [212.431795] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7> [212.431936] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7> [212.432083] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7> [212.432238] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7> [212.444787] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [212.445080] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [212.445518] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [212.445956] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [212.446534] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [212.447191] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [212.447745] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [212.448214] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [212.448541] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [212.448967] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [212.452717] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [212.452935] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [212.455588] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [212.456146] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [212.457503] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.458787] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [212.459106] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [212.459348] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7> [212.459529] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [212.459840] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] aud_ts_cdclk set to M=60, N=768 <7> [212.460008] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:184:DDI A/PHY A] <7> [212.460155] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:193:DDI B/PHY B] <7> [212.460276] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:202:DDI TC1/PHY TC1] <7> [212.460416] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:204:DP-MST A] <7> [212.460585] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:205:DP-MST B] <7> [212.460748] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:206:DP-MST C] <7> [212.460943] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:211:DDI TC2/PHY TC2] <7> [212.461229] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:213:DP-MST A] <7> [212.461458] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:214:DP-MST B] <7> [212.461596] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:215:DP-MST C] <7> [212.461755] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [212.461924] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [212.462079] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TBT PLL <7> [212.462247] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 1 <7> [212.462436] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 2 <7> [212.462633] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 3 <7> [212.462817] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 4 <7> [212.463091] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7> [212.463430] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7> [212.463600] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:80:pipe A] <7> [212.463893] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 <7> [212.464277] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 turn panel power on <7> [212.464489] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [212.915935] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [212.916448] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [212.916919] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 wait for panel power on <7> [212.917372] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7> [212.979142] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7> [212.979843] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:184:DDI A/PHY A] - long <7> [212.980419] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [212.981051] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:184:DDI A/PHY A] <7> [213.129380] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [213.130151] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A <7> [213.131085] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 turning VDD on <7> [213.131849] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7> [213.134810] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 44 41 00 00 01 c0 02 00 02 00 00 0b 80 <7> [213.134866] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Reloading eDP link rates <7> [213.135586] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 06 <7> [213.136415] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [213.136614] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [213.137775] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Clock recovery OK <7> [213.138132] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7> [213.140205] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [213.140600] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [213.141455] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [213.142158] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [213.142599] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [213.143025] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:185:eDP-1] Performing OUI wait (0 ms) <7> [213.144203] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:185:eDP-1] set backlight PWM = 96000 <7> [213.159135] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7> [213.159950] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2 <7> [213.162099] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:185:eDP-1] <7> [213.162929] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7> [213.164592] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [213.165647] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1] <6> [213.167011] [IGT] kms_pm_rpm: finished subtest basic-pci-d3-state, SUCCESS <7> [213.166974] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [213.168081] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7> [213.168419] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [213.168748] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [213.169080] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000 <7> [213.169442] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [213.169460] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [213.169469] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor <7> [213.169477] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0 <7> [213.169512] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no <7> [213.169864] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [213.170984] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [213.171313] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [213.172227] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1] <7> [213.172631] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:203:DP-1] <7> [213.173045] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:212:DP-2] <7> [213.180850] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [213.181428] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [213.194733] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [213.232903] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:220] from all active usage due to RMFB ioctl <7> [213.233016] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:31:plane 1A] because [FB:220] is removed <7> [213.233157] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 4027) -> ( 0 - 0), size 4027 -> 0 <7> [213.233877] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [213.234502] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [213.235120] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [213.235720] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [213.236267] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 0 num active planes 0 <7> [213.236960] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10928 required 0 <7> [213.237521] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15758 required 0 <7> [213.238064] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 16388 required 0 <7> [213.238590] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 17250 required 0 <7> [213.239067] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 0 <7> [213.239505] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 40533 required 0 <7> [213.239944] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 0 <7> [213.240422] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2 <7> [213.263247] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4027), size 0 -> 4027 <7> [213.263951] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,*stwm <7> [213.264452] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0 <7> [213.264948] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201 <7> [213.265419] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207 <7> [213.265901] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 2154400 num active planes 1 <7> [213.266412] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10928 required 2263 <7> [213.266885] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15758 required 2263 <7> [213.267299] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 16388 required 2263 <7> [213.267797] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 17250 required 2263 <7> [213.268211] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 2263 <7> [213.268607] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 40533 required 2263 <7> [213.268986] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 2263 <7> [213.278121] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2 <6> [213.284331] [IGT] kms_pm_rpm: exiting, ret=0 <6> [213.295701] Console: switching to colour frame buffer device 480x135

<7> [207.106073] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]

<7> [207.106087] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]

<7> [207.106328] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected

<7> [207.106811] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1]

<7> [207.106823] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:203:DP-1]

<7> [207.107206] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1] disconnected

<7> [207.108012] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2]

<7> [207.108023] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:212:DP-2]

<7> [207.108338] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2] disconnected

<7> [207.109111] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1]

<7> [207.109122] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1]

<7> [207.110319] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [207.111300] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes

<7> [207.111672] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [207.111952] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [207.112193] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000

<7> [207.112505] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [207.112521] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [207.112531] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor

<7> [207.112539] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0

<7> [207.112606] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no

<7> [207.112895] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [207.114074] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [207.114330] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [207.115389] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1] probed modes :

<7> [207.115401] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa

<7> [207.115413] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa

<7> [207.115473] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]

<7> [207.115483] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]

<7> [207.115861] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected

<7> [207.115902] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1]

<7> [207.115910] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:203:DP-1]

<7> [207.116252] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1] disconnected

<7> [207.116271] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2]

<7> [207.116275] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:212:DP-2]

<7> [207.116511] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2] disconnected

<7> [207.116597] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1]

<7> [207.116607] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1]

<7> [207.117701] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [207.118610] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes

<7> [207.118845] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [207.119081] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [207.119325] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000

<7> [207.119628] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [207.119641] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [207.119648] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor

<7> [207.119655] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0

<7> [207.119684] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no

<7> [207.119933] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [207.121013] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [207.121244] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [207.122235] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1] probed modes :

<7> [207.122245] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa

<7> [207.122254] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa

<7> [207.122368] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]

<7> [207.122374] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]

<7> [207.122590] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected

<7> [207.122665] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1]

<7> [207.122670] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:203:DP-1]

<7> [207.122913] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1] disconnected

<7> [207.123016] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2]

<7> [207.123023] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:212:DP-2]

<7> [207.123337] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2] disconnected

<7> [208.167053] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [208.167520] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [208.167932] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [208.168296] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [208.168660] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7843931/8388608 link 522928/524288, found tu 0, data 0/0 link 0/0)

<7> [208.169014] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [208.169353] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [208.169708] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3840, found 0)

<7> [208.170047] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 4000, found 0)

<7> [208.170378] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3840, found 0)

<7> [208.170725] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 4000, found 0)

<7> [208.171004] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3888, found 0)

<7> [208.171148] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3920, found 0)

<7> [208.171291] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 2160, found 0)

<7> [208.171433] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 2160, found 0)

<7> [208.171584] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 2163, found 0)

<7> [208.171730] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 2168, found 0)

<7> [208.171873] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 2244, found 0)

<7> [208.172014] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 2244, found 0)

<7> [208.172156] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3840, found 0)

<7> [208.172297] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 4000, found 0)

<7> [208.172438] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3840, found 0)

<7> [208.172588] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 4000, found 0)

<7> [208.172732] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3888, found 0)

<7> [208.172874] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3920, found 0)

<7> [208.173014] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 2160, found 0)

<7> [208.173153] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 2160, found 0)

<7> [208.173294] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 2163, found 0)

<7> [208.173433] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 2168, found 0)

<7> [208.173582] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 2244, found 0)

<7> [208.173724] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 2244, found 0)

<7> [208.173864] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [208.174003] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [208.174143] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [208.174283] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)

<7> [208.174423] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 538600, found 0)

<7> [208.174571] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 538600, found 0)

<7> [208.174713] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [208.174854] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [208.175001] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:80:pipe A] releasing DPLL 0

<7> [208.175195] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no

<7> [208.175340] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [208.175511] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 4027) -> ( 0 - 0), size 4027 -> 0

<7> [208.175664] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb (4027 - 4096) -> ( 0 - 0), size 69 -> 0

<7> [208.175808] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [208.175946] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [208.176079] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [208.176211] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [208.176346] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 0 num active planes 0

<7> [208.176503] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10928 required 0

<7> [208.176668] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15758 required 0

<7> [208.176824] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 16388 required 0

<7> [208.176968] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 17250 required 0

<7> [208.177113] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 0

<7> [208.177255] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 40533 required 0

<7> [208.177403] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 0

<7> [208.177579] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change

<7> [208.177729] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 179200 kHz, actual 179200 kHz

<7> [208.177873] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [208.178021] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: no [modeset]

<7> [208.178173] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no

<7> [208.178338] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no

<7> [208.178522] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no

<7> [208.178724] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no

<7> [208.178891] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no

<7> [208.179039] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no

<7> [208.179266] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2

<7> [208.184721] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [208.387878] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:185:eDP-1] set backlight PWM = 0

<7> [208.388815] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [208.401397] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 turn panel power off

<7> [208.401583] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000

<7> [208.402108] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [208.402222] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:184:DDI A/PHY A] - short

<7> [208.402717] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060

<7> [208.457181] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010

<7> [208.457398] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [208.457890] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:184:DDI A/PHY A] - long

<7> [208.458186] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A

<7> [208.458490] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [208.458966] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:184:DDI A/PHY A]

<7> [208.458974] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:80:pipe A]

<7> [208.459656] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:184:DDI A/PHY A]

<7> [208.459767] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0

<7> [208.460845] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A

<7> [208.461603] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 179200 kHz, VCO 537600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [208.462328] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] aud_ts_cdclk set to M=60, N=448

<7> [208.462924] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:184:DDI A/PHY A]

<7> [208.463474] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:193:DDI B/PHY B]

<7> [208.463965] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:202:DDI TC1/PHY TC1]

<7> [208.464386] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:204:DP-MST A]

<7> [208.464837] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:205:DP-MST B]

<7> [208.465244] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:206:DP-MST C]

<7> [208.465654] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:211:DDI TC2/PHY TC2]

<7> [208.466047] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:213:DP-MST A]

<7> [208.466424] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:214:DP-MST B]

<7> [208.466813] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:215:DP-MST C]

<7> [208.467187] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:185:eDP-1]

<7> [208.467685] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [208.468146] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [208.468585] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TBT PLL

<7> [208.468998] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 1

<7> [208.469393] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 2

<7> [208.469801] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 3

<7> [208.470199] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 4

<7> [208.470689] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf

<7> [208.471172] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [208.471687] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_A

<7> [208.472157] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A]

<7> [208.491914] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [208.492482] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [208.493020] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [208.493790] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [208.495456] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [208.498761] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [208.499903] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [208.500925] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [208.501783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [208.502333] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [208.502733] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [208.503205] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [208.577988] [IGT] kms_pm_rpm: starting subtest basic-pci-d3-state

<7> [208.601451] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [208.601788] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [208.602204] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [208.602652] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [208.603115] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [208.603635] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [208.604067] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [208.605141] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [208.605522] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [208.606033] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [208.610197] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [208.610446] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [208.615403] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [208.616366] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [208.616663] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [208.617140] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [208.617701] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [208.618533] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1]

<7> [208.619054] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A

<7> [208.619902] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 turning VDD on

<7> [208.620284] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [209.068047] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [209.068503] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [209.069022] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [209.069363] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [209.131339] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010

<7> [209.132033] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:184:DDI A/PHY A] - long

<7> [209.132613] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [209.133297] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:184:DDI A/PHY A]

<7> [209.278275] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [209.280597] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes

<7> [209.281108] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [209.281278] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [209.281396] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000

<7> [209.281671] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [209.281684] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [209.281689] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor

<7> [209.281693] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0

<7> [209.281730] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no

<7> [209.281866] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [209.282781] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [209.282912] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [209.283640] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]

<7> [209.284112] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:203:DP-1]

<7> [209.284445] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:212:DP-2]

<4> [211.221058] ======================================================

<4> [211.221062] WARNING: possible circular locking dependency detected

<4> [211.221065] 6.8.0-rc4-linus-v6.8-rc4-g841c35169323+ #1 Not tainted

<4> [211.221070] ------------------------------------------------------

<4> [211.221077] ffff8881072f5978 (&gt->reset.backoff_srcu){++++}-{0:0}, at: _intel_gt_reset_lock+0x35/0x380 [i915]

<4> [211.221480] ffffc90000397e58 ((work_completion)(&(&guc->timestamp.work)->work)){+.+.}-{0:0}, at: process_scheduled_works+0x264/0x530

-> #3 ((work_completion)(&(&guc->timestamp.work)->work)){+.+.}-{0:0}:

<4> [211.221530] intel_guc_submission_reset_prepare+0x81/0x4b0 [i915]

&gt->reset.backoff_srcu --> &gt->reset.mutex --> (work_completion)(&(&guc->timestamp.work)->work)

<4> [211.225918] lock((work_completion)(&(&guc->timestamp.work)->work));

<4> [211.225921] lock((work_completion)(&(&guc->timestamp.work)->work));

<4> [211.225925] #0: ffff888100079538 ((wq_completion)events_highpri){+.+.}-{0:0}, at: process_scheduled_works+0x264/0x530

<4> [211.225929] #1: ffffc90000397e58 ((work_completion)(&(&guc->timestamp.work)->work)){+.+.}-{0:0}, at: process_scheduled_works+0x264/0x530

<4> [211.225934] CPU: 2 PID: 56 Comm: kworker/2:1H Not tainted 6.8.0-rc4-linus-v6.8-rc4-g841c35169323+ #1

<4> [211.225937] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-N LP5 RVP, BIOS ADLNFWI1.R00.3362.A00.2208311605 08/31/2022

<4> [211.225939] Workqueue: events_highpri guc_timestamp_ping [i915]

<4> [211.226185] ? track_intel_runtime_pm_wakeref.part.0+0x30/0x60 [i915]

<7> [212.307879] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 turning VDD off

<7> [212.308478] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [212.308880] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A

<7> [212.309312] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [212.309742] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [212.310145] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [212.310859] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.310897] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010

<7> [212.311256] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [212.311338] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:184:DDI A/PHY A] - long

<7> [212.311734] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [212.312163] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:184:DDI A/PHY A]

<7> [212.312340] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [212.313377] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [212.313657] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [212.313921] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [212.314121] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [212.314240] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [212.314385] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [212.395458] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:185:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [212.396304] i915 0000:00:02.0: [drm:intel_dp_compute_config_link_bpp_limits [i915]] [ENCODER:184:DDI A/PHY A][CRTC:80:pipe A] DP link limits: pixel clock 538600 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000

<7> [212.396960] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30

<7> [212.397540] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 2019750 available 2160000

<7> [212.398122] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [212.398771] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:184:DDI A/PHY A] [CRTC:80:pipe A]

<7> [212.399272] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [212.399831] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [212.400332] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [212.400836] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [212.401300] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [212.401761] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [212.402176] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3840)

<7> [212.402575] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 4000)

<7> [212.402960] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3840)

<7> [212.403321] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 4000)

<7> [212.403707] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3888)

<7> [212.404080] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3920)

<7> [212.404446] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 2160)

<7> [212.404809] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 2160)

<7> [212.405167] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 2163)

<7> [212.405530] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 2168)

<7> [212.405916] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 2244)

<7> [212.406290] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 2244)

<7> [212.406666] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3840)

<7> [212.407035] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 4000)

<7> [212.407404] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3840)

<7> [212.407773] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 4000)

<7> [212.408146] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3888)

<7> [212.408520] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3920)

<7> [212.408908] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 2160)

<7> [212.409278] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 2160)

<7> [212.409661] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 2163)

<7> [212.410024] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 2168)

<7> [212.410386] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 2244)

<7> [212.410769] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 2244)

<7> [212.411139] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [212.411506] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [212.411865] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [212.412227] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)

<7> [212.412613] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [212.412985] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [212.413474] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [212.413862] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [212.414274] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4027), size 0 -> 4027

<7> [212.414624] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb ( 0 - 0) -> (4027 - 4096), size 0 -> 69

<7> [212.414980] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [212.415339] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0

<7> [212.415706] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201

<7> [212.416054] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207

<7> [212.416397] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 2154400 num active planes 1

<7> [212.416789] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10928 required 2263

<7> [212.417182] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15758 required 2263

<7> [212.417574] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 16388 required 2263

<7> [212.417954] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 17250 required 2263

<7> [212.418303] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 2263

<7> [212.418633] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 40533 required 2263

<7> [212.418982] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 2263

<7> [212.419391] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (269300 kHz) > [CRTC:80:pipe A] min cdclk (0 kHz)

<7> [212.419798] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (42079 kHz) > old min cdclk (0 kHz)

<7> [212.420170] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change

<7> [212.420473] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 307200 kHz, actual 307200 kHz

<7> [212.420769] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [212.421111] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:80:pipe A] allocated DPLL 0

<7> [212.421504] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:80:pipe A] reserving DPLL 0

<7> [212.421908] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [modeset]

<7> [212.422272] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [212.422572] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0

<7> [212.422843] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [212.423117] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [212.423350] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0

<7> [212.423605] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [212.423846] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7843931, data_n: 8388608, link_m: 522928, link_n: 524288, tu: 64

<7> [212.424159] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [212.424499] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: disabled

<7> [212.424765] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [212.424981] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, psr2: enabled, panel replay: disabled, selective fetch: enabled

<7> [212.425264] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0

<7> [212.425570] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [212.425777] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0

<7> [212.425790] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0

<7> [212.426068] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa

<7> [212.426323] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa

<7> [212.426499] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=538600, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2160 vb=2160-2244 vs=2163-2168 vt=2244, flags=0xa

<7> [212.426762] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa

<7> [212.427103] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=538600, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2160 vb=2160-2244 vs=2163-2168 vt=2244, flags=0xa

<7> [212.427427] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3840x2160+0+0, pixel rate 538600

<7> [212.427616] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 60, ips linetime: 0

<7> [212.427805] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [212.428006] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [212.428204] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [212.428359] i915 0000:00:02.0: [drm:icl_dump_hw_state [i915]] dpll_hw_state: cfgcr0: 0xe001a5, cfgcr1: 0x48, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [212.428538] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [212.428694] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [212.428856] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [212.428999] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [212.429221] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [212.429584] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [212.429927] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [212.430145] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [212.430289] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [212.430424] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [212.430564] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [212.430720] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [212.430870] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:220] 3840x2160 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [212.431158] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [212.431465] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3840.000000x2160.000000+0.000000+0.000000 dst: 3840x2160+0+0

<7> [212.431632] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no

<7> [212.431795] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no

<7> [212.431936] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no

<7> [212.432083] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no

<7> [212.432238] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no

<7> [212.444787] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [212.445080] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [212.445518] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [212.445956] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [212.446534] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [212.447191] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [212.447745] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [212.448214] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [212.448541] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [212.448967] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [212.452717] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [212.452935] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [212.455588] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [212.456146] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [212.457503] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.458787] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [212.459106] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [212.459348] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A

<7> [212.459529] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [212.459840] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] aud_ts_cdclk set to M=60, N=768

<7> [212.460008] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:184:DDI A/PHY A]

<7> [212.460155] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:193:DDI B/PHY B]

<7> [212.460276] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:202:DDI TC1/PHY TC1]

<7> [212.460416] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:204:DP-MST A]

<7> [212.460585] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:205:DP-MST B]

<7> [212.460748] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:206:DP-MST C]

<7> [212.460943] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:211:DDI TC2/PHY TC2]

<7> [212.461229] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:213:DP-MST A]

<7> [212.461458] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:214:DP-MST B]

<7> [212.461596] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:215:DP-MST C]

<7> [212.461755] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [212.461924] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [212.462079] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TBT PLL

<7> [212.462247] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 1

<7> [212.462436] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 2

<7> [212.462633] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 3

<7> [212.462817] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 4

<7> [212.463091] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf

<7> [212.463430] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A

<7> [212.463600] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:80:pipe A]

<7> [212.463893] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0

<7> [212.464277] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 turn panel power on

<7> [212.464489] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [212.915935] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [212.916448] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [212.916919] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 wait for panel power on

<7> [212.917372] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063

<7> [212.979142] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010

<7> [212.979843] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:184:DDI A/PHY A] - long

<7> [212.980419] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [212.981051] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:184:DDI A/PHY A]

<7> [213.129380] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [213.130151] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A

<7> [213.131085] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 turning VDD on

<7> [213.131849] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:184:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b

<7> [213.134810] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 44 41 00 00 01 c0 02 00 02 00 00 0b 80

<7> [213.134866] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Reloading eDP link rates

<7> [213.135586] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 06

<7> [213.136415] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [213.136614] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [213.137775] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Clock recovery OK

<7> [213.138132] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Using DP training pattern TPS3

<7> [213.140205] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [213.140600] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:185:eDP-1][ENCODER:184:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [213.141455] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [213.142158] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [213.142599] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [213.143025] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:185:eDP-1] Performing OUI wait (0 ms)

<7> [213.144203] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:185:eDP-1] set backlight PWM = 96000

<7> [213.159135] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf

<7> [213.159950] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2

<7> [213.162099] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:185:eDP-1]

<7> [213.162929] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A]

<7> [213.164592] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [213.165647] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1]

<6> [213.167011] [IGT] kms_pm_rpm: finished subtest basic-pci-d3-state, SUCCESS

<7> [213.166974] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [213.168081] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes

<7> [213.168419] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [213.168748] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [213.169080] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000

<7> [213.169442] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [213.169460] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [213.169469] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor

<7> [213.169477] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0

<7> [213.169512] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no

<7> [213.169864] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [213.170984] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [213.171313] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [213.172227] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]

<7> [213.172631] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:203:DP-1]

<7> [213.173045] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:212:DP-2]

<7> [213.180850] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [213.181428] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [213.194733] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [213.232903] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:220] from all active usage due to RMFB ioctl

<7> [213.233016] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:31:plane 1A] because [FB:220] is removed

<7> [213.233157] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 4027) -> ( 0 - 0), size 4027 -> 0

<7> [213.233877] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [213.234502] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [213.235120] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [213.235720] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [213.236267] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 0 num active planes 0

<7> [213.236960] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10928 required 0

<7> [213.237521] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15758 required 0

<7> [213.238064] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 16388 required 0

<7> [213.238590] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 17250 required 0

<7> [213.239067] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 0

<7> [213.239505] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 40533 required 0

<7> [213.239944] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 0

<7> [213.240422] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2

<7> [213.263247] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4027), size 0 -> 4027

<7> [213.263951] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [213.264452] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0

<7> [213.264948] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201

<7> [213.265419] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207

<7> [213.265901] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 2154400 num active planes 1

<7> [213.266412] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10928 required 2263

<7> [213.266885] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15758 required 2263

<7> [213.267299] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 16388 required 2263

<7> [213.267797] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 17250 required 2263

<7> [213.268211] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 2263

<7> [213.268607] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 40533 required 2263

<7> [213.268986] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 2263

<7> [213.278121] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2

<6> [213.295701] Console: switching to colour frame buffer device 480x135

Results for igt@kms_pm_rpm@basic-pci-d3-state