Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 1.28-gbf075a74e (x86_64) (Linux: 6.8.0-rc3-linus-v6.8-rc3-g54be6c6c5ae8+ x86_64)
Out 
Using IGT_SRANDOM=1707051562 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.029s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.029s)
Dmesg
<6> [193.966358] Console: switching to colour dummy device 80x25
<6> [193.966808] [IGT] kms_force_connector_basic: executing
<7> [193.981562] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [193.983151] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [193.988405] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [193.990350] [drm:status_store] [CONNECTOR:275:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [193.990363] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [193.990373] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [193.990750] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [193.990785] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [193.990791] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [193.991209] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [193.991395] [drm:status_store] [CONNECTOR:281:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [193.991401] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2]
<7> [193.991408] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:281:HDMI-A-2]
<7> [193.991760] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2] disconnected
<7> [193.991791] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2]
<7> [193.991797] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:281:HDMI-A-2]
<7> [193.992140] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2] disconnected
<7> [193.992169] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [193.992174] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [193.992500] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<6> [193.992929] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [193.993119] [drm:status_store] [CONNECTOR:275:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [193.993125] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [193.993132] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [193.993623] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [193.993837] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [193.994449] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [193.994673] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [193.994687] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [193.994893] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc3. force bit now 1
<7> [194.000965] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [194.000977] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc3. force bit now 0
<7> [194.001199] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] status updated from disconnected to connected
<7> [194.001365] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] probed modes :
<7> [194.001372] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [194.001380] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [194.001387] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [194.001393] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [194.001399] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [194.001444] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [194.001451] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [194.001912] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [194.002128] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [194.002545] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [194.002747] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [194.002759] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [194.002950] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc3. force bit now 1
<7> [194.008843] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [194.008853] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc3. force bit now 0
<7> [194.009124] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] probed modes :
<7> [194.009129] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [194.009136] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [194.009142] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [194.009147] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [194.009153] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [194.009383] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:275:HDMI-A-1] EDID override set
<7> [194.009408] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [194.009413] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [194.009643] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:275:HDMI-A-1] ELD monitor IGT
<7> [194.009649] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:275:HDMI-A-1] ELD size 24, SAD count 0
<7> [194.009886] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [194.010088] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [194.010493] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [194.010689] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [194.010819] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [194.010826] [drm:drm_mode_prune_invalid] Not using 800x600 mode: STALE
<7> [194.010835] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [194.010842] [drm:drm_mode_prune_invalid] Not using 848x480 mode: STALE
<7> [194.010851] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] probed modes :
<7> [194.010856] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [194.010862] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [194.010868] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [194.010873] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [194.010879] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [194.010885] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [194.011055] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:275:HDMI-A-1] EDID override set
<7> [194.011102] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [194.011108] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [194.011347] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:275:HDMI-A-1] ELD monitor IGT
<7> [194.011354] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:275:HDMI-A-1] ELD size 24, SAD count 0
<7> [194.011361] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:275:HDMI-A-1] EDID changed, epoch counter 4
<7> [194.011604] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [194.011802] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [194.012222] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [194.012423] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [194.012539] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [194.012546] [drm:drm_mode_prune_invalid] Not using 1400x1050 mode: STALE
<7> [194.012555] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] probed modes :
<7> [194.012559] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [194.012565] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [194.012570] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [194.012576] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [194.012582] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [194.012722] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:275:HDMI-A-1] EDID override reset
<7> [194.012750] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [194.012755] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [194.013436] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [194.013627] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [194.014026] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc3] NAK for addr: 0050 w(1)
<7> [194.014230] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [194.014239] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [194.014424] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus tc3. force bit now 1
<7> [194.020330] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc3
<7> [194.020340] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus tc3. force bit now 0
<7> [194.020527] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:275:HDMI-A-1] EDID changed, epoch counter 5
<7> [194.020596] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [194.020604] [drm:drm_mode_prune_invalid] Not using 1920x1080 mode: STALE
<7> [194.020612] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [194.020619] [drm:drm_mode_prune_invalid] Not using 1280x720 mode: STALE
<7> [194.020627] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] probed modes :
<7> [194.020632] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [194.020637] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [194.020643] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [194.020649] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [194.020654] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [194.020833] [drm:status_store] [CONNECTOR:275:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [194.020839] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [194.020847] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [194.021201] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] status updated from connected to disconnected
<7> [194.021216] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [194.021272] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [194.021278] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [194.021580] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<6> [194.022078] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [194.022229] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [194.023536] [drm:status_store] [CONNECTOR:236:eDP-1] force updated from 0 to 0 or reprobing
<7> [194.023543] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1]
<7> [194.023551] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]
<7> [194.024765] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7> [194.025784] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [194.026001] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [194.026233] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [194.026448] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [194.026682] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<7> [194.026690] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [194.026696] [drm] DisplayID checksum invalid, remainder is 248
<7> [194.026700] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [194.026705] [drm] DisplayID checksum invalid, remainder is 248
<7> [194.026709] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [194.026715] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [194.026720] [drm] DisplayID checksum invalid, remainder is 248
<7> [194.026723] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor
<7> [194.026729] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [194.026734] [drm] DisplayID checksum invalid, remainder is 248
<7> [194.026737] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0
<7> [194.026744] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [194.026748] [drm] DisplayID checksum invalid, remainder is 248
<7> [194.026768] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: yes
<7> [194.026982] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [194.028183] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [194.028395] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [194.029470] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [194.029475] [drm] DisplayID checksum invalid, remainder is 248
<7> [194.029479] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [194.029484] [drm] DisplayID checksum invalid, remainder is 248
<7> [194.029487] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [194.029492] [drm] DisplayID checksum invalid, remainder is 248
<7> [194.029535] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes :
<7> [194.029540] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [194.029592] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1]
<7> [194.029599] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]
<7> [194.030711] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7> [194.031640] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [194.031840] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [194.032042] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [194.032255] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [194.032480] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<7> [194.032487] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [194.032492] [drm] DisplayID checksum invalid, remainder is 248
<7> [194.032495] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [194.032499] [drm] DisplayID checksum invalid, remainder is 248
<7> [194.032502] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [194.032507] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [194.032511] [drm] DisplayID checksum invalid, remainder is 248
<7> [194.032514] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor
<7> [194.032519] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [194.032523] [drm] DisplayID checksum invalid, remainder is 248
<7> [194.032526] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0
<7> [194.032532] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [194.032536] [drm] DisplayID checksum invalid, remainder is 248
<7> [194.032551] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: yes
<7> [194.032754] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [194.033883] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [194.034094] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [194.035036] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [194.035041] [drm] DisplayID checksum invalid, remainder is 248
<7> [194.035044] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [194.035048] [drm] DisplayID checksum invalid, remainder is 248
<7> [194.035050] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [194.035054] [drm] DisplayID checksum invalid, remainder is 248
<7> [194.035102] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes :
<7> [194.035106] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [194.035239] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:236:eDP-1] EDID override reset
<7> [194.035262] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1]
<7> [194.035268] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]
<7> [194.036345] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7> [194.037270] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [194.037470] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [194.037681] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [194.037892] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [194.038138] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<7> [194.038145] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [194.038149] [drm] DisplayID checksum invalid, remainder is 248
<7> [194.038152] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [194.038157] [drm] DisplayID checksum invalid, remainder is 248
<7> [194.038160] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [194.038166] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [194.038170] [drm] DisplayID checksum invalid, remainder is 248
<7> [194.038173] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor
<7> [194.038179] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [194.038183] [drm] DisplayID checksum invalid, remainder is 248
<7> [194.038186] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0
<7> [194.038192] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [194.038197] [drm] DisplayID checksum invalid, remainder is 248
<7> [194.038212] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: yes
<7> [194.038417] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [194.039551] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [194.039754] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [194.040735] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [194.040740] [drm] DisplayID checksum invalid, remainder is 248
<7> [194.040743] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [194.040747] [drm] DisplayID checksum invalid, remainder is 248
<7> [194.040750] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [194.040754] [drm] DisplayID checksum invalid, remainder is 248
<7> [194.040791] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes :
<7> [194.040796] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [194.040949] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:245:DP-1] EDID override reset
<7> [194.040973] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1]
<7> [194.040979] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1]
<7> [194.041293] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1] disconnected
<7> [194.041440] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:258:DP-2] EDID override reset
<7> [194.041463] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:258:DP-2]
<7> [194.041469] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:258:DP-2]
<7> [194.041773] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:258:DP-2] disconnected
<7> [194.041916] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:267:DP-3] EDID override reset
<7> [194.041938] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:DP-3]
<7> [194.041944] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:267:DP-3]
<7> [194.042274] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:DP-3] disconnected
<7> [194.042467] [drm:status_store] [CONNECTOR:275:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [194.042474] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [194.042482] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [194.042821] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [194.042861] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [194.042867] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [194.043201] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [194.043317] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:275:HDMI-A-1] EDID override reset
<7> [194.043338] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [194.043344] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [194.043639] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [194.043820] [drm:status_store] [CONNECTOR:281:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [194.043826] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2]
<7> [194.043832] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:281:HDMI-A-2]
<7> [194.044160] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2] disconnected
<7> [194.044195] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2]
<7> [194.044201] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:281:HDMI-A-2]
<7> [194.044497] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2] disconnected
<7> [194.044608] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:281:HDMI-A-2] EDID override reset
<7> [194.044629] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2]
<7> [194.044634] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:281:HDMI-A-2]
<7> [194.044935] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2] disconnected
<6> [194.045770] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [194.045925] [drm:status_store] [CONNECTOR:275:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [194.045932] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [194.045939] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [194.046271] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [194.046325] [drm:status_store] [CONNECTOR:281:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [194.046331] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2]
<7> [194.046338] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:281:HDMI-A-2]
<7> [194.046642] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2] disconnected
<7> [194.046692] [drm:status_store] [CONNECTOR:236:eDP-1] force updated from 0 to 0 or reprobing
<7> [194.046698] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1]
<7> [194.046704] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]
<7> [194.047900] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7> [194.048899] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [194.049123] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [194.049331] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [194.049534] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [194.049758] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<7> [194.049765] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [194.049771] [drm] DisplayID checksum invalid, remainder is 248
<7> [194.049775] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [194.049779] [drm] DisplayID checksum invalid, remainder is 248
<7> [194.049783] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [194.049789] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [194.049794] [drm] DisplayID checksum invalid, remainder is 248
<7> [194.049797] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor
<7> [194.049803] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [194.049808] [drm] DisplayID checksum invalid, remainder is 248
<7> [194.049812] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0
<7> [194.049818] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [194.049822] [drm] DisplayID checksum invalid, remainder is 248
<7> [194.049840] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: yes
<7> [194.050040] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [194.051185] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [194.051383] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [194.052391] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [194.052396] [drm] DisplayID checksum invalid, remainder is 248
<7> [194.052399] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [194.052404] [drm] DisplayID checksum invalid, remainder is 248
<7> [194.052407] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [194.052412] [drm] DisplayID checksum invalid, remainder is 248
<7> [194.052452] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes :
<7> [194.052457] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [194.052754] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [194.071135] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0]
<7> [194.071147] [drm:drm_client_modeset_probe]
<7> [194.071205] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1]
<7> [194.071214] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1]
<7> [194.072472] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7> [194.073511] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [194.073743] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [194.073972] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [194.074211] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [194.074455] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<7> [194.074464] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [194.074470] [drm] DisplayID checksum invalid, remainder is 248
<7> [194.074473] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [194.074478] [drm] DisplayID checksum invalid, remainder is 248
<7> [194.074482] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [194.074488] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [194.074493] [drm] DisplayID checksum invalid, remainder is 248
<7> [194.074497] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor
<7> [194.074503] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [194.074507] [drm] DisplayID checksum invalid, remainder is 248
<7> [194.074511] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0
<7> [194.074517] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [194.074521] [drm] DisplayID checksum invalid, remainder is 248
<7> [194.074540] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: yes
<7> [194.074757] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [194.075952] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [194.076178] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [194.077193] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [194.077199] [drm] DisplayID checksum invalid, remainder is 248
<7> [194.077202] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [194.077207] [drm] DisplayID checksum invalid, remainder is 248
<7> [194.077210] [drm:__displayid_iter_next] base revision 0x13, length 121, 0 0
<5> [194.077215] [drm] DisplayID checksum invalid, remainder is 248
<7> [194.077259] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:236:eDP-1] probed modes :
<7> [194.077266] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [194.077274] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1]
<7> [194.077281] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1]
<7> [194.077590] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:245:DP-1] disconnected
<7> [194.077597] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:258:DP-2]
<7> [194.077603] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:258:DP-2]
<7> [194.077908] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:258:DP-2] disconnected
<7> [194.077914] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:DP-3]
<7> [194.077920] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:267:DP-3]
<7> [194.078236] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:267:DP-3] disconnected
<7> [194.078242] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1]
<7> [194.078248] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:275:HDMI-A-1]
<7> [194.078569] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:HDMI-A-1] disconnected
<7> [194.078575] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2]
<7> [194.078581] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:281:HDMI-A-2]
<7> [194.078893] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:281:HDMI-A-2] disconnected
<7> [194.078899] [drm:drm_client_modeset_probe] connector 236 enabled? yes
<7> [194.078904] [drm:drm_client_modeset_probe] connector 245 enabled? no
<7> [194.078909] [drm:drm_client_modeset_probe] connector 258 enabled? no
<7> [194.078913] [drm:drm_client_modeset_probe] connector 267 enabled? no
<7> [194.078917] [drm:drm_client_modeset_probe] connector 275 enabled? no
<7> [194.078920] [drm:drm_client_modeset_probe] connector 281 enabled? no
<7> [194.078969] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [194.078983] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236
<7> [194.078988] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0
<7> [194.078992] [drm:drm_client_modeset_probe] found mode 2880x1800
<7> [194.078996] [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7> [194.079017] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0)
<6> [194.104658] Console: switching to colour frame buffer device 360x112
Created at 2024-02-04 14:26:36