igt@i915_selftest@live@hangcheck on fi-skl-guc@linus-v6.8-rc2 Test details

Detail	Value
Duration	44.96 seconds
Igt-Version	IGT-Version: 1.28-g814cd9883 (x86_64) (Linux: 6.8.0-rc2-linus-v6.8-rc2-g41bccc98fb79+ x86_64)
Out	Starting dynamic subtest: hangcheck Stack trace: #0 ../../../usr/src/igt-gpu-tools/lib/igt_core.c:1989 __igt_fail_assert() #1 ../../../usr/src/igt-gpu-tools/lib/igt_kmod.c:1483 igt_kselftest_execute() #2 [<unknown>+0x8995e2ce] Dynamic subtest hangcheck: FAIL (44.958s)
Err	Starting dynamic subtest: hangcheck (i915_selftest:5580) igt_kmod-WARNING: Setting dangerous option enable_guc - tainting kernel (i915_selftest:5580) igt_kmod-WARNING: Setting dangerous option live_selftests - tainting kernel (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] VT-d active for gfx access (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: vgaarb: deactivate vga console (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] Using Transparent Hugepages (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = c7f00047 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xc2a48018 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 206 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 4 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 8 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] Disabling framebuffer compression (FBC) to prevent screen flicker with VT-d enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:103:DDI C/PHY C] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:103:DDI C/PHY C] Using DDC pin 0x4 (VBT) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:107:DDI D/PHY D] Using AUX CH D (VBT) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:107:DDI D/PHY D] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX D/DDI D/PHY D: Too many retries, giving up. First error: -110 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX D/DDI D/PHY D: Too many retries, giving up. First error: -110 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:107:DDI D/PHY D] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:107:DDI D/PHY D] Using DDC pin 0x6 (VBT) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:118:DDI E/PHY E] Using AUX CH A (VBT) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:118:DDI E/PHY E] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:103:DDI C/PHY C] hw state readout: disabled, pipe A (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:107:DDI D/PHY D] hw state readout: disabled, pipe A (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST A] hw state readout: disabled, pipe A (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST B] hw state readout: disabled, pipe B (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:111:DP-MST C] hw state readout: disabled, pipe C (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DDI E/PHY E] hw state readout: disabled, pipe A (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:104:HDMI-A-2] hw state readout: disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:108:DP-1] hw state readout: disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:115:HDMI-A-3] hw state readout: disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:119:DP-2] hw state readout: disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [160K, 864K) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 6 GT workarounds on global (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 6 ext-regs. (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xd804f (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x9b2 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x19120006 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 5ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:i915_gem_open [i915]] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:104:HDMI-A-2] generating connector hotplug event (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX D/DDI D/PHY D bus for card0-DP-1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:108:DP-1] generating connector hotplug event (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:115:HDMI-A-3] generating connector hotplug event (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-2 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:119:DP-2] generating connector hotplug event (i915_selftest:5580) igt_kmod-WARNING: [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected (i915_selftest:5580) igt_kmod-WARNING: ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) (i915_selftest:5580) igt_kmod-WARNING: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input88 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) (i915_selftest:5580) igt_kmod-WARNING: i915 display info: display version: 9 (i915_selftest:5580) igt_kmod-WARNING: i915 display info: cursor_needs_physical: no (i915_selftest:5580) igt_kmod-WARNING: i915 display info: has_cdclk_crawl: no (i915_selftest:5580) igt_kmod-WARNING: i915 display info: has_cdclk_squash: no (i915_selftest:5580) igt_kmod-WARNING: i915 display info: has_ddi: yes (i915_selftest:5580) igt_kmod-WARNING: i915 display info: has_dp_mst: yes (i915_selftest:5580) igt_kmod-WARNING: i915 display info: has_dsb: no (i915_selftest:5580) igt_kmod-WARNING: i915 display info: has_fpga_dbg: yes (i915_selftest:5580) igt_kmod-WARNING: i915 display info: has_gmch: no (i915_selftest:5580) igt_kmod-WARNING: i915 display info: has_hotplug: yes (i915_selftest:5580) igt_kmod-WARNING: i915 display info: has_hti: no (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_client_modeset_probe] (i915_selftest:5580) igt_kmod-WARNING: i915 display info: has_ipc: yes (i915_selftest:5580) igt_kmod-WARNING: i915 display info: has_overlay: no (i915_selftest:5580) igt_kmod-WARNING: i915 display info: has_psr: yes (i915_selftest:5580) igt_kmod-WARNING: i915 display info: has_psr_hw_tracking: yes (i915_selftest:5580) igt_kmod-WARNING: i915 display info: overlay_needs_physical: no (i915_selftest:5580) igt_kmod-WARNING: i915 display info: supports_tv: no (i915_selftest:5580) igt_kmod-WARNING: i915 display info: has_hdcp: yes (i915_selftest:5580) igt_kmod-WARNING: i915 display info: has_dmc: yes (i915_selftest:5580) igt_kmod-WARNING: i915 display info: has_dsc: no (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] status updated from unknown to disconnected (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] disconnected (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] status updated from unknown to disconnected (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] disconnected (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] status updated from unknown to disconnected (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] disconnected (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] status updated from unknown to disconnected (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] disconnected (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_client_modeset_probe] No connectors reported connected with modes (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_client_modeset_probe] connector 95 enabled? no (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_client_modeset_probe] connector 104 enabled? no (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_client_modeset_probe] connector 108 enabled? no (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_client_modeset_probe] connector 115 enabled? no (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_client_modeset_probe] connector 119 enabled? no (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] Cannot find any crtc or sizes (i915_selftest:5580) igt_kmod-WARNING: [drm:intel_dsm_detect [i915]] no _DSM method for intel device (i915_selftest:5580) igt_kmod-WARNING: i915 device info: pciid=0x1912 rev=0x06 platform=SKYLAKE (subplatform=0x0) gen=9 (i915_selftest:5580) igt_kmod-WARNING: i915 device info: graphics version: 9 (i915_selftest:5580) igt_kmod-WARNING: i915 device info: media version: 9 (i915_selftest:5580) igt_kmod-WARNING: i915 device info: graphics stepping: G0 (i915_selftest:5580) igt_kmod-WARNING: i915 device info: media stepping: G0 (i915_selftest:5580) igt_kmod-WARNING: i915 device info: display stepping: G0 (i915_selftest:5580) igt_kmod-WARNING: i915 device info: base die stepping: ** (i915_selftest:5580) igt_kmod-WARNING: i915 device info: gt: 2 (i915_selftest:5580) igt_kmod-WARNING: i915 device info: memory-regions: 0x21 (i915_selftest:5580) igt_kmod-WARNING: i915 device info: page-sizes: 0x11000 (i915_selftest:5580) igt_kmod-WARNING: i915 device info: platform: SKYLAKE (i915_selftest:5580) igt_kmod-WARNING: i915 device info: ppgtt-size: 48 (i915_selftest:5580) igt_kmod-WARNING: i915 device info: ppgtt-type: 2 (i915_selftest:5580) igt_kmod-WARNING: i915 device info: dma_mask_size: 39 (i915_selftest:5580) igt_kmod-WARNING: i915 device info: is_mobile: no (i915_selftest:5580) igt_kmod-WARNING: i915 device info: is_lp: no (i915_selftest:5580) igt_kmod-WARNING: i915 device info: require_force_probe: no (i915_selftest:5580) igt_kmod-WARNING: i915 device info: is_dgfx: no (i915_selftest:5580) igt_kmod-WARNING: i915 device info: has_64bit_reloc: yes (i915_selftest:5580) igt_kmod-WARNING: i915 device info: has_64k_pages: no (i915_selftest:5580) igt_kmod-WARNING: i915 device info: gpu_reset_clobbers_display: no (i915_selftest:5580) igt_kmod-WARNING: i915 device info: has_reset_engine: yes (i915_selftest:5580) igt_kmod-WARNING: i915 device info: has_3d_pipeline: yes (i915_selftest:5580) igt_kmod-WARNING: i915 device info: has_flat_ccs: no (i915_selftest:5580) igt_kmod-WARNING: i915 device info: has_global_mocs: no (i915_selftest:5580) igt_kmod-WARNING: i915 device info: has_gmd_id: no (i915_selftest:5580) igt_kmod-WARNING: i915 device info: has_gt_uc: yes (i915_selftest:5580) igt_kmod-WARNING: i915 device info: has_heci_pxp: no (i915_selftest:5580) igt_kmod-WARNING: i915 device info: has_heci_gscfi: no (i915_selftest:5580) igt_kmod-WARNING: i915 device info: has_guc_deprivilege: no (i915_selftest:5580) igt_kmod-WARNING: i915 device info: has_guc_tlb_invalidation: no (i915_selftest:5580) igt_kmod-WARNING: i915 device info: has_l3_ccs_read: no (i915_selftest:5580) igt_kmod-WARNING: i915 device info: has_l3_dpf: no (i915_selftest:5580) igt_kmod-WARNING: i915 device info: has_llc: yes (i915_selftest:5580) igt_kmod-WARNING: i915 device info: has_logical_ring_contexts: yes (i915_selftest:5580) igt_kmod-WARNING: i915 device info: has_logical_ring_elsq: no (i915_selftest:5580) igt_kmod-WARNING: i915 device info: has_media_ratio_mode: no (i915_selftest:5580) igt_kmod-WARNING: i915 device info: has_mslice_steering: no (i915_selftest:5580) igt_kmod-WARNING: i915 device info: has_oa_bpc_reporting: no (i915_selftest:5580) igt_kmod-WARNING: i915 device info: has_oa_slice_contrib_limits: no (i915_selftest:5580) igt_kmod-WARNING: i915 device info: has_oam: no (i915_selftest:5580) igt_kmod-WARNING: i915 device info: has_one_eu_per_fuse_bit: no (i915_selftest:5580) igt_kmod-WARNING: i915 device info: has_pxp: no (i915_selftest:5580) igt_kmod-WARNING: i915 device info: has_rc6: yes (i915_selftest:5580) igt_kmod-WARNING: i915 device info: has_rc6p: no (i915_selftest:5580) igt_kmod-WARNING: i915 device info: has_rps: yes (i915_selftest:5580) igt_kmod-WARNING: i915 device info: has_runtime_pm: yes (i915_selftest:5580) igt_kmod-WARNING: i915 device info: has_snoop: no (i915_selftest:5580) igt_kmod-WARNING: i915 device info: has_coherent_ggtt: yes (i915_selftest:5580) igt_kmod-WARNING: i915 device info: tuning_thread_rr_after_dep: no (i915_selftest:5580) igt_kmod-WARNING: i915 device info: unfenced_needs_alignment: no (i915_selftest:5580) igt_kmod-WARNING: i915 device info: hws_needs_physical: no (i915_selftest:5580) igt_kmod-WARNING: i915 device info: has_pooled_eu: no (i915_selftest:5580) igt_kmod-WARNING: i915 device info: rawclk rate: 24000 kHz (i915_selftest:5580) igt_kmod-WARNING: i915 device info: iommu: enabled (i915_selftest:5580) igt_kmod-WARNING: i915 device info: available engines: 40403 (i915_selftest:5580) igt_kmod-WARNING: i915 device info: slice total: 1, mask=0001 (i915_selftest:5580) igt_kmod-WARNING: i915 device info: subslice total: 3 (i915_selftest:5580) igt_kmod-WARNING: i915 device info: slice0: 3 subslices, mask=00000007 (i915_selftest:5580) igt_kmod-WARNING: i915 device info: slice1: 0 subslices, mask=00000000 (i915_selftest:5580) igt_kmod-WARNING: i915 device info: slice2: 0 subslices, mask=00000000 (i915_selftest:5580) igt_kmod-WARNING: i915 device info: EU total: 24 (i915_selftest:5580) igt_kmod-WARNING: i915 device info: EU per subslice: 8 (i915_selftest:5580) igt_kmod-WARNING: i915 device info: has slice power gating: no (i915_selftest:5580) igt_kmod-WARNING: i915 device info: has subslice power gating: no (i915_selftest:5580) igt_kmod-WARNING: i915 device info: has EU power gating: yes (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled (i915_selftest:5580) igt_kmod-WARNING: i915: Performing live selftests with st_random_seed=0xc1addfd8 st_timeout=500 (i915_selftest:5580) igt_kmod-WARNING: i915: Running hangcheck (i915_selftest:5580) igt_kmod-WARNING: i915: Running intel_hangcheck_live_selftests/igt_hang_sanitycheck (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_client_modeset_probe] (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] disconnected (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] disconnected (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] disconnected (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] disconnected (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_client_modeset_probe] No connectors reported connected with modes (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_client_modeset_probe] connector 95 enabled? no (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_client_modeset_probe] connector 104 enabled? no (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_client_modeset_probe] connector 108 enabled? no (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_client_modeset_probe] connector 115 enabled? no (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_client_modeset_probe] connector 119 enabled? no (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration (i915_selftest:5580) igt_kmod-WARNING: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] Cannot find any crtc or sizes (i915_selftest:5580) igt_kmod-WARNING: i915: Running intel_hangcheck_live_selftests/igt_reset_nop (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1100MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1117MHz, before = 1117MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1050MHz, before = 1117MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1117MHz, before = 1117MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: igt_reset_nop: 66 resets (i915_selftest:5580) igt_kmod-WARNING: i915: Running intel_hangcheck_live_selftests/igt_reset_nop_engine (i915_selftest:5580) igt_kmod-WARNING: igt_reset_nop_engine(rcs0): 764 resets (i915_selftest:5580) igt_kmod-WARNING: igt_reset_nop_engine(bcs0): 870 resets (i915_selftest:5580) igt_kmod-WARNING: igt_reset_nop_engine(vcs0): 880 resets (i915_selftest:5580) igt_kmod-WARNING: igt_reset_nop_engine(vecs0): 885 resets (i915_selftest:5580) igt_kmod-WARNING: i915: Running intel_hangcheck_live_selftests/igt_reset_idle_engine (i915_selftest:5580) igt_kmod-WARNING: rcs0: Completed 4030 idle resets (i915_selftest:5580) igt_kmod-WARNING: bcs0: Completed 5559 idle resets (i915_selftest:5580) igt_kmod-WARNING: vcs0: Completed 5495 idle resets (i915_selftest:5580) igt_kmod-WARNING: vecs0: Completed 5632 idle resets (i915_selftest:5580) igt_kmod-WARNING: i915: Running intel_hangcheck_live_selftests/igt_reset_active_engine (i915_selftest:5580) igt_kmod-WARNING: rcs0: Completed 902 active resets (i915_selftest:5580) igt_kmod-WARNING: bcs0: Completed 1118 active resets (i915_selftest:5580) igt_kmod-WARNING: vcs0: Completed 1091 active resets (i915_selftest:5580) igt_kmod-WARNING: vecs0: Completed 1033 active resets (i915_selftest:5580) igt_kmod-WARNING: i915: Running intel_hangcheck_live_selftests/igt_reset_fail_engine (i915_selftest:5580) igt_kmod-WARNING: igt_reset_fail_engine(rcs0): 1453 resets (i915_selftest:5580) igt_kmod-WARNING: igt_reset_fail_engine(bcs0): 1736 resets (i915_selftest:5580) igt_kmod-WARNING: igt_reset_fail_engine(vcs0): 1754 resets (i915_selftest:5580) igt_kmod-WARNING: igt_reset_fail_engine(vecs0): 1545 resets (i915_selftest:5580) igt_kmod-WARNING: i915: Running intel_hangcheck_live_selftests/igt_reset_engines (i915_selftest:5580) igt_kmod-WARNING: i915_reset_engine(rcs0:idle): 1962 resets (i915_selftest:5580) igt_kmod-WARNING: i915_reset_engine(bcs0:idle): 2746 resets (i915_selftest:5580) igt_kmod-WARNING: i915_reset_engine(vcs0:idle): 3105 resets (i915_selftest:5580) igt_kmod-WARNING: i915_reset_engine(vecs0:idle): 2965 resets (i915_selftest:5580) igt_kmod-WARNING: i915_reset_engine(rcs0:active): 811 resets (i915_selftest:5580) igt_kmod-WARNING: i915_reset_engine(bcs0:active): 955 resets (i915_selftest:5580) igt_kmod-WARNING: i915_reset_engine(vcs0:active): 958 resets (i915_selftest:5580) igt_kmod-WARNING: i915_reset_engine(vecs0:active): 966 resets (i915_selftest:5580) igt_kmod-WARNING: i915_reset_engine(rcs0:others-idle): 4395 resets (i915_selftest:5580) igt_kmod-WARNING: i915_reset_engine(bcs0:others-idle): 5217 resets (i915_selftest:5580) igt_kmod-WARNING: i915_reset_engine(vcs0:others-idle): 5281 resets (i915_selftest:5580) igt_kmod-WARNING: i915_reset_engine(vecs0:others-idle): 5490 resets (i915_selftest:5580) igt_kmod-WARNING: i915_reset_engine(rcs0:others-active): 627 resets (i915_selftest:5580) igt_kmod-WARNING: i915_reset_engine(bcs0:others-active): 689 resets (i915_selftest:5580) igt_kmod-WARNING: i915_reset_engine(vcs0:others-active): 808 resets (i915_selftest:5580) igt_kmod-WARNING: i915_reset_engine(vecs0:others-active): 745 resets (i915_selftest:5580) igt_kmod-WARNING: i915_reset_engine(rcs0:others-priority): 667 resets (i915_selftest:5580) igt_kmod-WARNING: i915_reset_engine(bcs0:others-priority): 620 resets (i915_selftest:5580) igt_kmod-WARNING: i915_reset_engine(vcs0:others-priority): 692 resets (i915_selftest:5580) igt_kmod-WARNING: i915_reset_engine(vecs0:others-priority): 789 resets (i915_selftest:5580) igt_kmod-WARNING: i915_reset_engine(rcs0:self-priority): 847 resets (i915_selftest:5580) igt_kmod-WARNING: i915_reset_engine(bcs0:self-priority): 909 resets (i915_selftest:5580) igt_kmod-WARNING: i915_reset_engine(vcs0:self-priority): 851 resets (i915_selftest:5580) igt_kmod-WARNING: i915_reset_engine(vecs0:self-priority): 890 resets (i915_selftest:5580) igt_kmod-WARNING: i915: Running intel_hangcheck_live_selftests/igt_reset_engines_atomic (i915_selftest:5580) igt_kmod-WARNING: intel_gt_set_wedged called from igt_force_reset+0xd/0xd0 [i915] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: intel_gt_set_wedged called from igt_force_reset+0xd/0xd0 [i915] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915: Running intel_hangcheck_live_selftests/igt_reset_queue (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1117MHz, before = 1117MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1017MHz, before = 1017MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1100MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1083MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1100MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1083MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1100MHz, before = 1100MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1117MHz, before = 1117MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1017MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1117MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1083MHz, before = 1083MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 883MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 617MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1117MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 950MHz, before = 1083MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 883MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 617MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1117MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1117MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1117MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1083MHz, before = 1083MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 750MHz, before = 1017MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 617MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 5ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1117MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1083MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1017MHz, before = 1017MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1117MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1083MHz, before = 1083MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1083MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 0, freq = 350MHz, status = 0x00000020 [0x10/00] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 1, freq = 350MHz, status = 0x00000020 [0x10/00] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 2, freq = 350MHz, status = 0x00000020 [0x10/00] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 3, freq = 350MHz, status = 0x00000020 [0x10/00] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 4, freq = 350MHz, status = 0x00000020 [0x10/00] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 5, freq = 350MHz, status = 0x00000020 [0x10/00] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 6, freq = 350MHz, status = 0x00000020 [0x10/00] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 7, freq = 350MHz, status = 0x00000020 [0x10/00] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 8, freq = 350MHz, status = 0x00000020 [0x10/00] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 9, freq = 350MHz, status = 0x00000020 [0x10/00] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 10, freq = 350MHz, status = 0x00000020 [0x10/00] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 11, freq = 350MHz, status = 0x00000020 [0x10/00] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 12, freq = 350MHz, status = 0x00000020 [0x10/00] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 13, freq = 350MHz, status = 0x00000020 [0x10/00] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 14, freq = 350MHz, status = 0x00000020 [0x10/00] (i915_selftest:5580) igt_kmod-WARNING: heartbeat rcs0 heartbeat {seqno:f6dd:2237, prio:2147483646} not ticking (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09Awake? 5 (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09Barriers?: no (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09Latency: 54us (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09Runtime: 5818ms (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09Forcewake: 0 domains, 0 active (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09Heartbeat: 3008 ms ago (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09Reset count: 16462 (global 135) (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09Properties: (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09\x09heartbeat_interval_ms: 2500 [default 2500] (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09\x09max_busywait_duration_ns: 8000 [default 8000] (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09\x09preempt_timeout_ms: 640 [default 640] (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09\x09stop_timeout_ms: 100 [default 100] (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09\x09timeslice_duration_ms: 1 [default 1] (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09Requests: (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09On hold?: 0 (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09MMIO base: 0x00002000 (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09EL_STAT_HI: 0x00000000 (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09EL_STAT_LO: 0x00000001 (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09RING_START: 0x00000000 (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09RING_HEAD: 0x00000000 (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09RING_TAIL: 0x00000000 (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09RING_CTL: 0x00000000 (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09RING_MODE: 0x00000200 [idle] (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09RING_IMR: 0xffffffff (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09RING_ESR: 0x00000000 (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09RING_EMR: 0xffffffff (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09RING_EIR: 0x00000000 (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09ACTHD: 0x00000000_00000000 (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09BBADDR: 0x00000000_00000000 (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09DMA_FADDR: 0x00000000_00000000 (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09IPEIR: 0x00000000 (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09IPEHR: 0x00000000 (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09Execlist tasklet queued? yes (disabled), preempt? inactive, timeslice? inactive (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09Execlist status: 0x00000001 00000000; CSB read:5, write:5, entries:6 (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09\x09Queue priority hint: -1024 (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09\x09R f6dd:2237* prio=2147483646 @ 3008ms: [i915] (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09\x09R f95a:134* prio=0 @ 15261ms: (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09\x09R f95a:136 prio=0 @ 15258ms: (i915_selftest:5580) igt_kmod-WARNING: heartbeat HWSP: (i915_selftest:5580) igt_kmod-WARNING: heartbeat [0000] 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a (i915_selftest:5580) igt_kmod-WARNING: heartbeat * (i915_selftest:5580) igt_kmod-WARNING: heartbeat [0040] ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff (i915_selftest:5580) igt_kmod-WARNING: heartbeat [0060] ffffffff ffffffff ffffffff ffffffff 5a5a5a5a 5a5a5a5a 5a5a5a5a 00000005 (i915_selftest:5580) igt_kmod-WARNING: heartbeat [0080] 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a (i915_selftest:5580) igt_kmod-WARNING: heartbeat * (i915_selftest:5580) igt_kmod-WARNING: heartbeat [00c0] 5a5a5a5a 5a5a5a5a 00000000 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a (i915_selftest:5580) igt_kmod-WARNING: heartbeat [00e0] 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a (i915_selftest:5580) igt_kmod-WARNING: heartbeat [0100] 000008bc 00000000 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a (i915_selftest:5580) igt_kmod-WARNING: heartbeat [0120] 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a (i915_selftest:5580) igt_kmod-WARNING: heartbeat * (i915_selftest:5580) igt_kmod-WARNING: heartbeat Idle? no (i915_selftest:5580) igt_kmod-WARNING: heartbeat IRQ: disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GPU HANG: ecode 9:0:00000000 (i915_selftest:5580) igt_kmod-WARNING: GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace. (i915_selftest:5580) igt_kmod-WARNING: Please file a _new_ bug report at https://gitlab.freedesktop.org/drm/intel/issues/new. (i915_selftest:5580) igt_kmod-WARNING: Please see https://drm.pages.freedesktop.org/intel-docs/how-to-file-i915-bugs.html for details. (i915_selftest:5580) igt_kmod-WARNING: drm/i915 developers can then reassign to the right component if it's not a kernel issue. (i915_selftest:5580) igt_kmod-WARNING: The GPU crash dump is required to analyze GPU hangs, so please always attach it. (i915_selftest:5580) igt_kmod-WARNING: GPU crash dump saved to /sys/class/drm/card0/error (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 15, freq = 350MHz, status = 0x00000020 [0x10/00] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 16, freq = 350MHz, status = 0x00000020 [0x10/00] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 17, freq = 350MHz, status = 0x00000020 [0x10/00] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 18, freq = 350MHz, status = 0x00000020 [0x10/00] (i915_selftest:5580) igt_kmod-WARNING: Fence expiration time out i915-0000:00:02.0::86! (i915_selftest:5580) igt_kmod-WARNING: Fence expiration time out i915-0000:00:02.0::88! (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 19, freq = 350MHz, status = 0x00000020 [0x10/00] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: load failed: status = 0x00000020, time = 20043ms, freq = 350MHz, ret = -110 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: load failed: status: Reset = 0, BootROM = 0x10, UKernel = 0x00, MIA = 0x00, Auth = 0x00 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:__uc_init_hw [i915]] GT0: GuC fw load failed (-ETIMEDOUT) will reset and retry 2 more time(s) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: Fence error status not zero [-4] after unrelated reset (i915_selftest:5580) igt_kmod-WARNING: i915/intel_hangcheck_live_selftests: igt_reset_queue failed with error -22 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D (i915_selftest:5580) igt_kmod-WARNING: intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper (i915_selftest:5580) igt_kmod-WARNING: i915: probe of 0000:00:02.0 failed with error -22 (i915_selftest:5580) igt_kmod-CRITICAL: Test assertion failure function igt_kselftest_execute, file ../../../usr/src/igt-gpu-tools/lib/igt_kmod.c:1476: (i915_selftest:5580) igt_kmod-CRITICAL: Failed assertion: err == 0 (i915_selftest:5580) igt_kmod-CRITICAL: kselftest "i915 igt__46__live_hangcheck=1 live_selftests=-1 disable_display=1 st_filter=" failed: Invalid argument [22] Dynamic subtest hangcheck failed. ** DEBUG ** (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1117MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1117MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1117MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1083MHz, before = 1083MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 750MHz, before = 1017MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 617MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 5ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1117MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1083MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1017MHz, before = 1017MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1117MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1083MHz, before = 1083MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1083MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 0, freq = 350MHz, status = 0x00000020 [0x10/00] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 1, freq = 350MHz, status = 0x00000020 [0x10/00] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 2, freq = 350MHz, status = 0x00000020 [0x10/00] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 3, freq = 350MHz, status = 0x00000020 [0x10/00] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 4, freq = 350MHz, status = 0x00000020 [0x10/00] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 5, freq = 350MHz, status = 0x00000020 [0x10/00] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 6, freq = 350MHz, status = 0x00000020 [0x10/00] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 7, freq = 350MHz, status = 0x00000020 [0x10/00] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 8, freq = 350MHz, status = 0x00000020 [0x10/00] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 9, freq = 350MHz, status = 0x00000020 [0x10/00] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 10, freq = 350MHz, status = 0x00000020 [0x10/00] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 11, freq = 350MHz, status = 0x00000020 [0x10/00] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 12, freq = 350MHz, status = 0x00000020 [0x10/00] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 13, freq = 350MHz, status = 0x00000020 [0x10/00] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 14, freq = 350MHz, status = 0x00000020 [0x10/00] (i915_selftest:5580) igt_kmod-WARNING: heartbeat rcs0 heartbeat {seqno:f6dd:2237, prio:2147483646} not ticking (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09Awake? 5 (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09Barriers?: no (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09Latency: 54us (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09Runtime: 5818ms (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09Forcewake: 0 domains, 0 active (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09Heartbeat: 3008 ms ago (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09Reset count: 16462 (global 135) (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09Properties: (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09\x09heartbeat_interval_ms: 2500 [default 2500] (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09\x09max_busywait_duration_ns: 8000 [default 8000] (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09\x09preempt_timeout_ms: 640 [default 640] (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09\x09stop_timeout_ms: 100 [default 100] (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09\x09timeslice_duration_ms: 1 [default 1] (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09Requests: (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09On hold?: 0 (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09MMIO base: 0x00002000 (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09EL_STAT_HI: 0x00000000 (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09EL_STAT_LO: 0x00000001 (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09RING_START: 0x00000000 (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09RING_HEAD: 0x00000000 (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09RING_TAIL: 0x00000000 (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09RING_CTL: 0x00000000 (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09RING_MODE: 0x00000200 [idle] (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09RING_IMR: 0xffffffff (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09RING_ESR: 0x00000000 (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09RING_EMR: 0xffffffff (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09RING_EIR: 0x00000000 (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09ACTHD: 0x00000000_00000000 (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09BBADDR: 0x00000000_00000000 (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09DMA_FADDR: 0x00000000_00000000 (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09IPEIR: 0x00000000 (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09IPEHR: 0x00000000 (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09Execlist tasklet queued? yes (disabled), preempt? inactive, timeslice? inactive (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09Execlist status: 0x00000001 00000000; CSB read:5, write:5, entries:6 (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09\x09Queue priority hint: -1024 (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09\x09R f6dd:2237* prio=2147483646 @ 3008ms: [i915] (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09\x09R f95a:134* prio=0 @ 15261ms: (i915_selftest:5580) igt_kmod-WARNING: heartbeat \x09\x09R f95a:136 prio=0 @ 15258ms: (i915_selftest:5580) igt_kmod-WARNING: heartbeat HWSP: (i915_selftest:5580) igt_kmod-WARNING: heartbeat [0000] 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a (i915_selftest:5580) igt_kmod-WARNING: heartbeat * (i915_selftest:5580) igt_kmod-WARNING: heartbeat [0040] ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff (i915_selftest:5580) igt_kmod-WARNING: heartbeat [0060] ffffffff ffffffff ffffffff ffffffff 5a5a5a5a 5a5a5a5a 5a5a5a5a 00000005 (i915_selftest:5580) igt_kmod-WARNING: heartbeat [0080] 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a (i915_selftest:5580) igt_kmod-WARNING: heartbeat * (i915_selftest:5580) igt_kmod-WARNING: heartbeat [00c0] 5a5a5a5a 5a5a5a5a 00000000 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a (i915_selftest:5580) igt_kmod-WARNING: heartbeat [00e0] 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a (i915_selftest:5580) igt_kmod-WARNING: heartbeat [0100] 000008bc 00000000 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a (i915_selftest:5580) igt_kmod-WARNING: heartbeat [0120] 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a (i915_selftest:5580) igt_kmod-WARNING: heartbeat * (i915_selftest:5580) igt_kmod-WARNING: heartbeat Idle? no (i915_selftest:5580) igt_kmod-WARNING: heartbeat IRQ: disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GPU HANG: ecode 9:0:00000000 (i915_selftest:5580) igt_kmod-WARNING: GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace. (i915_selftest:5580) igt_kmod-WARNING: Please file a _new_ bug report at https://gitlab.freedesktop.org/drm/intel/issues/new. (i915_selftest:5580) igt_kmod-WARNING: Please see https://drm.pages.freedesktop.org/intel-docs/how-to-file-i915-bugs.html for details. (i915_selftest:5580) igt_kmod-WARNING: drm/i915 developers can then reassign to the right component if it's not a kernel issue. (i915_selftest:5580) igt_kmod-WARNING: The GPU crash dump is required to analyze GPU hangs, so please always attach it. (i915_selftest:5580) igt_kmod-WARNING: GPU crash dump saved to /sys/class/drm/card0/error (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 15, freq = 350MHz, status = 0x00000020 [0x10/00] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 16, freq = 350MHz, status = 0x00000020 [0x10/00] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 17, freq = 350MHz, status = 0x00000020 [0x10/00] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 18, freq = 350MHz, status = 0x00000020 [0x10/00] (i915_selftest:5580) igt_kmod-WARNING: Fence expiration time out i915-0000:00:02.0::86! (i915_selftest:5580) igt_kmod-WARNING: Fence expiration time out i915-0000:00:02.0::88! (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 19, freq = 350MHz, status = 0x00000020 [0x10/00] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: load failed: status = 0x00000020, time = 20043ms, freq = 350MHz, ret = -110 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: load failed: status: Reset = 0, BootROM = 0x10, UKernel = 0x00, MIA = 0x00, Auth = 0x00 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:__uc_init_hw [i915]] GT0: GuC fw load failed (-ETIMEDOUT) will reset and retry 2 more time(s) (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: submission disabled (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled (i915_selftest:5580) igt_kmod-WARNING: Fence error status not zero [-4] after unrelated reset (i915_selftest:5580) igt_kmod-WARNING: i915/intel_hangcheck_live_selftests: igt_reset_queue failed with error -22 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D (i915_selftest:5580) igt_kmod-WARNING: intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] (i915_selftest:5580) igt_kmod-WARNING: i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper (i915_selftest:5580) igt_kmod-WARNING: i915: probe of 0000:00:02.0 failed with error -22 (i915_selftest:5580) igt_kmod-CRITICAL: Test assertion failure function igt_kselftest_execute, file ../../../usr/src/igt-gpu-tools/lib/igt_kmod.c:1476: (i915_selftest:5580) igt_kmod-CRITICAL: Failed assertion: err == 0 (i915_selftest:5580) igt_kmod-CRITICAL: kselftest "i915 igt__46__live_hangcheck=1 live_selftests=-1 disable_display=1 st_filter=" failed: Invalid argument [22] (i915_selftest:5580) igt_core-INFO: Stack trace: (i915_selftest:5580) igt_core-INFO: #0 ../../../usr/src/igt-gpu-tools/lib/igt_core.c:1989 __igt_fail_assert() (i915_selftest:5580) igt_core-INFO: #1 ../../../usr/src/igt-gpu-tools/lib/igt_kmod.c:1483 igt_kselftest_execute() (i915_selftest:5580) igt_core-INFO: #2 [<unknown>+0x8995e2ce] ** END ** Dynamic subtest hangcheck: FAIL (44.958s)
Dmesg Scroll to first warning	<6> [281.774532] [IGT] i915_selftest: starting dynamic subtest hangcheck <5> [281.878996] Setting dangerous option enable_guc - tainting kernel <5> [281.879003] Setting dangerous option live_selftests - tainting kernel <7> [281.914159] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [281.914404] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no) <6> [281.914579] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A <7> [281.914589] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH <7> [281.914751] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [281.914966] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [281.915109] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz <7> [281.915814] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [281.915995] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [281.916125] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [281.916251] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [281.916256] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [281.916494] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [281.916511] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = c7f00047 <7> [281.916660] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [281.917092] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xc2a48018 <7> [281.917378] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [281.917593] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [281.917780] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [281.917937] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [281.921240] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [281.921403] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [281.921551] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [281.921699] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [281.921846] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [281.921960] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [281.922070] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [281.922177] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [281.922313] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [281.922484] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [281.922654] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [281.922822] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [281.922991] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [281.923142] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [281.923704] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [281.923885] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 206 <7> [281.924061] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [281.924253] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [281.924429] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [281.924591] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [281.924753] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812) <7> [281.924915] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [281.925076] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [281.925251] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [281.925425] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [281.925588] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [281.925746] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 <7> [281.925901] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [281.926057] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [281.926228] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [281.926402] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [281.926564] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [281.926725] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [281.926882] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [281.927040] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 4 <7> [281.927196] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [281.927375] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [281.927547] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [281.927705] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 8 <7> [281.927862] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [281.928019] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7> [281.928202] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [281.928426] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [281.928638] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [281.928814] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [281.928976] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [281.929140] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [281.929308] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz <7> [281.929481] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [281.929688] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [281.929847] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [281.930004] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [281.930170] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [281.930380] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [281.930540] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [281.930698] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [281.930857] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [281.931046] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <6> [281.931720] i915 0000:00:02.0: [drm] Disabling framebuffer compression (FBC) to prevent screen flicker with VT-d enabled <7> [281.931725] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0 <7> [281.931893] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [281.932130] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [281.932257] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [281.932370] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [281.932536] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [281.932610] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [281.932775] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [281.932987] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <6> [281.933190] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <7> [281.933177] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [281.933360] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [281.933508] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [281.933655] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [281.933801] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [281.933948] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [281.935123] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [281.936108] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [281.936324] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B] <7> [281.936479] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [281.936794] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:103:DDI C/PHY C] <7> [281.936940] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:103:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [281.937275] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:107:DDI D/PHY D] Using AUX CH D (VBT) <7> [281.937516] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:107:DDI D/PHY D] <7> [281.948220] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [281.959222] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [281.970219] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [281.981221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [281.992220] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.003221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.014220] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.025221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.036220] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.047221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.058219] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.069221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.080220] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.091221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.102221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.113221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.124220] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.135221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.146219] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.157220] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.168221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.179224] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.190219] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.201222] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.212219] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.223221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.234220] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.245222] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.256220] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.267221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.278220] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.289221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.289436] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX D/DDI D/PHY D: Too many retries, giving up. First error: -110 <7> [282.289450] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel <7> [282.300221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.311222] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.322219] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.333221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.344219] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.355221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.366221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.377221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.388220] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.399221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.410219] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.421219] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.432220] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.443223] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.454218] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.465221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.476219] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.487221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.498219] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.509221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.520219] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.531221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.542219] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.553221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.564219] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.575220] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.586221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.597220] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.608221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.619222] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.630221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.641221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f) <7> [282.641436] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX D/DDI D/PHY D: Too many retries, giving up. First error: -110 <7> [282.641450] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [282.641608] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:107:DDI D/PHY D] <7> [282.641754] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:107:DDI D/PHY D] Using DDC pin 0x6 (VBT) <7> [282.641980] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:118:DDI E/PHY E] Using AUX CH A (VBT) <7> [282.642142] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:118:DDI E/PHY E] <7> [282.642964] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel <7> [282.643598] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [282.643885] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [282.644114] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [282.644363] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [282.644536] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [282.644704] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [282.644873] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [282.645040] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [282.645219] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [282.645392] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [282.645560] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [282.645727] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [282.645894] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [282.646061] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [282.646250] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:103:DDI C/PHY C] hw state readout: disabled, pipe A <7> [282.646464] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:107:DDI D/PHY D] hw state readout: disabled, pipe A <7> [282.646685] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST A] hw state readout: disabled, pipe A <7> [282.646906] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST B] hw state readout: disabled, pipe B <7> [282.647127] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:111:DP-MST C] hw state readout: disabled, pipe C <7> [282.647395] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DDI E/PHY E] hw state readout: disabled, pipe A <7> [282.647610] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [282.647795] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [282.647970] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [282.648142] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [282.648376] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled <7> [282.648616] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:104:HDMI-A-2] hw state readout: disabled <7> [282.648893] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:108:DP-1] hw state readout: disabled <7> [282.649170] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:115:HDMI-A-3] hw state readout: disabled <7> [282.649417] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:119:DP-2] hw state readout: disabled <7> [282.649572] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [282.649724] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [282.649874] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [282.650033] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [282.650278] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [282.650504] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [282.650727] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [282.650917] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [282.651081] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [282.651250] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [282.651406] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [282.651573] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [282.651900] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [282.652135] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [282.652377] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [282.652585] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [282.652755] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [282.652909] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [282.653058] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [282.655608] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [160K, 864K) <7> [282.655760] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [282.655889] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000] <7> [282.656027] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [282.656177] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 6 GT workarounds on global <7> [282.658438] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [282.658595] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [282.658743] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0 <7> [282.661970] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7> [282.662166] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 6 ext-regs. <7> [282.662370] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7> [282.684615] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xd804f <7> [282.684801] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0 <7> [282.684955] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000 <7> [282.685106] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7> [282.685271] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x9b2 <7> [282.685486] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x19120006 <7> [282.685703] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7> [282.685921] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7> [282.686139] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7> [282.686345] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7> [282.686508] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7> [282.686660] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7> [282.686812] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7> [282.686962] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <7> [282.687113] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no <6> [282.688520] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [282.688524] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [282.695335] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 5ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [282.696045] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [282.696264] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [282.696268] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [282.705965] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [282.706115] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [282.706261] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [282.706391] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [282.706693] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [282.707071] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [282.707234] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [282.707397] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [282.707544] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [282.707710] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [282.710549] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event <7> [282.710884] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:104:HDMI-A-2] generating connector hotplug event <7> [282.711203] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX D/DDI D/PHY D bus for card0-DP-1 <7> [282.712160] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:108:DP-1] generating connector hotplug event <7> [282.712721] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:115:HDMI-A-3] generating connector hotplug event <7> [282.713310] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-2 <7> [282.714139] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:119:DP-2] generating connector hotplug event <6> [282.714186] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0 <7> [282.715981] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [282.731683] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [282.732575] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input88 <7> [282.733154] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [282.734116] i915 display info: display version: 9 <7> [282.734120] i915 display info: cursor_needs_physical: no <7> [282.734123] i915 display info: has_cdclk_crawl: no <7> [282.734125] i915 display info: has_cdclk_squash: no <7> [282.734128] i915 display info: has_ddi: yes <7> [282.734130] i915 display info: has_dp_mst: yes <7> [282.734133] i915 display info: has_dsb: no <7> [282.734135] i915 display info: has_fpga_dbg: yes <7> [282.734137] i915 display info: has_gmch: no <7> [282.734140] i915 display info: has_hotplug: yes <7> [282.734142] i915 display info: has_hti: no <7> [282.734141] [drm:drm_client_modeset_probe] <7> [282.734144] i915 display info: has_ipc: yes <7> [282.734147] i915 display info: has_overlay: no <7> [282.734150] i915 display info: has_psr: yes <7> [282.734152] i915 display info: has_psr_hw_tracking: yes <7> [282.734155] i915 display info: overlay_needs_physical: no <7> [282.734157] i915 display info: supports_tv: no <7> [282.734160] i915 display info: has_hdcp: yes <7> [282.734162] i915 display info: has_dmc: yes <7> [282.734164] i915 display info: has_dsc: no <7> [282.734181] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] <7> [282.734189] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [282.734169] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [282.734368] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected <7> [282.734383] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected <7> [282.734390] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] <7> [282.734396] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [282.734447] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [282.734588] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] status updated from unknown to disconnected <7> [282.734597] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] disconnected <7> [282.734603] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] <7> [282.734609] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [282.734656] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [282.734798] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] status updated from unknown to disconnected <7> [282.734810] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] disconnected <7> [282.734818] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] <7> [282.734824] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [282.734834] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [282.734977] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] status updated from unknown to disconnected <7> [282.734984] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] disconnected <7> [282.734988] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] <7> [282.734993] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [282.735139] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] status updated from unknown to disconnected <7> [282.735146] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] disconnected <7> [282.735149] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [282.735152] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [282.735155] [drm:drm_client_modeset_probe] connector 104 enabled? no <7> [282.735158] [drm:drm_client_modeset_probe] connector 108 enabled? no <7> [282.735160] [drm:drm_client_modeset_probe] connector 115 enabled? no <7> [282.735163] [drm:drm_client_modeset_probe] connector 119 enabled? no <7> [282.735189] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [282.735196] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [282.735387] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [282.735394] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [282.735400] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [282.735562] i915 device info: pciid=0x1912 rev=0x06 platform=SKYLAKE (subplatform=0x0) gen=9 <7> [282.735566] i915 device info: graphics version: 9 <7> [282.735567] i915 device info: media version: 9 <7> [282.735569] i915 device info: graphics stepping: G0 <7> [282.735571] i915 device info: media stepping: G0 <7> [282.735572] i915 device info: display stepping: G0 <7> [282.735573] i915 device info: base die stepping: ** <7> [282.735575] i915 device info: gt: 2 <7> [282.735576] i915 device info: memory-regions: 0x21 <7> [282.735578] i915 device info: page-sizes: 0x11000 <7> [282.735580] i915 device info: platform: SKYLAKE <7> [282.735581] i915 device info: ppgtt-size: 48 <7> [282.735583] i915 device info: ppgtt-type: 2 <7> [282.735584] i915 device info: dma_mask_size: 39 <7> [282.735586] i915 device info: is_mobile: no <7> [282.735587] i915 device info: is_lp: no <7> [282.735588] i915 device info: require_force_probe: no <7> [282.735590] i915 device info: is_dgfx: no <7> [282.735591] i915 device info: has_64bit_reloc: yes <7> [282.735593] i915 device info: has_64k_pages: no <7> [282.735594] i915 device info: gpu_reset_clobbers_display: no <7> [282.735596] i915 device info: has_reset_engine: yes <7> [282.735597] i915 device info: has_3d_pipeline: yes <7> [282.735599] i915 device info: has_flat_ccs: no <7> [282.735600] i915 device info: has_global_mocs: no <7> [282.735602] i915 device info: has_gmd_id: no <7> [282.735603] i915 device info: has_gt_uc: yes <7> [282.735604] i915 device info: has_heci_pxp: no <7> [282.735606] i915 device info: has_heci_gscfi: no <7> [282.735607] i915 device info: has_guc_deprivilege: no <7> [282.735609] i915 device info: has_guc_tlb_invalidation: no <7> [282.735610] i915 device info: has_l3_ccs_read: no <7> [282.735612] i915 device info: has_l3_dpf: no <7> [282.735613] i915 device info: has_llc: yes <7> [282.735614] i915 device info: has_logical_ring_contexts: yes <7> [282.735616] i915 device info: has_logical_ring_elsq: no <7> [282.735617] i915 device info: has_media_ratio_mode: no <7> [282.735619] i915 device info: has_mslice_steering: no <7> [282.735620] i915 device info: has_oa_bpc_reporting: no <7> [282.735622] i915 device info: has_oa_slice_contrib_limits: no <7> [282.735623] i915 device info: has_oam: no <7> [282.735625] i915 device info: has_one_eu_per_fuse_bit: no <7> [282.735626] i915 device info: has_pxp: no <7> [282.735627] i915 device info: has_rc6: yes <7> [282.735629] i915 device info: has_rc6p: no <7> [282.735630] i915 device info: has_rps: yes <7> [282.735632] i915 device info: has_runtime_pm: yes <7> [282.735633] i915 device info: has_snoop: no <7> [282.735634] i915 device info: has_coherent_ggtt: yes <7> [282.735636] i915 device info: tuning_thread_rr_after_dep: no <7> [282.735637] i915 device info: unfenced_needs_alignment: no <7> [282.735639] i915 device info: hws_needs_physical: no <7> [282.735640] i915 device info: has_pooled_eu: no <7> [282.735642] i915 device info: rawclk rate: 24000 kHz <7> [282.735643] i915 device info: iommu: enabled <7> [282.735645] i915 device info: available engines: 40403 <7> [282.735647] i915 device info: slice total: 1, mask=0001 <7> [282.735649] i915 device info: subslice total: 3 <7> [282.735650] i915 device info: slice0: 3 subslices, mask=00000007 <7> [282.735652] i915 device info: slice1: 0 subslices, mask=00000000 <7> [282.735654] i915 device info: slice2: 0 subslices, mask=00000000 <7> [282.735655] i915 device info: EU total: 24 <7> [282.735657] i915 device info: EU per subslice: 8 <7> [282.735658] i915 device info: has slice power gating: no <7> [282.735660] i915 device info: has subslice power gating: no <7> [282.735661] i915 device info: has EU power gating: yes <6> [282.735663] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [282.735665] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [282.735667] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [282.735669] i915: Performing live selftests with st_random_seed=0xc1addfd8 st_timeout=500 <6> [282.735671] i915: Running hangcheck <6> [282.735696] i915: Running intel_hangcheck_live_selftests/igt_hang_sanitycheck <7> [282.735942] [drm:drm_client_modeset_probe] <7> [282.735995] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] <7> [282.736003] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [282.736161] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected <7> [282.736168] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] <7> [282.736174] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [282.736374] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] disconnected <7> [282.736382] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] <7> [282.736389] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [282.736586] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] disconnected <7> [282.736590] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] <7> [282.736595] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [282.736741] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] disconnected <7> [282.736745] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] <7> [282.736749] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [282.736895] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] disconnected <7> [282.736898] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [282.736902] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [282.736904] [drm:drm_client_modeset_probe] connector 104 enabled? no <7> [282.736907] [drm:drm_client_modeset_probe] connector 108 enabled? no <7> [282.736909] [drm:drm_client_modeset_probe] connector 115 enabled? no <7> [282.736912] [drm:drm_client_modeset_probe] connector 119 enabled? no <7> [282.736923] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [282.736930] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [282.736944] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [282.736950] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <6> [282.778505] i915: Running intel_hangcheck_live_selftests/igt_reset_nop <6> [282.783665] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [282.783714] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [282.785961] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [282.786599] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [282.786863] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [282.786866] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [282.792686] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [282.792690] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [282.795135] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [282.795392] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [282.795574] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [282.795577] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [282.800376] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [282.800380] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [282.802837] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [282.803100] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [282.803343] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [282.803345] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [282.807870] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [282.807875] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [282.810297] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [282.810544] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [282.810726] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [282.810729] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [282.815145] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [282.815150] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [282.817344] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [282.817591] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [282.817773] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [282.817776] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [282.821790] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [282.821794] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [282.824293] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [282.824553] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [282.824746] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [282.824748] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [282.828620] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [282.828624] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [282.831192] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [282.831458] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [282.831650] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [282.831653] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [282.835608] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [282.835613] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [282.838060] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [282.838330] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [282.838512] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [282.838515] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [282.842017] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [282.842021] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [282.844309] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [282.844554] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [282.844736] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [282.844738] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [282.848966] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [282.848970] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [282.851340] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [282.851370] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [282.851584] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [282.851768] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [282.851770] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [282.856692] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [282.856697] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [282.859035] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [282.859343] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [282.859541] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [282.859544] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [282.864994] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [282.864999] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [282.867332] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [282.867596] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [282.867792] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [282.867795] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [282.872408] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [282.872412] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [282.874862] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [282.875131] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [282.875371] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [282.875375] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [282.880372] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [282.880379] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [282.882898] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [282.883269] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [282.883551] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [282.883555] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [282.888849] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [282.888855] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [282.891241] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [282.891597] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [282.891878] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [282.891882] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [282.895898] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [282.895902] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [282.898325] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [282.898605] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [282.898813] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [282.898816] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [282.902697] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [282.902701] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [282.905236] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [282.905510] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [282.905718] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [282.905721] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [282.909649] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [282.909653] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [282.911932] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [282.912222] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [282.912421] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [282.912424] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [282.916312] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [282.916316] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [282.918595] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [282.918854] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [282.919051] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [282.919054] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [282.922914] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [282.922918] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [282.925336] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [282.925594] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [282.925790] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [282.925793] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [282.929722] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [282.929726] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [282.932236] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [282.932496] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [282.932694] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [282.932696] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [282.936603] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [282.936607] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [282.938960] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [282.939260] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [282.939460] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [282.939463] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [282.943343] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [282.943347] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [282.945688] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [282.945945] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [282.946173] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [282.946176] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [282.950829] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [282.950834] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [282.953311] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [282.953573] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [282.953771] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [282.953773] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [282.957627] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [282.957631] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [282.959975] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [282.960294] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [282.960494] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [282.960497] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [282.964505] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [282.964510] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [282.966981] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [282.967318] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [282.967600] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [282.967603] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [282.972148] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [282.972152] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [282.974342] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [282.974605] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [282.974801] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [282.974803] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [282.979550] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [282.979555] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [282.981947] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [282.982221] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [282.982420] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [282.982423] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [282.987046] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [282.987051] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [282.989326] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [282.989589] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [282.989786] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [282.989789] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [282.994379] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [282.994385] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [282.996898] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [282.997264] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [282.997545] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [282.997549] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [283.002148] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [283.002152] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [283.004706] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [283.004970] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [283.005164] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [283.005166] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [283.009556] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [283.009562] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [283.011941] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [283.012283] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [283.012543] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [283.012547] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [283.017573] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [283.017579] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [283.020059] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [283.020513] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [283.020772] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [283.020776] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [283.024849] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [283.024853] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [283.027286] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [283.027536] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [283.027718] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [283.027720] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [283.031952] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [283.031958] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [283.034239] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [283.034571] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [283.034829] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [283.034833] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [283.039165] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [283.039170] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [283.041235] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [283.041480] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [283.041662] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [283.041664] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [283.045908] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [283.045912] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [283.048279] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [283.048525] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [283.048708] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [283.048711] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [283.052447] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [283.052451] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [283.054889] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [283.056018] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [283.056969] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [283.056984] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [283.069358] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [283.069366] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [283.071995] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [283.072612] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [283.073058] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [283.073064] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [283.078235] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [283.078242] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [283.080654] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [283.080936] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [283.081159] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [283.081162] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [283.087132] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [283.087137] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [283.089315] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [283.089573] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [283.089772] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [283.089774] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [283.094050] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [283.094054] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [283.096348] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [283.096621] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [283.096803] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [283.096806] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [283.101911] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [283.101915] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [283.104323] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [283.104577] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [283.104761] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [283.104763] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [283.109130] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [283.109134] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [283.111322] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [283.111566] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [283.111747] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [283.111750] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [283.116045] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [283.116049] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [283.118320] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [283.118564] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [283.118745] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [283.118747] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [283.122434] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [283.122439] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [283.124793] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [283.125608] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [283.126265] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [283.126274] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [283.136848] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [283.136856] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [283.139738] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [283.140564] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [283.141169] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [283.141178] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [283.152654] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [283.152662] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [283.155332] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [283.155701] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [283.155996] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [283.156000] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [283.162349] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [283.162355] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [283.164809] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [283.165101] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [283.165495] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [283.165499] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [283.169922] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [283.169927] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [283.172278] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1100MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [283.172542] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [283.172739] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [283.172742] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [283.176599] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [283.176603] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [283.178891] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [283.179132] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [283.179348] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [283.179351] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [283.182998] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [283.183002] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [283.184946] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1117MHz, before = 1117MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [283.185192] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [283.185407] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [283.185410] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [283.188928] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [283.188933] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [283.191324] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [283.191581] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [283.191774] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [283.191777] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [283.195295] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [283.195299] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [283.197343] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [283.197600] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [283.197793] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [283.197795] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [283.201437] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [283.201441] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [283.203863] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [283.204119] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [283.204351] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [283.204354] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [283.208253] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [283.208258] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [283.210737] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [283.210995] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [283.211188] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [283.211190] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [283.214726] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [283.214730] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [283.217282] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1050MHz, before = 1117MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [283.217543] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [283.217737] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [283.217739] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [283.221540] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [283.221544] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [283.224047] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [283.224313] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [283.224507] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [283.224509] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [283.228302] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [283.228306] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [283.230638] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [283.230880] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [283.231062] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [283.231064] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [283.234746] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [283.234750] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [283.237166] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [283.237442] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [283.237636] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [283.237639] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [283.241338] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [283.241342] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [283.243787] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [283.244043] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [283.244296] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [283.244300] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [283.248107] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [283.248111] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [283.250342] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1117MHz, before = 1117MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [283.250588] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [283.250770] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [283.250772] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [283.255642] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [283.255646] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [283.258010] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [283.258331] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [283.258517] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [283.258520] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [283.262936] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [283.262940] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [283.265198] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [283.265451] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [283.265633] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [283.265636] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [283.269080] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [283.269084] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [283.271350] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [283.271610] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [283.271803] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [283.271805] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [283.275532] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [283.275536] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [283.277977] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [283.278394] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [283.278583] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [283.278585] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [283.279296] igt_reset_nop: 66 resets <6> [283.310452] i915: Running intel_hangcheck_live_selftests/igt_reset_nop_engine <6> [283.811331] igt_reset_nop_engine(rcs0): 764 resets <6> [284.313011] igt_reset_nop_engine(bcs0): 870 resets <6> [284.813468] igt_reset_nop_engine(vcs0): 880 resets <6> [285.314746] igt_reset_nop_engine(vecs0): 885 resets <6> [285.336409] i915: Running intel_hangcheck_live_selftests/igt_reset_idle_engine <6> [285.837329] rcs0: Completed 4030 idle resets <6> [286.338400] bcs0: Completed 5559 idle resets <6> [286.839376] vcs0: Completed 5495 idle resets <6> [287.340338] vecs0: Completed 5632 idle resets <6> [287.340354] i915: Running intel_hangcheck_live_selftests/igt_reset_active_engine <6> [287.841354] rcs0: Completed 902 active resets <6> [288.342483] bcs0: Completed 1118 active resets <6> [288.843600] vcs0: Completed 1091 active resets <6> [289.344322] vecs0: Completed 1033 active resets <6> [289.376441] i915: Running intel_hangcheck_live_selftests/igt_reset_fail_engine <6> [289.877297] igt_reset_fail_engine(rcs0): 1453 resets <6> [290.378375] igt_reset_fail_engine(bcs0): 1736 resets <6> [290.879698] igt_reset_fail_engine(vcs0): 1754 resets <6> [291.380397] igt_reset_fail_engine(vecs0): 1545 resets <6> [291.398345] i915: Running intel_hangcheck_live_selftests/igt_reset_engines <6> [291.899329] i915_reset_engine(rcs0:idle): 1962 resets <6> [292.400414] i915_reset_engine(bcs0:idle): 2746 resets <6> [292.901264] i915_reset_engine(vcs0:idle): 3105 resets <6> [293.402371] i915_reset_engine(vecs0:idle): 2965 resets <6> [293.903698] i915_reset_engine(rcs0:active): 811 resets <6> [294.404595] i915_reset_engine(bcs0:active): 955 resets <6> [294.905638] i915_reset_engine(vcs0:active): 958 resets <6> [295.406488] i915_reset_engine(vecs0:active): 966 resets <6> [295.907308] i915_reset_engine(rcs0:others-idle): 4395 resets <6> [296.409240] i915_reset_engine(bcs0:others-idle): 5217 resets <6> [296.911249] i915_reset_engine(vcs0:others-idle): 5281 resets <6> [297.413217] i915_reset_engine(vecs0:others-idle): 5490 resets <6> [297.917317] i915_reset_engine(rcs0:others-active): 627 resets <6> [298.419627] i915_reset_engine(bcs0:others-active): 689 resets <6> [298.922614] i915_reset_engine(vcs0:others-active): 808 resets <6> [299.425325] i915_reset_engine(vecs0:others-active): 745 resets <6> [299.928746] i915_reset_engine(rcs0:others-priority): 667 resets <6> [300.431284] i915_reset_engine(bcs0:others-priority): 620 resets <6> [300.933882] i915_reset_engine(vcs0:others-priority): 692 resets <6> [301.436265] i915_reset_engine(vecs0:others-priority): 789 resets <6> [301.938257] i915_reset_engine(rcs0:self-priority): 847 resets <6> [302.439253] i915_reset_engine(bcs0:self-priority): 909 resets <6> [302.940311] i915_reset_engine(vcs0:self-priority): 851 resets <6> [303.441252] i915_reset_engine(vecs0:self-priority): 890 resets <6> [303.467438] i915: Running intel_hangcheck_live_selftests/igt_reset_engines_atomic <7> [303.467452] intel_gt_set_wedged called from igt_force_reset+0xd/0xd0 [i915] <6> [303.468970] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.468974] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.475343] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.476008] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.476218] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.476222] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [303.499089] intel_gt_set_wedged called from igt_force_reset+0xd/0xd0 [i915] <6> [303.499836] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.499842] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.505360] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.505695] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.505890] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.505892] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.536428] i915: Running intel_hangcheck_live_selftests/igt_reset_queue <6> [303.539071] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.539076] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.541319] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.541647] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.541899] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.541902] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.543455] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.543460] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.546085] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1117MHz, before = 1117MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.546446] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.546699] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.546702] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.547833] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.547840] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.550273] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1017MHz, before = 1017MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.550617] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.550855] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.550858] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.551989] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.551994] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.554239] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.554535] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.554773] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.554776] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.555896] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.555902] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.558248] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.558545] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.558781] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.558784] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.559928] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.559933] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.562278] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.562575] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.562812] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.562815] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.563945] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.563950] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.566252] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.566550] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.566788] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.566791] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.567917] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.567924] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.570333] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.570639] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.570875] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.570879] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.571985] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.571990] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.574235] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.574532] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.574769] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.574772] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.575897] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.575902] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.578251] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.578550] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.578787] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.578790] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.579919] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.579924] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.582284] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.582592] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.582830] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.582833] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.583964] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.583969] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.586348] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1100MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.586647] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.586857] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.586860] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.587873] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.587877] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.590305] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1083MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.590562] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.590760] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.590763] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.591697] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.591701] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.593885] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.594122] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.594367] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.594371] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.595226] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.595230] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.597714] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1100MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.597965] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.598158] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.598161] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.599078] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.599082] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.601325] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1083MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.601563] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.601744] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.601747] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.602672] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.602677] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.604970] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.605260] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.605524] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.605528] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.606322] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.606326] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.608745] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.608996] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.609189] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.609191] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.610110] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.610114] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.612258] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.612496] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.612678] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.612681] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.613588] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.613592] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.616000] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1100MHz, before = 1100MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.616282] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.616545] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.616549] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.617361] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.617365] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.619768] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.620004] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.620186] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.620189] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.621114] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.621118] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.623227] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.623464] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.623647] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.623649] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.624570] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.624573] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.626960] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.627230] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.627493] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.627497] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.628315] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.628319] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.630742] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.630978] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.631160] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.631163] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.632093] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.632097] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.634294] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.634529] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.634711] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.634714] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.635646] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.635650] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.637907] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.638145] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.638372] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.638376] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.639325] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.639329] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.641659] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.641911] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.642105] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.642107] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.642843] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.642849] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.645225] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1117MHz, before = 1117MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.645480] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.645673] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.645675] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.646368] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.646374] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.648648] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1017MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.648888] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.649070] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.649073] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.649781] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.649785] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.652122] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.652385] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.652577] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.652580] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.653288] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.653294] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.655289] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.655544] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.655726] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.655729] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.656438] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.656444] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.658797] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.659048] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.659258] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.659260] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.660007] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.660012] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.662309] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.662546] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.662729] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.662731] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.663485] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.663490] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.665824] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1117MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.666077] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.666284] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.666286] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.667034] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.667039] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.669305] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1083MHz, before = 1083MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.669546] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.669728] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.669730] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.670434] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.670438] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.672818] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 883MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.673076] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.673282] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.673285] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.674068] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.674072] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.677776] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 617MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.678094] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.678287] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.678290] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.679025] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.679029] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.681348] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.681586] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.681768] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.681770] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.682518] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.682524] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.684857] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1117MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.685109] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.685311] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.685313] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.686064] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.686068] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.688346] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 950MHz, before = 1083MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.688589] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.688770] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.688773] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.689468] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.689472] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.691868] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 883MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.692124] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.692331] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.692334] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.693082] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.693086] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.696631] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 617MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.696989] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.697180] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.697182] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.697886] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.697892] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.700296] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.700547] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.700738] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.700741] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.701437] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.701443] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.703773] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1117MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.704024] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.704230] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.704232] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.704958] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.704962] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.707218] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.707457] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.707640] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.707642] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.708333] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.708339] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.710642] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1117MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.710892] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.711086] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.711088] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.711790] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.711794] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.714135] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.714389] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.714572] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.714574] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.715266] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.715272] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.717297] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1117MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.717549] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.717742] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.717745] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.718446] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.718452] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.720850] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1083MHz, before = 1083MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.721102] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.721308] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.721310] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.721990] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.721996] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.724357] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 750MHz, before = 1017MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.724606] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.724789] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.724791] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.725494] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.725499] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.727880] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 617MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.728136] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.728330] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.728333] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.729073] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.729077] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.735351] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 5ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.735694] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.735874] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.735876] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.736559] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.736565] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.738907] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.739158] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.739360] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.739363] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.740094] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.740098] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.742351] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1117MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.742604] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.742797] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.742800] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.743481] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.743485] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.745778] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1083MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.746016] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.746198] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.746214] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.746925] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.746931] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.749311] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1017MHz, before = 1017MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.749567] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.749760] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.749762] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.750462] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.750468] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.752816] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.753066] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.753276] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.753280] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.754050] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.754054] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.756330] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.756568] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.756749] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.756752] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.757471] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.757475] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.759796] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1117MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.760048] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.760261] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.760264] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.761026] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.761030] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.763333] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1083MHz, before = 1083MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.763587] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.763779] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.763782] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.764481] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.764487] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.766885] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.767136] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.767341] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.767344] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.768030] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.768034] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.770337] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.770575] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.770758] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.770760] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.771494] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.771498] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.773849] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.774100] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.774305] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.774308] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.774980] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.774984] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.777295] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.777535] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.777717] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.777720] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.778425] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.778429] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.780736] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1083MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.780974] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.781157] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.781160] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.781859] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.781865] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [303.784114] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [303.784386] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [303.784570] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [303.784573] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <6> [303.785248] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [303.785251] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [304.788697] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 0, freq = 350MHz, status = 0x00000020 [0x10/00] <7> [305.792032] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 1, freq = 350MHz, status = 0x00000020 [0x10/00] <7> [306.795393] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 2, freq = 350MHz, status = 0x00000020 [0x10/00] <7> [307.798130] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 3, freq = 350MHz, status = 0x00000020 [0x10/00] <7> [308.800518] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 4, freq = 350MHz, status = 0x00000020 [0x10/00] <7> [309.803048] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 5, freq = 350MHz, status = 0x00000020 [0x10/00] <7> [310.805482] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 6, freq = 350MHz, status = 0x00000020 [0x10/00] <7> [311.807980] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 7, freq = 350MHz, status = 0x00000020 [0x10/00] <7> [312.810704] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 8, freq = 350MHz, status = 0x00000020 [0x10/00] <7> [313.813390] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 9, freq = 350MHz, status = 0x00000020 [0x10/00] <7> [314.816057] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 10, freq = 350MHz, status = 0x00000020 [0x10/00] <7> [315.817158] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 11, freq = 350MHz, status = 0x00000020 [0x10/00] <7> [316.819536] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 12, freq = 350MHz, status = 0x00000020 [0x10/00] <7> [317.822183] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 13, freq = 350MHz, status = 0x00000020 [0x10/00] <7> [318.824594] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 14, freq = 350MHz, status = 0x00000020 [0x10/00] <7> [319.042231] heartbeat rcs0 heartbeat {seqno:f6dd:2237, prio:2147483646} not ticking <7> [319.042244] heartbeat Awake? 5 <7> [319.042246] heartbeat Barriers?: no <7> [319.042248] heartbeat Latency: 54us <7> [319.042256] heartbeat Runtime: 5818ms <7> [319.042258] heartbeat Forcewake: 0 domains, 0 active <7> [319.042260] heartbeat Heartbeat: 3008 ms ago <7> [319.042267] heartbeat Reset count: 16462 (global 135) <7> [319.042269] heartbeat Properties: <7> [319.042271] heartbeat heartbeat_interval_ms: 2500 [default 2500] <7> [319.042273] heartbeat max_busywait_duration_ns: 8000 [default 8000] <7> [319.042275] heartbeat preempt_timeout_ms: 640 [default 640] <7> [319.042277] heartbeat stop_timeout_ms: 100 [default 100] <7> [319.042278] heartbeat timeslice_duration_ms: 1 [default 1] <7> [319.042283] heartbeat Requests: <7> [319.042285] heartbeat On hold?: 0 <7> [319.042391] heartbeat MMIO base: 0x00002000 <7> [319.042485] heartbeat EL_STAT_HI: 0x00000000 <7> [319.042488] heartbeat EL_STAT_LO: 0x00000001 <7> [319.042491] heartbeat RING_START: 0x00000000 <7> [319.042493] heartbeat RING_HEAD: 0x00000000 <7> [319.042496] heartbeat RING_TAIL: 0x00000000 <7> [319.042499] heartbeat RING_CTL: 0x00000000 <7> [319.042503] heartbeat RING_MODE: 0x00000200 [idle] <7> [319.042506] heartbeat RING_IMR: 0xffffffff <7> [319.042508] heartbeat RING_ESR: 0x00000000 <7> [319.042511] heartbeat RING_EMR: 0xffffffff <7> [319.042513] heartbeat RING_EIR: 0x00000000 <7> [319.042517] heartbeat ACTHD: 0x00000000_00000000 <7> [319.042520] heartbeat BBADDR: 0x00000000_00000000 <7> [319.042523] heartbeat DMA_FADDR: 0x00000000_00000000 <7> [319.042525] heartbeat IPEIR: 0x00000000 <7> [319.042528] heartbeat IPEHR: 0x00000000 <7> [319.042530] heartbeat Execlist tasklet queued? yes (disabled), preempt? inactive, timeslice? inactive <7> [319.042534] heartbeat Execlist status: 0x00000001 00000000; CSB read:5, write:5, entries:6 <7> [319.042546] heartbeat Queue priority hint: -1024 <7> [319.042548] heartbeat R f6dd:2237* prio=2147483646 @ 3008ms: [i915] <7> [319.042552] heartbeat R f95a:134* prio=0 @ 15261ms: <7> [319.042555] heartbeat R f95a:136 prio=0 @ 15258ms: <7> [319.042557] heartbeat HWSP: <7> [319.042559] heartbeat [0000] 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a <7> [319.042561] heartbeat * <7> [319.042563] heartbeat [0040] ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff <7> [319.042566] heartbeat [0060] ffffffff ffffffff ffffffff ffffffff 5a5a5a5a 5a5a5a5a 5a5a5a5a 00000005 <7> [319.042568] heartbeat [0080] 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a <7> [319.042570] heartbeat * <7> [319.042572] heartbeat [00c0] 5a5a5a5a 5a5a5a5a 00000000 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a <7> [319.042574] heartbeat [00e0] 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a <7> [319.042576] heartbeat [0100] 000008bc 00000000 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a <7> [319.042578] heartbeat [0120] 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a <7> [319.042580] heartbeat * <7> [319.042590] heartbeat Idle? no <7> [319.042592] heartbeat IRQ: disabled <6> [319.064557] i915 0000:00:02.0: [drm] GPU HANG: ecode 9:0:00000000 <6> [319.064560] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace. <6> [319.064562] Please file a _new_ bug report at https://gitlab.freedesktop.org/drm/intel/issues/new. <6> [319.064564] Please see https://drm.pages.freedesktop.org/intel-docs/how-to-file-i915-bugs.html for details. <6> [319.064565] drm/i915 developers can then reassign to the right component if it's not a kernel issue. <6> [319.064567] The GPU crash dump is required to analyze GPU hangs, so please always attach it. <6> [319.064568] GPU crash dump saved to /sys/class/drm/card0/error <7> [319.825038] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 15, freq = 350MHz, status = 0x00000020 [0x10/00] <7> [320.826448] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 16, freq = 350MHz, status = 0x00000020 [0x10/00] <7> [321.827081] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 17, freq = 350MHz, status = 0x00000020 [0x10/00] <7> [322.828036] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 18, freq = 350MHz, status = 0x00000020 [0x10/00] <5> [323.782742] Fence expiration time out i915-0000:00:02.0::86! <5> [323.786087] Fence expiration time out i915-0000:00:02.0::88! <7> [323.829295] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 19, freq = 350MHz, status = 0x00000020 [0x10/00] <6> [323.829503] i915 0000:00:02.0: [drm] GT0: GUC: load failed: status = 0x00000020, time = 20043ms, freq = 350MHz, ret = -110 <6> [323.829506] i915 0000:00:02.0: [drm] GT0: GUC: load failed: status: Reset = 0, BootROM = 0x10, UKernel = 0x00, MIA = 0x00, Auth = 0x00 <7> [323.829509] i915 0000:00:02.0: [drm:__uc_init_hw [i915]] GT0: GuC fw load failed (-ETIMEDOUT) will reset and retry 2 more time(s) <7> [323.835865] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [323.836193] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [323.836407] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [323.836411] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <3> [323.836569] Fence error status not zero [-4] after unrelated reset <3> [323.869368] i915/intel_hangcheck_live_selftests: igt_reset_queue failed with error -22 <7> [323.869415] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [323.869670] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [323.869844] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [323.870015] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [323.870184] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [323.888263] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [323.936198] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <4> [323.985634] i915: probe of 0000:00:02.0 failed with error -22 <6> [326.733934] [IGT] i915_selftest: finished subtest hangcheck, FAIL

<6> [281.774532] [IGT] i915_selftest: starting dynamic subtest hangcheck

<5> [281.878996] Setting dangerous option enable_guc - tainting kernel

<5> [281.879003] Setting dangerous option live_selftests - tainting kernel

<7> [281.914159] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [281.914404] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no)

<6> [281.914579] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A

<7> [281.914589] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH

<7> [281.914751] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [281.914966] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [281.915109] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz

<7> [281.915814] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [281.915995] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [281.916125] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [281.916251] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [281.916256] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [281.916494] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [281.916511] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = c7f00047

<7> [281.916660] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [281.917092] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xc2a48018

<7> [281.917378] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [281.917593] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [281.917780] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [281.917937] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [281.921240] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [281.921403] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [281.921551] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [281.921699] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [281.921846] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [281.921960] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [281.922070] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [281.922177] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [281.922313] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [281.922484] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [281.922654] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [281.922822] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [281.922991] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [281.923142] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [281.923704] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [281.923885] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 206

<7> [281.924061] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [281.924253] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [281.924429] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [281.924591] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [281.924753] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812)

<7> [281.924915] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [281.925076] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [281.925251] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [281.925425] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [281.925588] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [281.925746] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0

<7> [281.925901] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [281.926057] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [281.926228] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [281.926402] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [281.926564] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [281.926725] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [281.926882] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [281.927040] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 4

<7> [281.927196] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [281.927375] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [281.927547] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [281.927705] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 8

<7> [281.927862] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [281.928019] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0

<7> [281.928202] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [281.928426] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [281.928638] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [281.928814] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [281.928976] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [281.929140] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [281.929308] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz

<7> [281.929481] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [281.929688] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [281.929847] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [281.930004] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [281.930170] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [281.930380] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [281.930540] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [281.930698] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [281.930857] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [281.931046] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<6> [281.931720] i915 0000:00:02.0: [drm] Disabling framebuffer compression (FBC) to prevent screen flicker with VT-d enabled

<7> [281.931725] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0

<7> [281.931893] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [281.932130] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [281.932257] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [281.932370] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [281.932536] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [281.932610] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [281.932775] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [281.932987] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<6> [281.933190] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<7> [281.933177] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [281.933360] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [281.933508] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [281.933655] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [281.933801] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [281.933948] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [281.935123] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [281.936108] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [281.936324] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B]

<7> [281.936479] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [281.936794] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:103:DDI C/PHY C]

<7> [281.936940] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:103:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [281.937275] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:107:DDI D/PHY D] Using AUX CH D (VBT)

<7> [281.937516] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:107:DDI D/PHY D]

<7> [281.948220] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [281.959222] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [281.970219] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [281.981221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [281.992220] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.003221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.014220] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.025221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.036220] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.047221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.058219] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.069221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.080220] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.091221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.102221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.113221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.124220] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.135221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.146219] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.157220] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.168221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.179224] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.190219] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.201222] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.212219] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.223221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.234220] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.245222] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.256220] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.267221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.278220] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.289221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.289436] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX D/DDI D/PHY D: Too many retries, giving up. First error: -110

<7> [282.289450] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel

<7> [282.300221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.311222] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.322219] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.333221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.344219] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.355221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.366221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.377221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.388220] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.399221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.410219] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.421219] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.432220] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.443223] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.454218] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.465221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.476219] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.487221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.498219] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.509221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.520219] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.531221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.542219] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.553221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.564219] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.575220] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.586221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.597220] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.608221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.619222] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.630221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.641221] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX D/DDI D/PHY D: timeout (status 0x7d40023f)

<7> [282.641436] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX D/DDI D/PHY D: Too many retries, giving up. First error: -110

<7> [282.641450] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [282.641608] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:107:DDI D/PHY D]

<7> [282.641754] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:107:DDI D/PHY D] Using DDC pin 0x6 (VBT)

<7> [282.641980] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:118:DDI E/PHY E] Using AUX CH A (VBT)

<7> [282.642142] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:118:DDI E/PHY E]

<7> [282.642964] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel

<7> [282.643598] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [282.643885] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [282.644114] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [282.644363] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [282.644536] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [282.644704] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [282.644873] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [282.645040] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [282.645219] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [282.645392] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [282.645560] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [282.645727] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [282.645894] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [282.646061] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [282.646250] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:103:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [282.646464] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:107:DDI D/PHY D] hw state readout: disabled, pipe A

<7> [282.646685] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST A] hw state readout: disabled, pipe A

<7> [282.646906] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST B] hw state readout: disabled, pipe B

<7> [282.647127] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:111:DP-MST C] hw state readout: disabled, pipe C

<7> [282.647395] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DDI E/PHY E] hw state readout: disabled, pipe A

<7> [282.647610] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [282.647795] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [282.647970] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [282.648142] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [282.648376] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled

<7> [282.648616] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:104:HDMI-A-2] hw state readout: disabled

<7> [282.648893] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:108:DP-1] hw state readout: disabled

<7> [282.649170] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:115:HDMI-A-3] hw state readout: disabled

<7> [282.649417] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:119:DP-2] hw state readout: disabled

<7> [282.649572] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [282.649724] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [282.649874] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [282.650033] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [282.650278] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [282.650504] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [282.650727] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [282.650917] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [282.651081] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [282.651250] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [282.651406] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [282.651573] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [282.651900] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [282.652135] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [282.652377] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [282.652585] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [282.652755] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [282.652909] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [282.653058] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [282.655608] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [160K, 864K)

<7> [282.655760] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [282.655889] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000]

<7> [282.656027] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [282.656177] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 6 GT workarounds on global

<7> [282.658438] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [282.658595] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [282.658743] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0

<7> [282.661970] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)

<7> [282.662166] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 6 ext-regs.

<7> [282.662370] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset

<7> [282.684615] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xd804f

<7> [282.684801] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0

<7> [282.684955] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000

<7> [282.685106] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3

<7> [282.685271] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x9b2

<7> [282.685486] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x19120006

<7> [282.685703] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0

<7> [282.685921] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0

<7> [282.686139] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0

<7> [282.686345] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0

<7> [282.686508] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0

<7> [282.686660] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0

<7> [282.686812] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0

<7> [282.686962] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0

<7> [282.687113] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no

<6> [282.688520] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [282.688524] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [282.695335] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 5ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [282.696045] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [282.696264] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [282.696268] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [282.705965] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [282.706115] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [282.706261] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [282.706391] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [282.706693] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [282.707071] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [282.707234] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [282.707397] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [282.707544] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [282.707710] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [282.710549] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event

<7> [282.710884] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:104:HDMI-A-2] generating connector hotplug event

<7> [282.711203] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX D/DDI D/PHY D bus for card0-DP-1

<7> [282.712160] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:108:DP-1] generating connector hotplug event

<7> [282.712721] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:115:HDMI-A-3] generating connector hotplug event

<7> [282.713310] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-2

<7> [282.714139] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:119:DP-2] generating connector hotplug event

<6> [282.714186] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0

<7> [282.715981] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [282.731683] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [282.732575] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input88

<7> [282.733154] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [282.734116] i915 display info: display version: 9

<7> [282.734120] i915 display info: cursor_needs_physical: no

<7> [282.734123] i915 display info: has_cdclk_crawl: no

<7> [282.734125] i915 display info: has_cdclk_squash: no

<7> [282.734128] i915 display info: has_ddi: yes

<7> [282.734130] i915 display info: has_dp_mst: yes

<7> [282.734133] i915 display info: has_dsb: no

<7> [282.734135] i915 display info: has_fpga_dbg: yes

<7> [282.734137] i915 display info: has_gmch: no

<7> [282.734140] i915 display info: has_hotplug: yes

<7> [282.734142] i915 display info: has_hti: no

<7> [282.734141] [drm:drm_client_modeset_probe]

<7> [282.734144] i915 display info: has_ipc: yes

<7> [282.734147] i915 display info: has_overlay: no

<7> [282.734150] i915 display info: has_psr: yes

<7> [282.734152] i915 display info: has_psr_hw_tracking: yes

<7> [282.734155] i915 display info: overlay_needs_physical: no

<7> [282.734157] i915 display info: supports_tv: no

<7> [282.734160] i915 display info: has_hdcp: yes

<7> [282.734162] i915 display info: has_dmc: yes

<7> [282.734164] i915 display info: has_dsc: no

<7> [282.734181] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]

<7> [282.734189] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [282.734169] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [282.734368] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected

<7> [282.734383] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [282.734390] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2]

<7> [282.734396] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [282.734447] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [282.734588] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] status updated from unknown to disconnected

<7> [282.734597] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] disconnected

<7> [282.734603] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1]

<7> [282.734609] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [282.734656] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [282.734798] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] status updated from unknown to disconnected

<7> [282.734810] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] disconnected

<7> [282.734818] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3]

<7> [282.734824] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [282.734834] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [282.734977] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] status updated from unknown to disconnected

<7> [282.734984] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] disconnected

<7> [282.734988] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2]

<7> [282.734993] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [282.735139] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] status updated from unknown to disconnected

<7> [282.735146] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] disconnected

<7> [282.735149] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [282.735152] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [282.735155] [drm:drm_client_modeset_probe] connector 104 enabled? no

<7> [282.735158] [drm:drm_client_modeset_probe] connector 108 enabled? no

<7> [282.735160] [drm:drm_client_modeset_probe] connector 115 enabled? no

<7> [282.735163] [drm:drm_client_modeset_probe] connector 119 enabled? no

<7> [282.735189] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [282.735196] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [282.735387] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [282.735394] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [282.735400] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [282.735562] i915 device info: pciid=0x1912 rev=0x06 platform=SKYLAKE (subplatform=0x0) gen=9

<7> [282.735566] i915 device info: graphics version: 9

<7> [282.735567] i915 device info: media version: 9

<7> [282.735569] i915 device info: graphics stepping: G0

<7> [282.735571] i915 device info: media stepping: G0

<7> [282.735572] i915 device info: display stepping: G0

<7> [282.735573] i915 device info: base die stepping: **

<7> [282.735575] i915 device info: gt: 2

<7> [282.735576] i915 device info: memory-regions: 0x21

<7> [282.735578] i915 device info: page-sizes: 0x11000

<7> [282.735580] i915 device info: platform: SKYLAKE

<7> [282.735581] i915 device info: ppgtt-size: 48

<7> [282.735583] i915 device info: ppgtt-type: 2

<7> [282.735584] i915 device info: dma_mask_size: 39

<7> [282.735586] i915 device info: is_mobile: no

<7> [282.735587] i915 device info: is_lp: no

<7> [282.735588] i915 device info: require_force_probe: no

<7> [282.735590] i915 device info: is_dgfx: no

<7> [282.735591] i915 device info: has_64bit_reloc: yes

<7> [282.735593] i915 device info: has_64k_pages: no

<7> [282.735594] i915 device info: gpu_reset_clobbers_display: no

<7> [282.735596] i915 device info: has_reset_engine: yes

<7> [282.735597] i915 device info: has_3d_pipeline: yes

<7> [282.735599] i915 device info: has_flat_ccs: no

<7> [282.735600] i915 device info: has_global_mocs: no

<7> [282.735602] i915 device info: has_gmd_id: no

<7> [282.735603] i915 device info: has_gt_uc: yes

<7> [282.735604] i915 device info: has_heci_pxp: no

<7> [282.735606] i915 device info: has_heci_gscfi: no

<7> [282.735607] i915 device info: has_guc_deprivilege: no

<7> [282.735609] i915 device info: has_guc_tlb_invalidation: no

<7> [282.735610] i915 device info: has_l3_ccs_read: no

<7> [282.735612] i915 device info: has_l3_dpf: no

<7> [282.735613] i915 device info: has_llc: yes

<7> [282.735614] i915 device info: has_logical_ring_contexts: yes

<7> [282.735616] i915 device info: has_logical_ring_elsq: no

<7> [282.735617] i915 device info: has_media_ratio_mode: no

<7> [282.735619] i915 device info: has_mslice_steering: no

<7> [282.735620] i915 device info: has_oa_bpc_reporting: no

<7> [282.735622] i915 device info: has_oa_slice_contrib_limits: no

<7> [282.735623] i915 device info: has_oam: no

<7> [282.735625] i915 device info: has_one_eu_per_fuse_bit: no

<7> [282.735626] i915 device info: has_pxp: no

<7> [282.735627] i915 device info: has_rc6: yes

<7> [282.735629] i915 device info: has_rc6p: no

<7> [282.735630] i915 device info: has_rps: yes

<7> [282.735632] i915 device info: has_runtime_pm: yes

<7> [282.735633] i915 device info: has_snoop: no

<7> [282.735634] i915 device info: has_coherent_ggtt: yes

<7> [282.735636] i915 device info: tuning_thread_rr_after_dep: no

<7> [282.735637] i915 device info: unfenced_needs_alignment: no

<7> [282.735639] i915 device info: hws_needs_physical: no

<7> [282.735640] i915 device info: has_pooled_eu: no

<7> [282.735642] i915 device info: rawclk rate: 24000 kHz

<7> [282.735643] i915 device info: iommu: enabled

<7> [282.735645] i915 device info: available engines: 40403

<7> [282.735647] i915 device info: slice total: 1, mask=0001

<7> [282.735649] i915 device info: subslice total: 3

<7> [282.735650] i915 device info: slice0: 3 subslices, mask=00000007

<7> [282.735652] i915 device info: slice1: 0 subslices, mask=00000000

<7> [282.735654] i915 device info: slice2: 0 subslices, mask=00000000

<7> [282.735655] i915 device info: EU total: 24

<7> [282.735657] i915 device info: EU per subslice: 8

<7> [282.735658] i915 device info: has slice power gating: no

<7> [282.735660] i915 device info: has subslice power gating: no

<7> [282.735661] i915 device info: has EU power gating: yes

<6> [282.735663] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [282.735665] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [282.735667] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [282.735669] i915: Performing live selftests with st_random_seed=0xc1addfd8 st_timeout=500

<6> [282.735671] i915: Running hangcheck

<6> [282.735696] i915: Running intel_hangcheck_live_selftests/igt_hang_sanitycheck

<7> [282.735942] [drm:drm_client_modeset_probe]

<7> [282.735995] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1]

<7> [282.736003] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [282.736161] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [282.736168] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2]

<7> [282.736174] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [282.736374] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:HDMI-A-2] disconnected

<7> [282.736382] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1]

<7> [282.736389] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [282.736586] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:108:DP-1] disconnected

<7> [282.736590] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3]

<7> [282.736595] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [282.736741] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:115:HDMI-A-3] disconnected

<7> [282.736745] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2]

<7> [282.736749] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [282.736895] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] disconnected

<7> [282.736898] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [282.736902] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [282.736904] [drm:drm_client_modeset_probe] connector 104 enabled? no

<7> [282.736907] [drm:drm_client_modeset_probe] connector 108 enabled? no

<7> [282.736909] [drm:drm_client_modeset_probe] connector 115 enabled? no

<7> [282.736912] [drm:drm_client_modeset_probe] connector 119 enabled? no

<7> [282.736923] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [282.736930] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [282.736944] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [282.736950] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<6> [282.778505] i915: Running intel_hangcheck_live_selftests/igt_reset_nop

<6> [282.783665] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [282.783714] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [282.785961] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [282.786599] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [282.786863] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [282.786866] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [282.792686] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [282.792690] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [282.795135] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [282.795392] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [282.795574] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [282.795577] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [282.800376] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [282.800380] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [282.802837] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [282.803100] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [282.803343] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [282.803345] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [282.807870] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [282.807875] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [282.810297] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [282.810544] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [282.810726] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [282.810729] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [282.815145] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [282.815150] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [282.817344] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [282.817591] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [282.817773] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [282.817776] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [282.821790] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [282.821794] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [282.824293] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [282.824553] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [282.824746] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [282.824748] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [282.828620] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [282.828624] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [282.831192] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [282.831458] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [282.831650] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [282.831653] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [282.835608] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [282.835613] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [282.838060] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [282.838330] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [282.838512] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [282.838515] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [282.842017] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [282.842021] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [282.844309] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [282.844554] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [282.844736] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [282.844738] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [282.848966] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [282.848970] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [282.851340] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [282.851370] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [282.851584] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [282.851768] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [282.851770] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [282.856692] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [282.856697] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [282.859035] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [282.859343] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [282.859541] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [282.859544] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [282.864994] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [282.864999] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [282.867332] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [282.867596] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [282.867792] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [282.867795] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [282.872408] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [282.872412] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [282.874862] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [282.875131] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [282.875371] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [282.875375] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [282.880372] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [282.880379] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [282.882898] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [282.883269] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [282.883551] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [282.883555] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [282.888849] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [282.888855] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [282.891241] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [282.891597] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [282.891878] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [282.891882] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [282.895898] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [282.895902] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [282.898325] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [282.898605] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [282.898813] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [282.898816] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [282.902697] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [282.902701] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [282.905236] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [282.905510] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [282.905718] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [282.905721] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [282.909649] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [282.909653] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [282.911932] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [282.912222] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [282.912421] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [282.912424] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [282.916312] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [282.916316] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [282.918595] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [282.918854] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [282.919051] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [282.919054] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [282.922914] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [282.922918] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [282.925336] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [282.925594] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [282.925790] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [282.925793] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [282.929722] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [282.929726] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [282.932236] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [282.932496] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [282.932694] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [282.932696] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [282.936603] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [282.936607] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [282.938960] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [282.939260] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [282.939460] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [282.939463] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [282.943343] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [282.943347] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [282.945688] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [282.945945] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [282.946173] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [282.946176] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [282.950829] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [282.950834] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [282.953311] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [282.953573] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [282.953771] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [282.953773] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [282.957627] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [282.957631] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [282.959975] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [282.960294] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [282.960494] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [282.960497] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [282.964505] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [282.964510] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [282.966981] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [282.967318] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [282.967600] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [282.967603] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [282.972148] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [282.972152] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [282.974342] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [282.974605] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [282.974801] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [282.974803] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [282.979550] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [282.979555] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [282.981947] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [282.982221] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [282.982420] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [282.982423] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [282.987046] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [282.987051] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [282.989326] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [282.989589] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [282.989786] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [282.989789] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [282.994379] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [282.994385] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [282.996898] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [282.997264] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [282.997545] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [282.997549] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [283.002148] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [283.002152] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [283.004706] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [283.004970] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [283.005164] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [283.005166] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [283.009556] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [283.009562] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [283.011941] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [283.012283] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [283.012543] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [283.012547] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [283.017573] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [283.017579] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [283.020059] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [283.020513] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [283.020772] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [283.020776] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [283.024849] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [283.024853] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [283.027286] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [283.027536] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [283.027718] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [283.027720] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [283.031952] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [283.031958] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [283.034239] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [283.034571] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [283.034829] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [283.034833] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [283.039165] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [283.039170] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [283.041235] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [283.041480] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [283.041662] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [283.041664] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [283.045908] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [283.045912] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [283.048279] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [283.048525] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [283.048708] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [283.048711] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [283.052447] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [283.052451] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [283.054889] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [283.056018] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [283.056969] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [283.056984] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [283.069358] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [283.069366] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [283.071995] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [283.072612] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [283.073058] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [283.073064] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [283.078235] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [283.078242] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [283.080654] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [283.080936] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [283.081159] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [283.081162] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [283.087132] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [283.087137] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [283.089315] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [283.089573] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [283.089772] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [283.089774] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [283.094050] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [283.094054] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [283.096348] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [283.096621] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [283.096803] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [283.096806] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [283.101911] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [283.101915] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [283.104323] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [283.104577] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [283.104761] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [283.104763] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [283.109130] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [283.109134] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [283.111322] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [283.111566] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [283.111747] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [283.111750] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [283.116045] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [283.116049] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [283.118320] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [283.118564] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [283.118745] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [283.118747] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [283.122434] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [283.122439] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [283.124793] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [283.125608] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [283.126265] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [283.126274] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [283.136848] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [283.136856] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [283.139738] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [283.140564] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [283.141169] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [283.141178] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [283.152654] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [283.152662] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [283.155332] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [283.155701] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [283.155996] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [283.156000] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [283.162349] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [283.162355] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [283.164809] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [283.165101] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [283.165495] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [283.165499] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [283.169922] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [283.169927] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [283.172278] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1100MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [283.172542] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [283.172739] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [283.172742] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [283.176599] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [283.176603] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [283.178891] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [283.179132] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [283.179348] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [283.179351] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [283.182998] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [283.183002] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [283.184946] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1117MHz, before = 1117MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [283.185192] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [283.185407] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [283.185410] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [283.188928] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [283.188933] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [283.191324] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [283.191581] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [283.191774] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [283.191777] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [283.195295] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [283.195299] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [283.197343] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [283.197600] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [283.197793] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [283.197795] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [283.201437] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [283.201441] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [283.203863] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [283.204119] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [283.204351] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [283.204354] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [283.208253] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [283.208258] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [283.210737] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [283.210995] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [283.211188] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [283.211190] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [283.214726] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [283.214730] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [283.217282] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1050MHz, before = 1117MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [283.217543] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [283.217737] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [283.217739] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [283.221540] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [283.221544] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [283.224047] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [283.224313] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [283.224507] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [283.224509] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [283.228302] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [283.228306] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [283.230638] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [283.230880] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [283.231062] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [283.231064] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [283.234746] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [283.234750] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [283.237166] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [283.237442] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [283.237636] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [283.237639] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [283.241338] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [283.241342] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [283.243787] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [283.244043] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [283.244296] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [283.244300] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [283.248107] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [283.248111] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [283.250342] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1117MHz, before = 1117MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [283.250588] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [283.250770] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [283.250772] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [283.255642] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [283.255646] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [283.258010] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [283.258331] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [283.258517] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [283.258520] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [283.262936] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [283.262940] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [283.265198] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [283.265451] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [283.265633] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [283.265636] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [283.269080] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [283.269084] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [283.271350] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [283.271610] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [283.271803] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [283.271805] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [283.275532] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [283.275536] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [283.277977] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [283.278394] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [283.278583] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [283.278585] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [283.279296] igt_reset_nop: 66 resets

<6> [283.310452] i915: Running intel_hangcheck_live_selftests/igt_reset_nop_engine

<6> [283.811331] igt_reset_nop_engine(rcs0): 764 resets

<6> [284.313011] igt_reset_nop_engine(bcs0): 870 resets

<6> [284.813468] igt_reset_nop_engine(vcs0): 880 resets

<6> [285.314746] igt_reset_nop_engine(vecs0): 885 resets

<6> [285.336409] i915: Running intel_hangcheck_live_selftests/igt_reset_idle_engine

<6> [285.837329] rcs0: Completed 4030 idle resets

<6> [286.338400] bcs0: Completed 5559 idle resets

<6> [286.839376] vcs0: Completed 5495 idle resets

<6> [287.340338] vecs0: Completed 5632 idle resets

<6> [287.340354] i915: Running intel_hangcheck_live_selftests/igt_reset_active_engine

<6> [287.841354] rcs0: Completed 902 active resets

<6> [288.342483] bcs0: Completed 1118 active resets

<6> [288.843600] vcs0: Completed 1091 active resets

<6> [289.344322] vecs0: Completed 1033 active resets

<6> [289.376441] i915: Running intel_hangcheck_live_selftests/igt_reset_fail_engine

<6> [289.877297] igt_reset_fail_engine(rcs0): 1453 resets

<6> [290.378375] igt_reset_fail_engine(bcs0): 1736 resets

<6> [290.879698] igt_reset_fail_engine(vcs0): 1754 resets

<6> [291.380397] igt_reset_fail_engine(vecs0): 1545 resets

<6> [291.398345] i915: Running intel_hangcheck_live_selftests/igt_reset_engines

<6> [291.899329] i915_reset_engine(rcs0:idle): 1962 resets

<6> [292.400414] i915_reset_engine(bcs0:idle): 2746 resets

<6> [292.901264] i915_reset_engine(vcs0:idle): 3105 resets

<6> [293.402371] i915_reset_engine(vecs0:idle): 2965 resets

<6> [293.903698] i915_reset_engine(rcs0:active): 811 resets

<6> [294.404595] i915_reset_engine(bcs0:active): 955 resets

<6> [294.905638] i915_reset_engine(vcs0:active): 958 resets

<6> [295.406488] i915_reset_engine(vecs0:active): 966 resets

<6> [295.907308] i915_reset_engine(rcs0:others-idle): 4395 resets

<6> [296.409240] i915_reset_engine(bcs0:others-idle): 5217 resets

<6> [296.911249] i915_reset_engine(vcs0:others-idle): 5281 resets

<6> [297.413217] i915_reset_engine(vecs0:others-idle): 5490 resets

<6> [297.917317] i915_reset_engine(rcs0:others-active): 627 resets

<6> [298.419627] i915_reset_engine(bcs0:others-active): 689 resets

<6> [298.922614] i915_reset_engine(vcs0:others-active): 808 resets

<6> [299.425325] i915_reset_engine(vecs0:others-active): 745 resets

<6> [299.928746] i915_reset_engine(rcs0:others-priority): 667 resets

<6> [300.431284] i915_reset_engine(bcs0:others-priority): 620 resets

<6> [300.933882] i915_reset_engine(vcs0:others-priority): 692 resets

<6> [301.436265] i915_reset_engine(vecs0:others-priority): 789 resets

<6> [301.938257] i915_reset_engine(rcs0:self-priority): 847 resets

<6> [302.439253] i915_reset_engine(bcs0:self-priority): 909 resets

<6> [302.940311] i915_reset_engine(vcs0:self-priority): 851 resets

<6> [303.441252] i915_reset_engine(vecs0:self-priority): 890 resets

<6> [303.467438] i915: Running intel_hangcheck_live_selftests/igt_reset_engines_atomic

<7> [303.467452] intel_gt_set_wedged called from igt_force_reset+0xd/0xd0 [i915]

<6> [303.468970] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.468974] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.475343] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.476008] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.476218] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.476222] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [303.499089] intel_gt_set_wedged called from igt_force_reset+0xd/0xd0 [i915]

<6> [303.499836] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.499842] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.505360] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.505695] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.505890] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.505892] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.536428] i915: Running intel_hangcheck_live_selftests/igt_reset_queue

<6> [303.539071] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.539076] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.541319] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.541647] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.541899] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.541902] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.543455] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.543460] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.546085] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1117MHz, before = 1117MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.546446] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.546699] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.546702] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.547833] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.547840] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.550273] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1017MHz, before = 1017MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.550617] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.550855] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.550858] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.551989] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.551994] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.554239] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.554535] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.554773] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.554776] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.555896] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.555902] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.558248] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.558545] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.558781] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.558784] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.559928] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.559933] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.562278] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.562575] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.562812] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.562815] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.563945] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.563950] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.566252] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.566550] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.566788] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.566791] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.567917] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.567924] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.570333] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.570639] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.570875] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.570879] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.571985] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.571990] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.574235] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.574532] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.574769] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.574772] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.575897] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.575902] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.578251] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.578550] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.578787] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.578790] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.579919] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.579924] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.582284] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.582592] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.582830] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.582833] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.583964] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.583969] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.586348] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1100MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.586647] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.586857] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.586860] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.587873] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.587877] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.590305] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1083MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.590562] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.590760] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.590763] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.591697] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.591701] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.593885] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.594122] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.594367] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.594371] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.595226] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.595230] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.597714] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1100MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.597965] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.598158] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.598161] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.599078] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.599082] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.601325] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1083MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.601563] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.601744] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.601747] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.602672] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.602677] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.604970] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.605260] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.605524] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.605528] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.606322] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.606326] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.608745] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.608996] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.609189] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.609191] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.610110] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.610114] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.612258] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.612496] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.612678] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.612681] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.613588] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.613592] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.616000] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1100MHz, before = 1100MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.616282] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.616545] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.616549] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.617361] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.617365] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.619768] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.620004] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.620186] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.620189] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.621114] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.621118] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.623227] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.623464] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.623647] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.623649] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.624570] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.624573] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.626960] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.627230] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.627493] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.627497] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.628315] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.628319] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.630742] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.630978] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.631160] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.631163] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.632093] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.632097] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.634294] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.634529] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.634711] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.634714] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.635646] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.635650] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.637907] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.638145] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.638372] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.638376] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.639325] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.639329] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.641659] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.641911] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.642105] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.642107] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.642843] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.642849] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.645225] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1117MHz, before = 1117MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.645480] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.645673] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.645675] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.646368] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.646374] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.648648] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1017MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.648888] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.649070] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.649073] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.649781] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.649785] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.652122] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.652385] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.652577] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.652580] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.653288] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.653294] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.655289] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.655544] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.655726] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.655729] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.656438] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.656444] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.658797] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.659048] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.659258] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.659260] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.660007] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.660012] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.662309] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.662546] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.662729] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.662731] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.663485] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.663490] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.665824] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1117MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.666077] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.666284] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.666286] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.667034] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.667039] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.669305] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1083MHz, before = 1083MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.669546] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.669728] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.669730] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.670434] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.670438] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.672818] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 883MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.673076] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.673282] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.673285] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.674068] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.674072] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.677776] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 617MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.678094] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.678287] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.678290] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.679025] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.679029] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.681348] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.681586] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.681768] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.681770] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.682518] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.682524] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.684857] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1117MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.685109] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.685311] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.685313] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.686064] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.686068] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.688346] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 950MHz, before = 1083MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.688589] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.688770] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.688773] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.689468] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.689472] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.691868] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 883MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.692124] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.692331] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.692334] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.693082] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.693086] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.696631] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 617MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.696989] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.697180] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.697182] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.697886] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.697892] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.700296] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.700547] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.700738] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.700741] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.701437] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.701443] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.703773] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1117MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.704024] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.704230] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.704232] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.704958] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.704962] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.707218] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.707457] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.707640] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.707642] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.708333] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.708339] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.710642] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1117MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.710892] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.711086] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.711088] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.711790] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.711794] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.714135] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.714389] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.714572] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.714574] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.715266] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.715272] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.717297] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1117MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.717549] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.717742] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.717745] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.718446] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.718452] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.720850] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1083MHz, before = 1083MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.721102] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.721308] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.721310] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.721990] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.721996] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.724357] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 750MHz, before = 1017MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.724606] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.724789] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.724791] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.725494] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.725499] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.727880] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 617MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.728136] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.728330] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.728333] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.729073] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.729077] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.735351] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 5ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.735694] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.735874] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.735876] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.736559] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.736565] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.738907] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.739158] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.739360] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.739363] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.740094] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.740098] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.742351] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1117MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.742604] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.742797] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.742800] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.743481] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.743485] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.745778] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1083MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.746016] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.746198] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.746214] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.746925] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.746931] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.749311] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1017MHz, before = 1017MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.749567] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.749760] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.749762] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.750462] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.750468] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.752816] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.753066] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.753276] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.753280] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.754050] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.754054] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.756330] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.756568] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.756749] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.756752] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.757471] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.757475] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.759796] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1117MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.760048] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.760261] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.760264] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.761026] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.761030] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.763333] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1083MHz, before = 1083MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.763587] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.763779] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.763782] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.764481] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.764487] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.766885] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.767136] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.767341] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.767344] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.768030] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.768034] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.770337] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.770575] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.770758] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.770760] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.771494] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.771498] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.773849] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.774100] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.774305] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.774308] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.774980] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.774984] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.777295] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1133MHz, before = 1133MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.777535] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.777717] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.777720] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.778425] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.778429] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.780736] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1083MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.780974] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.781157] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.781160] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.781859] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.781865] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [303.784114] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 1ms, freq = 1150MHz, before = 1150MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [303.784386] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [303.784570] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [303.784573] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<6> [303.785248] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [303.785251] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [304.788697] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 0, freq = 350MHz, status = 0x00000020 [0x10/00]

<7> [305.792032] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 1, freq = 350MHz, status = 0x00000020 [0x10/00]

<7> [306.795393] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 2, freq = 350MHz, status = 0x00000020 [0x10/00]

<7> [307.798130] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 3, freq = 350MHz, status = 0x00000020 [0x10/00]

<7> [308.800518] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 4, freq = 350MHz, status = 0x00000020 [0x10/00]

<7> [309.803048] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 5, freq = 350MHz, status = 0x00000020 [0x10/00]

<7> [310.805482] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 6, freq = 350MHz, status = 0x00000020 [0x10/00]

<7> [311.807980] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 7, freq = 350MHz, status = 0x00000020 [0x10/00]

<7> [312.810704] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 8, freq = 350MHz, status = 0x00000020 [0x10/00]

<7> [313.813390] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 9, freq = 350MHz, status = 0x00000020 [0x10/00]

<7> [314.816057] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 10, freq = 350MHz, status = 0x00000020 [0x10/00]

<7> [315.817158] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 11, freq = 350MHz, status = 0x00000020 [0x10/00]

<7> [316.819536] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 12, freq = 350MHz, status = 0x00000020 [0x10/00]

<7> [317.822183] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 13, freq = 350MHz, status = 0x00000020 [0x10/00]

<7> [318.824594] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 14, freq = 350MHz, status = 0x00000020 [0x10/00]

<7> [319.042231] heartbeat rcs0 heartbeat {seqno:f6dd:2237, prio:2147483646} not ticking

<7> [319.042246] heartbeat Barriers?: no

<7> [319.042248] heartbeat Latency: 54us

<7> [319.042256] heartbeat Runtime: 5818ms

<7> [319.042258] heartbeat Forcewake: 0 domains, 0 active

<7> [319.042260] heartbeat Heartbeat: 3008 ms ago

<7> [319.042267] heartbeat Reset count: 16462 (global 135)

<7> [319.042271] heartbeat heartbeat_interval_ms: 2500 [default 2500]

<7> [319.042273] heartbeat max_busywait_duration_ns: 8000 [default 8000]

<7> [319.042275] heartbeat preempt_timeout_ms: 640 [default 640]

<7> [319.042277] heartbeat stop_timeout_ms: 100 [default 100]

<7> [319.042278] heartbeat timeslice_duration_ms: 1 [default 1]

<7> [319.042391] heartbeat MMIO base: 0x00002000

<7> [319.042485] heartbeat EL_STAT_HI: 0x00000000

<7> [319.042488] heartbeat EL_STAT_LO: 0x00000001

<7> [319.042491] heartbeat RING_START: 0x00000000

<7> [319.042493] heartbeat RING_HEAD: 0x00000000

<7> [319.042496] heartbeat RING_TAIL: 0x00000000

<7> [319.042499] heartbeat RING_CTL: 0x00000000

<7> [319.042503] heartbeat RING_MODE: 0x00000200 [idle]

<7> [319.042506] heartbeat RING_IMR: 0xffffffff

<7> [319.042508] heartbeat RING_ESR: 0x00000000

<7> [319.042511] heartbeat RING_EMR: 0xffffffff

<7> [319.042513] heartbeat RING_EIR: 0x00000000

<7> [319.042517] heartbeat ACTHD: 0x00000000_00000000

<7> [319.042520] heartbeat BBADDR: 0x00000000_00000000

<7> [319.042523] heartbeat DMA_FADDR: 0x00000000_00000000

<7> [319.042525] heartbeat IPEIR: 0x00000000

<7> [319.042528] heartbeat IPEHR: 0x00000000

<7> [319.042530] heartbeat Execlist tasklet queued? yes (disabled), preempt? inactive, timeslice? inactive

<7> [319.042534] heartbeat Execlist status: 0x00000001 00000000; CSB read:5, write:5, entries:6

<7> [319.042546] heartbeat Queue priority hint: -1024

<7> [319.042548] heartbeat R f6dd:2237* prio=2147483646 @ 3008ms: [i915]

<7> [319.042552] heartbeat R f95a:134* prio=0 @ 15261ms:

<7> [319.042555] heartbeat R f95a:136 prio=0 @ 15258ms:

<7> [319.042559] heartbeat [0000] 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a

<7> [319.042563] heartbeat [0040] ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff

<7> [319.042566] heartbeat [0060] ffffffff ffffffff ffffffff ffffffff 5a5a5a5a 5a5a5a5a 5a5a5a5a 00000005

<7> [319.042568] heartbeat [0080] 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a

<7> [319.042572] heartbeat [00c0] 5a5a5a5a 5a5a5a5a 00000000 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a

<7> [319.042574] heartbeat [00e0] 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a

<7> [319.042576] heartbeat [0100] 000008bc 00000000 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a

<7> [319.042578] heartbeat [0120] 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a 5a5a5a5a

<7> [319.042592] heartbeat IRQ: disabled

<6> [319.064557] i915 0000:00:02.0: [drm] GPU HANG: ecode 9:0:00000000

<6> [319.064560] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.

<6> [319.064562] Please file a _new_ bug report at https://gitlab.freedesktop.org/drm/intel/issues/new.

<6> [319.064564] Please see https://drm.pages.freedesktop.org/intel-docs/how-to-file-i915-bugs.html for details.

<6> [319.064565] drm/i915 developers can then reassign to the right component if it's not a kernel issue.

<6> [319.064567] The GPU crash dump is required to analyze GPU hangs, so please always attach it.

<6> [319.064568] GPU crash dump saved to /sys/class/drm/card0/error

<7> [319.825038] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 15, freq = 350MHz, status = 0x00000020 [0x10/00]

<7> [320.826448] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 16, freq = 350MHz, status = 0x00000020 [0x10/00]

<7> [321.827081] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 17, freq = 350MHz, status = 0x00000020 [0x10/00]

<7> [322.828036] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 18, freq = 350MHz, status = 0x00000020 [0x10/00]

<5> [323.782742] Fence expiration time out i915-0000:00:02.0::86!

<5> [323.786087] Fence expiration time out i915-0000:00:02.0::88!

<7> [323.829295] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: load still in progress, count = 19, freq = 350MHz, status = 0x00000020 [0x10/00]

<6> [323.829503] i915 0000:00:02.0: [drm] GT0: GUC: load failed: status = 0x00000020, time = 20043ms, freq = 350MHz, ret = -110

<6> [323.829506] i915 0000:00:02.0: [drm] GT0: GUC: load failed: status: Reset = 0, BootROM = 0x10, UKernel = 0x00, MIA = 0x00, Auth = 0x00

<7> [323.829509] i915 0000:00:02.0: [drm:__uc_init_hw [i915]] GT0: GuC fw load failed (-ETIMEDOUT) will reset and retry 2 more time(s)

<7> [323.835865] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [323.836193] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [323.836407] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [323.836411] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<3> [323.836569] Fence error status not zero [-4] after unrelated reset

<3> [323.869368] i915/intel_hangcheck_live_selftests: igt_reset_queue failed with error -22

<7> [323.869415] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [323.869670] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [323.869844] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [323.870015] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [323.870184] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [323.888263] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [323.936198] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<4> [323.985634] i915: probe of 0000:00:02.0 failed with error -22

<6> [326.733934] [IGT] i915_selftest: finished subtest hangcheck, FAIL

Results for igt@i915_selftest@live@hangcheck