Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 1.28-g814cd9883 (x86_64) (Linux: 6.8.0-rc2-linus-v6.8-rc2-g41bccc98fb79+ x86_64)
Out 
Using IGT_SRANDOM=1706490862 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.028s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.028s)
Dmesg
<6> [165.189149] Console: switching to colour dummy device 80x25
<6> [165.189380] [IGT] kms_force_connector_basic: executing
<7> [165.192632] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [165.194313] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [165.200957] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [165.202529] [drm:status_store] [CONNECTOR:194:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [165.202547] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [165.202562] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [165.203095] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected
<7> [165.203171] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [165.203182] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [165.203569] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected
<7> [165.203648] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [165.203658] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [165.204098] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected
<6> [165.204519] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [165.204835] [drm:status_store] [CONNECTOR:194:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [165.204847] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [165.204858] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [165.205426] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [165.205676] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [165.206286] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [165.206610] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [165.206623] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [165.206914] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [165.212682] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [165.212692] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [165.212876] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] status updated from disconnected to connected
<7> [165.212942] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] probed modes :
<7> [165.212947] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [165.212953] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [165.212958] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [165.212962] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [165.212967] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [165.213013] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [165.213018] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [165.213661] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [165.214017] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [165.214626] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [165.214974] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [165.214995] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [165.215292] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [165.220677] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [165.220687] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [165.220920] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] probed modes :
<7> [165.220927] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [165.220932] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [165.220937] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [165.220941] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [165.220945] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [165.221247] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:194:HDMI-A-1] EDID override set
<7> [165.221293] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [165.221304] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [165.221665] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:194:HDMI-A-1] ELD monitor IGT
<7> [165.221674] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:194:HDMI-A-1] ELD size 24, SAD count 0
<7> [165.221923] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [165.222267] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [165.222702] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [165.223019] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [165.223218] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [165.223229] [drm:drm_mode_prune_invalid] Not using 800x600 mode: STALE
<7> [165.223242] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [165.223250] [drm:drm_mode_prune_invalid] Not using 848x480 mode: STALE
<7> [165.223261] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] probed modes :
<7> [165.223268] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [165.223276] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [165.223283] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [165.223290] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [165.223297] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [165.223304] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [165.223564] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:194:HDMI-A-1] EDID override set
<7> [165.223606] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [165.223611] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [165.223795] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:194:HDMI-A-1] ELD monitor IGT
<7> [165.223801] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:194:HDMI-A-1] ELD size 24, SAD count 0
<7> [165.223805] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:194:HDMI-A-1] EDID changed, epoch counter 4
<7> [165.224100] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [165.224355] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [165.224880] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [165.225146] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [165.225319] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [165.225329] [drm:drm_mode_prune_invalid] Not using 1400x1050 mode: STALE
<7> [165.225341] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] probed modes :
<7> [165.225347] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [165.225354] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [165.225361] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [165.225368] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [165.225374] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [165.225553] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:194:HDMI-A-1] EDID override reset
<7> [165.225578] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [165.225582] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [165.225996] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [165.226273] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [165.226795] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [165.227059] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [165.227075] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [165.227303] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [165.231923] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [165.231931] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [165.232056] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:194:HDMI-A-1] EDID changed, epoch counter 5
<7> [165.232116] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [165.232122] [drm:drm_mode_prune_invalid] Not using 1920x1080 mode: STALE
<7> [165.232128] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [165.232132] [drm:drm_mode_prune_invalid] Not using 1280x720 mode: STALE
<7> [165.232138] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] probed modes :
<7> [165.232141] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [165.232145] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [165.232148] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [165.232151] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [165.232154] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [165.232312] [drm:status_store] [CONNECTOR:194:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [165.232318] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [165.232323] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [165.232507] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] status updated from connected to disconnected
<7> [165.232521] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected
<7> [165.232664] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [165.232670] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [165.232900] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected
<6> [165.233165] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [165.233347] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [165.234281] [drm:status_store] [CONNECTOR:185:eDP-1] force updated from 0 to 0 or reprobing
<7> [165.234289] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1]
<7> [165.234295] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1]
<7> [165.235257] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [165.236034] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [165.236193] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [165.236343] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [165.236496] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [165.236668] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [165.236677] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [165.236681] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor
<7> [165.236686] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0
<7> [165.236706] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no
<7> [165.236868] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [165.237751] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [165.237903] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [165.238688] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1] probed modes :
<7> [165.238694] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [165.238700] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [165.238764] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1]
<7> [165.238771] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1]
<7> [165.239620] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [165.240343] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [165.240498] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [165.240644] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [165.240806] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [165.240970] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [165.240978] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [165.240982] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor
<7> [165.240985] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0
<7> [165.241002] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no
<7> [165.241146] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [165.241962] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [165.242108] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [165.242871] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1] probed modes :
<7> [165.242877] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [165.242882] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [165.243018] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:185:eDP-1] EDID override reset
<7> [165.243040] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1]
<7> [165.243045] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1]
<7> [165.243889] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [165.244550] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [165.244690] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [165.244905] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [165.245044] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [165.245206] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [165.245212] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [165.245216] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor
<7> [165.245220] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0
<7> [165.245237] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no
<7> [165.245376] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [165.246218] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [165.246374] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [165.247144] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1] probed modes :
<7> [165.247149] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [165.247154] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [165.247328] [drm:status_store] [CONNECTOR:194:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [165.247334] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [165.247340] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [165.247570] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected
<7> [165.247613] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [165.247618] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [165.247823] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected
<7> [165.247931] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:194:HDMI-A-1] EDID override reset
<7> [165.247950] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [165.247955] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [165.248141] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected
<7> [165.248244] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:203:DP-1] EDID override reset
<7> [165.248261] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1]
<7> [165.248266] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:203:DP-1]
<7> [165.248501] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1] disconnected
<7> [165.248602] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:212:DP-2] EDID override reset
<7> [165.248619] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2]
<7> [165.248623] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:212:DP-2]
<7> [165.248850] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2] disconnected
<6> [165.249327] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [165.249445] [drm:status_store] [CONNECTOR:194:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [165.249451] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [165.249456] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [165.249669] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected
<7> [165.249713] [drm:status_store] [CONNECTOR:185:eDP-1] force updated from 0 to 0 or reprobing
<7> [165.249717] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1]
<7> [165.249722] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1]
<7> [165.250601] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [165.251299] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [165.251436] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [165.251576] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [165.251718] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [165.251911] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [165.251917] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [165.251922] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor
<7> [165.251926] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0
<7> [165.251944] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no
<7> [165.252082] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [165.252939] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [165.253082] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [165.253872] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1] probed modes :
<7> [165.253877] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [165.253883] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [165.254126] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [165.274119] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0]
<7> [165.274127] [drm:drm_client_modeset_probe]
<7> [165.274159] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1]
<7> [165.274166] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1]
<7> [165.275089] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [165.275795] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [165.275944] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [165.276092] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [165.276235] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [165.276397] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [165.276416] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [165.276420] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor
<7> [165.276424] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0
<7> [165.276444] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no
<7> [165.276583] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [165.277472] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [165.277616] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [165.278409] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1] probed modes :
<7> [165.278415] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [165.278421] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [165.278427] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1]
<7> [165.278432] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [165.278637] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:194:HDMI-A-1] disconnected
<7> [165.278643] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1]
<7> [165.278648] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:203:DP-1]
<7> [165.278884] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:203:DP-1] disconnected
<7> [165.278890] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2]
<7> [165.278894] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:212:DP-2]
<7> [165.279110] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:212:DP-2] disconnected
<7> [165.279115] [drm:drm_client_modeset_probe] connector 185 enabled? yes
<7> [165.279119] [drm:drm_client_modeset_probe] connector 194 enabled? no
<7> [165.279122] [drm:drm_client_modeset_probe] connector 203 enabled? no
<7> [165.279124] [drm:drm_client_modeset_probe] connector 212 enabled? no
<7> [165.279151] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [165.279161] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 185
<7> [165.279165] [drm:drm_client_modeset_probe] looking for preferred mode on connector 185 0
<7> [165.279168] [drm:drm_client_modeset_probe] found mode 3840x2160
<7> [165.279170] [drm:drm_client_modeset_probe] picking CRTCs for 3840x2160 config
<7> [165.279186] [drm:drm_client_modeset_probe] desired mode 3840x2160 set on crtc 80 (0,0)
<6> [165.308195] Console: switching to colour frame buffer device 480x135
Created at 2024-01-29 02:30:05