Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 1.28-g814cd9883 (x86_64) (Linux: 6.8.0-rc2-linus-v6.8-rc2-g41bccc98fb79+ x86_64)
Out 
Using IGT_SRANDOM=1706490820 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.027s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.027s)
Dmesg
<6> [119.374084] Console: switching to colour dummy device 80x25
<6> [119.374886] [IGT] kms_force_connector_basic: executing
<7> [119.378769] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [119.379971] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [119.392415] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [119.393481] [drm:status_store] [CONNECTOR:95:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [119.393493] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [119.393503] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [119.394030] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [119.394287] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [119.394635] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [119.394824] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [119.394830] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [119.394988] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [119.398053] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [119.398061] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [119.398298] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [119.398352] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [119.398361] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [119.398860] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [119.399097] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [119.399509] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [119.399697] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [119.399703] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [119.399860] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [119.402825] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [119.402833] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [119.403012] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [119.403193] [drm:status_store] [CONNECTOR:104:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [119.403200] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2]
<7> [119.403227] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]
<7> [119.416560] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B
<7> [119.416569] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0
<7> [119.416805] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [119.416971] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [119.417338] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [119.417614] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [119.417699] i915 0000:00:02.0: [drm:do_detailed_mode] [CONNECTOR:104:HDMI-A-2] reducing hsync_end 2100->2092
<7> [119.418078] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] probed modes :
<7> [119.418087] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [119.418097] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2092 2092 1080 1082 1087 1115 0x40 0x9
<7> [119.418106] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
<7> [119.418114] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
<7> [119.418123] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [119.418131] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
<7> [119.418139] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [119.418147] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9
<7> [119.418155] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [119.418163] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [119.418171] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [119.418180] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [119.418258] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2]
<7> [119.418268] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]
<7> [119.431553] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B
<7> [119.431561] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0
<7> [119.431790] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [119.431958] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [119.432309] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [119.432581] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [119.432659] i915 0000:00:02.0: [drm:do_detailed_mode] [CONNECTOR:104:HDMI-A-2] reducing hsync_end 2100->2092
<7> [119.433014] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] probed modes :
<7> [119.433021] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [119.433030] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2092 2092 1080 1082 1087 1115 0x40 0x9
<7> [119.433038] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
<7> [119.433046] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
<7> [119.433053] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [119.433060] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
<7> [119.433068] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [119.433075] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9
<7> [119.433082] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [119.433090] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [119.433097] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [119.433105] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [119.433402] [drm:status_store] [CONNECTOR:115:HDMI-A-3] force updated from 0 to 0 or reprobing
<7> [119.433409] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3]
<7> [119.433416] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]
<7> [119.433818] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [119.433981] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [119.434348] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [119.434621] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [119.434630] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [119.434869] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [119.437951] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [119.437959] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [119.438140] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] disconnected
<7> [119.438184] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3]
<7> [119.438193] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]
<7> [119.438633] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [119.438876] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [119.439345] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [119.439588] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [119.439594] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [119.439753] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [119.442726] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [119.442734] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [119.442914] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] disconnected
<7> [119.442967] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [119.442973] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [119.443404] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [119.443643] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [119.444075] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [119.444383] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [119.444392] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [119.444566] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [119.447468] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [119.447474] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [119.447632] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected
<6> [119.448017] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [119.448241] [drm:status_store] [CONNECTOR:95:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [119.448247] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [119.448253] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [119.448630] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [119.448773] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [119.449101] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [119.449358] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [119.449373] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [119.449591] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [119.452544] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [119.452553] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [119.452688] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] status updated from disconnected to connected
<7> [119.452762] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] probed modes :
<7> [119.452766] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [119.452771] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [119.452775] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [119.452779] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [119.452783] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [119.452818] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [119.452823] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [119.453179] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [119.453378] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [119.453758] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [119.453975] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [119.453987] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [119.454170] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [119.457169] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [119.457180] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [119.457485] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] probed modes :
<7> [119.457491] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [119.457497] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [119.457503] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [119.457509] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [119.457515] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [119.457747] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:95:HDMI-A-1] EDID override set
<7> [119.457776] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [119.457782] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [119.458008] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:HDMI-A-1] ELD monitor IGT
<7> [119.458015] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:HDMI-A-1] ELD size 24, SAD count 0
<7> [119.458263] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [119.458442] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [119.458804] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [119.459010] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [119.459188] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [119.459208] [drm:drm_mode_prune_invalid] Not using 800x600 mode: STALE
<7> [119.459218] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [119.459225] [drm:drm_mode_prune_invalid] Not using 848x480 mode: STALE
<7> [119.459234] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] probed modes :
<7> [119.459239] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [119.459245] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [119.459251] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [119.459256] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [119.459262] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [119.459267] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [119.459450] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:95:HDMI-A-1] EDID override set
<7> [119.459487] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [119.459493] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [119.459723] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:HDMI-A-1] ELD monitor IGT
<7> [119.459729] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:HDMI-A-1] ELD size 24, SAD count 0
<7> [119.459735] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:95:HDMI-A-1] EDID changed, epoch counter 4
<7> [119.459975] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [119.460151] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [119.460528] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [119.460736] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [119.460901] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [119.460909] [drm:drm_mode_prune_invalid] Not using 1400x1050 mode: STALE
<7> [119.460918] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] probed modes :
<7> [119.460923] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [119.460929] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [119.460935] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [119.460940] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [119.460946] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [119.461100] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:95:HDMI-A-1] EDID override reset
<7> [119.461136] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [119.461142] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [119.461580] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [119.461756] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [119.462118] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [119.462338] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [119.462348] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [119.462525] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [119.465489] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [119.465501] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [119.465677] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:95:HDMI-A-1] EDID changed, epoch counter 5
<7> [119.465794] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [119.465801] [drm:drm_mode_prune_invalid] Not using 1920x1080 mode: STALE
<7> [119.465811] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [119.465817] [drm:drm_mode_prune_invalid] Not using 1280x720 mode: STALE
<7> [119.465826] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] probed modes :
<7> [119.465831] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [119.465837] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [119.465842] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [119.465848] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [119.465853] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [119.466049] [drm:status_store] [CONNECTOR:95:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [119.466056] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [119.466063] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [119.466507] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [119.466684] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [119.467047] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [119.467269] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [119.467275] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [119.467450] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [119.470507] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [119.470514] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [119.470713] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] status updated from connected to disconnected
<7> [119.470734] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [119.470891] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [119.470898] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [119.471341] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [119.471518] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [119.471889] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [119.472092] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [119.472098] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [119.472286] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [119.475275] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [119.475282] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [119.475478] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected
<6> [119.476096] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [119.476263] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [119.477270] [drm:status_store] [CONNECTOR:95:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [119.477278] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [119.477286] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [119.477716] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [119.477895] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [119.478286] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [119.478493] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [119.478499] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [119.478674] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [119.481706] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [119.481712] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [119.481847] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [119.481881] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [119.481886] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [119.482241] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [119.482361] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [119.482659] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [119.482799] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [119.482803] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [119.482921] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [119.485736] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [119.485740] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [119.485871] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [119.485966] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:95:HDMI-A-1] EDID override reset
<7> [119.485984] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [119.485988] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [119.486336] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [119.486456] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [119.486755] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [119.486894] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [119.486898] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [119.487014] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [119.489875] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [119.489879] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [119.490013] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [119.490148] [drm:status_store] [CONNECTOR:104:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [119.490153] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2]
<7> [119.490158] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]
<7> [119.503267] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B
<7> [119.503274] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0
<7> [119.503497] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [119.503626] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [119.503927] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [119.504071] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [119.504117] i915 0000:00:02.0: [drm:do_detailed_mode] [CONNECTOR:104:HDMI-A-2] reducing hsync_end 2100->2092
<7> [119.504331] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] probed modes :
<7> [119.504336] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [119.504341] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2092 2092 1080 1082 1087 1115 0x40 0x9
<7> [119.504345] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
<7> [119.504349] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
<7> [119.504353] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [119.504356] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
<7> [119.504360] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [119.504364] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9
<7> [119.504368] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [119.504371] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [119.504375] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [119.504379] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [119.504416] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2]
<7> [119.504420] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]
<7> [119.517467] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B
<7> [119.517473] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0
<7> [119.517692] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [119.517817] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [119.518116] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [119.518272] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [119.518311] i915 0000:00:02.0: [drm:do_detailed_mode] [CONNECTOR:104:HDMI-A-2] reducing hsync_end 2100->2092
<7> [119.518490] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] probed modes :
<7> [119.518493] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [119.518498] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2092 2092 1080 1082 1087 1115 0x40 0x9
<7> [119.518501] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
<7> [119.518505] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
<7> [119.518508] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [119.518512] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
<7> [119.518515] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [119.518519] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9
<7> [119.518522] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [119.518526] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [119.518529] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [119.518533] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [119.518633] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:104:HDMI-A-2] EDID override reset
<7> [119.518651] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2]
<7> [119.518655] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]
<7> [119.531843] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B
<7> [119.531848] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0
<7> [119.532065] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [119.532190] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [119.532501] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [119.532643] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [119.532680] i915 0000:00:02.0: [drm:do_detailed_mode] [CONNECTOR:104:HDMI-A-2] reducing hsync_end 2100->2092
<7> [119.532857] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] probed modes :
<7> [119.532861] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [119.532865] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2092 2092 1080 1082 1087 1115 0x40 0x9
<7> [119.532869] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
<7> [119.532872] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
<7> [119.532876] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [119.532879] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
<7> [119.532883] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [119.532886] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9
<7> [119.532890] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [119.532893] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [119.532897] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [119.532900] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [119.533006] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:108:DP-1] EDID override reset
<7> [119.533024] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1]
<7> [119.533028] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]
<7> [119.533184] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] disconnected
<7> [119.533337] [drm:status_store] [CONNECTOR:115:HDMI-A-3] force updated from 0 to 0 or reprobing
<7> [119.533343] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3]
<7> [119.533348] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]
<7> [119.533691] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [119.533811] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [119.534109] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [119.534270] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [119.534275] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [119.534393] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [119.537232] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [119.537237] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [119.537372] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] disconnected
<7> [119.537407] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3]
<7> [119.537411] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]
<7> [119.537748] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [119.537868] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [119.538166] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [119.538333] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [119.538337] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [119.538454] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [119.541276] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [119.541280] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [119.541410] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] disconnected
<7> [119.541495] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:115:HDMI-A-3] EDID override reset
<7> [119.541512] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3]
<7> [119.541516] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]
<7> [119.541854] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [119.541973] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [119.542357] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [119.542498] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [119.542501] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [119.542618] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [119.545435] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [119.545440] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [119.545569] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] disconnected
<7> [119.545667] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:119:DP-2] EDID override reset
<7> [119.545684] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2]
<7> [119.545688] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]
<7> [119.546507] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00
<7> [119.547150] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
<7> [119.548094] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09
<7> [119.548106] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes
<7> [119.548256] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
<7> [119.548379] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
<7> [119.548499] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
<5> [119.554448] EDID block 0 is all zeroes
<7> [119.554452] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:
<7> [119.554457] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [119.554459] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [119.554460] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [119.554462] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [119.554464] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [119.554465] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [119.554467] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [119.554469] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [119.554475] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no
<7> [119.554600] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [119.555367] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [119.555490] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no
<7> [119.556171] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] probed modes :
<7> [119.556175] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x48 0xa
<7> [119.556180] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [119.556184] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [119.556187] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [119.556191] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<6> [119.556788] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [119.556896] [drm:status_store] [CONNECTOR:95:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [119.556901] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [119.556906] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [119.557267] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [119.557390] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [119.557689] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [119.557831] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [119.557835] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [119.557952] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [119.560796] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [119.560801] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [119.560940] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [119.560987] [drm:status_store] [CONNECTOR:104:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [119.560991] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2]
<7> [119.560996] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]
<7> [119.574114] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B
<7> [119.574120] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0
<7> [119.574353] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [119.574486] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [119.574787] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [119.574929] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [119.574976] i915 0000:00:02.0: [drm:do_detailed_mode] [CONNECTOR:104:HDMI-A-2] reducing hsync_end 2100->2092
<7> [119.575166] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] probed modes :
<7> [119.575170] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [119.575175] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2092 2092 1080 1082 1087 1115 0x40 0x9
<7> [119.575179] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
<7> [119.575183] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
<7> [119.575186] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [119.575190] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
<7> [119.575208] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [119.575215] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9
<7> [119.575220] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [119.575223] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [119.575227] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [119.575231] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [119.575278] [drm:status_store] [CONNECTOR:115:HDMI-A-3] force updated from 0 to 0 or reprobing
<7> [119.575282] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3]
<7> [119.575287] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]
<7> [119.575629] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [119.575750] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [119.576048] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [119.576191] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [119.576211] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [119.576331] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [119.579161] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [119.579166] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [119.579322] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] disconnected
<7> [119.579511] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [119.594436] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0]
<7> [119.594441] [drm:drm_client_modeset_probe]
<7> [119.594479] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]
<7> [119.594485] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [119.594870] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [119.594994] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [119.595304] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [119.595449] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [119.595454] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [119.595571] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [119.598401] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [119.598406] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [119.598542] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [119.598546] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2]
<7> [119.598551] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]
<7> [119.611869] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B
<7> [119.611875] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0
<7> [119.612096] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [119.612241] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [119.612541] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [119.612687] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [119.612732] i915 0000:00:02.0: [drm:do_detailed_mode] [CONNECTOR:104:HDMI-A-2] reducing hsync_end 2100->2092
<7> [119.612928] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] probed modes :
<7> [119.612932] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [119.612937] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2092 2092 1080 1082 1087 1115 0x40 0x9
<7> [119.612941] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
<7> [119.612944] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
<7> [119.612948] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [119.612952] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
<7> [119.612955] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [119.612959] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9
<7> [119.612963] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [119.612966] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [119.612970] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [119.612973] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [119.612977] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1]
<7> [119.612982] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]
<7> [119.613140] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] disconnected
<7> [119.613145] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3]
<7> [119.613148] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]
<7> [119.613495] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [119.613618] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [119.613919] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [119.614062] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [119.614066] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [119.614183] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [119.617012] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [119.617017] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [119.617151] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] disconnected
<7> [119.617155] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2]
<7> [119.617160] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]
<7> [119.617991] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00
<7> [119.618667] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
<7> [119.619654] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09
<7> [119.619667] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes
<7> [119.619800] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
<7> [119.619922] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
<7> [119.620044] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
<5> [119.626244] EDID block 0 is all zeroes
<7> [119.626247] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:
<7> [119.626252] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [119.626255] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [119.626257] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [119.626259] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [119.626261] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [119.626263] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [119.626265] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [119.626267] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [119.626273] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no
<7> [119.626398] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [119.627179] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [119.627320] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no
<7> [119.628021] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] probed modes :
<7> [119.628026] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x48 0xa
<7> [119.628031] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [119.628035] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [119.628039] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [119.628043] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [119.628047] [drm:drm_client_modeset_probe] connector 95 enabled? no
<7> [119.628050] [drm:drm_client_modeset_probe] connector 104 enabled? yes
<7> [119.628052] [drm:drm_client_modeset_probe] connector 108 enabled? no
<7> [119.628054] [drm:drm_client_modeset_probe] connector 115 enabled? no
<7> [119.628057] [drm:drm_client_modeset_probe] connector 119 enabled? yes
<7> [119.628079] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [119.628087] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 104
<7> [119.628090] [drm:drm_client_modeset_probe] looking for preferred mode on connector 104 0
<7> [119.628092] [drm:drm_client_modeset_probe] found mode 1920x1200
<7> [119.628095] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 119
<7> [119.628097] [drm:drm_client_modeset_probe] looking for preferred mode on connector 119 0
<7> [119.628099] [drm:drm_client_modeset_probe] found mode 640x480
<7> [119.628102] [drm:drm_client_modeset_probe] picking CRTCs for 1920x1200 config
<7> [119.628140] [drm:drm_client_modeset_probe] desired mode 1920x1200 set on crtc 51 (0,0)
<7> [119.628146] [drm:drm_client_modeset_probe] desired mode 640x480 set on crtc 72 (0,0)
<6> [119.661272] Console: switching to colour frame buffer device 80x30
Created at 2024-01-29 02:30:05