igt@i915_pm_rpm@module-reload on fi-kbl-x1275@linus-v6.8-rc1 Test details

Detail	Value
Duration	26.82 seconds
Igt-Version	IGT-Version: 1.28-gfa4ee7909 (x86_64) (Linux: 6.8.0-rc1-linus-v6.8-rc1-g6613476e225e+ x86_64)
Out	Using IGT_SRANDOM=1705876013 for randomisation Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: 0000:00:02.0@ffff888147f734b0 has 1/1 users at track_intel_runtime_pm_wakeref.part.0+0x30/0x60 [i915] __intel_display_power_put_async+0x3d/0x160 [i915] intel_atomic_commit_tail+0xaef/0xf80 [i915] intel_atomic_commit+0x321/0x370 [i915] drm_atomic_commit+0x95/0xc0 drm_atomic_helper_set_config+0x77/0xc0 drm_mode_setcrtc+0x202/0x710 drm_ioctl_kernel+0xab/0x100 drm_ioctl+0x223/0x430 __x64_sys_ioctl+0x7c/0xb0 do_syscall_64+0x72/0x140 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Starting subtest: module-reload Reloading i915 with disable_display=1 mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] Reloading i915 with mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: 0000:00:02.0@ffff888164eab4b0 has 1/1 users at track_intel_runtime_pm_wakeref.part.0+0x30/0x60 [i915] __intel_display_power_put_async+0x3d/0x160 [i915] intel_dp_aux_xfer+0x4c9/0x6d0 [i915] intel_dp_aux_transfer+0x1dc/0x2a0 [i915] drm_dp_dpcd_access+0x6d/0x130 [drm_display_helper] drm_dp_dpcd_read+0xeb/0x100 [drm_display_helper] drm_dp_read_sink_count+0x2c/0x80 [drm_display_helper] intel_dp_get_dpcd+0x9c/0xc0 [i915] intel_dp_detect+0xe4/0x680 [i915] drm_helper_probe_detect_ctx+0x45/0x100 intel_hotplug_detect_connector+0x3e/0x100 [i915] i915_hpd_poll_init_work+0x178/0x220 [i915] process_scheduled_works+0x2de/0x530 worker_thread+0x18c/0x350 kthread+0x100/0x130 ret_from_fork+0x2f/0x50 Subtest module-reload: SUCCESS (26.819s)
Err	Starting subtest: module-reload Subtest module-reload: SUCCESS (26.819s)
Dmesg	<6> [144.884070] [IGT] i915_pm_rpm: executing <7> [144.891752] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [144.892455] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [144.892462] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [144.892785] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [144.892851] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [144.892856] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [144.893052] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [144.894933] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [144.896107] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [144.896924] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [144.896983] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [144.896987] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [144.897642] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [144.897847] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [144.898306] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [144.898484] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [144.898488] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [144.898612] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [144.902680] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [144.902686] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [144.902820] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [144.906464] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [144.906470] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [144.906655] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [144.907099] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [144.907105] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [144.908435] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [144.909649] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [144.910509] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [144.910960] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [144.910965] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [144.911381] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [144.911506] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [144.912003] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [144.912213] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [144.912220] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [144.912345] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [144.916544] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [144.916549] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [144.916698] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [144.916996] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [144.917001] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [144.917164] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [144.917179] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [144.917183] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [144.918402] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [144.919571] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [144.920428] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [144.920448] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [144.920452] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [144.920943] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [144.921060] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [144.921428] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [144.921577] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [144.921581] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [144.921739] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [144.925800] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [144.925805] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [144.925932] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [145.025652] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [145.025825] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [145.025961] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [145.026092] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [145.026692] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [155.976969] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [155.983034] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [156.007669] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [156.014866] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [156.015503] [drm:drm_mode_setcrtc] [CRTC:51:pipe A] <7> [156.015721] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [156.015965] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [156.016576] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [156.017762] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [156.018224] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [156.018658] [drm:drm_mode_setcrtc] [CRTC:72:pipe B] <7> [156.018619] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [156.020708] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [156.021659] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [156.022559] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [156.023284] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [156.023406] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [156.023777] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [156.023935] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [156.023940] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [156.024053] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [156.028106] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [156.028111] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [156.028392] [drm:drm_mode_setcrtc] [CRTC:93:pipe C] <7> [156.137776] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [156.138085] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [156.138335] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [156.138578] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [156.139311] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [156.140299] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [156.144583] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [156.231172] [IGT] i915_pm_rpm: starting subtest module-reload <7> [156.349768] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [156.357119] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [156.357395] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [156.357860] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [156.358476] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [156.359125] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [156.359692] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [156.360033] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [156.360369] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [156.360718] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [156.361080] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [156.361481] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [156.363638] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [156.364491] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [156.365196] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [156.365753] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [156.365962] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [156.366430] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [156.366699] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [156.366708] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [156.366910] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [156.371188] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [156.371192] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [156.390453] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [156.434969] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <6> [156.668379] [IGT] Reloading i915 w/o display <7> [156.821314] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [156.821547] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [156.821772] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH <7> [156.821988] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [156.822207] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [156.822349] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz <7> [156.822947] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [156.823072] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [156.823203] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M <6> [156.823314] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [156.823318] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [156.823539] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [156.823554] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047 <7> [156.823752] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K <7> [156.824082] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018 <7> [156.824250] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [156.824396] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [156.824538] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [156.824703] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [156.828644] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [156.828804] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [156.828954] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [156.829124] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [156.829319] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [156.829475] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [156.829620] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [156.829779] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [156.829887] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [156.829990] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [156.830091] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [156.830191] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [156.830294] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [156.830396] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [156.830986] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [156.831169] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196 <7> [156.831329] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [156.831487] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [156.831691] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [156.831886] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [156.832043] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812) <7> [156.832200] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34) <7> [156.832369] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [156.832527] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [156.832734] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [156.832927] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [156.833086] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [156.833274] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [156.833452] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6 <7> [156.833637] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [156.833846] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [156.834006] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [156.834163] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [156.834319] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [156.834474] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [156.834654] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3 <7> [156.834859] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [156.835014] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3 <7> [156.835167] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [156.835333] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [156.835521] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [156.835696] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [156.835886] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [156.836450] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [156.836618] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [156.836821] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [156.837053] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [156.837235] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [156.837389] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [156.837555] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [156.837790] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [156.837979] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [156.838135] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [156.838291] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [156.838480] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <7> [156.839097] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [156.839257] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [156.839409] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [156.839560] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [156.839953] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <6> [156.840099] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [156.840391] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [156.840548] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [156.840766] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [156.840929] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [156.841073] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [156.841217] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [156.841363] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [156.841509] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [156.841685] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [156.841848] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [156.843098] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [156.844780] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [156.845123] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] Using AUX CH A (VBT) <7> [156.845360] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A] <7> [156.847659] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [156.847822] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [156.847993] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [156.848156] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static <7> [156.848319] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [156.848509] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [156.848772] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [156.848951] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [156.849106] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [156.849260] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0 <7> [156.849416] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1 <7> [156.849643] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0 <7> [156.849896] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [156.850036] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [156.850173] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [156.850309] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [156.850445] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [156.850720] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [156.851068] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on <7> [156.851235] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [156.851455] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [156.851690] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [156.851937] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [156.852117] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [157.069278] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.079600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.090602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.101602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.112601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.123601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.134602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.145602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.156601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.167602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.178600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.189602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.200600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.211602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.222600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.233603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.244600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.255602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.266601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.277603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.288602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.299601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.310601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.321603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.332600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.343600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.354601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.365602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.376600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.387600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.398601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.409602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [157.409831] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <6> [157.409847] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP <7> [157.409909] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off <7> [157.410117] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [157.410375] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] Using AUX CH B (VBT) <7> [157.410539] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B] <7> [157.421603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.432600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.443602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.454601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.465602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.476600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.487602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.498601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.509603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.520601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.531602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.542601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.553602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.564601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.575601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.586600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.597602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.608600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.619601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.630600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.641602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.652600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.663602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.674601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.685602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.696600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.707602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.718601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.729602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.740600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.751602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.762601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.762815] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX B/DDI B/PHY B: Too many retries, giving up. First error: -110 <7> [157.762827] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel <7> [157.773603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.784601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.795601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.806601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.817602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.828600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.839601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.850601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.861602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.872600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.883601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.894600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.905602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.916602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.927600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.938600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.949602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.960601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.971602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.982601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [157.993602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.004602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.015601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.026602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.037603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.048601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.059601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.070601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.081602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.092601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.103601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.114601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [158.114816] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX B/DDI B/PHY B: Too many retries, giving up. First error: -110 <7> [158.114828] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [158.114991] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DDI C/PHY C] Using AUX CH C (VBT) <7> [158.115153] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C] <7> [158.116263] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel <7> [158.117270] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [158.117427] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C] <7> [158.117647] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:106:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [158.118019] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [158.118242] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [158.118459] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [158.118636] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [158.118830] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [158.119008] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [158.119176] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [158.119398] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [158.119585] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [158.119780] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [158.119969] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [158.120133] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [158.120299] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [158.120448] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A <7> [158.120604] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B <7> [158.120771] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C <7> [158.120937] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A <7> [158.121085] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A <7> [158.121234] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B <7> [158.121383] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C <7> [158.121550] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [158.121728] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [158.121920] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [158.122089] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [158.122301] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled <7> [158.122490] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled <7> [158.122735] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled <7> [158.122966] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [158.123198] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [158.123353] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [158.123530] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [158.123694] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [158.123869] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [158.124016] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [158.124165] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [158.124324] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [158.124474] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [158.124633] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [158.124802] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [158.125015] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [158.125172] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [158.125328] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [158.125484] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [158.125649] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [158.125817] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [158.125964] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [158.126144] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [158.126265] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [158.126408] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [158.126559] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 6 GT workarounds on global <7> [158.128703] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [158.128855] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [158.128996] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 14 context workarounds on rcs'0 <7> [158.141540] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [158.141693] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [158.141816] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [158.141936] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [158.142215] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [158.142424] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [158.142579] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [158.142744] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [158.142979] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [158.143218] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [158.147821] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [158.148865] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event <7> [158.149445] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [158.150453] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event <7> [158.150815] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event <6> [158.150871] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0 <7> [158.152339] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected <6> [158.165778] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [158.167965] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 <7> [158.169577] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [158.170336] i915 display info: display version: 9 <7> [158.170339] i915 display info: cursor_needs_physical: no <7> [158.170341] i915 display info: has_cdclk_crawl: no <7> [158.170342] i915 display info: has_cdclk_squash: no <7> [158.170344] i915 display info: has_ddi: yes <7> [158.170345] i915 display info: has_dp_mst: yes <7> [158.170347] i915 display info: has_dsb: no <7> [158.170348] i915 display info: has_fpga_dbg: yes <7> [158.170347] [drm:drm_client_modeset_probe] <7> [158.170350] i915 display info: has_gmch: no <7> [158.170351] i915 display info: has_hotplug: yes <7> [158.170353] i915 display info: has_hti: no <7> [158.170354] i915 display info: has_ipc: yes <7> [158.170356] i915 display info: has_overlay: no <7> [158.170357] i915 display info: has_psr: yes <7> [158.170358] i915 display info: has_psr_hw_tracking: yes <7> [158.170360] i915 display info: overlay_needs_physical: no <7> [158.170361] i915 display info: supports_tv: no <7> [158.170363] i915 display info: has_hdcp: yes <7> [158.170364] i915 display info: has_dmc: yes <7> [158.170365] i915 display info: has_dsc: no <7> [158.170383] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [158.170368] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [158.170391] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [158.170565] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] status updated from unknown to disconnected <7> [158.170580] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [158.170588] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [158.170548] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [158.170612] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [158.170804] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] status updated from unknown to disconnected <7> [158.170812] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [158.170816] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [158.170763] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [158.170821] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [158.170965] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected <7> [158.170972] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [158.170975] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [158.170978] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [158.170981] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [158.170983] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [158.171008] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [158.171016] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [158.171030] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [158.171037] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [158.171000] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [158.171587] [drm:drm_client_modeset_probe] <7> [158.171644] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [158.171652] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [158.171863] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [158.171868] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [158.171777] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [158.171872] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [158.172003] i915 device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9 <7> [158.172007] i915 device info: graphics version: 9 <7> [158.172010] i915 device info: media version: 9 <7> [158.172012] i915 device info: graphics stepping: F0 <7> [158.172014] i915 device info: media stepping: F0 <7> [158.172016] i915 device info: display stepping: C0 <7> [158.172018] i915 device info: base die stepping: <7> [158.172021] i915 device info: gt: 2 <7> [158.172023] i915 device info: memory-regions: 0x21 <7> [158.172025] i915 device info: page-sizes: 0x11000 <7> [158.172027] i915 device info: platform: KABYLAKE <7> [158.172029] i915 device info: ppgtt-size: 48 <7> [158.172032] i915 device info: ppgtt-type: 2 <7> [158.172034] i915 device info: dma_mask_size: 39 <7> [158.172036] i915 device info: is_mobile: no <7> [158.172038] i915 device info: is_lp: no <7> [158.172041] i915 device info: require_force_probe: no <7> [158.172043] i915 device info: is_dgfx: no <7> [158.172045] i915 device info: has_64bit_reloc: yes <7> [158.172047] i915 device info: has_64k_pages: no <7> [158.172049] i915 device info: gpu_reset_clobbers_display: no <7> [158.172051] i915 device info: has_reset_engine: yes <7> [158.172054] i915 device info: has_3d_pipeline: yes <7> [158.172056] i915 device info: has_flat_ccs: no <7> [158.172058] i915 device info: has_global_mocs: no <7> [158.172060] i915 device info: has_gmd_id: no <7> [158.172062] i915 device info: has_gt_uc: yes <7> [158.172064] i915 device info: has_heci_pxp: no <7> [158.172067] i915 device info: has_heci_gscfi: no <7> [158.172069] i915 device info: has_guc_deprivilege: no <7> [158.172077] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [158.172082] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [158.172085] i915 device info: has_guc_tlb_invalidation: no <7> [158.172087] i915 device info: has_l3_ccs_read: no <7> [158.172090] i915 device info: has_l3_dpf: no <7> [158.172093] i915 device info: has_llc: yes <7> [158.172095] i915 device info: has_logical_ring_contexts: yes <7> [158.172098] i915 device info: has_logical_ring_elsq: no <7> [158.172100] i915 device info: has_media_ratio_mode: no <7> [158.172103] i915 device info: has_mslice_steering: no <7> [158.172106] i915 device info: has_oa_bpc_reporting: no <7> [158.172108] i915 device info: has_oa_slice_contrib_limits: no <7> [158.172111] i915 device info: has_oam: no <7> [158.172114] i915 device info: has_one_eu_per_fuse_bit: no <7> [158.172116] i915 device info: has_pxp: no <7> [158.172119] i915 device info: has_rc6: yes <7> [158.172121] i915 device info: has_rc6p: no <7> [158.172124] i915 device info: has_rps: yes <7> [158.172126] i915 device info: has_runtime_pm: yes <7> [158.172129] i915 device info: has_snoop: no <7> [158.172131] i915 device info: has_coherent_ggtt: yes <7> [158.172134] i915 device info: tuning_thread_rr_after_dep: no <7> [158.172137] i915 device info: unfenced_needs_alignment: no <7> [158.172139] i915 device info: hws_needs_physical: no <7> [158.172142] i915 device info: has_pooled_eu: no <7> [158.172144] i915 device info: rawclk rate: 24000 kHz <7> [158.172147] i915 device info: iommu: enabled <7> [158.172150] i915 device info: available engines: 40403 <7> [158.172153] i915 device info: slice total: 1, mask=0001 <7> [158.172156] i915 device info: subslice total: 3 <7> [158.172159] i915 device info: slice0: 3 subslices, mask=00000007 <7> [158.172162] i915 device info: slice1: 0 subslices, mask=00000000 <7> [158.172165] i915 device info: slice2: 0 subslices, mask=00000000 <7> [158.172168] i915 device info: EU total: 24 <7> [158.172170] i915 device info: EU per subslice: 8 <7> [158.172173] i915 device info: has slice power gating: no <7> [158.172175] i915 device info: has subslice power gating: no <7> [158.172178] i915 device info: has EU power gating: yes <6> [158.172181] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [158.172184] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [158.172186] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [158.172090] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [158.172302] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [158.172308] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [158.172313] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [158.172317] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [158.172321] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [158.172359] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [158.172370] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [158.172390] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [158.172399] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [158.177703] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [158.322266] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [158.323186] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [158.323671] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [158.324217] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [158.325139] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [168.793787] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [168.798669] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [169.239822] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [169.249686] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [169.250762] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [169.251523] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [169.252033] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [169.252484] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [169.252956] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [169.253556] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [169.256584] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [169.455743] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [169.463179] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [169.463536] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [169.464088] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [169.464837] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [169.465573] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [169.466176] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [169.466522] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [169.466882] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [169.467291] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [169.467675] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [169.468521] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [169.468766] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [169.495493] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [169.550668] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <6> [169.767404] [IGT] Reloading i915 as normal <7> [169.903722] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [169.903966] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [169.904135] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH <7> [169.904288] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [169.904488] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [169.904701] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz <7> [169.905388] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [169.905523] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [169.905656] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M <6> [169.905779] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [169.905783] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [169.906010] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [169.906026] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047 <7> [169.906177] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K <7> [169.906493] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018 <7> [169.906719] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [169.906891] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [169.907043] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [169.907195] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [169.911360] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [169.911521] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [169.911742] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [169.911913] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [169.912126] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [169.912237] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [169.912340] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [169.912444] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [169.912551] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [169.912659] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [169.912792] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [169.912894] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [169.912994] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [169.913099] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [169.913765] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [169.913943] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196 <7> [169.914102] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [169.914260] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [169.914420] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [169.914578] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [169.914747] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812) <7> [169.914931] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34) <7> [169.915089] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [169.915267] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [169.915430] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [169.915644] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [169.915873] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [169.916026] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [169.916181] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6 <7> [169.916341] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [169.916500] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [169.916664] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [169.916841] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [169.916996] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [169.917150] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [169.917302] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3 <7> [169.917452] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [169.917614] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3 <7> [169.917792] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [169.917956] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [169.918144] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [169.918315] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [169.918471] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [169.919003] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [169.919162] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [169.919353] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [169.919613] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [169.919833] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [169.919986] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [169.920149] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [169.920338] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [169.920496] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [169.920659] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [169.920836] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [169.921024] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <7> [169.921620] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [169.921846] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [169.922065] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [169.922133] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [169.922296] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [169.922787] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <6> [169.923088] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [169.922980] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [169.923204] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [169.923384] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [169.923527] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [169.923781] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [169.923942] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [169.924088] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [169.924233] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [169.924378] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [169.925649] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [169.926584] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [169.926864] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] Using AUX CH A (VBT) <7> [169.927061] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A] <7> [169.929660] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [169.929840] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [169.929996] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [169.930165] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static <7> [169.930345] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [169.930518] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [169.930720] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [169.930948] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [169.931102] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [169.931256] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0 <7> [169.931411] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1 <7> [169.931642] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0 <7> [169.931871] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [169.932012] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [169.932152] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [169.932288] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [169.932425] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [169.932712] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [169.933063] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on <7> [169.933230] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [169.933439] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [169.933670] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [169.933884] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [169.934070] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [170.148603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.159603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.170606] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.181603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.192603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.203604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.214605] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.225602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.236603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.247604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.258605] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.269602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.280603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.291605] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.302603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.313603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.324604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.335604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.346603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.357603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.368604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.379604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.390603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.401603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.412604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.423604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.434603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.445603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.456603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.467605] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.478603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.489603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [170.489840] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <6> [170.489853] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP <7> [170.489915] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off <7> [170.490119] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [170.490371] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] Using AUX CH B (VBT) <7> [170.490531] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B] <7> [170.501604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.512603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.523605] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.534603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.545699] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.556604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.567604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.578603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.589604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.600603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.611604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.622603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.633603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.644603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.655605] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.666604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.677603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.688603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.699605] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.710603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.721603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.732603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.743605] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.754603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.765603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.776603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.787605] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.798603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.809603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.820604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.831605] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.842602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.842812] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX B/DDI B/PHY B: Too many retries, giving up. First error: -110 <7> [170.842825] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel <7> [170.853603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.864604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.875604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.886603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.897603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.908604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.919604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.930603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.941603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.952604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.963604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.974603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.985603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [170.996604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.007605] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.018605] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.029603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.040603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.051604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.062603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.073603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.084604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.095605] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.106603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.117603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.128603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.139604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.150603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.161603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.172604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.183604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.194603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f) <7> [171.194830] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX B/DDI B/PHY B: Too many retries, giving up. First error: -110 <7> [171.194842] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [171.195001] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DDI C/PHY C] Using AUX CH C (VBT) <7> [171.195157] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C] <7> [171.196255] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel <7> [171.197214] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [171.197387] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C] <7> [171.197526] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:106:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [171.197927] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [171.198147] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [171.198366] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [171.198529] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [171.198703] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [171.198904] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [171.199069] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [171.199286] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [171.199467] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [171.199643] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [171.199849] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [171.200014] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [171.200180] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [171.200328] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A <7> [171.200478] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B <7> [171.200649] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C <7> [171.200865] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A <7> [171.201010] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A <7> [171.201158] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B <7> [171.201306] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C <7> [171.201473] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [171.201671] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [171.201891] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [171.202060] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [171.202265] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled <7> [171.202444] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled <7> [171.202668] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled <7> [171.202854] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [171.203003] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [171.203185] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [171.203367] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [171.203526] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [171.203685] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [171.203834] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [171.203982] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [171.204141] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [171.204292] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [171.204442] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [171.204590] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [171.204804] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [171.204963] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [171.205118] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [171.205274] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [171.205430] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [171.205579] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [171.205732] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [171.205911] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [171.206032] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [171.206161] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [171.206311] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 6 GT workarounds on global <7> [171.208334] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [171.208485] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [171.208640] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 14 context workarounds on rcs'0 <7> [171.219861] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [171.220005] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [171.220129] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [171.220249] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [171.220514] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [171.220859] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [171.221027] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [171.221172] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [171.221315] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [171.221478] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [171.225156] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [171.226138] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event <7> [171.226719] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [171.227640] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event <7> [171.228243] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event <6> [171.228308] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0 <7> [171.230459] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected <6> [171.243428] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [171.245565] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8 <7> [171.246175] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [171.247297] i915 display info: display version: 9 <7> [171.247297] [drm:drm_client_modeset_probe] <7> [171.247302] i915 display info: cursor_needs_physical: no <7> [171.247305] i915 display info: has_cdclk_crawl: no <7> [171.247307] i915 display info: has_cdclk_squash: no <7> [171.247310] i915 display info: has_ddi: yes <7> [171.247312] i915 display info: has_dp_mst: yes <7> [171.247315] i915 display info: has_dsb: no <7> [171.247317] i915 display info: has_fpga_dbg: yes <7> [171.247319] i915 display info: has_gmch: no <7> [171.247322] i915 display info: has_hotplug: yes <7> [171.247325] i915 display info: has_hti: no <7> [171.247327] i915 display info: has_ipc: yes <7> [171.247330] i915 display info: has_overlay: no <7> [171.247330] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [171.247332] i915 display info: has_psr: yes <7> [171.247335] i915 display info: has_psr_hw_tracking: yes <7> [171.247338] i915 display info: overlay_needs_physical: no <7> [171.247341] i915 display info: supports_tv: no <7> [171.247343] i915 display info: has_hdcp: yes <7> [171.247345] i915 display info: has_dmc: yes <7> [171.247348] i915 display info: has_dsc: no <7> [171.247345] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [171.247352] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [171.247619] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [171.247856] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [171.248085] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [171.248491] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] status updated from unknown to disconnected <7> [171.248508] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [171.248516] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [171.248523] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [171.248967] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [171.249194] i915 device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9 <7> [171.249198] i915 device info: graphics version: 9 <7> [171.249201] i915 device info: media version: 9 <7> [171.249204] i915 device info: graphics stepping: F0 <7> [171.249206] i915 device info: media stepping: F0 <7> [171.249209] i915 device info: display stepping: C0 <7> [171.249211] i915 device info: base die stepping: <7> [171.249214] i915 device info: gt: 2 <7> [171.249216] i915 device info: memory-regions: 0x21 <7> [171.249219] i915 device info: page-sizes: 0x11000 <7> [171.249222] i915 device info: platform: KABYLAKE <7> [171.249224] i915 device info: ppgtt-size: 48 <7> [171.249227] i915 device info: ppgtt-type: 2 <7> [171.249229] i915 device info: dma_mask_size: 39 <7> [171.249232] i915 device info: is_mobile: no <7> [171.249234] i915 device info: is_lp: no <7> [171.249237] i915 device info: require_force_probe: no <7> [171.249239] i915 device info: is_dgfx: no <7> [171.249242] i915 device info: has_64bit_reloc: yes <7> [171.249244] i915 device info: has_64k_pages: no <7> [171.249246] i915 device info: gpu_reset_clobbers_display: no <7> [171.249249] i915 device info: has_reset_engine: yes <7> [171.249251] i915 device info: has_3d_pipeline: yes <7> [171.249254] i915 device info: has_flat_ccs: no <7> [171.249256] i915 device info: has_global_mocs: no <7> [171.249259] i915 device info: has_gmd_id: no <7> [171.249261] i915 device info: has_gt_uc: yes <7> [171.249263] i915 device info: has_heci_pxp: no <7> [171.249265] i915 device info: has_heci_gscfi: no <7> [171.249268] i915 device info: has_guc_deprivilege: no <7> [171.249270] i915 device info: has_guc_tlb_invalidation: no <7> [171.249273] i915 device info: has_l3_ccs_read: no <7> [171.249275] i915 device info: has_l3_dpf: no <7> [171.249277] i915 device info: has_llc: yes <7> [171.249280] i915 device info: has_logical_ring_contexts: yes <7> [171.249282] i915 device info: has_logical_ring_elsq: no <7> [171.249285] i915 device info: has_media_ratio_mode: no <7> [171.249287] i915 device info: has_mslice_steering: no <7> [171.249289] i915 device info: has_oa_bpc_reporting: no <7> [171.249291] i915 device info: has_oa_slice_contrib_limits: no <7> [171.249292] i915 device info: has_oam: no <7> [171.249294] i915 device info: has_one_eu_per_fuse_bit: no <7> [171.249296] i915 device info: has_pxp: no <7> [171.249298] i915 device info: has_rc6: yes <7> [171.249300] i915 device info: has_rc6p: no <7> [171.249302] i915 device info: has_rps: yes <7> [171.249305] i915 device info: has_runtime_pm: yes <7> [171.249307] i915 device info: has_snoop: no <7> [171.249309] i915 device info: has_coherent_ggtt: yes <7> [171.249311] i915 device info: tuning_thread_rr_after_dep: no <7> [171.249313] i915 device info: unfenced_needs_alignment: no <7> [171.249315] i915 device info: hws_needs_physical: no <7> [171.249317] i915 device info: has_pooled_eu: no <7> [171.249319] i915 device info: rawclk rate: 24000 kHz <7> [171.249322] i915 device info: iommu: enabled <7> [171.249325] i915 device info: available engines: 40403 <7> [171.249327] i915 device info: slice total: 1, mask=0001 <7> [171.249330] i915 device info: subslice total: 3 <7> [171.249332] i915 device info: slice0: 3 subslices, mask=00000007 <7> [171.249335] i915 device info: slice1: 0 subslices, mask=00000000 <7> [171.249338] i915 device info: slice2: 0 subslices, mask=00000000 <7> [171.249340] i915 device info: EU total: 24 <7> [171.249342] i915 device info: EU per subslice: 8 <7> [171.249344] i915 device info: has slice power gating: no <7> [171.249346] i915 device info: has subslice power gating: no <7> [171.249347] i915 device info: has EU power gating: yes <6> [171.249349] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [171.249352] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [171.249354] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [171.250191] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [171.251008] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [171.251642] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] status updated from unknown to disconnected <7> [171.251659] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [171.251667] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [171.251674] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [171.252742] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [171.252969] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [171.253491] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [171.253803] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [171.253811] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [171.254030] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [171.259294] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [171.259302] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [171.259535] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected <7> [171.259549] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [171.259555] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [171.259561] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [171.259565] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [171.259569] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [171.259639] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [171.259652] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [171.259676] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [171.259686] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [171.260661] [drm:drm_client_modeset_probe] <7> [171.260694] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [171.260700] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [171.260963] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [171.260968] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [171.260973] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [171.262881] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [171.264009] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [171.264120] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [171.264833] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [171.264841] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [171.264846] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [171.265847] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [171.266018] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [171.266402] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [171.266563] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [171.266569] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [171.266714] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [171.271081] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [171.271089] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [171.271304] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [171.271311] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [171.271316] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [171.271321] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [171.271325] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [171.271365] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [171.271376] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [171.271414] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [171.271416] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [171.271432] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [171.271422] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [171.271504] [drm:drm_client_modeset_probe] <7> [171.271704] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [171.271710] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [171.271719] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [171.271962] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [171.271970] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [171.271976] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [171.273361] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [171.274354] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [171.275158] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [171.275167] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [171.275174] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [171.275743] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [171.275922] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [171.276376] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [171.276617] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [171.276625] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [171.276839] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [171.281431] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [171.281439] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [171.281671] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [171.281678] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [171.281683] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [171.281688] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [171.281692] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [171.281728] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [171.281752] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [171.281792] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [171.281802] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [171.281850] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [171.281856] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [171.283024] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [171.284184] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [171.285026] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [171.285087] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [171.285092] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [171.285744] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [171.285889] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [171.286290] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [171.286458] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [171.286462] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [171.286576] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [171.290768] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [171.290772] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [171.290900] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [171.293432] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [171.293438] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [171.293645] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [171.294063] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [171.294068] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [171.295236] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [171.296376] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [171.297228] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [171.297692] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [171.297698] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [171.298113] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [171.298232] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [171.298656] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [171.298847] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [171.298851] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [171.298965] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [171.303047] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [171.303052] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [171.303180] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [171.303471] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] <7> [171.303475] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [171.303682] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected <7> [171.303700] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] <7> [171.303704] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [171.304988] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [171.305868] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [171.306664] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected <7> [171.306682] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] <7> [171.306685] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [171.307113] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [171.307272] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [171.307676] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [171.307842] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [171.307846] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [171.307959] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [171.311993] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [171.311998] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [171.312123] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected <7> [171.506257] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [171.507166] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [171.507641] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [171.508201] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [171.509262] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.361885] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.371161] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.396657] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.406405] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.406738] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.407337] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.408793] [drm:drm_mode_setcrtc] [CRTC:51:pipe A] <7> [182.408710] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.409419] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.410103] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.410701] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.412703] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.413559] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.414348] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.415037] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.415158] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.415530] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.415740] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.415747] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.415862] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.420146] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.420151] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.420463] [drm:drm_mode_setcrtc] [CRTC:72:pipe B] <7> [182.420566] [drm:drm_mode_setcrtc] [CRTC:93:pipe C] <7> [182.521722] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.539753] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.540039] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.540286] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.541013] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.542139] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.547638] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.727079] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.735378] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.736223] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.736645] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.737053] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.737781] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.738346] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.738661] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [182.738918] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [182.739109] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [182.739300] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [182.739549] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.740984] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.742251] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.743086] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.743536] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.743677] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.744073] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.744243] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.744248] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.744373] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.748564] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.748572] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.770165] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [182.824388] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <6> [183.050489] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS <6> [183.050534] [IGT] i915_pm_rpm: exiting, ret=0

<6> [144.884070] [IGT] i915_pm_rpm: executing

<7> [144.891752] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [144.892455] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [144.892462] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [144.892785] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [144.892851] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [144.892856] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [144.893052] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [144.894933] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [144.896107] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [144.896924] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [144.896983] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [144.896987] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [144.897642] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [144.897847] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [144.898306] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [144.898484] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [144.898488] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [144.898612] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [144.902680] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [144.902686] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [144.902820] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [144.906464] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [144.906470] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [144.906655] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [144.907099] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [144.907105] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [144.908435] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [144.909649] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [144.910509] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [144.910960] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [144.910965] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [144.911381] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [144.911506] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [144.912003] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [144.912213] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [144.912220] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [144.912345] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [144.916544] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [144.916549] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [144.916698] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [144.916996] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [144.917001] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [144.917164] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [144.917179] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [144.917183] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [144.918402] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [144.919571] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [144.920428] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [144.920448] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [144.920452] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [144.920943] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [144.921060] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [144.921428] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [144.921577] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [144.921581] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [144.921739] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [144.925800] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [144.925805] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [144.925932] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [145.025652] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [145.025825] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [145.025961] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [145.026092] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [145.026692] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [155.976969] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [155.983034] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [156.007669] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [156.014866] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [156.015503] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]

<7> [156.015721] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [156.015965] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [156.016576] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [156.017762] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [156.018224] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [156.018658] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]

<7> [156.018619] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [156.020708] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [156.021659] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [156.022559] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [156.023284] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [156.023406] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [156.023777] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [156.023935] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [156.023940] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [156.024053] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [156.028106] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [156.028111] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [156.028392] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]

<7> [156.137776] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [156.138085] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [156.138335] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [156.138578] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [156.139311] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [156.140299] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [156.144583] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [156.231172] [IGT] i915_pm_rpm: starting subtest module-reload

<7> [156.349768] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [156.357119] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [156.357395] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [156.357860] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [156.358476] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [156.359125] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [156.359692] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [156.360033] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [156.360369] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [156.360718] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [156.361080] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [156.361481] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [156.363638] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [156.364491] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [156.365196] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [156.365753] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [156.365962] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [156.366430] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [156.366699] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [156.366708] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [156.366910] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [156.371188] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [156.371192] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [156.390453] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [156.434969] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<6> [156.668379] [IGT] Reloading i915 w/o display

<7> [156.821314] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [156.821547] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [156.821772] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH

<7> [156.821988] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [156.822207] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [156.822349] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz

<7> [156.822947] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [156.823072] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [156.823203] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M

<6> [156.823314] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [156.823318] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [156.823539] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [156.823554] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047

<7> [156.823752] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K

<7> [156.824082] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018

<7> [156.824250] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [156.824396] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [156.824538] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [156.824703] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [156.828644] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [156.828804] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [156.828954] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [156.829124] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [156.829319] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [156.829475] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [156.829620] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [156.829779] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [156.829887] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [156.829990] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [156.830091] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [156.830191] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [156.830294] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [156.830396] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [156.830986] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [156.831169] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196

<7> [156.831329] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [156.831487] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [156.831691] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [156.831886] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [156.832043] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812)

<7> [156.832200] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34)

<7> [156.832369] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [156.832527] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [156.832734] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [156.832927] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [156.833086] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [156.833274] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [156.833452] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6

<7> [156.833637] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [156.833846] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [156.834006] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [156.834163] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [156.834319] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [156.834474] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [156.834654] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3

<7> [156.834859] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [156.835014] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3

<7> [156.835167] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [156.835333] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [156.835521] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [156.835696] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [156.835886] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [156.836450] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [156.836618] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [156.836821] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [156.837053] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [156.837235] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [156.837389] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [156.837555] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [156.837790] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [156.837979] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [156.838135] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [156.838291] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [156.838480] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<7> [156.839097] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [156.839257] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [156.839409] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [156.839560] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [156.839953] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<6> [156.840099] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [156.840391] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [156.840548] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [156.840766] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [156.840929] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [156.841073] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [156.841217] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [156.841363] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [156.841509] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [156.841685] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [156.841848] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [156.843098] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [156.844780] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [156.845123] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] Using AUX CH A (VBT)

<7> [156.845360] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A]

<7> [156.847659] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [156.847822] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [156.847993] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [156.848156] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static

<7> [156.848319] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [156.848509] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [156.848772] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [156.848951] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [156.849106] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [156.849260] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0

<7> [156.849416] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1

<7> [156.849643] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0

<7> [156.849896] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [156.850036] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [156.850173] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [156.850309] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [156.850445] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [156.850720] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [156.851068] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on

<7> [156.851235] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [156.851455] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [156.851690] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [156.851937] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [156.852117] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [157.069278] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.079600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.090602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.101602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.112601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.123601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.134602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.145602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.156601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.167602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.178600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.189602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.200600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.211602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.222600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.233603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.244600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.255602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.266601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.277603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.288602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.299601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.310601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.321603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.332600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.343600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.354601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.365602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.376600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.387600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.398601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.409602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [157.409831] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110

<6> [157.409847] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP

<7> [157.409909] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off

<7> [157.410117] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [157.410375] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] Using AUX CH B (VBT)

<7> [157.410539] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B]

<7> [157.421603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.432600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.443602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.454601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.465602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.476600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.487602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.498601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.509603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.520601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.531602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.542601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.553602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.564601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.575601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.586600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.597602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.608600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.619601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.630600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.641602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.652600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.663602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.674601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.685602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.696600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.707602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.718601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.729602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.740600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.751602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.762601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.762815] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX B/DDI B/PHY B: Too many retries, giving up. First error: -110

<7> [157.762827] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel

<7> [157.773603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.784601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.795601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.806601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.817602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.828600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.839601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.850601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.861602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.872600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.883601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.894600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.905602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.916602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.927600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.938600] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.949602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.960601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.971602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.982601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [157.993602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.004602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.015601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.026602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.037603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.048601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.059601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.070601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.081602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.092601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.103601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.114601] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [158.114816] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX B/DDI B/PHY B: Too many retries, giving up. First error: -110

<7> [158.114828] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [158.114991] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DDI C/PHY C] Using AUX CH C (VBT)

<7> [158.115153] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C]

<7> [158.116263] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel

<7> [158.117270] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [158.117427] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C]

<7> [158.117647] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:106:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [158.118019] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [158.118242] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [158.118459] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [158.118636] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [158.118830] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [158.119008] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [158.119176] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [158.119398] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [158.119585] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [158.119780] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [158.119969] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [158.120133] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [158.120299] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [158.120448] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A

<7> [158.120604] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B

<7> [158.120771] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C

<7> [158.120937] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [158.121085] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A

<7> [158.121234] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B

<7> [158.121383] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C

<7> [158.121550] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [158.121728] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [158.121920] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [158.122089] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [158.122301] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled

<7> [158.122490] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled

<7> [158.122735] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled

<7> [158.122966] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [158.123198] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [158.123353] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [158.123530] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [158.123694] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [158.123869] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [158.124016] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [158.124165] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [158.124324] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [158.124474] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [158.124633] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [158.124802] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [158.125015] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [158.125172] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [158.125328] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [158.125484] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [158.125649] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [158.125817] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [158.125964] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [158.126144] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [158.126265] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [158.126408] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [158.126559] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 6 GT workarounds on global

<7> [158.128703] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [158.128855] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [158.128996] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 14 context workarounds on rcs'0

<7> [158.141540] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [158.141693] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [158.141816] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [158.141936] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [158.142215] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [158.142424] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [158.142579] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [158.142744] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [158.142979] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [158.143218] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [158.147821] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [158.148865] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event

<7> [158.149445] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [158.150453] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event

<7> [158.150815] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event

<6> [158.150871] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0

<7> [158.152339] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected

<6> [158.165778] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [158.167965] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7

<7> [158.169577] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [158.170336] i915 display info: display version: 9

<7> [158.170339] i915 display info: cursor_needs_physical: no

<7> [158.170341] i915 display info: has_cdclk_crawl: no

<7> [158.170342] i915 display info: has_cdclk_squash: no

<7> [158.170344] i915 display info: has_ddi: yes

<7> [158.170345] i915 display info: has_dp_mst: yes

<7> [158.170347] i915 display info: has_dsb: no

<7> [158.170348] i915 display info: has_fpga_dbg: yes

<7> [158.170347] [drm:drm_client_modeset_probe]

<7> [158.170350] i915 display info: has_gmch: no

<7> [158.170351] i915 display info: has_hotplug: yes

<7> [158.170353] i915 display info: has_hti: no

<7> [158.170354] i915 display info: has_ipc: yes

<7> [158.170356] i915 display info: has_overlay: no

<7> [158.170357] i915 display info: has_psr: yes

<7> [158.170358] i915 display info: has_psr_hw_tracking: yes

<7> [158.170360] i915 display info: overlay_needs_physical: no

<7> [158.170361] i915 display info: supports_tv: no

<7> [158.170363] i915 display info: has_hdcp: yes

<7> [158.170364] i915 display info: has_dmc: yes

<7> [158.170365] i915 display info: has_dsc: no

<7> [158.170383] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [158.170368] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [158.170391] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [158.170565] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] status updated from unknown to disconnected

<7> [158.170580] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [158.170588] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [158.170548] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [158.170612] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [158.170804] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] status updated from unknown to disconnected

<7> [158.170812] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [158.170816] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [158.170763] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [158.170821] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [158.170965] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected

<7> [158.170972] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [158.170975] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [158.170978] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [158.170981] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [158.170983] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [158.171008] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [158.171016] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [158.171030] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [158.171037] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [158.171000] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [158.171587] [drm:drm_client_modeset_probe]

<7> [158.171644] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [158.171652] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [158.171863] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [158.171868] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [158.171777] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [158.171872] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [158.172003] i915 device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9

<7> [158.172007] i915 device info: graphics version: 9

<7> [158.172010] i915 device info: media version: 9

<7> [158.172012] i915 device info: graphics stepping: F0

<7> [158.172014] i915 device info: media stepping: F0

<7> [158.172016] i915 device info: display stepping: C0

<7> [158.172018] i915 device info: base die stepping: **

<7> [158.172021] i915 device info: gt: 2

<7> [158.172023] i915 device info: memory-regions: 0x21

<7> [158.172025] i915 device info: page-sizes: 0x11000

<7> [158.172027] i915 device info: platform: KABYLAKE

<7> [158.172029] i915 device info: ppgtt-size: 48

<7> [158.172032] i915 device info: ppgtt-type: 2

<7> [158.172034] i915 device info: dma_mask_size: 39

<7> [158.172036] i915 device info: is_mobile: no

<7> [158.172038] i915 device info: is_lp: no

<7> [158.172041] i915 device info: require_force_probe: no

<7> [158.172043] i915 device info: is_dgfx: no

<7> [158.172045] i915 device info: has_64bit_reloc: yes

<7> [158.172047] i915 device info: has_64k_pages: no

<7> [158.172049] i915 device info: gpu_reset_clobbers_display: no

<7> [158.172051] i915 device info: has_reset_engine: yes

<7> [158.172054] i915 device info: has_3d_pipeline: yes

<7> [158.172056] i915 device info: has_flat_ccs: no

<7> [158.172058] i915 device info: has_global_mocs: no

<7> [158.172060] i915 device info: has_gmd_id: no

<7> [158.172062] i915 device info: has_gt_uc: yes

<7> [158.172064] i915 device info: has_heci_pxp: no

<7> [158.172067] i915 device info: has_heci_gscfi: no

<7> [158.172069] i915 device info: has_guc_deprivilege: no

<7> [158.172077] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [158.172082] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [158.172085] i915 device info: has_guc_tlb_invalidation: no

<7> [158.172087] i915 device info: has_l3_ccs_read: no

<7> [158.172090] i915 device info: has_l3_dpf: no

<7> [158.172093] i915 device info: has_llc: yes

<7> [158.172095] i915 device info: has_logical_ring_contexts: yes

<7> [158.172098] i915 device info: has_logical_ring_elsq: no

<7> [158.172100] i915 device info: has_media_ratio_mode: no

<7> [158.172103] i915 device info: has_mslice_steering: no

<7> [158.172106] i915 device info: has_oa_bpc_reporting: no

<7> [158.172108] i915 device info: has_oa_slice_contrib_limits: no

<7> [158.172111] i915 device info: has_oam: no

<7> [158.172114] i915 device info: has_one_eu_per_fuse_bit: no

<7> [158.172116] i915 device info: has_pxp: no

<7> [158.172119] i915 device info: has_rc6: yes

<7> [158.172121] i915 device info: has_rc6p: no

<7> [158.172124] i915 device info: has_rps: yes

<7> [158.172126] i915 device info: has_runtime_pm: yes

<7> [158.172129] i915 device info: has_snoop: no

<7> [158.172131] i915 device info: has_coherent_ggtt: yes

<7> [158.172134] i915 device info: tuning_thread_rr_after_dep: no

<7> [158.172137] i915 device info: unfenced_needs_alignment: no

<7> [158.172139] i915 device info: hws_needs_physical: no

<7> [158.172142] i915 device info: has_pooled_eu: no

<7> [158.172144] i915 device info: rawclk rate: 24000 kHz

<7> [158.172147] i915 device info: iommu: enabled

<7> [158.172150] i915 device info: available engines: 40403

<7> [158.172153] i915 device info: slice total: 1, mask=0001

<7> [158.172156] i915 device info: subslice total: 3

<7> [158.172159] i915 device info: slice0: 3 subslices, mask=00000007

<7> [158.172162] i915 device info: slice1: 0 subslices, mask=00000000

<7> [158.172165] i915 device info: slice2: 0 subslices, mask=00000000

<7> [158.172168] i915 device info: EU total: 24

<7> [158.172170] i915 device info: EU per subslice: 8

<7> [158.172173] i915 device info: has slice power gating: no

<7> [158.172175] i915 device info: has subslice power gating: no

<7> [158.172178] i915 device info: has EU power gating: yes

<6> [158.172181] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [158.172184] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [158.172186] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [158.172090] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [158.172302] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [158.172308] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [158.172313] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [158.172317] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [158.172321] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [158.172359] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [158.172370] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [158.172390] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [158.172399] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [158.177703] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [158.322266] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [158.323186] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [158.323671] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [158.324217] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [158.325139] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [168.793787] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [168.798669] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [169.239822] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [169.249686] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [169.250762] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [169.251523] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [169.252033] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [169.252484] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [169.252956] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [169.253556] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [169.256584] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [169.455743] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [169.463179] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [169.463536] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [169.464088] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [169.464837] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [169.465573] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [169.466176] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [169.466522] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [169.466882] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [169.467291] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [169.467675] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [169.468521] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [169.468766] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [169.495493] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [169.550668] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<6> [169.767404] [IGT] Reloading i915 as normal

<7> [169.903722] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [169.903966] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [169.904135] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH

<7> [169.904288] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [169.904488] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [169.904701] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz

<7> [169.905388] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [169.905523] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [169.905656] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M

<6> [169.905779] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [169.905783] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [169.906010] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [169.906026] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047

<7> [169.906177] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K

<7> [169.906493] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018

<7> [169.906719] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [169.906891] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [169.907043] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [169.907195] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [169.911360] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [169.911521] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [169.911742] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [169.911913] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [169.912126] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [169.912237] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [169.912340] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [169.912444] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [169.912551] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [169.912659] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [169.912792] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [169.912894] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [169.912994] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [169.913099] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [169.913765] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [169.913943] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196

<7> [169.914102] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [169.914260] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [169.914420] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [169.914578] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [169.914747] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812)

<7> [169.914931] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34)

<7> [169.915089] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [169.915267] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [169.915430] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [169.915644] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [169.915873] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [169.916026] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [169.916181] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6

<7> [169.916341] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [169.916500] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [169.916664] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [169.916841] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [169.916996] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [169.917150] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [169.917302] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3

<7> [169.917452] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [169.917614] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3

<7> [169.917792] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [169.917956] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [169.918144] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [169.918315] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [169.918471] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [169.919003] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [169.919162] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [169.919353] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [169.919613] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [169.919833] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [169.919986] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [169.920149] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [169.920338] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [169.920496] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [169.920659] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [169.920836] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [169.921024] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<7> [169.921620] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [169.921846] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [169.922065] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [169.922133] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [169.922296] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [169.922787] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<6> [169.923088] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [169.922980] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [169.923204] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [169.923384] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [169.923527] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [169.923781] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [169.923942] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [169.924088] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [169.924233] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [169.924378] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [169.925649] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [169.926584] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [169.926864] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] Using AUX CH A (VBT)

<7> [169.927061] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A]

<7> [169.929660] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [169.929840] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [169.929996] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [169.930165] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static

<7> [169.930345] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [169.930518] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [169.930720] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [169.930948] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [169.931102] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [169.931256] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0

<7> [169.931411] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1

<7> [169.931642] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0

<7> [169.931871] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [169.932012] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [169.932152] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [169.932288] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [169.932425] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [169.932712] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [169.933063] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on

<7> [169.933230] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [169.933439] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [169.933670] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [169.933884] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [169.934070] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [170.148603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.159603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.170606] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.181603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.192603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.203604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.214605] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.225602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.236603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.247604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.258605] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.269602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.280603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.291605] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.302603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.313603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.324604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.335604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.346603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.357603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.368604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.379604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.390603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.401603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.412604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.423604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.434603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.445603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.456603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.467605] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.478603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.489603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [170.489840] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110

<6> [170.489853] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP

<7> [170.489915] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off

<7> [170.490119] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [170.490371] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] Using AUX CH B (VBT)

<7> [170.490531] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B]

<7> [170.501604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.512603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.523605] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.534603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.545699] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.556604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.567604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.578603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.589604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.600603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.611604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.622603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.633603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.644603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.655605] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.666604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.677603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.688603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.699605] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.710603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.721603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.732603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.743605] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.754603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.765603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.776603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.787605] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.798603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.809603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.820604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.831605] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.842602] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.842812] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX B/DDI B/PHY B: Too many retries, giving up. First error: -110

<7> [170.842825] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel

<7> [170.853603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.864604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.875604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.886603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.897603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.908604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.919604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.930603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.941603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.952604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.963604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.974603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.985603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [170.996604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.007605] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.018605] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.029603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.040603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.051604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.062603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.073603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.084604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.095605] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.106603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.117603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.128603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.139604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.150603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.161603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.172604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.183604] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.194603] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX B/DDI B/PHY B: timeout (status 0x7d40023f)

<7> [171.194830] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX B/DDI B/PHY B: Too many retries, giving up. First error: -110

<7> [171.194842] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [171.195001] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DDI C/PHY C] Using AUX CH C (VBT)

<7> [171.195157] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C]

<7> [171.196255] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] Panel replay is not supported by panel

<7> [171.197214] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [171.197387] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C]

<7> [171.197526] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:106:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [171.197927] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [171.198147] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [171.198366] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [171.198529] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [171.198703] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [171.198904] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [171.199069] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [171.199286] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [171.199467] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [171.199643] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [171.199849] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [171.200014] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [171.200180] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [171.200328] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A

<7> [171.200478] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B

<7> [171.200649] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C

<7> [171.200865] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [171.201010] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A

<7> [171.201158] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B

<7> [171.201306] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C

<7> [171.201473] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [171.201671] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [171.201891] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [171.202060] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [171.202265] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled

<7> [171.202444] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled

<7> [171.202668] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled

<7> [171.202854] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [171.203003] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [171.203185] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [171.203367] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [171.203526] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [171.203685] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [171.203834] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [171.203982] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [171.204141] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [171.204292] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [171.204442] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [171.204590] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [171.204804] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [171.204963] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [171.205118] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [171.205274] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [171.205430] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [171.205579] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [171.205732] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [171.205911] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [171.206032] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [171.206161] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [171.206311] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 6 GT workarounds on global

<7> [171.208334] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [171.208485] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [171.208640] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 14 context workarounds on rcs'0

<7> [171.219861] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [171.220005] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [171.220129] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [171.220249] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [171.220514] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [171.220859] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [171.221027] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [171.221172] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [171.221315] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [171.221478] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [171.225156] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [171.226138] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event

<7> [171.226719] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [171.227640] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event

<7> [171.228243] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event

<6> [171.228308] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0

<7> [171.230459] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected

<6> [171.243428] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [171.245565] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8

<7> [171.246175] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [171.247297] i915 display info: display version: 9

<7> [171.247297] [drm:drm_client_modeset_probe]

<7> [171.247302] i915 display info: cursor_needs_physical: no

<7> [171.247305] i915 display info: has_cdclk_crawl: no

<7> [171.247307] i915 display info: has_cdclk_squash: no

<7> [171.247310] i915 display info: has_ddi: yes

<7> [171.247312] i915 display info: has_dp_mst: yes

<7> [171.247315] i915 display info: has_dsb: no

<7> [171.247317] i915 display info: has_fpga_dbg: yes

<7> [171.247319] i915 display info: has_gmch: no

<7> [171.247322] i915 display info: has_hotplug: yes

<7> [171.247325] i915 display info: has_hti: no

<7> [171.247327] i915 display info: has_ipc: yes

<7> [171.247330] i915 display info: has_overlay: no

<7> [171.247330] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [171.247332] i915 display info: has_psr: yes

<7> [171.247335] i915 display info: has_psr_hw_tracking: yes

<7> [171.247338] i915 display info: overlay_needs_physical: no

<7> [171.247341] i915 display info: supports_tv: no

<7> [171.247343] i915 display info: has_hdcp: yes

<7> [171.247345] i915 display info: has_dmc: yes

<7> [171.247348] i915 display info: has_dsc: no

<7> [171.247345] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [171.247352] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [171.247619] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [171.247856] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [171.248085] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [171.248491] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] status updated from unknown to disconnected

<7> [171.248508] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [171.248516] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [171.248523] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [171.248967] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [171.249194] i915 device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9

<7> [171.249198] i915 device info: graphics version: 9

<7> [171.249201] i915 device info: media version: 9

<7> [171.249204] i915 device info: graphics stepping: F0

<7> [171.249206] i915 device info: media stepping: F0

<7> [171.249209] i915 device info: display stepping: C0

<7> [171.249211] i915 device info: base die stepping: **

<7> [171.249214] i915 device info: gt: 2

<7> [171.249216] i915 device info: memory-regions: 0x21

<7> [171.249219] i915 device info: page-sizes: 0x11000

<7> [171.249222] i915 device info: platform: KABYLAKE

<7> [171.249224] i915 device info: ppgtt-size: 48

<7> [171.249227] i915 device info: ppgtt-type: 2

<7> [171.249229] i915 device info: dma_mask_size: 39

<7> [171.249232] i915 device info: is_mobile: no

<7> [171.249234] i915 device info: is_lp: no

<7> [171.249237] i915 device info: require_force_probe: no

<7> [171.249239] i915 device info: is_dgfx: no

<7> [171.249242] i915 device info: has_64bit_reloc: yes

<7> [171.249244] i915 device info: has_64k_pages: no

<7> [171.249246] i915 device info: gpu_reset_clobbers_display: no

<7> [171.249249] i915 device info: has_reset_engine: yes

<7> [171.249251] i915 device info: has_3d_pipeline: yes

<7> [171.249254] i915 device info: has_flat_ccs: no

<7> [171.249256] i915 device info: has_global_mocs: no

<7> [171.249259] i915 device info: has_gmd_id: no

<7> [171.249261] i915 device info: has_gt_uc: yes

<7> [171.249263] i915 device info: has_heci_pxp: no

<7> [171.249265] i915 device info: has_heci_gscfi: no

<7> [171.249268] i915 device info: has_guc_deprivilege: no

<7> [171.249270] i915 device info: has_guc_tlb_invalidation: no

<7> [171.249273] i915 device info: has_l3_ccs_read: no

<7> [171.249275] i915 device info: has_l3_dpf: no

<7> [171.249277] i915 device info: has_llc: yes

<7> [171.249280] i915 device info: has_logical_ring_contexts: yes

<7> [171.249282] i915 device info: has_logical_ring_elsq: no

<7> [171.249285] i915 device info: has_media_ratio_mode: no

<7> [171.249287] i915 device info: has_mslice_steering: no

<7> [171.249289] i915 device info: has_oa_bpc_reporting: no

<7> [171.249291] i915 device info: has_oa_slice_contrib_limits: no

<7> [171.249292] i915 device info: has_oam: no

<7> [171.249294] i915 device info: has_one_eu_per_fuse_bit: no

<7> [171.249296] i915 device info: has_pxp: no

<7> [171.249298] i915 device info: has_rc6: yes

<7> [171.249300] i915 device info: has_rc6p: no

<7> [171.249302] i915 device info: has_rps: yes

<7> [171.249305] i915 device info: has_runtime_pm: yes

<7> [171.249307] i915 device info: has_snoop: no

<7> [171.249309] i915 device info: has_coherent_ggtt: yes

<7> [171.249311] i915 device info: tuning_thread_rr_after_dep: no

<7> [171.249313] i915 device info: unfenced_needs_alignment: no

<7> [171.249315] i915 device info: hws_needs_physical: no

<7> [171.249317] i915 device info: has_pooled_eu: no

<7> [171.249319] i915 device info: rawclk rate: 24000 kHz

<7> [171.249322] i915 device info: iommu: enabled

<7> [171.249325] i915 device info: available engines: 40403

<7> [171.249327] i915 device info: slice total: 1, mask=0001

<7> [171.249330] i915 device info: subslice total: 3

<7> [171.249332] i915 device info: slice0: 3 subslices, mask=00000007

<7> [171.249335] i915 device info: slice1: 0 subslices, mask=00000000

<7> [171.249338] i915 device info: slice2: 0 subslices, mask=00000000

<7> [171.249340] i915 device info: EU total: 24

<7> [171.249342] i915 device info: EU per subslice: 8

<7> [171.249344] i915 device info: has slice power gating: no

<7> [171.249346] i915 device info: has subslice power gating: no

<7> [171.249347] i915 device info: has EU power gating: yes

<6> [171.249349] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [171.249352] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [171.249354] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [171.250191] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [171.251008] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [171.251642] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] status updated from unknown to disconnected

<7> [171.251659] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [171.251667] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [171.251674] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [171.252742] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [171.252969] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [171.253491] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [171.253803] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [171.253811] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [171.254030] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [171.259294] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [171.259302] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [171.259535] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected

<7> [171.259549] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [171.259555] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [171.259561] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [171.259565] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [171.259569] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [171.259639] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [171.259652] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [171.259676] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [171.259686] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [171.260661] [drm:drm_client_modeset_probe]

<7> [171.260694] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [171.260700] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [171.260963] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [171.260968] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [171.260973] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [171.262881] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [171.264009] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [171.264120] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [171.264833] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [171.264841] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [171.264846] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [171.265847] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [171.266018] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [171.266402] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [171.266563] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [171.266569] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [171.266714] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [171.271081] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [171.271089] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [171.271304] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [171.271311] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [171.271316] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [171.271321] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [171.271325] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [171.271365] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [171.271376] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [171.271414] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [171.271416] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [171.271432] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [171.271422] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [171.271504] [drm:drm_client_modeset_probe]

<7> [171.271704] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [171.271710] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [171.271719] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [171.271962] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [171.271970] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [171.271976] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [171.273361] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [171.274354] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [171.275158] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [171.275167] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [171.275174] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [171.275743] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [171.275922] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [171.276376] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [171.276617] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [171.276625] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [171.276839] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [171.281431] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [171.281439] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [171.281671] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [171.281678] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [171.281683] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [171.281688] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [171.281692] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [171.281728] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [171.281752] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [171.281792] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [171.281802] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [171.281850] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [171.281856] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [171.283024] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [171.284184] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [171.285026] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [171.285087] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [171.285092] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [171.285744] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [171.285889] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [171.286290] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [171.286458] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [171.286462] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [171.286576] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [171.290768] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [171.290772] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [171.290900] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [171.293432] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [171.293438] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [171.293645] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [171.294063] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [171.294068] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [171.295236] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [171.296376] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [171.297228] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [171.297692] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [171.297698] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [171.298113] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [171.298232] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [171.298656] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [171.298847] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [171.298851] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [171.298965] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [171.303047] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [171.303052] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [171.303180] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [171.303471] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1]

<7> [171.303475] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [171.303682] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:DP-1] disconnected

<7> [171.303700] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2]

<7> [171.303704] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [171.304988] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [171.305868] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [171.306664] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:DP-2] disconnected

<7> [171.306682] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]

<7> [171.306685] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [171.307113] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [171.307272] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [171.307676] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [171.307842] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [171.307846] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [171.307959] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [171.311993] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [171.311998] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [171.312123] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [171.506257] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [171.507166] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [171.507641] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [171.508201] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [171.509262] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [182.361885] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [182.371161] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [182.396657] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [182.406405] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [182.406738] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [182.407337] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [182.408793] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]

<7> [182.408710] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [182.409419] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [182.410103] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [182.410701] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [182.412703] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [182.413559] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [182.414348] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [182.415037] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [182.415158] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [182.415530] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [182.415740] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [182.415747] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [182.415862] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [182.420146] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [182.420151] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [182.420463] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]

<7> [182.420566] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]

<7> [182.521722] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [182.539753] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [182.540039] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [182.540286] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [182.541013] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [182.542139] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [182.547638] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [182.727079] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [182.735378] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [182.736223] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [182.736645] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [182.737053] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [182.737781] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [182.738346] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [182.738661] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [182.738918] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [182.739109] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [182.739300] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [182.739549] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [182.740984] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [182.742251] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [182.743086] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [182.743536] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [182.743677] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [182.744073] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [182.744243] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [182.744248] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [182.744373] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [182.748564] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [182.748572] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [182.770165] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [182.824388] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<6> [183.050489] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS

<6> [183.050534] [IGT] i915_pm_rpm: exiting, ret=0

Results for igt@i915_pm_rpm@module-reload